Microsoft.PowerApps.Administration.PowerShell

Author(s)

• Microsoft Common Data Service Team

Functions

New-AdminPowerAppCdsDatabase Get-AdminPowerAppCdsDatabaseLanguages Get-AdminPowerAppCdsDatabaseCurrencies Get-AdminPowerAppEnvironmentLocations Get-AdminPowerAppCdsDatabaseTemplates New-AdminPowerAppEnvironment Set-AdminPowerAppEnvironmentDisplayName Set-AdminPowerAppEnvironmentRuntimeState Get-AdminPowerAppEnvironment Get-AdminPowerAppSoftDeletedEnvironment Get-AdminPowerAppOperationStatus Remove-AdminPowerAppEnvironment Recover-AdminPowerAppEnvironment Reset-PowerAppEnvironment Get-AdminPowerAppEnvironmentRoleAssignment Set-AdminPowerAppEnvironmentRoleAssignment Remove-AdminPowerAppEnvironmentRoleAssignment Get-AdminPowerApp Remove-AdminPowerApp Get-AdminPowerAppRoleAssignment Remove-AdminPowerAppRoleAssignment Set-AdminPowerAppRoleAssignment Set-AdminPowerAppOwner Get-AdminFlow Add-PowerAppsCustomBrandingAssets Enable-AdminFlow Disable-AdminFlow Remove-AdminFlow Remove-AdminFlowApprovals Set-AdminFlowOwnerRole Remove-AdminFlowOwnerRole Get-AdminFlowOwnerRole Get-AdminPowerAppConnector Get-AdminPowerAppConnectorAction Get-AdminPowerAppConnectorRoleAssignment Set-AdminPowerAppConnectorRoleAssignment Remove-AdminPowerAppConnectorRoleAssignment Remove-AdminPowerAppConnector Get-AdminPowerAppConnection Remove-AdminPowerAppConnection Get-AdminPowerAppConnectionRoleAssignment Set-AdminPowerAppConnectionRoleAssignment Remove-AdminPowerAppConnectionRoleAssignment Get-AdminPowerAppsUserDetails Get-AdminFlowUserDetails Remove-AdminFlowUserDetails Set-AdminPowerAppAsFeatured Clear-AdminPowerAppAsFeatured Set-AdminPowerAppAsHero Clear-AdminPowerAppAsHero Set-AppAsUnquarantined Set-AppAsQuarantined Get-AppQuarantineState Set-AdminPowerAppApisToBypassConsent Clear-AdminPowerAppApisToBypassConsent Get-AdminPowerAppConditionalAccessAuthenticationContextIds Set-AdminPowerAppConditionalAccessAuthenticationContextIds Remove-AdminPowerAppConditionalAccessAuthenticationContextIds Get-AdminDlpPolicy New-AdminDlpPolicy Remove-AdminDlpPolicy Set-AdminDlpPolicy Add-ConnectorToBusinessDataGroup Remove-ConnectorFromBusinessDataGroup Get-AdminPowerAppConnectionReferences Add-CustomConnectorToPolicy Remove-CustomConnectorFromPolicy Remove-LegacyCDSDatabase Get-AdminDeletedPowerAppsList Get-AdminRecoverDeletedPowerApp Select-CurrentEnvironment Add-PowerAppsAccount Remove-PowerAppsAccount Test-PowerAppsAccount Get-TenantDetailsFromGraph Get-UsersOrGroupsFromGraph Get-JwtToken ReplaceMacro Set-TenantSettings Get-TenantSettings Get-AdminPowerAppTenantConsumedQuota InvokeApi InvokeApiNoParseContent Add-AdminPowerAppsSyncUser Remove-AllowedConsentPlans Add-AllowedConsentPlans Get-AllowedConsentPlans Get-AdminPowerAppCdsAdditionalNotificationEmails Set-AdminPowerAppCdsAdditionalNotificationEmails Get-AdminPowerAppLicenses Set-AdminPowerAppDesiredLogicalName Get-DlpPolicy New-DlpPolicy Remove-DlpPolicy Set-DlpPolicy Get-PowerAppTenantUrlPatterns New-PowerAppTenantUrlPatterns Remove-PowerAppTenantUrlPatterns Get-PowerAppPolicyUrlPatterns New-PowerAppPolicyUrlPatterns Remove-PowerAppPolicyUrlPatterns Get-PowerAppDlpPolicyConnectorConfigurations New-PowerAppDlpPolicyConnectorConfigurations Remove-PowerAppDlpPolicyConnectorConfigurations Set-PowerAppDlpPolicyConnectorConfigurations Copy-PowerAppEnvironment Backup-PowerAppEnvironment Get-PowerAppEnvironmentBackups Restore-PowerAppEnvironment Remove-PowerAppEnvironmentBackup Get-PowerAppManagementApp Get-PowerAppManagementApps New-PowerAppManagementApp Remove-PowerAppManagementApp Get-AdminPowerAppSharepointFormEnvironment Set-AdminPowerAppSharepointFormEnvironment Reset-AdminPowerAppSharepointFormEnvironment Get-PowerAppGenerateProtectionKey Get-PowerAppRetrieveTenantProtectionKey Get-PowerAppRetrieveAvailableTenantProtectionKeys New-PowerAppImportProtectionKey Set-PowerAppProtectionStatus Set-PowerAppTenantProtectionKey Set-PowerAppLockAllEnvironments Set-PowerAppUnlockEnvironment Get-PowerAppTenantIsolationPolicy Set-PowerAppTenantIsolationPolicy Get-PowerAppTenantIsolationOperationStatus Get-PowerAppDlpErrorSettings New-PowerAppDlpErrorSettings Set-PowerAppDlpErrorSettings Remove-PowerAppDlpErrorSettings Get-PowerAppDlpPolicyExemptResources New-PowerAppDlpPolicyExemptResources Remove-PowerAppDlpPolicyExemptResources Set-PowerAppDlpPolicyExemptResources Get-AdminVirtualConnectors Get-PowerAppDlpConnectorBlockingPolicies Get-PowerAppDlpConnectorBlockingPolicy New-PowerAppDlpConnectorBlockingPolicy Set-PowerAppDlpConnectorBlockingPolicy Remove-PowerAppDlpConnectorBlockingPolicy

Dependencies

This module has no dependencies.

Release Notes

Current Release:
2.0.136
   Added new Apis for Connector blocking Policy
       Get-PowerAppDlpConnectorBlockingPolicies,
       Get-PowerAppDlpConnectorBlockingPolicy,
       New-PowerAppDlpConnectorBlockingPolicy,
       Set-PowerAppDlpConnectorBlockingPolicy,
       Remove-PowerAppDlpConnectorBlockingPolicy

2.0.113
   Add Set-AdminPowerAppDesiredLogicalName to enable setting desired logical name for non-solution aware canvas apps

2.0.112
   Add virtual connector call
   Get-AdminVirtualConnectors

2.0.111:
   Added new APIS for DLP Policy Exempt Resources APIs
       Get-PowerAppDlpPolicyExemptResources,
       New-PowerAppDlpPolicyExemptResources,
       Remove-PowerAppDlpPolicyExemptResources,
       Set-PowerAppDlpPolicyExemptResources    

2.0.110:
   Add Teams environment in New-AdminPowerAppEnvironment and add EnvironmentSku filter in Get-AdminPowerAppEnvironment
   
2.0.109:
   Add support for AzureRegion selection in New-AdminPowerAppEnvironment
   Added new APIs for error settings DLP:
       Get-PowerAppDlpErrorSettings,
       New-PowerAppDlpErrorSettings,
       Set-PowerAppDlpErrorSettings,
       Remove-PowerAppDlpErrorSettings

2.0.101:
   Revert "Add-CustomConnectorToPolicy is limited to only work for environment-level policies"

2.0.100:
   Add-CustomConnectorToPolicy is limited to only work for environment-level policies

2.0.96:
   Add tenant isolation APIs
   Skip triggers in Get-AdminPowerAppConnectorAction

2.0.92:
   Fix polling behavior on failures for environment lifecycle operations

2.0.86:
   Add Get-AdminPowerAppConnectorAction API

2.0.81:
   Add new DLP Policy Connector Configurations APIs:
       Get-PowerAppDlpPolicyConnectorConfigurations,
       New-PowerAppDlpPolicyConnectorConfigurations,
       Remove-PowerAppDlpPolicyConnectorConfigurations,
       Set-PowerAppDlpPolicyConnectorConfigurations

2.0.77:
   Add ProtectionKey APIs:
       Get-PowerAppGenerateProtectionKey,
       Get-PowerAppRetrieveTenantProtectionKey,
       Get-PowerAppRetrieveAvailableTenantProtectionKeys,
       New-PowerAppImportProtectionKey,
       Set-PowerAppProtectionStatus,
       Set-PowerAppTenantProtectionKey,
       Set-PowerAppLockAllEnvironments,
       Set-PowerAppUnlockEnvironment

2.0.76:
   Add Get-AdminPowerAppTenantConsumedQuota API and GetProtectedEnvironment parameter for Get-AdminPowerAppEnvironment

2.0.75:
   Add ManagementApp APIs:
       Get-PowerAppManagementApp,
       Get-PowerAppManagementApps,
       New-PowerAppManagementApp,
       Remove-PowerAppManagementApp

   Add Sharepoint Environment APIs:
       Get-AdminPowerAppSharepointFormEnvironment
       Set-AdminPowerAppSharepointFormEnvironment
       Reset-AdminPowerAppSharepointFormEnvironment

2.0.72:
   Fix bugs for SPN error handling

2.0.70:
   Add test automation support
   Added new APIs:
       Get-PowerAppTenantUrlPatterns,
       New-PowerAppTenantUrlPatterns,
       Remove-PowerAppTenantUrlPatterns,
       Get-PowerAppPolicyUrlPatterns,
       New-PowerAppPolicyUrlPatterns,
       Remove-PowerAppPolicyUrlPatterns

2.0.67:
   Add Set-AdminPowerAppEnvironmentRuntimeState API

2.0.66:
   Add SubscriptionBasedTrial SKU support.

2.0.65:
   Add Get-AdminPowerAppOperationStatus API for async scenario support.

2.0.64:
   Added new APIs:
       Copy-PowerAppEnvironment,
       Backup-PowerAppEnvironment,
       Get-PowerAppEnvironmentBackups,
       Restore-PowerAppEnvironment,
       Remove-PowerAppEnvironmentBackup,
       Reset-PowerAppEnvironment

2.0.63:
   Added DoD support. Fix bug PowerShell Cmdlet "Set-AdminPowerAppRoleAssignment" is broken when setting the tenant sharing.

2.0.61:
   BREAKING CHANGE: Changed return value to environment object when New-AdminPowerAppEnvironment CDS provision completed.
   Fixed empty return error bug (error code and error message will be returned when API fails).

2.0.60:
   Add TimeoutInMinutes parameter in New-AdminPowerAppEnvironment to make timeout configurable.
   BREAKING CHANGE: The default timeout is changed to a week (waiting for server timeout).
   Fixed "Cannot bind argument to parameter 'Route' because it is an empty string" exception for New-AdminPowerAppEnvironment.

2.0.59:
   Fixed removing connector from policy that had been added with an invalid connector ID.

2.0.57:
   Fixed pagination problem for Get-DlpPolicy, Get-AdminFlow, and Get-AdminPowerApp.

2.0.56:
   Fixed duplicate key error for ConvertFrom-Json with case-invariant comparison.

2.0.53:
   Added early Public Preview release of DLP (Data Loss Prevention) v2 PowerShell cmdlets

2.0.52:
   Introduced new cmdlets for admins to list and recover deleted Power Apps

2.0.45:
   Fixed missing Example sections for some incorrectly formatted cmdlet headers

2.0.44:
   Added a cmdlet to download a manifest of all user's Power Apps licenses for a tenant

2.0.42:
   Fixed cmdlet deadlock issue when long-running operations reached a timeout condition

2.0.40:
   Fixed set of codes to wait for when long-running operations were checking for status
   Fixed an incorrect error message when creating a CDS database environment failed
   Fixed defective ability to associate new DLP policies with specific environments

2.0.37:
   Fixed bug when deserializing "Common Data Service for Apps" environment information
   Introduced new cmdlets for admins to get and set additional notification emails

2.0.34:
   Added logic to skip filtered flows that could not be deserialized instead of failing
   Fixed bug that prevented paging from working properly when getting all flows as admin

2.0.33:
   Enabled creation of new environments as type Sandbox [addition to Trial and Production]

2.0.31:
   Introduced new cmdlets for admins to list and recover soft-deleted environments

2.0.27:
   Revamp cmdlets to block and allow consent plans in response to breaking service change

2.0.26:
   Fixed a handful of bugs related to parameters to create new CDS database environments

2.0.19:
   Introduced new cmdlet to get all CDS database templates so all inputs are retrievable

2.0.15:
   Introduced new cmdlet to sync licensed and authorized AAD tenant user into environment
   Fixed bugs in limited Private Preview cmdlets for DLP v1 connector Blocking [obsolete]
   Added limited Private Preview cmdlets for DLP v1 connector Blocking [obsolete]

2.0.12:
   Introduced new cmdlets to block and allow consent plans in tenant

2.0.6:
   Added support for the Verbose flag to extend to internal calls