DSCResources/MSFT_xVMHyperV/en-US/about_xVMHyperV.help.txt
.NAME
xVMHyperV .DESCRIPTION Manages VMs in a Hyper-V host. The following properties cannot be changed after VM creation: * VhdPath * Path * Generation ## Requirements * The Hyper-V Role has to be installed on the machine. * The Hyper-V PowerShell module has to be installed on the machine. .PARAMETER Name Key - String Name of the VM .PARAMETER VhdPath Required - String VHD associated with the VM .PARAMETER SwitchName Write - StringArray Virtual switch(es) associated with the VM .PARAMETER State Write - String Allowed values: Running, Paused, Off State of the VM. .PARAMETER Path Write - String Folder where the VM data will be stored .PARAMETER Generation Write - UInt32 Virtual machine generation .PARAMETER StartupMemory Write - UInt64 Startup RAM for the VM. .PARAMETER MinimumMemory Write - UInt64 Minimum RAM for the VM. This enables dynamic memory. .PARAMETER MaximumMemory Write - UInt64 Maximum RAM for the VM. This enable dynamic memory. .PARAMETER MACAddress Write - StringArray MAC address(es) of the VM NICs. .PARAMETER ProcessorCount Write - UInt32 Processor count for the VM .PARAMETER WaitForIP Write - Boolean Waits for VM to get valid IP address. .PARAMETER RestartIfNeeded Write - Boolean If specified, shutdowns and restarts the VM as needed for property changes .PARAMETER Ensure Write - String Allowed values: Present, Absent Should the VM be created or deleted .PARAMETER Notes Write - String Notes about the VM. .PARAMETER SecureBoot Write - Boolean Enable secure boot for Generation 2 VMs. .PARAMETER EnableGuestService Write - Boolean Enable Guest Service Interface for the VM. .PARAMETER AutomaticCheckpointsEnabled Write - Boolean Enable AutomaticCheckpoints for the VM. .PARAMETER ID Read - String VM unique ID .PARAMETER Status Read - String Status of the VM .PARAMETER CPUUsage Read - UInt32 CPU Usage of the VM .PARAMETER MemoryAssigned Read - UInt64 Memory assigned to the VM .PARAMETER Uptime Read - String Uptime of the VM .PARAMETER CreationTime Read - DateTime Creation time of the VM .PARAMETER HasDynamicMemory Read - Boolean Does VM has dynamic memory enabled .PARAMETER NetworkAdapters Read - StringArray Network adapters' IP addresses of the VM |