StatusCake-Helpers.psm1
|
<# .SYNOPSIS Removes the StatusCake Authentication Username and API Key .DESCRIPTION Removes the StatusCake Authentication Username and API Key credential file used by the module. If session switch is used this will remove the credentials added for the session. .PARAMETER Session Switch to remove credentials configured for the session .EXAMPLE C:\PS> Remove-StatusCakeHelperAPIAuth Remove the StatusCake Authentication credential file .EXAMPLE C:\PS> Remove-StatusCakeHelperAPIAuth -Session Remove the StatusCake Authentication credential configured for the session .OUTPUTS Returns a Boolean value on whether authentication removal operation was successful .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Authentication/Remove-StatusCakeHelperAPIAuth.md #> function Remove-StatusCakeHelperAPIAuth { [CmdletBinding(SupportsShouldProcess=$true)] [OutputType([System.Boolean])] Param( [Switch]$Session ) If($Session) { if($PSDefaultParameterValues.ContainsKey("Get-StatusCakeHelperAPIAuth:Credential")) { $PSDefaultParameterValues.Remove("Get-StatusCakeHelperAPIAuth:Credential") } } else { Try { $moduleName = (Get-Command $MyInvocation.MyCommand.Name).Source Remove-Item "$env:userprofile\.$moduleName\$moduleName-Credentials.xml" -Force } Catch { Write-Error $_ Return $false } } Return $true } <# .SYNOPSIS Sets the StatusCake API Username and API Key .DESCRIPTION Sets the StatusCake API Username and API Key used by the module. Credential file will be stored in the user's profile folder under .StatusCake-Helpers folder. If the credential file already exists then the existing credential file will be overwritten otherwise a credential file will be created. To avoid persisting credentials to disk the session switch can be used. .PARAMETER APIKey Statuscake API Key .PARAMETER Credential Credential object containing the username and API Key .PARAMETER Session Switch to configure the credential for the session only and avoid writing them to disk .EXAMPLE C:\PS> Set-StatusCakeHelperAPIAuth -APIKey (Read-Host -AsSecureString -Prompt "Please enter the API key") Set the StatusCake Authentication credential file .EXAMPLE C:\PS> Set-StatusCakeHelperAPIAuth -APIKey (Read-Host -AsSecureString -Prompt "Please enter the API key") -Session Set the StatusCake Authentication credential for the session .INPUTS Credential - Credential object containing the username and API Key .OUTPUTS Returns a Boolean value on whether the authentication credential was successfully set .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Authentication/Set-StatusCakeHelperAPIAuth.md #> function Set-StatusCakeHelperAPIAuth { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] [OutputType([System.Boolean])] Param( [Parameter(Mandatory=$true,ParameterSetName = "APIKey")] [ValidateNotNullOrEmpty()] [securestring] $APIKey, [Parameter(Mandatory=$true,ParameterSetName = "Credential")] [ValidateNotNullOrEmpty()] [Alias('Credentials')] [System.Management.Automation.PSCredential] $Credential, [Switch]$Session ) # If API key provided create a credential object from this If($APIKey) { $scCredentials = New-Object System.Management.Automation.PSCredential ("StatusCake API Key", $APIKey) } else { $scCredentials = $Credential } if($Session) { $PSDefaultParameterValues["Get-StatusCakeHelperAPIAuth:Credential"] = $scCredentials } else { Try { $moduleName = (Get-Command $MyInvocation.MyCommand.Name).Source If(! (Test-Path "$env:userprofile\.$moduleName\")) { New-Item "$env:userprofile\.$moduleName" -ItemType Directory | Out-Null } $scCredentials | Export-CliXml -Path "$env:userprofile\.$moduleName\$moduleName-Credentials.xml" } Catch { Write-Error $_ Return $false } } Return $true } <# .SYNOPSIS Tests whether StatusCake API Credentials have been configured .DESCRIPTION Returns a boolean value depending on whether StatusCake API Credentials file for the module exists .EXAMPLE C:\PS> Test-StatusCakeHelperAPIAuthSet Test whether the credential file exists .OUTPUTS Returns a boolean value .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Authentication/Test-StatusCakeHelperAPIAuthSet.md #> function Test-StatusCakeHelperAPIAuthSet { $moduleName = (Get-Command $MyInvocation.MyCommand.Name).Source Return (Test-Path "$env:userprofile\.$moduleName\$moduleName-Credentials.xml" -PathType Leaf) } <# .SYNOPSIS Gets a StatusCake Contact Group, Maintenance Window, PageSpeed, SSL or Uptime item .DESCRIPTION Retrieves a StatusCake item by type. If no name or id is supplied all items of that type are returned. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the item to retrieve .PARAMETER Type Type of item to retrieve .PARAMETER Parameter Hashtable of parameters for the item. The keys and values in the hashtable should match the parameters expected by the StatusCake API. .PARAMETER Limit Number of items to retrieve per page .EXAMPLE C:\PS>Get-StatusCakeHelperItem -Type "PageSpeed" Retrieve all pagespeed tests .EXAMPLE C:\PS>Get-StatusCakeHelperItem -Type "SSL" -ID 1234 Retrieve ssl test information for a test with ID 1234 #> function Get-StatusCakeHelperItem { [CmdletBinding(PositionalBinding=$false,DefaultParameterSetName='All')] [OutputType([System.Collections.Generic.List[PSObject]])] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(Mandatory=$true)] [ValidateSet("Contact-Groups","Heartbeat","Maintenance-Windows","PageSpeed","SSL","Uptime")] [string]$Type, [ValidateNotNullOrEmpty()] [hashtable]$Parameter, [ValidateRange(1,100)] [int]$Limit=25 ) $requestURL = "https://api.statuscake.com/v1/$($Type.ToLower())" $requestParams = @{ Headers = @{"Authorization"="Bearer $($APICredential.GetNetworkCredential().password)"} Method = "Get" ContentType = "application/x-www-form-urlencoded" UseBasicParsing = $true } $itemData = [System.Collections.Generic.List[PSObject]]::new() do { try{ if($ID) { $requestParams["uri"] = "$requestURL/$ID" $response = Invoke-RestMethod @requestParams $itemData = $response.data } else { $page =1 if($Parameter) { $Parameter["limit"] = $Limit } else { $Parameter = @{"limit" = $Limit} } do{ $Parameter["page"] = $page $queryParameters = $Parameter | ConvertTo-StatusCakeHelperXW3FormUrlEncoded $requestParams["uri"] = "$requestURL`?$queryParameters" $response = Invoke-RestMethod @requestParams $response.data | ForEach-Object{$itemData.Add($_)} $page++ } while($page -le $response.metadata.page_count) } $finished = $true } catch [System.Net.WebException] { if($_.Exception.Response.StatusCode -eq 429) { $retryDelay = [int] ($_.Exception.Response.Headers["x-ratelimit-reset"]) Write-Verbose "Rate limit exceeded [$($_.Exception.Response.Headers["x-ratelimit-limit"])], retrying in [$retryDelay] seconds" Start-Sleep -Seconds $retryDelay } else { $errorResponse = $_.Exception.Response.GetResponseStream() | Get-StatusCakeHelperAPIErrorResponse Write-Error "A web exception was caught: [$($_.Exception.Message)] / [$($errorResponse.Message)] / [$($errorResponse.Errors -join ",")]" throw $_ } } }while ($finished -ne $true) $requestParams = @{} Return $itemData } <# .SYNOPSIS Gets the metadata for a StatusCake Pagespeed or Uptime test .DESCRIPTION Retrieves the metadata for a StatusCake item by type. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the item .PARAMETER Type Type of item to retrieve .PARAMETER Property Type of metadata to retrieve .PARAMETER Parameter Hashtable of parameters to be used for the request .PARAMETER PageLimit The number of results to return per page .PARAMETER ResultLimit The maximum number of results to return .EXAMPLE C:\PS>Get-StatusCakeHelperItemMetadata -Type "PageSpeed" -Property History -Name "Pagespeed Test" Retrieve pagespeed test history for test with name PageSpeed Test .EXAMPLE C:\PS>Get-StatusCakeHelperItemMetadata -Type "Uptime" -Property Alerts -Name "Example Uptime Speed Test" Retrieve details of alerts sent for a Uptime test called "Example Page Speed Test" #> function Get-StatusCakeHelperItemMetadata { [CmdletBinding(PositionalBinding=$false,DefaultParameterSetName='All')] [OutputType([System.Collections.Generic.List[PSObject]])] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(Mandatory=$true)] [ValidateSet("PageSpeed","Uptime")] [string]$Type, [Parameter(Mandatory=$true)] [ValidateSet("History","Periods","Alerts")] [string]$Property, [ValidateNotNullOrEmpty()] [hashtable]$Parameter, [ValidateRange(1,100)] [int]$PageLimit=25, [ValidateNotNullOrEmpty()] [int]$ResultLimit ) $requestParams = @{ uri = "https://api.statuscake.com/v1/$($Type.ToLower())/$ID/$($Property.ToLower())" Headers = @{"Authorization"="Bearer $($APICredential.GetNetworkCredential().password)"} Method = "Get" UseBasicParsing = $true } #If the maximum of results requested is less than the API limit change the page limit to match the maximum number of results requested if($ResultLimit -gt 0 -and $ResultLimit -le 100) { $PageLimit = $ResultLimit } If($Parameter) { $Parameter.Add("limit",$PageLimit) } else { $Parameter = @{"limit" = $PageLimit} } $requestParams["Body"] = $Parameter $results = 0 $itemData = [System.Collections.Generic.List[PSObject]]::new() do { try{ do{ $response = Invoke-RestMethod @requestParams foreach($item in $response.data) { $itemData.Add($item) } $requestParams.Remove("Body") $requestParams["uri"] = $response.links.next $results += ($response.data).Count #If the number of results exceeds the requested amount exit out of the loop if($ResultLimit) { if($results -ge $ResultLimit) { break } elseif(($ResultLimit - $results) -le 100) { #If the number of remaining results to retrieve is less than the API limit adjust the limit accordingly to retrieve the requested number $requestParams["Body"] = @{"limit" = ($ResultLimit - $results) } } } }while($response.links.next) $finished = $true } catch [System.Net.WebException] { if($_.Exception.Response.StatusCode -eq 429) { $retryDelay = [int] ($_.Exception.Response.Headers["x-ratelimit-reset"]) Write-Verbose "Rate limit exceeded [$($_.Exception.Response.Headers["x-ratelimit-limit"])], retrying in [$retryDelay] seconds" Start-Sleep -Seconds $retryDelay } else { $errorResponse = $_.Exception.Response.GetResponseStream() | Get-StatusCakeHelperAPIErrorResponse Write-Error "A web exception was caught: [$($_.Exception.Message)] / [$($errorResponse.Message)] / [$($errorResponse.Errors -join ",")]" throw $_ } } }while ($finished -ne $true) Return $itemData } <# .SYNOPSIS Creates a StatusCake Contact Group, Maintenance Window, PageSpeed, SSL or Uptime item .DESCRIPTION Creates a StatusCake Contact Group, Maintenance Window, PageSpeed, SSL or Uptime item and returns the ID. Use the passthru switch to return the details of the test created. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Type Type of item to create .PARAMETER Parameter Hashtable of parameters to create the item. The keys and values in the hashtable should match the parameters expected by the StatusCake API .PARAMETER PassThru Return the details of the object created. By default only the ID is returned. .EXAMPLE C:\PS>New-StatusCakeHelperItem -Type "pagespeed" -Parameter @{"name"="Example Page Speed Test"; "website_url"="https://www.example.com"; "check_rate"=86400; "region"="US"} Create a pagespeed test called "Example Page Speed Test" to check https://www.example.com every day from the US region .EXAMPLE C:\PS>New-StatusCakeHelperItem -Type "ssl" -Parameter @{"website_url"="https://www.example.com"; "check_rate"=86400} Create a ssl test to check https://www.example.com every day .EXAMPLE C:\PS>New-StatusCakeHelperItem -Type "uptime" -Parameter @{"name"="Example Uptime Speed Test";"test_type"="HTTP" "website_url"="https://www.example.com"; "check_rate"=86400} Create a uptime test called "Example Uptime Speed Test" to perform a HTTP check to test https://www.example.com every day .EXAMPLE C:\PS>New-StatusCakeHelperItem -Type "contact-groups" -Parameter @{"name"="Example Contact Group"} Create a contact group called "Example Contact Group" .EXAMPLE C:\PS>New-StatusCakeHelperItem -Type "maintenance-window" -Parameter @{"name"="Example Contact Group";"start_at"="2022-01-01T00:30:00Z";"end_at"="2022-01-01T01:30:00Z";"timezone"="UTC"} Create a maintenance window called "Example Maintenance Window" starting at 1st January 2022 00:30 UTC until 1st January 2022 01:30 UTC #> function New-StatusCakeHelperItem { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(Mandatory=$true)] [ValidateSet("Contact-Groups","Heartbeat","Maintenance-Windows","PageSpeed","SSL","Uptime")] [string]$Type, [hashtable]$Parameter, [switch]$PassThru ) $requestParams = @{ uri = "https://api.statuscake.com/v1/$($Type.ToLower())" Headers = @{"Authorization"="Bearer $($APICredential.GetNetworkCredential().password)"} UseBasicParsing = $true Method = "Post" ContentType = "application/x-www-form-urlencoded" Body = $Parameter | ConvertTo-StatusCakeHelperXW3FormUrlEncoded } if( $pscmdlet.ShouldProcess("$($requestParams["uri"])", "$($requestParams["Method"]) request to") ) { do{ try{ $id = (Invoke-RestMethod @requestParams).data.new_id $finished = $true } catch [System.Net.WebException] { if($_.Exception.Response.StatusCode -eq 429) { $retryDelay = [int] ($_.Exception.Response.Headers["x-ratelimit-reset"]) Write-Verbose "Rate limit exceeded [$($_.Exception.Response.Headers["x-ratelimit-limit"])], retrying in [$retryDelay] seconds" Start-Sleep -Seconds $retryDelay } else { $errorResponse = $_.Exception.Response.GetResponseStream() | Get-StatusCakeHelperAPIErrorResponse Write-Error "A web exception was caught: [$($_.Exception.Message)] / [$($errorResponse.Message)] / [$($errorResponse.Errors -join ",")]" throw $_ } } }while ($finished -ne $true) $requestParams = @{} if($PassThru) { Return Get-StatusCakeHelperItem -ID $id -Type $Type -APICredential $APICredential } else { Return $id } } } <# .SYNOPSIS Remove a StatusCake Contact Group, Maintenance Window, PageSpeed, SSL or Uptime item .DESCRIPTION Remove a StatusCake Contact Group, Maintenance Window, PageSpeed, SSL or Uptime item .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the test .PARAMETER Type Type of test to remove .EXAMPLE C:\PS>Remove-StatusCakeHelperItem -Type "PageSpeed" -Name "Example Page Speed Test" Remove a pagespeed test with name "Example Page Speed Test" .EXAMPLE C:\PS>Remove-StatusCakeHelperItem -Type "SSL" -ID 1234 Remove a ssl speed test with ID 1234 #> function Remove-StatusCakeHelperItem { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(Mandatory=$true)] [ValidateSet("Contact-Groups","Heartbeat","Maintenance-Windows","PageSpeed","SSL","Uptime")] [string]$Type ) $requestParams = @{ uri = "https://api.statuscake.com/v1/$($Type.ToLower())/$ID" Headers = @{"Authorization"="Bearer $($APICredential.GetNetworkCredential().password)"} UseBasicParsing = $true method = "Delete" } if( $pscmdlet.ShouldProcess("$($requestParams["uri"])", "$($requestParams["Method"]) request to") ) { do{ try{ Invoke-RestMethod @requestParams $finished = $true } catch [System.Net.WebException] { if($_.Exception.Response.StatusCode -eq 429) { $retryDelay = [int] ($_.Exception.Response.Headers["x-ratelimit-reset"]) Write-Verbose "Rate limit exceeded [$($_.Exception.Response.Headers["x-ratelimit-limit"])], retrying in [$retryDelay] seconds" Start-Sleep -Seconds $retryDelay } else { $errorResponse = $_.Exception.Response.GetResponseStream() | Get-StatusCakeHelperAPIErrorResponse Write-Error "A web exception was caught: [$($_.Exception.Message)] / [$($errorResponse.Message)] / [$($errorResponse.Errors -join ",")]" throw $_ } } }while ($finished -ne $true) $requestParams = @{} } } <# .SYNOPSIS Update a StatusCake item .DESCRIPTION Update a StatusCake Contact Group, Maintenance Window, PageSpeed, SSL or Uptime item .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the test .PARAMETER Type Type of test to remove .PARAMETER Parameter Hashtable of parameters to use to update the StatusCake item .EXAMPLE C:\PS>Update-StatusCakeHelperItem -Type "PageSpeed" -ID 12345 -Parameter @{"check_rate"="3600"} Update a pagespeed test called "Example Page Speed Test" to check every hour .EXAMPLE C:\PS>Update-StatusCakeHelperItem -Type "SSL" -ID 12345 -Parameter @{"check_rate"=86400} Update a ssl test to check the SSL certificate of https://www.example.com every day .EXAMPLE C:\PS>Update-StatusCakeHelperItem -Type "Uptime" ID 12345 -Parameter @{"name"="New Example Uptime Speed Test"} Update a uptime test called "Example Uptime Speed Test" and change it's name to "New Example Uptime Speed Test" .EXAMPLE C:\PS>Update-StatusCakeHelperItem -Type "Contact-Groups" ID 12345 -Parameter @{"email_addresses"="postmaster@example.com"} Update a contact group called "Example Contact Group" to use the email address postmaster@example.com .EXAMPLE C:\PS>Update-StatusCakeHelperItem -Type "Maintenance-Window" -ID 12345 -Parameter @{"repeat_interval"=2w} Update a maintenance window with ID 12345 to have a repeat interval of every 2 weeks #> function Update-StatusCakeHelperItem { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(Mandatory=$true)] [ValidateSet("Contact-Groups","Heartbeat","Maintenance-Windows","PageSpeed","SSL","Uptime")] [string]$Type, [hashtable]$Parameter ) $requestParams = @{ uri = "https://api.statuscake.com/v1/$($Type.ToLower())/$ID" Headers = @{"Authorization"="Bearer $($APICredential.GetNetworkCredential().password)"} UseBasicParsing = $true Method = "Put" ContentType = "application/x-www-form-urlencoded" Body = $Parameter | ConvertTo-StatusCakeHelperXW3FormUrlEncoded } if( $pscmdlet.ShouldProcess("$($requestParams["uri"])", "$($requestParams["Method"]) request to") ) { do{ try{ Invoke-RestMethod @requestParams $finished = $true } catch [System.Net.WebException] { if($_.Exception.Response.StatusCode -eq 429) { $retryDelay = [int] ($_.Exception.Response.Headers["x-ratelimit-reset"]) Write-Verbose "Rate limit exceeded [$($_.Exception.Response.Headers["x-ratelimit-limit"])], retrying in [$retryDelay] seconds" Start-Sleep -Seconds $retryDelay } else { $errorResponse = $_.Exception.Response.GetResponseStream() | Get-StatusCakeHelperAPIErrorResponse Write-Error "A web exception was caught: [$($_.Exception.Message)] / [$($errorResponse.Message)] / [$($errorResponse.Errors -join ",")]" throw $_ } } }while ($finished -ne $true) $requestParams = @{} } } <# .SYNOPSIS Clears a property of a StatusCake contact group .DESCRIPTION Clears the property of a StatusCake contact group using the supplied parameters. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the contact group to clear the property on .PARAMETER Name Name of the Contact Group on which to clear the property .PARAMETER Email Flag to clear all email addresses from contact group .PARAMETER PingURL Flag to clear ping URL from contact group .PARAMETER Mobile Flag to clear all mobile numbers from contact group .PARAMETER Integration Flag to clear all integration IDs from contact group .EXAMPLE C:\PS>Clear-StatusCakeHelperContactGroup -Name "Example" -email Set the contact group name "Example" with email address "test@example.com" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/ContactGroups/Clear-StatusCakeHelperContactGroup.md #> function Clear-StatusCakeHelperContactGroup { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='ByID')] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName='ByName')] [ValidateNotNullOrEmpty()] [string]$Name, [Alias("email_addresses")] [switch]$Email, [switch]$PingURL, [Alias("mobile_numbers")] [switch]$Mobile, [Alias("integrations")] [switch]$Integration ) if($ByName -and $Name) { if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake ContactGroups")) { $contactGroupCheck = Get-StatusCakeHelperContactGroup -APICredential $APICredential -Name $Name if(!$contactGroupCheck) { Write-Error "Unable to find Contact Group with specified name [$Name]" Return $null } elseif($contactGroupCheck.GetType().Name -eq 'Object[]') { Write-Error "Multiple Contact Groups with the same name [$Name]" Return $null } $ContactID = $contactGroupCheck.ID } } $exclude=@("ByName") $clear = @() foreach($parameter in $PSBoundParameters.GetEnumerator()) { $variableValue = Get-Variable -Name $parameter.Key -ValueOnly if($variableValue.GetType().Name-eq "SwitchParameter" -and $variableValue -eq $true) { $clear += $parameter.Key } } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude $exclude -Clear $clear $statusCakeAPIParams = $statusCakeAPIParams | ConvertTo-StatusCakeHelperAPIParameter $requestParams = @{ uri = "https://api.statuscake.com/v1/contact-groups/$ContactID" Headers = @{"Authorization"="Bearer $($APICredential.GetNetworkCredential().password)"} UseBasicParsing = $true method = "Put" ContentType = "application/x-www-form-urlencoded" body = $statusCakeAPIParams } if( $pscmdlet.ShouldProcess("StatusCake API", "Update StatusCake ContactGroup") ) { try{ Invoke-RestMethod @requestParams } catch [System.Net.WebException] { Write-Verbose "A web exception was caught: [$($_.Exception.Message)] / [$($_.Exception.Response.StatusCode)] / [$($_.Exception.Response.StatusDescription)]" } } } <# .SYNOPSIS Copies the settings of a StatusCake ContactGroup .DESCRIPTION Creates a copy of a contact group which can be specified by name or id. The new name of the contact group must not already exist for the command to be successful. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name Name of the Contact Group to be copied .PARAMETER ID ID of the Contact Group to be copied .PARAMETER NewName Name of the copy of the Contact Group .EXAMPLE C:\PS> Copy-StatusCakeHelperContactGroup -Name "Example" -NewName "Example - Copy" Create a copy of a contact group called "Example" with name "Example - Copy" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/ContactGroups/Copy-StatusCakeHelperContactGroup.md #> function Copy-StatusCakeHelperContactGroup { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [Parameter(ParameterSetName='CopyByName')] [Parameter(ParameterSetName='CopyById')] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [int]$ID, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$NewName ) if($Name) { #If copying by name check if resource with that name exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Contact Groups")) { $statusCakeItem = Get-StatusCakeHelperContactGroup -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No Contact with Specified Name Exists [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple Contacts with the same name [$Name] [$($statusCakeItem.ID)]" Return $null } } } elseif($ID) { #If copying by ID verify that a resource with the Id already exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Contacts")) { $statusCakeItem = Get-StatusCakeHelperContactGroup -APICredential $APICredential -ID $ID if(!$statusCakeItem) { Write-Error "No Contact with Specified ID Exists [$ID]" Return $null } } } $psParams = @{} $psParams = $statusCakeItem | Get-StatusCakeHelperCopyParameter -FunctionName "New-StatusCakeHelperContactGroup" Write-Verbose "$($psParams.Keys -join ",")" $psParams.Name = $NewName if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake Contact Group")) { $result = New-StatusCakeHelperContactGroup -APICredential $APICredential @psParams } Return $result } <# .SYNOPSIS Retrieves a StatusCake Contact Group with a specific name or Test ID .DESCRIPTION Retrieves a StatusCake contact group via the name or ID. If no name or id supplied all contact groups will be returned. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name Name of the Contact Group .PARAMETER ID ID of the Contact Group to be retrieved .EXAMPLE C:\PS>Get-StatusCakeHelperContactGroup Retrieve all contact groups .EXAMPLE C:\PS>Get-StatusCakeHelperContactGroup -ID 123456 Retrieve contact group with ID 123456 .OUTPUTS Returns the contact group(s) id : 123456 name : Test Contact Group email_addresses : {test@example.com} mobile_numbers : {} integrations : {} .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/ContactGroups/Get-StatusCakeHelperContactGroup.md .LINK https://www.statuscake.com/api/v1/#tag/contact-groups/operation/list-contact-groups .LINK https://www.statuscake.com/api/v1/#tag/contact-groups/operation/get-contact-group #> function Get-StatusCakeHelperContactGroup { [CmdletBinding(PositionalBinding=$false,DefaultParameterSetName='all')] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "Group Name")] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(ParameterSetName = "Contact ID")] [Alias("GroupID","ContactID")] [ValidateNotNullOrEmpty()] [int]$ID ) if($Name) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Contact-Groups" | Where-Object{$_.name -eq $Name} } elseif($ID) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Contact-Groups" -ID $ID } else { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Contact-Groups" } Return $statusCakeItem } <# .SYNOPSIS Create a StatusCake ContactGroup .DESCRIPTION Creates a new StatusCake ContactGroup using the supplied parameters. The name of the contact group must be unique for the contact group to be created. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name Name of the Contact Group to be created .PARAMETER Email Array of email addresses to sent alerts to. .PARAMETER IntegrationID List of integration IDs to link with this contact group .PARAMETER PingURL URL or IP address of an endpoint to push uptime events. Currently this only supports HTTP GET endpoints .PARAMETER Mobile Array of mobile numbers in International Format E.164 notation .PARAMETER Force Force creation of the contact group even if a window with the same name already exists .PARAMETER Passthru Return the contact group details instead of the contact id .EXAMPLE C:\PS>New-StatusCakeHelperContactGroup -Name "Example" -email @(test@example.com) Create contact group called "Example" using email address "test@example.com" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/ContactGroups/New-StatusCakeHelperContactGroup.md .LINK https://www.statuscake.com/api/v1/#tag/contact-groups/operation/create-contact-group #> function New-StatusCakeHelperContactGroup { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Name, [ValidateScript({ if(!($_ | Test-StatusCakeHelperEmailAddress)){ Throw "Invalid email address format supplied [$_]" } else{$true} })] [Alias("email_addresses")] [string[]]$Email, [Alias("integrations")] [int[]]$IntegrationID, [ValidatePattern('^((http|https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias("ping_url")] [string]$PingURL, [ValidateScript({ if(!($_ | Test-StatusCakeHelperMobileNumber)){ Throw "Mobile number is not in E.164 format [$_]" } else{$true} })] [Alias("mobile_numbers")] [string[]]$Mobile, [switch]$Force, [switch]$PassThru ) #If force flag not set then check if an existing test with the same name already exists if(!$Force) { $statusCakeItem = Get-StatusCakeHelperContactGroup -APICredential $APICredential -Name $Name if($statusCakeItem) { Write-Error "Existing contact group(s) found with name [$Name]. Please use a different name or use the -Force argument" Return $null } } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","PassThru") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake contact group") ) { Return (New-StatusCakeHelperItem -APICredential $APICredential -Type Contact-Groups -Parameter $statusCakeAPIParams -PassThru:$PassThru) } } <# .SYNOPSIS Removes the specified StatusCake contact group .DESCRIPTION Removes the StatusCake contact group via its ID or Name. .PARAMETER APICredential Username and APIKey Credentials to access StatusCake API .PARAMETER ID ID of the contact group to be removed .PARAMETER Name Name of the Contact Group to be removed .EXAMPLE C:\PS>Remove-StatusCakeHelperContactGroup -ID 123456 Remove contact group with ID 123456 .OUTPUTS Returns the result of the contact group removal as an object .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/ContactGroups/Remove-StatusCakeHelperContactGroup.md .LINK https://www.statuscake.com/api/v1/#tag/contact-groups/operation/delete-contact-group #> function Remove-StatusCakeHelperContactGroup { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ContactID")] [ValidateNotNullOrEmpty()] [Alias("group_id","GroupID","ContactID")] [int]$ID, [Parameter(ParameterSetName = "GroupName")] [ValidateNotNullOrEmpty()] [string]$Name ) if($Name) { $statusCakeItem = Get-StatusCakeHelperContactGroup -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No contact group(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple contact group found with name [$Name]. Please delete the contact group by ID" Return $null } $ID = $statusCakeItem.id } if( $pscmdlet.ShouldProcess("$ID", "Delete StatusCake contact group") ) { Return (Remove-StatusCakeHelperItem -APICredential $APICredential -Type Contact-Groups -ID $ID) } } <# .SYNOPSIS Updates the configuration of a StatusCake ContactGroup .DESCRIPTION Updates a StatusCake ContactGroup using the supplied parameters. Values supplied overwrite existing values. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name Name of the Contact Group to be created .PARAMETER ID ID of the contact group to set .PARAMETER Email Array of email addresses to sent alerts to. .PARAMETER PingURL URL To Send a POST alert .PARAMETER Mobile Array of mobile number in International Format E.164 notation .PARAMETER IntegrationID List of integration IDs to link with this contact group .EXAMPLE C:\PS>Update-StatusCakeHelperContactGroup -Name "Example" -email @(test@example.com) Set the contact group name "Example" with email address "test@example.com" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/ContactGroups/Update-StatusCakeHelperContactGroup.md .LINK https://www.statuscake.com/api/v1/#tag/contact-groups/operation/update-contact-group #> function Update-StatusCakeHelperContactGroup { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [Alias("group_id","GroupID","ContactID")] [int]$ID, [Parameter(ParameterSetName = "Name")] [ValidateNotNullOrEmpty()] [Alias("GroupName")] [string]$Name, [ValidateScript({ if(!($_ | Test-StatusCakeHelperEmailAddress)){ Throw "Invalid email address format supplied [$_]" } else{$true} })] [Alias("email_addresses")] [string[]]$Email, [Alias("integrations")] [int[]]$IntegrationID, [ValidatePattern('^((http|https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias("ping_url")] [string]$PingURL, [ValidateScript({ if(!($_ | Test-StatusCakeHelperMobileNumber)){ Throw "Mobile number is not in E.164 format [$_]" } else{$true} })] [Alias("mobile_numbers")] [string[]]$Mobile ) if($Name) { $statusCakeItem = Get-StatusCakeHelperContactGroup -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No contact group(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple contact groups found with name [$Name]. Please update the contact group by ID" Return $null } $ID = $statusCakeItem.id } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","Name") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("$ID", "Update StatusCake contact group") ) { Return (Update-StatusCakeHelperItem -APICredential $APICredential -Type "Contact-Groups" -ID $ID -Parameter $statusCakeAPIParams) } } <# .SYNOPSIS Copies the settings of a StatusCake test .DESCRIPTION Creates a copy of a test. Supply the Paused parameter to override the original values in the source test. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID The Heartbeat test ID to modify the details for .PARAMETER Name Name of the heartbeat Test .PARAMETER NewName Name of the new copied heartbeat test .PARAMETER Paused If supplied sets the state of the test should be after it is copied. .EXAMPLE C:\PS>Copy-StatusCakeHelperHeartbeatTest -Name "Example" -NewName "Example - Copy" Create a copy of test "Example" with name "Example - Copy" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Heartbeat/Copy-StatusCakeHelperHeartbeatTest.md #> function Copy-StatusCakeHelperHeartbeatTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [Parameter(ParameterSetName='CopyByName')] [Parameter(ParameterSetName='CopyById')] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [int]$ID, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [ValidateNotNullOrEmpty()] [String]$Name, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [ValidateNotNullOrEmpty()] [String]$NewName, [Parameter(ParameterSetName='CopyByName')] [Parameter(ParameterSetName='CopyById')] [Boolean]$Paused ) if($Name) { #If copying by name check if resource with that name exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Tests")) { $statusCakeItem = Get-StatusCakeHelperHeartbeatTest -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No Heartbeat test with Specified Name Exists [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple Heartbeat tests with the same name [$Name] [$($statusCakeItem.ID)]" Return $null } $ID = $statusCakeItem.ID } } elseif($ID) { #If copying by ID verify that a resource with the Id already exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Tests")) { $statusCakeItem = Get-StatusCakeHelperHeartbeatTest -APICredential $APICredential -ID $ID if(!$statusCakeItem) { Write-Error "No Test with Specified ID Exists [$ID]" Return $null } $ID = $statusCakeItem.ID } } $psParams = @{} $psParams = $statusCakeItem | Get-StatusCakeHelperCopyParameter -FunctionName "New-StatusCakeHelperHeartbeatTest" Write-Verbose "$($psParams.Keys -join ",")" $psParams.Name = $NewName if($Paused) { $psParams.Paused = $Paused } if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake Heartbeat Test")) { $result = New-StatusCakeHelperHeartbeatTest -APICredential $APICredential @psParams } Return $result } <# .SYNOPSIS Retrieves a StatusCake Heartbeat Test with a specific name or Test ID .DESCRIPTION Retrieves StatusCake Heartbeat Test via the test name of the test or Test ID .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID Test ID to retrieve .PARAMETER Name Name of the test to retrieve .PARAMETER Status Filter tests to a specific status .PARAMETER Tag Match tests with tags .PARAMETER MatchAny Match tests which have any of the supplied tags (true) or all of the supplied tags (false). Default is false. .PARAMETER NoUptime Do not calculate uptime percentages for results. Default is false. .PARAMETER Status The status of the heartbeat tests to be returned .EXAMPLE C:\PS>Get-StatusCakeHelperHeartbeatTest Retrieve all tests .EXAMPLE C:\PS>Get-StatusCakeHelperHeartbeatTest -ID 123456 Retrieve the test with ID 123456 .OUTPUTS Returns the test which exists returning $null if no matching test .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Heartbeat/Get-StatusCakeHelperHeartbeatTest.md .LINK https://www.statuscake.com/api/v1/#tag/heartbeat/operation/list-heartbeat-tests .LINK https://www.statuscake.com/api/v1/#tag/heartbeat/operation/get-heartbeat-test #> function Get-StatusCakeHelperHeartbeatTest { [CmdletBinding(PositionalBinding=$false,DefaultParameterSetName='MatchTag')] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ByTestID")] [Parameter(ParameterSetName='MatchTag')] [Parameter(ParameterSetName='MatchAnyTag')] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "ByTestName")] [Parameter(ParameterSetName='MatchTag')] [Parameter(ParameterSetName='MatchAnyTag')] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(Mandatory=$false,ParameterSetName='MatchTag')] [Parameter(Mandatory=$true,ParameterSetName='MatchAnyTag')] [Alias('tags')] [string[]]$Tag, [Parameter(Mandatory=$false,ParameterSetName='MatchTag')] [Parameter(Mandatory=$false,ParameterSetName='MatchAnyTag')] [switch]$NoUptime, [Parameter(Mandatory=$false,ParameterSetName='MatchAnyTag')] [switch]$MatchAny, [Parameter(Mandatory=$false,ParameterSetName='MatchTag')] [Parameter(Mandatory=$false,ParameterSetName='MatchAnyTag')] [ValidateSet("down","up")] [string]$Status ) if($Name) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Heartbeat" | Where-Object{$_.name -eq $Name} if($statusCakeItem) { #Ensure output when retrieving the name is the same as the ID $statusCakeItem = $statusCakeItem.id | ForEach-Object{Get-StatusCakeHelperItem -APICredential $APICredential -Type "Heartbeat" -ID $_} } } elseif($ID) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Heartbeat" -ID $ID } else { $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","Limit") if($statusCakeAPIParams.Count -ge 1) { $statusCakeAPIParams = $statusCakeAPIParams | ConvertTo-StatusCakeHelperAPIValue -CsvString "tags" $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Heartbeat" -Parameter $statusCakeAPIParams } else { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Heartbeat" } } Return $statusCakeItem } <# .SYNOPSIS Create a StatusCake Heartbeat Test .DESCRIPTION Creates a new StatusCake Heartbeat Test using the supplied parameters. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name Name of the check .PARAMETER Period Number of seconds since last ping before the check is considered down .PARAMETER ContactID Array containing contact IDs to alert. .PARAMETER HostingProvider Name of the hosting provider .PARAMETER Paused Whether the check should be run. .PARAMETER Tags Array of tags to apply to the test .PARAMETER Force Create an Heartbeat test even if one with the same name already exists .PARAMETER Passthru Return the Heartbeat test details instead of the Heartbeat test id .EXAMPLE C:\PS>New-StatusCakeHelperHeartbeatTest -Name "Example Heartbeat test" Create a new Heartbeat check called "Example Heartbeat test" .EXAMPLE C:\PS>New-StatusCakeHelperHeartbeatTest -Name "Example Heartbeat test" -Period 30 Create a new Heartbeat check called "Example Heartbeat test" to be considered down if a ping is not received every 30 seconds .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Heartbeat/New-StatusCakeHelperHeartbeatTest.md .LINK https://www.statuscake.com/api/v1/#tag/heartbeat/operation/create-heartbeat-test #> function New-StatusCakeHelperHeartbeatTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Name, [ValidateRange(30,172800)] [int]$Period=1800, [Alias('contact_groups')] [int[]]$ContactID, [Alias('host')] [string]$HostingProvider, [boolean]$Paused, [string[]]$Tags, [switch]$Force, [switch]$PassThru ) #If force flag not set then check if an existing test with the same name already exists if(!$Force) { $statusCakeItem = Get-StatusCakeHelperHeartbeatTest -APICredential $APICredential -Name $Name if($statusCakeItem) { Write-Error "Existing heartbeat test(s) found with name [$Name]. Please use a different name for the check or use the -Force argument" Return $null } } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","PassThru") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake Heartbeat Check") ) { Return (New-StatusCakeHelperItem -APICredential $APICredential -Type Heartbeat -Parameter $statusCakeAPIParams -PassThru:$PassThru) } } <# .SYNOPSIS Removes the specified StatusCake Test .DESCRIPTION Removes the StatusCake test via it's Test ID or name .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Test to be removed from StatusCake .PARAMETER Name Name of the Test to be removed from StatusCake .EXAMPLE C:\PS>Remove-StatusCakeHelperHeartbeatTest -ID 123456 Delete the StatusCake test with ID 123456 .OUTPUTS Returns the result of the test removal as an object .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Heartbeat/Remove-StatusCakeHelperHeartbeatTest.md .LINK https://www.statuscake.com/api/v1/#tag/heartbeat/operation/delete-heartbeat-test #> function Remove-StatusCakeHelperHeartbeatTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "Name")] [ValidateNotNullOrEmpty()] [string]$Name ) if($Name) { $statusCakeItem = Get-StatusCakeHelperHeartbeatTest -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No heartbeat test(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple heartbeat tests found with name [$Name]. Please delete the heartbeat test by ID" Return $null } $ID = $statusCakeItem.id } if( $pscmdlet.ShouldProcess("$ID", "Delete StatusCake Heartbeat Test") ) { Return (Remove-StatusCakeHelperItem -APICredential $APICredential -Type Heartbeat -ID $ID) } } <# .SYNOPSIS Updates a StatusCake Heartbeat Test .DESCRIPTION Updates a new StatusCake Heartbeat Test using the supplied parameters. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Test to be updated in StatusCake .PARAMETER Name Name of the check .PARAMETER Period Number of seconds since last ping before the check is considered down .PARAMETER ContactID Array containing contact IDs to alert. .PARAMETER HostingProvider Name of the hosting provider .PARAMETER Paused Whether the check should be run. .PARAMETER Tags Array of tags .PARAMETER Force Update an Heartbeat test even if one with the same name already exists .PARAMETER Passthru Return the Heartbeat test details instead of the Heartbeat test id .EXAMPLE C:\PS>Update-StatusCakeHelperHeartbeatTest -Name "Example Heartbeat test" Update a Heartbeat check called "Example Heartbeat test" .EXAMPLE C:\PS>Update-StatusCakeHelperHeartbeatTest -Name "Example Heartbeat test" -Period 30 Update a Heartbeat check called "Example Heartbeat test" to be considered down if a ping is not received every 30 seconds .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Heartbeat/Update-StatusCakeHelperHeartbeatTest.md .LINK https://www.statuscake.com/api/v1/#tag/heartbeat/operation/update-heartbeat-test #> function Update-StatusCakeHelperHeartbeatTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "Name")] [ValidateNotNullOrEmpty()] [string]$Name, [ValidateRange(30,172800)] [int]$Period=1800, [Alias('contact_groups')] [int[]]$ContactID, [Alias('host')] [string]$HostingProvider, [boolean]$Paused, [string[]]$Tags, [switch]$Force, [switch]$PassThru ) if($Name) { $statusCakeItem = Get-StatusCakeHelperHeartbeatTest -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No Heartbeat test(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple Heartbeat Tests found with name [$Name]. Please update the Heartbeat test by ID" Return $null } $ID = $statusCakeItem.id } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","Name") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("$ID", "Update StatusCake Heartbeat Test") ) { Return (Update-StatusCakeHelperItem -APICredential $APICredential -Type Heartbeat -ID $ID -Parameter $statusCakeAPIParams) } } <# .SYNOPSIS Retrieve the details of the StatusCake locations from StatusCake .DESCRIPTION Retrieves details of StatusCake locations from StatusCake .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER RegionCode The StatusCake region code to return locations for. All locations returned if no region code supplied. .PARAMETER Type The type of test to retrieve locations for. Options are Uptime or Pagespeed. Default is Uptime .PARAMETER Best Return only locations with the least number of tests. Default is false. .EXAMPLE C:\PS>Get-StatusCakeHelperLocation -Type Uptime-Locations Retrieve all StatusCake uptime locations .EXAMPLE C:\PS>Get-StatusCakeHelperLocation -Type Uptime-Locations -Location GBR -Best Retrieve all StatusCake uptime locations in Great Britian with the least number of checks .EXAMPLE C:\PS>Get-StatusCakeHelperLocation -Type PageSpeed-Locations Retrieve all StatusCake pagespeed locations .OUTPUTS StatusCakeLocations - Object containing details of StatusCake Locations description : Australia, Sydney - 1 region : Australia / Sydney region_code : sydney status : up ipv4 : 45.76.123.211 .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Locations/Get-StatusCakeHelperLocation.md .LINK https://www.statuscake.com/api/v1/#tag/locations #> function Get-StatusCakeHelperLocation { [CmdletBinding(PositionalBinding=$false,DefaultParameterSetName='All')] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [ValidateNotNullOrEmpty()] [Alias("region_code")] [string]$RegionCode, [ValidateSet("Uptime-Locations","PageSpeed-Locations")] [string]$Type="Uptime-Locations", [ValidateNotNullOrEmpty()] [bool]$Best ) $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Type") $statusCakeAPIParams = $statusCakeAPIParams | ConvertTo-StatusCakeHelperAPIValue $requestParams = @{ uri = "https://api.statuscake.com/v1/$($Type.ToLower())" Headers = @{"Authorization"="Bearer $($APICredential.GetNetworkCredential().password)"} UseBasicParsing = $true Method = "Get" Body = $statusCakeAPIParams } do{ try { $locationList = Invoke-RestMethod @requestParams $finished = $true } catch [System.Net.WebException] { if($_.Exception.Response.StatusCode -eq 429) { $retryDelay = [int] ($_.Exception.Response.Headers["x-ratelimit-reset"]) Write-Verbose "Rate limit exceeded [$($_.Exception.Response.Headers["x-ratelimit-limit"])], retrying in [$retryDelay] seconds" Start-Sleep -Seconds $retryDelay } else { $errorResponse = $_.Exception.Response.GetResponseStream() | Get-StatusCakeHelperAPIErrorResponse Write-Error "A web exception was caught: [$($_.Exception.Message)] / [$($errorResponse.Message)] / [$($errorResponse.Errors -join ",")]" throw $_ } } }while ($finished -ne $true) Return $locationList.data } <# .SYNOPSIS Clears the tests associated with a StatusCake Maintenance Window .DESCRIPTION Clears the tests and/or tags associated with a pending StatusCake Maintenance Window. You can only clear the test IDs/tags for a window which is in a pending state. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name Name of the maintenance window to clear the tests from .PARAMETER ID The maintenance window ID .PARAMETER UptimeID Flag to clear all tests included in a maintenance window .PARAMETER UptimeTag Flag to clear all tags of the tests to be included in a maintenance window .EXAMPLE C:\PS>Clear-StatusCakeHelperMaintenanceWindow -ID 123456 -TestIDs Clear all test IDs associated with maintenance window 123456 .EXAMPLE C:\PS>Clear-StatusCakeHelperMaintenanceWindow -ID 123456 -TestTags Clear all test tags associated with maintenance window 123456 #> function Clear-StatusCakeHelperMaintenanceWindow { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='ByID',Mandatory=$true)] [Parameter(ParameterSetName='TestIDs',Mandatory=$true)] [Parameter(ParameterSetName='TestTags',Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$ID, [Parameter(ParameterSetName='ByName',Mandatory=$true)] [Parameter(ParameterSetName='TestIDs',Mandatory=$true)] [Parameter(ParameterSetName='TestTags',Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(ParameterSetName='TestIDs',Mandatory=$true)] [Parameter(ParameterSetName='ByID')] [Parameter(ParameterSetName='ByName')] [Alias('tests','raw_tests','TestIDs')] [switch]$UptimeID, [Parameter(ParameterSetName='TestTags',Mandatory=$true)] [Parameter(ParameterSetName='ByID')] [Parameter(ParameterSetName='ByName')] [Alias('tags','raw_tags','TestTags')] [switch]$UptimeTag ) if($Name) { $statusCakeItem = Get-StatusCakeHelperMaintenanceWindow -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No maintenance window(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple maintenance windows found with name [$Name]. Please update the maintenance window by ID" Return $null } $ID = $statusCakeItem.id } if($UptimeID) { $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Name","ID") -Clear "UptimeID" } elseif($UptimeTag) { $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Name","ID") -Clear "UptimeTag" } Write-Verbose "[$($allParameterValues.keys)] [$($allParameterValues.values)]" Write-Verbose "[$($statusCakeAPIParams.keys)] [$($statusCakeAPIParams.values)]" if( $pscmdlet.ShouldProcess("StatusCake API", "Clear Value From StatusCake Test")) { Return (Update-StatusCakeHelperItem -APICredential $APICredential -Type Maintenance-Windows -ID $ID -Parameter $statusCakeAPIParams) } } <# .SYNOPSIS Gets a StatusCake Maintenance Window .DESCRIPTION Retrieves StatusCake Maintenance Windows. If no id or name is supplied all maintenance windows are returned. Results can be filtered by maintenance window state. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name Name of the maintenance window to retrieve .PARAMETER ID ID of the maintenance window to retrieve .PARAMETER State Filter results based on state. Valid options are pending, active, and paused .EXAMPLE C:\PS>Get-StatusCakeHelperMaintenanceWindow Get all maintenance windows .EXAMPLE C:\PS>Get-StatusCakeHelperMaintenanceWindow -State pending Get all maintenance windows in a pending state .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/MaintenanceWindows/Get-StatusCakeHelperMaintenanceWindow.md .LINK https://www.statuscake.com/api/v1/#operation/list-maintenance-windows .LINK https://www.statuscake.com/api/v1/#operation/get-maintenance-window .OUTPUTS Returns StatusCake Maintenance Windows as an object #> function Get-StatusCakeHelperMaintenanceWindow { [CmdletBinding(PositionalBinding=$false,DefaultParameterSetName='all')] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "all")] [ValidateSet("active","paused","pending")] [string]$State, [Parameter(ParameterSetName = "Name")] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID ) if($State) { $parameter = $State | ConvertTo-StatusCakeHelperAPIValue $itemParameters["Parameter"] = $parameter $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Maintenance-Windows" -Parameter $parameter } elseif($Name) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Maintenance-Windows" | Where-Object{$_.name -eq $Name} } elseif($ID) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Maintenance-Windows" -ID $ID } else { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Maintenance-Windows" } Return $statusCakeItem } <# .SYNOPSIS Create a StatusCake Maintenance Window .DESCRIPTION Creates a new StatusCake Maintenance Window using the supplied parameters. Tests can be included in the maintenance window by either supplying the uptime test IDs or uptime test tags. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name A descriptive name for the maintenance window .PARAMETER StartDate Start date of the maintenance window. .PARAMETER EndDate End time of your window. Must be in the future .PARAMETER Timezone Must be a valid timezone, or UTC .PARAMETER UptimeID Array of uptime test IDs that should be included .PARAMETER UptimeTag Array of uptime test tags with these tags will be included .PARAMETER RepeatInterval How often this window should occur .PARAMETER Force Force creation of the maintenance window even if a window with the same name already exists .PARAMETER Passthru Return the maintenance window details instead of the maintenance window id .EXAMPLE C:\PS>New-StatusCakeHelperMaintenanceWindow -Name "Example Maintenance Window" -StartDate $(Get-Date) -EndDate $((Get-Date).AddHours(1)) -Timezone "Europe/London" -TestIDs @("123456") Create a maintenance window called "Example Maintenance Window" starting today and ending in one hour in the Europe/London timezone for test ID 123456 .EXAMPLE C:\PS>New-StatusCakeHelperMaintenanceWindow -Name "Example Maintenance Window" -StartDate $(Get-Date) -EndDate $((Get-Date).AddHours(1)) -Timezone "Europe/London" -TestTags @("Tag1","Tag2") Create a maintenance window called "Example Maintenance Window" starting today and ending in one hour in the Europe/London timezone including tests which have tags "Tag1" and "Tag2" .EXAMPLE C:\PS>New-StatusCakeHelperMaintenanceWindow -Name "Example Maintenance Window" -StartDate $(Get-Date) -EndDate $((Get-Date).AddHours(1)) -Timezone "Europe/London" -TestIDs @("123456") -RecurEvery 7 Create a maintenance window called "Example Maintenance Window" starting today and ending in one hour in the Europe/London timezone for test ID 123456 recurring every 7 day .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/MaintenanceWindows/New-StatusCakeHelperMaintenanceWindow.md .LINK https://www.statuscake.com/api/v1/#tag/maintenance-windows/operation/create-maintenance-window #> function New-StatusCakeHelperMaintenanceWindow { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(Mandatory=$true)] [Alias('start_at','start_date','start_unix')] [datetime]$StartDate, [Parameter(Mandatory=$true)] [Alias('end_at','end_date','end_unix')] [datetime]$EndDate, [Parameter(Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Timezone, [ValidateNotNullOrEmpty()] [Alias('tests','raw_tests','TestIDs')] [int[]]$UptimeID, [ValidateNotNullOrEmpty()] [Alias('tags','raw_tags','TestTags')] [string[]]$UptimeTag, [ValidateSet("never","1d","1w","2w","1m")] [Alias('repeat_interval')] [string]$RepeatInterval, [switch]$Force, [switch]$PassThru ) #If force flag not set then check if an existing item with the same name already exists if(!$Force) { $statusCakeItem = Get-StatusCakeHelperMaintenanceWindow -APICredential $APICredential -Name $Name if($statusCakeItem) { Write-Error "Existing maintenance window(s) found with name [$Name]. Please use a different name for the check or use the -Force argument" Return $null } } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","PassThru") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake Maintenance Window") ) { Return (New-StatusCakeHelperItem -APICredential $APICredential -Type Maintenance-Windows -Parameter $statusCakeAPIParams -PassThru:$PassThru) } } <# .SYNOPSIS Remove a StatusCake Maintenance Window .DESCRIPTION Deletes a StatusCake Maintenance Window using the supplied ID or name. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID The maintenance window ID .PARAMETER Name Name of the maintenance window to remove .EXAMPLE C:\PS>Remove-StatusCakeHelperMaintenanceWindow -ID 123456 Remove the maintenance window with id 123456 .EXAMPLE C:\PS>Remove-StatusCakeHelperMaintenanceWindow -ID 123456 -Name "Example Maintenance Window" Remove the maintenance window with name "Example Maintenance Window" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/MaintenanceWindows/Remove-StatusCakeHelperMaintenanceWindow.md .LINK https://www.statuscake.com/api/v1/#tag/maintenance-windows/operation/delete-maintenance-window #> function Remove-StatusCakeHelperMaintenanceWindow { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [int]$ID, [Parameter(ParameterSetName = "name")] [string]$Name ) if($Name) { $statusCakeItem = Get-StatusCakeHelperMaintenanceWindow -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No maintenance window(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple maintenance windows found with name [$Name]. Please delete the maintenance window by ID" Return $null } $ID = $statusCakeItem.id } if( $pscmdlet.ShouldProcess("$ID", "Remove StatusCake Maintenance Window") ) { Return (Remove-StatusCakeHelperItem -APICredential $APICredential -Type Maintenance-Windows -ID $ID) } } <# .SYNOPSIS Updates a StatusCake Maintenance Window .DESCRIPTION Updates the configuration of StatusCake Maintenance Window using the supplied parameters. You can only update a window which is in a pending state. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name A descriptive name for the maintenance window .PARAMETER ID The maintenance window ID .PARAMETER StartDate Start date of your window. Can be slightly in the past .PARAMETER EndDate End time of your window. Must be in the future .PARAMETER Timezone Must be a valid timezone, or UTC .PARAMETER UptimeID Array of uptime test IDs that should be included .PARAMETER UptimeTag Array of uptime test tags with these tags will be included .PARAMETER RepeatInterval How often in days this window should occur .EXAMPLE C:PS>Update-StatusCakeHelperMaintenanceWindow -ID 123456 -RepeatInterval 1m Modify the maintenance window with ID 123456 to recur every month .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/MaintenanceWindows/Update-StatusCakeHelperMaintenanceWindow.md .LINK https://www.statuscake.com/api/v1/#tag/maintenance-windows/operation/update-maintenance-window #> function Update-StatusCakeHelperMaintenanceWindow { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='ID')] [ValidateNotNullOrEmpty()] [string]$ID, [Parameter(ParameterSetName='Name')] [ValidateNotNullOrEmpty()] [string]$Name, [Alias('start_at','start_date','start_unix')] [datetime]$StartDate, [Alias('end_at','end_date','end_unix')] [datetime]$EndDate, [ValidateScript({$_ | Test-StatusCakeHelperTimeZone})] [string]$Timezone, [Alias('tests','raw_tests','TestIDs')] [int[]]$UptimeID, [Alias('tags','raw_tags','TestTags')] [string[]]$UptimeTag, [ValidateSet("never","1d","1w","2w","1m")] [Alias('repeat_interval')] [string]$RepeatInterval ) if($Name) { $statusCakeItem = Get-StatusCakeHelperMaintenanceWindow -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No maintenance window(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple maintenance windows found with name [$Name]. Please update the maintenance window by ID" Return $null } $ID = $statusCakeItem.id } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","Name","ID") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("$ID", "Update StatusCake Maintenance Window") ) { Return (Update-StatusCakeHelperItem -APICredential $APICredential -Type Maintenance-Windows -ID $ID -Parameter $statusCakeAPIParams) } } <# .SYNOPSIS Copies the settings of a StatusCake Page Speed Test .DESCRIPTION Creates a copy of a Page Speed Test. Supply a value for the WebsiteURL parameter to override the source URL. A region is required as StatusCake API does not return the region the tests are carried out from. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Page Speed Test to be copied .PARAMETER Name Name of the Page Speed Test to be copied .PARAMETER NewName Name of the Page Speed Test copy .PARAMETER WebsiteURL Name of the URL to be used in the copy of the test .PARAMETER Region StatusCake region the test should carried out from. .EXAMPLE C:\PS>Copy-StatusCakeHelperPageSpeedTest -Name "Example" -NewName "Example - Copy" -Region UK Creates a copy of a page speed test called "Example" with name "Example - Copy" .EXAMPLE C:\PS>Copy-StatusCakeHelperPageSpeedTest -Name "Example" -NewName "Example - Copy" -WebsiteURL "https://www.example.org" -Region UK Creates a copy of a page speed test called "Example" with name "Example - Copy" using the URL "https://www.example.org" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/PageSpeed/Copy-StatusCakeHelperPageSpeedTest.md #> function Copy-StatusCakeHelperPageSpeedTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [Parameter(ParameterSetName='CopyByName')] [Parameter(ParameterSetName='CopyById')] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [int]$ID, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$NewName, [Parameter(ParameterSetName='CopyByName')] [Parameter(ParameterSetName='CopyById')] [ValidatePattern('^((http|https):\/\/)?([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] [Alias('website_url')] [string]$WebsiteURL, [Parameter(Mandatory=$true)] [ValidateSet("AU","CA","DE","FR","IN","JP","NL","SG","UK","US","USW")] [string]$Region ) if($Name) { #If copying by name check if resource with that name exists if( $pscmdlet.ShouldProcess("$Name", "Retrieve StatusCake Page Speed Test Details")) { $statusCakeItem = Get-StatusCakeHelperPageSpeedTest -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No Page Speed Test with Specified Name Exists [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple Page Speed Tests with the same name [$Name] [$($statusCakeItem.ID)]" Return $null } } } elseif($ID) { #If copying by ID verify that a resource with the Id already exists if( $pscmdlet.ShouldProcess("$ID", "Retrieve StatusCake Page Speed Test Details")) { $statusCakeItem = Get-StatusCakeHelperPageSpeedTest -APICredential $APICredential -id $ID if(!$statusCakeItem) { Write-Error "No Page Speed Test with Specified ID Exists [$ID]" Return $null } } } $psParams = @{} $psParams = $statusCakeItem | Get-StatusCakeHelperCopyParameter -FunctionName "New-StatusCakeHelperPageSpeedTest" Write-Verbose "$($psParams.Keys -join ",")" $psParams.Name = $NewName if($WebsiteURL) { $psParams.WebsiteURL = $WebsiteURL } if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake Page Speed Test")) { $result = New-StatusCakeHelperPageSpeedTest -APICredential $APICredential @psParams -Region $Region } Return $result } <# .SYNOPSIS Gets a StatusCake PageSpeed Test .DESCRIPTION Retrieves a StatusCake PageSpeed Test. If no name or id is supplied all tests are returned. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the PageSpeed Test .PARAMETER Name Name of the PageSpeed test .EXAMPLE C:\PS>Get-StatusCakeHelperPageSpeedTest Retrieve all page speed tests .EXAMPLE C:\PS>Get-StatusCakeHelperPageSpeedTest -Name "Example Page Speed Test" Retrieve page speed test information for a test called "Example Page Speed Test" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/PageSpeed/Get-StatusCakeHelperPageSpeedTest.md .LINK https://www.statuscake.com/api/v1/#tag/pagespeed/operation/get-pagespeed-test .LINK https://www.statuscake.com/api/v1/#operation/get-maintenance-window #> function Get-StatusCakeHelperPageSpeedTest { [CmdletBinding(PositionalBinding=$false,DefaultParameterSetName='All')] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "Name")] [ValidateNotNullOrEmpty()] [string]$Name ) if($Name) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "PageSpeed" | Where-Object{$_.name -eq $Name} } elseif($ID) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "PageSpeed" -ID $ID } else { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "PageSpeed" } Return $statusCakeItem } <# .SYNOPSIS Gets the history of a StatusCake PageSpeed Test .DESCRIPTION Retrieves the history for a StatusCake PageSpeed Test. Use the Days parameter to specify the number of days which should be retrieved. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the PageSpeed Test .PARAMETER Name Name of the PageSpeed test .PARAMETER Before Return only results from before this date .PARAMETER Limit The maximum of number of results to return .EXAMPLE C:\PS>Get-StatusCakeHelperPageSpeedTestHistory -ID 123456 Retrieve the page speed test history for page speed test with id 123456 .EXAMPLE C:\PS>Get-StatusCakeHelperPageSpeedTestHistory -ID 123456 -Before 2022-01-01 Retrieve all page speed test history before the 1st January 2022 .EXAMPLE C:\PS>Get-StatusCakeHelperPageSpeedTestHistory -ID 123456 -Limit 1 Retrieve the history of the most recent page speed test .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/PageSpeed/Get-StatusCakeHelperPageSpeedTestHistory.md .LINK https://www.statuscake.com/api/v1/#tag/pagespeed/operation/list-pagespeed-test-history .OUTPUTS Returns a StatusCake PageSpeed Tests History as an object #> function Get-StatusCakeHelperPageSpeedTestHistory { [CmdletBinding(PositionalBinding=$false)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "name")] [ValidateNotNullOrEmpty()] [string]$Name, [ValidateNotNullOrEmpty()] [datetime]$Before, [ValidateNotNullOrEmpty()] [int]$Limit ) # If name supplied find the ID of the test if($Name) { $statusCakeItem = Get-StatusCakeHelperPageSpeedTest -APICredential $APICredential -Name $Name $ID = $statusCakeItem.id } $metaDataParameters = @{ APICredential = $APICredential Type = "PageSpeed" Property = "History" ID = $ID } if($Before) { $parameter = $Before | ConvertTo-StatusCakeHelperAPIValue -DateUnix @("Before") $metaDataParameters["Parameter"] = $parameter } if($Limit) { $metaDataParameters["ResultLimit"] = $Limit } Return (Get-StatusCakeHelperItemMetadata @metaDataParameters) } <# .SYNOPSIS Create a StatusCake PageSpeed Test .DESCRIPTION Creates a new StatusCake PageSpeed Test using the supplied parameters. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name Name for PageSpeed test .PARAMETER WebsiteURL URL that should be checked .PARAMETER Checkrate Number of seconds between checks .PARAMETER AlertBigger An alert will be sent if the size of the page is larger than this value (kb). A value of 0 prevents alerts being sent. .PARAMETER AlertSlower Time in ms, will alert to Contact Groups if actual time is slower .PARAMETER AlertSmaller Size in kb, will alert to Contact Groups if actual size is smaller .PARAMETER ContactID IDs of selected Contact Groups to alert .PARAMETER Region 2-letter code of the region from which to run the checks. Valid values: AU, CA, DE, FR, IN, JP, NL, SG, UK, US, USW .PARAMETER Paused Whether the test should be run. .PARAMETER Force Force creation of the test even if a test with the same name already exists .PARAMETER Passthru Return the page speed test details instead of the page speed test id .EXAMPLE C:\PS>New-StatusCakeHelperPageSpeedTest -WebsiteURL "https://www.example.com" -Checkrate 60 Region UK -AlertSlower 10000 Create a page speed test to check site "https://www.example.com" every 60 minutes from a UK test server and alert when page speed load time is slower than 10000ms .EXAMPLE C:\PS>New-StatusCakeHelperPageSpeedTest -WebsiteURL "https://www.example.com" -Checkrate 60 -Region UK -AlertSmaller 500 Create a page speed test to check site "https://www.example.com" every 60 minutes from a UK test server and alert when page load is less than 500kb .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/PageSpeed/New-StatusCakeHelperPageSpeedTest.md .LINK https://www.statuscake.com/api/v1/#tag/pagespeed/operation/create-pagespeed-test #> function New-StatusCakeHelperPageSpeedTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(Mandatory=$true)] [ValidatePattern('^((http|https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias('website_url')] [string]$WebsiteURL, [Parameter(Mandatory=$true)] [ValidateSet("60","300","600","900","1800","3600","86400")] [Alias('check_rate')] [int]$Checkrate, [Alias('alert_bigger')] [int]$AlertBigger=0, [Alias('alert_slower')] [int]$AlertSlower=0, [Alias('alert_smaller')] [int]$AlertSmaller=0, [Alias('contact_groups')] [int[]]$ContactID, [Parameter(Mandatory=$true)] [ValidateSet("AU","CA","DE","FR","IN","JP","NL","SG","UK","US","USW")] [string]$Region, [boolean]$Paused, [switch]$Force, [switch]$PassThru ) #If force flag not set then check if an existing test with the same name already exists if(!$Force) { $statusCakeItem = Get-StatusCakeHelperPageSpeedTest -APICredential $APICredential -Name $Name if($statusCakeItem) { Write-Error "Existing pagespeed test(s) found with name [$Name]. Please use a different name for the check or use the -Force argument" Return $null } } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","PassThru") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake Pagespeed Check") ) { Return (New-StatusCakeHelperItem -APICredential $APICredential -Type PageSpeed -Parameter $statusCakeAPIParams -PassThru:$PassThru) } } <# .SYNOPSIS Remove a StatusCake PageSpeed Test .DESCRIPTION Deletes a StatusCake PageSpeed Test using the supplied ID or name. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the PageSpeed Test to remove .PARAMETER Name Name for PageSpeed test .EXAMPLE C:\PS>Remove-StatusCakeHelperPageSpeedTest -ID 123456 Remove page speed test with id 123456 .EXAMPLE C:\PS>Remove-StatusCakeHelperPageSpeedTest -Name "Example PageSpeed Test" Remove page speed test with name "Example PageSpeed Test" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/PageSpeed/Remove-StatusCakeHelperPageSpeedTest.md .LINK https://www.statuscake.com/api/v1/#tag/pagespeed/operation/delete-pagespeed-test #> function Remove-StatusCakeHelperPageSpeedTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [int]$ID, [Parameter(ParameterSetName = "Name")] [string]$Name ) if($Name) { $statusCakeItem = Get-StatusCakeHelperPageSpeedTest -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No PageSpeed test(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple PageSpeed Tests found with name [$Name]. Please delete the PageSpeed test by ID" Return $null } $ID = $statusCakeItem.id } if( $pscmdlet.ShouldProcess("$ID", "Delete StatusCake Pagespeed Test") ) { Return (Remove-StatusCakeHelperItem -APICredential $APICredential -Type PageSpeed -ID $ID) } } <# .SYNOPSIS Updates a StatusCake PageSpeed Test .DESCRIPTION Updates a new StatusCake PageSpeed Test by either its name or ID. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of PageSpeed test to update .PARAMETER Name Name of PageSpeed test to update .PARAMETER WebsiteURL URL that should be checked .PARAMETER Checkrate Number of seconds between checks .PARAMETER AlertBigger An alert will be sent if the size of the page is larger than this value (kb). A value of 0 prevents alerts being sent. .PARAMETER AlertSlower Time in ms, will alert to Contact Groups if actual time is slower. A value of 0 prevents alerts being sent. .PARAMETER AlertSmaller Size in kb, will alert to Contact Groups if actual size is smaller. A value of 0 prevents alerts being sent. .PARAMETER ContactID IDs of selected Contact Groups to alert .PARAMETER Region Statuscake region from which to run the checks. Valid values: AU, CA, DE, FR, IN, JP, NL, SG, UK, US, USW .PARAMETER Paused Whether the test should be run. .EXAMPLE C:\PS>Update-StatusCakeHelperPageSpeedTest -WebsiteURL "https://www.example.com" -Checkrate 60 -Region UK -AlertSlower 10000 Create a page speed test to check site "https://www.example.com" every 60 minutes from a UK test server and alert when page speed load time is slower than 10000ms .EXAMPLE C:\PS>Update-StatusCakeHelperPageSpeedTest -WebsiteURL "https://www.example.com" -Checkrate 60 -Region UK -AlertSmaller 500 Create a page speed test to check site "https://www.example.com" every 60 minutes from a UK test server and alert when page load is less than 500kb .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/PageSpeed/Update-StatusCakeHelperPageSpeedTest.md .LINK https://www.statuscake.com/api/v1/#tag/pagespeed/operation/update-pagespeed-test #> function Update-StatusCakeHelperPageSpeedTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [int]$ID, [Parameter(ParameterSetName = "Name")] [ValidateNotNullOrEmpty()] [string]$Name, [ValidatePattern('^((http|https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias('website_url')] [string]$WebsiteURL, [ValidateSet("60","300","600","900","1800","3600","86400")] [Alias('check_rate')] [int]$Checkrate, [Alias('alert_bigger')] [ValidateNotNullOrEmpty()] [int]$AlertBigger, [Alias('alert_slower')] [ValidateNotNullOrEmpty()] [int]$AlertSlower, [Alias('alert_smaller')] [ValidateNotNullOrEmpty()] [int]$AlertSmaller, [Alias('contact_groups')] [ValidateNotNullOrEmpty()] [int[]]$ContactID, [ValidateSet("AU","CA","DE","FR","IN","JP","NL","SG","UK","US","USW")] [string]$Region, [boolean]$Paused ) if($Name) { $statusCakeItem = Get-StatusCakeHelperPageSpeedTest -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No PageSpeed test(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple PageSpeed Tests found with name [$Name]. Please update the PageSpeed test by ID" Return $null } $ID = $statusCakeItem.id } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","Name") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("$ID", "Update StatusCake Pagespeed Test") ) { Return (Update-StatusCakeHelperItem -APICredential $APICredential -Type PageSpeed -ID $ID -Parameter $statusCakeAPIParams) } } <# .SYNOPSIS Copies the settings of a StatusCake SSL Test .DESCRIPTION Creates a copy of a SSL Test. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Id ID of the SSL Test to be copied .PARAMETER WebsiteURL Website URL of the SSL Test to be copied .PARAMETER NewWebsiteURL Website URL of the new SSL Test .EXAMPLE C:\PS>Copy-StatusCakeHelperSSLTest -WebsiteURL "https://www.example.com" -NewWebsiteURL "https://www.example.org" Create a copy of the SSL test with URL "https://www.example.com" for URL "https://www.example.org" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/SSL/Copy-StatusCakeHelperSSLTest.md #> function Copy-StatusCakeHelperSSLTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [Parameter(ParameterSetName='CopyByName')] [Parameter(ParameterSetName='CopyById')] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [int]$ID, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [ValidatePattern('^((http|https):\/\/)?([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] [string]$WebsiteURL, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [ValidatePattern('^((http|https):\/\/)?([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] [string]$NewWebsiteURL ) if($WebsiteURL) { #If copying by URL check if resource with that URL exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake SSL Tests")) { $statusCakeItem = Get-StatusCakeHelperSSLTest -APICredential $APICredential -WebsiteURL $WebsiteURL if(!$statusCakeItem) { Write-Error "No SSL Test with Specified Name Exists [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple SSL Tests with the same name [$Name] [$($statusCakeItem.ID)]" Return $null } } } elseif($ID) { #If copying by ID verify that a resource with the Id already exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake SSL Tests")) { $statusCakeItem = Get-StatusCakeHelperSSLTest -APICredential $APICredential -id $ID if(!$statusCakeItem) { Write-Error "No SSL Test with Specified ID Exists [$ID]" Return $null } } } $psParams = @{} $psParams = $statusCakeItem | Get-StatusCakeHelperCopyParameter -FunctionName "New-StatusCakeHelperSSLTest" $psParams["website_url"] = $NewWebsiteURL if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake SSL Test")) { $result = New-StatusCakeHelperSSLTest -APICredential $APICredential @psParams } Return $result } <# .SYNOPSIS Gets a StatusCake SSL Test .DESCRIPTION Retrieves a StatusCake SSL Test. If no domain or id is supplied all tests are returned. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER WebsiteURL Name of the test to retrieve .PARAMETER ID Test ID to retrieve .EXAMPLE C:\PS>Get-StatusCakeHelperSSLTest Retrieve all SSL tests .EXAMPLE C:\PS>Get-StatusCakeHelperSSLTest -ID 123456 Retrieve SSL test with ID 123456 .OUTPUTS Returns a StatusCake SSL Tests as an object .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/SSL/Get-StatusCakeHelperSSLTest.md .LINK https://www.statuscake.com/api/v1/#tag/ssl/operation/list-ssl-tests .LINK https://www.statuscake.com/api/v1/#tag/ssl/operation/get-ssl-test #> function Get-StatusCakeHelperSSLTest { [CmdletBinding(PositionalBinding=$false,DefaultParameterSetName='All')] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "Domain")] [ValidatePattern('^((https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias('website_url','Domain')] [string]$WebsiteURL, [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID ) if($WebsiteURL) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "SSL" | Where-Object{$_.website_url -eq $WebsiteURL} } elseif($ID) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "SSL" -ID $ID } else { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "SSL" } Return $statusCakeItem } <# .SYNOPSIS Create a StatusCake SSL Test .DESCRIPTION Creates a new StatusCake SSL Test using the supplied parameters. Default settings for a SSL test will check a URL every day with alerts sent at 7, 14 and 30 days. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER WebsiteURL URL to check .PARAMETER Checkrate Checkrate in seconds. Default is 86400 seconds (1 day). Options are 300 (5 minutes), 600 (10 minutes), 1800 (30 minutes), 3600 (1 hour), 86400 (1 day), 2073600 (24 days) .PARAMETER AlertAt Number of days before expiration when reminders will be sent. Defaults to reminders at 30, 14 and 7 days. Must be 3 numeric values. .PARAMETER AlertBroken Set to true to enable broken alerts. False to disable .PARAMETER AlertExpiry Set to true to enable expiration alerts. False to disable .PARAMETER AlertMixed Set to true to enable mixed content alerts. False to disable .PARAMETER AlertReminder Set to true to enable reminder alerts. False to disable .PARAMETER ContactID Array containing contact IDs to alert. .PARAMETER FollowRedirects Whether to follow redirects when testing. .PARAMETER Hostname Hostname of the server under test .PARAMETER Paused Whether the test should be run. .PARAMETER UserAgent Custom user agent string set when testing .PARAMETER Force Create an SSL test even if one with the same website URL already exists .PARAMETER Passthru Return the SSL test details instead of the SSL test id .EXAMPLE C:\PS>New-StatusCakeHelperSSLTest -WebsiteURL "https://www.example.com" Create a new SSL Test to check https://www.example.com every day .EXAMPLE C:\PS>New-StatusCakeHelperSSLTest -WebsiteURL "https://www.example.com" -AlertAt ("14","30","60") Create a new SSL Test to check https://www.example.com every day with alerts sent at 14, 30 and 60 days. .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/SSL/New-StatusCakeHelperSSLTest.md .LINK https://www.statuscake.com/api/v1/#tag/ssl/operation/create-ssl-test #> function New-StatusCakeHelperSSLTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(Mandatory=$true)] [ValidatePattern('^((https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias('website_url','Domain')] [string]$WebsiteURL, [ValidateSet("300","600","1800","3600","86400","2073600")] [Alias('check_rate')] [int]$Checkrate=86400, [Alias('alert_at')] [ValidateCount(3,3)] [int[]]$AlertAt=@("7","14","30"), [Alias('alert_broken')] [boolean]$AlertBroken, [Alias('alert_expiry')] [boolean]$AlertExpiry=$true, [Alias('alert_mixed')] [boolean]$AlertMixed, [Alias('alert_reminder')] [boolean]$AlertReminder=$true, [Alias('contact_groups')] [int[]]$ContactID, [Alias('follow_redirects')] [boolean]$FollowRedirects, [string]$Hostname, [boolean]$Paused, [Alias('user_agent')] [string]$UserAgent, [switch]$Force, [switch]$PassThru ) #If force flag not set then check if an existing test with the same website url already exists if(!$Force) { $statusCakeItem = Get-StatusCakeHelperSSLTest -APICredential $APICredential -WebsiteURL $WebsiteURL if($statusCakeItem) { Write-Error "Existing SSL test(s) found with name [$Name]. Please use a different name for the check or use the -Force argument" Return $null } } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","PassThru") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake SSL Check") ) { Return (New-StatusCakeHelperItem -APICredential $APICredential -Type SSL -Parameter $statusCakeAPIParams -PassThru:$PassThru) } } <# .SYNOPSIS Remove a StatusCake SSL Test .DESCRIPTION Deletes a StatusCake SSL Test using the supplied ID. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID Test ID to delete .PARAMETER WebsiteURL WebsiteURL SSL test to remove .EXAMPLE C:\PS>Remove-StatusCakeHelperSSLTest -ID 123456 Remove the SSL Test with ID 123456 .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/SSL/Remove-StatusCakeHelperSSLTest.md .LINK https://www.statuscake.com/api/v1/#tag/ssl/operation/delete-ssl-test #> function Remove-StatusCakeHelperSSLTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [int]$ID, [Parameter(ParameterSetName = "Domain")] [ValidatePattern('^((https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias('website_url','Domain')] [string]$WebsiteURL ) if($WebsiteURL) { $statusCakeItem = Get-StatusCakeHelperSSLTest -APICredential $APICredential -WebsiteURL $WebsiteURL if(!$statusCakeItem) { Write-Error "No SSL test(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple SSL Tests found with name [$Name]. Please delete the SSL test by ID" Return $null } $ID = $statusCakeItem.id } if( $pscmdlet.ShouldProcess("$ID", "Remove StatusCake SSL Test") ) { Return (Remove-StatusCakeHelperItem -APICredential $APICredential -Type SSL -ID $ID) } } <# .SYNOPSIS Update a StatusCake SSL Test .DESCRIPTION Updates a new StatusCake SSL Test using the supplied parameters. Default settings for a SSL test will check a URL every day with alerts sent at 7, 14 and 30 days. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID Test ID to update .PARAMETER WebsiteURL URL to check .PARAMETER Checkrate Checkrate in seconds. Default is 86400 seconds (1 day). Options are 300 (5 minutes), 600 (10 minutes), 1800 (30 minutes), 3600 (1 hour), 86400 (1 day), 2073600 (24 days) .PARAMETER AlertAt Number of days before expiration when reminders will be sent. Defaults to reminders at 30, 14 and 7 days. Must be 3 numeric values. .PARAMETER AlertBroken Set to true to enable broken alerts. False to disable .PARAMETER AlertExpiry Set to true to enable expiration alerts. False to disable .PARAMETER AlertMixed Set to true to enable mixed content alerts. False to disable .PARAMETER AlertReminder Set to true to enable reminder alerts. False to disable .PARAMETER ContactID Array containing contact IDs to alert. .PARAMETER FollowRedirect Whether to follow redirects when testing. .PARAMETER Hostname Hostname of the server under test .PARAMETER Paused Whether the test should be run. .PARAMETER UserAgent Custom user agent string set when testing .PARAMETER Force Update an SSL test even if one with the same website URL already exists .EXAMPLE C:\PS>Update-StatusCakeHelperSSLTest -WebsiteURL "https://www.example.com" Update a new SSL Test to check https://www.example.com every day .EXAMPLE C:\PS>Update-StatusCakeHelperSSLTest -WebsiteURL "https://www.example.com" -AlertAt ("14","30","60") Update a new SSL Test to check https://www.example.com every day with alerts sent at 14, 30 and 60 days. .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/SSL/Update-StatusCakeHelperSSLTest.md .LINK https://www.statuscake.com/api/v1/#tag/ssl/operation/update-ssl-test #> function Update-StatusCakeHelperSSLTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "WebsiteURL")] [ValidatePattern('^((https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias('website_url','Domain')] [string]$WebsiteURL, [ValidateSet("300","600","1800","3600","86400","2073600")] [Alias('check_rate')] [int]$Checkrate=86400, [Alias('alert_at')] [ValidateCount(3,3)] [int[]]$AlertAt=@("7","14","30"), [Alias('alert_broken')] [boolean]$AlertBroken, [Alias('alert_expiry')] [boolean]$AlertExpiry=$true, [Alias('alert_mixed')] [boolean]$AlertMixed, [Alias('alert_reminder')] [boolean]$AlertReminder=$true, [Alias('contact_groups')] [int[]]$ContactID, [Alias('follow_redirects')] [boolean]$FollowRedirect, [string]$Hostname, [boolean]$Paused, [Alias('user_agent')] [string]$UserAgent, [switch]$Force ) if($WebsiteURL) { $statusCakeItem = Get-StatusCakeHelperSSLTest -APICredential $APICredential -WebsiteURL $WebsiteURL if(!$statusCakeItem) { Write-Error "No SSL test(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple SSL Tests found with name [$Name]. Please update the SSL test by ID" Return $null } $ID = $statusCakeItem.id } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","Name") | ConvertTo-StatusCakeHelperAPIValue if( $pscmdlet.ShouldProcess("$ID", "Update StatusCake SSL Test") ) { Return (Update-StatusCakeHelperItem -APICredential $APICredential -Type SSL -ID $ID -Parameter $statusCakeAPIParams) } } <# .SYNOPSIS Returns a list of uptime check alerts for a test .DESCRIPTION Returns all alerts that have been triggered for a test by its name or id. The return order is newest alerts are shown first. Alerts to be returned can be filtered by date using the After/Before parameters. The number of alerts returned can be controlled using the Limit argument. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Test to retrieve the triggered alerts for .PARAMETER Name Name of the Test to retrieve the triggered alerts for .PARAMETER Before Return only alerts triggered before this date .PARAMETER After Return only alerts triggered after this date .PARAMETER Limit The maximum of number of results to return .OUTPUTS Returns an object with the details on the alerts triggered .EXAMPLE C:\PS> Get-StatusCakeHelperUptimeAlert -ID 123456 -Before "2017-08-19 13:29:49" Return all the alerts triggered for test ID 123456 since the 19th August 2017 13:29:49 .EXAMPLE C:\PS> Get-StatusCakeHelperUptimeAlert -ID 123456 -After "2018-01-01 00:00:00" -Before "2019-01-01 00:00:00" Return all the alerts triggered for test ID 123456 after the 1st January 2018 but before 1st January 2019 .EXAMPLE C:\PS> Get-StatusCakeHelperUptimeAlert -ID 123456 -Limit 100 Return the last 100 alerts triggered for test ID 123456 .EXAMPLE C:\PS> Get-StatusCakeHelperUptimeAlert -ID 123456 -Limit 1 Return the most recent alert triggered for test ID 123456 .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Uptime/Base/Get-StatusCakeHelperUptimeAlert.md .LINK https://www.statuscake.com/api/v1/#tag/uptime/operation/list-uptime-test-alerts #> function Get-StatusCakeHelperUptimeAlert { [CmdletBinding(PositionalBinding=$false)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "name")] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [ValidateNotNullOrEmpty()] [datetime]$Before, [ValidateNotNullOrEmpty()] [datetime]$After, [ValidateNotNullOrEmpty()] [int]$Limit ) # If name supplied find the ID of the test if($Name) { $statusCakeItem = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -Name $Name $ID = $statusCakeItem.id } $metaDataParameters = @{ APICredential = $APICredential Type = "Uptime" Property = "Alerts" ID = $ID } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $metaDataParameters["Parameter"] = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Limit") | ConvertTo-StatusCakeHelperAPIValue -DateUnix @("Before","After") if($Limit) { $metaDataParameters["ResultLimit"] = $Limit } Return (Get-StatusCakeHelperItemMetadata @metaDataParameters) } <# .SYNOPSIS Returns uptime check history results for tests .DESCRIPTION Returns uptime check history results for tests detailing the runs performed on the StatusCake testing infrastructure. The most recent history results are shown first. Alerts to be returned can be filtered by date using the After/Before parameters. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Test to retrieve the history results for .PARAMETER Name Name of the Test to retrieve the history results for .PARAMETER Before Return only history results created before this date .PARAMETER After Return only history results created after this date .PARAMETER Limit The maximum of number of results to return .OUTPUTS Returns an object with the details from a StatusCake test run .EXAMPLE C:\PS> Get-StatusCakeHelperUptimeHistory -ID 123456 -Before "2017-08-19 13:29:49" Return all the uptime history for test ID 123456 since the 19th August 2017 13:29:49 .EXAMPLE C:\PS> Get-StatusCakeHelperUptimeHistory -ID 123456 -Limit 100 Return the last 100 historical results for test ID 123456 .EXAMPLE C:\PS> Get-StatusCakeHelperUptimeHistory -ID 123456 -Limit 1 Return the most recent historical result for test ID 123456 .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Uptime/Property/Get-StatusCakeHelperUptimeHistory.md .LINK https://www.statuscake.com/api/v1/#tag/uptime/operation/list-uptime-test-history #> function Get-StatusCakeHelperUptimeHistory { [CmdletBinding(PositionalBinding=$false)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "name")] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [ValidateNotNullOrEmpty()] [datetime]$Before, [ValidateNotNullOrEmpty()] [datetime]$After, [int]$Limit ) # If name supplied find the ID of the test if($Name) { $statusCakeItem = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -Name $Name $ID = $statusCakeItem.id } $metaDataParameters = @{ APICredential = $APICredential Type = "Uptime" Property = "History" ID = $ID } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $metaDataParameters["Parameter"] = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Limit") | ConvertTo-StatusCakeHelperAPIValue -DateUnix @("Before","After") if($Limit) { $metaDataParameters["ResultLimit"] = $Limit } Return (Get-StatusCakeHelperItemMetadata @metaDataParameters) } <# .SYNOPSIS Returns a list of uptime check periods for a uptime test .DESCRIPTION Returns a list of uptime check periods for a given id or name, detailing the creation time of the period, when it ended and the duration. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Test to retrieve the uptime check periods for .PARAMETER Name Name of the Test to retrieve the uptime check periods for .PARAMETER Before Return only check periods created before this date .PARAMETER After Return only check periods created after this date .PARAMETER Limit The maximum of number of results to return .OUTPUTS Returns an object with the details of the uptime check periods .EXAMPLE C:\PS> Get-StatusCakeHelperUptimePeriod -TestID 123456 -Before "2017-08-19 13:29:49" Return all the alerts sent for test ID 123456 since the 19th August 2017 13:29:49 .EXAMPLE C:\PS> Get-StatusCakeHelperUptimePeriod -ID 123456 -After "2018-01-01 00:00:00" -Before "2019-01-01 00:00:00" Return all the uptime check periods for test ID 123456 created after the 1st January 2018 but before 1st January 2019 .EXAMPLE C:\PS> Get-StatusCakeHelperUptimePeriod -ID 123456 -Limit 100 Return the last 100 uptime check periods sent for test ID 123456 .EXAMPLE C:\PS> Get-StatusCakeHelperUptimePeriod -ID 123456 -Limit 1 Return the most recent uptime check period sent for test ID 123456 .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Uptime/Property/Get-StatusCakeHelperUptimePeriod.md .LINK https://www.statuscake.com/api/v1/#tag/uptime/operation/list-uptime-test-periods #> function Get-StatusCakeHelperUptimePeriod { [CmdletBinding(PositionalBinding=$false)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "name")] [ValidateNotNullOrEmpty()] [string]$Name, [ValidateNotNullOrEmpty()] [datetime]$Before, [ValidateNotNullOrEmpty()] [datetime]$After, [int]$Limit ) # If name supplied find the ID of the test if($Name) { $statusCakeItem = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -Name $Name $ID = $statusCakeItem.id } $metaDataParameters = @{ APICredential = $APICredential Type = "Uptime" Property = "Periods" ID = $ID } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $metaDataParameters["Parameter"] = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Limit") | ConvertTo-StatusCakeHelperAPIValue -DateUnix @("Before","After") if($Limit) { $metaDataParameters["ResultLimit"] = $Limit } Return (Get-StatusCakeHelperItemMetadata @metaDataParameters) } <# .SYNOPSIS Retrieves all the StatusCake Tests that have been paused more than the specified time unit .DESCRIPTION Retrieves all the tests from StatusCake that are paused and have been tested longer than the supplied parameters. Defaults to returning tests that have been paused more than 24 hours. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Days Specify the number of day(s) (24h period) that the test(s) has been paused .PARAMETER Hours Specify the number of hour(s) that the test(s) has been paused .PARAMETER Minutes Specify the number of minute(s) that the test(s) has been paused .PARAMETER IncludeNotTested If set tests that have never been tested will be included .PARAMETER ExcludeTested If set tests that have been tested will be excluded .EXAMPLE C:\PS>Get-StatusCakeHelperUptimePausedTest Get all tests paused longer than a day .OUTPUTS Returns an object with the StatusCake Detailed Test data #> function Get-StatusCakeHelperUptimePausedTest { [CmdletBinding(PositionalBinding=$false)] [OutputType([System.Collections.Generic.List[PSObject]])] Param( [Parameter(ParameterSetName='Days')] [Parameter(ParameterSetName='Hours')] [Parameter(ParameterSetName='Minutes')] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='Days')] [int]$Days=1, [Parameter(ParameterSetName='Hours')] [int]$Hours, [Parameter(ParameterSetName='Minutes')] [int]$Minutes, [Parameter(ParameterSetName='Days')] [Parameter(ParameterSetName='Hours')] [Parameter(ParameterSetName='Minutes')] [switch]$IncludeNotTested, [Parameter(ParameterSetName='Days')] [Parameter(ParameterSetName='Hours')] [Parameter(ParameterSetName='Minutes')] [switch]$ExcludeTested ) $statusCakePausedTests = Get-StatusCakeHelperUptimeTest -APICredential $APICredential $statusCakePausedTests = $StatusCakePausedTests | Where-Object{$_.Paused -eq "True"} $matchingTests=[System.Collections.Generic.List[PSObject]]::new() Foreach($sctest in $statusCakePausedTests) { $detailedTestData = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -ID $sctest.id if($detailedTestData.status -eq "up" -and $detailedTestData.uptime -eq 0) { Write-Verbose "Uptime test [$($sctest.id) / $($sctest.name)] has never been tested" if($IncludeNotTested) { $matchingTests.Add($sctest) } continue } if($ExcludeTested) { Write-Verbose "Skipping uptime test [$($sctest.id) / $($sctest.name)] as ExcludeTested flag set" continue } $testLastTestTimeSpan = New-TimeSpan -Start $detailedTestData.last_tested_at If($testLastTestTimeSpan.TotalDays -ge $Days -and $hours -eq 0) { Write-Verbose "Uptime test [$($sctest.id) / $($sctest.name)] paused for [$([math]::Round($testLastTestTimeSpan.totaldays,2))] days" $matchingTests.Add($detailedTestData) continue } elseif($testLastTestTimeSpan.Totalhours -ge $Hours -and $minutes -eq 0) { Write-Verbose "Uptime test [$($sctest.id) / $($sctest.name)] paused for [$([int]$($testLastTestTimeSpan.totalhours))] hours" $matchingTests.Add($detailedTestData) } elseif($testLastTestTimeSpan.Totalminutes -ge $Minutes) { Write-Verbose "Uptime test [$($sctest.id) / $($sctest.name)] paused for [$([int]$($testLastTestTimeSpan.totalminutes))] minutes" $matchingTests.Add($detailedTestData) } } Return $matchingTests } <# .SYNOPSIS Resumes a StatusCake test check .DESCRIPTION Resumes a test .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Test to be removed from StatusCake .PARAMETER Name Name of the Test to be removed from StatusCake .EXAMPLE C:\PS>Resume-StatusCakeHelperUptimeTest -Name "Example" Unpause the test called "Example" #> function Resume-StatusCakeHelperUptimeTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='ResumeById',Mandatory=$true)] [int]$ID, [Parameter(ParameterSetName='ResumeByName',Mandatory=$true)] [string]$Name ) if($Name) { #If resuming by name check if resource with that name exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Tests")) { $uptimeTest = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -Name $Name if(!$uptimeTest) { Write-Error "No Test with Specified Name Exists [$Name]" Return $null } elseif($uptimeTest.GetType().Name -eq 'Object[]') { Write-Error "Multiple Tests with the same name [$Name] [$($uptimeTest.ID)]" Return $null } $ID = $uptimeTest.ID } } elseif($ID) { #If resuming by ID verify that a resource with the Id already exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Tests")) { $uptimeTest = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -ID $ID if(!$uptimeTest) { Write-Error "No Test with Specified ID Exists [$ID]" Return $null } $ID = $uptimeTest.ID } } if( $pscmdlet.ShouldProcess("StatusCake API", "Resume StatusCake Test")) { $result = Update-StatusCakeHelperUptimeTest -APICredential $APICredential -ID $ID -Paused $false } Return $result } <# .SYNOPSIS Pauses a StatusCake test check .DESCRIPTION Pauses a test. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Test to be removed from StatusCake .PARAMETER Name Name of the Test to be removed from StatusCake .EXAMPLE C:\PS>Suspend-StatusCakeHelperUptimeTest -Name "Example" Pauses the test called "Example" #> function Suspend-StatusCakeHelperUptimeTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='PauseById',Mandatory=$true)] [int]$ID, [Parameter(ParameterSetName='PauseByName',Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Name ) if($Name) { #If pausing by name check if resource with that name exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Tests")) { $testCheck = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -Name $Name if(!$testCheck) { Write-Error "No Test with Specified Name Exists [$Name]" Return $null } elseif($testCheck.GetType().Name -eq 'Object[]') { Write-Error "Multiple Tests with the same name [$Name] [$($testCheck.ID)]" Return $null } $ID = $testCheck.ID } } elseif($ID) { #If pausing by ID verify that a resource with the Id already exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Tests")) { $testCheck = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -ID $ID if(!$testCheck) { Write-Error "No Test with Specified ID Exists [$ID]" Return $null } $ID = $testCheck.ID } } if( $pscmdlet.ShouldProcess("StatusCake API", "Suspend StatusCake Test")) { $result = Update-StatusCakeHelperUptimeTest -APICredential $APICredential -ID $ID -Paused $true } Return $result } <# .SYNOPSIS Copies the settings of a StatusCake test check .DESCRIPTION Creates a copy of a test. Supply the TestURL or Paused parameter to override the original values in the source test. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID The uptime test ID to modify the details for .PARAMETER Name Name of the uptime Test .PARAMETER WebsiteURL Website URL to be used in the copied test .PARAMETER NewName Name of the new copied uptime test .PARAMETER Paused If supplied sets the state of the test should be after it is copied. .EXAMPLE C:\PS>Copy-StatusCakeHelperUptimeTest -Name "Example" -NewName "Example - Copy" Create a copy of test "Example" with name "Example - Copy" .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Uptime/Copy-StatusCakeHelperUptimeTest.md #> function Copy-StatusCakeHelperUptimeTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [Parameter(ParameterSetName='CopyByName')] [Parameter(ParameterSetName='CopyById')] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [int]$ID, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [ValidateNotNullOrEmpty()] [String]$Name, [Parameter(ParameterSetName='CopyByName')] [Parameter(ParameterSetName='CopyById')] [ValidatePattern('^((http|https):\/\/)?([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] [String]$WebsiteURL, [Parameter(ParameterSetName='CopyByName',Mandatory=$true)] [Parameter(ParameterSetName='CopyById',Mandatory=$true)] [ValidateNotNullOrEmpty()] [String]$NewName, [Parameter(ParameterSetName='CopyByName')] [Parameter(ParameterSetName='CopyById')] [Boolean]$Paused ) if($Name) { #If copying by name check if resource with that name exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Tests")) { $statusCakeItem = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No Uptime test with Specified Name Exists [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple Uptime tests with the same name [$Name] [$($statusCakeItem.ID)]" Return $null } $ID = $statusCakeItem.ID } } elseif($ID) { #If copying by ID verify that a resource with the Id already exists if( $pscmdlet.ShouldProcess("StatusCake API", "Retrieve StatusCake Tests")) { $statusCakeItem = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -ID $ID if(!$statusCakeItem) { Write-Error "No Test with Specified ID Exists [$ID]" Return $null } $ID = $statusCakeItem.ID } } $psParams = @{} $psParams = $statusCakeItem | Get-StatusCakeHelperCopyParameter -FunctionName "New-StatusCakeHelperUptimeTest" Write-Verbose "$($psParams.Keys -join ",")" $psParams.Name = $NewName if($WebsiteURL) { $psParams.WebsiteURL = $WebsiteURL } if($Paused) { $psParams.Paused = $Paused } if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake Uptime Test")) { $result = New-StatusCakeHelperUptimeTest -APICredential $APICredential @psParams } Return $result } <# .SYNOPSIS Retrieves a StatusCake Test with a specific name or Test ID .DESCRIPTION Retrieves StatusCake Test via the test name of the test or Test ID .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID Test ID to retrieve .PARAMETER Name Name of the test to retrieve .PARAMETER Status Filter tests to a specific status .PARAMETER Tag Match tests with tags .PARAMETER MatchAny Match tests which have any of the supplied tags (true) or all of the supplied tags (false). Default is false. .PARAMETER NoUptime Do not calculate uptime percentages for results. Default is false. .PARAMETER Status The status of the uptime tests to be returned .EXAMPLE C:\PS>Get-StatusCakeHelperUptimeTest Retrieve all tests .EXAMPLE C:\PS>Get-StatusCakeHelperUptimeTest -TestID 123456 Retrieve the test with ID 123456 .OUTPUTS Returns the test which exists returning $null if no matching test .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Uptime/Get-StatusCakeHelperUptimeTest.md .LINK https://www.statuscake.com/api/v1/#tag/uptime/operation/list-uptime-tests .LINK https://www.statuscake.com/api/v1/#tag/uptime/operation/get-uptime-test #> function Get-StatusCakeHelperUptimeTest { [CmdletBinding(PositionalBinding=$false,DefaultParameterSetName='MatchTag')] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ByTestID")] [Parameter(ParameterSetName='MatchTag')] [Parameter(ParameterSetName='MatchAnyTag')] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "ByTestName")] [Parameter(ParameterSetName='MatchTag')] [Parameter(ParameterSetName='MatchAnyTag')] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(Mandatory=$false,ParameterSetName='MatchTag')] [Parameter(Mandatory=$true,ParameterSetName='MatchAnyTag')] [Alias('tags')] [string[]]$Tag, [Parameter(Mandatory=$false,ParameterSetName='MatchTag')] [Parameter(Mandatory=$false,ParameterSetName='MatchAnyTag')] [switch]$NoUptime, [Parameter(Mandatory=$false,ParameterSetName='MatchAnyTag')] [switch]$MatchAny, [Parameter(Mandatory=$false,ParameterSetName='MatchTag')] [Parameter(Mandatory=$false,ParameterSetName='MatchAnyTag')] [ValidateSet("down","up")] [string]$Status ) if($Name) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Uptime" | Where-Object{$_.name -eq $Name} if($statusCakeItem) { #Ensure output when retrieving the name is the same as the ID $statusCakeItem = $statusCakeItem.id | ForEach-Object{Get-StatusCakeHelperItem -APICredential $APICredential -Type "Uptime" -ID $_} } } elseif($ID) { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Uptime" -ID $ID } else { $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude @("Force","Limit") if($statusCakeAPIParams.Count -ge 1) { $statusCakeAPIParams = $statusCakeAPIParams | ConvertTo-StatusCakeHelperAPIValue -CsvString "tags" $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Uptime" -Parameter $statusCakeAPIParams } else { $statusCakeItem = Get-StatusCakeHelperItem -APICredential $APICredential -Type "Uptime" } } Return $statusCakeItem } <# .SYNOPSIS Create a StatusCake uptime tes .DESCRIPTION Creates a new StatusCake Uptime Test using the supplied parameters. Only parameters which have been supplied values are set and the defaults for a particular test type are used otherwise. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER Name Name of the Test to be displayed in StatusCake .PARAMETER Type The type of test to create. Valid options are "DNS", "HEAD", "HTTP", "PING", "SMTP", "SSH", "TCP" .PARAMETER WebsiteURL Test location, either an IP (for TCP and Ping) or a fully qualified URL for other TestTypes .PARAMETER CheckRate The interval in seconds between checks. Default is 300 seconds. .PARAMETER BasicUsername A Basic Auth Username to use to login for a HTTP check .PARAMETER BasicPassword If BasicUser is set then this should be the password for the BasicUser for a HTTP check .PARAMETER Confirmation Number of confirmation servers to use must be between 0 and 3 .PARAMETER ContactID An array of contact group IDs to be assigned to the check .PARAMETER CustomHeader Custom HTTP header for the test, must be supplied as as hashtable .PARAMETER DNSIP DNS Tests only. Array of IP addresses to compare against returned DNS records. .PARAMETER DNSServer DNS Tests only. FQDN or IP address of the nameserver to query. .PARAMETER DoNotFind If the value for the FindString parameter should be found to trigger a alert. 1 = will trigger if FindString found .PARAMETER EnableSSLAlert HTTP Tests only. If enabled, tests will send warnings if the SSL certificate is about to expire. .PARAMETER FinalEndpoint Use to specify the expected Final URL in the testing process .PARAMETER FindString A string that should either be found or not found. .PARAMETER FollowRedirect HTTP Tests only. Whether to follow redirects when testing. .PARAMETER HostingProvider Name of the hosting provider .PARAMETER IncludeHeader Include header content in string match search .PARAMETER Region Array of region codes which should be used for the test. .PARAMETER Paused The state of the test should be after it is created. 0 for unpaused, 1 for paused .PARAMETER PingURL A URL to ping if a site goes down .PARAMETER Port The port to use on a TCP/SMTP/SSH test .PARAMETER PostBody Use to populate the POST data field on the test .PARAMETER PostRaw Use to populate the RAW POST data field on the test .PARAMETER Public Set 1 to enable public reporting, 0 to disable .PARAMETER StatusCode Array of StatusCodes that trigger an alert .PARAMETER Tag Array of tags to assign to a test .PARAMETER Timeout Time in seconds before a test times out. Valid values are between 5 and 100 seconds .PARAMETER TriggerRate How many minutes to wait before sending an alert. Valid values are between 0 and 60 minutes .PARAMETER UseJar Set to 1 to enable the Cookie Jar. Required for some redirects. .PARAMETER UserAgent Use to populate the test with a custom user agent .PARAMETER Force Create an uptime test even if one with the same website URL already exists .PARAMETER Passthru Return the uptime test details instead of the uptime test id .EXAMPLE C:\PS>New-StatusCakeHelperUptimeTest -tName "Example" -WebsiteURL "http://www.example.com" -TestType HTTP -CheckRate 300 Create a HTTP test called "Example" with URL http://www.example.com checking every 300 seconds .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Uptime/New-StatusCakeHelperUptimeTest.md .LINK https://www.statuscake.com/api/v1/#tag/uptime/operation/create-uptime-test #> function New-StatusCakeHelperUptimeTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(Mandatory=$true)] [ValidateNotNullOrEmpty()] [string]$Name, [Parameter(Mandatory=$true)] [ValidateSet("DNS","HEAD","HTTP","PING","SMTP","SSH","TCP")] [Alias('test_type',"TestType")] [String]$Type, [Parameter(Mandatory=$true)] [ValidatePattern('^((http|https):\/\/)?([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] [Alias('website_url','Endpoint','Domain','IP','HostName')] [string]$WebsiteURL, [Parameter(Mandatory=$true)] [ValidateSet("0","30","60","300","900","1800","3600","86400")] [Alias('check_rate')] [int]$CheckRate, #Optional parameters [Alias('basic_username')] [string]$BasicUsername, [Alias('basic_password')] [securestring]$BasicPassword, [ValidateRange(0,3)] [int]$Confirmation, [Alias('contact_groups','ContactGroup')] [int[]]$ContactID, [Alias('custom_header')] [hashtable]$CustomHeader, [Alias('do_not_find')] [boolean]$DoNotFind, [Alias("enable_ssl_alert","EnableSSLWarning")] [boolean]$EnableSSLAlert, [ValidatePattern('^((http|https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias('final_endpoint')] [string]$FinalEndpoint, [Alias('find_string')] [string]$FindString, [Alias('follow_redirects')] [boolean]$FollowRedirect, [Alias('host')] [string]$HostingProvider, [Alias('include_header')] [boolean]$IncludeHeader, [boolean]$Paused, [Alias('post_body')] [object]$PostBody, [Alias('post_raw')] [string]$PostRaw, [ValidateScript({ if(!($_ | Test-StatusCakeHelperRegionCode)){ Throw "Supplied region code is invalid [$_]" } else{$true} })] [Alias('regions')] [String[]]$Region, [ValidateScript({ if(!($_ | Test-StatusCakeHelperHTTPStatusCode)){ Throw "HTTP Status Code invalid [$_]" } else{$true} })] [Alias('status_codes_csv')] [int[]]$StatusCode, [Alias('tags')] [string[]]$Tag, [ValidateRange(5,75)] [int]$Timeout, [ValidateRange(0,60)] [Alias('trigger_rate')] [int]$TriggerRate, [Alias('use_jar')] [boolean]$UseJar, [Alias('user_agent')] [string]$UserAgent, [switch]$Force, [switch]$PassThru ) DynamicParam { $paramDictionary = [System.Management.Automation.RuntimeDefinedParameterDictionary]::new() if($Type -eq "TCP" -or $Type -eq "SMTP" -or $Type -eq "SSH") { $portParameter = New-StatusCakeHelperDynamicParameter -Name "Port" -Type "int" -Mandatory $true -ValidateRange @(1,65535) $paramDictionary.Add("Port",$portParameter) } elseif($Type -eq "DNS") { $dnsIPsParameter = New-StatusCakeHelperDynamicParameter -Name "DNSIPs" -Type "string[]" -Mandatory $true -Alias @("dns_ips") ` -ValidateScript { if(!($_ | Test-StatusCakeHelperIPAddress)){ Throw "Supplied IP Address is invalid [$_]" } else{$true} } $paramDictionary.Add("DNSIPs",$dnsIPsParameter) $dnsServerParameter = New-StatusCakeHelperDynamicParameter -Name "DNSServer" -Type "string" -Mandatory $true -Alias ("dns_server") ` -ValidatePattern '([a-zA-Z0-9\-]{2,}\.[a-zA-Z\-]{2,})(\.[a-zA-Z\-]{2,})?(\.[a-zA-Z\-]{2,})?|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$' $paramDictionary.Add("DNSServer",$dnsServerParameter) } return $paramDictionary } Process { #If force flag not set then check if an existing test with the same name already exists if(!$Force) { $statusCakeItem = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -Name $Name if($statusCakeItem) { Write-Error "Existing uptime test(s) found with name [$Name]. Please use a different name for the check or use the -Force argument" Return $null } } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude "Force" | ConvertTo-StatusCakeHelperAPIValue -CsvString @("status_codes_csv") if( $pscmdlet.ShouldProcess("StatusCake API", "Create StatusCake Uptime Check") ) { Return (New-StatusCakeHelperItem -APICredential $APICredential -Type Uptime -Parameter $statusCakeAPIParams -PassThru:$PassThru) } } } <# .SYNOPSIS Removes the specified StatusCake Test .DESCRIPTION Removes the StatusCake test via it's Test ID or name .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Test to be removed from StatusCake .PARAMETER Name Name of the Test to be removed from StatusCake .EXAMPLE C:\PS>Remove-StatusCakeHelperUptimeTest -TestID 123456 Delete the StatusCake test with ID 123456 .OUTPUTS Returns the result of the test removal as an object .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Uptime/Remove-StatusCakeHelperUptimeTest.md .LINK https://www.statuscake.com/api/v1/#tag/uptime/operation/delete-uptime-test #> function Remove-StatusCakeHelperUptimeTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "Name")] [ValidateNotNullOrEmpty()] [string]$Name ) if($Name) { $statusCakeItem = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No uptime test(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple uptime tests found with name [$Name]. Please delete the Uptime test by ID" Return $null } $ID = $statusCakeItem.id } if( $pscmdlet.ShouldProcess("$ID", "Delete StatusCake Uptime Test") ) { Return (Remove-StatusCakeHelperItem -APICredential $APICredential -Type Uptime -ID $ID) } } <# .SYNOPSIS Create a StatusCake uptime tes .DESCRIPTION Creates a new StatusCake Uptime Test using the supplied parameters. Only parameters which have been supplied values are set and the defaults for a particular test type are used otherwise. .PARAMETER APICredential Credentials to access StatusCake API .PARAMETER ID ID of the Test to be updated in StatusCake .PARAMETER Name Name of the Test to be updated in StatusCake .PARAMETER Type The type of test to create. Valid options are "DNS", "HEAD", "HTTP", "PING", "SMTP", "SSH", "TCP" .PARAMETER WebsiteURL Test location, either an IP (for TCP and Ping) or a fully qualified URL for other TestTypes .PARAMETER CheckRate The interval in seconds between checks. Default is 300 seconds. .PARAMETER BasicUsername A Basic Auth Username to use to login for a HTTP check .PARAMETER BasicPassword If BasicUser is set then this should be the password for the BasicUser for a HTTP check .PARAMETER Confirmation Number of confirmation servers to use must be between 0 and 3 .PARAMETER ContactID An array of contact group IDs to be assigned to the check .PARAMETER CustomHeader Custom HTTP header for the test, must be supplied as as hashtable .PARAMETER DNSIP DNS Tests only. IP to compare against WebsiteURL value. .PARAMETER DNSServer DNS Tests only. Hostname or IP of DNS server to use. .PARAMETER DoNotFind If the value for the FindString parameter should be found to trigger a alert. 1 = will trigger if FindString found .PARAMETER EnableSSLAlert HTTP Tests only. If enabled, tests will send warnings if the SSL certificate is about to expire. .PARAMETER FinalEndpoint Use to specify the expected Final URL in the testing process .PARAMETER FindString A string that should either be found or not found. .PARAMETER FollowRedirect HTTP Tests only. Whether to follow redirects when testing. .PARAMETER HostingProvider Name of the hosting provider .PARAMETER IncludeHeader Include header content in string match search .PARAMETER Regions List of region codes which should be used for the test. .PARAMETER Paused The state of the test should be after it is created. 0 for unpaused, 1 for paused .PARAMETER Port The port to use on a TCP/SMTP/SSH test .PARAMETER PostBody Use to populate the POST data field on the test .PARAMETER PostRaw Use to populate the RAW POST data field on the test .PARAMETER Public Set 1 to enable public reporting, 0 to disable .PARAMETER StatusCodes Array of StatusCodes that trigger an alert .PARAMETER Tags Array of tags to assign to a test .PARAMETER Timeout Time in seconds before a test times out. Valid values are between 5 and 100 seconds .PARAMETER TriggerRate How many minutes to wait before sending an alert. Valid values are between 0 and 60 minutes .PARAMETER UseJar Set to 1 to enable the Cookie Jar. Required for some redirects. .PARAMETER UserAgent Use to populate the test with a custom user agent .PARAMETER Force Create an uptime test even if one with the same website URL already exists .EXAMPLE C:\PS>Update-StatusCakeHelperUptimeTest -tName "Example" -WebsiteURL "http://www.example.com" -TestType HTTP -CheckRate 300 Create a HTTP test called "Example" with URL http://www.example.com checking every 300 seconds .LINK https://github.com/Oliver-Lii/statuscake-helpers/blob/master/Documentation/Uptime/Update-StatusCakeHelperUptimeTest.md .LINK https://www.statuscake.com/api/v1/#tag/uptime/operation/create-uptime-test #> function Update-StatusCakeHelperUptimeTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(ParameterSetName = "ID")] [ValidateNotNullOrEmpty()] [int]$ID, [Parameter(ParameterSetName = "Name")] [ValidateNotNullOrEmpty()] [string]$Name, [ValidateSet("DNS","HEAD","HTTP","PING","SMTP","SSH","TCP")] [Alias('test_type',"TestType")] [String]$Type, [ValidatePattern('^((http|https):\/\/)?([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] [Alias('website_url','Endpoint','Domain','IP','HostName')] [string]$WebsiteURL, [ValidateSet("0","30","60","300","900","1800","3600","86400")] [Alias('check_rate')] [int]$CheckRate, #Optional parameters [Alias('basic_username')] [string]$BasicUsername, [Alias('basic_password')] [securestring]$BasicPassword, [ValidateRange(0,3)] [int]$Confirmation, [Alias('contact_groups','ContactGroup')] [int[]]$ContactID, [Alias('custom_header')] [hashtable]$CustomHeader, [ValidateScript({ if(!($_ | Test-StatusCakeHelperIPAddress)){ Throw "Supplied IP Address is invalid [$_]" } else{$true} })] [Alias('dns_ips')] [string]$DNSIP, [ValidatePattern('^([a-zA-Z0-9]{2,}\.[a-zA-Z]{2,})(\.[a-zA-Z]{2,})?|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] [Alias('dns_server')] [string]$DNSServer, [Alias('do_not_find')] [boolean]$DoNotFind, [Alias("enable_ssl_alert","EnableSSLWarning")] [boolean]$EnableSSLAlert, [ValidatePattern('^((http|https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] [Alias('final_endpoint')] [string]$FinalEndpoint, [Alias('find_string')] [string]$FindString, [Alias('follow_redirects')] [boolean]$FollowRedirect, [Alias('host')] [string]$HostingProvider, [Alias('include_header')] [boolean]$IncludeHeader, [boolean]$Paused, [ValidateRange(1,65535)] [int]$Port, [Alias('post_body')] [object]$PostBody, [Alias('post_raw')] [string]$PostRaw, [ValidateScript({ if(!($_ | Test-StatusCakeHelperRegionCode)){ Throw "Supplied region code is invalid [$_]" } else{$true} })] [String[]]$Regions, [ValidateScript({ if(!($_ | Test-StatusCakeHelperHTTPStatusCode)){ Throw "HTTP Status Code invalid [$_]" } else{$true} })] [Alias('status_codes_csv')] [int[]]$StatusCodes, [string[]]$Tags, [ValidateRange(5,75)] [int]$Timeout, [ValidateRange(0,60)] [Alias('trigger_rate')] [int]$TriggerRate, [Alias('use_jar')] [boolean]$UseJar, [Alias('user_agent')] [string]$UserAgent ) if($Name) { $statusCakeItem = Get-StatusCakeHelperUptimeTest -APICredential $APICredential -Name $Name if(!$statusCakeItem) { Write-Error "No Uptime test(s) found with name [$Name]" Return $null } elseif($statusCakeItem.GetType().Name -eq 'Object[]') { Write-Error "Multiple Uptime Tests found with name [$Name]. Please update the Uptime test by ID" Return $null } $ID = $statusCakeItem.id } $allParameterValues = $MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters $statusCakeAPIParams = $allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation -Exclude "Force" | ConvertTo-StatusCakeHelperAPIValue -CsvString @("status_codes_csv") if( $pscmdlet.ShouldProcess("$ID", "Update StatusCake Uptime Test") ) { Return (Update-StatusCakeHelperItem -APICredential $APICredential -Type Uptime -ID $ID -Parameter $statusCakeAPIParams) } } <# .SYNOPSIS Tests to confirm that a supplied string is a valid email address .DESCRIPTION Tests to confirm that a supplied string is a valid email address .PARAMETER EmailAddress String containing the email address to be tested .OUTPUTS Returns true if email address is valid .EXAMPLE C:\PS>"test@example.com" | Test-StatusCakeHelperEmailAddress Test if the string "test@example.com" is a valid email address #> function Test-StatusCakeHelperEmailAddress { [CmdletBinding(PositionalBinding=$false)] [OutputType([System.Boolean])] Param( [Parameter(Mandatory=$True, ValueFromPipeline=$True)] [string] $EmailAddress ) Process { if($EmailAddress -match '^[A-Za-z0-9._%+-]+@[A-Za-z0-9.-]+\.[A-Za-z]{2,}$') { Return $true } Return $false } } <# .SYNOPSIS Tests to confirm that a supplied IP Address is valid .DESCRIPTION Tests to confirm that a supplied IP Address is valid. The IP Address class is used to determine if the supplied IP address is valid. .PARAMETER IPAddress IP Address to test is valid .EXAMPLE C:\PS>"10.0.0.1" | Test-StatusCakeHelperIPAddress Test if the value 10.0.0.1 is a valid IP address .OUTPUTS Returns true if the IP Address is valid #> function Test-StatusCakeHelperIPAddress { [CmdletBinding(PositionalBinding=$false)] [OutputType([System.Boolean])] Param( [Parameter(Mandatory=$True, ValueFromPipeline=$True)] [string] $IPAddress ) Process{ Return $IPAddress -as [IPAddress] -as [Bool] } } <# .SYNOPSIS Tests to confirm that a supplied phone number has a valid phone number format .DESCRIPTION Tests to confirm that a supplied phone number is in the E.164 phone number format .PARAMETER MobileNumber String containing phone number .EXAMPLE C:\PS>"+1023456789" | Test-StatusCakeHelperMobileNumber Test to confirm that "+1023456789" is in E.164 phone number format .OUTPUTS Returns true if mobile number is valid #> function Test-StatusCakeHelperMobileNumber { [CmdletBinding(PositionalBinding=$false)] [OutputType([System.Boolean])] Param( [Parameter(Mandatory=$True, ValueFromPipeline=$True)] [string] $MobileNumber ) Process { if($MobileNumber -match '^\+[1-9]{1}[0-9]{9,14}$') { Return $true } Return $false } } <# .SYNOPSIS Tests to confirm that a supplied region code is valid .DESCRIPTION Tests to confirm that a supplied region code is valid. Test is carried out by retrieving the list of all region codes and verifying the string is present in the list. .PARAMETER RegionCode Region code to validate .PARAMETER StatusCakeRegionCodes List of StatusCake Region Codes. .PARAMETER Refresh Refresh the list of region codes the function has stored. .EXAMPLE C:\PS>"london" | Test-StatusCakeHelperRegion Test if "london" is a valid StatusCake node location .OUTPUTS Returns true if node location server code is valid #> function Test-StatusCakeHelperRegionCode { [CmdletBinding(PositionalBinding=$false)] [OutputType([System.Boolean])] Param( [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $APICredential = (Get-StatusCakeHelperAPIAuth), [Parameter(Mandatory=$True, ValueFromPipeline=$True)] [string] $RegionCode, [string[]]$StatusCakeRegionCodes, [switch]$Refresh ) Process{ If($PSDefaultParameterValues.ContainsKey("Test-StatusCakeHelperRegion:StatusCakeRegionCodes")) { $StatusCakeRegionCodes = $PSDefaultParameterValues["Test-StatusCakeHelperRegion:StatusCakeRegionCodes"] } elseif($Refresh) { # Update the list of region code stored by the function $StatusCakeRegionCodes = (Get-StatusCakeHelperLocation -APICredential $APICredential).region_code | Sort-Object -Unique $PSDefaultParameterValues["Test-StatusCakeHelperRegion:StatusCakeRegionCodes"] = $StatusCakeRegionCodes } elseif(! $StatusCakeRegionCodes) { $StatusCakeRegionCodes = (Get-StatusCakeHelperLocation -APICredential $APICredential).region_code | Sort-Object -Unique $PSDefaultParameterValues["Test-StatusCakeHelperRegion:StatusCakeRegionCodes"] = $StatusCakeRegionCodes } if($StatusCakeRegionCodes -contains $RegionCode) { Return $true } Return $false } } <# .SYNOPSIS Tests to confirm that a supplied HTTP Status Code is valid .DESCRIPTION Tests to confirm that a supplied HTTP Status Code is valid .PARAMETER StatusCode StatusCode to test is valid .EXAMPLE C:\PS>"404" | Test-StatusCakeHelperHTTPStatusCode Test if the value 404 is a valid status code .OUTPUTS Returns true if HTTP Status Code code is valid #> function Test-StatusCakeHelperHTTPStatusCode { [CmdletBinding(PositionalBinding=$false)] [OutputType([System.Boolean])] Param( [Parameter(Mandatory=$True, ValueFromPipeline=$True)] [string] $StatusCode ) Process{ Return $StatusCode -as [System.Net.HttpStatusCode] -as [Bool] } } <# .SYNOPSIS Tests to confirm that a supplied TimeZone is valid .DESCRIPTION Tests to confirm that a supplied TimeZone is valid .PARAMETER TimeZone TimeZone string to test is valid .PARAMETER TimeZoneFile Path to JSON file containing valid timezones .EXAMPLE C:\PS>"UTC" | Test-StatusCakeHelperTimeZone Test if UTC is a valid time zone .OUTPUTS Returns true if Time Zone is valid #> function Test-StatusCakeHelperTimeZone { [CmdletBinding(PositionalBinding=$false)] [OutputType([System.Boolean])] Param( [Parameter(Mandatory=$True, ValueFromPipeline=$True)] [string] $TimeZone, [string] $TimeZoneFile="$PSScriptRoot\Files\TimeZones.json" ) Process { $timeZoneList = Get-Content $TimeZoneFile | ConvertFrom-Json if($timeZoneList -contains $TimeZone) { Return $true } Return $false } } <# .SYNOPSIS Tests to confirm that a supplied HTTP Status Code is valid .DESCRIPTION Tests to confirm that a supplied HTTP Status Code is valid. The URL is tested using the URI class with the uri well formed method and verifying scheme is http and/or https. .PARAMETER URL URL to test is valid .EXAMPLE C:\PS>"https://www.example.com" | Test-StatusCakeHelperURL Test if the value https://www.example.com is a valid URL .OUTPUTS Returns true if the supplied string is a URL #> function Test-StatusCakeHelperURL { [CmdletBinding(PositionalBinding=$false)] [OutputType([System.Boolean])] Param( [Parameter(Mandatory=$True, ValueFromPipeline=$True)] [string] $URL ) Process{ Return [uri]::IsWellFormedUriString($URL, 'Absolute') -and ([uri] $uri).Scheme -in 'http', 'https' } } <# .SYNOPSIS Converts a hashtable of parameter values to the format expected by the StatusCake API .DESCRIPTION Converts a hashtable of parameter values to the format expected by the StatusCake API .PARAMETER InputHashTable Hashtable containing the parameters and values to be converted .PARAMETER DateUnix Keys with values which should be converted to Unix timestamp instead of RFC3339 format .PARAMETER CsvString Key with values which should be converted to a CSV string instead of as an array .EXAMPLE C:\PS>$inputHashtable | ConvertTo-StatusCakeHelperAPIValue Convert values of a hashtable into values to the format expected by StatusCake API #> function ConvertTo-StatusCakeHelperAPIValue { [CmdletBinding()] [OutputType([hashtable])] Param( [Parameter(Mandatory=$True,ValueFromPipeline=$True)] [hashtable] $InputHashTable, [string[]]$DateUnix, [string[]]$CsvString ) Process { $workingHashtable = $PSBoundParameters["InputHashTable"] $outputHashtable = @{} foreach ($var in $workingHashtable.GetEnumerator()) { $name = $var.name switch($var.value.GetType().Name) { 'Boolean'{ # Boolean should be converted to lower case "true/false" $value = "false" If($var.value -eq $true){ $value = "true" } $outputHashtable.Add($name,$value) Break } 'DateTime'{ #Dates needs to be in RFC3339 unless Unix timestamp has been specified for the parameter if($name -in $DateUnix) { [int64]$value = ($var.value).ToUniversalTime() | Get-Date -UFormat %s } else { $value = ($var.value).ToUniversalTime() | Get-Date -Format s $value = "$value`Z" } $outputHashtable.Add($name,$value) Break } 'Hashtable'{ # Hash table should be converted to JSON (CustomHeader) $value = $var.value | ConvertTo-Json $outputHashtable.Add($name,$value) Break } 'IPAddress[]'{ # IP Address string should be used $ipAddresses = [System.Collections.Generic.List[PSObject]]::new() $value = $var.value | ForEach-Object{$ipAddresses.Add($_.IPAddressToString)} $outputHashtable.Add($name,$value) Break } 'Object'{ # Hash table should be converted to JSON (CustomHeader) $value = $var.value | ConvertTo-Json $outputHashtable.Add($name,$value) Break } 'Object[]'{ #Convert arrays to CSV if specified $value = $var.value if($name -in $CsvString) { $value = $var.value -join "," } $outputHashtable.Add($name,$value) Break } 'SecureString'{ #SecureString needs to be converted to plaintext $Credentials = New-Object System.Management.Automation.PSCredential -ArgumentList "UserName", $var.value $value = $Credentials.GetNetworkCredential().Password Write-Verbose "[$($var.name)] [$($var.value.GetType().Name)] will be added with value [$("*".PadRight(8, "*"))]" $outputHashtable.Add($name,$value) Break } 'String[]'{ #Convert arrays to CSV if specified $value = $var.value if($name -in $CsvString) { $value = $var.value -join "," } $outputHashtable.Add($name,$value) Break } 'Uri'{ # Original string of URI should be used $value = $($var.value).OriginalString $outputHashtable.Add($name,$value) Break } default { $value = $var.value $outputHashtable.Add($name,$value) } } if($var.value.GetType().Name -ne 'SecureString') { Write-Verbose "[$($var.name)] [$($var.value.GetType().Name)] will be added with value [$value]" } } Return $outputHashtable } } <# .SYNOPSIS Converts a PSCustomObject to a hashtable .DESCRIPTION Converts a PSCustomObject to a hashtable. .PARAMETER PSCustomObject PSCustomObject to be converted .PARAMETER IncludeNull Flag to include properties with null values in returned hashtable .EXAMPLE C:\PS>$PSCustomObject | ConvertTo-StatusCakeHelperHashtableFromPSCustomObject Convert a PSCustomObject into a hashtable #> function ConvertTo-StatusCakeHelperHashtableFromPSCustomObject { [CmdletBinding()] [OutputType([hashtable])] Param( [Parameter(Mandatory=$True,ValueFromPipeline=$True)] [Object] $PSCustomObject, [switch] $IncludeNull ) Process { $hashtable = @{} $properties = $PSCustomObject | Get-Member -MemberType *Property foreach($property in $properties) { $value = $PSCustomObject | Select-Object -ExpandProperty ($property.name) if($null -ne $value -and !([string]::IsNullOrEmpty($value)) -or $IncludeNull) { $hashtable[$property.name] = $value } } return $hashtable } } <# .SYNOPSIS Converts a hashtable of parameters to the request body type for the StatusCake API .DESCRIPTION Converts a hashtable of parameters to the request body type for the StatusCake API .PARAMETER InputHashTable Hashtable containing the parameters to be converted .EXAMPLE C:\PS>$inputHashtable | ConvertTo-StatusCakeHelperXW3FormUrlEncoded Convert a hashtable to application/x-www-form-urlencoded content body type #> function ConvertTo-StatusCakeHelperXW3FormUrlEncoded { [CmdletBinding()] [OutputType([string])] Param( [Parameter(Mandatory=$True,ValueFromPipeline=$True)] [hashtable] $InputHashTable ) Process { $workingHashtable = $PSBoundParameters["InputHashTable"] $parameterArray = [System.Collections.Generic.List[PSObject]]::new() $outputString = "" foreach ($var in $workingHashtable.GetEnumerator()) { $name = $var.name switch($var.value.GetType().BaseType.Name) { 'Array'{ # Prefix key with "[]" and add copy of key for each value $name = $([uri]::EscapeDataString("$name[]")) $var.value | ForEach-Object{$parameterArray.Add("$name=$([uri]::EscapeDataString(($_)))")} Break } default { $name = [uri]::EscapeDataString($name) $value = [uri]::EscapeDataString(($var.value)) $parameterArray.Add("$name=$value") } } $outputString = $parameterArray -join "&" } Return $outputString } } <# .SYNOPSIS Gets the StatusCake API Username and API Key .DESCRIPTION Returns a PSCredential object containing the StatusCake API Credential .PARAMETER Credential Credential object should not be passed to function but set using Set-StatusCakeHelperAPIAuth .EXAMPLE C:\PS>Get-StatusCakeHelperAPIAuth Retrieve the credential from the session if available or from the credential file if credentials have not been set for the session. #> function Get-StatusCakeHelperAPIAuth { [CmdletBinding()] [OutputType([System.Management.Automation.PSCredential])] Param( [System.Management.Automation.PSCredential] $Credential ) if($PSDefaultParameterValues.ContainsKey("Get-StatusCakeHelperAPIAuth:Credential")) { $Credential = $PSDefaultParameterValues["Get-StatusCakeHelperAPIAuth:Credential"] } elseif(Test-StatusCakeHelperAPIAuthSet) { $moduleName = (Get-Command $MyInvocation.MyCommand.Name).Source $Credential = Import-CliXml -Path "$env:userprofile\.$moduleName\$moduleName-Credentials.xml" } Return $Credential } <# .SYNOPSIS Gets the StatusCake API error response .DESCRIPTION Get the StatusCake API error response. In Powershell 5.1 the error response has to be retrieved if a web exception error is thrown by Invoke-RestMethod. .PARAMETER ExceptionResponseStream Exception response stream containing the error details to be extracted .EXAMPLE C:\PS>$_.Exception.Response.GetResponseStream() | Get-StatusCakeHelperAPIErrorResponse Retrieve the details of the error returned by the StatusCake API #> function Get-StatusCakeHelperAPIErrorResponse { [CmdletBinding()] Param( [Parameter(Mandatory=$True,ValueFromPipeline=$True)] $ExceptionResponseStream ) Process { $streamReader = New-Object System.IO.StreamReader($ExceptionResponseStream) $streamReader.BaseStream.Position = 0 $errorResponse = $streamReader.ReadToEnd() | ConvertFrom-Json #Get all the error response property names $errorProperties = $errorResponse.errors | Get-Member -MemberType NoteProperty | Select-Object -ExpandProperty "Name" $apiErrors = [System.Collections.Generic.List[PSObject]]::new() #Collate the error property details into a single array $errorProperties | ForEach-Object{ $errorPropMsg = $errorResponse.errors | Select-Object -ExpandProperty $_ $apiErrors.Add("[$_] $errorPropMsg") } $statusCakeAPIError = [PSCustomObject]@{ Message = $errorResponse.message Errors = $apiErrors } Return $statusCakeAPIError } } <# .SYNOPSIS Retrieves the StatusCake API parameters .DESCRIPTION Retrieves the StatusCake API parameter names from the parameter aliases defined in the function and modifies them to meet the StatusCake API requirements. .PARAMETER InputHashTable Hashtable containing the values to pass to the StatusCake API .PARAMETER InvocationInfo InvocationInfo object from the calling function .PARAMETER Clear Array of key names for which the values should be sent empty to StatusCake API .PARAMETER Join Hashtable containing values which need to be joined by specific separator .PARAMETER Exclude Array of parameter names which should be excluded from the output hashtable .EXAMPLE C:\PS>$allParameterValues | Get-StatusCakeHelperAPIParameter -InvocationInfo $MyInvocation Retrieve the StatusCake API parameter names from the supplied invocation object #> Function Get-StatusCakeHelperAPIParameter { [CmdletBinding()] [OutputType([hashtable])] Param( [Parameter(Mandatory=$True,ValueFromPipeline=$True)] [hashtable] $InputHashTable, [System.Management.Automation.InvocationInfo]$InvocationInfo, [string[]] $Clear=@(), [hashtable] $Join=@{}, [string[]] $Exclude=@() ) Process { $parameterAction = $InputHashTable $parameterAction.Remove("InputHashTable") $parameterAction.Remove("InvocationInfo") $outputHashtable = @{} # Avoiding sending any common parameters $Exclude += [System.Management.Automation.PSCmdlet]::CommonParameters $Exclude += [System.Management.Automation.PSCmdlet]::OptionalCommonParameters # APICredential is sent as part of the request header $Exclude += "APICredential" #Remove excluded variables $workingHash = $InputHashTable.GetEnumerator() | Where-Object {$_.Key -notin $Exclude} #Ignore common parameters and find aliases of parameters which need to be renamed $FunctionInfo = (Get-Command -Name $InvocationInfo.InvocationName) $parameterMetadata = $FunctionInfo.Parameters.Values $aliases = $parameterMetadata | Select-Object -Property Name, Aliases | Where-Object {$_.Name -in $workingHash.Key -and $_.Aliases} $rename = @{} foreach($item in $aliases) { # Rename parameter using first alias $rename[$item.name] = $item.aliases[0] } foreach($cItem in $Clear) { If($InputHashTable.ContainsKey($cItem)) { $InputHashTable[$cItem] = "`"`"" } else { $outputHashtable[$cItem] = "`"`"" } } foreach($item in $workingHash) { #API parameter names should be lower cased $itemName = ($item.Name).ToLower() Switch($itemName) { {$rename.ContainsKey($_)}{ $outputHashtable[$rename[$_]] = $InputHashTable[$_] } {$Join.ContainsKey($_)}{ $outputHashtable[$_] = $InputHashTable[$_] -join $Join[$_] } Default { $outputHashtable[$_] = $InputHashTable[$_] } } } Return $outputHashtable } } <# .SYNOPSIS Returns the parameters which can be copied from an object .DESCRIPTION Returns the properties and values of a StatusCake object which be set via the API. Not all parameters returned by StatusCake can by set via the API. The properties of the statuscake object are compared against the parameter names and aliases on the supplied function name. .PARAMETER InputObject StatusCake Object to be copied .PARAMETER FunctionName Name of the function for which the parameters need to be copied .EXAMPLE C:\PS>$statusCakeObject | Get-StatusCakeHelperCopyParameter -FunctionName "New-StatusCakeHelperSSLTest" Return a hashtable of available parameters from the New-StatusCakeHelperSSLTest function #> function Get-StatusCakeHelperCopyParameter { [CmdletBinding(PositionalBinding=$false)] [OutputType([hashtable])] Param( [Parameter(Mandatory=$True,ValueFromPipeline=$True)] [ValidateNotNullOrEmpty()] $InputObject, [Parameter(Mandatory=$True)] [ValidateNotNullOrEmpty()] [string] $FunctionName ) Process { $psParams = @{} $functionInfo = (Get-Command -Name $FunctionName) $parameterList = $functionInfo.Parameters $sourceItemHash = $InputObject | ConvertTo-StatusCakeHelperHashtableFromPSCustomObject $parameterMetadata = $FunctionInfo.Parameters.Values $copyProperties = $parameterMetadata | Select-Object -Property Name, Aliases | Where-Object {$_.Name -in $sourceItemHash.Keys -or ($_.Aliases | Select-Object -First 1) -in $sourceItemHash.Keys} $parameterList = [System.Collections.Generic.List[PSObject]]::new() foreach($item in $copyProperties) { # Add renamed parameter using first alias If($item.aliases[0]) { $parameterList.Add($item.aliases[0]) } else { $parameterList.Add($item.Name) } } $paramsToUse = Compare-Object @($sourceItemHash.Keys) @($parameterList) -IncludeEqual -ExcludeDifferent $paramsToUse = $paramsToUse | Select-Object -ExpandProperty InputObject foreach($key in $paramsToUse) { $psParams[$key]=$sourceItemHash[$key] } Return $psParams } } <# .SYNOPSIS Get the all the parameter which have values .DESCRIPTION Combines the default parameter values with the parameters from bound parameters excluding any null parameters .PARAMETER InvocationInfo InvocationInfo object supplied by the calling function .PARAMETER BoundParameters The $PSBoundParameters hashtable supplied by the calling function .EXAMPLE C:\PS>$MyInvocation | Get-StatusCakeHelperParameterValue -BoundParameters $PSBoundParameters Get all the parameters which values from $MyInvocation and $PSBoundParameter objects .OUTPUTS Returns a hashtable with all parameters which are bound or have non-null defaults #> Function Get-StatusCakeHelperParameterValue { [CmdletBinding()] [OutputType([hashtable])] param( [Parameter(Mandatory=$True,ValueFromPipeline=$True)] [System.Management.Automation.InvocationInfo]$InvocationInfo, [Parameter(Mandatory=$True)] [hashtable]$BoundParameters ) Process { $allParameterValues = @{} foreach($parameter in $InvocationInfo.MyCommand.Parameters.GetEnumerator()) { $value = Get-Variable -Name $parameter.Key -ValueOnly -ErrorAction Ignore # Check if variable value is not null if($null -ne $value) { # Check if variable is not a null type if($value -ne ($null -as $parameter.Value.ParameterType)) { $allParameterValues[$parameter.Key] = $value } } if($BoundParameters.ContainsKey($parameter.Key)) { $allParameterValues[$parameter.Key] = $BoundParameters[$parameter.Key] } } return $allParameterValues } } <# .SYNOPSIS Returns the parameters which can be copied from an object .DESCRIPTION Returns the properties and values of a StatusCake object which be set via the API. Not all parameters returned by StatusCake can by set via the API. The properties of the statuscake object are compared against the parameter names and aliases on the supplied function name. .PARAMETER Name The name of the dynamic parameter to create. .PARAMETER Type The variable type of the parameter to be created .PARAMETER ParameterSetName The name of the parameter set that the variable is a part of .PARAMETER Mandatory Specify if the parameter should be made mandatory .PARAMETER Alias The aliases that the parameter should have .PARAMETER ValidateCount The minimum and maximum number of arguments that a parameter can accept .PARAMETER ValidateLength The minimum and maximum number of characters in the parameter argument .PARAMETER ValidateNotNullOrEmpty Validate whether the parameter can contain a null or empty value .PARAMETER ValidatePattern Regular expression that the parameter argument should meet .PARAMETER ValidateRange The minimum and maximum values in the parameter argument .PARAMETER ValidateScript Script to use for validation of the parameter argument .PARAMETER ValidateSet The set of valid values for the parameter argument .EXAMPLE C:\PS>New-StatusCakeHelperDynamicParameter -Name "Port" -Type $( "int" -as [type]) -Mandatory $true -ValidateRange @(1,65535) Create a new dynamic parameter called Port which is an integer that is mandatory and has a minimum value of 1 and maximum value of 65535 #> function New-StatusCakeHelperDynamicParameter { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] [OutputType([System.Management.Automation.RuntimeDefinedParameter])] Param( [Parameter(Mandatory=$True)] [ValidateNotNullOrEmpty()] [string] $Name, [Parameter(Mandatory=$True)] [ValidateNotNullOrEmpty()] [string] $Type, [string] $ParameterSetName, [boolean] $Mandatory=$false, [string[]] $Alias, [Parameter(ParameterSetName = "ValidateCount")] [ValidateCount(2,2)] [int[]]$ValidateCount, [Parameter(ParameterSetName = "ValidateLength")] [ValidateCount(2,2)] [int[]]$ValidateLength, [Parameter(ParameterSetName = "ValidateNotNullOrEmpty")] [boolean]$ValidateNotNullOrEmpty, [Parameter(ParameterSetName = "ValidatePattern")] [ValidateNotNullOrEmpty()] [string]$ValidatePattern, [Parameter(ParameterSetName = "ValidateRange")] [ValidateCount(2,2)] [int[]]$ValidateRange, [Parameter(ParameterSetName = "ValidateScript")] [ValidateNotNullOrEmpty()] [scriptblock]$ValidateScript, [Parameter(ParameterSetName = "ValidateSet")] [ValidateNotNullOrEmpty()] [string[]]$ValidateSet ) if( $pscmdlet.ShouldProcess("Parameter Attribute", "Create") ) { $parameterAttributes = New-Object -Type System.Management.Automation.ParameterAttribute if($ParameterSetName) { $parameterAttributes.ParameterSetName = $ParameterSetName } $parameterAttributes.Mandatory = $Mandatory $parameterAttributesCollection = New-Object -Type System.Collections.ObjectModel.Collection[System.Attribute] } if($Alias) { $parameterAliasAttribute = New-Object -Type System.Management.Automation.AliasAttribute($Alias) $parameterAttributesCollection.Add($parameterAliasAttribute) } #Add validation objects to parameter attribute collection switch($PsCmdlet.ParameterSetName) { "ValidateCount"{$validationOption = New-Object -Type System.Management.Automation.ValidateCountAttribute($ValidateCount[0],$ValidateCount[1]) ;continue } "ValidateLength"{$validationOption = New-Object -Type System.Management.Automation.ValidateLengthAttribute($ValidateLength[0],$ValidateLength[1]) ;continue } "ValidatePattern"{$validationOption = New-Object -Type System.Management.Automation.ValidatePatternAttribute($ValidatePattern) ;continue } "ValidateRange"{$validationOption = New-Object -Type System.Management.Automation.ValidateRangeAttribute($ValidateRange[0],$ValidateRange[1]) ;continue } "ValidateScript"{$validationOption = New-Object -Type System.Management.Automation.ValidateScriptAttribute($ValidateScript) ;continue } "ValidateSet"{$validationOption = New-Object -Type System.Management.Automation.ValidateSetAttribute ($ValidateSet) ;continue } } If($ValidateNotNullOrEmpty){$validationOption = New-Object -Type System.Management.Automation.ValidateNotNullOrEmptyAttribute} If($validationOption){$parameterAttributesCollection.Add($validationOption)} $parameterAttributesCollection.Add($parameterAttributes) if( $pscmdlet.ShouldProcess("Runtime Defined Parameter", "Create") ) { $dynamicParameter = New-Object -Type System.Management.Automation.RuntimeDefinedParameter( ` $Name, ($Type -as [type]), $parameterAttributesCollection) } return $dynamicParameter } |