Public/Set-StatusCakeHelperTest.ps1
|
<# .Synopsis Set the configuration of a StatusCake test .EXAMPLE Set-StatusCakeHelperTest -Username "Username" -ApiKey "APIKEY" -TestID "123456" -TestName "http://www.example.com" .INPUTS baseTestURL - Base URL endpoint of the statuscake test API Username - Username associated with the API key ApiKey - APIKey to access the StatusCake API TestID - The Test ID to modify the details for <optional parameters> TestName - Name of the Test to be displayed in StatusCake TestURL - Test location, either an IP (for TCP and Ping) or a fully qualified URL for other TestTypes CheckRate - The interval in seconds between checks TestType - The type of test to create Port - The port to use on a TCP test NodeLocations - Test locations to use separated by commas. Test location servercodes are required Paused - The state of the test should be after it is created. 0 for unpaused, 1 for paused Timeout - Time in seconds before a test times out PingURL - A URL to ping if a site goes down CustomHeader - Custom HTTP header for the test, must be supplied as JSON Confirmation - Number of confirmation servers to use must be between 0 and 10 DNSServer - DNS Tests only. Hostname or IP of DNS server to use. DNSIP - DNS Tests only. IP to compare against WebsiteURL value. BasicUser - A Basic Auth User account to use to login for a HTTP check BasicPass - If BasicUser is set then this should be the password for the BasicUser for a HTTP check Public - Set 1 to enable public reporting, 0 to disable LogoImage - A URL to a image to use for public reporting UseJar - Set to 1 to enable the Cookie Jar. Required for some redirects. Branding - Set to 0 to use branding (default) or 1 to disable public reporting branding) WebsiteHost - Used internally by StatusCake Virus - Enable virus checking or not. 1 to enable FindString - A string that should either be found or not found. DoNotFind - If the above string should be found to trigger a alert. 1 = will trigger if FindString found ContactGroup - A contact group ID assoicated with account to use. RealBrowser - Use 1 to TURN OFF real browser testing TriggerRate - How many minutes to wait before sending an alert TestTags - Tags should be seperated by a comma - no spacing between tags (this,is,a set,of,tags) StatusCodes - Comma Seperated List of StatusCodes to Trigger Error on (on Update will replace, so send full list each time) EnableSSLWarning - HTTP Tests only. If enabled, tests will send warnings if the SSL certificate is about to expire. Paid users only FollowRedirect - HTTP Tests only. If enabled, our tests will follow redirects and logo the status of the final page. .FUNCTIONALITY #> function Set-StatusCakeHelperTest { [CmdletBinding(PositionalBinding=$false,SupportsShouldProcess=$true)] Param( $baseTestURL = "https://app.statuscake.com/API/Tests/Update", [Parameter(Mandatory=$true)] $Username, [Parameter(Mandatory=$true)] $ApiKey, [Parameter(Mandatory=$true)] [int]$TestID, #Optional parameters [ValidateNotNullOrEmpty()] $TestName, [ValidatePattern('^((http|https):\/\/)?([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] $TestURL, [ValidateRange(0,24000)] $CheckRate, [ValidateSet("HTTP","TCP","PING")] [String]$TestType, [ValidatePattern('^\d{1,}$')] $ContactGroup, [object]$TestTags, [ValidatePattern('^\d{2,}$')] $Port, [object]$NodeLocations, [ValidateRange(0,1)] $Paused, [ValidateRange(5,100)] $Timeout, [ValidatePattern('^((http|https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] $PingURL, [hashtable]$CustomHeader, [ValidateRange(0,10)] $Confirmation, [ValidatePattern('^([a-zA-Z0-9]{2,}\.[a-zA-Z]{2,})(\.[a-zA-Z]{2,})?|^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] [string]$DNSServer, [ValidatePattern('^(?!^.*,$)((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))*$')] [string]$DNSIP, [string]$BasicUser, [securestring]$BasicPass, [ValidateRange(0,1)] $Public, [ValidatePattern('^((http|https):\/\/)([a-zA-Z0-9\-]+(\.[a-zA-Z]+)+.*)$|^(?!^.*,$)')] $LogoImage, [ValidateRange(0,1)] $UseJar, [ValidateRange(0,1)] $Branding, [string]$WebsiteHost, [ValidateRange(0,1)] $Virus, [string]$FindString, [ValidateRange(0,1)] $DoNotFind, [ValidateRange(0,1)] $RealBrowser, [ValidateRange(0,60)] $TriggerRate, [object]$StatusCodes, [ValidateRange(0,1)] $EnableSSLWarning, [ValidateRange(0,1)] $FollowRedirect ) $authenticationHeader = @{"Username"="$username";"API"="$ApiKey"} $testCheck = Get-StatusCakeHelperTest -Username $username -apikey $ApiKey -TestID $TestID if(!$testCheck) { $result = [PSCustomObject]@{"Success" = "False";"Message" = "No Test with Specified ID Exists";"Data" = $testCheck;"InsertID" = -1} Return $result } $psParams = @{} $ParameterList = (Get-Command -Name $MyInvocation.InvocationName).Parameters $ParamsToIgnore = @("baseTestURL","Username","ApiKey") foreach ($key in $ParameterList.keys) { $var = Get-Variable -Name $key -ErrorAction SilentlyContinue; if($ParamsToIgnore -contains $var.Name) { continue } elseif($var.value -or $var.value -eq 0) { #Validate Range accepts $true or $false values as 0 or 1 so explictly convert to int for StatusCake API $psParams.Add($var.name,$var.value) } } $statusCakeAPIParams = $psParams | ConvertTo-StatusCakeHelperAPIParams if($statusCakeAPIParams.BasicPass) { $Credentials = New-Object System.Management.Automation.PSCredential -ArgumentList $statusCakeAPIParams.BasicUser, $statusCakeAPIParams.BasicPass $statusCakeAPIParams.BasicPass = $Credentials.GetNetworkCredential().Password } $putRequestParams = @{ uri = $baseTestURL Headers = $authenticationHeader UseBasicParsing = $true method = "Put" ContentType = "application/x-www-form-urlencoded" body = $statusCakeAPIParams } if( $pscmdlet.ShouldProcess("TestID - $($testCheck.TestID), TestURL - $($testCheck.WebsiteName)", "Update StatusCake Test") ) { $jsonResponse = Invoke-WebRequest @putRequestParams $response = $jsonResponse | ConvertFrom-Json if($response.Success -ne "True") { Write-Error "$($response.Message)" } Return $response } } |