Public/Invoke-PsExec.ps1
|
function Invoke-PsExec { [CmdletBinding(DefaultParameterSetName = 'Command')] param( [Parameter(ParameterSetName = 'Command', Mandatory = $true, Position = 0)] [ValidateNotNullOrEmpty()] [String] $Command, [Parameter(ParameterSetName = 'PSScriptFile', Mandatory = $true)] [String] $ScriptFile, [Parameter(Mandatory = $false, Position = 1, ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true, ValueFromRemainingArguments = $true)] [String[]] $ComputerName = $env:COMPUTERNAME, # Working directory to use on the remote system [String] $WorkingDirectory, # Copy file to remote system (-c). Note that if this is specified, a full path in the Command paramer will be interpreted by PSExec as a local path (to a file that should be copied) rather than a path on the remote device. [Parameter(Mandatory = $false)] [Switch] $Copy, # Allow the process to interact with the logged-in user (note that this can prevent console output from being returned correctly) [Parameter(Mandatory = $false)] [Switch] $Interactive, # Invoke the command as the SYSTEM account [Parameter(Mandatory = $false)] [Switch] $System, # Load the user's profile [Parameter(Mandatory = $false)] [Switch] $LoadProfile, # Wait for the process to complete [Parameter(Mandatory = $false)] [Switch] $Wait, # Credentials to use for the remote command. Recent versions of PSExec will encrypt credentials sent over the network. [Parameter(Mandatory = $false)] [pscredential] $Credential, # Seconds to wait for PSExec before timing out. Default is 1800 (30 minutes). [Parameter(Mandatory = $false)] [Int] $TimeoutSeconds = 1800, # Path to PSExec.exe [Parameter(Mandatory = $false)] [ValidateScript({(Test-Path $_)})] [String] $PsExecPath ) begin { $oldDebugPreference = $null if (-not $PSBoundParameters.ContainsKey('Debug')) { if ($DebugPreference -eq 'Inquire') { $oldDebugPreference = $DebugPreference $DebugPreference = 'Continue' } } if (-not $PsExecPath) { $PsExecPath = Get-Command -Name 'psexec' -CommandType Application -ErrorAction SilentlyContinue | Select-Object -First 1 -ExpandProperty Definition -ErrorAction SilentlyContinue if ([String]::IsNullOrEmpty($PsExecPath)) { Write-Debug "[Invoke-PsExec] PSExec.exe was not found. Throwing exception." throw "Unable to locate PSExec.exe. Place this file in the working directory [$PWD] or in the PATH variable, or specify it via the -PsExecPath parameter." } Write-Debug "[Invoke-PsExec] Using PSExec at path $PsExecPath" } # ProcessStartInfo uses ms instead of seconds $timeoutMilliseconds = $TimeoutSeconds * 1000 $args = New-Object -TypeName System.Text.StringBuilder -ArgumentList '-accepteula ' # [void] $args.Append("-accepteula \\{0}") # Computer name will go here if ($ComputerName) { [void] $args.Append('\\{0} ') } # Timeout after 30 seconds. This shouldn't be an issue since we're already using Test-Connection, but it's a good safeguard. # Also note the space at the end. This leads into the switch statement below. [void] $args.Append('-n 30 ') if ($Credential -and $Credential -ne [System.Management.Automation.PSCredential]::Empty) { Write-Debug "[Invoke-PsExec] Adding credentials for $($Credential.UserName)" [void] $args.AppendFormat('-u {0} -p {1} ', $Credential.UserName, $Credential.GetNetworkCredential().Password) } if ($WorkingDirectory) { [void] $args.Append("-w ""$WorkingDirectory"" ") } if ($Copy) { [void] $args.Append('-c -f ') } if (-not $Wait) { [void] $args.Append('-d ') } if (-not $LoadProfile) { [void] $args.Append('-e ') } if ($Interactive) { [void] $args.Append('-i ') } if ($System) { [void] $args.Append('-s ') } switch ($PSCmdlet.ParameterSetName) { 'Command' { # Escape any quotes in the command # $commandEscaped = $Command.Replace('"', '""') # [void] $args.Append("cmd /c `"$commandEscaped`"") if (-not $Copy) { [void] $args.Append("cmd /c $Command") } else { # If we're copying the file, we can't use the cmd /c prefix, because the file path will be a path to a local file instead of a remote one. [void] $args.Append("$Command") } } 'PSScriptFile' { $remoteTempFilename = 'psexecTemp.ps1' # Apparently we need to pipe some data into STDIN in order to get PSExec to exit properly # More details here: http://www.leeholmes.com/blog/2007/10/02/using-powershell-and-psexec-to-invoke-expressions-on-remote-computers/ [void] $args.Append("cmd /c `"echo . | powershell.exe -NoProfile -ExecutionPolicy Bypass -File '$env:SystemRoot\$remoteTempFilename'`"") } default { Write-Warning "Invoke-PsExec error: Unhandled parameter set name $($PSCmdlet.ParameterSetName)" } } $psExecArguments = $args.ToString() } process { foreach ($c in $ComputerName) { $fixedComputerName = $null if ($c -eq $env:COMPUTERNAME) { # Remove computer name argument for running on localhost $thisArgs = $psExecArguments.Replace(' \\{0}', '') } else { # Check for FQDN or CN. Apparently, PSExec returns output differently between the two, but you can "trick" it into redirecting normally if you add a dot (.) to the end of a CN. # # See this question for details: http://superuser.com/a/1038787 if ($c -notmatch '\.') { $fixedComputerName = "$c." } else { $fixedComputerName = $c } Write-Debug "[Invoke-PsExec] Processing computer name: [$fixedComputerName]" $thisArgs = $psExecArguments.Replace('{0}', $fixedComputerName) } if ($PSVersionTable.PSVersion.Major -gt 2) { $props = [Ordered] @{ ComputerName = $c Ping = $false Success = $false ExitCode = -1 StandardOut = "" StandardError = "" } } else { $props = @{ ComputerName = $c Ping = $false Success = $false ExitCode = -1 StandardOut = "" StandardError = "" } } if ((-not $fixedComputerName) -or (Test-Connection -ComputerName $fixedComputerName -BufferSize 16 -Count 2 -Quiet)) { $props.Ping = $true Write-Debug "[Invoke-PsExec] Arguments for PSExec on this computer: [$thisArgs]" if ($PSCmdlet.ParameterSetName -eq 'PSScriptFile') { $remoteScriptFile = Join-Path -Path "\\$c\admin`$" -ChildPath $remoteTempFilename Write-Debug "[Invoke-PsExec] Copying script file to path [$remoteScriptFile]" Copy-Item -Path $ScriptFile -Destination $remoteScriptFile -Force } elseif ($Copy) { } # We're using System.Diagnostics.Process instead of Start-Process due to the way Start-Process handles output redirection. (Spoilers: It doesn't.) $pInfo = New-Object -TypeName System.Diagnostics.ProcessStartInfo # $pInfo.FileName = 'cmd.exe' $pInfo.FileName = $PsExecPath $pInfo.RedirectStandardOutput = $true $pInfo.RedirectStandardError = $true $pInfo.UseShellExecute = $false # $pInfo.Arguments = "/c $PsExecPath $thisArgs" $pInfo.Arguments = $thisArgs $p = New-Object -TypeName System.Diagnostics.Process $p.StartInfo = $pInfo # Write-Verbose "Invoking PSExec on computer $c" Write-Debug "[Invoke-PsExec] Starting PSExec" try { [void] $p.Start() $stdOut = $p.StandardOutput.ReadToEndAsync() $stdErr = $p.StandardError.ReadToEndAsync() $hasExited = $p.WaitForExit($timeoutMilliseconds) if (-not $hasExited) { Write-Debug "[Invoke-PsExec] PsExec did not terminate in [$TimeoutSeconds] seconds; forcibly closing process" $p.Kill() } # [void] $stdOut.Wait() # [void] $stdErr.Wait() $exitCode = $p.ExitCode Write-Debug "PSExec exited with code $exitCode" $props.ExitCode = $exitCode if ($p.ExitCode -eq 0) { $props.Success = $true } $props.StandardOut = "$($stdOut.Result)".Trim() $props.StandardError = "$($stdErr.Result)".Trim() } catch { Write-Verbose "PSExec encountered an exception: $_" $props.StandardError = "$_" } finally { if ($PSCmdlet.ParameterSetName -eq 'PSScriptFile') { Write-Debug "[Invoke-PSExec] Removing temporary script file" Remove-Item -Path $remoteScriptFile -Force } } } else { Write-Verbose "Unable to connect to computer [$fixedComputerName]" } $obj = New-Object -TypeName PSCustomObject -Property $props $obj.PSTypeNames.Insert(0, 'Invoke-PsExec.Result') Write-Output $obj } } end { if ($oldDebugPreference) { $DebugPreference = $oldDebugPreference } } } |