public/Task.ps1
|
function Task { <# .SYNOPSIS Defines a build task to be executed by psake .DESCRIPTION This function creates a 'task' object that will be used by the psake engine to execute a build task. Note: There must be at least one task called 'default' in the build script .PARAMETER name The name of the task .PARAMETER action A scriptblock containing the statements to execute for the task. .PARAMETER preaction A scriptblock to be executed before the 'Action' scriptblock. Note: This parameter is ignored if the 'Action' scriptblock is not defined. .PARAMETER postaction A scriptblock to be executed after the 'Action' scriptblock. Note: This parameter is ignored if the 'Action' scriptblock is not defined. .PARAMETER precondition A scriptblock that is executed to determine if the task is executed or skipped. This scriptblock should return $true or $false .PARAMETER postcondition A scriptblock that is executed to determine if the task completed its job correctly. An exception is thrown if the scriptblock returns $false. .PARAMETER continueOnError If this switch parameter is set then the task will not cause the build to fail when an exception is thrown by the task .PARAMETER depends An array of task names that this task depends on. These tasks will be executed before the current task is executed. .PARAMETER requiredVariables An array of names of variables that must be set to run this task. .PARAMETER description A description of the task. .PARAMETER alias An alternate name for the task. .PARAMETER FromModule Load in the task from the specified PowerShell module. .PARAMETER requiredVersion The specific version of a module to load the task from .PARAMETER minimumVersion The minimum (inclusive) version of the PowerShell module to load in the task from. .PARAMETER maximumVersion The maximum (inclusive) version of the PowerShell module to load in the task from. .PARAMETER lessThanVersion The version of the PowerShell module to load in the task from that should not be met or exceeded. eg -lessThanVersion 2.0.0 will reject anything 2.0.0 or higher, allowing any module in the 1.x.x series. .EXAMPLE A sample build script is shown below: Task default -Depends Test Task Test -Depends Compile, Clean { "This is a test" } Task Compile -Depends Clean { "Compile" } Task Clean { "Clean" } The 'default' task is required and should not contain an 'Action' parameter. It uses the 'Depends' parameter to specify that 'Test' is a dependency The 'Test' task uses the 'Depends' parameter to specify that 'Compile' and 'Clean' are dependencies The 'Compile' task depends on the 'Clean' task. Note: The 'Action' parameter is defaulted to the script block following the 'Clean' task. An equivalent 'Test' task is shown below: Task Test -Depends Compile, Clean -Action { $testMessage } The output for the above sample build script is shown below: Executing task, Clean... Clean Executing task, Compile... Compile Executing task, Test... This is a test Build Succeeded! ---------------------------------------------------------------------- Build Time Report ---------------------------------------------------------------------- Name Duration ---- -------- Clean 00:00:00.0065614 Compile 00:00:00.0133268 Test 00:00:00.0225964 Total: 00:00:00.0782496 .LINK Assert .LINK Exec .LINK FormatTaskName .LINK Framework .LINK Get-PSakeScriptTasks .LINK Include .LINK Invoke-psake .LINK Properties .LINK TaskSetup .LINK TaskTearDown #> [CmdletBinding(DefaultParameterSetName = 'Normal')] param( [Parameter(Mandatory = $true, Position = 0)] [string]$name, [Parameter(Position = 1)] [scriptblock]$action = $null, [Parameter(Position = 2)] [scriptblock]$preaction = $null, [Parameter(Position = 3)] [scriptblock]$postaction = $null, [Parameter(Position = 4)] [scriptblock]$precondition = {$true}, [Parameter(Position = 5)] [scriptblock]$postcondition = {$true}, [Parameter(Position = 6)] [switch]$continueOnError, [ValidateNotNull()] [Parameter(Position = 7)] [string[]]$depends = @(), [ValidateNotNull()] [Parameter(Position = 8)] [string[]]$requiredVariables = @(), [Parameter(Position = 9)] [string]$description = $null, [Parameter(Position = 10)] [string]$alias = $null, [parameter(Mandatory = $true, ParameterSetName = 'SharedTask', Position = 11)] [ValidateNotNullOrEmpty()] [string]$FromModule, [Alias('Version')] [parameter(ParameterSetName = 'SharedTask', Position = 12)] [string]$requiredVersion, [parameter(ParameterSetName = 'SharedTask', Position = 13)] [string]$minimumVersion, [parameter(ParameterSetName = 'SharedTask', Position = 14)] [string]$maximumVersion, [parameter(ParameterSetName = 'SharedTask', Position = 15)] [string]$lessThanVersion ) function CreateTask { @{ Name = $Name DependsOn = $depends PreAction = $preaction Action = $action PostAction = $postaction Precondition = $precondition Postcondition = $postcondition ContinueOnError = $continueOnError Description = $description Duration = [System.TimeSpan]::Zero RequiredVariables = $requiredVariables Alias = $alias Success = $true # let's be optimistic ErrorMessage = $null ErrorDetail = $null ErrorFormatted = $null } } # Default tasks have no action if ($name -eq 'default') { Assert (!$action) ($msgs.error_shared_task_cannot_have_action) } # Shared tasks have no action if ($PSCmdlet.ParameterSetName -eq 'SharedTask') { Assert (!$action) ($msgs.error_shared_task_cannot_have_action -f $Name, $FromModule) } $currentContext = $psake.context.Peek() # Dot source the shared task module to load in its tasks if ($PSCmdlet.ParameterSetName -eq 'SharedTask') { $testModuleParams = @{ minimumVersion = $minimumVersion maximumVersion = $maximumVersion lessThanVersion = $lessThanVersion } if(![string]::IsNullOrEmpty($requiredVersion)){ $testModuleParams.minimumVersion = $requiredVersion $testModuleParams.maximumVersion = $requiredVersion } if ($taskModule = Get-Module -Name $FromModule) { # Use the task module that is already loaded into the session $testModuleParams.currentVersion = $taskModule.Version $taskModule = Where-Object -InputObject $taskModule -FilterScript {Test-ModuleVersion @testModuleParams} } else { # Find the module $getModuleParams = @{ ListAvailable = $true Name = $FromModule ErrorAction = 'Ignore' Verbose = $false } $taskModule = Get-Module @getModuleParams | Where-Object -FilterScript {Test-ModuleVersion -currentVersion $_.Version @testModuleParams} | Sort-Object -Property Version -Descending | Select-Object -First 1 } # This task references a task from a module # This reference task "could" include extra data about the task such as # additional dependOn, aliase, etc. # Store this task to the side so after we load the real task, we can combine # this extra data if nesessary $referenceTask = CreateTask Assert (-not $psake.ReferenceTasks.ContainsKey($referenceTask.Name)) ($msgs.error_duplicate_task_name -f $referenceTask.Name) $referenceTaskKey = $referenceTask.Name.ToLower() $psake.ReferenceTasks.Add($referenceTaskKey, $referenceTask) # Load in tasks from shared module into staging area Assert ($null -ne $taskModule) ($msgs.error_unknown_module -f $FromModule) $psakeFilePath = Join-Path -Path $taskModule.ModuleBase -ChildPath 'psakeFile.ps1' if (-not $psake.LoadedTaskModules.ContainsKey($psakeFilePath)) { Write-Debug -Message "Loading tasks from task module [$psakeFilePath]" . $psakeFilePath $psake.LoadedTaskModules.Add($psakeFilePath, $null) } } else { # Create new task object $newTask = CreateTask $taskKey = $newTask.Name.ToLower() # If this task was referenced from a parent build script # check to see if that reference task has extra data to add $refTask = $psake.ReferenceTasks.$taskKey if ($refTask) { # Override the preaction if ($refTask.PreAction -ne $newTask.PreAction) { $newTask.PreAction = $refTask.PreAction } # Override the postaction if ($refTask.PostAction -ne $newTask.PostAction) { $newTask.PostAction = $refTask.PostAction } # Override the precondition if ($refTask.PreCondition -ne $newTask.PreCondition) { $newTask.PreCondition = $refTask.PreCondition } # Override the postcondition if ($refTask.PostCondition -ne $newTask.PostCondition) { $newTask.PostCondition = $refTask.PostCondition } # Override the continueOnError if ($refTask.ContinueOnError) { $newTask.ContinueOnError = $refTask.ContinueOnError } # Override the depends if ($refTask.DependsOn.Count -gt 0 -and (Compare-Object -ReferenceObject $refTask.DependsOn -DifferenceObject $newTask.DependsOn)) { $newTask.DependsOn = $refTask.DependsOn } # Override the requiredVariables if ($refTask.RequiredVariables.Count -gt 0 -and (Compare-Object -ReferenceObject.RequiredVariables -DifferenceObject $newTask.RequiredVariables)) { $newTask.RequiredVariables += $refTask.RequiredVariables } } # Add the task to the context Assert (-not $currentContext.tasks.ContainsKey($taskKey)) ($msgs.error_duplicate_task_name -f $taskKey) Write-Debug "Adding task [$taskKey)]" $currentContext.tasks.$taskKey = $newTask if ($alias) { $aliasKey = $alias.ToLower() Assert (-not $currentContext.aliases.ContainsKey($aliasKey)) ($msgs.error_duplicate_alias_name -f $alias) $currentContext.aliases.$aliasKey = $newTask } } } |