functions/Copy-DbaStartupProcedure.ps1
|
function Copy-DbaStartupProcedure { <# .SYNOPSIS Copy-DbaStartupProcedure migrates startup procedures (user defined procedures within master database) from one SQL Server to another. .DESCRIPTION By default, all procedures found flagged as startup procedures are copied and then set as a startup procedure on the destination instance. The -Procedure parameter is auto-populated for command-line completion and can be used to copy only specific startup procedures. If the procedure already exists on the destination, it will be skipped unless -Force is used. .PARAMETER Source Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher. .PARAMETER SourceSqlCredential Login to the target instance using alternative credentials. Accepts PowerShell credentials (Get-Credential). Windows Authentication, SQL Server Authentication, Active Directory - Password, and Active Directory - Integrated are all supported. For MFA support, please use Connect-DbaInstance. .PARAMETER Destination Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher. .PARAMETER DestinationSqlCredential Login to the target instance using alternative credentials. Accepts PowerShell credentials (Get-Credential). Windows Authentication, SQL Server Authentication, Active Directory - Password, and Active Directory - Integrated are all supported. For MFA support, please use Connect-DbaInstance. .PARAMETER Procedure The startup procedure(s) to process. This list is auto-populated from the server. If unspecified, all startup procedures will be processed. .PARAMETER ExcludeProcedure The startup procedure(s) to exclude. This list is auto-populated from the server. .PARAMETER WhatIf If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run. .PARAMETER Confirm If this switch is enabled, you will be prompted for confirmation before executing any operations that change state. .PARAMETER EnableException By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting. Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch. .PARAMETER Force If this switch is enabled, the custom error will be dropped and recreated if it already exists on Destination. .NOTES Tags: Migration, Procedure, Startup, StartupProcedure Author: Shawn Melton (@wsmelton), http://wsmelton.github.io Website: https://dbatools.io Copyright: (c) 2018 by dbatools, licensed under MIT License: MIT https://opensource.org/licenses/MIT .LINK https://dbatools.io/Copy-DbaStartupProcedure .EXAMPLE PS C:\> Copy-DbaStartupProcedure -Source sqlserver2014a -Destination sqlcluster Copies all startup procedures from sqlserver2014a to sqlcluster using Windows credentials. If procedure(s) with the same name exists in the master database on sqlcluster, they will be skipped. .EXAMPLE PS C:\> Copy-DbaStartupProcedure -Source sqlserver2014a -SourceSqlCredential $scred -Destination sqlcluster -DestinationSqlCredential $dcred -Procedure logstartup -Force Copies only the startup procedure, logstartup, from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If the procedure already exists on sqlcluster, it will be updated because -Force was used. .EXAMPLE PS C:\> Copy-DbaStartupProcedure -Source sqlserver2014a -Destination sqlcluster -ExcludeProcedure logstartup -Force Copies all the startup procedures found on sqlserver2014a except logstartup to sqlcluster. If a startup procedure with the same name exists on sqlcluster, it will be updated because -Force was used. .EXAMPLE PS C:\> Copy-DbaStartupProcedure -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force Shows what would happen if the command were executed using force. #> [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess, ConfirmImpact = "Medium")] param ( [parameter(Mandatory)] [DbaInstanceParameter]$Source, [PSCredential]$SourceSqlCredential, [parameter(Mandatory)] [DbaInstanceParameter[]]$Destination, [PSCredential]$DestinationSqlCredential, [string[]]$Procedure, [string[]]$ExcludeProcedure, [switch]$Force, [switch]$EnableException ) begin { try { $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 9 } catch { Stop-Function -Message "Error occurred while establishing connection to $Source" -Category ConnectionError -ErrorRecord $_ -Target $Source return } # Includes properties: Name, Schema (both as strings) $startupProcs = Get-DbaModule -SqlInstance $sourceServer -Type StoredProcedure -Database master | Where-Object ExecIsStartup if ($Force) { $ConfirmPreference = 'none' } } process { if (Test-FunctionInterrupt) { return } foreach ($destInstance in $Destination) { try { $destServer = Connect-SqlInstance -SqlInstance $destInstance -SqlCredential $DestinationSqlCredential -MinimumVersion 9 } catch { Stop-Function -Message "Error occurred while establishing connection to $instance" -Category ConnectionError -ErrorRecord $_ -Target $destInstance -Continue } $destStartupProcs = Get-DbaModule -SqlInstance $destServer -Type StoredProcedure -Database master foreach ($currentProc in $startupProcs) { $currentProcName = $currentProc.Name $currentProcSchema = $currentProc.SchemaName $currentProcFullName = "$currentProcSchema.$currentProcName" $copyStartupProcStatus = [PSCustomObject]@{ SourceServer = $sourceServer.Name DestinationServer = $destServer.Name Name = $currentProcName Schema = $currentProcSchema Status = $null Notes = $null Type = "Startup Stored Procedure" DateTime = [DbaDateTime](Get-Date) } if ($Procedure -and ($Procedure -notcontains $currentProcName)) { continue } if ($ExcludeProcedure -and ($ExcludeProcedure -contains $currentProcName)) { continue } if ($destStartupProcs.Name -contains $currentProcName) { if ($force -eq $false) { $copyStartupProcStatus.Status = "Skipped" $copyStartupProcStatus.Notes = "Already exists on destination" $copyStartupProcStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject Write-Message -Level Verbose -Message "Startup procedure $currentProcFullName exists at destination. Use -Force to drop and migrate." continue } else { if ($Pscmdlet.ShouldProcess($destInstance, "Dropping startup procedure $currentProcFullName and recreating")) { try { Write-Message -Level Verbose -Message "Dropping startup procedure $currentProcFullName" $destServer.Query("DROP PROCEDURE [$($currentProcSchema)].[$($currentProcName)]") } catch { $copyStartupProcStatus.Status = "Failed" $copyStartupProcStatus.Notes = $_ $copyStartupProcStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject Stop-Function -Message "Issue dropping startup procedure" -Target $currentProcFullName -ErrorRecord $_ -Continue } } } } if ($Pscmdlet.ShouldProcess($destInstance, "Creating startup procedure $currentProcFullName")) { try { Write-Message -Level Verbose -Message "Copying startup procedure $currentProcFullName" $sp = $sourceServer.Databases['master'].StoredProcedures.Item($currentProcName, $currentProcSchema) $header = $sp.TextHeader $body = $sp.TextBody $sql = $header + $body Write-Message -Level Verbose -Message $sql $null = Invoke-DbaQuery -SqlInstance $destServer -Query $sql -Database master -EnableException $startupSql = "EXEC SP_PROCOPTION '$currentProcName', 'STARTUP', 'ON'" Write-Message -Level Verbose -Message $startupSql $null = Invoke-DbaQuery -SqlInstance $destServer -Query $startupSql -Database master -EnableException $copyStartupProcStatus.Status = "Successful" $copyStartupProcStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject } catch { $copyStartupProcStatus.Status = "Failed" $copyStartupProcStatus.Notes = $_ $copyStartupProcStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject } } } } } } |