functions/Invoke-DbaAdvancedInstall.ps1
|
function Invoke-DbaAdvancedInstall { <# .SYNOPSIS Designed for internal use, implements parallel execution for Install-DbaInstance. .DESCRIPTION Invokes an install process for a single computer and restarts it if needed .PARAMETER ComputerName Target computer with SQL instance or instances. .PARAMETER Port After successful installation, changes SQL Server TCP port to this value. Overrides the port specified in -SqlInstance. .PARAMETER InstallationPath Path to setup.exe .PARAMETER ConfigurationPath Path to Configuration.ini on a local machine .PARAMETER ArgumentList Array of command line arguments for setup.exe .PARAMETER Version Canonic version of SQL Server, e.g. 10.50, 11.0 .PARAMETER InstanceName Instance name to be used for the installation .PARAMETER Configuration A hashtable with custom configuration items that you want to use during the installation. Overrides all other parameters. For example, to define a custom server collation you can use the following parameter: PS> Install-DbaInstance -Version 2017 -Configuration @{ SQLCOLLATION = 'Latin1_General_BIN' } Full list of parameters can be found here: https://docs.microsoft.com/en-us/sql/database-engine/install-windows/install-sql-server-from-the-command-prompt#Install .PARAMETER Restart Restart computer automatically after a successful installation of Sql Server and wait until it comes back online. Using this parameter is the only way to chain-install more than 1 instance, since every single patch will require a restart of said computer. .PARAMETER Credential Windows Credential with permission to log on to the remote server. Must be specified for any remote connection if installation media is located on a network folder. .PARAMETER Authentication Chooses an authentication protocol for remote connections. If the protocol fails to establish a connection Defaults: * CredSSP when -Credential is specified - due to the fact that repository Path is usually a network share and credentials need to be passed to the remote host to avoid the double-hop issue. * Default when -Credential is not specified. Will likely fail if a network path is specified. .PARAMETER PerformVolumeMaintenanceTasks Allow SQL Server service account to perform Volume Maintenance tasks. .PARAMETER SaveConfiguration Save installation configuration file in a custom location. Will not be preserved otherwise. .PARAMETER SaCredential Securely provide the password for the sa account when using mixed mode authentication. .PARAMETER WhatIf Shows what would happen if the command were to run. No actions are actually performed. .PARAMETER Confirm Prompts you for confirmation before executing any changing operations within the command. .PARAMETER EnableException By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting. Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch. .NOTES Tags: Instance, Update Website: https://dbatools.io Copyright: (c) 2018 by dbatools, licensed under MIT License: MIT https://opensource.org/licenses/MIT .LINK https://dbatools.io/Invoke-DbaAdvancedInstall .EXAMPLE PS C:\> Invoke-DbaAdvancedUpdate -ComputerName SQL1 -Action $actions Invokes update actions on SQL1 after restarting it. #> [CmdletBinding()] Param ( [string]$ComputerName, [string]$InstanceName, [nullable[int]]$Port, [string]$InstallationPath, [string]$ConfigurationPath, [string[]]$ArgumentList, [version]$Version, [hashtable]$Configuration, [bool]$Restart, [bool]$PerformVolumeMaintenanceTasks, [string]$SaveConfiguration, [ValidateSet('Default', 'Basic', 'Negotiate', 'NegotiateWithImplicitCredential', 'Credssp', 'Digest', 'Kerberos')] [string]$Authentication = 'Credssp', [pscredential]$Credential, [pscredential]$SaCredential, [switch]$EnableException ) Function Get-SqlInstallSummary { # Reads Summary.txt from the SQL Server Installation Log folder Param ( [DbaInstanceParameter]$ComputerName, [pscredential]$Credential, [parameter(Mandatory)] [version]$Version ) $getSummary = { Param ( [parameter(Mandatory)] [version]$Version ) $versionNumber = "$($Version.Major)$($Version.Minor)".Substring(0, 3) $rootPath = "$([System.Environment]::GetFolderPath("ProgramFiles"))\Microsoft SQL Server\$versionNumber\Setup Bootstrap\Log" $summaryPath = "$rootPath\Summary.txt" $output = [PSCustomObject]@{ Path = $null Content = $null ConfigurationFile = $null } if (Test-Path $summaryPath) { $output.Path = $summaryPath $output.Content = Get-Content -Path $summaryPath | Select-String "Exit Message" # get last folder created - that's our setup $lastLogFolder = Get-ChildItem -Path $rootPath -Directory | Sort-Object -Property Name -Descending | Select-Object -First 1 -ExpandProperty FullName if (Test-Path $lastLogFolder\ConfigurationFile.ini) { $output.ConfigurationFile = "$lastLogFolder\ConfigurationFile.ini" } return $output } } $params = @{ ComputerName = $ComputerName.ComputerName Credential = $Credential ScriptBlock = $getSummary ArgumentList = @($Version.ToString()) ErrorAction = 'Stop' Raw = $true } return Invoke-Command2 @params } $isLocalHost = ([DbaInstanceParameter]$ComputerName).IsLocalHost $output = [pscustomobject]@{ ComputerName = $ComputerName Version = $Version SACredential = $SaCredential Successful = $false Restarted = $false Configuration = $Configuration InstanceName = $InstanceName Installer = $InstallationPath Port = $Port Notes = @() ExitCode = $null Log = $null LogFile = $null ConfigurationFile = $null } $restartParams = @{ ComputerName = $ComputerName ErrorAction = 'Stop' For = 'WinRM' Wait = $true Force = $true } if ($Credential) { $restartParams.Credential = $Credential } $activity = "Installing SQL Server ($Version) components on $ComputerName" try { $restartNeeded = Test-PendingReboot -ComputerName $ComputerName -Credential $Credential } catch { $restartNeeded = $false Stop-Function -Message "Failed to get reboot status from $computer" -ErrorRecord $_ } if ($restartNeeded -and $Restart) { # Restart the computer prior to doing anything $msgPending = "Restarting computer $($ComputerName) due to pending restart" Write-ProgressHelper -ExcludePercent -Activity $activity -Message $msgPending Write-Message -Level Verbose $msgPending try { $null = Restart-Computer @restartParams $output.Restarted = $true } catch { Stop-Function -Message "Failed to restart computer" -ErrorRecord $_ } } # save config if needed if ($SaveConfiguration) { try { $null = Copy-Item $ConfigurationPath -Destination $SaveConfiguration -ErrorAction Stop } catch { $msg = "Could not save configuration file to $SaveConfiguration" Stop-Function -Message $msg -ErrorRecord $_ $output.Notes += $msg } } $connectionParams = @{ ComputerName = $ComputerName ErrorAction = "Stop" UseSSL = (Get-DbatoolsConfigValue -FullName 'PSRemoting.PsSession.UseSSL' -Fallback $false) } if ($Credential) { $connectionParams.Credential = $Credential } # need to figure out where to store the config file if ($isLocalHost) { $remoteConfig = $ConfigurationPath } else { try { Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Copying configuration file to $ComputerName" $session = New-PSSession @connectionParams $chosenPath = Invoke-Command -Session $session -ScriptBlock { (Get-Item ([System.IO.Path]::GetTempPath())).FullName } -ErrorAction Stop $remoteConfig = Join-DbaPath $chosenPath.TrimEnd('\') (Split-Path $ConfigurationPath -Leaf) Write-Message -Level Verbose -Message "Copying $($ConfigurationPath) to remote machine into $chosenPath" $null = Send-File -Path $ConfigurationPath -Destination $chosenPath -Session $session -ErrorAction Stop $session | Remove-PSSession } catch { Stop-Function -Message "Failed to copy file $($ConfigurationPath) to $remoteConfig on $($ComputerName), exiting" -ErrorRecord $_ return } } $installParams = $ArgumentList $installParams += "/CONFIGURATIONFILE=`"$remoteConfig`"" Write-Message -Level Verbose -Message "Setup starting from $($InstallationPath)" $execParams = @{ ComputerName = $ComputerName ErrorAction = 'Stop' Authentication = $Authentication } if ($Credential) { $execParams.Credential = $Credential } else { if (Test-Bound -Not Authentication) { # Use Default authentication instead of CredSSP when Authentication is not specified and Credential is null $execParams.Authentication = "Default" } } try { Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Installing SQL Server on $ComputerName from $InstallationPath" $installResult = Invoke-Program @execParams -Path $InstallationPath -ArgumentList $installParams -Fallback $output.ExitCode = $installResult.ExitCode # Get setup log summary contents try { $summary = Get-SqlInstallSummary -ComputerName $ComputerName -Credential $Credential -Version $Version $output.Log = $summary.Content $output.LogFile = $summary.Path $output.ConfigurationFile = $summary.ConfigurationFile } catch { Write-Message -Level Warning -Message "Could not get the contents of the summary file from $($ComputerName). 'Log' property will be empty" -ErrorRecord $_ } } catch { Stop-Function -Message "Installation failed" -ErrorRecord $_ $output.Notes += $_.Exception.Message return $output } finally { try { # Cleanup remote temp Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Cleaning up temporary files on $ComputerName" if (-not $isLocalHost) { $null = Invoke-Command2 @connectionParams -ScriptBlock { if ($args[0] -like '*\Configuration_*.ini' -and (Test-Path $args[0])) { Remove-Item -LiteralPath $args[0] -ErrorAction Stop } } -Raw -ArgumentList $remoteConfig } # cleanup local temp config file Remove-Item $ConfigurationPath } catch { Stop-Function -Message "Temp cleanup failed" -ErrorRecord $_ } } if ($installResult.Successful) { $output.Successful = $true } else { $msg = "Installation failed with exit code $($installResult.ExitCode). Expand 'Log' property to find more details." $output.Notes += $msg Stop-Function -Message $msg return $output } # perform volume maintenance tasks if requested if ($PerformVolumeMaintenanceTasks) { $null = Set-DbaPrivilege -ComputerName $ComputerName -Credential $Credential -Type IFI -EnableException:$EnableException } # change port after the installation if ($Port) { $null = Set-DbaTcpPort -SqlInstance "$($ComputerName)\$($InstanceName)" -Credential $Credential -Port $Port -EnableException:$EnableException -Confirm:$false try { $null = Restart-DbaService -ComputerName $ComputerName -InstanceName $InstanceName -Credential $Credential -Type Engine -Force -EnableException:$EnableException -Confirm:$false } catch { $output.Notes += "Port for $($ComputerName)\$($InstanceName) has been changed, but instance restart failed ($_). Restart of instance is necessary for the new settings to become effective." } } # restart if necessary try { $restartNeeded = Test-PendingReboot -ComputerName $ComputerName -Credential $Credential } catch { $restartNeeded = $false Stop-Function -Message "Failed to get reboot status from $($ComputerName)" -ErrorRecord $_ } if ($installResult.ExitCode -eq 3010 -or $restartNeeded) { if ($Restart) { # Restart the computer $restartMsg = "Restarting computer $($ComputerName) and waiting for it to come back online" Write-ProgressHelper -ExcludePercent -Activity $activity -Message $restartMsg Write-Message -Level Verbose -Message $restartMsg try { $null = Restart-Computer @restartParams $output.Restarted = $true } catch { Stop-Function -Message "Failed to restart computer $($ComputerName)" -ErrorRecord $_ -FunctionName Install-DbaInstance return $output } } else { $output.Notes += "Restart is required for computer $($ComputerName) to finish the installation of Sql Server version $Version" } } $output | Select-DefaultView -Property ComputerName, InstanceName, Version, Port, Successful, Restarted, Installer, ExitCode, LogFile, Notes Write-Progress -Activity $activity -Completed } |