internal/functions/New-DbaLogShippingSecondaryDatabase.ps1
|
function New-DbaLogShippingSecondaryDatabase { <# .SYNOPSIS New-DbaLogShippingSecondaryDatabase sets up a secondary databases for log shipping. .DESCRIPTION New-DbaLogShippingSecondaryDatabase sets up a secondary databases for log shipping. This is executed on the secondary server. .PARAMETER SqlInstance SQL Server instance. You must have sysadmin access and server version must be SQL Server version 2000 or greater. .PARAMETER SqlCredential Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential) .PARAMETER BufferCount The total number of buffers used by the backup or restore operation. The default is -1. .PARAMETER BlockSize The size, in bytes, that is used as the block size for the backup device. The default is -1. .PARAMETER DisconnectUsers If set to 1, users are disconnected from the secondary database when a restore operation is performed. Te default is 0. .PARAMETER HistoryRetention Is the length of time in minutes in which the history is retained. The default is 14420. .PARAMETER MaxTransferSize The size, in bytes, of the maximum input or output request which is issued by SQL Server to the backup device. .PARAMETER PrimaryServer The name of the primary instance of the Microsoft SQL Server Database Engine in the log shipping configuration. .PARAMETER PrimaryDatabase Is the name of the database on the primary server. .PARAMETER RestoreAll If set to 1, the secondary server restores all available transaction log backups when the restore job runs. The default is 1. .PARAMETER RestoreDelay The amount of time, in minutes, that the secondary server waits before restoring a given backup file. The default is 0. .PARAMETER RestoreMode The restore mode for the secondary database. The default is 0. 0 = Restore log with NORECOVERY. 1 = Restore log with STANDBY. .PARAMETER RestoreThreshold The number of minutes allowed to elapse between restore operations before an alert is generated. .PARAMETER SecondaryDatabase Is the name of the secondary database. .PARAMETER ThresholdAlert Is the alert to be raised when the backup threshold is exceeded. The default is 14420. .PARAMETER ThresholdAlertEnabled Specifies whether an alert is raised when backup_threshold is exceeded. .PARAMETER MonitorServer Is the name of the monitor server. The default is the name of the primary server. .PARAMETER MonitorCredential Allows you to login to enter a secure credential. This is only needed in combination with MonitorServerSecurityMode having either a 0 or 'sqlserver' value. To use: $scred = Get-Credential, then pass $scred object to the -MonitorCredential parameter. .PARAMETER MonitorServerSecurityMode The security mode used to connect to the monitor server. Allowed values are 0, "sqlserver", 1, "windows" The default is 1 or Windows. .PARAMETER WhatIf Shows what would happen if the command were to run. No actions are actually performed. .PARAMETER Confirm Prompts you for confirmation before executing any changing operations within the command. .PARAMETER EnableException By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting. Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch. .PARAMETER Force The force parameter will ignore some errors in the parameters and assume defaults. It will also remove the any present schedules with the same name for the specific job. .NOTES Author: Sander Stad (@sqlstad, sqlstad.nl) Website: https://dbatools.io Copyright: (c) 2018 by dbatools, licensed under MIT License: MIT https://opensource.org/licenses/MIT .EXAMPLE New-DbaLogShippingSecondaryDatabase -SqlInstance sql2 -SecondaryDatabase DB1_DR -PrimaryServer sql1 -PrimaryDatabase DB1 -RestoreDelay 0 -RestoreMode standby -DisconnectUsers -RestoreThreshold 45 -ThresholdAlertEnabled -HistoryRetention 14420 #> [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")] param ( [parameter(Mandatory)] [Alias("ServerInstance", "SqlServer")] [DbaInstanceParameter]$SqlInstance, [PSCredential]$SqlCredential, [int]$BufferCount = -1, [int]$BlockSize = -1, [switch]$DisconnectUsers, [int]$HistoryRetention = 14420, [int]$MaxTransferSize, [Parameter(Mandatory)] [ValidateNotNullOrEmpty()] [DbaInstanceParameter]$PrimaryServer, [PSCredential]$PrimarySqlCredential, [Parameter(Mandatory)] [ValidateNotNullOrEmpty()] [object]$PrimaryDatabase, [int]$RestoreAll = 1, [int]$RestoreDelay = 0, [ValidateSet(0, 'NoRecovery', 1, 'Standby')] [object]$RestoreMode = 0, [Parameter(Mandatory)] [ValidateNotNullOrEmpty()] [int]$RestoreThreshold, [Parameter(Mandatory)] [ValidateNotNullOrEmpty()] [object]$SecondaryDatabase, [int]$ThresholdAlert = 14420, [switch]$ThresholdAlertEnabled, [string]$MonitorServer, [ValidateSet(0, "sqlserver", 1, "windows")] [object]$MonitorServerSecurityMode = 1, [System.Management.Automation.PSCredential]$MonitorCredential, [Alias('Silent')] [switch]$EnableException, [switch]$Force ) # Try connecting to the instance try { $ServerSecondary = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential } catch { Stop-Function -Message "Error occurred while establishing connection to $instance" -Category ConnectionError -Target $SqlInstance -ErrorRecord $_ -Continue } # Try connecting to the instance try { $ServerPrimary = Connect-SqlInstance -SqlInstance $PrimaryServer -SqlCredential $PrimarySqlCredential } catch { Stop-Function -Message "Error occurred while establishing connection to $instance" -Category ConnectionError -Target $PrimaryServer -ErrorRecord $_ -Continue } # Check if the database is present on the primary sql server if ($ServerPrimary.Databases.Name -notcontains $PrimaryDatabase) { Stop-Function -Message "Database $PrimaryDatabase is not available on instance $PrimaryServer" -Target $PrimaryServer -Continue } # Check if the database is present on the primary sql server if ($ServerSecondary.Databases.Name -notcontains $SecondaryDatabase) { Stop-Function -Message "Database $SecondaryDatabase is not available on instance $ServerSecondary" -Target $SqlInstance -Continue } # Check the restore mode if ($RestoreMode -notin 0, 1) { $RestoreMode = switch ($RestoreMode) { "NoRecovery" { 0} "Standby" { 1 } } Write-Message -Message "Setting restore mode to $RestoreMode." -Level Verbose } # Check the if Threshold alert needs to be enabled if ($ThresholdAlertEnabled) { [int]$ThresholdAlertEnabled = 1 Write-Message -Message "Setting Threshold alert to $ThresholdAlertEnabled." -Level Verbose } else { [int]$ThresholdAlertEnabled = 0 Write-Message -Message "Setting Threshold alert to $ThresholdAlertEnabled." -Level Verbose } # Checking the option to disconnect users if ($DisconnectUsers) { [int]$DisconnectUsers = 1 Write-Message -Message "Setting disconnect users to $DisconnectUsers." -Level Verbose } else { [int]$DisconnectUsers = 0 Write-Message -Message "Setting disconnect users to $DisconnectUsers." -Level Verbose } # Check hte combination of the restore mode with the option to disconnect users if ($RestoreMode -eq 0 -and $DisconnectUsers -ne 0) { if ($Force) { [int]$DisconnectUsers = 0 Write-Message -Message "Illegal combination of database restore mode $RestoreMode and disconnect users $DisconnectUsers. Setting it to $DisconnectUsers." -Level Warning } else { Stop-Function -Message "Illegal combination of database restore mode $RestoreMode and disconnect users $DisconnectUsers." -Target $SqlInstance -Continue } } # Set up the query $Query = "EXEC master.sys.sp_add_log_shipping_secondary_database @secondary_database = '$SecondaryDatabase' ,@primary_server = '$PrimaryServer' ,@primary_database = '$PrimaryDatabase' ,@restore_delay = $RestoreDelay ,@restore_all = $RestoreAll ,@restore_mode = $RestoreMode ,@disconnect_users = $DisconnectUsers ,@restore_threshold = $RestoreThreshold ,@threshold_alert = $ThresholdAlert ,@threshold_alert_enabled = $ThresholdAlertEnabled ,@history_retention_period = $HistoryRetention " if ($ServerSecondary.Version.Major -le 12) { $Query += " ,@ignoreremotemonitor = 1" } # Add inf extra options to the query when needed if ($BlockSize -ne -1) { $Query += ",@block_size = $BlockSize" } if ($BufferCount -ne -1) { $Query += ",@buffer_count = $BufferCount" } if ($MaxTransferSize -ge 1) { $Query += ",@max_transfer_size = $MaxTransferSize" } if ($Force -and ($ServerSecondary.Version.Major -gt 9)) { $Query += ",@overwrite = 1;" } else { $Query += ";" } # Execute the query to add the log shipping primary if ($PSCmdlet.ShouldProcess($SqlServer, ("Configuring logshipping for secondary database $SecondaryDatabase on $SqlInstance"))) { try { Write-Message -Message "Configuring logshipping for secondary database $SecondaryDatabase on $SqlInstance." -Level Verbose Write-Message -Message "Executing query:`n$Query" -Level Verbose $ServerSecondary.Query($Query) # For versions prior to SQL Server 2014, adding a monitor works in a different way. # The next section makes sure the settings are being synchronized with earlier versions if ($MonitorServer -and ($SqlInstance.Version.Major -lt 12)) { # Get the details of the primary database $query = "SELECT * FROM msdb.dbo.log_shipping_monitor_secondary WHERE primary_database = '$PrimaryDatabase' AND primary_server = '$PrimaryServer'" $lsDetails = $ServerSecondary.Query($query) # Setup the procedure script for adding the monitor for the primary $query = "EXEC msdb.dbo.sp_processlogshippingmonitorsecondary @mode = $MonitorServerSecurityMode ,@secondary_server = '$SqlInstance' ,@secondary_database = '$SecondaryDatabase' ,@secondary_id = '$($lsDetails.secondary_id)' ,@primary_server = '$($lsDetails.primary_server)' ,@primary_database = '$($lsDetails.primary_database)' ,@restore_threshold = $($lsDetails.restore_threshold) ,@threshold_alert = $([int]$lsDetails.threshold_alert) ,@threshold_alert_enabled = $([int]$lsDetails.threshold_alert_enabled) ,@history_retention_period = $([int]$lsDetails.history_retention_period) ,@monitor_server = '$MonitorServer' ,@monitor_server_security_mode = $MonitorServerSecurityMode " # Check the MonitorServerSecurityMode if it's SQL Server authentication if ($MonitorServer -and $MonitorServerSecurityMode -eq 0 ) { $query += ",@monitor_server_login = N'$MonitorLogin' ,@monitor_server_password = N'$MonitorPassword' " } Write-Message -Message "Configuring monitor server for secondary database $SecondaryDatabase." -Level Verbose Write-Message -Message "Executing query:`n$query" -Level Verbose Invoke-DbaQuery -SqlInstance $MonitorServer -SqlCredential $MonitorCredential -Database msdb -Query $query $query = " UPDATE msdb.dbo.log_shipping_secondary SET monitor_server = '$MonitorServer', user_specified_monitor = 1 WHERE secondary_id = '$($lsDetails.secondary_id)' " Write-Message -Message "Updating monitor information for the secondary database $Database." -Level Verbose Write-Message -Message "Executing query:`n$query" -Level Verbose $ServerSecondary.Query($query) } } catch { Write-Message -Message "$($_.Exception.InnerException.InnerException.InnerException.InnerException.Message)" -Level Warning Stop-Function -Message "Error executing the query.`n$($_.Exception.Message)`n$Query" -ErrorRecord $_ -Target $SqlInstance -Continue } } Write-Message -Message "Finished adding the secondary database $SecondaryDatabase to log shipping." -Level Verbose } |