functions/Invoke-DbaDbMirroring.ps1
|
#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle# function Invoke-DbaDbMirroring { <# .SYNOPSIS Automates the creation of database mirrors. .DESCRIPTION Automates the creation of database mirrors. * Verifies that a mirror is possible * Sets the recovery model to Full if needed * If the database does not exist on mirror or witness, a backup/restore is performed * Sets up endpoints if necessary * Creates a login and grants permissions to service accounts if needed * Starts endpoints if needed * Sets up partner for mirror * Sets up partner for primary * Sets up witness if one is specified NOTE: If a backup / restore is performed, the backups will be left in tact on the network share. .PARAMETER Primary SQL Server name or SMO object representing the primary SQL Server. .PARAMETER PrimarySqlCredential Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential) .PARAMETER Mirror SQL Server name or SMO object representing the mirror SQL Server. .PARAMETER MirrorSqlCredential Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential) .PARAMETER Witness SQL Server name or SMO object representing the witness SQL Server. .PARAMETER WitnessSqlCredential Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential) .PARAMETER Database The database or databases to mirror. .PARAMETER SharedPath The network share where the backups will be backed up and restored from. Each SQL Server service account must have access to this share. NOTE: If a backup / restore is performed, the backups will be left in tact on the network share. .PARAMETER InputObject Enables piping from Get-DbaDatabase. .PARAMETER UseLastBackup Use the last full backup of database. .PARAMETER Force Drop and recreate the database on remote servers using fresh backup. .PARAMETER WhatIf Shows what would happen if the command were to run. No actions are actually performed. .PARAMETER Confirm Prompts you for confirmation before executing any changing operations within the command. .PARAMETER EnableException By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting. Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch. .NOTES Tags: Mirror, HA Author: Chrissy LeMaire (@cl), netnerds.net Website: https://dbatools.io Copyright: (c) 2018 by dbatools, licensed under MIT License: MIT https://opensource.org/licenses/MIT .LINK https://dbatools.io/Invoke-DbaDbMirroring .EXAMPLE PS C:\> $params = @{ >> Primary = 'sql2017a' >> Mirror = 'sql2017b' >> MirrorSqlCredential = 'sqladmin' >> Witness = 'sql2019' >> Database = 'pubs' >> SharedPath = '\\nas\sql\share' >> } >> PS C:\> Invoke-DbaDbMirroring @params Performs a bunch of checks to ensure the pubs database on sql2017a can be mirrored from sql2017a to sql2017b. Logs in to sql2019 and sql2017a using Windows credentials and sql2017b using a SQL credential. Prompts for confirmation for most changes. To avoid confirmation, use -Confirm:$false or use the syntax in the second example. .EXAMPLE PS C:\> $params = @{ >> Primary = 'sql2017a' >> Mirror = 'sql2017b' >> MirrorSqlCredential = 'sqladmin' >> Witness = 'sql2019' >> Database = 'pubs' >> SharedPath = '\\nas\sql\share' >> Force = $true >> Confirm = $false >> } >> PS C:\> Invoke-DbaDbMirroring @params Performs a bunch of checks to ensure the pubs database on sql2017a can be mirrored from sql2017a to sql2017b. Logs in to sql2019 and sql2017a using Windows credentials and sql2017b using a SQL credential. Drops existing pubs database on Mirror and Witness and restores them with a fresh backup. Does all the things in the decription, does not prompt for confirmation. .EXAMPLE PS C:\> $map = @{ 'database_data' = 'M:\Data\database_data.mdf' 'database_log' = 'L:\Log\database_log.ldf' } PS C:\> Get-ChildItem \\nas\seed | Restore-DbaDatabase -SqlInstance sql2017b -FileMapping $map -NoRecovery PS C:\> Get-DbaDatabase -SqlInstance sql2017a -Database pubs | Invoke-DbaDbMirroring -Mirror sql2017b -Confirm:$false Restores backups from sql2017a to a specific file struture on sql2017b then creates mirror with no prompts for confirmation. .EXAMPLE PS C:\> Get-DbaDatabase -SqlInstance sql2017a -Database pubs | >> Invoke-DbaDbMirroring -Mirror sql2017b -UseLastBackup -Confirm:$false Mirrors pubs on sql2017a to sql2017b and uses the last full and logs from sql2017a to seed. Doesn't prompt for confirmation. #> [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')] param ( [DbaInstanceParameter]$Primary, [PSCredential]$PrimarySqlCredential, [parameter(Mandatory)] [DbaInstanceParameter[]]$Mirror, [PSCredential]$MirrorSqlCredential, [DbaInstanceParameter]$Witness, [PSCredential]$WitnessSqlCredential, [string[]]$Database, [Alias("NetworkShare")] [string]$SharedPath, [parameter(ValueFromPipeline)] [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject, [switch]$UseLastBackup, [switch]$Force, [switch]$EnableException ) begin { Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter NetworkShare -CustomMessage "Using the parameter NetworkShare is deprecated. This parameter will be removed in version 1.0.0 or before. Use SharedPath instead." $params = $PSBoundParameters $null = $params.Remove('UseLastBackup') $null = $params.Remove('Force') $null = $params.Remove('Confirm') $null = $params.Remove('Whatif') } process { if ((Test-Bound -ParameterName Primary) -and (Test-Bound -Not -ParameterName Database)) { Stop-Function -Message "Database is required when Primary is specified" return } if ($Force -and (-not $SharedPath -and -not $UseLastBackup)) { Stop-Function -Message "SharedPath or UseLastBackup is required when Force is used" return } if ($Primary) { $InputObject += Get-DbaDatabase -SqlInstance $Primary -SqlCredential $PrimarySqlCredential -Database $Database } foreach ($primarydb in $InputObject) { $stepCounter = 0 $Primary = $source = $primarydb.Parent try { $dest = Connect-SqlInstance -SqlInstance $Mirror -SqlCredential $MirrorSqlCredential if ($Witness) { $witserver = Connect-SqlInstance -SqlInstance $Witness -SqlCredential $WitnessSqlCredential } } catch { Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue } $dbName = $primarydb.Name Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Validating mirror setup" # Thanks to https://github.com/mmessano/PowerShell/blob/master/SQL-ConfigureDatabaseMirroring.ps1 for the tips $validation = Invoke-DbMirrorValidation @params if ((Test-Bound -ParameterName SharedPath) -and -not $validation.AccessibleShare) { Stop-Function -Continue -Message "Cannot access $SharedPath from $($dest.Name)" } if (-not $validation.EditionMatch) { Stop-Function -Continue -Message "This mirroring configuration is not supported. Because the principal server instance, $source, is $($source.EngineEdition) Edition, the mirror server instance must also be $($source.EngineEdition) Edition." } if ($validation.MirroringStatus -ne "None") { Stop-Function -Continue -Message "Cannot setup mirroring on database ($dbname) due to its current mirroring state: $($primarydb.MirroringStatus)" } if ($primarydb.Status -ne "Normal") { Stop-Function -Continue -Message "Cannot setup mirroring on database ($dbname) due to its current state: $($primarydb.Status)" } Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting recovery model for $dbName on $($source.Name) to Full" if ($primarydb.RecoveryModel -ne "Full") { if ((Test-Bound -ParameterName UseLastBackup)) { Stop-Function -Continue -Message "$dbName not set to full recovery. UseLastBackup cannot be used." } else { Set-DbaDbRecoveryModel -SqlInstance $source -Database $primarydb.Name -RecoveryModel Full } } Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Copying $dbName from primary to mirror" if (-not $validation.DatabaseExistsOnMirror -or $Force) { if ($UseLastBackup) { $allbackups = Get-DbaBackupHistory -SqlInstance $primarydb.Parent -Database $primarydb.Name -IncludeCopyOnly -Last } else { if ($Force -or $Pscmdlet.ShouldProcess("$Primary", "Creating full and log backups of $primarydb on $SharedPath")) { $fullbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Full $logbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Log $allbackups = $fullbackup, $logbackup } } if ($Pscmdlet.ShouldProcess("$Mirror", "Restoring full and log backups of $primarydb from $Primary")) { foreach ($mirrorinstance in $Mirror) { try { $null = $allbackups | Restore-DbaDatabase -SqlInstance $mirrorinstance -SqlCredential $MirrorSqlCredential -WithReplace -NoRecovery -TrustDbBackupHistory -EnableException } catch { Stop-Function -Message "Failure" -ErrorRecord $_ -Target $dest -Continue } } } if ($SharedPath) { Write-Message -Level Verbose -Message "Backups still exist on $SharedPath" } } $mirrordb = Get-DbaDatabase -SqlInstance $dest -Database $dbName Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Copying $dbName from primary to witness" if ($Witness -and (-not $validation.DatabaseExistsOnWitness -or $Force)) { if (-not $allbackups) { if ($UseLastBackup) { $allbackups = Get-DbaBackupHistory -SqlInstance $primarydb.Parent -Database $primarydb.Name -IncludeCopyOnly -Last } else { if ($Force -or $Pscmdlet.ShouldProcess("$Primary", "Creating full and log backups of $primarydb on $SharedPath")) { $fullbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Full $logbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Log $allbackups = $fullbackup, $logbackup } } } if ($Pscmdlet.ShouldProcess("$Witness", "Restoring full and log backups of $primarydb from $Primary")) { try { $null = $allbackups | Restore-DbaDatabase -SqlInstance $Witness -SqlCredential $WitnessSqlCredential -WithReplace -NoRecovery -TrustDbBackupHistory -EnableException } catch { Stop-Function -Message "Failure" -ErrorRecord $_ -Target $witserver -Continue } } } $primaryendpoint = Get-DbaEndpoint -SqlInstance $source | Where-Object EndpointType -eq DatabaseMirroring $mirrorendpoint = Get-DbaEndpoint -SqlInstance $dest | Where-Object EndpointType -eq DatabaseMirroring if (-not $primaryendpoint) { Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up endpoint for primary" $primaryendpoint = New-DbaEndpoint -SqlInstance $source -Type DatabaseMirroring -Role Partner -Name Mirroring -EncryptionAlgorithm RC4 $null = $primaryendpoint | Stop-DbaEndpoint $null = $primaryendpoint | Start-DbaEndpoint } if (-not $mirrorendpoint) { Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up endpoint for mirror" $mirrorendpoint = New-DbaEndpoint -SqlInstance $dest -Type DatabaseMirroring -Role Partner -Name Mirroring -EncryptionAlgorithm RC4 $null = $mirrorendpoint | Stop-DbaEndpoint $null = $mirrorendpoint | Start-DbaEndpoint } if ($witserver) { Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up endpoint for witness" $witnessendpoint = Get-DbaEndpoint -SqlInstance $witserver | Where-Object EndpointType -eq DatabaseMirroring if (-not $witnessendpoint) { $witnessendpoint = New-DbaEndpoint -SqlInstance $witserver -Type DatabaseMirroring -Role Witness -Name Mirroring -EncryptionAlgorithm RC4 $null = $witnessendpoint | Stop-DbaEndpoint $null = $witnessendpoint | Start-DbaEndpoint } } Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Granting permissions to service account" $serviceaccounts = $source.ServiceAccount, $dest.ServiceAccount, $witserver.ServiceAccount | Select-Object -Unique foreach ($account in $serviceaccounts) { if ($Pscmdlet.ShouldProcess("primary, mirror and witness (if specified)", "Creating login $account and granting CONNECT ON ENDPOINT")) { $null = New-DbaLogin -SqlInstance $source -Login $account -WarningAction SilentlyContinue $null = New-DbaLogin -SqlInstance $dest -Login $account -WarningAction SilentlyContinue try { $null = $source.Query("GRANT CONNECT ON ENDPOINT::$primaryendpoint TO [$account]") $null = $dest.Query("GRANT CONNECT ON ENDPOINT::$mirrorendpoint TO [$account]") if ($witserver) { $null = New-DbaLogin -SqlInstance $witserver -Login $account -WarningAction SilentlyContinue $witserver.Query("GRANT CONNECT ON ENDPOINT::$witnessendpoint TO [$account]") } } catch { Stop-Function -Continue -Message "Failure" -ErrorRecord $_ } } } Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Starting endpoints if necessary" try { $null = $primaryendpoint, $mirrorendpoint, $witnessendpoint | Start-DbaEndpoint -EnableException } catch { Stop-Function -Continue -Message "Failure" -ErrorRecord $_ } try { Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up partner for mirror" $null = $mirrordb | Set-DbaDbMirror -Partner $primaryendpoint.Fqdn -EnableException } catch { Stop-Function -Continue -Message "Failure on mirror" -ErrorRecord $_ } try { Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up partner for primary" $null = $primarydb | Set-DbaDbMirror -Partner $mirrorendpoint.Fqdn -EnableException } catch { Stop-Function -Continue -Message "Failure on primary" -ErrorRecord $_ } try { if ($witnessendpoint) { $null = $primarydb | Set-DbaDbMirror -Witness $witnessendpoint.Fqdn -EnableException } } catch { Stop-Function -Continue -Message "Failure with the new last part" -ErrorRecord $_ } if ($Pscmdlet.ShouldProcess("console", "Showing results")) { $results = [pscustomobject]@{ Primary = $Primary Mirror = $Mirror -join ", " Witness = $Witness Database = $primarydb.Name Status = "Success" } if ($Witness) { $results | Select-DefaultView -Property Primary, Mirror, Witness, Database, Status } else { $results | Select-DefaultView -Property Primary, Mirror, Database, Status } } } } } |