functions/invoke-d365lcsupload.ps1
|
<# .SYNOPSIS Upload a file to a LCS project .DESCRIPTION Upload a file to a LCS project using the API provided by Microsoft .PARAMETER ProjectId The project id for the Dynamics 365 for Finance & Operations project inside LCS Default value can be configured using Set-D365LcsApiConfig .PARAMETER BearerToken The token you want to use when working against the LCS api Default value can be configured using Set-D365LcsApiConfig .PARAMETER FilePath Path to the file that you want to upload to the Asset Library on LCS .PARAMETER FileType Type of file you want to upload Valid options: "Model" "Process Data Package" "Software Deployable Package" "GER Configuration" "Data Package" "PowerBI Report Model" "E-Commerce Package" "NuGet Package" "Retail Self-Service Package" "Commerce Cloud Scale Unit Extension" Default value is "Software Deployable Package" .PARAMETER Name Name to be assigned / shown on LCS .PARAMETER Filename Filename to be assigned / shown on LCS Often will it require an extension for it to be accepted .PARAMETER FileDescription Description to be assigned / shown on LCS .PARAMETER LcsApiUri URI / URL to the LCS API you want to use Depending on whether your LCS project is located in europe or not, there is 2 valid URI's / URL's Valid options: "https://lcsapi.lcs.dynamics.com" "https://lcsapi.eu.lcs.dynamics.com" "https://lcsapi.fr.lcs.dynamics.com" "https://lcsapi.sa.lcs.dynamics.com" "https://lcsapi.uae.lcs.dynamics.com" "https://lcsapi.ch.lcs.dynamics.com" "https://lcsapi.lcs.dynamics.cn" "https://lcsapi.gov.lcs.microsoftdynamics.us" Default value can be configured using Set-D365LcsApiConfig .PARAMETER FailOnErrorMessage Instruct the cmdlet to write logging information to the console, if there is an error message in the response from the LCS endpoint Used in combination with either Enable-D365Exception cmdlet, or the -EnableException directly on this cmdlet, it will throw an exception and break/stop execution of the script This allows you to implement custom retry / error handling logic .PARAMETER RetryTimeout The retry timeout, before the cmdlet should quit retrying based on the 429 status code Needs to be provided in the timspan notation: "hh:mm:ss" hh is the number of hours, numerical notation only mm is the number of minutes ss is the numbers of seconds Each section of the timeout has to valid, e.g. hh can maximum be 23 mm can maximum be 59 ss can maximum be 59 Not setting this parameter will result in the cmdlet to try for ever to handle the 429 push back from the endpoint .PARAMETER EnableException This parameters disables user-friendly warnings and enables the throwing of exceptions This is less user friendly, but allows catching exceptions in calling scripts .EXAMPLE PS C:\> Invoke-D365LcsUpload -ProjectId 123456789 -BearerToken "Bearer JldjfafLJdfjlfsalfd..." -FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip" -FileType "SoftwareDeployablePackage" -Name "Release-2019-05-05" -Filename "Release-2019-05-05.zip" -FileDescription "Build based on sprint: SuperSprint-1" -LcsApiUri "https://lcsapi.lcs.dynamics.com" This will start the upload of a file to the Asset Library. The LCS project is identified by the ProjectId 123456789, which can be obtained in the LCS portal. The file that will be uploaded is based on the FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip". The file type "Software Deployable Package" determines where inside the Asset Library the file will end up. The name inside the Asset Library is based on the Name "Release-2019-05-05". The file name inside the Asset Library is based on the FileName "Release-2019-05-05.zip". The description inside the Asset Library is based on the FileDescription "Build based on sprint: SuperSprint-1". The request will authenticate with the BearerToken "Bearer JldjfafLJdfjlfsalfd...". The http request will be going to the LcsApiUri "https://lcsapi.lcs.dynamics.com" (NON-EUROPE). .EXAMPLE PS C:\> Invoke-D365LcsUpload -FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip" -FileType "SoftwareDeployablePackage" -FileName "Release-2019-05-05.zip" This will start the upload of a file to the Asset Library. The file that will be uploaded is based on the FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip". The file type "Software Deployable Package" determines where inside the Asset Library the file will end up. The file name inside the Asset Library is based on the FileName "Release-2019-05-05.zip". All default values will come from the configuration available from Get-D365LcsApiConfig. The default values can be configured using Set-D365LcsApiConfig. .EXAMPLE PS C:\> Invoke-D365LcsUpload -FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip" This will start the upload of a file to the Asset Library. The file that will be uploaded is based on the FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip". All default values will come from the configuration available from Get-D365LcsApiConfig. The default values can be configured using Set-D365LcsApiConfig. .EXAMPLE PS C:\> Invoke-D365LcsUpload -FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip" -RetryTimeout "00:01:00" This will start the upload of a file to the Asset Library through the LCS API, and allow for the cmdlet to retry for no more than 1 minute. The file that will be uploaded is based on the FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip". All default values will come from the configuration available from Get-D365LcsApiConfig. The default values can be configured using Set-D365LcsApiConfig. .LINK Get-D365LcsApiConfig .LINK Get-D365LcsApiToken .LINK Get-D365LcsAssetValidationStatus .LINK Get-D365LcsDeploymentStatus .LINK Invoke-D365LcsApiRefreshToken .LINK Invoke-D365LcsDeployment .LINK Set-D365LcsApiConfig .NOTES Tags: Environment, Url, Config, Configuration, LCS, Upload, Api, AAD, Token Author: Mötz Jensen (@Splaxi) #> function Invoke-D365LcsUpload { [CmdletBinding()] [OutputType()] param( [int]$ProjectId = $Script:LcsApiProjectId, [Alias('Token')] [string] $BearerToken = $Script:LcsApiBearerToken, [Parameter(Mandatory = $true)] [string] $FilePath, [LcsAssetFileType] $FileType = [LcsAssetFileType]::SoftwareDeployablePackage, [string] $Name, [string] $Filename, [string] $FileDescription, [string] $LcsApiUri = $Script:LcsApiLcsApiUri, [switch] $FailOnErrorMessage, [Timespan] $RetryTimeout = "00:00:00", [switch] $EnableException ) Invoke-TimeSignal -Start $fileNameExtracted = Split-Path $FilePath -Leaf if ($Filename -eq "") { $Filename = $fileNameExtracted } if ($Name -eq "") { $Name = [System.IO.Path]::GetFileNameWithoutExtension($FilePath) } if (-not ($BearerToken.StartsWith("Bearer "))) { $BearerToken = "Bearer $BearerToken" } $blobDetails = Start-LcsUploadV2 -Token $BearerToken -ProjectId $ProjectId -FileType $FileType -LcsApiUri $LcsApiUri -Name $Name -FileName $Filename -Description $FileDescription -RetryTimeout $RetryTimeout if (Test-PSFFunctionInterrupt) { return } if ($FailOnErrorMessage -and $blobDetails.ErrorMessage) { $messageString = "The request against LCS succeeded, but the response was an error message for the operation: <c='em'>$($blobDetails.ErrorMessage)</c>." $errorMessagePayload = "`r`n$($blobDetails | ConvertTo-Json)" Write-PSFMessage -Level Host -Message $messageString -Exception $([System.Exception]::new($($errorMessagePayload))) -Target $blobDetails Stop-PSFFunction -Message "Stopping because of errors." -Exception $([System.Exception]::new($($errorMessagePayload))) -Target $blobDetails } Write-PSFMessage -Level Verbose -Message "Start response" -Target $blobDetails $uploadResponse = Copy-FileToLcsBlob -FilePath $FilePath -FullUri $blobDetails.FileLocation if (Test-PSFFunctionInterrupt) { return } Write-PSFMessage -Level Verbose -Message "Upload response" -Target $uploadResponse $ackResponse = Complete-LcsUploadV2 -Token $BearerToken -ProjectId $ProjectId -AssetId $blobDetails.Id -LcsApiUri $LcsApiUri -RetryTimeout $RetryTimeout if (Test-PSFFunctionInterrupt) { return } if ($FailOnErrorMessage -and $ackResponse.ErrorMessage) { $messageString = "The request against LCS succeeded, but the response was an error message for the operation: <c='em'>$($ackResponse.ErrorMessage)</c>." $errorMessagePayload = "`r`n$($ackResponse | ConvertTo-Json)" Write-PSFMessage -Level Host -Message $messageString -Exception $([System.Exception]::new($($errorMessagePayload))) -Target $ackResponse Stop-PSFFunction -Message "Stopping because of errors." -Exception $([System.Exception]::new($($errorMessagePayload))) -Target $ackResponse } Write-PSFMessage -Level Verbose -Message "Commit response" -Target $ackResponse Invoke-TimeSignal -End [PSCustomObject]@{ AssetId = $blobDetails.Id Name = $Name Filename = $Filename } } |