functions/invoke-d365lcsenvironmentstart.ps1
|
<# .SYNOPSIS Start a specified environment through LCS. .DESCRIPTION Start a specified IAAS environment that is Customer Managed through the LCS API. .PARAMETER ProjectId The project id for the Dynamics 365 for Finance & Operations project inside LCS Default value can be configured using Set-D365LcsApiConfig .PARAMETER BearerToken The token you want to use when working against the LCS api Default value can be configured using Set-D365LcsApiConfig .PARAMETER EnvironmentId The unique id of the environment that you want to take action upon The Id can be located inside the LCS portal .PARAMETER LcsApiUri URI / URL to the LCS API you want to use Depending where your LCS project is located, there are several valid URI's / URL's Valid options: "https://lcsapi.lcs.dynamics.com" "https://lcsapi.eu.lcs.dynamics.com" "https://lcsapi.fr.lcs.dynamics.com" "https://lcsapi.sa.lcs.dynamics.com" "https://lcsapi.uae.lcs.dynamics.com" "https://lcsapi.ch.lcs.dynamics.com" "https://lcsapi.lcs.dynamics.cn" "https://lcsapi.gov.lcs.microsoftdynamics.us" Default value can be configured using Set-D365LcsApiConfig .PARAMETER FailOnErrorMessage Instruct the cmdlet to write logging information to the console, if there is an error message in the response from the LCS endpoint Used in combination with either Enable-D365Exception cmdlet, or the -EnableException directly on this cmdlet, it will throw an exception and break/stop execution of the script This allows you to implement custom retry / error handling logic .PARAMETER RetryTimeout The retry timeout, before the cmdlet should quit retrying based on the 429 status code Needs to be provided in the timspan notation: "hh:mm:ss" hh is the number of hours, numerical notation only mm is the number of minutes ss is the numbers of seconds Each section of the timeout has to valid, e.g. hh can maximum be 23 mm can maximum be 59 ss can maximum be 59 Not setting this parameter will result in the cmdlet to try for ever to handle the 429 push back from the endpoint .PARAMETER EnableException This parameters disables user-friendly warnings and enables the throwing of exceptions This is less user friendly, but allows catching exceptions in calling scripts .EXAMPLE PS C:\> Invoke-D365LcsEnvironmentStart -ProjectId 123456789 -EnvironmentId "13cc7700-c13b-4ea3-81cd-2d26fa72ec5e" -BearerToken "JldjfafLJdfjlfsalfd..." -LcsApiUri "https://lcsapi.lcs.dynamics.com" This will trigger the environment start operation upon the given environment through the LCS API. The LCS project is identified by the ProjectId 123456789, which can be obtained in the LCS portal. The environment is identified by the EnvironmentId "13cc7700-c13b-4ea3-81cd-2d26fa72ec5e", which can be obtained in the LCS portal. The request will authenticate with the BearerToken "JldjfafLJdfjlfsalfd...". The http request will be going to the LcsApiUri "https://lcsapi.lcs.dynamics.com" .EXAMPLE PS C:\> Invoke-D365LcsEnvironmentStart -EnvironmentId "13cc7700-c13b-4ea3-81cd-2d26fa72ec5e" This will trigger the environment start operation upon the given environment through the LCS API. The environment is identified by the EnvironmentId "13cc7700-c13b-4ea3-81cd-2d26fa72ec5e", which can be obtained in the LCS portal. All default values will come from the configuration available from Get-D365LcsApiConfig. The default values can be configured using Set-D365LcsApiConfig. .EXAMPLE PS C:\> Invoke-D365LcsEnvironmentStart -ProjectId 123456789 -EnvironmentId "13cc7700-c13b-4ea3-81cd-2d26fa72ec5e" -RetryTimeout "00:01:00" This will trigger the environment start operation upon the given environment through the LCS API, and allow for the cmdlet to retry for no more than 1 minute. The LCS project is identified by the ProjectId 123456789, which can be obtained in the LCS portal. The environment is identified by the EnvironmentId "13cc7700-c13b-4ea3-81cd-2d26fa72ec5e", which can be obtained in the LCS portal. All default values will come from the configuration available from Get-D365LcsApiConfig. The default values can be configured using Set-D365LcsApiConfig. .LINK Get-D365LcsApiConfig .LINK Get-D365LcsApiToken .LINK Invoke-D365LcsApiRefreshToken .LINK Set-D365LcsApiConfig .LINK Invoke-D365LcsEnvironmentStop .NOTES Only Customer Managed IAAS environments are supported with this API. Microsoft Managed IAAS environments need to remain online to allow for Microsoft update operations and are not supported with this API. Self-service environments do not have a stop functionality and will not work with this API. Tags: Environment, Start, StartStop, Stop, LCS, Api Author: Mötz Jensen (@Splaxi), Billy Richardson (@richardsondev) #> function Invoke-D365LcsEnvironmentStart { [CmdletBinding()] [OutputType()] param( [int] $ProjectId = $Script:LcsApiProjectId, [Alias('Token')] [string] $BearerToken = $Script:LcsApiBearerToken, [Parameter(Mandatory = $true)] [string] $EnvironmentId, [string] $LcsApiUri = $Script:LcsApiLcsApiUri, [switch] $FailOnErrorMessage, [Timespan] $RetryTimeout = "00:00:00", [switch] $EnableException ) Invoke-TimeSignal -Start if (-not ($BearerToken.StartsWith("Bearer "))) { $BearerToken = "Bearer $BearerToken" } $environmentAction = Start-LcsEnvironmentStartStopV2 -ProjectId $ProjectId -BearerToken $BearerToken -EnvironmentId $EnvironmentId -IsStop $False -LcsApiUri $LcsApiUri -RetryTimeout $RetryTimeout if (Test-PSFFunctionInterrupt) { return } if ($FailOnErrorMessage -and $environmentAction.ErrorMessage) { $messageString = "The request against LCS succeeded, but the response was an error message for the operation: <c='em'>$($environmentAction.ErrorMessage)</c>." $errorMessagePayload = "`r`n$($environmentAction | ConvertTo-Json)" Write-PSFMessage -Level Host -Message $messageString -Exception $([System.Exception]::new($($errorMessagePayload))) -Target $environmentAction Stop-PSFFunction -Message "Stopping because of errors." -Exception $([System.Exception]::new($($errorMessagePayload))) -Target $environmentAction } $temp = [PSCustomObject]@{ EnvironmentId = "$EnvironmentId"; ProjectId = $ProjectId } #Hack to silence the PSScriptAnalyzer $temp | Out-Null $environmentAction | Select-PSFObject *, "OperationActivityId as ActivityId", "EnvironmentId from temp as EnvironmentId", "ProjectId from temp as ProjectId" -TypeName "D365FO.TOOLS.LCS.Environment.Operation.Status" Invoke-TimeSignal -End } |