VaporShell.CloudWatch.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSCloudWatchAlarmDimension { <# .SYNOPSIS Adds an AWS::CloudWatch::Alarm.Dimension resource property to the template. Dimension is an embedded property of the AWS::CloudWatch::Alarm type. Dimensions are arbitrary name/value pairs that can be associated with a CloudWatch metric. You can specify a maximum of 10 dimensions for a given metric. .DESCRIPTION Adds an AWS::CloudWatch::Alarm.Dimension resource property to the template. Dimension is an embedded property of the AWS::CloudWatch::Alarm type. Dimensions are arbitrary name/value pairs that can be associated with a CloudWatch metric. You can specify a maximum of 10 dimensions for a given metric. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-dimension.html .PARAMETER Name The name of the dimension, from 1–255 characters in length. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-dimension.html#cfn-cloudwatch-alarm-dimension-name PrimitiveType: String UpdateType: Mutable .PARAMETER Value The value for the dimension, from 1–255 characters in length. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-dimension.html#cfn-cloudwatch-alarm-dimension-value PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAlarmDimension])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] [object] $Value ) Process { $obj = [CloudWatchAlarmDimension]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAlarmDimension' function Add-VSCloudWatchAlarmMetric { <# .SYNOPSIS Adds an AWS::CloudWatch::Alarm.Metric resource property to the template. The Metric property type represents a specific metric. Metric is a property of the MetricStat: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricstat.html property type. .DESCRIPTION Adds an AWS::CloudWatch::Alarm.Metric resource property to the template. The Metric property type represents a specific metric. Metric is a property of the MetricStat: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricstat.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metric.html .PARAMETER Dimensions The dimensions for the metric. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metric.html#cfn-cloudwatch-alarm-metric-dimensions DuplicatesAllowed: True ItemType: Dimension Type: List UpdateType: Mutable .PARAMETER MetricName The name of the metric. This is a required field. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metric.html#cfn-cloudwatch-alarm-metric-metricname PrimitiveType: String UpdateType: Mutable .PARAMETER Namespace The namespace of the metric. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metric.html#cfn-cloudwatch-alarm-metric-namespace PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAlarmMetric])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Dimensions, [parameter(Mandatory = $false)] [object] $MetricName, [parameter(Mandatory = $false)] [object] $Namespace ) Process { $obj = [CloudWatchAlarmMetric]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAlarmMetric' function Add-VSCloudWatchAlarmMetricDataQuery { <# .SYNOPSIS Adds an AWS::CloudWatch::Alarm.MetricDataQuery resource property to the template. The MetricDataQuery property type specifies the metric data to return, and whether this call is just retrieving a batch set of data for one metric, or is performing a math expression on metric data. .DESCRIPTION Adds an AWS::CloudWatch::Alarm.MetricDataQuery resource property to the template. The MetricDataQuery property type specifies the metric data to return, and whether this call is just retrieving a batch set of data for one metric, or is performing a math expression on metric data. Any expression used must return a single time series. For more information, see Metric Math Syntax and Functions: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/using-metric-math.html#metric-math-syntax in the *Amazon CloudWatch User Guide*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html .PARAMETER AccountId *Update requires*: No interruption: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-no-interrupt Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html#cfn-cloudwatch-alarm-metricdataquery-accountid PrimitiveType: String UpdateType: Mutable .PARAMETER Expression The math expression to be performed on the returned data, if this object is performing a math expression. This expression can use the Id of the other metrics to refer to those metrics, and can also use the Id of other expressions to use the result of those expressions. For more information about metric math expressions, see Metric Math Syntax and Functions: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/using-metric-math.html#metric-math-syntax in the *Amazon CloudWatch User Guide*. Within each MetricDataQuery object, you must specify either Expression or MetricStat but not both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html#cfn-cloudwatch-alarm-metricdataquery-expression PrimitiveType: String UpdateType: Mutable .PARAMETER Id A short name used to tie this object to the results in the response. This name must be unique within a single call to GetMetricData. If you are performing math expressions on this set of data, this name represents that data and can serve as a variable in the mathematical expression. The valid characters are letters, numbers, and underscore. The first character must be a lowercase letter. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html#cfn-cloudwatch-alarm-metricdataquery-id PrimitiveType: String UpdateType: Mutable .PARAMETER Label A human-readable label for this metric or expression. This is especially useful if this is an expression, so that you know what the value represents. If the metric or expression is shown in a CloudWatch dashboard widget, the label is shown. If Label is omitted, CloudWatch generates a default. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html#cfn-cloudwatch-alarm-metricdataquery-label PrimitiveType: String UpdateType: Mutable .PARAMETER MetricStat The metric to be returned, along with statistics, period, and units. Use this parameter only if this object is retrieving a metric and not performing a math expression on returned data. Within one MetricDataQuery object, you must specify either Expression or MetricStat but not both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html#cfn-cloudwatch-alarm-metricdataquery-metricstat Type: MetricStat UpdateType: Mutable .PARAMETER Period *Update requires*: No interruption: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-no-interrupt Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html#cfn-cloudwatch-alarm-metricdataquery-period PrimitiveType: Integer UpdateType: Mutable .PARAMETER ReturnData This option indicates whether to return the timestamps and raw data values of this metric. If you are performing this call just to do math expressions and do not also need the raw data returned, you can specify False. If you omit this, the default of True is used. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html#cfn-cloudwatch-alarm-metricdataquery-returndata PrimitiveType: Boolean UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAlarmMetricDataQuery])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $AccountId, [parameter(Mandatory = $false)] [object] $Expression, [parameter(Mandatory = $true)] [object] $Id, [parameter(Mandatory = $false)] [object] $Label, [parameter(Mandatory = $false)] $MetricStat, [parameter(Mandatory = $false)] [object] $Period, [parameter(Mandatory = $false)] [object] $ReturnData ) Process { $obj = [CloudWatchAlarmMetricDataQuery]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAlarmMetricDataQuery' function Add-VSCloudWatchAlarmMetricStat { <# .SYNOPSIS Adds an AWS::CloudWatch::Alarm.MetricStat resource property to the template. This structure defines the metric to be returned, along with the statistics, period, and units. .DESCRIPTION Adds an AWS::CloudWatch::Alarm.MetricStat resource property to the template. This structure defines the metric to be returned, along with the statistics, period, and units. MetricStat is a property of the MetricDataQuery: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricstat.html .PARAMETER Metric The metric to return, including the metric name, namespace, and dimensions. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricstat.html#cfn-cloudwatch-alarm-metricstat-metric Type: Metric UpdateType: Mutable .PARAMETER Period The granularity, in seconds, of the returned data points. For metrics with regular resolution, a period can be as short as one minute 60 seconds and must be a multiple of 60. For high-resolution metrics that are collected at intervals of less than one minute, the period can be 1, 5, 10, 30, 60, or any multiple of 60. High-resolution metrics are those metrics stored by a PutMetricData call that includes a StorageResolution of 1 second. If the StartTime parameter specifies a time stamp that is greater than 3 hours ago, you must specify the period as follows or no data points in that time range is returned: + Start time between 3 hours and 15 days ago - Use a multiple of 60 seconds 1 minute. + Start time between 15 and 63 days ago - Use a multiple of 300 seconds 5 minutes. + Start time greater than 63 days ago - Use a multiple of 3600 seconds 1 hour. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricstat.html#cfn-cloudwatch-alarm-metricstat-period PrimitiveType: Integer UpdateType: Mutable .PARAMETER Stat The statistic to return. It can include any CloudWatch statistic or extended statistic. For a list of valid values, see the table in Statistics: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/cloudwatch_concepts.html#Statistic in the *Amazon CloudWatch User Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricstat.html#cfn-cloudwatch-alarm-metricstat-stat PrimitiveType: String UpdateType: Mutable .PARAMETER Unit The unit to use for the returned data points. Valid values are: Seconds, Microseconds, Milliseconds, Bytes, Kilobytes, Megabytes, Gigabytes, Terabytes, Bits, Kilobits, Megabits, Gigabits, Terabits, Percent, Count, Bytes/Second, Kilobytes/Second, Megabytes/Second, Gigabytes/Second, Terabytes/Second, Bits/Second, Kilobits/Second, Megabits/Second, Gigabits/Second, Terabits/Second, Count/Second, or None. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricstat.html#cfn-cloudwatch-alarm-metricstat-unit PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAlarmMetricStat])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] $Metric, [parameter(Mandatory = $true)] [object] $Period, [parameter(Mandatory = $true)] [object] $Stat, [parameter(Mandatory = $false)] [object] $Unit ) Process { $obj = [CloudWatchAlarmMetricStat]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAlarmMetricStat' function Add-VSCloudWatchAnomalyDetectorConfiguration { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector.Configuration resource property to the template. Specifies details about how the anomaly detection model is to be trained, including time ranges to exclude when training and updating the model. The configuration can also include the time zone to use for the metric. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector.Configuration resource property to the template. Specifies details about how the anomaly detection model is to be trained, including time ranges to exclude when training and updating the model. The configuration can also include the time zone to use for the metric. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-configuration.html .PARAMETER MetricTimeZone The time zone to use for the metric. This is useful to enable the model to automatically account for daylight savings time changes if the metric is sensitive to such time changes. To specify a time zone, use the name of the time zone as specified in the standard tz database. For more information, see tz database: https://en.wikipedia.org/wiki/Tz_database. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-configuration.html#cfn-cloudwatch-anomalydetector-configuration-metrictimezone PrimitiveType: String UpdateType: Mutable .PARAMETER ExcludedTimeRanges Specifies an array of time ranges to exclude from use when the anomaly detection model is trained and updated. Use this to make sure that events that could cause unusual values for the metric, such as deployments, aren't used when CloudWatch creates or updates the model. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-configuration.html#cfn-cloudwatch-anomalydetector-configuration-excludedtimeranges ItemType: Range UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetectorConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $MetricTimeZone, [parameter(Mandatory = $false)] [object] $ExcludedTimeRanges ) Process { $obj = [CloudWatchAnomalyDetectorConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAnomalyDetectorConfiguration' function Add-VSCloudWatchAnomalyDetectorDimension { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector.Dimension resource property to the template. Expands the identity of a metric. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector.Dimension resource property to the template. Expands the identity of a metric. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-dimension.html .PARAMETER Value The value representing the dimension measurement. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-dimension.html#cfn-cloudwatch-anomalydetector-dimension-value PrimitiveType: String UpdateType: Immutable .PARAMETER Name The name of the dimension. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-dimension.html#cfn-cloudwatch-anomalydetector-dimension-name PrimitiveType: String UpdateType: Immutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetectorDimension])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Value, [parameter(Mandatory = $true)] [object] $Name ) Process { $obj = [CloudWatchAnomalyDetectorDimension]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAnomalyDetectorDimension' function Add-VSCloudWatchAnomalyDetectorMetric { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector.Metric resource property to the template. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector.Metric resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metric.html .PARAMETER MetricName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metric.html#cfn-cloudwatch-anomalydetector-metric-metricname PrimitiveType: String UpdateType: Immutable .PARAMETER Dimensions Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metric.html#cfn-cloudwatch-anomalydetector-metric-dimensions ItemType: Dimension UpdateType: Immutable .PARAMETER Namespace Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metric.html#cfn-cloudwatch-anomalydetector-metric-namespace PrimitiveType: String UpdateType: Immutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetectorMetric])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $MetricName, [parameter(Mandatory = $false)] [object] $Dimensions, [parameter(Mandatory = $true)] [object] $Namespace ) Process { $obj = [CloudWatchAnomalyDetectorMetric]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAnomalyDetectorMetric' function Add-VSCloudWatchAnomalyDetectorMetricDataQueries { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector.MetricDataQueries resource property to the template. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector.MetricDataQueries resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricdataqueries.html .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetectorMetricDataQueries])] [cmdletbinding()] Param( ) Process { $obj = [CloudWatchAnomalyDetectorMetricDataQueries]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAnomalyDetectorMetricDataQueries' function Add-VSCloudWatchAnomalyDetectorMetricDataQuery { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector.MetricDataQuery resource property to the template. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector.MetricDataQuery resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricdataquery.html .PARAMETER AccountId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricdataquery.html#cfn-cloudwatch-anomalydetector-metricdataquery-accountid PrimitiveType: String UpdateType: Immutable .PARAMETER ReturnData Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricdataquery.html#cfn-cloudwatch-anomalydetector-metricdataquery-returndata PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Expression Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricdataquery.html#cfn-cloudwatch-anomalydetector-metricdataquery-expression PrimitiveType: String UpdateType: Immutable .PARAMETER MetricStat Type: MetricStat Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricdataquery.html#cfn-cloudwatch-anomalydetector-metricdataquery-metricstat UpdateType: Immutable .PARAMETER Label Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricdataquery.html#cfn-cloudwatch-anomalydetector-metricdataquery-label PrimitiveType: String UpdateType: Mutable .PARAMETER Period Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricdataquery.html#cfn-cloudwatch-anomalydetector-metricdataquery-period PrimitiveType: Integer UpdateType: Immutable .PARAMETER Id Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricdataquery.html#cfn-cloudwatch-anomalydetector-metricdataquery-id PrimitiveType: String UpdateType: Immutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetectorMetricDataQuery])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $AccountId, [parameter(Mandatory = $false)] [object] $ReturnData, [parameter(Mandatory = $false)] [object] $Expression, [parameter(Mandatory = $false)] $MetricStat, [parameter(Mandatory = $false)] [object] $Label, [parameter(Mandatory = $false)] [object] $Period, [parameter(Mandatory = $true)] [object] $Id ) Process { $obj = [CloudWatchAnomalyDetectorMetricDataQuery]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAnomalyDetectorMetricDataQuery' function Add-VSCloudWatchAnomalyDetectorMetricMathAnomalyDetector { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector.MetricMathAnomalyDetector resource property to the template. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector.MetricMathAnomalyDetector resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricmathanomalydetector.html .PARAMETER MetricDataQueries Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricmathanomalydetector.html#cfn-cloudwatch-anomalydetector-metricmathanomalydetector-metricdataqueries ItemType: MetricDataQuery UpdateType: Immutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetectorMetricMathAnomalyDetector])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $MetricDataQueries ) Process { $obj = [CloudWatchAnomalyDetectorMetricMathAnomalyDetector]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAnomalyDetectorMetricMathAnomalyDetector' function Add-VSCloudWatchAnomalyDetectorMetricStat { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector.MetricStat resource property to the template. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector.MetricStat resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricstat.html .PARAMETER Stat Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricstat.html#cfn-cloudwatch-anomalydetector-metricstat-stat PrimitiveType: String UpdateType: Immutable .PARAMETER Period Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricstat.html#cfn-cloudwatch-anomalydetector-metricstat-period PrimitiveType: Integer UpdateType: Immutable .PARAMETER Metric Type: Metric Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricstat.html#cfn-cloudwatch-anomalydetector-metricstat-metric UpdateType: Immutable .PARAMETER Unit Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-metricstat.html#cfn-cloudwatch-anomalydetector-metricstat-unit PrimitiveType: String UpdateType: Immutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetectorMetricStat])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Stat, [parameter(Mandatory = $true)] [object] $Period, [parameter(Mandatory = $true)] $Metric, [parameter(Mandatory = $false)] [object] $Unit ) Process { $obj = [CloudWatchAnomalyDetectorMetricStat]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAnomalyDetectorMetricStat' function Add-VSCloudWatchAnomalyDetectorRange { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector.Range resource property to the template. Each Range specifies one range of days or times to exclude from use for training or updating an anomaly detection model. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector.Range resource property to the template. Each Range specifies one range of days or times to exclude from use for training or updating an anomaly detection model. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-range.html .PARAMETER EndTime The end time of the range to exclude. The format is yyyy-MM-dd'T'HH:mm:ss. For example, 2019-07-01T23:59:59. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-range.html#cfn-cloudwatch-anomalydetector-range-endtime PrimitiveType: String UpdateType: Mutable .PARAMETER StartTime The start time of the range to exclude. The format is yyyy-MM-dd'T'HH:mm:ss. For example, 2019-07-01T23:59:59. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-range.html#cfn-cloudwatch-anomalydetector-range-starttime PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetectorRange])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $EndTime, [parameter(Mandatory = $true)] [object] $StartTime ) Process { $obj = [CloudWatchAnomalyDetectorRange]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAnomalyDetectorRange' function Add-VSCloudWatchAnomalyDetectorSingleMetricAnomalyDetector { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector.SingleMetricAnomalyDetector resource property to the template. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector.SingleMetricAnomalyDetector resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-singlemetricanomalydetector.html .PARAMETER MetricName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-singlemetricanomalydetector.html#cfn-cloudwatch-anomalydetector-singlemetricanomalydetector-metricname PrimitiveType: String UpdateType: Immutable .PARAMETER Stat Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-singlemetricanomalydetector.html#cfn-cloudwatch-anomalydetector-singlemetricanomalydetector-stat PrimitiveType: String UpdateType: Immutable .PARAMETER Dimensions Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-singlemetricanomalydetector.html#cfn-cloudwatch-anomalydetector-singlemetricanomalydetector-dimensions ItemType: Dimension UpdateType: Immutable .PARAMETER Namespace Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-anomalydetector-singlemetricanomalydetector.html#cfn-cloudwatch-anomalydetector-singlemetricanomalydetector-namespace PrimitiveType: String UpdateType: Immutable .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetectorSingleMetricAnomalyDetector])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $MetricName, [parameter(Mandatory = $false)] [object] $Stat, [parameter(Mandatory = $false)] [object] $Dimensions, [parameter(Mandatory = $false)] [object] $Namespace ) Process { $obj = [CloudWatchAnomalyDetectorSingleMetricAnomalyDetector]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchAnomalyDetectorSingleMetricAnomalyDetector' function Add-VSCloudWatchInsightRuleTags { <# .SYNOPSIS Adds an AWS::CloudWatch::InsightRule.Tags resource property to the template. A list of key-value pairs to associate with the Contributor Insights rule. You can associate as many as 50 tags with a rule. .DESCRIPTION Adds an AWS::CloudWatch::InsightRule.Tags resource property to the template. A list of key-value pairs to associate with the Contributor Insights rule. You can associate as many as 50 tags with a rule. Tags can help you organize and categorize your resources. For more information, see Tagging Your Amazon CloudWatch Resources: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch-Tagging.html. To be able to associate tags with a rule, you must have the cloudwatch:TagResource permission in addition to the cloudwatch:PutInsightRule permission. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-insightrule-tags.html .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchInsightRuleTags])] [cmdletbinding()] Param( ) Process { $obj = [CloudWatchInsightRuleTags]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchInsightRuleTags' function Add-VSCloudWatchMetricStreamMetricStreamFilter { <# .SYNOPSIS Adds an AWS::CloudWatch::MetricStream.MetricStreamFilter resource property to the template. .DESCRIPTION Adds an AWS::CloudWatch::MetricStream.MetricStreamFilter resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-metricstream-metricstreamfilter.html .PARAMETER Namespace Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-metricstream-metricstreamfilter.html#cfn-cloudwatch-metricstream-metricstreamfilter-namespace UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchMetricStreamMetricStreamFilter])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Namespace ) Process { $obj = [CloudWatchMetricStreamMetricStreamFilter]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchMetricStreamMetricStreamFilter' function Add-VSCloudWatchMetricStreamMetricStreamStatisticsConfiguration { <# .SYNOPSIS Adds an AWS::CloudWatch::MetricStream.MetricStreamStatisticsConfiguration resource property to the template. .DESCRIPTION Adds an AWS::CloudWatch::MetricStream.MetricStreamStatisticsConfiguration resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-metricstream-metricstreamstatisticsconfiguration.html .PARAMETER AdditionalStatistics Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-metricstream-metricstreamstatisticsconfiguration.html#cfn-cloudwatch-metricstream-metricstreamstatisticsconfiguration-additionalstatistics UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER IncludeMetrics Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-metricstream-metricstreamstatisticsconfiguration.html#cfn-cloudwatch-metricstream-metricstreamstatisticsconfiguration-includemetrics UpdateType: Mutable Type: List ItemType: MetricStreamStatisticsMetric DuplicatesAllowed: False .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchMetricStreamMetricStreamStatisticsConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] $AdditionalStatistics, [parameter(Mandatory = $true)] [object] $IncludeMetrics ) Process { $obj = [CloudWatchMetricStreamMetricStreamStatisticsConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchMetricStreamMetricStreamStatisticsConfiguration' function Add-VSCloudWatchMetricStreamMetricStreamStatisticsMetric { <# .SYNOPSIS Adds an AWS::CloudWatch::MetricStream.MetricStreamStatisticsMetric resource property to the template. .DESCRIPTION Adds an AWS::CloudWatch::MetricStream.MetricStreamStatisticsMetric resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-metricstream-metricstreamstatisticsmetric.html .PARAMETER MetricName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-metricstream-metricstreamstatisticsmetric.html#cfn-cloudwatch-metricstream-metricstreamstatisticsmetric-metricname UpdateType: Mutable PrimitiveType: String .PARAMETER Namespace Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-metricstream-metricstreamstatisticsmetric.html#cfn-cloudwatch-metricstream-metricstreamstatisticsmetric-namespace UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchMetricStreamMetricStreamStatisticsMetric])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $MetricName, [parameter(Mandatory = $true)] [object] $Namespace ) Process { $obj = [CloudWatchMetricStreamMetricStreamStatisticsMetric]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudWatchMetricStreamMetricStreamStatisticsMetric' function New-VSCloudWatchAlarm { <# .SYNOPSIS Adds an AWS::CloudWatch::Alarm resource to the template. The AWS::CloudWatch::Alarm type specifies an alarm and associates it with the specified metric or metric math expression. .DESCRIPTION Adds an AWS::CloudWatch::Alarm resource to the template. The AWS::CloudWatch::Alarm type specifies an alarm and associates it with the specified metric or metric math expression. When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then executed. When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous configuration of the alarm. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ActionsEnabled Indicates whether actions should be executed during any changes to the alarm state. The default is TRUE. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-actionsenabled PrimitiveType: Boolean UpdateType: Mutable .PARAMETER AlarmActions The list of actions to execute when this alarm transitions into an ALARM state from any other state. Specify each action as an Amazon Resource Name ARN. For more information about creating alarms and the actions that you can specify, see PutMetricAlarm: https://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/API_PutMetricAlarm.html in the *Amazon CloudWatch API Reference*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-alarmactions DuplicatesAllowed: True PrimitiveItemType: String Type: List UpdateType: Mutable .PARAMETER AlarmDescription The description of the alarm. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-alarmdescription PrimitiveType: String UpdateType: Mutable .PARAMETER AlarmName The name of the alarm. If you don't specify a name, AWS CloudFormation generates a unique physical ID and uses that ID for the alarm name. If you specify a name, you cannot perform updates that require replacement of this resource. You can perform updates that require no or some interruption. If you must replace the resource, specify a new name. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-alarmname PrimitiveType: String UpdateType: Immutable .PARAMETER ComparisonOperator The arithmetic operation to use when comparing the specified statistic and threshold. The specified statistic value is used as the first operand. You can specify the following values: GreaterThanThreshold, GreaterThanOrEqualToThreshold, LessThanThreshold, or LessThanOrEqualToThreshold. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-comparisonoperator PrimitiveType: String UpdateType: Mutable .PARAMETER DatapointsToAlarm The number of datapoints that must be breaching to trigger the alarm. This is used only if you are setting an "M out of N" alarm. In that case, this value is the M. For more information, see Evaluating an Alarm: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/AlarmThatSendsEmail.html#alarm-evaluation in the *Amazon CloudWatch User Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarm-datapointstoalarm PrimitiveType: Integer UpdateType: Mutable .PARAMETER Dimensions The dimensions for the metric associated with the alarm. For an alarm based on a math expression, you can't specify Dimensions. Instead, you use Metrics. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-dimension DuplicatesAllowed: True ItemType: Dimension Type: List UpdateType: Mutable .PARAMETER EvaluateLowSampleCountPercentile Used only for alarms based on percentiles. If ignore, the alarm state does not change during periods with too few data points to be statistically significant. If evaluate or this parameter is not used, the alarm is always evaluated and possibly changes state no matter how many data points are available. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-evaluatelowsamplecountpercentile PrimitiveType: String UpdateType: Mutable .PARAMETER EvaluationPeriods The number of periods over which data is compared to the specified threshold. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-evaluationperiods PrimitiveType: Integer UpdateType: Mutable .PARAMETER ExtendedStatistic The percentile statistic for the metric associated with the alarm. Specify a value between p0.0 and p100. For an alarm based on a math expression, you can't specify ExtendedStatistic. Instead, you use Metrics. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-extendedstatistic PrimitiveType: String UpdateType: Mutable .PARAMETER InsufficientDataActions The actions to execute when this alarm transitions to the INSUFFICIENT_DATA state from any other state. Each action is specified as an Amazon Resource Name ARN. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-insufficientdataactions DuplicatesAllowed: True PrimitiveItemType: String Type: List UpdateType: Mutable .PARAMETER MetricName The name of the metric associated with the alarm. This is required for an alarm based on a metric. For an alarm based on a math expression, you use Metrics instead and you can't specify MetricName. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-metricname PrimitiveType: String UpdateType: Mutable .PARAMETER Metrics An array that enables you to create an alarm based on the result of a metric math expression. Each item in the array either retrieves a metric or performs a math expression. If you specify the Metrics parameter, you cannot specify MetricName, Dimensions, Period, Namespace, Statistic, ExtendedStatistic, or Unit. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarm-metrics DuplicatesAllowed: False ItemType: MetricDataQuery Type: List UpdateType: Mutable .PARAMETER Namespace The namespace of the metric associated with the alarm. This is required for an alarm based on a metric. For an alarm based on a math expression, you can't specify Namespace and you use Metrics instead. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-namespace PrimitiveType: String UpdateType: Mutable .PARAMETER OKActions The actions to execute when this alarm transitions to the OK state from any other state. Each action is specified as an Amazon Resource Name ARN. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-okactions DuplicatesAllowed: True PrimitiveItemType: String Type: List UpdateType: Mutable .PARAMETER Period The period, in seconds, over which the statistic is applied. This is required for an alarm based on a metric. Valid values are 10, 30, 60, and any multiple of 60. For an alarm based on a math expression, you can't specify Period, and instead you use the Metrics parameter. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-period PrimitiveType: Integer UpdateType: Mutable .PARAMETER Statistic The statistic for the metric associated with the alarm, other than percentile. For percentile statistics, use ExtendedStatistic. For an alarm based on a math expression, you can't specify Statistic. Instead, you use Metrics. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-statistic PrimitiveType: String UpdateType: Mutable .PARAMETER Threshold The value to compare with the specified statistic. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-threshold PrimitiveType: Double UpdateType: Mutable .PARAMETER ThresholdMetricId In an alarm based on an anomaly detection model, this is the ID of the ANOMALY_DETECTION_BAND function used as the threshold for the alarm. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-dynamic-threshold PrimitiveType: String UpdateType: Mutable .PARAMETER TreatMissingData Sets how this alarm is to handle missing data points. Valid values are breaching, notBreaching, ignore, and missing. For more information, see Configuring How CloudWatch Alarms Treat Missing Data: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/AlarmThatSendsEmail.html#alarms-and-missing-data in the *Amazon CloudWatch User Guide*. If you omit this parameter, the default behavior of missing is used. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-treatmissingdata PrimitiveType: String UpdateType: Mutable .PARAMETER Unit The unit of the metric associated with the alarm. Specify this only if you are creating an alarm based on a single metric. Do not specify this if you are specifying a Metrics array. You can specify the following values: Seconds, Microseconds, Milliseconds, Bytes, Kilobytes, Megabytes, Gigabytes, Terabytes, Bits, Kilobits, Megabits, Gigabits, Terabits, Percent, Count, Bytes/Second, Kilobytes/Second, Megabytes/Second, Gigabytes/Second, Terabytes/Second, Bits/Second, Kilobits/Second, Megabits/Second, Gigabits/Second, Terabits/Second, Count/Second, or None. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cw-alarm.html#cfn-cloudwatch-alarms-unit PrimitiveType: String UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAlarm])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $ActionsEnabled, [parameter(Mandatory = $false)] $AlarmActions, [parameter(Mandatory = $false)] [object] $AlarmDescription, [parameter(Mandatory = $false)] [object] $AlarmName, [parameter(Mandatory = $true)] [object] $ComparisonOperator, [parameter(Mandatory = $false)] [object] $DatapointsToAlarm, [parameter(Mandatory = $false)] [object] $Dimensions, [parameter(Mandatory = $false)] [object] $EvaluateLowSampleCountPercentile, [parameter(Mandatory = $true)] [object] $EvaluationPeriods, [parameter(Mandatory = $false)] [object] $ExtendedStatistic, [parameter(Mandatory = $false)] $InsufficientDataActions, [parameter(Mandatory = $false)] [object] $MetricName, [parameter(Mandatory = $false)] [object] $Metrics, [parameter(Mandatory = $false)] [object] $Namespace, [parameter(Mandatory = $false)] $OKActions, [parameter(Mandatory = $false)] [object] $Period, [parameter(Mandatory = $false)] [object] $Statistic, [parameter(Mandatory = $false)] [object] $Threshold, [parameter(Mandatory = $false)] [object] $ThresholdMetricId, [parameter(Mandatory = $false)] [object] $TreatMissingData, [parameter(Mandatory = $false)] [object] $Unit, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudWatchAlarm]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudWatchAlarm' function New-VSCloudWatchAnomalyDetector { <# .SYNOPSIS Adds an AWS::CloudWatch::AnomalyDetector resource to the template. The AWS::CloudWatch::AnomalyDetector type specifies an anomaly detection band for a certain metric and statistic. The band represents the expected "normal" range for the metric values. Anomaly detection bands can be used for visualization of a metric's expected values, and for alarms. .DESCRIPTION Adds an AWS::CloudWatch::AnomalyDetector resource to the template. The AWS::CloudWatch::AnomalyDetector type specifies an anomaly detection band for a certain metric and statistic. The band represents the expected "normal" range for the metric values. Anomaly detection bands can be used for visualization of a metric's expected values, and for alarms. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-anomalydetector.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER MetricName The name of the metric associated with the anomaly detection band. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-anomalydetector.html#cfn-cloudwatch-anomalydetector-metricname PrimitiveType: String UpdateType: Immutable .PARAMETER Stat The statistic of the metric associated with the anomaly detection band. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-anomalydetector.html#cfn-cloudwatch-anomalydetector-stat PrimitiveType: String UpdateType: Immutable .PARAMETER Configuration Specifies details about how the anomaly detection model is to be trained, including time ranges to exclude when training and updating the model. The configuration can also include the time zone to use for the metric. Type: Configuration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-anomalydetector.html#cfn-cloudwatch-anomalydetector-configuration UpdateType: Mutable .PARAMETER MetricMathAnomalyDetector Type: MetricMathAnomalyDetector Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-anomalydetector.html#cfn-cloudwatch-anomalydetector-metricmathanomalydetector UpdateType: Immutable .PARAMETER Dimensions The dimensions of the metric associated with the anomaly detection band. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-anomalydetector.html#cfn-cloudwatch-anomalydetector-dimensions ItemType: Dimension UpdateType: Immutable .PARAMETER Namespace The namespace of the metric associated with the anomaly detection band. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-anomalydetector.html#cfn-cloudwatch-anomalydetector-namespace PrimitiveType: String UpdateType: Immutable .PARAMETER SingleMetricAnomalyDetector Type: SingleMetricAnomalyDetector Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-anomalydetector.html#cfn-cloudwatch-anomalydetector-singlemetricanomalydetector UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchAnomalyDetector])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $MetricName, [parameter(Mandatory = $false)] [object] $Stat, [parameter(Mandatory = $false)] $Configuration, [parameter(Mandatory = $false)] $MetricMathAnomalyDetector, [parameter(Mandatory = $false)] [object] $Dimensions, [parameter(Mandatory = $false)] [object] $Namespace, [parameter(Mandatory = $false)] $SingleMetricAnomalyDetector, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudWatchAnomalyDetector]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudWatchAnomalyDetector' function New-VSCloudWatchCompositeAlarm { <# .SYNOPSIS Adds an AWS::CloudWatch::CompositeAlarm resource to the template. The AWS::CloudWatch::CompositeAlarm type creates or updates a composite alarm. When you create a composite alarm, you specify a rule expression for the alarm that takes into account the alarm states of other alarms that you have created. The composite alarm goes into ALARM state only if all conditions of the rule are met. .DESCRIPTION Adds an AWS::CloudWatch::CompositeAlarm resource to the template. The AWS::CloudWatch::CompositeAlarm type creates or updates a composite alarm. When you create a composite alarm, you specify a rule expression for the alarm that takes into account the alarm states of other alarms that you have created. The composite alarm goes into ALARM state only if all conditions of the rule are met. The alarms specified in a composite alarm's rule expression can include metric alarms and other composite alarms. Using composite alarms can reduce alarm noise. You can create multiple metric alarms, and also create a composite alarm and set up alerts only for the composite alarm. For example, you could create a composite alarm that goes into ALARM state only when more than one of the underlying metric alarms are in ALARM state. Currently, the only alarm actions that can be taken by composite alarms are notifying SNS topics. When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then executed. For a composite alarm, this initial time after creation is the only time that the alarm can be in INSUFFICIENT_DATA state. When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous configuration of the alarm. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-compositealarm.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AlarmActions The actions to execute when this alarm transitions to the ALARM state from any other state. Each action is specified as an Amazon Resource Name ARN. For more information about creating alarms and the actions that you can specify, see PutCompositeAlarm: https://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/API_PutCompositeAlarm.html in the *Amazon CloudWatch API Reference*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-compositealarm.html#cfn-cloudwatch-compositealarm-alarmactions UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER ActionsEnabled Indicates whether actions should be executed during any changes to the alarm state of the composite alarm. The default is TRUE. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-compositealarm.html#cfn-cloudwatch-compositealarm-actionsenabled UpdateType: Mutable PrimitiveType: Boolean .PARAMETER AlarmName The name for the composite alarm. This name must be unique within your AWS account. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-compositealarm.html#cfn-cloudwatch-compositealarm-alarmname UpdateType: Immutable PrimitiveType: String .PARAMETER AlarmDescription The description for the composite alarm. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-compositealarm.html#cfn-cloudwatch-compositealarm-alarmdescription UpdateType: Mutable PrimitiveType: String .PARAMETER AlarmRule An expression that specifies which other alarms are to be evaluated to determine this composite alarm's state. For each alarm that you reference, you designate a function that specifies whether that alarm needs to be in ALARM state, OK state, or INSUFFICIENT_DATA state. You can use operators AND, OR and NOT to combine multiple functions in a single expression. You can use parenthesis to logically group the functions in your expression. You can use either alarm names or ARNs to reference the other alarms that are to be evaluated. Functions can include the following: + ALARM"alarm-name or alarm-ARN" is TRUE if the named alarm is in ALARM state. + OK"alarm-name or alarm-ARN" is TRUE if the named alarm is in OK state. + INSUFFICIENT_DATA"alarm-name or alarm-ARN" is TRUE if the named alarm is in INSUFFICIENT_DATA state. + TRUE always evaluates to TRUE. + FALSE always evaluates to FALSE. TRUE and FALSE are useful for testing a complex AlarmRule structure, and for testing your alarm actions. For more information about AlarmRule syntax, see PutCompositeAlarm: https://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/API_PutCompositeAlarm.html in the *Amazon CloudWatch API Reference*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-compositealarm.html#cfn-cloudwatch-compositealarm-alarmrule UpdateType: Mutable PrimitiveType: String .PARAMETER InsufficientDataActions The actions to execute when this alarm transitions to the INSUFFICIENT_DATA state from any other state. Each action is specified as an Amazon Resource Name ARN. For more information about creating alarms and the actions that you can specify, see PutCompositeAlarm: https://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/API_PutCompositeAlarm.html in the *Amazon CloudWatch API Reference*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-compositealarm.html#cfn-cloudwatch-compositealarm-insufficientdataactions UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER OKActions The actions to execute when this alarm transitions to the OK state from any other state. Each action is specified as an Amazon Resource Name ARN. For more information about creating alarms and the actions that you can specify, see PutCompositeAlarm: https://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/API_PutCompositeAlarm.html in the *Amazon CloudWatch API Reference*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-compositealarm.html#cfn-cloudwatch-compositealarm-okactions UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchCompositeAlarm])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] $AlarmActions, [parameter(Mandatory = $false)] [object] $ActionsEnabled, [parameter(Mandatory = $true)] [object] $AlarmName, [parameter(Mandatory = $false)] [object] $AlarmDescription, [parameter(Mandatory = $true)] [object] $AlarmRule, [parameter(Mandatory = $false)] $InsufficientDataActions, [parameter(Mandatory = $false)] $OKActions, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudWatchCompositeAlarm]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudWatchCompositeAlarm' function New-VSCloudWatchDashboard { <# .SYNOPSIS Adds an AWS::CloudWatch::Dashboard resource to the template. The AWS::CloudWatch::Dashboard resource specifies an Amazon CloudWatch dashboard. A dashboard is a customizable home page in the CloudWatch console that you can use to monitor your AWS resources in a single view. .DESCRIPTION Adds an AWS::CloudWatch::Dashboard resource to the template. The AWS::CloudWatch::Dashboard resource specifies an Amazon CloudWatch dashboard. A dashboard is a customizable home page in the CloudWatch console that you can use to monitor your AWS resources in a single view. All dashboards in your account are global, not region-specific. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-dashboard.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER DashboardName The name of the dashboard. The name must be between 1 and 255 characters. If you do not specify a name, one will be generated automatically. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-dashboard.html#cfn-cloudwatch-dashboard-dashboardname PrimitiveType: String UpdateType: Immutable .PARAMETER DashboardBody The detailed information about the dashboard in JSON format, including the widgets to include and their location on the dashboard. This parameter is required. For more information about the syntax, see Dashboard Body Structure and Syntax: https://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/CloudWatch-Dashboard-Body-Structure.html. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-dashboard.html#cfn-cloudwatch-dashboard-dashboardbody PrimitiveType: String UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchDashboard])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $DashboardName, [parameter(Mandatory = $true)] [object] $DashboardBody, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudWatchDashboard]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudWatchDashboard' function New-VSCloudWatchInsightRule { <# .SYNOPSIS Adds an AWS::CloudWatch::InsightRule resource to the template. Creates or updates a Contributor Insights rule. Rules evaluate log events in a CloudWatch Logs log group, enabling you to find contributor data for the log events in that log group. For more information, see Using Contributor Insights to Analyze High-Cardinality Data: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/ContributorInsights.html in the *Amazon CloudWatch User Guide*. .DESCRIPTION Adds an AWS::CloudWatch::InsightRule resource to the template. Creates or updates a Contributor Insights rule. Rules evaluate log events in a CloudWatch Logs log group, enabling you to find contributor data for the log events in that log group. For more information, see Using Contributor Insights to Analyze High-Cardinality Data: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/ContributorInsights.html in the *Amazon CloudWatch User Guide*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-insightrule.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER RuleState The current state of the rule. Valid values are ENABLED and DISABLED. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-insightrule.html#cfn-cloudwatch-insightrule-rulestate PrimitiveType: String UpdateType: Mutable .PARAMETER RuleBody The definition of the rule, as a JSON object. For details about the syntax, see Contributor Insights Rule Syntax: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/ContributorInsights-RuleSyntax.html in the *Amazon CloudWatch User Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-insightrule.html#cfn-cloudwatch-insightrule-rulebody PrimitiveType: String UpdateType: Mutable .PARAMETER RuleName The name of the rule. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-insightrule.html#cfn-cloudwatch-insightrule-rulename PrimitiveType: String UpdateType: Immutable .PARAMETER Tags A list of key-value pairs to associate with the Contributor Insights rule. You can associate as many as 50 tags with a rule. Tags can help you organize and categorize your resources. For more information, see Tagging Your Amazon CloudWatch Resources: https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch-Tagging.html. To be able to associate tags with a rule, you must have the cloudwatch:TagResource permission in addition to the cloudwatch:PutInsightRule permission. Type: Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-insightrule.html#cfn-cloudwatch-insightrule-tags UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchInsightRule])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $RuleState, [parameter(Mandatory = $true)] [object] $RuleBody, [parameter(Mandatory = $true)] [object] $RuleName, [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudWatchInsightRule]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudWatchInsightRule' function New-VSCloudWatchMetricStream { <# .SYNOPSIS Adds an AWS::CloudWatch::MetricStream resource to the template. .DESCRIPTION Adds an AWS::CloudWatch::MetricStream resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-metricstream.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ExcludeFilters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-metricstream.html#cfn-cloudwatch-metricstream-excludefilters UpdateType: Mutable Type: List ItemType: MetricStreamFilter DuplicatesAllowed: False .PARAMETER FirehoseArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-metricstream.html#cfn-cloudwatch-metricstream-firehosearn UpdateType: Mutable PrimitiveType: String .PARAMETER IncludeFilters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-metricstream.html#cfn-cloudwatch-metricstream-includefilters UpdateType: Mutable Type: List ItemType: MetricStreamFilter DuplicatesAllowed: False .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-metricstream.html#cfn-cloudwatch-metricstream-name UpdateType: Immutable PrimitiveType: String .PARAMETER RoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-metricstream.html#cfn-cloudwatch-metricstream-rolearn UpdateType: Mutable PrimitiveType: String .PARAMETER OutputFormat Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-metricstream.html#cfn-cloudwatch-metricstream-outputformat UpdateType: Mutable PrimitiveType: String .PARAMETER StatisticsConfigurations Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-metricstream.html#cfn-cloudwatch-metricstream-statisticsconfigurations UpdateType: Mutable Type: List ItemType: MetricStreamStatisticsConfiguration DuplicatesAllowed: False .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudwatch-metricstream.html#cfn-cloudwatch-metricstream-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudWatchMetricStream])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $ExcludeFilters, [parameter(Mandatory = $true)] [object] $FirehoseArn, [parameter(Mandatory = $false)] [object] $IncludeFilters, [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $true)] [object] $RoleArn, [parameter(Mandatory = $true)] [object] $OutputFormat, [parameter(Mandatory = $false)] [object] $StatisticsConfigurations, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudWatchMetricStream]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudWatchMetricStream' |