DSCResources/DSC_OpticalDiskDriveLetter/en-US/about_OpticalDiskDriveLetter.help.txt
|
.NAME
OpticalDiskDriveLetter .DESCRIPTION The resource is used to set the drive letter of an optical disk drive (e.g. a CDROM or DVD drive). It can be used to set the drive letter of a specific optical disk drive if there are multiple in the system by specifying a value greater than 1 for the DiskId parameter. In a system with a single optical disk drive then the DiskId should be set to 1. In systems with multiple optical disks, the DiskId should be set to the ordinal number of the required optical disk found in the list returned when executing the following cmdlet: `powershell Get-CimInstance -ClassName Win32_CDROMDrive ` Warning: Adding and removing optical drive devices to a system may cause the order the optical drives appear in the system to change. Therefore, the drive ordinal number may be affected in these situations. It is designed to ignore temporary optical disk drives that are created when mounting ISOs on Windows Server 2012+. With the Device ID, we look for the length of the string after the final backslash (crude, but appears to work so far). Example: `powershell # DeviceID for a virtual drive in a Hyper-V VM "SCSI\CDROM&VENMSFT&PRODVIRTUAL_DVD-ROM\000006" # DeviceID for a mounted ISO in a Hyper-V VM "SCSI\CDROM&VENMSFT&PRODVIRTUAL_DVD-ROM\2&1F4ADFFE&0&000002" ` .PARAMETER DiskId Key - String Specifies the optical disk number for the disk to assign the drive letter to. .PARAMETER DriveLetter Required - String Specifies the drive letter to assign to the optical disk. Can be a single letter, optionally followed by a colon. This value is ignored if Ensure is set to Absent. .PARAMETER Ensure Write - String Allowed values: Present, Absent Determines whether a drive letter should be assigned to the optical disk. Defaults to 'Present'. .EXAMPLE 1 This configuration will set the drive letter of the first optical disk drive in the system to 'Z'. Configuration OpticalDiskDriveLetter_SetDriveLetter { Import-DSCResource -ModuleName StorageDsc Node localhost { OpticalDiskDriveLetter SetFirstOpticalDiskDriveLetterToZ { DiskId = 1 DriveLetter = 'Z' } } } .EXAMPLE 2 This configuration will remove the drive letter of the first optical disk drive. Configuration OpticalDiskDriveLetter_RemoveDriveLetter { Import-DSCResource -ModuleName StorageDsc Node localhost { OpticalDiskDriveLetter RemoveFirstOpticalDiskDriveLetter { DiskId = 1 DriveLetter = 'X' # This value is ignored Ensure = 'Absent' } } } .EXAMPLE 3 This configuration will set the drive letter of the first optical disk drive in the system to 'Y'. It will set the drive letter of the second optical disk drive to 'Z'. It will remove the drive letter from the third optical disk drive in the system. Configuration OpticalDiskDriveLetter_SetDriveLetterMulti { Import-DSCResource -ModuleName StorageDsc Node localhost { OpticalDiskDriveLetter SetFirstOpticalDiskDriveLetterToY { DiskId = 1 DriveLetter = 'Y' } OpticalDiskDriveLetter SetSecondOpticalDiskDriveLetterToZ { DiskId = 2 DriveLetter = 'Z' } OpticalDiskDriveLetter RemoveThirdOpticalDiskDriveLetter { DiskId = 3 DriveLetter = 'A' Ensure = 'Absent' } } } |