DSCResources/DSC_SqlSetup/en-US/about_SqlSetup.help.txt
|
.NAME
SqlSetup .DESCRIPTION The SqlSetup DSC resource installs SQL Server on the target node. ## Requirements - Target machine must be running Windows Server 2012 or later. - For configurations that utilize the 'InstallFailoverCluster' action, the following parameters are required (beyond those required for the standalone installation). See the article https://docs.microsoft.com/en-us/sql/database-engine/install-windows/install-sql-server-from-the-command-prompt under the section https://docs.microsoft.com/en-us/sql/database-engine/install-windows/install-sql-server-from-the-command-prompt#ClusterInstall for more information. - InstanceName (can be 'MSSQLSERVER' if you want to install a default clustered instance). - FailoverClusterNetworkName - FailoverClusterIPAddress - Additional parameters needed when installing Database Engine. - InstallSQLDataDir - AgtSvcAccount - SQLSvcAccount - SQLSysAdminAccounts - Additional parameters needed when installing Analysis Services. - ASSysAdminAccounts - AsSvcAccount - These parameters cannot be used for configurations that utilize the 'InstallFailoverCluster' action: - BrowserSvcStartupType - The parameters below can only be used when installing SQL Server 2016 or later: - SqlTempDbFileCount - SqlTempDbFileSize - SqlTempDbFileGrowth - SqlTempDbLogFileSize - SqlTempDbLogFileGrowth - When installing SQL Server Analysis Services the account used to start the service must have the correct permissions in directory tree for the data folders. If not the service can fail with an access denied error. For more information see the https://github.com/dsccommunity/SqlServerDsc/issues/1443. To change permissions on folders the DSC resource https://github.com/dsccommunity/FileSystemDsc can be used. - On certain operating systems, when using least privilege for the service account for the SQL Server Database Engine the security policy setting https://docs.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/network-access-restrict-clients-allowed-to-make-remote-sam-calls can result in an access denied when validating accounts in the domain. For more information see the https://github.com/dsccommunity/SqlServerDsc/issues/1559. ## Features supported This is a list of currently supported features. All features might not be available on all versions of SQL Server. - SQLENGINE - REPLICATION - DQ - DQC - BOL - CONN - BC - SDK - MDS - FULLTEXT - RS - AS - IS - SSMS - ADV_SSMS > [!NOTE] > It is not possible to add or remove features to a SQL Server failover > cluster. This is a limitation of SQL Server. See article > https://support.microsoft.com/en-us/help/2547273/you-cannot-add-or-remove-features-to-a-sql-server-2008,-sql-server-2008-r2,-or-sql-server-2012-failover-cluster. ## Skip rules The parameter SkipRule accept one or more skip rules with will be passed to setup.exe. Using the parameter SkipRule is not recommended in a production environment unless there is a valid reason for it. For more information about skip rules see the article https://deep.data.blog/2014/04/02/sql-2012-setup-rules-the-missing-reference/. ## Credentials for running the resource ### PsDscRunAsCredential If PsDscRunAsCredential is set, the installation will be performed with those credentials, and the user name will be used as the first system administrator. ### SYSTEM If PsDscRunAsCredential is not assigned credentials then installation will be performed by the SYSTEM account. When installing as the SYSTEM account, then parameter SQLSysAdminAccounts and ASSysAdminAccounts must be specified when installing feature Database Engine and Analysis Services respectively. ## Credentials for service accounts ### Service Accounts Service account username containing dollar sign ('$') is allowed, but if the dollar sign is at the end of the username it will be considered a Managed Service Account. ### Managed Service Accounts If a service account username has a dollar sign at the end of the name it will be considered a Managed Service Account. Any password passed in the credential object will be ignored, meaning the account is not expected to need a '*SVCPASSWORD' argument in the setup arguments. ## Note about 'tempdb' properties The properties SqlTempDbFileSize and SqlTempDbFileGrowth that are returned from Get-TargetResource will return the sum of the average size and growth. If tempdb has data files with both percentage and megabytes the value returned is a sum of the average megabytes and the average percentage. For example is there is one data file using growth 100MB and another file having growth set to 10% then the returned value would be 110. This will be notable if there are multiple files in the filegroup PRIMARY with different sizes and growths. ## Considerations for the parameter SourceCredential Using the parameter SourceCredential will trigger a copy of the installation media to a temp folder on the target node. Setup will then be started from the temp folder on the target node. For any subsequent calls to the resource, the parameter SourceCredential is used to evaluate what major version the file 'setup.exe' has in the path set, again, by the parameter SourcePath. To know how the temp folder is evaluated please read the online documentation for https://msdn.microsoft.com/en-us/library/system.io.path.gettemppath(v=vs.110.aspx). If the path, that is assigned to parameter SourcePath, contains a leaf folder, for example '\server\share\folder', then that leaf folder will be used as the name of the temporary folder. If the path, that is assigned to parameter SourcePath, does not have a leaf folder, for example '\server\share', then a unique GUID will be used as the name of the temporary folder. ## Feature flags Not to be mistaken with the Features parameter. Feature flags are used to toggle resource functionality on or off. One or more feature flags can be added to the parameter FeatureFlag, i.e. FeatureFlag = @('DetectionSharedFeatures'). > [!NOTE] > The functionality, exposed with a feature flag, can be changed > from one release to another, including having breaking changes. <!-- markdownlint-disable MD013 --> Feature flag | Description --- | --- DetectionSharedFeatures | A new way of detecting if the shared features is installed or not. This was implemented because the previous implementation did not work fully with SQL Server 2017. AnalysisServicesConnection | A new method of loading the assembly Microsoft.AnalysisServices. Using this, no longer is the helper function Connect-SqlAnalysis using LoadWithPartial() to load the assembly Microsoft.AnalysisServices. This requires the https://www.powershellgallery.com/packages/SqlServer to be present on the node. <!-- markdownlint-enable MD013 --> ## Known issues All issues are not listed here, see https://github.com/dsccommunity/SqlServerDsc/issues?q=is%3Aissue+is%3Aopen+in%3Atitle+SqlSetup. .PARAMETER Action Write - String Allowed values: Install, Upgrade, InstallFailoverCluster, AddNode, PrepareFailoverCluster, CompleteFailoverCluster The action to be performed. Default value is 'Install'. <br />> [!NOTE] AddNode is not currently functional. .PARAMETER SourcePath Required - String The path to the root of the source files for installation. I.e and UNC path to a shared resource. Environment variables can be used in the path. .PARAMETER SourceCredential Write - Instance Credentials used to access the path set in the parameter SourcePath. See section #considerations regarding the parameter SourceCredential. .PARAMETER SuppressReboot Write - Boolean Suppresses reboot. .PARAMETER ForceReboot Write - Boolean Forces reboot. .PARAMETER Features Write - String SQL Server features to be installed. .PARAMETER InstanceName Key - String Specifies the name of the instance to be installed. .PARAMETER InstanceID Write - String SQL Server instance ID (if different from parameter InstanceName). .PARAMETER ProductKey Write - String Product key for licensed installations. .PARAMETER UpdateEnabled Write - String Enabled updates during installation. .PARAMETER UpdateSource Write - String Path to the source of updates to be applied during installation. .PARAMETER SQMReporting Write - String Enable customer experience reporting. .PARAMETER ErrorReporting Write - String Enable error reporting. .PARAMETER InstallSharedDir Write - String Installation path for shared SQL Server files. .PARAMETER InstallSharedWOWDir Write - String Installation path for x86 shared SQL Server files. .PARAMETER InstanceDir Write - String Installation path for SQL Server instance files. .PARAMETER SQLSvcAccount Write - Instance Service account for the SQL Server's Windows service. .PARAMETER SQLSvcAccountUsername Read - String Returns the username for the SQL Server's Windows service. .PARAMETER AgtSvcAccount Write - Instance Service account for the SQL Agent's Windows service. .PARAMETER AgtSvcAccountUsername Read - String Returns the username for the SQL Agent's Windows service. .PARAMETER SQLCollation Write - String Collation for SQL Server Database Engine. .PARAMETER SQLSysAdminAccounts Write - StringArray An array of accounts to be made SQL Server administrators. .PARAMETER SecurityMode Write - String Allowed values: SQL, Windows Security mode to apply to the SQL Server instance. The value 'SQL' indicates mixed-mode authentication while the value 'Windows' indicates Windows Authentication. Default value is 'Windows'. .PARAMETER SAPwd Write - Instance Specifies the SA account's password. Only applicable if parameter SecurityMode is set to 'SQL'. .PARAMETER InstallSQLDataDir Write - String Root path for SQL Server database files. .PARAMETER SQLUserDBDir Write - String Path for SQL Server database files. .PARAMETER SQLUserDBLogDir Write - String Path for SQL Server log files. .PARAMETER SQLTempDBDir Write - String Path for SQL Server temporary database data files. .PARAMETER SQLTempDBLogDir Write - String Path for SQL Server temporary database log files. .PARAMETER SQLBackupDir Write - String Path for SQL Server backup files. .PARAMETER FTSvcAccount Write - Instance Service account for the Full Text's Windows service. .PARAMETER FTSvcAccountUsername Read - String Returns the username for the Full Text' Windows service. .PARAMETER RSSvcAccount Write - Instance Service account for Reporting Services's Windows service. .PARAMETER RSSvcAccountUsername Read - String Returns the username for the Reporting Services's Windows service. .PARAMETER RSInstallMode Write - String Allowed values: SharePointFilesOnlyMode, DefaultNativeMode, FilesOnlyMode Specifies the install mode for SQL Server Report Services service. .PARAMETER ASSvcAccount Write - Instance Service account for Analysis Services's Windows service. .PARAMETER ASSvcAccountUsername Read - String Returns the username for the SQL Server Analysis Services's Windows service. .PARAMETER ASCollation Write - String Collation for the SQL Server Analysis Services. .PARAMETER ASSysAdminAccounts Write - StringArray Array of accounts to be made Analysis Services admins. .PARAMETER ASDataDir Write - String Path for Analysis Services's data files. .PARAMETER ASLogDir Write - String Path for Analysis Services's log files. .PARAMETER ASBackupDir Write - String Path for Analysis Services's backup files. .PARAMETER ASTempDir Write - String Path for Analysis Services's temp files. .PARAMETER ASConfigDir Write - String Path for Analysis Services's config files. .PARAMETER ASServerMode Write - String Allowed values: MULTIDIMENSIONAL, TABULAR, POWERPIVOT The server mode for SQL Server Analysis Services instance. The default is to install in Multidimensional mode. Valid values in a cluster scenario are 'MULTIDIMENSIONAL' or 'TABULAR'. Parameter ASServerMode is case-sensitive. All values must be expressed in upper case. .PARAMETER ISSvcAccount Write - Instance Service account for Integration Services's Windows service. .PARAMETER ISSvcAccountUsername Read - String Returns the username for the Integration Services's Windows service. .PARAMETER SqlSvcStartupType Write - String Allowed values: Automatic, Disabled, Manual Specifies the startup mode for the SQL Server Database Engine's Windows service. .PARAMETER AgtSvcStartupType Write - String Allowed values: Automatic, Disabled, Manual Specifies the startup mode for the SQL Server Agent's Windows service. .PARAMETER IsSvcStartupType Write - String Allowed values: Automatic, Disabled, Manual Specifies the startup mode for the SQL Server Integration Services's Windows service. .PARAMETER AsSvcStartupType Write - String Allowed values: Automatic, Disabled, Manual Specifies the startup mode for the SQL Server Analysis Services's Windows service. .PARAMETER RSSVCStartupType Write - String Allowed values: Automatic, Disabled, Manual Specifies the startup mode for the SQL Server Reporting Services's Windows service. .PARAMETER BrowserSvcStartupType Write - String Allowed values: Automatic, Disabled, Manual Specifies the startup mode for SQL Server Browser's Windows service. .PARAMETER FailoverClusterGroupName Write - String The name of the resource group to create for the clustered SQL Server instance. Default is 'SQL Server (InstanceName)'. .PARAMETER FailoverClusterIPAddress Write - StringArray Specifies an array of IP addresses to be assigned to the clustered SQL Server instance. IP addresses must be in https://en.wikipedia.org/wiki/Dot-decimal_notation, for example '10.0.0.100'. If no IP address is specified, uses 'DEFAULT' for this setup parameter. .PARAMETER FailoverClusterNetworkName Write - String Host name to be assigned to the clustered SQL Server instance. .PARAMETER SqlTempdbFileCount Write - UInt32 Specifies the number of temporary database data files to be added by setup. .PARAMETER SqlTempdbFileSize Write - UInt32 Specifies the initial size of each temporary database data file in MB. .PARAMETER SqlTempdbFileGrowth Write - UInt32 Specifies the file growth increment of each temporary database data file in MB. .PARAMETER SqlTempdbLogFileSize Write - UInt32 Specifies the initial size of each temporary database log file in MB. .PARAMETER SqlTempdbLogFileGrowth Write - UInt32 Specifies the file growth increment of each temporary database data file in MB. .PARAMETER NpEnabled Write - Boolean Specifies the state of the Named Pipes protocol for the SQL Server service. The value $true will enable the Named Pipes protocol and $false will disabled it. .PARAMETER TcpEnabled Write - Boolean Specifies the state of the TCP protocol for the SQL Server service. The value $true will enable the TCP protocol and $false will disabled it. .PARAMETER SetupProcessTimeout Write - UInt32 The timeout, in seconds, to wait for the setup process to finish. Default value is 7200 seconds (2 hours). If the setup process does not finish before this time, an error will be thrown. .PARAMETER FeatureFlag Write - StringArray Feature flags are used to toggle DSC resource functionality on or off. See the DSC resource documentation for what additional functionality exist through a feature flag. .PARAMETER UseEnglish Write - Boolean Specifies to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system. .PARAMETER SkipRule Write - StringArray Specifies optional skip rules during setup. .PARAMETER ServerName Write - String Specifies the host or network name of the SQL Server instance. If the SQL Server belongs to a cluster or availability group it could be set to the host name for the listener or cluster group. If using a secure connection the specified value should be the same name that is used in the certificate. Default value is the current computer name. .PARAMETER SqlVersion Write - String Specifies the SQL Server version that should be installed. Only the major version will be used, but the provided value must be set to at least major and minor version (e.g. 14.0). When providing this parameter the media will not be used to evaluate version. Although, if the setup action is Upgrade then setting this parameter will throw an exception as the version from the install media is required. .PARAMETER IsClustered Read - Boolean Returns a boolean value of $true if the instance is clustered, otherwise it returns $false. .EXAMPLE 1 This example shows how to install a default instance of SQL Server, and Analysis Services in Tabular mode, on a single server. .NOTES SQL Server setup is run using the SYSTEM account. Even if SetupCredential is provided it is not used to install SQL Server at this time (see issue #139). Configuration Example { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlInstallCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAdministratorCredential = $SqlInstallCredential, [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlServiceCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAgentServiceCredential = $SqlServiceCredential ) Import-DscResource -ModuleName 'xPSDesiredStateConfiguration' -ModuleVersion '9.1.0' Import-DscResource -ModuleName 'SqlServerDsc' node localhost { #region Install prerequisites for SQL Server WindowsFeature 'NetFramework35' { Name = 'NET-Framework-Core' Source = '\\fileserver.company.local\images$\Win2k12R2\Sources\Sxs' # Assumes built-in Everyone has read permission to the share and path. Ensure = 'Present' } WindowsFeature 'NetFramework45' { Name = 'NET-Framework-45-Core' Ensure = 'Present' } #endregion Install prerequisites for SQL Server #region Install SQL Server SqlSetup 'InstallDefaultInstance' { InstanceName = 'MSSQLSERVER' Features = 'SQLENGINE,AS' SQLCollation = 'SQL_Latin1_General_CP1_CI_AS' SQLSvcAccount = $SqlServiceCredential AgtSvcAccount = $SqlAgentServiceCredential ASSvcAccount = $SqlServiceCredential SQLSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName ASSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName InstallSharedDir = 'C:\Program Files\Microsoft SQL Server' InstallSharedWOWDir = 'C:\Program Files (x86)\Microsoft SQL Server' InstanceDir = 'C:\Program Files\Microsoft SQL Server' InstallSQLDataDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLUserDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLUserDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLTempDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLTempDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLBackupDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Backup' ASServerMode = 'TABULAR' ASConfigDir = 'C:\MSOLAP\Config' ASDataDir = 'C:\MSOLAP\Data' ASLogDir = 'C:\MSOLAP\Log' ASBackupDir = 'C:\MSOLAP\Backup' ASTempDir = 'C:\MSOLAP\Temp' SourcePath = 'C:\InstallMedia\SQL2016RTM' NpEnabled = $true TcpEnabled = $true UpdateEnabled = 'False' UseEnglish = $true ForceReboot = $false PsDscRunAsCredential = $SqlInstallCredential DependsOn = '[WindowsFeature]NetFramework35', '[WindowsFeature]NetFramework45' } #endregion Install SQL Server } } .EXAMPLE 2 This example shows how to install a named instance of SQL Server on a single server. .NOTES SQL Server setup is run using the SYSTEM account. Even if SetupCredential is provided it is not used to install SQL Server at this time (see issue #139). Configuration Example { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlInstallCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAdministratorCredential = $SqlInstallCredential, [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlServiceCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAgentServiceCredential = $SqlServiceCredential ) Import-DscResource -ModuleName 'xPSDesiredStateConfiguration' -ModuleVersion '9.1.0' Import-DscResource -ModuleName 'SqlServerDsc' node localhost { #region Install prerequisites for SQL Server WindowsFeature 'NetFramework35' { Name = 'NET-Framework-Core' Source = '\\fileserver.company.local\images$\Win2k12R2\Sources\Sxs' # Assumes built-in Everyone has read permission to the share and path. Ensure = 'Present' } WindowsFeature 'NetFramework45' { Name = 'NET-Framework-45-Core' Ensure = 'Present' } #endregion Install prerequisites for SQL Server #region Install SQL Server SqlSetup 'InstallNamedInstance-INST2016' { InstanceName = 'INST2016' Features = 'SQLENGINE,AS' SQLCollation = 'SQL_Latin1_General_CP1_CI_AS' SQLSvcAccount = $SqlServiceCredential AgtSvcAccount = $SqlAgentServiceCredential ASSvcAccount = $SqlServiceCredential SQLSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName ASSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName InstallSharedDir = 'C:\Program Files\Microsoft SQL Server' InstallSharedWOWDir = 'C:\Program Files (x86)\Microsoft SQL Server' InstanceDir = 'C:\Program Files\Microsoft SQL Server' InstallSQLDataDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLUserDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLUserDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLTempDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLTempDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLBackupDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Backup' ASConfigDir = 'C:\MSOLAP13.INST2016\Config' ASDataDir = 'C:\MSOLAP13.INST2016\Data' ASLogDir = 'C:\MSOLAP13.INST2016\Log' ASBackupDir = 'C:\MSOLAP13.INST2016\Backup' ASTempDir = 'C:\MSOLAP13.INST2016\Temp' SourcePath = 'C:\InstallMedia\SQL2016RTM' UpdateEnabled = 'False' ForceReboot = $false BrowserSvcStartupType = 'Automatic' PsDscRunAsCredential = $SqlInstallCredential DependsOn = '[WindowsFeature]NetFramework35', '[WindowsFeature]NetFramework45' } #endregion Install SQL Server } } .EXAMPLE 3 This example shows how to install a named instance of SQL Server on a single server, from an UNC path. .NOTES Assumes the credentials assigned to SourceCredential have read permission on the share and on the UNC path. The media will be copied locally, using impersonation with the credentials provided in SourceCredential, so that the SYSTEM account can access the media locally. SQL Server setup is run using the SYSTEM account. Even if SetupCredential is provided it is not used to install SQL Server at this time (see issue #139). Configuration Example { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlInstallCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAdministratorCredential = $SqlInstallCredential, [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlServiceCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAgentServiceCredential = $SqlServiceCredential ) Import-DscResource -ModuleName 'xPSDesiredStateConfiguration' -ModuleVersion '9.1.0' Import-DscResource -ModuleName 'SqlServerDsc' node localhost { #region Install prerequisites for SQL Server WindowsFeature 'NetFramework35' { Name = 'NET-Framework-Core' Source = '\\fileserver.company.local\images$\Win2k12R2\Sources\Sxs' # Assumes built-in Everyone has read permission to the share and path. Ensure = 'Present' } WindowsFeature 'NetFramework45' { Name = 'NET-Framework-45-Core' Ensure = 'Present' } #endregion Install prerequisites for SQL Server #region Install SQL Server SqlSetup 'InstallNamedInstance-INST2016' { InstanceName = 'INST2016' Features = 'SQLENGINE,AS' SQLCollation = 'SQL_Latin1_General_CP1_CI_AS' SQLSvcAccount = $SqlServiceCredential AgtSvcAccount = $SqlAgentServiceCredential ASSvcAccount = $SqlServiceCredential SQLSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName ASSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName InstallSharedDir = 'C:\Program Files\Microsoft SQL Server' InstallSharedWOWDir = 'C:\Program Files (x86)\Microsoft SQL Server' InstanceDir = 'C:\Program Files\Microsoft SQL Server' InstallSQLDataDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLUserDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLUserDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLTempDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLTempDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLBackupDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Backup' ASConfigDir = 'C:\MSOLAP13.INST2016\Config' ASDataDir = 'C:\MSOLAP13.INST2016\Data' ASLogDir = 'C:\MSOLAP13.INST2016\Log' ASBackupDir = 'C:\MSOLAP13.INST2016\Backup' ASTempDir = 'C:\MSOLAP13.INST2016\Temp' SourcePath = '\\fileserver.company.local\images$\SQL2016RTM' SourceCredential = $SqlInstallCredential UpdateEnabled = 'False' ForceReboot = $false BrowserSvcStartupType = 'Automatic' PsDscRunAsCredential = $SqlInstallCredential DependsOn = '[WindowsFeature]NetFramework35', '[WindowsFeature]NetFramework45' } #endregion Install SQL Server } } .EXAMPLE 4 This example shows how to install the first node in a SQL Server failover cluster. .NOTES This example assumes that a Failover Cluster is already present with a Cluster Name Object (CNO), IP-address. This example also assumes that that all necessary shared disks is present, and formatted with the correct drive letter, to accommodate the paths used during SQL Server setup. Minimum is one shared disk. This example also assumes that the Cluster Name Object (CNO) has the permission to manage Computer Objects in the Organizational Unit (OU) where the CNO Computer Object resides in Active Directory. This is necessary so that SQL Server setup can create a Virtual Computer Object (VCO) for the cluster group (Windows Server 2012 R2 and earlier) or cluster role (Windows Server 2016 and later). Also so that the Virtual Computer Object (VCO) can be removed when the Failover CLuster instance is uninstalled. See the DSC resources xFailoverCluster, StorageDsc and iSCSIDsc for information how to setup a failover cluster with DSC. The resource is run using the SYSTEM account, but the setup is run using impersonation, with the credentials in SetupCredential, when Action is 'InstallFailoverCluster'. Assumes the credentials assigned to SourceCredential have read permission on the share and on the UNC path. The media will be copied locally, using impersonation with the credentials provided in SourceCredential, so that the impersonated credentials in SetupCredential can access the media locally. There is currently a bug that prevents the resource to logon to the instance if the current node is not the active node. This is because the resource tries to logon using the SYSTEM account instead of the credentials in SetupCredential, and the resource does not currently support the built-in PsDscRunAsCredential either (see issue #444). Configuration Example { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlInstallCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAdministratorCredential = $SqlInstallCredential, [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlServiceCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAgentServiceCredential = $SqlServiceCredential ) Import-DscResource -ModuleName 'xPSDesiredStateConfiguration' -ModuleVersion '9.1.0' Import-DscResource -ModuleName 'SqlServerDsc' node localhost { #region Install prerequisites for SQL Server WindowsFeature 'NetFramework35' { Name = 'NET-Framework-Core' Source = '\\fileserver.company.local\images$\Win2k12R2\Sources\Sxs' # Assumes built-in Everyone has read permission to the share and path. Ensure = 'Present' } WindowsFeature 'NetFramework45' { Name = 'NET-Framework-45-Core' Ensure = 'Present' } #endregion Install prerequisites for SQL Server #region Install SQL Server Failover Cluster SqlSetup 'InstallNamedInstanceNode1-INST2016' { Action = 'InstallFailoverCluster' ForceReboot = $false UpdateEnabled = 'False' SourcePath = '\\fileserver.company.local\images$\SQL2016RTM' SourceCredential = $SqlInstallCredential InstanceName = 'INST2016' Features = 'SQLENGINE,AS' InstallSharedDir = 'C:\Program Files\Microsoft SQL Server' InstallSharedWOWDir = 'C:\Program Files (x86)\Microsoft SQL Server' InstanceDir = 'C:\Program Files\Microsoft SQL Server' SQLCollation = 'Finnish_Swedish_CI_AS' SQLSvcAccount = $SqlServiceCredential AgtSvcAccount = $SqlAgentServiceCredential SQLSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName ASSvcAccount = $SqlServiceCredential ASSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName # Drive D: must be a shared disk. InstallSQLDataDir = 'D:\MSSQL\Data' SQLUserDBDir = 'D:\MSSQL\Data' SQLUserDBLogDir = 'D:\MSSQL\Log' SQLTempDBDir = 'D:\MSSQL\Temp' SQLTempDBLogDir = 'D:\MSSQL\Temp' SQLBackupDir = 'D:\MSSQL\Backup' ASConfigDir = 'D:\AS\Config' ASDataDir = 'D:\AS\Data' ASLogDir = 'D:\AS\Log' ASBackupDir = 'D:\AS\Backup' ASTempDir = 'D:\AS\Temp' FailoverClusterNetworkName = 'TESTCLU01A' FailoverClusterIPAddress = '192.168.0.46' FailoverClusterGroupName = 'TESTCLU01A' PsDscRunAsCredential = $SqlInstallCredential DependsOn = '[WindowsFeature]NetFramework35', '[WindowsFeature]NetFramework45' } #region Install SQL Server Failover Cluster } } .EXAMPLE 5 This example shows how to add a node to an existing SQL Server failover cluster. .NOTES This example assumes that a Failover Cluster is already present with the first SQL Server Failover Cluster node already installed. This example also assumes that that the same shared disks on the first node is also present on this second node. See the example 4-InstallNamedInstanceInFailoverClusterFirstNode.ps1 for information how to setup the first SQL Server Failover Cluster node. The resource is run using the SYSTEM account, but the setup is run using impersonation, with the credentials in SetupCredential, when Action is 'Addnode'. Assumes the credentials assigned to SourceCredential have read permission on the share and on the UNC path. The media will be copied locally, using impersonation with the credentials provided in SourceCredential, so that the impersonated credentials in SetupCredential can access the media locally. Setup cannot be run using PsDscRunAsCredential at this time (see issue #405 and issue #444). That also means that at this time PsDscRunAsCredential can not be used to access media on the UNC share. There is currently a bug that prevents the resource to logon to the instance if the current node is not the active node. This is because the resource tries to logon using the SYSTEM account instead of the credentials in SetupCredential, and the resource does not currently support the built-in PsDscRunAsCredential either (see issue #444). Configuration Example { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlInstallCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAdministratorCredential = $SqlInstallCredential, [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlServiceCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAgentServiceCredential = $SqlServiceCredential ) Import-DscResource -ModuleName 'xPSDesiredStateConfiguration' -ModuleVersion '9.1.0' Import-DscResource -ModuleName 'SqlServerDsc' node localhost { #region Install prerequisites for SQL Server WindowsFeature 'NetFramework35' { Name = 'NET-Framework-Core' Source = '\\fileserver.company.local\images$\Win2k12R2\Sources\Sxs' # Assumes built-in Everyone has read permission to the share and path. Ensure = 'Present' } WindowsFeature 'NetFramework45' { Name = 'NET-Framework-45-Core' Ensure = 'Present' } #endregion Install prerequisites for SQL Server #region Install SQL Server Failover Cluster SqlSetup 'InstallNamedInstanceNode2-INST2016' { Action = 'AddNode' ForceReboot = $false UpdateEnabled = 'False' SourcePath = '\\fileserver.company.local\images$\SQL2016RTM' SourceCredential = $SqlInstallCredential InstanceName = 'INST2016' Features = 'SQLENGINE,AS' SQLSvcAccount = $SqlServiceCredential AgtSvcAccount = $SqlAgentServiceCredential ASSvcAccount = $SqlServiceCredential FailoverClusterNetworkName = 'TESTCLU01A' PsDscRunAsCredential = $SqlInstallCredential DependsOn = '[WindowsFeature]NetFramework35', '[WindowsFeature]NetFramework45' } #region Install SQL Server Failover Cluster } } .EXAMPLE 6 This example shows how to install a named instance of SQL Server on a single server. .NOTES SQL Server setup is run using the SYSTEM account. Even if SetupCredential is provided it is not used to install SQL Server at this time (see issue #139). Configuration Example { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlInstallCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAdministratorCredential = $SqlInstallCredential, [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlServiceCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAgentServiceCredential = $SqlServiceCredential ) Import-DscResource -ModuleName 'xPSDesiredStateConfiguration' -ModuleVersion '9.1.0' Import-DscResource -ModuleName 'SqlServerDsc' node localhost { #region Install prerequisites for SQL Server WindowsFeature 'NetFramework35' { Name = 'NET-Framework-Core' Source = '\\fileserver.company.local\images$\Win2k12R2\Sources\Sxs' # Assumes built-in Everyone has read permission to the share and path. Ensure = 'Present' } WindowsFeature 'NetFramework45' { Name = 'NET-Framework-45-Core' Ensure = 'Present' } #endregion Install prerequisites for SQL Server #region Install SQL Server SqlSetup 'InstallNamedInstance-INST2016' { InstanceName = 'INST2016' Features = 'SQLENGINE,AS' SQLCollation = 'SQL_Latin1_General_CP1_CI_AS' SQLSvcAccount = $SqlServiceCredential AgtSvcAccount = $SqlAgentServiceCredential ASSvcAccount = $SqlServiceCredential SQLSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName ASSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName InstallSharedDir = 'C:\Program Files\Microsoft SQL Server' InstallSharedWOWDir = 'C:\Program Files (x86)\Microsoft SQL Server' InstanceDir = 'C:\Program Files\Microsoft SQL Server' InstallSQLDataDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLUserDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLUserDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLTempDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLTempDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Data' SQLBackupDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.INST2016\MSSQL\Backup' ASConfigDir = 'C:\MSOLAP13.INST2016\Config' ASDataDir = 'C:\MSOLAP13.INST2016\Data' ASLogDir = 'C:\MSOLAP13.INST2016\Log' ASBackupDir = 'C:\MSOLAP13.INST2016\Backup' ASTempDir = 'C:\MSOLAP13.INST2016\Temp' SourcePath = 'C:\InstallMedia\SQL2016RTM' UpdateEnabled = 'False' ForceReboot = $false SqlSvcStartupType = 'Automatic' AgtSvcStartupType = 'Disabled' AsSvcStartupType = 'Automatic' BrowserSvcStartupType = 'Automatic' PsDscRunAsCredential = $SqlInstallCredential DependsOn = '[WindowsFeature]NetFramework35', '[WindowsFeature]NetFramework45' } #endregion Install SQL Server } } .EXAMPLE 7 This example shows how to install a default instance of SQL Server, and Analysis Services in Tabular mode, on a single server. It contains configurations that apply to Sql Server 2016 or later only. .NOTES SQL Server setup is run using the SYSTEM account. Even if SetupCredential is provided it is not used to install SQL Server at this time (see issue #139). Configuration Example { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlInstallCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAdministratorCredential = $SqlInstallCredential, [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlServiceCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAgentServiceCredential = $SqlServiceCredential ) Import-DscResource -ModuleName 'xPSDesiredStateConfiguration' -ModuleVersion '9.1.0' Import-DscResource -ModuleName 'SqlServerDsc' node localhost { #region Install prerequisites for SQL Server WindowsFeature 'NetFramework35' { Name = 'NET-Framework-Core' Source = '\\fileserver.company.local\images$\Win2k12R2\Sources\Sxs' # Assumes built-in Everyone has read permission to the share and path. Ensure = 'Present' } WindowsFeature 'NetFramework45' { Name = 'NET-Framework-45-Core' Ensure = 'Present' } #endregion Install prerequisites for SQL Server #region Install SQL Server SqlSetup 'InstallDefaultInstance' { InstanceName = 'MSSQLSERVER' Features = 'SQLENGINE,AS' SQLCollation = 'SQL_Latin1_General_CP1_CI_AS' SQLSvcAccount = $SqlServiceCredential AgtSvcAccount = $SqlAgentServiceCredential ASSvcAccount = $SqlServiceCredential SQLSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName ASSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName InstallSharedDir = 'C:\Program Files\Microsoft SQL Server' InstallSharedWOWDir = 'C:\Program Files (x86)\Microsoft SQL Server' InstanceDir = 'C:\Program Files\Microsoft SQL Server' InstallSQLDataDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLUserDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLUserDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLTempDBDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLTempDBLogDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Data' SQLBackupDir = 'C:\Program Files\Microsoft SQL Server\MSSQL13.MSSQLSERVER\MSSQL\Backup' ASServerMode = 'TABULAR' ASConfigDir = 'C:\MSOLAP\Config' ASDataDir = 'C:\MSOLAP\Data' ASLogDir = 'C:\MSOLAP\Log' ASBackupDir = 'C:\MSOLAP\Backup' ASTempDir = 'C:\MSOLAP\Temp' SourcePath = 'C:\InstallMedia\SQL2016RTM' UpdateEnabled = 'False' ForceReboot = $false SqlTempdbFileCount = 4 SqlTempdbFileSize = 1024 SqlTempdbFileGrowth = 512 SqlTempdbLogFileSize = 128 SqlTempdbLogFileGrowth = 64 PsDscRunAsCredential = $SqlInstallCredential DependsOn = '[WindowsFeature]NetFramework35', '[WindowsFeature]NetFramework45' } #endregion Install SQL Server } } .EXAMPLE 8 This example shows how to ad skip rules to setup.exe. .NOTES Using skip rules is not recommended in a production environment. Configuration Example { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlInstallCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAdministratorCredential = $SqlInstallCredential, [Parameter(Mandatory = $true)] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlServiceCredential, [Parameter()] [ValidateNotNullOrEmpty()] [System.Management.Automation.PSCredential] $SqlAgentServiceCredential = $SqlServiceCredential ) Import-DscResource -ModuleName 'xPSDesiredStateConfiguration' -ModuleVersion '9.1.0' Import-DscResource -ModuleName 'SqlServerDsc' node localhost { #region Install prerequisites for SQL Server WindowsFeature 'NetFramework35' { Name = 'NET-Framework-Core' Source = '\\fileserver.company.local\images$\Win2k12R2\Sources\Sxs' # Assumes built-in Everyone has read permission to the share and path. Ensure = 'Present' } WindowsFeature 'NetFramework45' { Name = 'NET-Framework-45-Core' Ensure = 'Present' } #endregion Install prerequisites for SQL Server #region Install SQL Server Failover Cluster SqlSetup 'InstallNamedInstanceNode1-INST2016' { Action = 'InstallFailoverCluster' ForceReboot = $false UpdateEnabled = 'False' SourcePath = '\\fileserver.company.local\images$\SQL2016RTM' SourceCredential = $SqlInstallCredential InstanceName = 'INST2016' Features = 'SQLENGINE' InstallSharedDir = 'C:\Program Files\Microsoft SQL Server' InstallSharedWOWDir = 'C:\Program Files (x86)\Microsoft SQL Server' InstanceDir = 'C:\Program Files\Microsoft SQL Server' SQLCollation = 'Finnish_Swedish_CI_AS' SQLSvcAccount = $SqlServiceCredential AgtSvcAccount = $SqlAgentServiceCredential SQLSysAdminAccounts = 'COMPANY\SQL Administrators', $SqlAdministratorCredential.UserName # Drive D: must be a shared disk. InstallSQLDataDir = 'D:\MSSQL\Data' SQLUserDBDir = 'D:\MSSQL\Data' SQLUserDBLogDir = 'D:\MSSQL\Log' SQLTempDBDir = 'D:\MSSQL\Temp' SQLTempDBLogDir = 'D:\MSSQL\Temp' SQLBackupDir = 'D:\MSSQL\Backup' FailoverClusterNetworkName = 'TESTCLU01A' FailoverClusterIPAddress = '192.168.0.46' FailoverClusterGroupName = 'TESTCLU01A' # Not recommended to use in production. SkipRule = 'Cluster_VerifyForErrors' PsDscRunAsCredential = $SqlInstallCredential DependsOn = '[WindowsFeature]NetFramework35', '[WindowsFeature]NetFramework45' } #region Install SQL Server Failover Cluster } } |