Modules/DscResource.Common/0.14.0/en-US/DscResource.Common.strings.psd1
|
# Localized English (en-US) strings. ConvertFrom-StringData @' TestIsNanoServerOperatingSystemSku = OperatingSystemSKU {0} was returned by Win32_OperatingSystem when detecting if operating system is Nano Server. (DRC0008) ModuleNotFound = Please ensure that the PowerShell module '{0}' is installed. (DRC0009) ParameterUsageWrong = None of the parameter(s) '{0}' may be used at the same time as any of the parameter(s) '{1}'. (DRC0010) AddressFormatError = Address '{0}' is not in the correct format. Please correct the Address parameter in the configuration and try again. (DRC0011) AddressIPv4MismatchError = Address '{0}' is in IPv4 format, which does not match server address family {1}. Please correct either of them in the configuration and try again. (DRC0012) AddressIPv6MismatchError = Address '{0}' is in IPv6 format, which does not match server address family {1}. Please correct either of them in the configuration and try again. (DRC0013) InvalidDesiredValuesError = Property 'DesiredValues' in Test-DscParameterState must be either a Hashtable or CimInstance. Type detected was '{0}'. (DRC0014) InvalidCurrentValuesError = Property 'CurrentValues' in Test-DscParameterState must be either a Hashtable, CimInstance, or CimIntance[]. Type detected was '{0}'. (DRC0015) InvalidPropertiesError = If 'DesiredValues' is a CimInstance then property 'Properties' must contain a value. (DRC0016) MatchPsCredentialUsernameMessage = MATCH: PSCredential username match. Current state is '{0}' and desired state is '{1}'. (DRC0017) NoMatchPsCredentialUsernameMessage = NOTMATCH: PSCredential username mismatch. Current state is '{0}' and desired state is '{1}'. (DRC0018) NoMatchTypeMismatchMessage = NOTMATCH: Type mismatch for property '{0}' Current state type is '{1}' and desired type is '{2}'. (DRC0019) MatchValueMessage = MATCH: Value (type '{0}') for property '{1}' does match. Current state is '{2}' and desired state is '{3}'. (DRC0020) NoMatchValueMessage = NOTMATCH: Value (type '{0}') for property '{1}' does not match. Current state is '{2}' and desired state is '{3}'. (DRC0021) NoMatchValueDifferentCountMessage = NOTMATCH: Value (type '{0}') for property '{1}' does have a different count. Current state count is '{2}' and desired state count is '{3}'. (DRC0022) NoMatchElementTypeMismatchMessage = NOTMATCH: Type mismatch for property '{0}' Current state type of element [{1}] is '{2}' and desired type is '{3}'. (DRC0023) NoMatchElementValueMismatchMessage = NOTMATCH: Value [{0}] (type '{1}') for property '{2}' does match. Current state is '{3}' and desired state is '{4}'. (DRC0024) MatchElementValueMessage = MATCH: Value [{0}] (type '{1}') for property '{2}' does match. Current state is '{3}' and desired state is '{4}'. (DRC0025) PropertyInDesiredStateMessage = Property '{0}' is in desired state. (DRC0026) StartingReverseCheck = Starting with a reverse check. (DRC0027) TestDscParameterCompareMessage = Comparing values in property '{0}'. (DRC0028) TooManyCimInstances = More than one CIM instance was returned from the current state. (DRC0029) TestingCimInstance = Testing CIM instance '{0}' with the key properties '{1}'. (DRC0030) MissingCimInstance = The CIM instance '{0}' with the key properties '{1}' is missing. (DRC0031) ArrayValueIsAbsent = The array value '{0}' is absent. (DRC0032) ArrayValueIsPresent = The array value '{0}' is present. (DRC0033) KeyPropertiesMissing = The hashtable passed to function Test-DscPropertyState is missing the key 'KeyProperties'. This must be set to the property names that makes each instance in the CIM instance collection unique. (DRC0034) ArrayDoesNotMatch = One or more values in an array does not match the desired state. Details of the changes are below. (DRC0035) PropertyValueOfTypeDoesNotMatch = {0} value does not match. Current value is '{1}', but expected the value '{2}'. (DRC0036) UnableToCompareType = Unable to compare the type {0} as it is not handled by the Test-DscPropertyState cmdlet. (DRC0037) EvaluatePropertyState = Evaluating the state of the property '{0}'. (DRC0038) PropertyInDesiredState = The parameter '{0}' is in desired state. (DRC0039) PropertyNotInDesiredState = The parameter '{0}' is not in desired state. (DRC0040) PropertyNotInDesiredStateMessage = Property '{0}' is not in desired state. (DRC0041) NoMatchKeyMessage = NOTMATCH: Value (type '{0}') for property '{1}' does not match. Current state has the key(s) '{2}' and desired state has not. (DRC0042) ## Assert-ElevatedUser ElevatedUser_UserNotElevated = This command must run in an elevated PowerShell session. (DRC0043) ## Assert-RequiredCommandParameter RequiredCommandParameter_SpecificParametersMustAllBeSet = The parameters '{0}' must all be specified. (DRC0044) RequiredCommandParameter_SpecificParametersMustAllBeSetWhenParameterExist = The parameters '{0}' must all be specified if either parameter '{1}' is specified. (DRC0045) '@ |