DSCResources/DSC_SqlProtocolTcpIp/DSC_SqlProtocolTcpIp.psm1
|
$script:sqlServerDscHelperModulePath = Join-Path -Path $PSScriptRoot -ChildPath '..\..\Modules\SqlServerDsc.Common' $script:resourceHelperModulePath = Join-Path -Path $PSScriptRoot -ChildPath '..\..\Modules\DscResource.Common' Import-Module -Name $script:sqlServerDscHelperModulePath Import-Module -Name $script:resourceHelperModulePath $script:localizedData = Get-LocalizedData -DefaultUICulture 'en-US' <# .SYNOPSIS Returns the current state of the SQL Server TCP/IP protocol IP address group for the specified SQL Server instance. .PARAMETER InstanceName Specifies the name of the SQL Server instance to enable the protocol for. .PARAMETER IpAddressGroup Specifies the name of the IP address group in the TCP/IP protocol, e.g. 'IP1', 'IP2' etc., or 'IPAll'. .PARAMETER ServerName Specifies the host name of the SQL Server to be configured. If the SQL Server belongs to a cluster or availability group specify the host name for the listener or cluster group. Default value is the current computer name. .PARAMETER SuppressRestart If set to $true then the any attempt by the resource to restart the service is suppressed. The default value is $false. .PARAMETER RestartTimeout Timeout value for restarting the SQL Server services. The default value is 120 seconds. .NOTES The parameters SuppressRestart and RestartTimeout are part of the function Get-TargetResource to be able to return the value that the configuration have set, or the default values if not. If they weren't passed to the function Get-TargetResource we would have to always return $null which would indicate that they are not set at all. Thought this function should throw an exception if the address group is missing, but voted against it since run Test-DscConfiguration before running a configuration (that would configure NICs) would then fail. Instead choose to output a warning message indicating that the current state cannot be evaluated. #> function Get-TargetResource { [CmdletBinding()] [OutputType([System.Collections.Hashtable])] param ( [Parameter(Mandatory = $true)] [System.String] $InstanceName, [Parameter(Mandatory = $true)] [System.String] $IpAddressGroup, [Parameter()] [ValidateNotNullOrEmpty()] [System.String] $ServerName = (Get-ComputerName), [Parameter()] [System.Boolean] $SuppressRestart = $false, [Parameter()] [System.UInt16] $RestartTimeout = 120 ) $IpAddressGroup = Convert-IpAdressGroupCasing -IpAddressGroup $IpAddressGroup $returnValue = @{ InstanceName = $InstanceName IpAddressGroup = $IpAddressGroup ServerName = $ServerName SuppressRestart = $SuppressRestart RestartTimeout = $RestartTimeout Enabled = $false IpAddress = $null UseTcpDynamicPort = $false TcpPort = $null IsActive = $false AddressFamily = $null TcpDynamicPort = $null } Write-Verbose -Message ( $script:localizedData.GetCurrentState -f $IpAddressGroup, $InstanceName, $ServerName ) Import-SQLPSModule <# Must connect to the local machine name because $ServerName can point to a cluster instance or availability group listener. #> $getServerProtocolObjectParameters = @{ ServerName = Get-ComputerName Instance = $InstanceName ProtocolName = 'TcpIp' } $serverProtocolProperties = Get-ServerProtocolObject @getServerProtocolObjectParameters if ($serverProtocolProperties) { if ($IpAddressGroup -in $serverProtocolProperties.IPAddresses.Name) { $ipAddressGroupObject = $serverProtocolProperties.IPAddresses[$IpAddressGroup] # Values for all IP adress groups. $currentTcpPort = $ipAddressGroupObject.IPAddressProperties['TcpPort'].Value $currentTcpDynamicPort = $ipAddressGroupObject.IPAddressProperties['TcpDynamicPorts'].Value # Get the current state of TcpDynamicPort. if (-not ( [System.String]::IsNullOrEmpty($currentTcpDynamicPort) ` -or [System.String]::IsNullOrWhiteSpace($currentTcpDynamicPort) ) ) { $returnValue.UseTcpDynamicPort = $true $returnValue.TcpDynamicPort = $currentTcpDynamicPort } # Get the current state of TcpPort. if (-not ( [System.String]::IsNullOrEmpty($currentTcpPort) ` -or [System.String]::IsNullOrWhiteSpace($currentTcpPort) ) ) { $returnValue.TcpPort = $currentTcpPort } # Values for all individual IP adress groups. switch ($IpAddressGroup) { 'IPAll' { <# Left blank intentionally. There are no individual IP address properties for the IP address group 'IPAll'. #> } Default { $returnValue.AddressFamily = $ipAddressGroupObject.IPAddress.AddressFamily $returnValue.IpAddress = $ipAddressGroupObject.IPAddress.IPAddressToString $returnValue.Enabled = $ipAddressGroupObject.IPAddressProperties['Enabled'].Value $returnValue.IsActive = $ipAddressGroupObject.IPAddressProperties['Active'].Value } } } else { <# The IP address groups are created automatically so if this happens there is something wrong with the network interfaces on the node that this resource can not solve. #> Write-Warning -Message ( $script:localizedData.GetMissingIpAddressGroup -f $IpAddressGroup ) } } return $returnValue } <# .SYNOPSIS Sets the desired state of the SQL Server TCP/IP protocol IP address group for the specified SQL Server instance. .PARAMETER InstanceName Specifies the name of the SQL Server instance to enable the protocol for. .PARAMETER IpAddressGroup Specifies the name of the IP address group in the TCP/IP protocol, e.g. 'IP1', 'IP2' etc., or 'IPAll'. .PARAMETER ServerName Specifies the host name of the SQL Server to be configured. If the SQL Server belongs to a cluster or availability group specify the host name for the listener or cluster group. Default value is the current computer name. .PARAMETER Enabled Specified if the IP address group should be enabled or disabled. Only used if the IP address group is not set to 'IPAll'. If not specified, the existing value will not be changed. .PARAMETER IpAddress Specifies the IP address for the IP adress group. Only used if the IP address group is not set to 'IPAll'. If not specified, the existing value will not be changed. .PARAMETER UseTcpDynamicPort Specifies whether the SQL Server instance should use a dynamic port. If not specified the existing value will not be changed. This parameter is not allowed to be used at the same time as the parameter TcpPort. .PARAMETER TcpPort Specifies the TCP port(s) that SQL Server should be listening on. If the IP address should listen on more than one port, list all ports as a string value with the port numbers separated with a comma, e.g. '1433,1500,1501'. This parameter is limited to 2047 characters. If not specified, the existing value will not be changed.This parameter is not allowed to be used at the same time as the parameter UseTcpDynamicPort. .PARAMETER SuppressRestart If set to $true then the any attempt by the resource to restart the service is suppressed. The default value is $false. .PARAMETER RestartTimeout Timeout value for restarting the SQL Server services. The default value is 120 seconds. #> function Set-TargetResource { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $InstanceName, [Parameter(Mandatory = $true)] [System.String] $IpAddressGroup, [Parameter()] [ValidateNotNullOrEmpty()] [System.String] $ServerName = (Get-ComputerName), [Parameter()] [System.Boolean] $Enabled, [Parameter()] [System.String] $IpAddress, [Parameter()] [System.Boolean] $UseTcpDynamicPort, [Parameter()] [System.String] $TcpPort, [Parameter()] [System.Boolean] $SuppressRestart = $false, [Parameter()] [System.UInt16] $RestartTimeout = 120 ) $IpAddressGroup = Convert-IpAdressGroupCasing -IpAddressGroup $IpAddressGroup <# Compare the current state against the desired state. Calling this will also import the necessary module to later call Get-ServerProtocolObject which uses the SMO class ManagedComputer. #> $propertyState = Compare-TargetResourceState @PSBoundParameters # Get all properties that are not in desired state. $propertiesNotInDesiredState = $propertyState.Where( { -not $_.InDesiredState }) if ($propertiesNotInDesiredState.Count -gt 0) { Write-Verbose -Message ( $script:localizedData.SetDesiredState -f $IpAddressGroup, $InstanceName ) <# Must connect to the local machine name because $ServerName can point to a cluster instance or availability group listener. #> $getServerProtocolObjectParameters = @{ ServerName = Get-ComputerName Instance = $InstanceName ProtocolName = 'TcpIp' } $serverProtocolProperties = Get-ServerProtocolObject @getServerProtocolObjectParameters if ($serverProtocolProperties) { if ($IpAddressGroup -in $serverProtocolProperties.IPAddresses.Name) { $ipAddressGroupObject = $serverProtocolProperties.IPAddresses[$IpAddressGroup] $isRestartNeeded = $false # Check if TcpPort property need updating. if ($propertiesNotInDesiredState.Where( { $_.ParameterName -eq 'TcpPort' })) { $ipAddressGroupObject.IPAddressProperties['TcpPort'].Value = $TcpPort # Should be using TcpPort, make sure dynamic ports are disabled. $ipAddressGroupObject.IPAddressProperties['TcpDynamicPorts'].Value = '' Write-Verbose -Message ( $script:localizedData.TcpPortHasBeenSet -f $TcpPort, $IpAddressGroup ) $isRestartNeeded = $true } # Check if TcpDynamicPort property need updating. if ($propertiesNotInDesiredState.Where( { $_.ParameterName -eq 'UseTcpDynamicPort' })) { <# Enable TCP dynamic ports using a '0'. When the SQL Server Database Engine is restarted it will get a dynamic port. #> $ipAddressGroupObject.IPAddressProperties['TcpDynamicPorts'].Value = '0' <# Should be using dynamic TCP port, make sure static TCP port are disabled. #> $ipAddressGroupObject.IPAddressProperties['TcpPort'].Value = '' Write-Verbose -Message ( $script:localizedData.TcpDynamicPortHasBeenSet -f $IpAddressGroup ) $isRestartNeeded = $true } # Set individual protocol properties. switch ($IpAddressGroup) { 'IPAll' { <# Left blank intentionally. There are no individual protocol properties for the IP address group IPAll. #> } Default { # Check if Enable property need updating. if ($propertiesNotInDesiredState.Where( { $_.ParameterName -eq 'Enabled' })) { $ipAddressGroupObject.IPAddressProperties['Enabled'].Value = $Enabled if ($Enabled) { Write-Verbose -Message ( $script:localizedData.GroupHasBeenEnabled -f $IpAddressGroup, $InstanceName ) } else { Write-Verbose -Message ( $script:localizedData.GroupHasBeenDisabled -f $IpAddressGroup, $InstanceName ) } $isRestartNeeded = $true } # Check if Enabled property need updating. if ($propertiesNotInDesiredState.Where( { $_.ParameterName -eq 'IpAddress' })) { # Casing of the property IpAddress is important! $ipAddressGroupObject.IPAddressProperties['IpAddress'].Value = $IpAddress Write-Verbose -Message ( $script:localizedData.IpAddressHasBeenSet -f $IpAddressGroup, $IpAddress ) $isRestartNeeded = $true } } } $serverProtocolProperties.Alter() } else { $errorMessage = $script:localizedData.SetMissingIpAddressGroup -f $IpAddressGroup New-ObjectNotFoundException -Message $errorMessage } } else { $errorMessage = $script:localizedData.FailedToGetSqlServerProtocol New-InvalidOperationException -Message $errorMessage } if (-not $SuppressRestart -and $isRestartNeeded) { $restartSqlServiceParameters = @{ ServerName = $ServerName InstanceName = $InstanceName Timeout = $RestartTimeout OwnerNode = Get-ComputerName } Restart-SqlService @restartSqlServiceParameters } elseif ($isRestartNeeded) { Write-Warning -Message $script:localizedData.RestartSuppressed } } else { Write-Verbose -Message ( $script:localizedData.GroupIsInDesiredState -f $IpAddressGroup, $InstanceName ) } } <# .SYNOPSIS Determines the current state of the SQL Server TCP/IP protocol IP address group for the specified SQL Server instance. .PARAMETER InstanceName Specifies the name of the SQL Server instance to enable the protocol for. .PARAMETER IpAddressGroup Specifies the name of the IP address group in the TCP/IP protocol, e.g. 'IP1', 'IP2' etc., or 'IPAll'. .PARAMETER ServerName Specifies the host name of the SQL Server to be configured. If the SQL Server belongs to a cluster or availability group specify the host name for the listener or cluster group. Default value is the current computer name. .PARAMETER Enabled Specified if the IP address group should be enabled or disabled. Only used if the IP address group is not set to 'IPAll'. If not specified, the existing value will not be changed. .PARAMETER IpAddress Specifies the IP address for the IP adress group. Only used if the IP address group is not set to 'IPAll'. If not specified, the existing value will not be changed. .PARAMETER UseTcpDynamicPort Specifies whether the SQL Server instance should use a dynamic port. If not specified the existing value will not be changed. This parameter is not allowed to be used at the same time as the parameter TcpPort. .PARAMETER TcpPort Specifies the TCP port(s) that SQL Server should be listening on. If the IP address should listen on more than one port, list all ports as a string value with the port numbers separated with a comma, e.g. '1433,1500,1501'. This parameter is limited to 2047 characters. If not specified, the existing value will not be changed.This parameter is not allowed to be used at the same time as the parameter UseTcpDynamicPort. .PARAMETER SuppressRestart If set to $true then the any attempt by the resource to restart the service is suppressed. The default value is $false. .PARAMETER RestartTimeout Timeout value for restarting the SQL Server services. The default value is 120 seconds. #> function Test-TargetResource { [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter(Mandatory = $true)] [System.String] $InstanceName, [Parameter(Mandatory = $true)] [System.String] $IpAddressGroup, [Parameter()] [ValidateNotNullOrEmpty()] [System.String] $ServerName = (Get-ComputerName), [Parameter()] [System.Boolean] $Enabled, [Parameter()] [System.String] $IpAddress, [Parameter()] [System.Boolean] $UseTcpDynamicPort, [Parameter()] [System.String] $TcpPort, [Parameter()] [System.Boolean] $SuppressRestart = $false, [Parameter()] [System.UInt16] $RestartTimeout = 120 ) Write-Verbose -Message ( $script:localizedData.TestDesiredState -f $IpAddressGroup, $InstanceName, $ServerName ) $propertyState = Compare-TargetResourceState @PSBoundParameters if ($false -in $propertyState.InDesiredState) { $testTargetResourceReturnValue = $false Write-Verbose -Message ( $script:localizedData.NotInDesiredState -f $IpAddressGroup, $InstanceName ) } else { $testTargetResourceReturnValue = $true Write-Verbose -Message ( $script:localizedData.InDesiredState -f $IpAddressGroup, $InstanceName ) } return $testTargetResourceReturnValue } <# .SYNOPSIS Compares the properties in the current state with the properties of the desired state and returns a hashtable with the comparison result. .PARAMETER InstanceName Specifies the name of the SQL Server instance to enable the protocol for. .PARAMETER IpAddressGroup Specifies the name of the IP address group in the TCP/IP protocol, e.g. 'IP1', 'IP2' etc., or 'IPAll'. .PARAMETER ServerName Specifies the host name of the SQL Server to be configured. If the SQL Server belongs to a cluster or availability group specify the host name for the listener or cluster group. Default value is the current computer name. .PARAMETER Enabled Specified if the IP address group should be enabled or disabled. Only used if the IP address group is not set to 'IPAll'. If not specified, the existing value will not be changed. .PARAMETER IpAddress Specifies the IP address for the IP adress group. Only used if the IP address group is not set to 'IPAll'. If not specified, the existing value will not be changed. .PARAMETER UseTcpDynamicPort Specifies whether the SQL Server instance should use a dynamic port. If not specified the existing value will not be changed. This parameter is not allowed to be used at the same time as the parameter TcpPort. .PARAMETER TcpPort Specifies the TCP port(s) that SQL Server should be listening on. If the IP address should listen on more than one port, list all ports as a string value with the port numbers separated with a comma, e.g. '1433,1500,1501'. This parameter is limited to 2047 characters. If not specified, the existing value will not be changed.This parameter is not allowed to be used at the same time as the parameter UseTcpDynamicPort. .PARAMETER SuppressRestart If set to $true then the any attempt by the resource to restart the service is suppressed. The default value is $false. .PARAMETER RestartTimeout Timeout value for restarting the SQL Server services. The default value is 120 seconds. #> function Compare-TargetResourceState { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $InstanceName, [Parameter(Mandatory = $true)] [System.String] $IpAddressGroup, [Parameter()] [ValidateNotNullOrEmpty()] [System.String] $ServerName = (Get-ComputerName), [Parameter()] [System.Boolean] $Enabled, [Parameter()] [System.String] $IpAddress, [Parameter()] [System.Boolean] $UseTcpDynamicPort, [Parameter()] [System.String] $TcpPort, [Parameter()] [System.Boolean] $SuppressRestart = $false, [Parameter()] [System.UInt16] $RestartTimeout = 120 ) $assertBoundParameterParameters = @{ BoundParameterList = $PSBoundParameters MutuallyExclusiveList1 = @( 'UseTcpDynamicPort' ) MutuallyExclusiveList2 = @( 'TcpPort' ) } Assert-BoundParameter @assertBoundParameterParameters if ($PSBoundParameters.ContainsKey('IpAddress')) { Assert-IpAddress -Address $IpAddress } $getTargetResourceParameters = @{ InstanceName = $InstanceName IpAddressGroup = $IpAddressGroup ServerName = $ServerName SuppressRestart = $SuppressRestart RestartTimeout = $RestartTimeout } <# We remove any parameters not passed by $PSBoundParameters so that Get-TargetResource can also evaluate $PSBoundParameters correctly. Need the @() around the Keys property to get a new array to enumerate. #> @($getTargetResourceParameters.Keys) | ForEach-Object -Process { if (-not $PSBoundParameters.ContainsKey($_)) { $getTargetResourceParameters.Remove($_) } } $getTargetResourceResult = Get-TargetResource @getTargetResourceParameters # Get individual IP address group properties to evaluate. switch ($IpAddressGroup) { 'IPAll' { $propertiesToEvaluate = @( 'UseTcpDynamicPort' 'TcpPort' ) } Default { $propertiesToEvaluate = @( 'Enabled' 'IpAddress' 'UseTcpDynamicPort' 'TcpPort' ) } } $compareTargetResourceStateParameters = @{ CurrentValues = $getTargetResourceResult DesiredValues = $PSBoundParameters Properties = $propertiesToEvaluate } return Compare-ResourcePropertyState @compareTargetResourceStateParameters } <# .SYNOPSIS Converts a IP address group name to the correct casing. .PARAMETER IpAddressGroup Specifies the name of the IP address group in the TCP/IP protocol, e.g. 'IP1', 'IP2' etc., or 'IPAll'. .NOTES SMO is case-sensitive with the address group names. #> function Convert-IpAdressGroupCasing { [CmdletBinding()] [OutputType([System.String])] param ( [Parameter(Mandatory = $true)] [System.String] $IpAddressGroup ) return ($IpAddressGroup.ToUpper() -replace 'IPALL', 'IPAll') } |