SDNExpress.ps1
|
# -------------------------------------------------------------- # Copyright © Microsoft Corporation. All Rights Reserved. # Microsoft Corporation (or based on where you live, one of its affiliates) licenses this sample code for your internal testing purposes only. # Microsoft provides the following sample code AS IS without warranty of any kind. The sample code arenot supported under any Microsoft standard support program or services. # Microsoft further disclaims all implied warranties including, without limitation, any implied warranties of merchantability or of fitness for a particular purpose. # The entire risk arising out of the use or performance of the sample code remains with you. # In no event shall Microsoft, its authors, or anyone else involved in the creation, production, or delivery of the code be liable for any damages whatsoever # (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss) # arising out of the use of or inability to use the sample code, even if Microsoft has been advised of the possibility of such damages. # --------------------------------------------------------------- <# .SYNOPSIS Deploys and configures the Microsoft SDN infrastructure, including creation of the network controller, Software Load Balancer MUX and gateway VMs. Then the VMs and Hyper-V hosts are configured to be used by the Network Controller. When this script completes the SDN infrastructure is ready to be fully used for workload deployments. .EXAMPLE .\SDNExpress.ps1 -ConfigurationDataFile .\MyConfig.psd1 Reads in the configuration from a PSD1 file that contains a hash table of settings data. .EXAMPLE .\SDNExpress -ConfigurationData $MyConfigurationData Uses the hash table that is passed in as the configuration data. This parameter set is useful when programatically generating the configuration data. .EXAMPLE .\SDNExpress Displays a user interface for interactively defining the configuraiton data. At the end you have the option to save as a configuration file before deploying. .NOTES Prerequisites: * All Hyper-V hosts must have Hyper-V enabled and the Virtual Switch already created. * All Hyper-V hosts must be joined to Active Directory. * The physical network must be preconfigured for the necessary subnets and VLANs as defined in the configuration data. * The VHD specified in the configuration data must be reachable from the computer where this script is run. #> [CmdletBinding(DefaultParameterSetName="NoParameters")] param( [Parameter(Mandatory=$true,ParameterSetName="ConfigurationFile")] [String] $ConfigurationDataFile=$null, [Parameter(Mandatory=$true,ParameterSetName="ConfigurationData")] [object] $ConfigurationData=$null, [Switch] $SkipValidation, [Switch] $SkipDeployment, [PSCredential] $DomainJoinCredential = $null, [PSCredential] $NCCredential = $null, [PSCredential] $LocalAdminCredential = $null ) # Script version, should be matched with the config files $ScriptVersion = "3.0" if ((get-wmiobject win32_operatingsystem).caption.Contains("Windows 10")) { get-windowscapability -name rsat.NetworkController.Tools* -online | Add-WindowsCapability -online } else { $feature = get-windowsfeature "RSAT-NetworkController" if ($null -eq $feature) { throw "SDN Express requires Windows Server 2016 or later." } if (!$feature.Installed) { add-windowsfeature "RSAT-NetworkController" } } import-module .\SDNExpress.psm1 -force write-SDNExpressLog "*** Begin SDN Express Deployment ***" write-SDNExpressLog "ParameterSet: $($psCmdlet.ParameterSetName)" write-SDNExpressLog " -ConfigurationDataFile: $ConfigurationDataFile" write-SDNExpressLog " -ConfigurationData: $ConfigurationData" write-SDNExpressLog " -SkipValidation: $SkipValidation" write-SDNExpressLog " -SkipDeployment: $SkipValidation" Write-SDNExpressLog "Version info follows: $($PSVersionTable | out-string)" if ($psCmdlet.ParameterSetName -eq "NoParameters") { write-sdnexpresslog "Begin interactive mode." import-module .\SDNExpressUI.psm1 -force $configData = SDNExpressUI if ($null -eq $configData) { # user cancelled exit } } elseif ($psCmdlet.ParameterSetName -eq "ConfigurationFile") { write-sdnexpresslog "Using configuration file passed in by parameter." $configdata = [hashtable] (Invoke-Expression (Get-Content $ConfigurationDataFile | out-string)) } elseif ($psCmdlet.ParameterSetName -eq "ConfigurationData") { write-sdnexpresslog "Using configuration data object passed in by parameter." $configdata = $configurationData } # if FCNC is enabled, load the modules if ($configdata.UseFCNC) { if(-not [string]::IsNullOrEmpty($Global:FCNC_MODULE_PATH_ROOT)) { ipmo (Join-Path $Global:FCNC_MODULE_PATH_ROOT -ChildPath NetworkControllerFc.psd1) -Force -Scope Global } else { import-Module NetworkControllerFc -ErrorAction SilentlyContinue if ($null -eq (Get-Module NetworkControllerFc)) { ipmo ..\NetworkControllerFc\NetworkControllerFc.psd1 -Force -Scope Global } } # rename and copy package if([string]::IsNullOrEmpty($configdata.FCNCPackage) -eq $false) { write-sdnexpresslog "looking for FCNC package $($configdata.FCNCPackage)" # check if the package exists if (Test-Path $configdata.FCNCPackage) { write-sdnexpresslog "FCNC package found" $configdata.FCNCBins = $configdata.FCNCPackage } else { write-sdnexpresslog "FCNC package not found" throw "FCNC package not found" } # copy the nuget to a temp file, rename to zip , decompress it and delete the temp file write-sdnexpresslog "copying FCNC package to $($configdata.FCNCBins)" Copy-Item $configdata.FCNCPackage "$($configdata.FCNCPackage).zip" -Verbose $configdata.FCNCBins = $configdata.FCNCPackage.Replace(".nupkg", ".zip") Copy-Item $configdata.FCNCPackage $configdata.FCNCBins -Force write-sdnexpresslog "unzipping FCNC package" Expand-Archive -Path $configdata.FCNCBins -DestinationPath $configdata.FCNCBins.Replace(".zip", "") -Force $configdata.FCNCBins = $configdata.FCNCBins.Replace(".zip", "") } } if ($Configdata.ScriptVersion -ne $scriptversion) { write-error "Configuration file version $($ConfigData.ScriptVersion) is not compatible with this version of SDN express. Please update your config file to match the version $scriptversion example." return } function GetPassword { param( [String] $SecurePasswordText, [PSCredential] $Credential, [String] $Message, [String] $UserName ) if ([String]::IsNullOrEmpty($SecurePasswordText) -and ($null -eq $Credential)) { write-sdnexpresslog "No credentials found on command line or in config file. Prompting." $Credential = get-Credential -Message $Message -UserName $UserName } if ($null -ne $Credential) { write-sdnexpresslog "Using credentials from the command line." return $Credential.GetNetworkCredential().Password } try { write-sdnexpresslog "Using credentials from config file." $securepassword = $SecurePasswordText | convertto-securestring -erroraction Ignore $BSTR = [System.Runtime.InteropServices.Marshal]::SecureStringToBSTR($SecurePassword) return [System.Runtime.InteropServices.Marshal]::PtrToStringAuto($BSTR) } catch { write-sdnexpresslog "Unable to decrpypt credentials in config file. Could be from a different user or generated on different computer. Prompting instead." $Credential = get-Credential -Message $Message -UserName $UserName if ($null -eq $credential) { write-sdnexpresslog "User cancelled credential input. Exiting." exit } return $Credential.GetNetworkCredential().Password } } function GetNextMacAddress { param( [String] $MacAddress ) return ("{0:X12}" -f ([convert]::ToInt64($MacAddress.ToUpper().Replace(":", "").Replace("-", ""), 16) + 1)).Insert(2, "-").Insert(5, "-").Insert(8, "-").Insert(11, "-").Insert(14, "-") } try { $DomainJoinPassword = GetPassword $ConfigData.DomainJoinSecurePassword $DomainJoinCredential "Enter credentials for joining VMs to the AD domain." $configdata.DomainJoinUserName $NCPassword = GetPassword $ConfigData.NCSecurePassword $NCCredential "Enter credentials for the Network Controller to use." $configdata.NCUserName $LocalAdminPassword = GetPassword $ConfigData.LocalAdminSecurePassword $LocalAdminCredential "Enter the password for the local administrator of newly created VMs. Username is ignored." "Administrator" $NCSecurePassword = $NCPassword | convertto-securestring -AsPlainText -Force $credential = New-Object System.Management.Automation.PsCredential($ConfigData.NCUsername, $NCSecurePassword) if (![string]::IsNullOrEmpty($ConfigData.ManagementSubnet)) { $ManagementSubnetBits = $ConfigData.ManagementSubnet.Split("/")[1] } if ([string]::IsNullOrEmpty($ConfigData.PASubnet)) { if ($ConfigData.Muxes.Count -gt 0) { throw "Load Balancer Mux configuration requires a PA Subnet." } if ($ConfigData.Gateways.Count -gt 0) { throw "Gateway configuration requires a PA Subnet." } } if (($ConfigData.Muxes.count -gt 0) -or ($ConfigData.Gateways.count -gt 0)) { $PASubnetBits = $ConfigData.PASubnet.Split("/")[1] } $DomainJoinUserNameDomain = $ConfigData.DomainJoinUserName.Split("\")[0] $DomainJoinUserNameName = $ConfigData.DomainJoinUserName.Split("\")[1] $LocalAdminDomainUserDomain = $ConfigData.LocalAdminDomainUser.Split("\")[0] $LocalAdminDomainUserName = $ConfigData.LocalAdminDomainUser.Split("\")[1] if ($null -eq $ConfigData.VMProcessorCount) {$ConfigData.VMProcessorCount = 8} if ($null -eq $ConfigData.VMMemory) {$ConfigData.VMMemory = 8GB} if ([string]::IsNullOrEmpty($ConfigData.PoolName)) {$ConfigData.PoolName = "DefaultAll"} write-SDNExpressLog "STAGE 1: Create VMs" $createparams = @{ 'ComputerName'=''; 'VMLocation'=$ConfigData.VMLocation; 'VMName'=''; 'VHDSrcPath'=$ConfigData.VHDPath; 'VHDName'=$ConfigData.VHDFile; 'VMMemory'=$ConfigData.VMMemory; 'VMProcessorCount'=$ConfigData.VMProcessorCount; 'Nics'=@(); 'CredentialDomain'=$DomainJoinUserNameDomain; 'CredentialUserName'=$DomainJoinUserNameName; 'CredentialPassword'=$DomainJoinPassword; 'JoinDomain'=$ConfigData.JoinDomain; 'LocalAdminPassword'=$LocalAdminPassword; 'DomainAdminDomain'=$LocalAdminDomainUserDomain; 'DomainAdminUserName'=$LocalAdminDomainUserName; 'SwitchName'=$ConfigData.SwitchName } if (![String]::IsNullOrEmpty($ConfigData.ProductKey)) { $createparams.ProductKey = $ConfigData.ProductKey } if (![String]::IsNullOrEmpty($ConfigData.Locale)) { $createparams.Locale = $ConfigData.Locale } if (![String]::IsNullOrEmpty($ConfigData.TimeZone)) { $createparams.TimeZone = $ConfigData.TimeZone } write-SDNExpressLog "STAGE 1.0.1: Enable VFP" foreach ($h in $ConfigData.hypervhosts) { write-SDNExpressLog "Adding net virt feature to $($h)" invoke-command -ComputerName $h -credential $credential { add-windowsfeature NetworkVirtualization -IncludeAllSubFeature -IncludeManagementTools } write-SDNExpressLog "Enabling VFP on $($h) $($ConfigData.SwitchName)" invoke-command -ComputerName $h -credential $credential { param( [String] $VirtualSwitchName ) Enable-VmSwitchExtension -VMSwitchName $VirtualSwitchName -Name "Microsoft Azure VFP Switch Extension" } -ArgumentList $ConfigData.SwitchName invoke-command -ComputerName $h -credential $credential { Set-Service -Name NCHostAgent -StartupType Automatic; Start-Service -Name NCHostAgent } } $HostNameIter = 0 if (-not $ConfigData.UseFCNC) { foreach ($NC in $ConfigData.NCs) { if ([string]::IsNullOrEmpty($nc.macaddress)) { $nc.macaddress = $ConfigData.SDNMacPoolStart $configdata.SDNMacPoolStart = GetNextMacAddress($ConfigData.SDNMacPoolStart) } if ([string]::IsNullOrEmpty($nc.HostName)) { $nc.HostName = $ConfigData.HyperVHosts[$HostNameIter] $HostNameIter = ($HostNameIter + 1) % $ConfigData.HyperVHosts.Count } } } foreach ($Mux in $ConfigData.Muxes) { if ([string]::IsNullOrEmpty($Mux.HostName)) { $Mux.HostName = $ConfigData.HyperVHosts[$HostNameIter] $HostNameIter = ($HostNameIter + 1) % $ConfigData.HyperVHosts.Count } if ([string]::IsNullOrEmpty($Mux.PAIPAddress)) { $Mux.PAIPAddress = $ConfigData.PAPoolStart $ConfigData.PAPoolStart = Get-IPAddressInSubnet -Subnet $ConfigData.PAPoolStart -Offset 1 } } #Allocate GW management MACs from outside of SDN pool foreach ($gateway in $ConfigData.Gateways) { if ([string]::IsNullOrEmpty($Gateway.macaddress)) { $gateway.macaddress = $ConfigData.SDNMacPoolStart $configdata.SDNMacPoolStart = GetNextMacAddress($ConfigData.SDNMacPoolStart) } if ([string]::IsNullOrEmpty($Gateway.HostName)) { $Gateway.HostName = $ConfigData.HyperVHosts[$HostNameIter] $HostNameIter = ($HostNameIter + 1) % $ConfigData.HyperVHosts.Count } } #Allocate GW FE & BE macs, FE IP from within SDN mac and PA pools $nextmac = $configdata.SDNMacPoolStart $PAOffset = 0 foreach ($gateway in $ConfigData.Gateways) { if ([string]::IsNullOrEmpty($Gateway.FrontEndMac)) { $gateway.FrontEndMac = $nextmac $nextmac = GetNextMacAddress($nextmac) } if ([string]::IsNullOrEmpty($Gateway.BackEndMac)) { $gateway.BackEndMac = $nextmac $nextmac = GetNextMacAddress($nextmac) } if ([string]::IsNullOrEmpty($Gateway.FrontEndIP)) { $Gateway.FrontEndIP = Get-IPAddressInSubnet -Subnet $ConfigData.PAPoolStart -Offset $PAOffset $PAOffset += 1 } } if (-not $ConfigData.UseFCNC) { write-SDNExpressLog "STAGE 1.1: Create NC VMs" foreach ($NC in $ConfigData.NCs) { $createparams.ComputerName=$NC.HostName; $createparams.VMName=$NC.ComputerName; if ([string]::IsNullOrEmpty($NC.ManagementIP)) { $createparams.Nics=@( @{Name="Management"; MacAddress=$NC.MacAddress; VLANID=$ConfigData.ManagementVLANID; SwitchName=$NC.ManagementSwitch} ) } else { $createparams.Nics=@( @{Name="Management"; MacAddress=$NC.MacAddress; IPAddress="$($NC.ManagementIP)/$ManagementSubnetBits"; Gateway=$ConfigData.ManagementGateway; DNS=$ConfigData.ManagementDNS; VLANID=$ConfigData.ManagementVLANID; SwitchName=$NC.ManagementSwitch} ) } $createparams.Roles=@("NetworkController","NetworkControllerTools") New-SDNExpressVM @createparams } } write-SDNExpressLog "STAGE 1.2: Create Mux VMs" foreach ($Mux in $ConfigData.Muxes) { $createparams.ComputerName=$mux.HostName; $createparams.VMName=$mux.ComputerName; if ([string]::IsNullOrEmpty($Mux.ManagementIP)) { $createparams.Nics=@( @{Name="Management"; MacAddress=$Mux.MacAddress; VLANID=$ConfigData.ManagementVLANID; SwitchName=$Mux.ManagementSwitch}, @{Name="HNVPA"; MacAddress=$Mux.PAMacAddress; IPAddress="$($Mux.PAIPAddress)/$PASubnetBits"; VLANID=$ConfigData.PAVLANID; IsMuxPA=$true} ) } else { $createparams.Nics=@( @{Name="Management"; MacAddress=$Mux.MacAddress; IPAddress="$($Mux.ManagementIP)/$ManagementSubnetBits"; Gateway=$ConfigData.ManagementGateway; DNS=$ConfigData.ManagementDNS; VLANID=$ConfigData.ManagementVLANID; SwitchName=$Mux.ManagementSwitch}, @{Name="HNVPA"; MacAddress=$Mux.PAMacAddress; IPAddress="$($Mux.PAIPAddress)/$PASubnetBits"; VLANID=$ConfigData.PAVLANID; IsMuxPA=$true} ) } $createparams.Roles=@("SoftwareLoadBalancer") New-SDNExpressVM @createparams } if ($ConfigData.NCs.count -gt 0 -or $ConfigData.UseFCNC) { write-SDNExpressLog "STAGE 2: Network Controller Configuration" $NCNodes = @() if ($ConfigData.UseFCNC) { if ([string]::IsNullOrEmpty($ConfigData.FCNCBins)) { $ConfigData.FCNCBins = "C:\Windows\NetworkController" } $NCNodes = $ConfigData.HyperVHosts $params = @{ 'Credential'=$Credential 'RestName'=$ConfigData.RestName 'RestIpAddress'=$ConfigData.RestIpAddress 'ComputerNames'=$NCNodes 'FCNCBins' = $ConfigData.FCNCBins 'FCNCDBs' = $ConfigData.FCNCDBs 'ClusterNetworkName' = $ConfigData.ClusterNetworkName } New-FCNCNetworkController @params } else { foreach ($NC in $ConfigData.NCs) { $NCNodes += $NC.ComputerName } WaitforComputerToBeReady -ComputerName $NCNodes -Credential $Credential $params = @{ 'Credential'=$Credential 'RestName'=$ConfigData.RestName 'RestIpAddress'=$ConfigData.RestIpAddress 'ComputerNames'=$NCNodes } if (![string]::IsNullOrEmpty($ConfigData.ManagementSecurityGroup)) { $params.ManagementSecurityGroupName = $ConfigData.ManagementSecurityGroup $params.ClientSecurityGroupName = $ConfigData.ClientSecurityGroup } New-SDNExpressNetworkController @params } write-SDNExpressLog "STAGE 2.1: Getting REST cert thumbprint in order to find it in local root store." $NCHostCertThumb = invoke-command -ComputerName $NCNodes[0] -Credential $credential { param( $RESTName, [String] $funcDefGetSdnCert ) . ([ScriptBlock]::Create($funcDefGetSdnCert)) $Cert = GetSdnCert -subjectName $RestName.ToUpper() return $cert.Thumbprint } -ArgumentList $ConfigData.RestName, $Global:fdGetSdnCert $NCHostCert = get-childitem "cert:\localmachine\root\$NCHostCertThumb" $params = @{ 'RestName' = $ConfigData.RestName; 'MacAddressPoolStart' = $ConfigData.SDNMacPoolStart; 'MacAddressPoolEnd' = $ConfigData.SDNMacPoolEnd; 'NCHostCert' = $NCHostCert 'NCUsername' = $ConfigData.NCUsername; 'NCPassword' = $NCPassword } New-SDNExpressVirtualNetworkManagerConfiguration @Params -Credential $Credential if (![string]::IsNullOrEmpty($ConfigData.PASubnet)) { $params = @{ 'RestName' = $ConfigData.RestName; 'AddressPrefix' = $ConfigData.PASubnet; 'VLANID' = $ConfigData.PAVLANID; 'DefaultGateways' = $ConfigData.PAGateway; 'IPPoolStart' = $ConfigData.PAPoolStart; 'IPPoolEnd' = $ConfigData.PAPoolEnd } Add-SDNExpressVirtualNetworkPASubnet @params -Credential $Credential } else { write-SDNExpressLog "PA subnets not specified in configuration, skipping Virtual Network PA configuration." } } else { $NCHostCert = GetSdnCert -subjectName $configdata.RestName -store "cert:\localmachine\root" if ($null -eq $NCHostCert) { $ErrorText = "Network Controller cert with CN=$($configdata.RestName) not found on $(hostname) in cert:\localmachine\root" write-SDNExpressLog $ErrorText throw $ErrorText } } if ($ConfigData.Muxes.Count -gt 0) { write-SDNExpressLog "STAGE 3: SLB Configuration" if (![string]::IsNullOrEmpty($ConfigData.PrivateVIPSubnet)) { $params = @{ 'RestName' = $ConfigData.RestName; 'PrivateVIPPrefix' = $ConfigData.PrivateVIPSubnet; 'PublicVIPPrefix' = $ConfigData.PublicVIPSubnet } New-SDNExpressLoadBalancerManagerConfiguration @Params -Credential $Credential } else { write-SDNExpressLog "VIP subnets not specified in configuration, skipping load balancer manager configuration." } WaitforComputerToBeReady -ComputerName $ConfigData.Muxes.ComputerName -Credential $Credential foreach ($Mux in $ConfigData.muxes) { Add-SDNExpressMux -ComputerName $Mux.ComputerName -PAMacAddress $Mux.PAMacAddress -PAGateway $ConfigData.PAGateway -LocalPeerIP $Mux.PAIPAddress -MuxASN $ConfigData.SDNASN -Routers $ConfigData.Routers -RestName $ConfigData.RestName -NCHostCert $NCHostCert -Credential $Credential } } write-SDNExpressLog "STAGE 4: Host Configuration" $params = @{} if (![string]::IsNullOREmpty($ConfigData.PASubnet)) { $params.HostPASubnetPrefix = $ConfigData.PASubnet; } foreach ($h in $ConfigData.hypervhosts) { if($ConfigData.Port -ne $null -and $ConfigData.Port -ne 0) { write-SDNExpressLog "Using port $($ConfigData.Port) for host $h" $params.Port = $ConfigData.Port } Add-SDNExpressHost @params -ComputerName $h ` -RestName $ConfigData.RestName ` -NCHostCert $NCHostCert ` -Credential $Credential ` -VirtualSwitchName $ConfigData.SwitchName } if ($ConfigData.Gateways.Count -gt 0) { write-SDNExpressLog "STAGE 5.1: Create Gateway VMs" foreach ($Gateway in $ConfigData.Gateways) { $params = @{ 'RestName'=$ConfigData.RestName 'ComputerName'=$gateway.computername 'HostName'=$gateway.Hostname 'JoinDomain'=$ConfigData.JoinDomain 'FrontEndLogicalNetworkName'='HNVPA' 'FrontEndAddressPrefix'=$ConfigData.PASubnet } $Result = Initialize-SDNExpressGateway @params -Credential $Credential $Gateway.FrontEndMac = $Result.FrontEndMac $Gateway.FrontEndIP = $Result.FrontEndIP $Gateway.BackEndMac = $Result.BackEndMac $createparams.ComputerName=$Gateway.HostName; $createparams.VMName=$Gateway.ComputerName; if ([string]::IsNullOrEmpty($Gateway.ManagementIP)) { $createparams.Nics=@( @{Name="Management"; MacAddress=$Gateway.MacAddress; VLANID=$ConfigData.ManagementVLANID; SwitchName=$Mux.ManagementSwitch} @{Name="FrontEnd"; MacAddress=$Gateway.FrontEndMac; IPAddress="$($Gateway.FrontEndIp)/$PASubnetBits"; VLANID=$ConfigData.PAVLANID}, @{Name="BackEnd"; MacAddress=$Gateway.BackEndMac; VLANID=$ConfigData.PAVLANID} ); } else { $createparams.Nics=@( @{Name="Management"; MacAddress=$Gateway.MacAddress; IPAddress="$($Gateway.ManagementIP)/$ManagementSubnetBits"; Gateway=$ConfigData.ManagementGateway; DNS=$ConfigData.ManagementDNS; VLANID=$ConfigData.ManagementVLANID; SwitchName=$Mux.ManagementSwitch} @{Name="FrontEnd"; MacAddress=$Gateway.FrontEndMac; IPAddress="$($Gateway.FrontEndIp)/$PASubnetBits"; VLANID=$ConfigData.PAVLANID}, @{Name="BackEnd"; MacAddress=$Gateway.BackEndMac; VLANID=$ConfigData.PAVLANID} ); } $createparams.Roles=@("RemoteAccess", "RemoteAccessServer", "RemoteAccessMgmtTools", "RemoteAccessPowerShell", "RasRoutingProtocols", "Web-Application-Proxy") New-SDNExpressVM @createparams } write-SDNExpressLog "STAGE 5.3: Configure Gateways" if ([String]::IsNullOrEmpty($ConfigData.RedundantCount)) { $ConfigData.RedundantCount = 1 } if ([string]::IsNullOrEmpty($configdata.GatewayPoolType) -or ($configdata.GatewayPoolType -eq "All")) { write-SDNExpressLog "Gateway pool type is All." New-SDNExpressGatewayPool -IsTypeAll -PoolName $ConfigData.PoolName -Capacity $ConfigData.Capacity -GreSubnetAddressPrefix $ConfigData.GreSubnet -RestName $ConfigData.RestName -Credential $Credential -RedundantCount $ConfigData.RedundantCount } elseif ($configdata.GatewayPoolType -eq "GRE") { write-SDNExpressLog "Gateway pool type is GRE." New-SDNExpressGatewayPool -IsTypeGRE -PoolName $ConfigData.PoolName -Capacity $ConfigData.Capacity -GreSubnetAddressPrefix $ConfigData.GreSubnet -RestName $ConfigData.RestName -Credential $Credential -RedundantCount $ConfigData.RedundantCount } elseif ($configdata.GatewayPoolType -eq "Forwarding") { write-SDNExpressLog "Gateway pool type is Forwarding." New-SDNExpressGatewayPool -IsTypeForwarding -PoolName $ConfigData.PoolName -Capacity $ConfigData.Capacity -RestName $ConfigData.RestName -Credential $Credential -RedundantCount $ConfigData.RedundantCount } elseif ($configdata.GatewayPoolType -eq "IPSec") { write-SDNExpressLog "Gateway pool type is IPSec." New-SDNExpressGatewayPool -IsTypeIPSec -PoolName $ConfigData.PoolName -Capacity $ConfigData.Capacity -RestName $ConfigData.RestName -Credential $Credential -RedundantCount $ConfigData.RedundantCount } else { write-SDNExpressLog "Gateway pool type is Invalid." throw "Invalid GatewayPoolType specified in config file." } WaitforComputerToBeReady -ComputerName $ConfigData.Gateways.ComputerName -Credential $Credential foreach ($G in $ConfigData.Gateways) { $params = @{ 'RestName'=$ConfigData.RestName 'ComputerName'=$g.computername 'HostName'=$g.Hostname 'NCHostCert'= $NCHostCert 'PoolName'=$ConfigData.PoolName 'FrontEndIp'=$G.FrontEndIP 'FrontEndLogicalNetworkName'='HNVPA' 'FrontEndAddressPrefix'=$ConfigData.PASubnet 'FrontEndMac'=$G.FrontEndMac 'BackEndMac'=$G.BackEndMac 'Routers'=$ConfigData.Routers 'PAGateway'=$ConfigData.PAGateway 'ManagementRoutes'=$ConfigData.ManagementRoutes 'LocalASN'=$ConfigData.SDNASN } if ($ConfigData.UseGatewayFastPath -eq $true) { New-SDNExpressGateway @params -Credential $Credential -UseFastPath } else { New-SDNExpressGateway @params -Credential $Credential } } } test-sdnexpresshealth -restname $ConfigData.RestName -Credential $Credential } catch { $pscmdlet.throwterminatingerror($PSItem) } write-SDNExpressLog "SDN Express deployment complete." |