internal/Invoke-RobocopyParser.ps1
|
Function Invoke-RobocopyParser { <# .SYNOPSIS Parse Robocopy.exe output .DESCRIPTION This function will try and parse the output from when you run Robocopy.exe and give you information about what PowerShell stream should be used. .EXAMPLE PS$ > #> [CmdletBinding()] PARAM ( # Robocopy text [Parameter(ValueFromPipeline = $true)] [String] $InputObject ) begin { # We have a corresponding $endtime to measure how long the code ran for $StartTime = $(Get-Date) # Regex for catching all text that will be sent to Error Stream $ErrorFilter = @( "\*\*\*\*\* You need these to perform Backup copies \(\/B or \/ZB\).", "ERROR \d{1,3} \(0x\d{1,11}\)", "ERROR : *" ) -join '|' # Regex for catching all text that will be sent to Warning Stream $WarningFilter = @( "Waiting $Wait seconds... Retrying..." ) -join '|' # Regex filter used for finding strings we want to handle in Robocopy output. This is also used when we find specific strings in the output [regex] $HeaderRegex = '\s+Total\s*Copied\s+Skipped\s+Mismatch\s+FAILED\s+Extras' [regex] $DirLineRegex = 'Dirs\s*:\s*(?<DirCount>\d+)(?:\s+\d+){3}\s+(?<DirFailed>\d+)\s+\d+' [regex] $FileLineRegex = 'Files\s*:\s*(?<FileCount>\d+)(?:\s+\d+){3}\s+(?<FileFailed>\d+)\s+\d+' [regex] $BytesLineRegex = 'Bytes\s*:\s*(?<ByteCount>\d+)(?:\s+\d+){3}\s+(?<BytesFailed>\d+)\s+\d+' [regex] $TimeLineRegex = 'Times\s*:\s*(?<TimeElapsed>\d+).*' [regex] $EndedLineRegex = 'Ended\s*:\s*(?<EndedTime>.+)' [regex] $SpeedLineRegex = 'Speed\s:\s+(\d+)\sBytes\/sec' [regex] $JobSummaryEndLineRegex = '[-]{78}' [regex] $SpeedInMinutesRegex = 'Speed\s:\s+(\d+).(\d+)\sMegaBytes\/min' } Process { If ($InputObject -match $ErrorFilter -or $ForceNextLineIntoError -eq $true) { If ($null -eq $Message) { $Message = $inputobject $ForceNextLineIntoError = $true } else { $LastMessage = ("{0}. {1}" -f $Message, $inputobject.trim()) $ForceNextLineIntoError = $false $Message = $null $SplitMessage = $LastMessage -split '(ERROR \d \(0x\d{1,11}\) )' [PSCustomObject]@{ Value = $LastMessage Stream = "Error" Exception = $SplitMessage[2] ErrorID = $SplitMessage[1] } } } ElseIf ($InputObject -like "*$Source*") { $Line = $InputObject.Trim().Split("`t") $Size, [datetime]$TimeStamp = $line[2].Trim().Split(" ", 2) # Trimming and splitting on this line instead of in Write-Verbose for readability $ExtensionSplit = ($Line[3]).Split(".") [PSCustomObject]@{ Extension = if ($ExtensionSplit.count -gt 1) { $ExtensionSplit[-1] } else { } Name = $line[3].Split("\")[-1] FullName = $line[3] Length = $Size TimeStamp = $TimeStamp Status = $line[0].Trim() Stream = "Verbose" } } ElseIf ($InputObject -match "$HeaderRegex|$DirLineRegex|$FileLineRegex|$BytesLineRegex|$TimeLineRegex|$EndedLineRegex|$SpeedLineRegex|$JobSummaryEndLineRegex|$SpeedInMinutesRegex") { # Some we will just assign to variables and dont use or dont do anything with Switch -Regex ($inputobject) { $JobSummaryEndLine { } $HeaderRegex { } $DirLineRegex { $TotalDirs, $TotalDirCopied, $TotalDirIgnored, $TotalDirMismatched, $TotalDirFailed, $TotalDirExtra = $PSitem | Select-String -Pattern '\d+' -AllMatches | ForEach-Object { $PSitem.Matches } | ForEach-Object { $PSitem.Value } } $FileLineRegex { $TotalFiles, $TotalFileCopied, $TotalFileIgnored, $TotalFileMismatched, $TotalFileFailed, $TotalFileExtra = $PSitem | Select-String -Pattern '\d+' -AllMatches | ForEach-Object { $PSitem.Matches } | ForEach-Object { $PSitem.Value } } $BytesLineRegex { $TotalBytes, $TotalBytesCopied, $TotalBytesIgnored, $TotalBytesMismatched, $TotalBytesFailed, $TotalBytesExtra = $PSitem | Select-String -Pattern '\d+' -AllMatches | ForEach-Object { $PSitem.Matches } | ForEach-Object { $PSitem.Value } } $TimeLineRegex { [TimeSpan]$TotalDuration, [TimeSpan]$CopyDuration, [TimeSpan]$FailedDuration, [TimeSpan]$ExtraDuration = $PSitem | Select-String -Pattern '\d?\d\:\d{2}\:\d{2}' -AllMatches | ForEach-Object { $PSitem.Matches } | ForEach-Object { $PSitem.Value } } $EndedLineRegex { } $SpeedLineRegex { $TotalSpeedBytes, $null = $PSitem | Select-String -Pattern '\d+' -AllMatches | ForEach-Object { $PSitem.Matches } | ForEach-Object { $PSitem.Value } } $SpeedInMinutesRegex { } } } elseif ($InputObject -match $WarningFilter) { Write-Warning $inputobject [PSCustomObject]@{ Value = $InputObject Stream = "Warning" } } ElseIf ($InputObject) { # Write all strings to Information stream that we dont have rules for [PSCustomObject]@{ Value = $InputObject Stream = "Information" } } } end { # Exit Code lookup "table" $LastExitCodeMessage = switch ($LASTEXITCODE) { 0 { '[SUCCESS]No files were copied. No failure was encountered. No files were mismatched. The files already exist in the destination directory; therefore, the copy operation was skipped.' } 1 { '[SUCCESS]All files were copied successfully.' } 2 { '[SUCCESS]There are some additional files in the destination directory that are not present in the source directory. No files were copied.' } 3 { '[SUCCESS]Some files were copied. Additional files were present. No failure was encountered.' } 4 { '[WARNING]Some Mismatched files or directories were detected. Examine the output log. Housekeeping might be required.' } 5 { '[WARNING]Some files were copied. Some files were mismatched. No failure was encountered.' } 6 { '[WARNING]Additional files and mismatched files exist. No files were copied and no failures were encountered. This means that the files already exist in the destination directory.' } 7 { '[WARNING]Files were copied, a file mismatch was present, and additional files were present.' } 8 { '[ERROR]Several files did not copy.(copy errors occurred and the retry limit was exceeded). Check these errors further.' } 9 { '[ERROR]Some files did copy, but copy errors occurred and the retry limit was exceeded. Check these errors further.' } 10 { '[ERROR]Copy errors occurred and the retry limit was exceeded. Some Extra files or directories were detected.' } 11 { '[ERROR]Some files were copied. Copy errors occurred and the retry limit was exceeded. Some Extra files or directories were detected.' } 12 { '[ERROR]Copy errors occurred and the retry limit was exceeded. Some Mismatched files or directories were detected.' } 13 { '[ERROR]Some files were copied. Copy errors occurred and the retry limit was exceeded. Some Mismatched files or directories were detected.' } 14 { '[ERROR]Copy errors occurred and the retry limit was exceeded. Some Mismatched files or directories were detected. Some Extra files or directories were detected.' } 15 { '[ERROR]Some files were copied. Copy errors occurred and the retry limit was exceeded. Some Mismatched files or directories were detected. Some Extra files or directories were detected.' } 16 { '[ERROR]Robocopy did not copy any files. Either a usage error or an error due to insufficient access privileges on the source or destination directories.' } default { '[WARNING]No message associated with this exit code. ExitCode: {0}' -f $LASTEXITCODE } } # We have a corresponding $starttime to measure how long the code ran for $endtime = $(Get-Date) If ($Unit) { $FormatSpeedSplatting = @{ Unit = $Unit } } Else { $FormatSpeedSplatting = @{ Unit = 'Auto' } } [PSCustomObject]@{ 'Source' = [System.IO.DirectoryInfo]$Source 'Destination' = [System.IO.DirectoryInfo]$Destination 'Command' = 'Robocopy.exe ' + $RoboArgs -join " " 'DirCount' = [int]$TotalDirs 'FileCount' = [int]$TotalFiles #'Duration' = $TotalDuration 'DirCopied' = [int]$TotalDirCopied 'FileCopied' = [int]$TotalFileCopied #'CopyDuration' = $CopyDuration 'DirIgnored' = [int]$TotalDirIgnored 'FileIgnored' = [int]$TotalFileIgnored 'DirMismatched' = [int]$TotalDirMismatched 'FileMismatched' = [int]$TotalFileMismatched 'DirFailed' = [int]$TotalDirFailed 'FileFailed' = [int]$TotalFileFailed #'FailedDuration' = $FailedDuration 'DirExtra' = [int]$TotalDirExtra 'FileExtra' = [int]$TotalFileExtra #'ExtraDuration' = $ExtraDuration 'TotalTime' = "{0:HH:mm:ss}" -f ([datetime]$($endtime - $StartTime).Ticks) 'StartedTime' = [datetime]$StartTime 'EndedTime' = [datetime]$endTime 'TotalSize' = (Format-SpeedHumanReadable $Totalbytes @FormatSpeedSplatting) 'TotalSizeCopied' = (Format-SpeedHumanReadable $TotalBytesCopied @FormatSpeedSplatting) 'TotalSizeIgnored' = (Format-SpeedHumanReadable $TotalBytesIgnored @FormatSpeedSplatting) 'TotalSizeMismatched' = (Format-SpeedHumanReadable $TotalBytesMismatched @FormatSpeedSplatting) 'TotalSizeFailed' = (Format-SpeedHumanReadable $TotalBytesFailed @FormatSpeedSplatting) 'TotalSizeExtra' = (Format-SpeedHumanReadable $TotalBytesExtra @FormatSpeedSplatting) 'Speed' = (Format-SpeedHumanReadable $TotalSpeedBytes @FormatSpeedSplatting) + '/s' 'ExitCode' = $LASTEXITCODE 'Success' = If ($LASTEXITCODE -lt 8) { $true } else { $false } 'LastExitCodeMessage' = [string]$LastExitCodeMessage } } } |