functions/Invoke-RoboCopy.ps1
|
Function Invoke-RoboCopy { <# .SYNOPSIS Invoke Robocopy with PowerShell .DESCRIPTION See https://technet.microsoft.com/en-us/library/cc733145(v=ws.11).aspx for an extensive documentation on Robocopy switches. Some parameters are in use by the function: /bytes /TEE /np /njh /fp /v /ndl /ts. .PARAMETER Confirm Prompts you for confirmation before running the function. .PARAMETER WhatIf Shows what would happen if the function runs. The function is not run. .EXAMPLE PS$ > Invoke-RoboCopy -Source "E:\Google Drive\Script Library" -Destination G:\Temp\ -Recurse -Unit Bytes Source : E:\Google Drive\Script Library Destination : G:\Temp\ Command : Robocopy.exe "E:\Google Drive\Script Library" "G:\Temp" *.* /r:3 /w:3 /e /bytes /TEE /np /njh /fp /v /ndl /ts DirCount : 589 FileCount : 1220 DirCopied : 588 FileCopied : 1220 DirIgnored : 1 FileIgnored : 0 DirMismatched : 0 FileMismatched : 0 DirFailed : 0 FileFailed : 0 DirExtra : 0 FileExtra : 1 TotalTime : 00:00:02 StartedTime : 7/16/2019 10:03:28 PM EndedTime : 7/16/2019 10:03:30 PM TotalSize : 18839977 B TotalSizeCopied : 18839977 B TotalSizeIgnored : 0 B TotalSizeMismatched : 0 B TotalSizeFailed : 0 B TotalSizeExtra : 557048280 B Speed : 12957343 B/s ExitCode : 3 Success : True LastExitCodeMessage : [SUCCESS]Some files were copied. Additional files were present. No failure was encountered. .NOTES Original script by Keith S. Garner (KeithGa@KeithGa.com) - 6/23/2014 Originally posted on https://keithga.wordpress.com/2014/06/23/copy-itemwithprogress With inspiration by Trevor Sullivan @pcgeek86 https://stackoverflow.com/a/21209726 Updated by Ninjigen - 01/08/2018 https://github.com/Ninjigen/PowerShell/tree/master/Robocopy #> [CmdletBinding(SupportsShouldProcess)] Param ( # Specifies the path to the source directory. Must be a folder. [Parameter( Mandatory = $True, ValueFromPipelineByPropertyName, ValueFromPipeline)] [Alias('Path', 'FullPath')] [String]$Source, # Specifies the path to the destination directory. Must be a folder. [Parameter( Mandatory = $True, ValueFromPipelineByPropertyName, ValueFromPipeline)] [Alias('Target')] [String]$Destination, # Specifies the file or files to be copied. You can use wildcard characters (* or ?), if you want. If the File parameter is not specified, *.* is used as the default value. [Parameter(Mandatory = $False)] [String[]] $Files = '*.*', # Writes the status output to the log file (overwrites the existing log file). [Parameter(Mandatory = $False)] [String]$LogFile, # Copies subdirectories. Note that this option excludes empty directories. [Parameter(ParameterSetName = 'IncludeSubDirectories')] [Alias('s')] [switch]$IncludeSubDirectories, # Copies subdirectories. Note that this option includes empty directories. [Parameter(ParameterSetName = 'IncludeEmptySubDirectories')] [Alias('e', 'Recurse')] [switch]$IncludeEmptySubDirectories, # Copies only the top N levels of the source directory tree. [Parameter(Mandatory = $False)] [Alias('lev', 'Depth')] [Int]$Level, # Copies files in Backup mode. [Alias('b')] [switch]$BackupMode, # Copies files in restartable mode. [Alias('z')] [switch]$RestartMode, # Copies all encrypted files in EFS RAW mode. [switch]$EFSRaw, # Specifies the file properties to be copied. The default value for CopyFlags is DAT (data, attributes, and time stamps). D = Data. A = Attributes. T = Time stamps.S = NTFS access control list (ACL). O =Owner information. U = Auditing information [Parameter(Mandatory = $False)] [Alias('copy')] [ValidateSet('D', 'A', 'T', 'S', 'O', 'U')] [String[]]$CopyFlags, # Copies no file information. [switch]$NoCopy, # Fixes file security on all files, even skipped ones. [Alias('secfix')] [switch]$SecurityFix, # Fixes file times on all files, even skipped ones. [Alias('timfix')] [switch]$Timefix, # Deletes destination files and directories that no longer exist in the source. [switch]$Purge, # Mirrors a directory tree [Parameter(ParameterSetName = 'Mirror')] [Alias('mir', 'Sync')] [switch]$Mirror, # Moves files, recursively, and deletes them from the source after they are copied. Folders will still be in source directory. [Parameter(ParameterSetName = 'MoveFiles')] [Alias('mov')] [switch]$MoveFiles, # Moves files and directories, and deletes them from the source after they are copied. [Parameter(ParameterSetName = 'MoveFilesAndDirectories')] [Alias('move')] [switch]$MoveFilesAndDirectories, # Adds the specified attributes to copied files. [Parameter(Mandatory = $False)] [ValidateSet('R', 'A', 'S', 'H','C', 'N', 'E', 'T')] [String[]]$AddAttribute, # Removes the specified attributes from copied files. [Parameter(Mandatory = $False)] [ValidateSet('R', 'A', 'S', 'H','C', 'N', 'E', 'T')] [String[]]$RemoveAttribute, # Creates a directory tree and zero-length files only. [switch]$Create, # Creates destination files by using 8.3 character-length FAT file names only. [switch]$FAT, # Turns off support for very long paths. [Alias('256')] [switch]$IgnoreLongPath, # Monitors the source, and runs again when more than N changes are detected. [Parameter(Mandatory = $False)] [Alias('mon')] [Int]$MonitorChanges, # Monitors source, and runs again in M minutes if changes are detected. [Parameter(Mandatory = $False)] [Alias('mot')] [Int]$MonitorMinutes, # Creates multi-threaded copies with N threads. N must be an integer between 1 and 128. Cannot be used with the InterPacketGap and EFSRAW parameters. The /MT parameter applies to Windows Server 2008 R2 and Windows 7. [Parameter(Mandatory = $False)] [Alias('MT')] [string]$Threads, # Specifies run times when new copies may be started. [Parameter(Mandatory = $False)] [Alias('rh')] [ValidatePattern("[0-2]{1}[0-3]{1}[0-5]{1}[0-9]{1}-[0-2]{1}[0-3]{1}[0-5]{1}[0-9]{1}")] [String]$RunTimes, # Checks run times on a per-file (not per-pass) basis. [Alias('pf')] [switch]$UsePerFileRunTimes, # Specifies the inter-packet gap to free bandwidth on slow lines. [Parameter(Mandatory = $False)] [Alias('ipg')] [Int]$InterPacketGap, # Follows the symbolic link and copies the target. [Alias('sl')] [switch]$SymbolicLink, # Copies only files for which the Archive attribute is set. [Alias('a')] [switch]$Archive, # Copies only files for which the Archive attribute is set, and resets the Archive attribute. [Alias('m')] [switch]$ResetArchiveAttribute, # Includes only files for which any of the specified attributes are set. [Parameter(Mandatory = $False)] [Alias('ia')] [ValidateSet('R', 'A', 'S','C' ,'H', 'N', 'E', 'T', 'O')] [String[]]$IncludeAttribute, # Excludes files for which any of the specified attributes are set. [Parameter(Mandatory = $False)] [ValidateSet('R', 'A', 'S','C' ,'H', 'N', 'E', 'T', 'O')] [Alias('xa')] [String[]]$ExcludeAttribute, # Excludes files that match the specified names or paths. Note that FileName can include wildcard characters (* and ?). [Parameter(Mandatory = $False)] [Alias('xf')] [String[]]$ExcludeFileName, # Excludes directories that match the specified names and paths. [Parameter(Mandatory = $False)] [Alias('xd')] [String[]]$ExcludeDirectory, # Excludes changed files. [Alias('xct')] [switch]$ExcludeChangedFiles, # Excludes newer files. [Alias('xn')] [switch]$ExcludeNewerFiles, # Excludes older files. [Alias('xo')] [switch]$ExcludeOlderFiles, # Excludes extra files and directories. [Alias('xx')] [switch]$ExcludeExtraFiles, # Excludes "lonely" files and directories. [Alias('xl')] [switch]$ExcludeLonelyFiles, # Includes the same files. [Alias('is')] [switch]$IncludeSameFiles, # Includes "tweaked" files. [Alias('it')] [switch]$IncludeTweakedFiles, # Specifies the maximum file size (to exclude files bigger than N bytes). [Parameter(Mandatory = $False)] [Alias('max')] [String]$MaximumFileSize, # Specifies the minimum file size (to exclude files smaller than N bytes). [Parameter(Mandatory = $False)] [Alias('min')] [String]$MinimumFileSize, # Specifies the maximum file age (to exclude files older than N days or date). [Parameter(Mandatory = $False)] [Alias('maxage')] [String]$MaximumFileAge, # Specifies the minimum file age (exclude files newer than N days or date). [Parameter(Mandatory = $False)] [Alias('minage')] [String]$MinimumFileAge, # Specifies the maximum last access date (excludes files unused since N). [Parameter(Mandatory = $False)] [Alias('maxlad')] [String]$MaximumFileLastAccessDate, # Specifies the minimum last access date (excludes files used since N) If N is less than 1900, N specifies the number of days. Otherwise, N specifies a date in the format YYYYMMDD. [Parameter(Mandatory = $False)] [Alias('minlad')] [String]$MinimumFileLastAccessDate, # Excludes junction points, which are normally included by default. [Alias('xj')] [switch]$ExcludeJunctionPoints, # Excludes junction points for files. [Alias('xjf')] [switch]$ExcludeFileJunctionPoints, # Excludes junction points for directories. [Alias('xjd')] [switch]$ExcludeDirectoryJunctionPoints, # Assumes FAT file times (two-second precision). [Alias('fft')] [switch]$AssumeFATFileTime, # Compensates for one-hour DST time differences. [Alias('dst')] [switch]$CompensateDST, # Specifies the number of retries on failed copies. Default is 3. [Alias('r')] [int]$Retry = 3, # Specifies the wait time between retries, in seconds. The default value of N is 3. [Alias('w')] [int]$Wait = 3, # Saves the values specified in the /r and /w options as default settings in the registry. [Alias('reg')] [switch]$SaveRetrySettings, # Specifies that the system will wait for share names to be defined (retry error 67). [Alias('tbd')] [switch]$WaitForShareName, # What unit the sizes are shown as [ValidateSet('Auto', 'PB', 'TB', 'GB', 'MB', 'KB', 'Bytes')] [String]$Unit = 'Auto', # Specifies that files are to be listed only (and not copied, deleted, or time stamped). [Alias('l')] [Switch]$List ) Process { # Remove trailing backslash because Robocopy can sometimes error out when spaces are in path names $ModifiedSource = $Source -replace '\\$' $ModifiedDestination = $Destination -replace '\\$' # We place "" so we can use spaces in path names $ModifiedSource = '"' + $ModifiedSource + '"' $ModifiedDestination = '"' + $ModifiedDestination + '"' # RobocopyArguments are not the final variable that countain all robocopy parameters $RobocopyArguments = $ModifiedSource, $ModifiedDestination + $Files # We add wait and retry with the default from their parameters, else Robocopy will try a million time before time out $RobocopyArguments += '/r:' + $Retry $RobocopyArguments += '/w:' + $Wait if ($IncludeSubDirectories) { $RobocopyArguments += '/s'; $action = 'Copy' } if ($IncludeEmptySubDirectories) { $RobocopyArguments += '/e'; $action = 'Copy' } If ($LogFile) { $RobocopyArguments += '/log:' + $LogFile } if ($Level) { $RobocopyArguments += '/lev:' + $Level } if ($BackupMode) { $RobocopyArguments += '/b' } if ($RestartMode) { $RobocopyArguments += '/z' } if ($EFSRaw) { $RobocopyArguments += '/efsraw' } if ($CopyFlags) { $RobocopyArguments += '/copy:' + (($CopyFlags | Sort-Object -Unique) -join '') } if ($NoCopy) { $RobocopyArguments += '/nocopy' } if ($SecurityFix) { $RobocopyArguments += '/secfix' } if ($Timefix) { $RobocopyArguments += '/timfix' } if ($Purge) { $RobocopyArguments += '/purge' ; $action = 'Purge' } if ($Mirror) { $RobocopyArguments += '/mir'; $action = 'Mirror' } if ($MoveFiles) { $RobocopyArguments += '/mov'; $action = 'Move' } if ($MoveFilesAndDirectories) { $RobocopyArguments += '/move' ; $action = 'Move' } if ($AddAttribute) { $RobocopyArguments += '/a+:' + (($AddAttribute | Sort-Object -Unique) -join '') } if ($RemoveAttribute) { $RobocopyArguments += '/a-:' + (($RemoveAttribute | Sort-Object -Unique) -join '') } if ($Create) { $RobocopyArguments += '/create' } if ($fat) { $RobocopyArguments += '/fat' } if ($IgnoreLongPath) { $RobocopyArguments += '/256' } if ($MonitorChanges) { $RobocopyArguments += '/mon:' + $MonitorChanges } if ($MonitorMinutes) { $RobocopyArguments += '/mot:' + $MonitorMinutes } if ($Threads) { $RobocopyArguments += '/MT:' + $Threads } if ($RunTimes) { $RobocopyArguments += '/rh:' + $RunTimes } if ($UsePerFileRunTimes) { $RobocopyArguments += '/pf' } if ($InterPacketGap) { $RobocopyArguments += '/ipg:' + $InterPacketGap } if ($SymbolicLink) { $RobocopyArguments += '/sl' } if ($Archive) { $RobocopyArguments += '/a' } if ($ResetArchiveAttribute) { $RobocopyArguments += '/m' } if ($IncludeAttribute) { $RobocopyArguments += '/ia:' + ($IncludeAttribute | Sort-Object -Unique) -join '' } if ($ExcludeAttribute) { $RobocopyArguments += '/xa:' + ($ExcludeAttribute | Sort-Object -Unique) -join '' } if ($ExcludeFileName) { $RobocopyArguments += '/xf ' + ($ExcludeFileName | ForEach-Object { '"' + $_ + '"' }) -join ' '} if ($ExcludeDirectory) { $RobocopyArguments += '/xd ' + ($ExcludeDirectory | ForEach-Object { '"' + $_ + '"' }) -join ' '} if ($ExcludeChangedFiles) { $RobocopyArguments += '/xct' } if ($ExcludeNewerFiles) { $RobocopyArguments += '/xn' } if ($ExcludeOlderFiles) { $RobocopyArguments += '/xo' } if ($ExcludeExtraFiles) { $RobocopyArguments += '/xx' } if ($ExcludeLonelyFiles) { $RobocopyArguments += '/xl' } if ($IncludeSameFiles) { $RobocopyArguments += '/is' } if ($IncludeTweakedFiles) { $RobocopyArguments += '/it' } if ($MaximumFileSize) { $RobocopyArguments += '/max:' + $MaximumFileSize } if ($MinimumFileSize) { $RobocopyArguments += '/min:' + $MinimumFileSize } if ($MaximumFileAge) { $RobocopyArguments += '/maxage:' + $MaximumFileAge } if ($MinimumFileAge) { $RobocopyArguments += '/minage:' + $MinimumFileAge } if ($MaximumFileLastAccessDate) { $RobocopyArguments += '/maxlad:' + $MaximumFileLastAccessDate } if ($MinimumFileLastAccessDate) { $RobocopyArguments += '/minlad:' + $MinimumFileLastAccessDate } if ($ExcludeJunctionPoints) { $RobocopyArguments += '/xj' } if ($ExcludeFileJunctionPoints) { $RobocopyArguments += '/xjf' } if ($ExcludeDirectoryJunctionPoints) { $RobocopyArguments += '/xjd' } if ($AssumeFATFileTime) { $RobocopyArguments += '/fft' } if ($CompensateDST) { $RobocopyArguments += '/dst' } if ($SaveRetrySettings) { $RobocopyArguments += '/reg' } if ($WaitForShareName) { $RobocopyArguments += '/tbd' } If ($List) { $RobocopyArguments += '/l' ; $action = 'List' } # Reason why ShouldProcess is this far down is because $action is not set before this part If ($PSCmdlet.ShouldProcess("$Destination from $Source" , $action)) { if (-not (Get-Command -Name robocopy -ErrorAction SilentlyContinue)) { Write-Warning -Message "Action failed because robocopy.exe could not be found." break } # Arguments of the copy command. Fills in the $RoboLog temp file $RoboArgs = $RobocopyArguments + "/bytes /TEE /np /njh /fp /v /ndl /ts" -split " " #region All Logic for the robocopy process is handled here. Including what to do with the output etc. Robocopy.exe $RoboArgs | Where-Object { $PSItem -ne "" } | Invoke-RobocopyParser | & { process { If ($psitem.stream -eq "Verbose") { Write-Verbose -Message ('"{0} File" on "Item {1}" to target "{2}" Status on Item "{3}". Length on Item "{4}". TimeStamp on Item "{5}"' -f $action, $psitem.FullName , $Destination, $psitem.status, $psitem.length, $psitem.TimeStamp) } ElseIf ($psitem.stream -eq "Error") { If ($psitem.exception) { $Exception = [Exception]::new($psitem.exception) } Else { $Exception = [Exception]::new($psitem.Value) } $ErrorRecord = [System.Management.Automation.ErrorRecord]::new( $Exception, $Psitem.ErrorID, [System.Management.Automation.ErrorCategory]::NotSpecified, $TargetObject # usually the object that triggered the error, if possible ) $PSCmdlet.WriteError($ErrorRecord) } ElseIf ($psitem.stream -eq "Warning") { Write-Warning $psitem.value } ElseIf ($psitem.stream -eq "Information") { Write-Information $psitem } Else { # This will output the pscustomobject with information as source, destination, success and more $Psitem } } } } } } |