SampleScripts/dri/driConfigureSupervisorCluster.ps1
|
# Copyright 2023-2024 Broadcom. All Rights Reserved. # SPDX-License-Identifier: BSD-2 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE # WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR # COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR # OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. <# .NOTES =================================================================================================================== Created by: Gary Blake - Senior Staff Solutions Architect Creation Date: 2022-03-23 =================================================================================================================== .CHANGELOG - 1.1.000 (Gary Blake / 2022-10-03) - Added support for VCF 4.5.x Planning and Prep Workbook - Enhanced Signed Certificate Steps to Check for Domain Membership - 1.2.000 (Gary Blake / 2023-07-25) - Added Support for VCF 5.0.x Planning and Prep Workbook - Improvements to message output =================================================================================================================== .SYNOPSIS Configure vSphere/NSX/Supervisor Cluster for Developer Ready Infrastructure .DESCRIPTION The driConfigureSupervisorCluster.ps1 provides a single script to configure vSphere, NSX and enable the Supervisor Cluster as defined by the Developer Ready Infrastrucutre for VMware Cloud Foundation Validated Solution .EXAMPLE driConfigureSupervisorCluster.ps1 -sddcManagerFqdn sfo-vcf01.sfo.rainpole.io -sddcManagerUser administrator@vsphere.local -sddcManagerPass VMw@re1! -workbook F:\vvs\PnP.xlsx -filePath F:\vvs This example performs the configuration of vSphere, NSX and enable the Supervisor Cluster using the parameters provided within the Planning and Preparation Workbook #> Param ( [Parameter (Mandatory = $true)] [ValidateNotNullOrEmpty()] [String]$sddcManagerFqdn, [Parameter (Mandatory = $true)] [ValidateNotNullOrEmpty()] [String]$sddcManagerUser, [Parameter (Mandatory = $true)] [ValidateNotNullOrEmpty()] [String]$sddcManagerPass, [Parameter (Mandatory = $true)] [ValidateNotNullOrEmpty()] [String]$workbook, [Parameter (Mandatory = $true)] [ValidateNotNullOrEmpty()] [String]$filePath ) Clear-Host; Write-Host "" Start-SetupLogFile -Path $filePath -ScriptName $MyInvocation.MyCommand.Name Write-LogMessage -Type INFO -Message "Starting the Process of Configuring vSphere / NSX / Supervisor Cluster on Developer Ready Infrastrucutre for VMware Cloud Foundation Validated Solution" -Colour Yellow Write-LogMessage -Type INFO -Message "Setting up the log file to path $logfile" Write-LogMessage -Type INFO -Message "Setting the working directoy to path: $filePath" Try { Write-LogMessage -Type INFO -Message "Checking Existance of Planning and Preparation Workbook: $workbook" if (!(Test-Path $workbook )) { Write-LogMessage -Type ERROR -Message "Unable to Find Planning and Preparation Workbook: $workbook, check details and try again" -Colour Red Break } else { Write-LogMessage -Type INFO -Message "Found Planning and Preparation Workbook: $workbook" } Write-LogMessage -Type INFO -Message "Checking a Connection to SDDC Manager: $sddcManagerFqdn" if (Test-VCFConnection -server $sddcManagerFqdn ) { Write-LogMessage -Type INFO -Message "Attempting to connect to VMware Cloud Foundation to Gather System Details" if (Test-VCFAuthentication -server $sddcManagerFqdn -user $sddcManagerUser -pass $sddcManagerPass) { Write-LogMessage -Type INFO -Message "Gathering Details from SDDC Manager Inventory and Extracting Worksheet Data from the Excel Workbook" Write-LogMessage -type INFO -message "Opening the Excel Workbook: $Workbook" $pnpWorkbook = Open-ExcelPackage -Path $Workbook Write-LogMessage -type INFO -message "Checking Valid Planning and Prepatation Workbook Provided" if (($pnpWorkbook.Workbook.Names["vcf_version"].Value -ne "v4.3.x") -and ($pnpWorkbook.Workbook.Names["vcf_version"].Value -ne "v4.4.x") -and ($pnpWorkbook.Workbook.Names["vcf_version"].Value -ne "v4.5.x") -and ($pnpWorkbook.Workbook.Names["vcf_version"].Value -ne "v5.0.x")) { Write-LogMessage -type INFO -message "Planning and Prepatation Workbook Provided Not Supported" -colour Red Break } else { Write-LogMessage -type INFO -message "Supported Planning and Preparation Workbook Provided. Version: $(($pnpWorkbook.Workbook.Names["vcf_version"].Value))" } $domainFqdn = $pnpWorkbook.Workbook.Names["region_ad_child_fqdn"].Value $wldSddcDomainName = $pnpWorkbook.Workbook.Names["wld_sddc_domain"].Value $kubSegmentName = $pnpWorkbook.Workbook.Names["k8s_mgmt_seg"].Value $wldTier1GatewayName = $pnpWorkbook.Workbook.Names["wld_tier1_name"].Value $kubSegmentGatewayCIDR = $pnpWorkbook.Workbook.Names["k8s_segment_gateway_ip_cidr"].Value $overlayTzName = "overlay-tz-" + $pnpWorkbook.Workbook.Names["wld_nsxt_vip_fqdn"].Value $wldTier0GatewayName = $pnpWorkbook.Workbook.Names["wld_tier0_name"].Value $wldPrefixListName = $pnpWorkbook.Workbook.Names["k8s_ip_prefixlist"].Value $kubSegmentSubnetCidr = $pnpWorkbook.Workbook.Names["k8s_segment_cidr"].Value $ingressSubnetCidr = $pnpWorkbook.Workbook.Names["k8s_ingress_pool_cidr"].Value $egressSubnetCidr = $pnpWorkbook.Workbook.Names["k8s_egress_pool_cidr"].Value $wldRouteMapName = $pnpWorkbook.Workbook.Names["k8s_ip_routemap"].Value $tagCategoryName = $pnpWorkbook.Workbook.Names["k8s_vcenter_category"].Value $tagName = $pnpWorkbook.Workbook.Names["k8s_vcenter_tag"].Value $spbmPolicyName = $pnpWorkbook.Workbook.Names["k8s_vcenter_storage_policy"].Value $contentLibraryName = $pnpWorkbook.Workbook.Names["k8s_vcenter_content_library"].Value $wmClusterName = $pnpWorkbook.Workbook.Names["wld_cluster"].Value $commonName = $pnpWorkbook.Workbook.Names["k8s_cluster_endpoint_fqdn"].Value $organization = $pnpWorkbook.Workbook.Names["ca_organization"].Value $organizationalUnit = $pnpWorkbook.Workbook.Names["ca_organization_unit"].Value $country = $pnpWorkbook.Workbook.Names["ca_country"].Value $stateOrProvince = $pnpWorkbook.Workbook.Names["ca_state"].Value $locality = $pnpWorkbook.Workbook.Names["ca_locality"].Value $adminEmailAddress = $pnpWorkbook.Workbook.Names["ca_email_address"].Value if ($null -eq $adminEmailAddress) { $adminEmailAddress = "tanzu-admin@" + $pnpWorkbook.Workbook.Names["region_ad_parent_fqdn"].Value } $KeySize = $pnpWorkbook.Workbook.Names["ca_key_size"].Value $domainBindUser = $pnpWorkbook.Workbook.Names["child_svc_vsphere_ad_user"].Value $domainBindPass = $pnpWorkbook.Workbook.Names["child_svc_vsphere_ad_password"].Value $wmNamespaceName = $pnpWorkbook.Workbook.Names["k8s_namepsace"].Value $wmNamespaceEditUserGroup = $pnpWorkbook.Workbook.Names["group_gg_kub_admins"].Value $wmNamespaceViewUserGroup = $pnpWorkbook.Workbook.Names["group_gg_kub_readonly"].Value $licenseKey = $pnpWorkbook.Workbook.Names["esx_k8s_license"].Value $mscaComputerName = $pnpWorkbook.Workbook.Names["certificate_authority_fqdn"].Value $mscaName = $pnpWorkbook.Workbook.Names["certificate_authority_name"].Value $certificateTemplate = $pnpWorkbook.Workbook.Names["ca_template_name"].Value $certificateRequestFile = $filePath + "\" + $pnpWorkbook.Workbook.Names["wld_cluster"].Value + ".csr" $certificateFile = $filePath + "\" + $pnpWorkbook.Workbook.Names["wld_cluster"].Value + ".1.cer" $caUsername = $pnpWorkbook.Workbook.Names["user_svc_vcf_ca_vcf"].Value $caUserPassword = $pnpWorkbook.Workbook.Names["svc_vcf_ca_vvd_password"].Value $wmClusterInput = @{ server = $sddcManagerFqdn user = $sddcManagerUser pass = $sddcManagerPass domain = $wldSddcDomainName cluster = $wmClusterName sizeHint = "Tiny" managementNetworkMode = "StaticRange" managementVirtualNetwork = $kubSegmentName managementNetworkStartIpAddress = $pnpWorkbook.Workbook.Names["k8s_mgmt_pool_start_ip"].Value managementNetworkAddressRangeSize = "5" managementNetworkGateway = $pnpWorkbook.Workbook.Names["k8s_segment_gateway_ip"].Value managementNetworkSubnetMask = $pnpWorkbook.Workbook.Names["k8s_segment_mask"].Value masterDnsName = $wmClusterName + "." + $domainFqdn masterNtpServers = @($pnpWorkbook.Workbook.Names["region_ntp1_server"].Value) masterDnsServers = @($pnpWorkbook.Workbook.Names["region_dns1_ip"].Value) contentLibrary = $contentLibraryName ephemeralStoragePolicy = $spbmPolicyName imageStoragePolicy = $spbmPolicyName masterStoragePolicy = $spbmPolicyName nsxEdgeCluster = $pnpWorkbook.Workbook.Names["wld_ec_name"].Value distributedSwitch = $pnpWorkbook.Workbook.Names["wld_vds_name"].Value podCIDRs = $pnpWorkbook.Workbook.Names["k8s_supervisor_cluster_pod_pool_cidr"].Value serviceCIDR = $pnpWorkbook.Workbook.Names["k8s_supervisor_cluster_service_pool_cidr"].Value externalIngressCIDRs = $ingressSubnetCidr externalEgressCIDRs = $egressSubnetCidr masterDnsSearchDomain = $pnpWorkbook.Workbook.Names["child_dns_zone"].Value workerDnsServers = @($pnpWorkbook.Workbook.Names["region_dns1_ip"].Value) } # Add a Network Segment for Tanzu to NSX-T Data Center Write-LogMessage -Type INFO -Message "Attempting to Add a Network Segment for Tanzu to NSX-T Data Center" $StatusMsg = Add-NetworkSegment -Server $sddcManagerFqdn -User $sddcManagerUser -Pass $sddcManagerPass -Domain $wldSddcDomainName -SegmentName $kubSegmentName -ConnectedGateway $wldTier1GatewayName -Cidr $kubSegmentGatewayCIDR -TransportZone $overlayTzName -GatewayType Tier1 -SegmentType Overlay -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Add IP Prefix Lists to the Tier-0 Gateway for Tanzu to NSX-T Data Center Write-LogMessage -Type INFO -Message "Attempting to Add IP Prefix Lists to the Tier-0 Gateway for Tanzu to NSX-T Data Center" $StatusMsg = Add-PrefixList -Server $sddcManagerFqdn -User $sddcManagerUser -Pass $sddcManagerPass -Domain $wldSddcDomainName -Tier0Gateway $wldTier0GatewayName -PrefixListName $wldPrefixListName -SubnetCIDR $kubSegmentSubnetCidr -ingressSubnetCidr $ingressSubnetCidr -egressSubnetCidr $egressSubnetCidr -GE "28" -LE "32" -Action PERMIT -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Create a Route Map on the Tier-0 Gateway for Tanzu to NSX-T Data Center Write-LogMessage -Type INFO -Message "Attempting to Create a Route Map on the Tier-0 Gateway for Tanzu to NSX-T Data Center" $StatusMsg = Add-RouteMap -Server $sddcManagerFqdn -User $sddcManagerUser -Pass $sddcManagerPass -Domain $wldSddcDomainName -Tier0Gateway $wldTier0GatewayName -RouteMap $wldRouteMapName -PrefixListName $wldPrefixListName -Action PERMIT -ApplyPolicy:$True -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Assign a New Tag to the vSAN Datastore in vCenter Server Write-LogMessage -Type INFO -Message "Attempting to Assign a New Tag to the vSAN Datastore in vCenter Server" $StatusMsg = Set-DatastoreTag -Server $sddcManagerFqdn -User $sddcManagerUser -Pass $sddcManagerPass -Domain $wldSddcDomainName -TagName $tagName -TagCategoryName $tagCategoryName -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green; $ErrorMsg = $null } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Create a Storage Policy that Uses the New vSphere Tag in vCenter Server Write-LogMessage -Type INFO -Message "Attempting to Create a Storage Policy that Uses the New vSphere Tag in vCenter Server" $StatusMsg = Add-StoragePolicy -Server $sddcManagerFqdn -User $sddcManagerUser -Pass $sddcManagerPass -Domain $wldSddcDomainName -PolicyName $spbmPolicyName -TagName $tagName -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green; $ErrorMsg = $null } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Create a Subscribed Content Library for Tanzu in vCenter Server Write-LogMessage -Type INFO -Message "Attempting to Create a Subscribed Content Library for Tanzu in vCenter Server" $StatusMsg = Add-ContentLibrary -Server $sddcManagerFqdn -User $sddcManagerUser -Pass $sddcManagerPass -Domain $wldSddcDomainName -ContentLibraryName $contentLibraryName -SubscriptionUrl "https://wp-content.vmware.com/v2/latest/lib.json" -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green; $ErrorMsg = $null } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Deploy a Supervisor Cluster for Developer Ready Infrastructure Write-LogMessage -Type INFO -Message "Attempting to Deploy a Supervisor Cluster for Developer Ready Infrastructure" $StatusMsg = Enable-SupervisorCluster @wmClusterInput -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green; $ErrorMsg = '' } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Signed Certificate Replacement Procedures - Requires System Executing the Script to be Joine to the Certificate Authority Domain if ($env:USERDNSDomain -eq $($domainFqdn.ToUpper)) { # Replace the Supervisor Cluster Kubernetes API Endpoint Certificate for Developer Ready Infrastructure Write-LogMessage -Type INFO -Message "Attempting to Replace the Supervisor Cluster Kubernetes API Endpoint Certificate for Developer Ready Infrastructure" Write-LogMessage -Type INFO -Message "Attempting to Generate the Supervisor Cluster CSR File" $StatusMsg = New-SupervisorClusterCSR -server $sddcManagerFqdn -user $sddcManagerUser -pass $sddcManagerPass -domain $wldSddcDomainName -cluster $wmClusterName -CommonName $commonName -Organization $organization -OrganizationalUnit $organizationalUnit -Country $country -StateOrProvince $stateOrProvince -Locality $locality -adminEmailAddress $adminEmailAddress -KeySize $keysize -FilePath $certificateRequestFile -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } Write-LogMessage -Type INFO -Message "Attempting to Request a Signed Certificate from the Microsoft Certificate Authority" $StatusMsg = Request-SignedCertificate -mscaComputerName $mscaComputerName -mscaName $mscaName -domainUsername $caUsername -domainPassword $caUserPassword -certificateTemplate $certificateTemplate -certificateRequestFile $certificateRequestFile -certificateFile $certificateFile -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } Write-LogMessage -Type INFO -Message "Attempting to Install the Supervisor Cluster Signed-Certificate" $StatusMsg = Install-SupervisorClusterCertificate -server $sddcManagerFqdn -user $sddcManagerUser -pass $sddcManagerPass -domain $wldSddcDomainName -cluster $wmClusterName -FilePath $certificateFile -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } } else { Write-LogMessage -Type INFO -Message "System Executing Script is Not Joined to the Domain '$domainFqdn': SKIPPING" -Colour Cyan } # License the Supervisor Cluster for Developer Ready Infrastructure Write-LogMessage -Type INFO -Message "Attempting to License the Supervisor Cluster for Developer Ready Infrastructure" $StatusMsg = Add-SupervisorClusterLicense -server $sddcManagerFqdn -user $sddcManagerUser -pass $sddcManagerPass -domain $wldSddcDomainName -Cluster $wmClusterName -LicenseKey $licenseKey -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Deploy a Supervisor Namespace for Developer Ready Infrastructure Write-LogMessage -Type INFO -Message "Attempting to Deploy a Supervisor Namespace for Developer Ready Infrastructure" $StatusMsg = Add-Namespace -Server $sddcManagerFqdn -User $sddcManagerUser -Pass $sddcManagerPass -Domain $wldSddcDomainName -Cluster $wmClusterName -Namespace $wmNamespaceName -StoragePolicy $spbmPolicyName -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green; $ErrorMsg = '' } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Assign the Supervisor Namespace Roles to Active Directory Groups Write-LogMessage -Type INFO -Message "Attempting to Assign the Supervisor Namespace Roles to Active Directory Groups" $StatusMsg = Add-NamespacePermission -server $sddcManagerFqdn -user $sddcManagerUser -pass $sddcManagerPass -sddcDomain $wldSddcDomainName -domain $domainFqdn -domainBindUser $domainBindUser -domainBindPass $domainBindPass -namespace $wmNamespaceName -principal $wmNamespaceEditUserGroup -role edit -type group -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } $StatusMsg = Add-NamespacePermission -server $sddcManagerFqdn -user $sddcManagerUser -pass $sddcManagerPass -sddcDomain $wldSddcDomainName -domain $domainFqdn -domainBindUser $domainBindUser -domainBindPass $domainBindPass -namespace $wmNamespaceName -principal $wmNamespaceViewUserGroup -role view -type group -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } # Enable the Registry Service on the Supervisor Cluster for Developer Ready Infrastructure Write-LogMessage -Type INFO -Message "Attempting to Enable the Registry Service on the Supervisor Cluster for Developer Ready Infrastructure" $StatusMsg = Enable-Registry -Server $sddcManagerFqdn -User $sddcManagerUser -Pass $sddcManagerPass -Domain $wldSddcDomainName -StoragePolicy $spbmPolicyName -WarningAction SilentlyContinue -ErrorAction SilentlyContinue -WarningVariable WarnMsg -ErrorVariable ErrorMsg if ( $StatusMsg ) { Write-LogMessage -Type INFO -Message "$StatusMsg" -Colour Green } if ( $WarnMsg ) { Write-LogMessage -Type WARNING -Message $WarnMsg -Colour Magenta } if ( $ErrorMsg ) { Write-LogMessage -Type ERROR -Message $ErrorMsg -Colour Red } } } } Catch { Debug-CatchWriter -object $_ } Write-LogMessage -Type INFO -Message "Finishing the Process of Configuring vSphere / NSX / Supervisor Cluster on Developer Ready Infrastrucutre for VMware Cloud Foundation Validated Solution" -Colour Yellow |