Public/Responses.ps1
|
<#
.SYNOPSIS Attaches a file onto the Response for downloading. .DESCRIPTION Attaches a file from the "/public", and static Routes, onto the Response for downloading. If the supplied path is not in the Static Routes but is a literal/relative path, then this file is used instead. .PARAMETER Path The Path to a static file relative to the "/public" directory, or a static Route. If the supplied Path doesn't match any custom static Route, then Pode will look in the "/public" directory. Failing this, if the file path exists as a literal/relative file, then this file is used as a fall back. .PARAMETER ContentType Manually specify the content type of the response rather than infering it from the attachment's file extension. The supplied value must match the valid ContentType format, e.g. application/json .EXAMPLE Set-PodeResponseAttachment -Path 'downloads/installer.exe' .EXAMPLE Set-PodeResponseAttachment -Path './image.png' .EXAMPLE Set-PodeResponseAttachment -Path 'c:/content/accounts.xlsx' .EXAMPLE Set-PodeResponseAttachment -Path './data.txt' -ContentType 'application/json' #> function Set-PodeResponseAttachment { [CmdletBinding()] param ( [Parameter(Mandatory=$true)] [string] $Path, [ValidatePattern('^\w+\/[\w\.\+-]+$')] [string] $ContentType ) # only attach files from public/static-route directories when path is relative $_path = (Get-PodeStaticRoutePath -Route $Path).Path # if there's no path, check the original path (in case it's literal/relative) if (!(Test-PodePath $_path -NoStatus)) { $Path = Get-PodeRelativePath -Path $Path -JoinRoot if (Test-PodePath $Path -NoStatus) { $_path = $Path } } # test the file path, and set status accordingly if (!(Test-PodePath $_path)) { return } $filename = Get-PodeFileName -Path $_path $ext = Get-PodeFileExtension -Path $_path -TrimPeriod try { # setup the content type and disposition if (!$ContentType) { $WebEvent.Response.ContentType = (Get-PodeContentType -Extension $ext) } else { $WebEvent.Response.ContentType = $ContentType } Set-PodeHeader -Name 'Content-Disposition' -Value "attachment; filename=$($filename)" # if serverless, get the content raw and return if (!$WebEvent.Streamed) { if (Test-IsPSCore) { $content = (Get-Content -Path $_path -Raw -AsByteStream) } else { $content = (Get-Content -Path $_path -Raw -Encoding byte) } $WebEvent.Response.Body = $content } # else if normal, stream the content back else { # setup the response details and headers $WebEvent.Response.SendChunked = $false # set file as an attachment on the response $buffer = [byte[]]::new(64 * 1024) $read = 0 # open up the file as a stream $fs = (Get-Item $_path).OpenRead() $WebEvent.Response.ContentLength64 = $fs.Length while (($read = $fs.Read($buffer, 0, $buffer.Length)) -gt 0) { $WebEvent.Response.OutputStream.Write($buffer, 0, $read) } } } finally { Close-PodeDisposable -Disposable $fs } } <# .SYNOPSIS Writes a String or a Byte[] to the Response. .DESCRIPTION Writes a String or a Byte[] to the Response, as some specified content type. This value can also be cached. .PARAMETER Value A String value to write. .PARAMETER Bytes An array of Bytes to write. .PARAMETER ContentType The content type of the data being written. .PARAMETER MaxAge The maximum age to cache the value on the browser, in seconds. .PARAMETER StatusCode The status code to set against the response. .PARAMETER Cache Should the value be cached by browsers, or not? .EXAMPLE Write-PodeTextResponse -Value 'Leeeeeerrrooooy Jeeeenkiiins!' .EXAMPLE Write-PodeTextResponse -Value '{"name": "Rick"}' -ContentType 'application/json' .EXAMPLE Write-PodeTextResponse -Bytes (Get-Content -Path ./some/image.png -Raw -AsByteStream) -Cache -MaxAge 1800 .EXAMPLE Write-PodeTextResponse -Value 'Untitled Text Response' -StatusCode 418 #> function Write-PodeTextResponse { [CmdletBinding(DefaultParameterSetName='String')] param ( [Parameter(ParameterSetName='String')] [string] $Value, [Parameter(ParameterSetName='Bytes')] [byte[]] $Bytes, [Parameter()] [string] $ContentType = 'text/plain', [Parameter()] [int] $MaxAge = 3600, [Parameter()] [int] $StatusCode = 200, [switch] $Cache ) $isStringValue = ($PSCmdlet.ParameterSetName -ieq 'string') $isByteValue = ($PSCmdlet.ParameterSetName -ieq 'bytes') # set the status code of the response, but only if it's not 200 (to prevent overriding) if ($StatusCode -ne 200) { Set-PodeResponseStatus -Code $StatusCode -NoErrorPage } # if there's nothing to write, return if ($isStringValue -and [string]::IsNullOrWhiteSpace($Value)) { return } if ($isByteValue -and (($null -eq $Bytes) -or ($Bytes.Length -eq 0))) { return } # if the response stream isn't writable, return $res = $WebEvent.Response if (($null -eq $res) -or ($WebEvent.Streamed -and (($null -eq $res.OutputStream) -or !$res.OutputStream.CanWrite))) { return } # set a cache value if ($Cache) { Set-PodeHeader -Name 'Cache-Control' -Value "max-age=$($MaxAge), must-revalidate" Set-PodeHeader -Name 'Expires' -Value ([datetime]::UtcNow.AddSeconds($MaxAge).ToString("r", [CultureInfo]::InvariantCulture)) } # specify the content-type if supplied (adding utf-8 if missing) if (![string]::IsNullOrWhiteSpace($ContentType)) { $charset = 'charset=utf-8' if ($ContentType -inotcontains $charset) { $ContentType = "$($ContentType); $($charset)" } $res.ContentType = $ContentType } # if we're serverless, set the string as the body if (!$WebEvent.Streamed) { if ($isStringValue) { $res.Body = $Value } else { $res.Body = $Bytes } } else { # convert string to bytes if ($isStringValue) { $Bytes = ConvertFrom-PodeValueToBytes -Value $Value } # write the content to the response stream $res.ContentLength64 = $Bytes.Length try { $ms = New-Object -TypeName System.IO.MemoryStream $ms.Write($Bytes, 0, $Bytes.Length) $ms.WriteTo($res.OutputStream) } catch { if ((Test-PodeValidNetworkFailure $_.Exception)) { return } $_ | Write-PodeErrorLog throw } finally { if ($null -ne $ms) { $ms.Close() } } } } <# .SYNOPSIS Renders the content of a static, or dynamic, file on the Response. .DESCRIPTION Renders the content of a static, or dynamic, file on the Response. You can set browser's to cache the content, and also override the file's content type. .PARAMETER Path The path to a file. .PARAMETER Data A HashTable of dynamic data to supply to a dynamic file. .PARAMETER ContentType The content type of the file's contents - this overrides the file's extension. .PARAMETER MaxAge The maximum age to cache the file's content on the browser, in seconds. .PARAMETER StatusCode The status code to set against the response. .PARAMETER Cache Should the file's content be cached by browsers, or not? .EXAMPLE Write-PodeFileResponse -Path 'C:/Files/Stuff.txt' .EXAMPLE Write-PodeFileResponse -Path 'C:/Files/Stuff.txt' -Cache -MaxAge 1800 .EXAMPLE Write-PodeFileResponse -Path 'C:/Files/Stuff.txt' -ContentType 'application/json' .EXAMPLE Write-PodeFileResponse -Path 'C:/Views/Index.pode' -Data @{ Counter = 2 } .EXAMPLE Write-PodeFileResponse -Path 'C:/Files/Stuff.txt' -StatusCode 201 #> function Write-PodeFileResponse { [CmdletBinding()] param ( [Parameter(Mandatory=$true)] [ValidateNotNull()] [string] $Path, [Parameter()] $Data = @{}, [Parameter()] [string] $ContentType = $null, [Parameter()] [int] $MaxAge = 3600, [Parameter()] [int] $StatusCode = 200, [switch] $Cache ) # resolve for relative path $Path = Get-PodeRelativePath -Path $Path -JoinRoot # test the file path, and set status accordingly if (!(Test-PodePath $Path -FailOnDirectory)) { return } # are we dealing with a dynamic file for the view engine? (ignore html) $mainExt = Get-PodeFileExtension -Path $Path -TrimPeriod # generate dynamic content if (![string]::IsNullOrWhiteSpace($mainExt) -and (($mainExt -ieq 'pode') -or ($mainExt -ieq $PodeContext.Server.ViewEngine.Extension))) { $content = Get-PodeFileContentUsingViewEngine -Path $Path -Data $Data # get the sub-file extension, if empty, use original $subExt = Get-PodeFileExtension -Path (Get-PodeFileName -Path $Path -WithoutExtension) -TrimPeriod $subExt = (Protect-PodeValue -Value $subExt -Default $mainExt) $ContentType = (Protect-PodeValue -Value $ContentType -Default (Get-PodeContentType -Extension $subExt)) Write-PodeTextResponse -Value $content -ContentType $ContentType -StatusCode $StatusCode } # this is a static file else { if (Test-IsPSCore) { $content = (Get-Content -Path $Path -Raw -AsByteStream) } else { $content = (Get-Content -Path $Path -Raw -Encoding byte) } $ContentType = (Protect-PodeValue -Value $ContentType -Default (Get-PodeContentType -Extension $mainExt)) Write-PodeTextResponse -Bytes $content -ContentType $ContentType -MaxAge $MaxAge -StatusCode $StatusCode -Cache:$Cache } } <# .SYNOPSIS Writes CSV data to the Response. .DESCRIPTION Writes CSV data to the Response, setting the content type accordingly. .PARAMETER Value A String, PSObject, or HashTable value. .PARAMETER Path The path to a CSV file. .PARAMETER StatusCode The status code to set against the response. .EXAMPLE Write-PodeCsvResponse -Value "Name`nRick" .EXAMPLE Write-PodeCsvResponse -Value @{ Name = 'Rick' } .EXAMPLE Write-PodeCsvResponse -Path 'E:/Files/Names.csv' #> function Write-PodeCsvResponse { [CmdletBinding(DefaultParameterSetName='Value')] param ( [Parameter(Mandatory=$true, ParameterSetName='Value')] $Value, [Parameter(Mandatory=$true, ParameterSetName='File')] [string] $Path, [Parameter()] [int] $StatusCode = 200 ) switch ($PSCmdlet.ParameterSetName.ToLowerInvariant()) { 'file' { if (Test-PodePath $Path) { $Value = Get-PodeFileContent -Path $Path } } 'value' { if ($Value -isnot [string]) { $Value = @(foreach ($v in $Value) { New-Object psobject -Property $v }) if (Test-IsPSCore) { $Value = ($Value | ConvertTo-Csv -Delimiter ',' -IncludeTypeInformation:$false) } else { $Value = ($Value | ConvertTo-Csv -Delimiter ',' -NoTypeInformation) } $Value = ($Value -join ([environment]::NewLine)) } } } if ([string]::IsNullOrWhiteSpace($Value)) { $Value = [string]::Empty } Write-PodeTextResponse -Value $Value -ContentType 'text/csv' -StatusCode $StatusCode } <# .SYNOPSIS Writes HTML data to the Response. .DESCRIPTION Writes HTML data to the Response, setting the content type accordingly. .PARAMETER Value A String, PSObject, or HashTable value. .PARAMETER Path The path to a HTML file. .PARAMETER StatusCode The status code to set against the response. .EXAMPLE Write-PodeHtmlResponse -Value '<html><body>Hello!</body></html>' .EXAMPLE Write-PodeHtmlResponse -Value @{ Message = 'Hello, all!' } .EXAMPLE Write-PodeHtmlResponse -Path 'E:/Site/About.html' #> function Write-PodeHtmlResponse { [CmdletBinding(DefaultParameterSetName='Value')] param ( [Parameter(Mandatory=$true, ParameterSetName='Value')] $Value, [Parameter(Mandatory=$true, ParameterSetName='File')] [string] $Path, [Parameter()] [int] $StatusCode = 200 ) switch ($PSCmdlet.ParameterSetName.ToLowerInvariant()) { 'file' { if (Test-PodePath $Path) { $Value = Get-PodeFileContent -Path $Path } } 'value' { if ($Value -isnot [string]) { $Value = ($Value | ConvertTo-Html) $Value = ($Value -join ([environment]::NewLine)) } } } if ([string]::IsNullOrWhiteSpace($Value)) { $Value = [string]::Empty } Write-PodeTextResponse -Value $Value -ContentType 'text/html' -StatusCode $StatusCode } <# .SYNOPSIS Writes Markdown data to the Response. .DESCRIPTION Writes Markdown data to the Response, with the option to render it as HTML. .PARAMETER Value A String, PSObject, or HashTable value. .PARAMETER Path The path to a Markdown file. .PARAMETER StatusCode The status code to set against the response. .PARAMETER AsHtml If supplied, the Markdown will be converted to HTML. (This is only supported in PS7+) .EXAMPLE Write-PodeMarkdownResponse -Value '# Hello, world!' -AsHtml .EXAMPLE Write-PodeMarkdownResponse -Path 'E:/Site/About.md' #> function Write-PodeMarkdownResponse { [CmdletBinding(DefaultParameterSetName='Value')] param ( [Parameter(Mandatory=$true, ParameterSetName='Value')] $Value, [Parameter(Mandatory=$true, ParameterSetName='File')] [string] $Path, [Parameter()] [int] $StatusCode = 200, [switch] $AsHtml ) switch ($PSCmdlet.ParameterSetName.ToLowerInvariant()) { 'file' { if (Test-PodePath $Path) { $Value = Get-PodeFileContent -Path $Path } } } if ([string]::IsNullOrWhiteSpace($Value)) { $Value = [string]::Empty } $mimeType = 'text/markdown' if ($AsHtml) { if ($PSVersionTable.PSVersion.Major -ge 7) { $mimeType = 'text/html' $Value = ($Value | ConvertFrom-Markdown).Html } } Write-PodeTextResponse -Value $Value -ContentType $mimeType -StatusCode $StatusCode } <# .SYNOPSIS Writes JSON data to the Response. .DESCRIPTION Writes JSON data to the Response, setting the content type accordingly. .PARAMETER Value A String, PSObject, or HashTable value. For non-string values, they will be converted to JSON. .PARAMETER Path The path to a JSON file. .PARAMETER Depth The Depth to generate the JSON document - the larger this value the worse performance gets. .PARAMETER StatusCode The status code to set against the response. .EXAMPLE Write-PodeJsonResponse -Value '{"name": "Rick"}' .EXAMPLE Write-PodeJsonResponse -Value @{ Name = 'Rick' } -StatusCode 201 .EXAMPLE Write-PodeJsonResponse -Path 'E:/Files/Names.json' #> function Write-PodeJsonResponse { [CmdletBinding(DefaultParameterSetName='Value')] param ( [Parameter(Mandatory=$true, ParameterSetName='Value')] $Value, [Parameter(Mandatory=$true, ParameterSetName='File')] [string] $Path, [Parameter()] [int] $Depth = 10, [Parameter()] [int] $StatusCode = 200 ) switch ($PSCmdlet.ParameterSetName.ToLowerInvariant()) { 'file' { if (Test-PodePath $Path) { $Value = Get-PodeFileContent -Path $Path } } 'value' { if ($Value -isnot [string]) { if ($Depth -le 0) { $Value = ($Value | ConvertTo-Json -Compress) } else { $Value = ($Value | ConvertTo-Json -Depth $Depth -Compress) } } } } if ([string]::IsNullOrWhiteSpace($Value)) { $Value = '{}' } Write-PodeTextResponse -Value $Value -ContentType 'application/json' -StatusCode $StatusCode } <# .SYNOPSIS Writes XML data to the Response. .DESCRIPTION Writes XML data to the Response, setting the content type accordingly. .PARAMETER Value A String, PSObject, or HashTable value. .PARAMETER Path The path to an XML file. .PARAMETER StatusCode The status code to set against the response. .EXAMPLE Write-PodeXmlResponse -Value '<root><name>Rick</name></root>' .EXAMPLE Write-PodeXmlResponse -Value @{ Name = 'Rick' } -StatusCode 201 .EXAMPLE Write-PodeXmlResponse -Path 'E:/Files/Names.xml' #> function Write-PodeXmlResponse { [CmdletBinding(DefaultParameterSetName='Value')] param ( [Parameter(Mandatory=$true, ParameterSetName='Value')] $Value, [Parameter(Mandatory=$true, ParameterSetName='File')] [string] $Path, [Parameter()] [int] $StatusCode = 200 ) switch ($PSCmdlet.ParameterSetName.ToLowerInvariant()) { 'file' { if (Test-PodePath $Path) { $Value = Get-PodeFileContent -Path $Path } } 'value' { if ($Value -isnot [string]) { $Value = @(foreach ($v in $Value) { New-Object psobject -Property $v }) $Value = ($Value | ConvertTo-Xml -Depth 10 -As String -NoTypeInformation) } } } if ([string]::IsNullOrWhiteSpace($Value)) { $Value = [string]::Empty } Write-PodeTextResponse -Value $Value -ContentType 'text/xml' -StatusCode $StatusCode } <# .SYNOPSIS Renders a dynamic, or static, View on the Response. .DESCRIPTION Renders a dynamic, or static, View on the Response; allowing for dynamic data to be supplied. .PARAMETER Path The path to a View, relative to the "/views" directory. (Extension is optional). .PARAMETER Data Any dynamic data to supply to a dynamic View. .PARAMETER StatusCode The status code to set against the response. .PARAMETER FlashMessages Automatically supply all Flash messages in the current session to the View. .EXAMPLE Write-PodeViewResponse -Path 'index' .EXAMPLE Write-PodeViewResponse -Path 'accounts/profile_page' -Data @{ Username = 'Morty' } .EXAMPLE Write-PodeViewResponse -Path 'login' -FlashMessages #> function Write-PodeViewResponse { [CmdletBinding()] param ( [Parameter(Mandatory=$true)] [string] $Path, [Parameter()] [hashtable] $Data = @{}, [Parameter()] [int] $StatusCode = 200, [switch] $FlashMessages ) # default data if null if ($null -eq $Data) { $Data = @{} } # add path to data as "pagename" - unless key already exists if (!$Data.ContainsKey('pagename')) { $Data['pagename'] = $Path } # load all flash messages if needed if ($FlashMessages -and ($null -ne $WebEvent.Session.Data.Flash)) { $Data['flash'] = @{} foreach ($name in (Get-PodeFlashMessageNames)) { $Data.flash[$name] = (Get-PodeFlashMessage -Name $name) } } elseif ($null -eq $Data['flash']) { $Data['flash'] = @{} } # add view engine extension $ext = Get-PodeFileExtension -Path $Path if ([string]::IsNullOrWhiteSpace($ext)) { $Path += ".$($PodeContext.Server.ViewEngine.Extension)" } # only look in the view directory $Path = (Join-Path $PodeContext.Server.InbuiltDrives['views'] $Path) # test the file path, and set status accordingly if (!(Test-PodePath $Path)) { return } # run any engine logic and render it $engine = (Get-PodeViewEngineType -Path $Path) $value = (Get-PodeFileContentUsingViewEngine -Path $Path -Data $Data) switch ($engine.ToLowerInvariant()) { 'md' { Write-PodeMarkdownResponse -Value $value -StatusCode $StatusCode -AsHtml } default { Write-PodeHtmlResponse -Value $value -StatusCode $StatusCode } } } <# .SYNOPSIS Sets the Status Code of the Response, and controls rendering error pages. .DESCRIPTION Sets the Status Code of the Response, and controls rendering error pages. .PARAMETER Code The Status Code to set on the Response. .PARAMETER Description An optional Status Description. .PARAMETER Exception An exception to use when detailing error information on error pages. .PARAMETER ContentType The content type of the error page to use. .PARAMETER NoErrorPage Don't render an error page when the Status Code is 400+. .EXAMPLE Set-PodeResponseStatus -Code 404 .EXAMPLE Set-PodeResponseStatus -Code 500 -Exception $_.Exception .EXAMPLE Set-PodeResponseStatus -Code 500 -Exception $_.Exception -ContentType 'application/json' #> function Set-PodeResponseStatus { [CmdletBinding()] param ( [Parameter(Mandatory=$true)] [int] $Code, [Parameter()] [string] $Description, [Parameter()] $Exception, [Parameter()] [string] $ContentType = $null, [switch] $NoErrorPage ) # set the code $WebEvent.Response.StatusCode = $Code # set an appropriate description (mapping if supplied is blank) if ([string]::IsNullOrWhiteSpace($Description)) { $Description = (Get-PodeStatusDescription -StatusCode $Code) } if (!$PodeContext.Server.IsServerless -and ![string]::IsNullOrWhiteSpace($Description)) { $WebEvent.Response.StatusDescription = $Description } # if the status code is >=400 then attempt to load error page if (!$NoErrorPage -and ($Code -ge 400)) { Show-PodeErrorPage -Code $Code -Description $Description -Exception $Exception -ContentType $ContentType } } <# .SYNOPSIS Redirecting a user to a new URL. .DESCRIPTION Redirecting a user to a new URL, or the same URL as the Request but a different Protocol - or other components. .PARAMETER Url Redirect the user to a new URL, or a relative path. .PARAMETER Port Change the port of the current Request before redirecting. .PARAMETER Protocol Change the protocol of the current Request before redirecting. .PARAMETER Address Change the domain address of the current Request before redirecting. .PARAMETER Moved Set the Status Code as "301 Moved", rather than "302 Redirect". .EXAMPLE Move-PodeResponseUrl -Url 'https://google.com' .EXAMPLE Move-PodeResponseUrl -Url '/about' .EXAMPLE Move-PodeResponseUrl -Protocol HTTPS .EXAMPLE Move-PodeResponseUrl -Port 9000 -Moved #> function Move-PodeResponseUrl { [CmdletBinding(DefaultParameterSetName='Url')] param ( [Parameter(Mandatory=$true, ParameterSetName='Url')] [string] $Url, [Parameter(ParameterSetName='Components')] [int] $Port = 0, [Parameter(ParameterSetName='Components')] [ValidateSet('', 'Http', 'Https')] [string] $Protocol, [Parameter(ParameterSetName='Components')] [string] $Address, [switch] $Moved ) if ($PSCmdlet.ParameterSetName -ieq 'components') { $uri = $WebEvent.Request.Url # set the protocol $Protocol = $Protocol.ToLowerInvariant() if ([string]::IsNullOrWhiteSpace($Protocol)) { $Protocol = $uri.Scheme } # set the domain if ([string]::IsNullOrWhiteSpace($Address)) { $Address = $uri.Host } # set the port if ($Port -le 0) { $Port = $uri.Port } $PortStr = [string]::Empty if (@(80, 443) -notcontains $Port) { $PortStr = ":$($Port)" } # combine to form the url $Url = "$($Protocol)://$($Address)$($PortStr)$($uri.PathAndQuery)" } Set-PodeHeader -Name 'Location' -Value $Url if ($Moved) { Set-PodeResponseStatus -Code 301 -Description 'Moved' } else { Set-PodeResponseStatus -Code 302 -Description 'Redirect' } } <# .SYNOPSIS Writes data to a TCP Client stream. .DESCRIPTION Writes data to a TCP Client stream. .PARAMETER Message Parameter description .PARAMETER Client An optional TcpClient to write data. .EXAMPLE Write-PodeTcpClient -Message '250 OK' #> function Write-PodeTcpClient { [CmdletBinding()] param ( [Parameter()] [string] $Message, [Parameter()] $Client ) # error if serverless Test-PodeIsServerless -FunctionName 'Write-PodeTcpClient' -ThrowError # use the main client if one isn't supplied if ($null -eq $Client) { $Client = $TcpEvent.Client } $encoder = New-Object System.Text.ASCIIEncoding $buffer = $encoder.GetBytes("$($Message)`r`n") $stream = $Client.GetStream() Wait-PodeTask -Task $stream.WriteAsync($buffer, 0, $buffer.Length) $stream.Flush() } <# .SYNOPSIS Reads data from a TCP Client stream. .DESCRIPTION Reads data from a TCP Client stream. .PARAMETER Client An optional TcpClient from which to read data. .EXAMPLE $data = Read-PodeTcpClient #> function Read-PodeTcpClient { [CmdletBinding()] [OutputType([string])] param ( [Parameter()] $Client ) # error if serverless Test-PodeIsServerless -FunctionName 'Read-PodeTcpClient' -ThrowError # use the main client if one isn't supplied if ($null -eq $Client) { $Client = $TcpEvent.Client } $bytes = New-Object byte[] 8192 $encoder = New-Object System.Text.ASCIIEncoding $stream = $Client.GetStream() $bytesRead = (Wait-PodeTask -Task $stream.ReadAsync($bytes, 0, 8192)) return $encoder.GetString($bytes, 0, $bytesRead) } <# .SYNOPSIS Saves an uploaded file on the Request to the File System. .DESCRIPTION Saves an uploaded file on the Request to the File System. .PARAMETER Key The name of the key within the web event's Data HashTable that stores the file's name. .PARAMETER Path The path to save files. .EXAMPLE Save-PodeRequestFile -Key 'avatar' .EXAMPLE Save-PodeRequestFile -Key 'avatar' -Path 'F:/Images' #> function Save-PodeRequestFile { [CmdletBinding()] param ( [Parameter(Mandatory=$true)] [string] $Key, [Parameter()] [string] $Path = '.' ) # if path is '.', replace with server root $Path = Get-PodeRelativePath -Path $Path -JoinRoot # ensure the parameter name exists in data $fileName = $WebEvent.Data[$Key] if ([string]::IsNullOrWhiteSpace($fileName)) { throw "A parameter called '$($Key)' was not supplied in the request" } # ensure the file data exists if (!$WebEvent.Files.ContainsKey($fileName)) { throw "No data for file '$($fileName)' was uploaded in the request" } # if the path is a directory, add the filename if (Test-PodePathIsDirectory -Path $Path) { $Path = Join-Path $Path $fileName } # save the file [System.IO.File]::WriteAllBytes($Path, $WebEvent.Files[$fileName].Bytes) } <# .SYNOPSIS Short description .DESCRIPTION Long description .PARAMETER Type The type name of the view engine (inbuilt types are: Pode and HTML). .PARAMETER ScriptBlock A ScriptBlock for specifying custom view engine rendering rules. .PARAMETER Extension A custom extension for the engine's files. .EXAMPLE Set-PodeViewEngine -Type HTML .EXAMPLE Set-PodeViewEngine -Type Markdown .EXAMPLE Set-PodeViewEngine -Type PSHTML -Extension PS1 -ScriptBlock { param($path, $data) /* logic */ } #> function Set-PodeViewEngine { [CmdletBinding()] param ( [Parameter()] [string] $Type, [Parameter()] [scriptblock] $ScriptBlock = $null, [Parameter()] [string] $Extension ) # truncate markdown if ($Type -ieq 'Markdown') { $Type = 'md' } # override extension with type if ([string]::IsNullOrWhiteSpace($Extension)) { $Extension = $Type.ToLowerInvariant() } # setup view engine config $PodeContext.Server.ViewEngine.Type = $Type.ToLowerInvariant() $PodeContext.Server.ViewEngine.Extension = $Extension $PodeContext.Server.ViewEngine.Script = $ScriptBlock $PodeContext.Server.ViewEngine.IsDynamic = (@('html', 'md') -inotcontains $Type) } <# .SYNOPSIS Includes the contents of a partial View into another dynamic View. .DESCRIPTION Includes the contents of a partial View into another dynamic View. The partial View can be static or dynamic. .PARAMETER Path The path to a partial View, relative to the "/views" directory. (Extension is optional). .PARAMETER Data Any dynamic data to supply to a dynamic partial View. .EXAMPLE Use-PodePartialView -Path 'shared/footer' #> function Use-PodePartialView { [CmdletBinding()] [OutputType([string])] param ( [Parameter(Mandatory=$true)] [string] $Path, [Parameter()] $Data = @{} ) # default data if null if ($null -eq $Data) { $Data = @{} } # add view engine extension $ext = Get-PodeFileExtension -Path $Path if ([string]::IsNullOrWhiteSpace($ext)) { $Path += ".$($PodeContext.Server.ViewEngine.Extension)" } # only look in the view directory $Path = (Join-Path $PodeContext.Server.InbuiltDrives['views'] $Path) # test the file path, and set status accordingly if (!(Test-PodePath $Path -NoStatus)) { throw "File not found at path: $($Path)" } # run any engine logic return (Get-PodeFileContentUsingViewEngine -Path $Path -Data $Data) } <# .SYNOPSIS Broadcasts a message to connected WebSocket clients. .DESCRIPTION Broadcasts a message to all, or some, connected WebSocket clients. You can specify a path to send messages to, or a specific ClientId. .PARAMETER Value A String, PSObject, or HashTable value. For non-string values, they will be converted to JSON. .PARAMETER Path The Path of connected clients to send the message. .PARAMETER ClientId A specific ClientId of a connected client to send a message. Not currently used. .PARAMETER Depth The Depth to generate the JSON document - the larger this value the worse performance gets. .EXAMPLE Send-PodeSignal -Value @{ Message = 'Hello, world!' } .EXAMPLE Send-PodeSignal -Value @{ Data = @(123, 100, 101) } -Path '/response-charts' #> function Send-PodeSignal { [CmdletBinding()] param( [Parameter(Mandatory=$true, ValueFromPipeline=$true)] $Value, [Parameter()] [string] $Path, [Parameter()] [string] $ClientId, [Parameter()] [int] $Depth = 10 ) if ($Value -isnot [string]) { if ($Depth -le 0) { $Value = ($Value | ConvertTo-Json -Compress) } else { $Value = ($Value | ConvertTo-Json -Depth $Depth -Compress) } } $PodeContext.Server.WebSockets.Queues.Messages.Enqueue(@{ Value = $Value ClientId = $ClientId Path = $Path }) } |