Public/Update-PatLibrary.ps1
|
function Update-PatLibrary { <# .SYNOPSIS Refreshes a Plex library section. .DESCRIPTION Triggers a refresh scan on a specified Plex library section. Optionally scans a specific path within the library. You can specify the section by ID or by friendly name. .PARAMETER ServerName The name of a stored server to use. Use Get-PatStoredServer to see available servers. This is more convenient than ServerUri as you don't need to remember the URI or token. .PARAMETER ServerUri The base URI of the Plex server (e.g., http://plex.example.com:32400) If not specified, uses the default stored server. .PARAMETER Token The Plex authentication token. Required when using -ServerUri to authenticate with the server. If not specified with -ServerUri, requests may fail with 401. .PARAMETER SectionId The ID of the library section to refresh .PARAMETER SectionName The friendly name of the library section to refresh (e.g., "Movies", "TV Shows") .PARAMETER Path Optional path within the library to scan. If omitted, the entire section is scanned. .PARAMETER PassThru If specified, returns the library section object after refreshing. .PARAMETER SkipPathValidation If specified, skips validation that the path exists before triggering the refresh. Use when you know the path is valid or want to scan a path that may not be browsable. .PARAMETER Wait If specified, waits for the library scan to complete before returning. .PARAMETER Timeout Maximum time in seconds to wait for the scan to complete when using -Wait. Default is 300 seconds (5 minutes). .PARAMETER ReportChanges If specified, returns a report of changes detected during the scan. Automatically enables -Wait behavior. .EXAMPLE Update-PatLibrary -ServerUri "http://plex.example.com:32400" -SectionId 2 Refreshes the entire library section 2. .EXAMPLE Update-PatLibrary -SectionName "Movies" Refreshes the "Movies" library section on the default stored server. .EXAMPLE Update-PatLibrary -ServerUri "http://plex.example.com:32400" -SectionName "Movies" Refreshes the library section named "Movies". .EXAMPLE Update-PatLibrary -ServerUri "http://plex.example.com:32400" -SectionId 2 -Path "/mnt/media/Movies" Refreshes only the specified path within library section 2. .EXAMPLE Update-PatLibrary -SectionId 2 -Path "/mnt/media/Movies" Refreshes only the specified path within library section 2 on the default stored server. .EXAMPLE Update-PatLibrary -ServerUri "http://plex.example.com:32400" -SectionName "Movies" -Path "/mnt/media/Movies/Action" Refreshes only the specified path within the "Movies" library section. .EXAMPLE Update-PatLibrary -ServerUri "http://plex.example.com:32400" -SectionId 2 -WhatIf Shows what would happen if the command runs without actually refreshing the library. .EXAMPLE Update-PatLibrary -SectionId 2 -PassThru Refreshes library section 2 and returns the library object. .EXAMPLE Update-PatLibrary -SectionName 'Movies' -Path '/mnt/media/Movies/NewMovie' Validates that the path exists (default behavior), then triggers the refresh. Throws an error if the path is invalid or not within the library's configured paths. .EXAMPLE Update-PatLibrary -SectionName 'Movies' -Path '/mnt/media/Movies/NewMovie' -SkipPathValidation Skips path validation and triggers the refresh directly. Use when you know the path is valid or want to scan a path that may not be browsable. .EXAMPLE Update-PatLibrary -SectionName 'Movies' -Path '/mnt/media/Movies/NewMovie' -Wait Validates the path, triggers the refresh, and waits for the scan to complete. .EXAMPLE Update-PatLibrary -SectionName 'Movies' -Path '/mnt/media/Movies/NewMovie' -Wait -Timeout 60 Validates the path, triggers the refresh, and waits up to 60 seconds for completion. .EXAMPLE $changes = Update-PatLibrary -SectionName 'Movies' -Path '/mnt/media/Movies/NewMovie' -ReportChanges $changes | Where-Object ChangeType -eq 'Added' Returns a list of items that were added or removed by the scan. .EXAMPLE Update-PatLibrary -ServerUri "http://plex.example.com:32400" -Token $myToken -SectionId 2 Refreshes library section 2 using an explicit server URI and token. Use this when you don't have the server stored in configuration. #> [CmdletBinding(DefaultParameterSetName = 'ByName', SupportsShouldProcess, ConfirmImpact = 'Medium')] param ( [Parameter(Mandatory = $true, ParameterSetName = 'ByName')] [ValidateNotNullOrEmpty()] [string] $SectionName, [Parameter(Mandatory = $true, ParameterSetName = 'ById')] [ValidateRange(1, [int]::MaxValue)] [int] $SectionId, [Parameter(Mandatory = $false, ParameterSetName = 'ById')] [Parameter(Mandatory = $false, ParameterSetName = 'ByName')] [ValidateNotNullOrEmpty()] [string] $Path, [Parameter(Mandatory = $false, ParameterSetName = 'ById')] [Parameter(Mandatory = $false, ParameterSetName = 'ByName')] [switch] $PassThru, [Parameter(Mandatory = $false, ParameterSetName = 'ById')] [Parameter(Mandatory = $false, ParameterSetName = 'ByName')] [switch] $SkipPathValidation, [Parameter(Mandatory = $false, ParameterSetName = 'ById')] [Parameter(Mandatory = $false, ParameterSetName = 'ByName')] [switch] $Wait, [Parameter(Mandatory = $false, ParameterSetName = 'ById')] [Parameter(Mandatory = $false, ParameterSetName = 'ByName')] [ValidateRange(1, 3600)] [int] $Timeout = 300, [Parameter(Mandatory = $false, ParameterSetName = 'ById')] [Parameter(Mandatory = $false, ParameterSetName = 'ByName')] [switch] $ReportChanges, [Parameter(Mandatory = $false, ParameterSetName = 'ByName')] [Parameter(Mandatory = $false, ParameterSetName = 'ById')] [string] $ServerName, [Parameter(Mandatory = $false, ParameterSetName = 'ByName')] [Parameter(Mandatory = $false, ParameterSetName = 'ById')] [ValidateNotNullOrEmpty()] [ValidateScript({ Test-PatServerUri -Uri $_ })] [string] $ServerUri, [Parameter(Mandatory = $false, ParameterSetName = 'ByName')] [Parameter(Mandatory = $false, ParameterSetName = 'ById')] [ValidateNotNullOrEmpty()] [string] $Token ) try { $serverContext = Resolve-PatServerContext -ServerName $ServerName -ServerUri $ServerUri -Token $Token } catch { throw "Failed to resolve server: $($_.Exception.Message)" } $effectiveUri = $serverContext.Uri $headers = $serverContext.Headers $usingStoredServer = -not $serverContext.WasExplicitUri # Build reusable server parameters for child cmdlet calls # This eliminates duplicated conditional logic throughout the function $serverParams = @{} if ($serverContext.WasExplicitUri) { $serverParams['ServerUri'] = $effectiveUri if ($Token) { $serverParams['Token'] = $Token } } elseif ($ServerName) { $serverParams['ServerName'] = $ServerName } # If using section name, resolve it to section ID $resolvedSectionId = $SectionId if ($PSCmdlet.ParameterSetName -eq 'ByName') { try { # If using stored server, don't pass ServerUri so Get-PatLibrary can retrieve server object with token $libParams = @{ ErrorAction = 'Stop' } + $serverParams $sections = Get-PatLibrary @libParams $matchedSection = $sections.Directory | Where-Object { $_.title -eq $SectionName } if (-not $matchedSection) { throw "No library section found with name '$SectionName'" } if ($matchedSection -is [array]) { throw "Multiple library sections found with name '$SectionName'. Please use -SectionId instead." } $resolvedSectionId = [int]($matchedSection.key -replace '.*/(\d+)$', '$1') } catch { throw "Failed to resolve section name: $($_.Exception.Message)" } } # Pre-validation: Check if path exists (default behavior, skip with -SkipPathValidation) if ($Path -and -not $SkipPathValidation) { Write-Verbose "Validating path: $Path" $testParameters = @{ Path = $Path } + $serverParams if ($resolvedSectionId) { $testParameters['SectionId'] = $resolvedSectionId } $pathValid = Test-PatLibraryPath @testParameters if (-not $pathValid) { throw "Path validation failed: '$Path' does not exist or is not within the library's configured paths. Use -SkipPathValidation to bypass this check." } Write-Verbose "Path validation passed" } # Capture before state if we need to report changes $beforeItems = $null if ($ReportChanges) { Write-Verbose "Capturing library state before scan" $getItemParameters = @{ SectionId = $resolvedSectionId } if ($effectiveUri) { $getItemParameters['ServerUri'] = $effectiveUri } $beforeItems = @(Get-PatLibraryItem @getItemParameters -ErrorAction 'SilentlyContinue') Write-Verbose "Captured $($beforeItems.Count) items before scan" } $endpoint = "/library/sections/$resolvedSectionId/refresh" $queryString = $null if ($Path) { $queryString = "path=$([System.Uri]::EscapeDataString($Path))" } $uri = Join-PatUri -BaseUri $effectiveUri -Endpoint $endpoint -QueryString $queryString if ($Path) { $target = "section $resolvedSectionId path '$Path'" } else { $target = "section $resolvedSectionId" } if ($PSCmdlet.ShouldProcess($target, 'Refresh library')) { try { Invoke-PatApi -Uri $uri -Method 'Post' -Headers $headers -ErrorAction 'Stop' # Wait for scan to complete if requested if ($Wait -or $ReportChanges) { Write-Verbose "Waiting for scan to complete (timeout: ${Timeout}s)" $waitParameters = @{ SectionId = $resolvedSectionId Timeout = $Timeout PollingInterval = 2 } if ($effectiveUri) { $waitParameters['ServerUri'] = $effectiveUri } Wait-PatLibraryScan @waitParameters Write-Verbose "Scan completed" } # Report changes if requested if ($ReportChanges) { Write-Verbose "Capturing library state after scan" $getItemParameters = @{ SectionId = $resolvedSectionId } if ($effectiveUri) { $getItemParameters['ServerUri'] = $effectiveUri } $afterItems = @(Get-PatLibraryItem @getItemParameters -ErrorAction 'SilentlyContinue') Write-Verbose "Captured $($afterItems.Count) items after scan" $changes = Compare-PatLibraryContent -Before $beforeItems -After $afterItems $changes } elseif ($PassThru) { # Return the refreshed library section $libParams = @{ SectionId = $resolvedSectionId; ErrorAction = 'Stop' } + $serverParams Get-PatLibrary @libParams } } catch { throw "Failed to refresh Plex library: $($_.Exception.Message)" } } } |