Plaster.psm1
|
data LocalizedData { # culture="en-US" ConvertFrom-StringData @' DestPath_F1=Destination path: {0} ErrorFailedToLoadStoreFile_F1=Failed to load the default value store file: '{0}'. ErrorProcessingDynamicParams_F1=Failed to create dynamic parameters from the template's manifest file. Template-based dynamic parameters will not be available until the error is corrected. The error was: {0} ErrorTemplatePathIsInvalid_F1=The TemplatePath parameter value must refer to an existing directory. The specified path '{0}' does not. ErrorUnencryptingSecureString_F1=Failed to unencrypt value for parameter '{0}'. ErrorPathDoesNotExist_F1=Cannot find path '{0}' because it does not exist. ErrorPathMustBeRelativePath_F2=The path '{0}' specified in the {1} directive in the template manifest cannot be an absolute path. Change the path to a relative path. ErrorPathMustBeUnderDestPath_F2=The path '{0}' must be under the specified DestinationPath '{1}'. ExpressionInvalid_F2=The expression '{0}' is invalid or threw an exception. Error: {1} ExpressionNonTermErrors_F2=The expression '{0}' generated error output - {1} ExpressionExecError_F2=PowerShell expression failed execution. Location: {0}. Error: {1} ExpressionErrorLocationFile_F2=<{0}> attribute '{1}' ExpressionErrorLocationModify_F1=<modify> attribute '{0}' ExpressionErrorLocationNewModManifest_F1=<newModuleManifest> attribute '{0}' ExpressionErrorLocationParameter_F2=<parameter> name='{0}', attribute '{1}' ExpressionErrorLocationRequireModule_F2=<requireModule> name='{0}', attribute '{1}' ExpressionInvalidCondition_F3=The Plaster manifest condition '{0}' failed. Location: {1}. Error: {2} InterpolationError_F3=The Plaster manifest attribute value '{0}' failed string interpolation. Location: {1}. Error: {2} FileConflict=Plaster file conflict ManifestFileMissing_F1=The Plaster manifest file '{0}' was not found. ManifestMissingDocElement_F2=The Plaster manifest file '{0}' is missing the document element. It should be specified as <plasterManifest xmlns="{1}"></plasterManifest>. ManifestMissingDocTargetNamespace_F2=The Plaster manifest file '{0}' is missing or has an invalid target namespace on the document element. It should be specified as <plasterManifest xmlns="{1}"></plasterManifest>. ManifestPlasterVersionNotSupported_F2=The template file '{0}' specifies a plasterVersion of {1} which is greater than the installed version of Plaster. Update the Plaster module and try again. ManifestSchemaInvalidAttrValue_F5=Invalid '{0}' attribute value '{1}' on '{2}' element in file '{3}'. Error: {4} ManifestSchemaInvalidCondition_F3=Invalid condition '{0}' in file '{1}'. Error: {2} ManifestSchemaInvalidChoiceDefault_F3=Invalid default attribute value '{0}' for parameter '{1}' in file '{2}'. The default value must specify a zero-based integer index that corresponds to the default choice. ManifestSchemaInvalidMultichoiceDefault_F3=Invalid default attribute value '{0}' for parameter '{1}' in file '{2}'. The default value must specify one or more zero-based integer indexes in a comma separated list that correspond to the default choices. ManifestSchemaInvalidRequireModuleAttrs_F2=The requireModule attribute 'requiredVersion' for module '{0}' in file '{1}' cannot be used together with either the 'minimumVersion' or 'maximumVersion' attribute. ManifestSchemaValidationError_F2=Plaster manifest schema error in file '{0}'. Error: {1} ManifestSchemaVersionNotSupported_F2=The template's manifest schema version ({0}) in file '{1}' requires a newer version of Plaster. Update the Plaster module and try again. ManifestErrorReading_F1=Error reading Plaster manifest: {0} ManifestNotValid_F1=The Plaster manifest '{0}' is not valid. ManifestNotValidVerbose_F1=The Plaster manifest '{0}' is not valid. Specify -Verbose to see the specific schema errors. ManifestNotWellFormedXml_F2=The Plaster manifest '{0}' is not a well-formed XML file. {1} ManifestWrongFilename_F1=The Plaster manifest filename '{0}' is not valid. The value of the Path argument must refer to a file named 'plasterManifest.xml' or 'plasterManifest_<culture>.xml'. Change the Plaster manifest filename and then try again. MissingParameterPrompt_F1=<Missing prompt value for parameter '{0}'> NewModManifest_CreatingDir_F1=Creating destination directory for module manifest: {0} OpConflict=Conflict OpCreate=Create OpForce=Force OpIdentical=Identical OpMissing=Missing OpModify=Modify OpUpdate=Update OpVerify=Verify OverwriteFile_F1=Overwrite {0} ParameterTypeChoiceMultipleDefault_F1=Parameter name {0} is of type='choice' and can only have one default value. RequireModuleVerified_F2=The required module {0}{1} is already installed. RequireModuleMissing_F2=The required module {0}{1} was not found. RequireModuleMinVersion_F1=minimum version: {0} RequireModuleMaxVersion_F1=maximum version: {0} RequireModuleRequiredVersion_F1=required version: {0} ShouldCreateNewPlasterManifest=Create Plaster manifest ShouldProcessCreateDir=Create directory ShouldProcessExpandTemplate=Expand template file ShouldProcessNewModuleManifest=Create new module manifest TempFileOperation_F1={0} into temp file before copying to destination TempFileTarget_F1=temp file for '{0}' TestPlasterNoXmlSchemaValidationWarning=The version of .NET Core that PowerShell is running on does not support XML schema-based validation. Test-PlasterManifest will operate in "limited validation" mode primarily verifying the specified manifest file is well-formed XML. For full, XML schema-based validation, run this command on Windows PowerShell. UnrecognizedParametersElement_F1=Unrecognized manifest parameters child element: {0}. UnrecognizedParameterType_F2=Unrecognized parameter type '{0}' on parameter name '{1}'. UnrecognizedContentElement_F1=Unrecognized manifest content child element: {0}. '@ } Microsoft.PowerShell.Utility\Import-LocalizedData LocalizedData -FileName Plaster.Resources.psd1 -ErrorAction SilentlyContinue # Module variables [System.Diagnostics.CodeAnalysis.SuppressMessage('PSUseDeclaredVarsMoreThanAssigments', '')] $PlasterVersion = (Test-ModuleManifest -Path $PSScriptRoot\Plaster.psd1).Version [System.Diagnostics.CodeAnalysis.SuppressMessage('PSUseDeclaredVarsMoreThanAssigments', '')] $LatestSupportedSchemaVersion = [System.Version]'1.2' [System.Diagnostics.CodeAnalysis.SuppressMessage('PSUseDeclaredVarsMoreThanAssigments', '')] $TargetNamespace = "http://www.microsoft.com/schemas/PowerShell/Plaster/v1" [System.Diagnostics.CodeAnalysis.SuppressMessage('PSUseDeclaredVarsMoreThanAssigments', '')] $DefaultEncoding = 'Default' if (($PSVersionTable.PSVersion.Major -le 5) -or ($PSVersionTable.PSEdition -eq 'Desktop') -or $IsWindows) { [System.Diagnostics.CodeAnalysis.SuppressMessage('PSUseDeclaredVarsMoreThanAssigments', '')] $ParameterDefaultValueStoreRootPath = "$env:LOCALAPPDATA\Plaster" } elseif ($IsLinux) { # https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html [System.Diagnostics.CodeAnalysis.SuppressMessage('PSUseDeclaredVarsMoreThanAssigments', '')] $ParameterDefaultValueStoreRootPath = if ($XDG_DATA_HOME) { "$XDG_DATA_HOME/plaster" } else { "$Home/.local/share/plaster" } } else { [System.Diagnostics.CodeAnalysis.SuppressMessage('PSUseDeclaredVarsMoreThanAssigments', '')] $ParameterDefaultValueStoreRootPath = "$Home/.plaster" } # Dot source the individual module command scripts. . $PSScriptRoot\NewPlasterManifest.ps1 . $PSScriptRoot\TestPlasterManifest.ps1 . $PSScriptRoot\GetPlasterTemplate.ps1 . $PSScriptRoot\InvokePlaster.ps1 Export-ModuleMember -Function *-* |