Commands/Join-PipeScript.ps1
|
function Join-PipeScript { <# .SYNOPSIS Joins PowerShell and PipeScript ScriptBlocks .DESCRIPTION Joins ScriptBlocks written in PowerShell or PipeScript. .EXAMPLE Get-Command Join-PipeScript | Join-PipeScript .EXAMPLE {param([string]$x)}, {param([string]$y)} | Join-PipeScript # Should -BeLike '*param(*$x,*$y*)*' .EXAMPLE { begin { $factor = 2 } }, { process { $_ * $factor } } | Join-PipeScript .EXAMPLE { param($x = 1) } | Join-PipeScript -ExcludeParameter x .LINK Update-PipeScript #> [Alias('Join-ScriptBlock', 'jps')] param( # A ScriptBlock written in PowerShell or PipeScript. [Parameter(Mandatory,ParameterSetName='ScriptBlock',ValueFromPipeline,ValueFromPipelineByPropertyName)] [Alias('Definition')] [ScriptBlock[]] $ScriptBlock, # A list of block types to be excluded during a merge of script blocks. # By default, no blocks will be excluded. [ValidateSet('using', 'requires', 'help','header','param','dynamicParam','begin','process','end')] [Alias('SkipBlockType','SkipBlockTypes','ExcludeBlockTypes')] [string[]] $ExcludeBlockType, # A list of block types to include during a merge of script blocks. [ValidateSet('using', 'requires', 'help','header','param','dynamicParam','begin','process','end')] [Alias('BlockType','BlockTypes','IncludeBlockTypes')] [string[]] $IncludeBlockType = @('using', 'requires', 'help','header','param','dynamicParam','begin','process','end'), # If set, will transpile the joined ScriptBlock. [switch] $Transpile, # A list of parameters to include. Can contain wildcards. # If -IncludeParameter is provided without -ExcludeParameter, all other parameters will be excluded. [string[]] $IncludeParameter, # A list of parameters to exclude. Can contain wildcards. # Excluded parameters with default values will declare the default value at the beginnning of the command. [string[]] $ExcludeParameter, # The amount of indentation to use for parameters and named blocks. By default, four spaces. [ValidateRange(0,12)] [Alias('Indentation')] [int] $Indent = 4 ) begin { # Join-PipeScript is going to join a bunch of script blocks. $AllScriptBlocks = @() # To do this 'right', we will need some little functions and filters # We'll need to indent the start of a script by a given level. filter IndentAst { $ast = $_ (' ' * ($ast | MeasureIndent)) + "$($ast.Extent)" # combine the statements a newline. } # To do that right, we'll need to Measure Indentation (based off of the least indented line) filter MeasureIndent { $ast = $_ $parentExtent = $ast.Parent.Extent if (-not $parentExtent) { return 0 } $untilLineStart = [Regex]::new('(?<=[\r\n])[\s-[\r\n]]{0,}', 'RightToLeft,Singleline') $distanceFromParent = $ast.Extent.StartOffset - $parentExtent.StartOffset return $untilLineStart.Match($parentExtent.ToString(), $distanceFromParent).Length } } process { # Our process block is fairly simple, we just collect the [ScriptBlock]s as they come in if ($ScriptBlock) { $AllScriptBlocks += $ScriptBlock } } end { # Before we go too far, we want both -BlockType and -ExcludeBlockType to work. # and they are both lists with the same finite set of values, # we can simply filter out any -BlockType that are in -ExcludeBlockType. if ($ExcludeBlockType) { foreach ($skipBlock in $ExcludeBlockType) { if ($IncludeBlockType -contains $skipBlock) { $IncludeBlockType = $IncludeBlockType -ne $skipBlock } } } # Now we collect all of the script blocks to merge $AllScriptBlocks = @( foreach ($toMerge in $AllScriptBlocks) { if ($toMerge -match '^\s{0,}$') { continue } # If the script block had a body (aka a function definition), join the body. if ($toMerge.Ast.body) { [ScriptBlock]::Create($toMerge.Ast.Body.Extent.ToString() -replace '^\{' -replace '\}$') } else { $toMerge } }) $NamedBlocks = @() # If we have any other named blocks than end, we need to close the end block. # So set up a boolean to track this. [bool]$closeEndBlock = $false # If we're including headers or help if ($IncludeBlockType -contains 'Header' -or $IncludeBlockType -contains 'Help') { $allHeaderBlocks = @( # walk over each parameter block foreach ($combined in $AllScriptBlocks.Ast.ParamBlock) { if (-not $combined.Parent.Extent) { continue } # and extract the difference between the parent and the start of the block $offsetDifference = $combined.Extent.StartOffset - $combined.Parent.Extent.StartOffset # (this is where the header and help reside) # try to strip off leading braces and whitespace $headerblock = $combined.Parent.Extent.ToString().Substring(0, $offsetDifference) -replace '^[\r\n\s]{0,}\{' # and remove blank lines $headerblock = $headerblock -split '(?>\r\n|\n)' -notmatch '^\s{0,}$' -join [Environment]::NewLine $headerblock } ) # If we had any header blocks if ($allHeaderBlocks) { # We need to sort the header and the help. # To do this, we can use this regex to find block comments. $helpRegex = [Regex]::New(' \<\# # The opening tag (?<Block> (?:.|\s)+?(?=\z|\#>) # anything until the closing tag ) \#\> # the closing tag ', 'IgnoreCase,IgnorePatternWhitespace','00:00:05') # Now keep track of the rest of the headers and the combined help. $restOfHeaders = @() $combinedHelp = @() # Walk over each header block foreach ($headerblock in $allHeaderBlocks) { # If the block had help if ($headerblock -match $helpRegex) { $combinedHelp += $matches.Block # add it to combined help # and remove it to get the rest of the headers. $restOfHeaders += $headerblock -replace $helpRegex } else { # otherwise, just add the block to the headers. $restOfHeaders += $headerblock } } # Now, collect all of the header blocks $allHeaderBlocks = @( # If we're including -Help and we have $combinedHelp if ($IncludeBlockType -contains 'Help' -and $combinedHelp) { (' ' * $Indent) + "<#" # create a comment block $combinedHelp -split '(?>\r\n|\n)' -join (' ' * $Indent) + [Environment]::NewLine # and join the content. (' ' * $Indent) + '#>' } ) + @( # If we're including headers, add the rest of the headers. if ($IncludeBlockType -contains 'Header') { (' ' * $Indent) + ( $restOfHeaders -split '(?>\r\n|\n)' -join (' ' * $Indent) + [Environment]::NewLine ) } ) # Now that the header is sorted, we're ready to join the script. } } #region Joining the Scripts # To join the scripts, we want to go thru block type by block type. $joinScriptLines = @( # First _have_ to be using statements. $allUsingLines = @( if ($IncludeBlockType -contains 'using') { foreach ($usingStatement in $AllScriptBlocks.Ast.UsingStatements) { # They are easy: just .ToString() their extent. $usingStatement.Extent.ToString() } } ) $allUsingLines $allRequireStatements = @( # Next we have requirements if ($IncludeBlockType -contains 'requires') { # unfortunately, these do not have an easy .ToString() # (this is why the type has been extended to have a .Script property (#234)) foreach ($requirement in $AllScriptBlocks.Ast.ScriptRequirements) { if (-not $requirement) { continue } $requirement.Script.ToString() } } ) $allRequireStatements # If we're including header or help, we'll want to include whatever blocks we have. # (if you recall, we've already filtered this list). if ($IncludeBlockType -contains 'header' -or $IncludeBlockType -contains 'help') { $allHeaderBlocks } # param is probably the trickiest section, but since we're building this script from top to bottom # it's next on the list. # We _might_ need to add some statements to the script (because of -Include/ExcludeParameter) $StatementsToAdd = @() if ($IncludeBlockType -contains 'param') { # To start off with, this is the first block we need to name and indent # (at least, if we have any parameter blocks) $allParamBlocks = @( if (@($AllScriptBlocks.Ast.ParamBlock) -ne $null) { # if we do, use the first non-null parameter block to determine the indentation level. ' ' * (@(@($AllScriptBlocks.Ast.ParamBlock) -ne $null)[0] | MeasureIndent) + "param(" } # Ok, next we go thru each script block and combine the parameters. # Because a parameter may appear more than once, we need to keep track of which ones we have alreadyIncluded. $alreadyIncludedParameter = [Ordered]@{} # Now we walk over each param block, and collect output into $paramOut as we go. $paramOut = @(foreach ($paramBlock in $AllScriptBlocks.Ast.ParamBlock) { # The parameter index for each set of parameters is important, because it dictates where we look for help. $parameterIndex = 0 # Now we walk over the parameters from a given paramblock foreach ($parameter in $paramBlock.parameters) { # and we determine the name of each parameter. $variableName = $parameter.Name.VariablePath.ToString() # With the name in hand, we can check -IncludeParameter and -ExcludeParameter if ($IncludeParameter -or $ExcludeParameter) { $shouldIncludeParameter = # If -IncludeParameter was not specified if (-not $IncludeParameter) { $true } # we should include it else { # otherwise we only include it if any of the wildcards match. foreach ($inc in $IncludeParameter) { if ($variableName -like $inc) { $true;break } } } # We should only -Exclude if any of the wildcards match. $shouldExcludeParameter = foreach ($exc in $ExcludeParameter) { if ($variableName -like $exc) { $true; break } } # If we shouldn't include or should exclude any given parameter if (-not $shouldIncludeParameter -or $shouldExcludeParameter) { # check for a default value if ($parameter.DefaultValue) { # and add it to the statements to add. $statementsToAdd += "`$$($variableName) = $($parameter.DefaultValue)" } $parameterIndex++ continue } } # If we had not already included the parameter if (-not $alreadyIncludedParameter[$variableName]) { # Get the parameter's inline help. $inlineParameterHelp = # For the first parameter, this is if ($parameterIndex -eq 0) { # For the first parameter $parentExtent = $parameter.Parent.Extent.ToString() # This starts after the first parenthesis. $afterFirstParens = $parentExtent.IndexOf('(') + 1 # and goes until the start of the parameter. $parentExtent.Substring($afterFirstParens, $parameter.Extent.StartOffset - $parameter.Parent.Extent.StartOffset - $afterFirstParens) -replace '^[\s\r\n]+' # (don't forget to trim leading whitespace) } else { # for every other parameter it is the content between parameters. $lastParameter = $parameter.Parent.Parameters[$parameterIndex - 1] $relativeOffset = $lastParameter.Extent.EndOffset + 1 - $parameter.Parent.Extent.StartOffset $distance = $parameter.Extent.StartOffset - $lastParameter.Extent.EndOffset - 1 # (don't forget to trim leading whitespace and commas) $parameter.Parent.Extent.ToString().Substring($relativeOffset,$distance) -replace '^[\,\s\r\n]+' } $inlineParameterHelp = $inlineParameterHelp -split '(?>\r\n|\n)' -join ( (' ' * $indent) + [Environment]::NewLine ) # Then output the included parameter. $alreadyIncludedParameter[$variableName] = $inlineParameterHelp + $parameter.Extent.ToString() $alreadyIncludedParameter[$variableName] } else { $oldParam = "param (" + [Environment]::NewLine + $($alreadyIncludedParameter[$variableName]) + [Environment]::NewLine + ")" $oldParamScriptBlock = [ScriptBlock]::Create($oldParam) $oldParameter = $oldParamScriptBlock.Ast.ParamBlock.Parameters[0] # For the moment, parameters are not merged. This could be improved upon. } $parameterIndex++ } }) # Join all parameters by a comma, two newlines, and four indented spaces. (' ' * $Indent) + ( $paramOut -notmatch '^[\s\r\n]$' -join (',' + ([Environment]::NewLine * 2) + (' ' * $Indent)) ) # and close out the parameter block. if (@($AllScriptBlocks.Ast.ParamBlock) -ne $null) { ' ' * (@(@($AllScriptBlocks.Ast.ParamBlock) -ne $null)[0] | MeasureIndent) + ")" } ) $allParamBlocks $NamedBlocks += 'param' } elseif ($IncludeBlockType -contains 'Header' -or $IncludeBlockType -contains 'Help') { 'param()' } # We can do the next three blocks the same way: foreach ($BlockName in 'dynamicParam','begin','process') { # We need to walk thru each named block of a given ScriptBlock # (unless they're not in the list) if ($IncludeBlockType -notcontains $BlockName) { continue } $blocks = @($AllScriptBlocks.Ast."${BlockName}Block") if ($blocks -ne $null) { # If any of these block names exist, we will need to close the end block (if it exists). $NamedBlocks += $BlockName $closeEndBlock = $true $blockOpen = $false foreach ($block in $blocks) { if (-not $block) { continue } # (skipping ones that are empty) if (-not $blockOpen) { # If the block hasn't been opened yet $blockOpen = $true # open it if ($StatementsToAdd) { $StatementsToAdd -join [Environment]::NewLine (' ' * $indent) + ( $block.Extent.ToString() -replace "^$blockName\s{0,}\{" -replace '\}$' ) $StatementsToAdd = $null } else { (' ' * $indent) + ( ($block | IndentAst) -replace '\}$' # and remove trailing curly braces. ) } } else { # Otherwise, get the block content, removing the opening and closing braces. $block.Extent.ToString() -replace "^$blockName\s{0,}\{" -replace '\}$' } } ' ' * ([Math]::Max($indent,($block | MeasureIndent))) + '}' } } if ($IncludeBlockType -contains 'end') { # If there were end blocks declared $blocks = @($AllScriptBlocks.Ast.EndBlock) if ($blocks -ne $null) { $blockOpen = $false # see if there was anything in them. $unnamedBlocks = @($blocks.Unnamed) foreach ($block in $blocks) { if (-not $block) { continue } # Empty(ish) scripts may have an end bock that is an empty param block if ($block -match '^\s{0,}param\(\s{0,}\)\s{0,}$') { continue } # (skip those). if (-not $blockOpen -and -not $block.Unnamed) { # If the end block was named, it will need to be closed. if ($StatementsToAdd) { $StatementsToAdd -join [Environment]::NewLine $block.Extent.ToString() -replace '^end\s{0,}\{' -replace '\}$' -replace '^param\(\)[\s\r\n]{0,}' $StatementsToAdd = $null } else { ($block | IndentAst) -replace '\}$' # and remove trailing curly braces. } $closeEndBlock = $true $blockOpen = $true } elseif ($block.Statements.Count) { # where as if it is a series of statements, it doesn't necessarily need to be. # Unless it's the first block and it's unnamed, and other blocks are named. if ($block.Unnamed -and -not $blockOpen -and $unnamedBlocks.Length -ne $blocks.Length) { ' ' * ($block | MeasureIndent) + 'end {' $blockOpen = $true $closeEndBlock = $false } if ($StatementsToAdd) { $StatementsToAdd -join [Environment]::NewLine $StatementsToAdd = $null } # If the block was unnamed if ($block.Unnamed) { # check to see if there were any paramters declared if ($block.Parent.ParamBlock.Parameters) { # because for some silly reason, the AST _loves_ to include that in the end block as well $block.Extent.ToString().Substring($block.Parent.ParamBlock.Extent.ToString().Length) -replace '[\s\r\n]{0,}$' # (don't forget to trim trailing whitespace). } else { # If no parameters were declared, remove the empty param() block. $block.Extent.ToString() -replace '^param\(\)[\s\r\n]{0,}' } } else { # If the block was named $block.Extent.ToString() -replace # Strip the 'end' and braces '^end\s{0,}\{' -replace '\}$' -replace '^param\(\)[\s\r\n]{0,}' # and any empty param blocks. } } } if ($StatementsToAdd) { if ($closeEndBlock -and -not $blockOpen) { 'end {' $blockOpen = $true } $StatementsToAdd -join [Environment]::NewLine $StatementsToAdd = $null } # If we need to close the end block, and it is open, if ($closeEndBlock -and $blockOpen) { if ($block.Statements.Count) { ' ' * ($block | MeasureIndent) + '}' # close it. } else { ' }' } } } } ) $joinedScript = $joinScriptLines -join [Environment]::NewLine #endregion Joining the Scripts $combinedScriptBlock = [scriptblock]::Create($joinedScript) if ($combinedScriptBlock -and $Transpile) { $combinedScriptBlock | .>Pipescript } elseif ($combinedScriptBlock) { $combinedScriptBlock } else { $joinScriptLines -join [Environment]::NewLine } } } |