Install-Piecemeal.ps1
|
function Install-Piecemeal { <# .Synopsis Installs Piecemeal .Description Installs Piecemeal into a module. This enables extensibility within the module. .Notes This returns a modified Get-Extension .Example Install-Piecemeal -ExtensionModule RoughDraft -ExtensionModuleAlias rd -ExtensionTypeName RoughDraft.Extension .Link Get-Extension #> [OutputType([string])] param( # The name of the module that is being extended. [Parameter(Mandatory,ValueFromPipelineByPropertyName)] [string] $ExtensionModule, # The verbs to install. By default, installs Get. [Parameter(ValueFromPipelineByPropertyName=$true)] [ValidateSet('Get')] [string[]] $Verb = @('Get'), # One or more aliases used to refer to the module being extended. [Parameter(ValueFromPipelineByPropertyName)] [string[]] $ExtensionModuleAlias, # If provided, will override the default extension name regular expression # (by default '(extension|ext|ex|x)\.ps1$' ) [Parameter(ValueFromPipelineByPropertyName)] [Alias('ExtensionNameRegEx')] [string] $ExtensionPattern = '(?<!-)(extension|ext|ex|x)\.ps1$', # The type name to add to an extension. This can be used to format the extension. [Parameter(ValueFromPipelineByPropertyName)] [string] $ExtensionTypeName, # The noun used for any extension commands. [Parameter(ValueFromPipelineByPropertyName)] [string] $ExtensionNoun, # If set, will require a [Runtime.CompilerServices.Extension()] to be considered an extension. [Parameter(ValueFromPipelineByPropertyName)] [switch] $RequireExtensionAttribute, # If set, will require a [Management.Automation.Cmdlet] attribute to be considered an extension. # This attribute can associate the extension with one or more commands. [Parameter(ValueFromPipelineByPropertyName)] [switch] $RequireCmdletAttribute, # The output path. # If provided, contents will be written to the output path with Set-Content # Otherwise, contents will be returned. [Parameter(ValueFromPipelineByPropertyName)] [string] $OutputPath ) begin { $myModule = $MyInvocation.MyCommand.Module ${?<CurlyBrace>} = [Regex]::new('{(?<TrailingWhitespace>\s{0,})(?<Newline>[\r\n]{0,})?(?<Indent>\s{0,})?','Multiline') ${?<Indent>} = [Regex]::new('^\s{0,}', 'Multiline,RightToLeft') } process { $myParams = [Ordered]@{} + $PSBoundParameters $myOutput = [Text.StringBuilder]::new() # Walk over each command this module exports. foreach ($exported in $myModule.ExportedCommands.Values) { # If the command is not a verb we're exporting, skip it. if ($exported.Verb -notin $Verb) { continue } # Copy the original text $commandString = $exported.ScriptBlock.Ast.ToString() # get the tokens (which have comments) $commandTokens = [Management.Automation.PSParser]::Tokenize($commandString, [ref]$null) # and get the parameters from the abstract syntax tree. $paramsAst = $exported.ScriptBlock.Ast.FindAll({param($ast) $ast -is [Management.Automation.Language.ParameterAst]}, $true) # Create a collection of default parameters and their values. # We will declare these as variables within the copy of the function. $defaultParameters = [Ordered]@{} $skipParameters = @( # Next, make a list of parameters we will skip foreach ($statement in $paramsAst) { # (any parameters declared by this function). if ($statement.Name.VariablePath.UserPath -and $MyInvocation.MyCommand.Parameters[$statement.Name.VariablePath.UserPath] ) { $statement } } ) # Now we start modifying the script $lengthChange = 0 # (keeping track of how much we change the length) #region Extract Skipped Parameters foreach ($skipParam in $skipParameters) { # Keep track of what we're skipping $toSkip = $skipParam.Extent if ($skipParam.DefaultValue) { # If it had a default value $defaultParameters["$($skipParam.Name)"] = "$($skipParam.DefaultValue)" # save it for later. } # Determine the figure out the length of the removal, according to the AST. $removeLength = $toSkip.EndOffset - $toSkip.StartOffset # If the parameter we're removing was immediately followed by a comma $immediatelyFollowedBy = $commandString[$toSkip.StartOffset + $removeLength - $lengthChange] if ($immediatelyFollowedBy -eq ',') { $removeLength += 1 # adjust the removed length } # Find all of the tokens that came before this point $beforeTokens = @($commandTokens | Where-Object Start -lt $toSkip.StartOffset) for ($i = -1; $i -gt -$beforeTokens.Length; $i--) { # we'll also want to remove any newlines or comments above the parameter if ($beforeTokens[$i].Type -notin 'Comment','Newline') { break } } # Adjust the pointer accordingly $realStart = $beforeTokens[$i - 1].Start + $beforeTokens[$i - 1].Length + 1 $removeLength += $toSkip.StartOffset - $realStart # Remove the content $changed = $commandString.Remove( $realStart - $lengthChange, $removeLength ) # Keep track of how much was removed $lengthChange += $removeLength # And update the command $commandString = $changed } #endregion Extract Skipped Parameters $insertIntoBlock = # We will insert parameters into the the first block that will run. foreach ($blockName in 'DynamicParam', 'Begin', 'Process', 'End') { if ($exported.ScriptBlock.Ast.Body."${blockName}Block") { $exported.ScriptBlock.Ast.Body."${blockName}Block"; break } } # Our pointer starts at the beginning of the block (minus what we've removed, plus the name of the block's length) $insertPoint = $insertIntoBlock.Extent.StartOffset - $lengthChange + "$($insertIntoBlock.BlockKind.Length)" # We find the next curly brace $foundCurly = ${?<CurlyBrace>}.Match($commandString, $insertPoint) $indentLevel = 0 if ($foundCurly.Success) { $insertPoint = $foundCurly.Index + $foundCurly.Length # then adjust our insertion point by this $indentLevel = ${?<Indent>}.Match($commandString, $insertPoint).Length # determine the indent $insertPoint -= $indentLevel # and then subtract it so we're inserting at the beginning of the line. } # Walk over each parameter passed in. foreach ($myParam in $myParams.GetEnumerator()) { $defaultParameters["`$$($myParam.Key)"] = # and assign them a default value. if ($null -ne ($myParam.Value -as [float])) { "$($myParam.Value)" } elseif ($myParam.Value -is [Array]) { "'$(@(foreach ($v in $myParam.Value) { "$v".Replace("'","''") }) -join "','")'" } else { "'$($myParam.Value.ToString().Replace("'","''"))'" } } $insertion = # Then, take all parameters that would be exported by the command @(foreach ($defaultParam in $defaultParameters.GetEnumerator()) { if (-not $exported.Parameters.($defaultParam.Key -replace '^\$')) { continue } # and put one declaration per line. "$(' ' * $indentLevel)$($defaultParam.Key) = $($defaultParam.Value)" }) -join [Environment]::NewLine # Add one more newline so that the original text is still indented. $insertion += [Environment]::NewLine $extensionCommandReplacement = if ($ExtensionNoun) { "`$1-$ExtensionNoun" } else { "`$1-$ExtensionModule`$2" } $extensionVariableReplacer = if ($ExtensionNoun) { "`$script:${ExtensionNoun}s" } else { "`$script:${ExtensionModule}Extensions" } $newCommand = $commandString.Insert($insertPoint, $insertion) -replace # Finally, we insert the default values "($($exported.Verb))-($($exported.Noun))", $extensionCommandReplacement -replace # change the name '\$script:Extensions', $extensionVariableReplacer -replace # change the inner variable references, " Extensions ", " $ExtensionModule Extensions " # and update likely documentation mentions $null = $myOutput.AppendLine($newCommand) } $myOutput = if (-not $NoLogo) { $installInstructions = @( "(Install-Module $($myModule.Name); $($MyInvocation.MyCommand.Name)" $(if ($myParams.Verb) {"-Verb $($verb -join ',')"}) @(foreach ($kv in $myParams.GetEnumerator()) { if ($kv.Value -is [switch] -and $kv.Value) { "-$($kv.Key)" } elseif ($kv.Value -is [string]) { "-$($kv.Key) '$($kv.Value)'" } elseif ($kv.Value -is [string[]]) { "-$($kv.Key) '$($kv.Value -join "','")'" } }) | Sort-Object ')' ) -join ' ' $logo = @( $myModule.Name '[' $myModule.Version ']' ':' $myModule.Description ) -join ' ' $null = $myOutput.Insert(0, ("#region $logo" + [Environment]::NewLine + "# $installInstructions" + [Environment]::NewLine)) $null = $myOutput.AppendLine("#endregion $logo") "$myOutput" } else { "$myOutput" } if ($OutputPath) { $myOutput | Set-Content -Path $OutputPath } else { $myOutput } } } |