formats/FileExtensionInfo.format.ps1xml
|
<!--
Format type data generated 08/13/2021 12:00:43 by PROSPERO\Jeff This formats the output from the Get-FileExtensionInfo function This file was created using the New-PSFormatXML command that is part of the PSScriptTools module. https://github.com/jdhitsolutions/PSScriptTools --> <Configuration> <ViewDefinitions> <View> <!--Created 08/13/2021 12:00:43 by PROSPERO\Jeff--> <Name>default</Name> <ViewSelectedBy> <TypeName>FileExtensionInfo</TypeName> </ViewSelectedBy> <GroupBy> <!-- You can also use a scriptblock to define a custom property name. You must have a Label tag. <ScriptBlock>$_.machinename.toUpper()</ScriptBlock> <Label>Computername</Label> Use <Label> to set the displayed value. <PropertyName>Path</PropertyName> --> <ScriptBlock> "{0} [{1}]" -f $_.Path,$_.Computername</ScriptBlock> <Label>Path</Label> </GroupBy> <TableControl> <!--Delete the AutoSize node if you want to use the defined widths.--> <AutoSize /> <TableHeaders> <TableColumnHeader> <Label>Extension</Label> <Width>12</Width> <Alignment>left</Alignment> </TableColumnHeader> <TableColumnHeader> <Label>Count</Label> <Width>8</Width> <Alignment>right</Alignment> </TableColumnHeader> <TableColumnHeader> <Label>TotalSize</Label> <Width>12</Width> <Alignment>right</Alignment> </TableColumnHeader> <TableColumnHeader> <Label>Smallest</Label> <Width>15</Width> <Alignment>right</Alignment> </TableColumnHeader> <TableColumnHeader> <Label>Average</Label> <Width>19</Width> <Alignment>right</Alignment> </TableColumnHeader> <TableColumnHeader> <Label>Largest</Label> <Width>14</Width> <Alignment>right</Alignment> </TableColumnHeader> </TableHeaders> <TableRowEntries> <!-- Display the largest extension with the largest total size in RED using ANSI--> <TableRowEntry> <TableColumnItems> <!-- By default the entries use property names, but you can replace them with scriptblocks. <ScriptBlock>$_.foo /1mb -as [int]</ScriptBlock> --> <TableColumnItem> <ScriptBlock> if ($host.name -match "console|code|remote" -AND $_.IsLargest) { "`e[38;5;199m$($_.Extension)`e[0m" } else { $_.Extension } </ScriptBlock> </TableColumnItem> <TableColumnItem> <ScriptBlock> if ($host.name -match "console|code|remote" -AND $_.IsLargest) { "`e[38;5;199m$($_.Count)`e[0m" } else { $_.Count } </ScriptBlock> </TableColumnItem> <TableColumnItem> <ScriptBlock> if ($host.name -match "console|code|remote" -AND $_.IsLargest) { "`e[38;5;199m$($_.TotalSize)`e[0m" } else { $_.TotalSize } </ScriptBlock> </TableColumnItem> <TableColumnItem> <ScriptBlock> if ($host.name -match "console|code|remote" -AND $_.IsLargest) { "`e[38;5;199m$($_.SmallestSize)`e[0m" } else { $_.SmallestSize } </ScriptBlock> </TableColumnItem> <TableColumnItem> <ScriptBlock> $avg = [math]::Round($_.AverageSize,2) if ($host.name -match "console|code|remote" -AND $_.IsLargest) { "`e[38;5;199m$($avg)`e[0m" } else { $avg } </ScriptBlock> </TableColumnItem> <TableColumnItem> <ScriptBlock> if ($host.name -match "console|code|remote" -AND $_.IsLargest) { "`e[38;5;199m$($_.LargestSize)`e[0m" } else { $_.LargestSize } </ScriptBlock> </TableColumnItem> </TableColumnItems> </TableRowEntry> </TableRowEntries> </TableControl> </View> <View> <!--Created 08/13/2021 12:39:36 by PROSPERO\Jeff--> <Name>TotalKB</Name> <ViewSelectedBy> <TypeName>FileExtensionInfo</TypeName> </ViewSelectedBy> <GroupBy> <!-- You can also use a scriptblock to define a custom property name. You must have a Label tag. <ScriptBlock>$_.machinename.toUpper()</ScriptBlock> <Label>Computername</Label> Use <Label> to set the displayed value. --> <PropertyName>Path</PropertyName> <Label>Path</Label> </GroupBy> <TableControl> <!--Delete the AutoSize node if you want to use the defined widths. <AutoSize />--> <TableHeaders> <TableColumnHeader> <Label>Extension</Label> <Width>12</Width> <Alignment>left</Alignment> </TableColumnHeader> <TableColumnHeader> <Label>Count</Label> <Width>8</Width> <Alignment>right</Alignment> </TableColumnHeader> <TableColumnHeader> <Label>TotalKB</Label> <Width>12</Width> <Alignment>right</Alignment> </TableColumnHeader> </TableHeaders> <TableRowEntries> <TableRowEntry> <TableColumnItems> <!-- By default the entries use property names, but you can replace them with scriptblocks. <ScriptBlock>$_.foo /1mb -as [int]</ScriptBlock> --> <TableColumnItem> <PropertyName>Extension</PropertyName> </TableColumnItem> <TableColumnItem> <PropertyName>Count</PropertyName> </TableColumnItem> <TableColumnItem> <ScriptBlock>[math]::Round($_.TotalSize/1KB,2)</ScriptBlock> </TableColumnItem> </TableColumnItems> </TableRowEntry> </TableRowEntries> </TableControl> </View> <View> <!--Created 08/13/2021 12:39:36 by PROSPERO\Jeff--> <Name>TotalMB</Name> <ViewSelectedBy> <TypeName>FileExtensionInfo</TypeName> </ViewSelectedBy> <GroupBy> <!-- You can also use a scriptblock to define a custom property name. You must have a Label tag. <ScriptBlock>$_.machinename.toUpper()</ScriptBlock> <Label>Computername</Label> Use <Label> to set the displayed value. --> <PropertyName>Path</PropertyName> <Label>Path</Label> </GroupBy> <TableControl> <!--Delete the AutoSize node if you want to use the defined widths. <AutoSize />--> <TableHeaders> <TableColumnHeader> <Label>Extension</Label> <Width>12</Width> <Alignment>left</Alignment> </TableColumnHeader> <TableColumnHeader> <Label>Count</Label> <Width>8</Width> <Alignment>right</Alignment> </TableColumnHeader> <TableColumnHeader> <Label>TotalMB</Label> <Width>12</Width> <Alignment>right</Alignment> </TableColumnHeader> </TableHeaders> <TableRowEntries> <TableRowEntry> <TableColumnItems> <!-- By default the entries use property names, but you can replace them with scriptblocks. <ScriptBlock>$_.foo /1mb -as [int]</ScriptBlock> --> <TableColumnItem> <PropertyName>Extension</PropertyName> </TableColumnItem> <TableColumnItem> <PropertyName>Count</PropertyName> </TableColumnItem> <TableColumnItem> <ScriptBlock>[math]::Round($_.TotalSize/1MB,2)</ScriptBlock> </TableColumnItem> </TableColumnItems> </TableRowEntry> </TableRowEntries> </TableControl> </View> </ViewDefinitions> </Configuration> |