PSSailpoint

1.0.1

beta/src/PSSailpointBeta/Api/BetaCertificationsApi.ps1

#
# IdentityNow Beta API
# Use these APIs to interact with the IdentityNow platform to achieve repeatable, automated processes with greater scalability. These APIs are in beta and are subject to change. We encourage you to join the SailPoint Developer Community forum at https://developer.sailpoint.com/discuss to connect with other developers using our APIs.
# Version: 3.1.0-beta
# Generated by OpenAPI Generator: https://openapi-generator.tech
#

<#
.SYNOPSIS

Permissions for Entitlement Certification Item

.DESCRIPTION

No description available.

.PARAMETER CertificationId
The certification ID

.PARAMETER ItemId
The certification item ID

.PARAMETER Filters
Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results) Supported fields and primitive operators: **target**: *eq, sw* **rights**: *ca* Supported composite operators: *and, or* All field values (second filter operands) are case-insensitive for this API. Only a single *and* or *or* composite filter operator may be used. It must also be used between a target filter and a rights filter, not between 2 filters for the same field. For example, The following is valid: *?filters=rights+ca+(%22CREATE%22)+and+target+eq+%22SYS.OBJAUTH2%22* The following is invalid: *?filters=rights+ca+(%22CREATE%22)+and+rights+ca+(%SELECT%22)*

.PARAMETER Limit
Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information.

.PARAMETER Offset
Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information.

.PARAMETER Count
If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored. Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information.

.PARAMETER WithHttpInfo

A switch when turned on will return a hash table of Response, StatusCode and Headers instead of just the Response

.OUTPUTS

PermissionDto[]
#>
function Get-BetaIdentityCertificationItemPermissions {
    [CmdletBinding()]
    Param (
        [Parameter(Position = 0, ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${CertificationId},
        [Parameter(Position = 1, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${ItemId},
        [Parameter(Position = 2, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${Filters},
        [Parameter(Position = 3, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [System.Nullable[Int32]]
        ${Limit},
        [Parameter(Position = 4, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [System.Nullable[Int32]]
        ${Offset},
        [Parameter(Position = 5, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [System.Nullable[Boolean]]
        ${Count},
        [Switch]
        $WithHttpInfo
    )

    Process {
        'Calling method: Get-BetaIdentityCertificationItemPermissions' | Write-Debug
        $PSBoundParameters | Out-DebugParameter | Write-Debug

        $LocalVarAccepts = @()
        $LocalVarContentTypes = @()
        $LocalVarQueryParameters = @{}
        $LocalVarHeaderParameters = @{}
        $LocalVarFormParameters = @{}
        $LocalVarPathParameters = @{}
        $LocalVarCookieParameters = @{}
        $LocalVarBodyParameter = $null

        $Configuration = Get-BetaConfiguration
        # HTTP header 'Accept' (if needed)
        $LocalVarAccepts = @('application/json')

        $LocalVarUri = '/certifications/{certificationId}/access-review-items/{itemId}/permissions'
        if (!$CertificationId) {
            throw "Error! The required parameter `CertificationId` missing when calling getIdentityCertificationItemPermissions."
        }
        $LocalVarUri = $LocalVarUri.replace('{certificationId}', [System.Web.HTTPUtility]::UrlEncode($CertificationId))
        if (!$ItemId) {
            throw "Error! The required parameter `ItemId` missing when calling getIdentityCertificationItemPermissions."
        }
        $LocalVarUri = $LocalVarUri.replace('{itemId}', [System.Web.HTTPUtility]::UrlEncode($ItemId))

        if ($Filters) {
            $LocalVarQueryParameters['filters'] = $Filters
        }

        if ($Limit) {
            $LocalVarQueryParameters['limit'] = $Limit
        }

        if ($Offset) {
            $LocalVarQueryParameters['offset'] = $Offset
        }

        if ($Count) {
            $LocalVarQueryParameters['count'] = $Count
        }



        $LocalVarResult = Invoke-BetaApiClient -Method 'GET' `
                                -Uri $LocalVarUri `
                                -Accepts $LocalVarAccepts `
                                -ContentTypes $LocalVarContentTypes `
                                -Body $LocalVarBodyParameter `
                                -HeaderParameters $LocalVarHeaderParameters `
                                -QueryParameters $LocalVarQueryParameters `
                                -FormParameters $LocalVarFormParameters `
                                -CookieParameters $LocalVarCookieParameters `
                                -ReturnType "PermissionDto[]" `
                                -IsBodyNullable $false

        if ($WithHttpInfo.IsPresent) {
            return $LocalVarResult
        } else {
            return $LocalVarResult["Response"]
        }
    }
}

<#
.SYNOPSIS

Pending Certification Tasks

.DESCRIPTION

No description available.

.PARAMETER Id
The identity campaign certification ID

.PARAMETER WithHttpInfo

A switch when turned on will return a hash table of Response, StatusCode and Headers instead of just the Response

.OUTPUTS

IdentityCertificationTask[]
#>
function Get-BetaIdentityCertificationPendingTasks {
    [CmdletBinding()]
    Param (
        [Parameter(Position = 0, ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${Id},
        [Switch]
        $WithHttpInfo
    )

    Process {
        'Calling method: Get-BetaIdentityCertificationPendingTasks' | Write-Debug
        $PSBoundParameters | Out-DebugParameter | Write-Debug

        $LocalVarAccepts = @()
        $LocalVarContentTypes = @()
        $LocalVarQueryParameters = @{}
        $LocalVarHeaderParameters = @{}
        $LocalVarFormParameters = @{}
        $LocalVarPathParameters = @{}
        $LocalVarCookieParameters = @{}
        $LocalVarBodyParameter = $null

        $Configuration = Get-BetaConfiguration
        # HTTP header 'Accept' (if needed)
        $LocalVarAccepts = @('application/json')

        $LocalVarUri = '/certifications/{id}/tasks-pending'
        if (!$Id) {
            throw "Error! The required parameter `Id` missing when calling getIdentityCertificationPendingTasks."
        }
        $LocalVarUri = $LocalVarUri.replace('{id}', [System.Web.HTTPUtility]::UrlEncode($Id))



        $LocalVarResult = Invoke-BetaApiClient -Method 'GET' `
                                -Uri $LocalVarUri `
                                -Accepts $LocalVarAccepts `
                                -ContentTypes $LocalVarContentTypes `
                                -Body $LocalVarBodyParameter `
                                -HeaderParameters $LocalVarHeaderParameters `
                                -QueryParameters $LocalVarQueryParameters `
                                -FormParameters $LocalVarFormParameters `
                                -CookieParameters $LocalVarCookieParameters `
                                -ReturnType "IdentityCertificationTask[]" `
                                -IsBodyNullable $false

        if ($WithHttpInfo.IsPresent) {
            return $LocalVarResult
        } else {
            return $LocalVarResult["Response"]
        }
    }
}

<#
.SYNOPSIS

Certification Task Status

.DESCRIPTION

No description available.

.PARAMETER Id
The identity campaign certification ID

.PARAMETER TaskId
The certification task ID

.PARAMETER WithHttpInfo

A switch when turned on will return a hash table of Response, StatusCode and Headers instead of just the Response

.OUTPUTS

IdentityCertificationTask
#>
function Get-BetaIdentityCertificationTaskStatus {
    [CmdletBinding()]
    Param (
        [Parameter(Position = 0, ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${Id},
        [Parameter(Position = 1, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${TaskId},
        [Switch]
        $WithHttpInfo
    )

    Process {
        'Calling method: Get-BetaIdentityCertificationTaskStatus' | Write-Debug
        $PSBoundParameters | Out-DebugParameter | Write-Debug

        $LocalVarAccepts = @()
        $LocalVarContentTypes = @()
        $LocalVarQueryParameters = @{}
        $LocalVarHeaderParameters = @{}
        $LocalVarFormParameters = @{}
        $LocalVarPathParameters = @{}
        $LocalVarCookieParameters = @{}
        $LocalVarBodyParameter = $null

        $Configuration = Get-BetaConfiguration
        # HTTP header 'Accept' (if needed)
        $LocalVarAccepts = @('application/json')

        $LocalVarUri = '/certifications/{id}/tasks/{taskId}'
        if (!$Id) {
            throw "Error! The required parameter `Id` missing when calling getIdentityCertificationTaskStatus."
        }
        $LocalVarUri = $LocalVarUri.replace('{id}', [System.Web.HTTPUtility]::UrlEncode($Id))
        if (!$TaskId) {
            throw "Error! The required parameter `TaskId` missing when calling getIdentityCertificationTaskStatus."
        }
        $LocalVarUri = $LocalVarUri.replace('{taskId}', [System.Web.HTTPUtility]::UrlEncode($TaskId))



        $LocalVarResult = Invoke-BetaApiClient -Method 'GET' `
                                -Uri $LocalVarUri `
                                -Accepts $LocalVarAccepts `
                                -ContentTypes $LocalVarContentTypes `
                                -Body $LocalVarBodyParameter `
                                -HeaderParameters $LocalVarHeaderParameters `
                                -QueryParameters $LocalVarQueryParameters `
                                -FormParameters $LocalVarFormParameters `
                                -CookieParameters $LocalVarCookieParameters `
                                -ReturnType "IdentityCertificationTask" `
                                -IsBodyNullable $false

        if ($WithHttpInfo.IsPresent) {
            return $LocalVarResult
        } else {
            return $LocalVarResult["Response"]
        }
    }
}

<#
.SYNOPSIS

List of Reviewers for the certification

.DESCRIPTION

No description available.

.PARAMETER Id
The certification ID

.PARAMETER Limit
Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information.

.PARAMETER Offset
Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information.

.PARAMETER Count
If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored. Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information.

.PARAMETER Filters
Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results) Filtering is supported for the following fields and operators (Filtering is done by reviewer's fields): **id**: *eq, in* **name**: *eq, sw* **email**: *eq, sw*

.PARAMETER Sorters
Sort results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#sorting-results) Sorting is supported for the following fields: **name, email**

.PARAMETER WithHttpInfo

A switch when turned on will return a hash table of Response, StatusCode and Headers instead of just the Response

.OUTPUTS

IdentityReferenceWithNameAndEmail[]
#>
function Get-BetaCertificationReviewers {
    [CmdletBinding()]
    Param (
        [Parameter(Position = 0, ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${Id},
        [Parameter(Position = 1, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [System.Nullable[Int32]]
        ${Limit},
        [Parameter(Position = 2, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [System.Nullable[Int32]]
        ${Offset},
        [Parameter(Position = 3, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [System.Nullable[Boolean]]
        ${Count},
        [Parameter(Position = 4, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${Filters},
        [Parameter(Position = 5, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${Sorters},
        [Switch]
        $WithHttpInfo
    )

    Process {
        'Calling method: Get-BetaCertificationReviewers' | Write-Debug
        $PSBoundParameters | Out-DebugParameter | Write-Debug

        $LocalVarAccepts = @()
        $LocalVarContentTypes = @()
        $LocalVarQueryParameters = @{}
        $LocalVarHeaderParameters = @{}
        $LocalVarFormParameters = @{}
        $LocalVarPathParameters = @{}
        $LocalVarCookieParameters = @{}
        $LocalVarBodyParameter = $null

        $Configuration = Get-BetaConfiguration
        # HTTP header 'Accept' (if needed)
        $LocalVarAccepts = @('application/json')

        $LocalVarUri = '/certifications/{id}/reviewers'
        if (!$Id) {
            throw "Error! The required parameter `Id` missing when calling listCertificationReviewers."
        }
        $LocalVarUri = $LocalVarUri.replace('{id}', [System.Web.HTTPUtility]::UrlEncode($Id))

        if ($Limit) {
            $LocalVarQueryParameters['limit'] = $Limit
        }

        if ($Offset) {
            $LocalVarQueryParameters['offset'] = $Offset
        }

        if ($Count) {
            $LocalVarQueryParameters['count'] = $Count
        }

        if ($Filters) {
            $LocalVarQueryParameters['filters'] = $Filters
        }

        if ($Sorters) {
            $LocalVarQueryParameters['sorters'] = $Sorters
        }



        $LocalVarResult = Invoke-BetaApiClient -Method 'GET' `
                                -Uri $LocalVarUri `
                                -Accepts $LocalVarAccepts `
                                -ContentTypes $LocalVarContentTypes `
                                -Body $LocalVarBodyParameter `
                                -HeaderParameters $LocalVarHeaderParameters `
                                -QueryParameters $LocalVarQueryParameters `
                                -FormParameters $LocalVarFormParameters `
                                -CookieParameters $LocalVarCookieParameters `
                                -ReturnType "IdentityReferenceWithNameAndEmail[]" `
                                -IsBodyNullable $false

        if ($WithHttpInfo.IsPresent) {
            return $LocalVarResult
        } else {
            return $LocalVarResult["Response"]
        }
    }
}

<#
.SYNOPSIS

Reassign Certifications Asynchronously

.DESCRIPTION

No description available.

.PARAMETER Id
The identity campaign certification ID

.PARAMETER ReviewReassign
No description available.

.PARAMETER WithHttpInfo

A switch when turned on will return a hash table of Response, StatusCode and Headers instead of just the Response

.OUTPUTS

IdentityCertificationTask
#>
function Invoke-BetaReassignIdentityCertsAsync {
    [CmdletBinding()]
    Param (
        [Parameter(Position = 0, ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [String]
        ${Id},
        [Parameter(Position = 1, ValueFromPipelineByPropertyName = $true, Mandatory = $false)]
        [PSCustomObject]
        ${ReviewReassign},
        [Switch]
        $WithHttpInfo
    )

    Process {
        'Calling method: Invoke-BetaReassignIdentityCertsAsync' | Write-Debug
        $PSBoundParameters | Out-DebugParameter | Write-Debug

        $LocalVarAccepts = @()
        $LocalVarContentTypes = @()
        $LocalVarQueryParameters = @{}
        $LocalVarHeaderParameters = @{}
        $LocalVarFormParameters = @{}
        $LocalVarPathParameters = @{}
        $LocalVarCookieParameters = @{}
        $LocalVarBodyParameter = $null

        $Configuration = Get-BetaConfiguration
        # HTTP header 'Accept' (if needed)
        $LocalVarAccepts = @('application/json')

        # HTTP header 'Content-Type'
        $LocalVarContentTypes = @('application/json')

        $LocalVarUri = '/certifications/{id}/reassign-async'
        if (!$Id) {
            throw "Error! The required parameter `Id` missing when calling reassignIdentityCertsAsync."
        }
        $LocalVarUri = $LocalVarUri.replace('{id}', [System.Web.HTTPUtility]::UrlEncode($Id))

        if (!$ReviewReassign) {
            throw "Error! The required parameter `ReviewReassign` missing when calling reassignIdentityCertsAsync."
        }

        $LocalVarBodyParameter = $ReviewReassign | ForEach-Object {
            # Get array of names of object properties that can be cast to boolean TRUE
            # PSObject.Properties - https://msdn.microsoft.com/en-us/library/system.management.automation.psobject.properties.aspx
            $NonEmptyProperties = $_.psobject.Properties | Where-Object {$null -ne $_.Value} | Select-Object -ExpandProperty Name
        
            # Convert object to JSON with only non-empty properties
            $_ | Select-Object -Property $NonEmptyProperties | ConvertTo-Json -Depth 100
        }



        $LocalVarResult = Invoke-BetaApiClient -Method 'POST' `
                                -Uri $LocalVarUri `
                                -Accepts $LocalVarAccepts `
                                -ContentTypes $LocalVarContentTypes `
                                -Body $LocalVarBodyParameter `
                                -HeaderParameters $LocalVarHeaderParameters `
                                -QueryParameters $LocalVarQueryParameters `
                                -FormParameters $LocalVarFormParameters `
                                -CookieParameters $LocalVarCookieParameters `
                                -ReturnType "IdentityCertificationTask" `
                                -IsBodyNullable $false

        if ($WithHttpInfo.IsPresent) {
            return $LocalVarResult
        } else {
            return $LocalVarResult["Response"]
        }
    }
}