man/cat1p/uniq.1p.txt
|
uniq(P) uniq(P)
NAME uniq - report or filter out repeated lines in a file SYNOPSIS uniq [-c|-d|-u][-f fields][-s char][input_file [out- put_file]] DESCRIPTION The uniq utility shall read an input file comparing adjacent lines, and write one copy of each input line on the output. The second and succeeding copies of repeated adjacent input lines shall not be written. Repeated lines in the input shall not be detected if they are not adjacent. OPTIONS The uniq utility shall conform to the Base Definitions volume of IEEE Std 1003.1-2001, Section 12.2, Utility Syntax Guidelines. The following options shall be supported: -c Precede each output line with a count of the num- ber of times the line occurred in the input. -d Suppress the writing of lines that are not repeated in the input. -f fields Ignore the first fields fields on each input line when doing comparisons, where fields is a posi- tive decimal integer. A field is the maximal string matched by the basic regular expression: [[:blank:]]*[^[:blank:]]* If the fields option-argument specifies more fields than appear on an input line, a null string shall be used for comparison. -s chars Ignore the first chars characters when doing com- parisons, where chars shall be a positive decimal integer. If specified in conjunction with the -f option, the first chars characters after the first fields fields shall be ignored. If the chars option-argument specifies more characters than remain on an input line, a null string shall be used for comparison. -u Suppress the writing of lines that are repeated in the input. OPERANDS The following operands shall be supported: input_file A pathname of the input file. If the input_file operand is not specified, or if the input_file is '-' , the standard input shall be used. output_file A pathname of the output file. If the output_file operand is not specified, the standard output shall be used. The results are unspecified if the file named by output_file is the file named by input_file. STDIN The standard input shall be used only if no input_file operand is specified or if input_file is '-' . See the INPUT FILES section. INPUT FILES The input file shall be a text file. ENVIRONMENT VARIABLES The following environment variables shall affect the execution of uniq: LANG Provide a default value for the internationaliza- tion variables that are unset or null. (See the Base Definitions volume of IEEE Std 1003.1-2001, Section 8.2, Internationalization Variables for the precedence of internationalization variables used to determine the values of locale cate- gories.) LC_ALL If set to a non-empty string value, override the values of all the other internationalization variables. LC_COLLATE Determine the locale for ordering rules. LC_CTYPE Determine the locale for the interpretation of sequences of bytes of text data as characters (for example, single-byte as opposed to multi- byte characters in arguments and input files) and which characters constitute a <blank> in the cur- rent locale. LC_MESSAGES Determine the locale that should be used to affect the format and contents of diagnostic mes- sages written to standard error. NLSPATH Determine the location of message catalogs for the processing of LC_MESSAGES . ASYNCHRONOUS EVENTS Default. STDOUT The standard output shall be used only if no output_file operand is specified. See the OUTPUT FILES section. STDERR The standard error shall be used only for diagnostic messages. OUTPUT FILES If the -c option is specified, the output file shall be empty or each line shall be of the form: "%d %s", <number of duplicates>, <line> otherwise, the output file shall be empty or each line shall be of the form: "%s", <line> EXTENDED DESCRIPTION None. EXIT STATUS The following exit values shall be returned: 0 The utility executed successfully. >0 An error occurred. CONSEQUENCES OF ERRORS Default. The following sections are informative. APPLICATION USAGE The sort utility can be used to cause repeated lines to be adjacent in the input file. EXAMPLES The following input file data (but flushed left) was used for a test series on uniq: #01 foo0 bar0 foo1 bar1 #02 bar0 foo1 bar1 foo1 #03 foo0 bar0 foo1 bar1 #04 #05 foo0 bar0 foo1 bar1 #06 foo0 bar0 foo1 bar1 #07 bar0 foo1 bar1 foo0 What follows is a series of test invocations of the uniq utility that use a mixture of uniq options against the input file data. These tests verify the meaning of adja- cent. The uniq utility views the input data as a sequence of strings delimited by '\n' . Accordingly, for the fieldsth member of the sequence, uniq interprets unique or repeated adjacent lines strictly relative to the fields+1th member. This first example tests the line counting option, com- paring each line of the input file data starting from the second field: uniq -c -f 1 uniq_0I.t 1 #01 foo0 bar0 foo1 bar1 1 #02 bar0 foo1 bar1 foo0 1 #03 foo0 bar0 foo1 bar1 1 #04 2 #05 foo0 bar0 foo1 bar1 1 #07 bar0 foo1 bar1 foo0 The number '2' , prefixing the fifth line of output, signifies that the uniq utility detected a pair of repeated lines. Given the input data, this can only be true when uniq is run using the -f 1 option (which shall cause uniq to ignore the first field on each input line). The second example tests the option to suppress unique lines, comparing each line of the input file data start- ing from the second field: uniq -d -f 1 uniq_0I.t #05 foo0 bar0 foo1 bar1 This test suppresses repeated lines, comparing each line of the input file data starting from the second field: uniq -u -f 1 uniq_0I.t #01 foo0 bar0 foo1 bar1 #02 bar0 foo1 bar1 foo1 #03 foo0 bar0 foo1 bar1 #04 #07 bar0 foo1 bar1 foo0 This suppresses unique lines, comparing each line of the input file data starting from the third character: uniq -d -s 2 uniq_0I.t In the last example, the uniq utility found no input matching the above criteria. RATIONALE Some historical implementations have limited lines to be 1080 bytes in length, which does not meet the implied {LINE_MAX} limit. FUTURE DIRECTIONS None. SEE ALSO comm , sort COPYRIGHT Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology -- Portable Operat- ing System Interface (POSIX), The Open Group Base Speci- fications Issue 6, Copyright (C) 2001-2003 by the Insti- tute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.open- group.org/unix/online.html . POSIX 2003 uniq(P) |