modules/deploy/dsc/ext/PsGallery/xDhcpServer.1.3.0.0/DSCResources/MSFT_xDhcpServerScope/MSFT_xDhcpServerScope.psm1
|
Import-Module $PSScriptRoot\..\Helper.psm1 -Verbose:$false # Localized messages data LocalizedData { # culture="en-US" ConvertFrom-StringData @' AddingScopeMessage = Adding DHCP server scope with the given IP address range ... CheckScopeMessage = Checking DHCP server scope with the given IP address range ... SetScopeMessage = DHCP server scope with name {0} is now present RemovingScopeMessage = Removing DHCP server scope with the given IP address range ... DeleteScopeMessage = DHCP server scope with the given IP address range is now absent TestScopeMessage = DHCP server scope with the given IP address range is {0} and it should be {1} CheckPropertyMessage = Checking DHCP server scope {0} ... NotDesiredPropertyMessage = DHCP server scope {0} is not correct. Expected {1}, actual {2} DesiredPropertyMessage = DHCP server scope {0} is correct. SetPropertyMessage = DHCP server scope {0} is set to {1}. '@ } function Get-TargetResource { [CmdletBinding()] [OutputType([System.Collections.Hashtable])] param ( [parameter(Mandatory)] [String]$Name, [parameter(Mandatory)] [String]$IPStartRange, [parameter(Mandatory)] [String]$IPEndRange, [parameter(Mandatory)] [String]$SubnetMask, [ValidateSet('IPv4')] [String]$AddressFamily = 'IPv4' ) #region Input Validation # Check for DhcpServer module/role Assert-Module -moduleName DHCPServer # Convert the Start Range to be a valid IPAddress $IPStartRange = (Get-ValidIpAddress -ipString $IPStartRange -AddressFamily $AddressFamily -parameterName 'IPStartRange').ToString() # Convert the End Range to be a valid IPAddress $IPEndRange = (Get-ValidIpAddress -ipString $IPEndRange -AddressFamily $AddressFamily -parameterName 'IPEndRange').ToString() # Convert the Subnet Mask to be a valid IPAddress $SubnetMask = (Get-ValidIpAddress -ipString $SubnetMask -AddressFamily $AddressFamily -parameterName 'SubnetMask').ToString() # Check to ensure startRange is smaller than endRange if($IPEndRange.Address -lt $IPStartRange.Address) { $errorMsg = $LocalizedData.InvalidStartAndEndRangeMessage New-TerminatingError -errorId RangeNotCorrect -errorMessage $errorMsg -errorCategory InvalidArgument } #endregion Input Validation $dhcpScope = Get-DhcpServerv4Scope | Where-Object {($_.StartRange -eq $IPStartRange) -and ($_.EndRange -eq $IPEndRange)} if($dhcpScope) { $ensure = 'Present' } else { $ensure = 'Absent' } @{ ScopeID = $dhcpScope.ScopeId Name = $dhcpScope.Name IPStartRange = $IPStartRange IPEndRange = $IPEndRange SubnetMask = $dhcpScope.SubnetMask LeaseDuration = $dhcpScope.LeaseDuration State = $dhcpScope.State AddressFamily = 'IPv4' Ensure = $Ensure } } function Set-TargetResource { [CmdletBinding()] param ( [parameter(Mandatory)] [String]$Name, [parameter(Mandatory)] [String]$IPStartRange, [parameter(Mandatory)] [String]$IPEndRange, [parameter(Mandatory)] [String]$SubnetMask, [String]$LeaseDuration, [ValidateSet('IPv4')] [String]$AddressFamily = 'IPv4', [ValidateSet('Active','Inactive')] [String]$State = 'Active', [ValidateSet('Present','Absent')] [String]$Ensure = 'Present' ) if($PSBoundParameters.ContainsKey('Debug')){ $null = $PSBoundParameters.Remove('Debug')} if($PSBoundParameters.ContainsKey('AddressFamily')) {$null = $PSBoundParameters.Remove('AddressFamily')} Validate-ResourceProperties @PSBoundParameters -Apply } function Test-TargetResource { [CmdletBinding()] [OutputType([System.Boolean])] param ( [parameter(Mandatory)] [String]$Name, [parameter(Mandatory)] [String]$IPStartRange, [parameter(Mandatory)] [String]$IPEndRange, [parameter(Mandatory)] [String]$SubnetMask, [String]$LeaseDuration, [ValidateSet('IPv4')] [String]$AddressFamily = 'IPv4', [ValidateSet('Active','Inactive')] [String]$State = 'Active', [ValidateSet('Present','Absent')] [String]$Ensure = 'Present' ) #region Input Validation # Check for DhcpServer module/role Assert-Module -moduleName DHCPServer # Convert the Start Range to be a valid IPAddress $IPStartRange = (Get-ValidIpAddress -ipString $IPStartRange -AddressFamily $AddressFamily -parameterName 'IPStartRange').ToString() # Convert the End Range to be a valid IPAddress $IPEndRange = (Get-ValidIpAddress -ipString $IPEndRange -AddressFamily $AddressFamily -parameterName 'IPEndRange').ToString() # Convert the Subnet Mask to be a valid IPAddress $SubnetMask = (Get-ValidIpAddress -ipString $SubnetMask -AddressFamily $AddressFamily -parameterName 'SubnetMask').ToString() # Check to ensure startRange is smaller than endRange if($IPEndRange.Address -lt $IPStartRange.Address) { $errorMsg = $LocalizedData.InvalidStartAndEndRangeMessage New-TerminatingError -errorId RangeNotCorrect -errorMessage $errorMsg -errorCategory InvalidArgument } # Convert the Lease duration to be a valid timespan if($LeaseDuration) { $LeaseDuration = (Get-ValidTimeSpan -tsString $LeaseDuration -parameterName 'Leaseduration').ToString() } #endregion Input Validation if($PSBoundParameters.ContainsKey('Debug')){ $null = $PSBoundParameters.Remove('Debug')} if($PSBoundParameters.ContainsKey('AddressFamily')) {$null = $PSBoundParameters.Remove('AddressFamily')} Validate-ResourceProperties @PSBoundParameters } function Validate-ResourceProperties { [CmdletBinding()] param ( [parameter(Mandatory)] [String]$Name, [parameter(Mandatory)] [String]$IPStartRange, [parameter(Mandatory)] [String]$IPEndRange, [parameter(Mandatory)] [String]$SubnetMask, [String]$LeaseDuration, [ValidateSet('Active','Inactive')] [String]$State = 'Active', [ValidateSet('Present','Absent')] [String]$Ensure = 'Present', [Switch]$Apply ) $checkScopeMessage = $LocalizedData.CheckScopeMessage Write-Verbose -Message $checkScopeMessage $dhcpScope = Get-DhcpServerv4Scope | Where-Object {($_.StartRange -eq $IPStartRange) -and ($_.EndRange -eq $IPEndRange)} # Initialize the parameter collection if($Apply) { $parameters = @{} } # dhcpScope is set if($dhcpScope) { $TestScopeMessage = $($LocalizedData.TestScopeMessage) -f 'present', $Ensure Write-Verbose -Message $TestScopeMessage # if it should be present, test individual properties to match parameter values if($Ensure -eq 'Present') { #region Test the Scope Name $checkPropertyMsg = $($LocalizedData.CheckPropertyMessage) -f 'name' Write-Verbose -Message $checkPropertyMsg if($dhcpScope.Name -ne $Name) { $notDesiredPropertyMsg = $($LocalizedData.NotDesiredPropertyMessage) -f 'name',$Name,$($dhcpScope.Name) Write-Verbose -Message $notDesiredPropertyMsg if($Apply) { $parameters['Name'] = $Name } else { return $false } } else { $desiredPropertyMsg = $($LocalizedData.DesiredPropertyMessage) -f 'name' Write-Verbose -Message $desiredPropertyMsg } #endregion scope name #region Test the Lease duration if($PSBoundParameters.ContainsKey('LeaseDuration')) { $checkPropertyMsg = $($LocalizedData.CheckPropertyMessage) -f 'lease duration' Write-Verbose -Message $checkPropertyMsg if($dhcpScope.LeaseDuration -ne $LeaseDuration) { $notDesiredPropertyMsg = $($LocalizedData.NotDesiredPropertyMessage) -f 'lease duration',$LeaseDuration,$($dhcpScope.LeaseDuration) Write-Verbose -Message $notDesiredPropertyMsg if($Apply) { $parameters['LeaseDuration'] = $LeaseDuration } else { return $false } } else { $desiredPropertyMsg = $($LocalizedData.DesiredPropertyMessage) -f 'lease duration' Write-Verbose -Message $desiredPropertyMsg } } #endregion lease duration #region Test the Scope State if($PSBoundParameters.ContainsKey('State')) { $checkPropertyMsg = $($LocalizedData.CheckPropertyMessage) -f 'state' Write-Verbose -Message $checkPropertyMsg if($dhcpScope.State -ne $State) { $notDesiredPropertyMsg = $($LocalizedData.NotDesiredPropertyMessage) -f 'state',$State,$($dhcpScope.State) Write-Verbose -Message $notDesiredPropertyMsg if($Apply) { $parameters['State'] = $State } else { return $false } } else { $desiredPropertyMsg = $($LocalizedData.DesiredPropertyMessage) -f 'state' Write-Verbose -Message $desiredPropertyMsg } } #endregion scope state #region Test the Subnet Mask $checkPropertyMsg = $($LocalizedData.CheckPropertyMessage) -f 'subnet mask' Write-Verbose -Message $checkPropertyMsg if($dhcpScope.SubnetMask -ne $SubnetMask) { $notDesiredPropertyMsg = $($LocalizedData.NotDesiredPropertyMessage) -f 'subnet mask',$SubnetMask,$($dhcpScope.SubnetMask) Write-Verbose -Message $notDesiredPropertyMsg if($Apply) { try { # To set the subnet mask scope, the only ways is to remove the old scope and add a new scope Remove-DhcpServerv4Scope -ScopeId $dhcpScope.ScopeId Add-DhcpServerv4Scope @parameters -Type Dhcp } catch { New-TerminatingError -errorId DhcpServerScopeFailure -errorMessage $_.Exception.Message -errorCategory InvalidOperation } $setPropertyMsg = $($LocalizedData.SetPropertyMessage) -f 'subnet mask',$SubnetMask Write-Verbose -Message $setPropertyMsg } else { return $false } } else { $desiredPropertyMsg = $($LocalizedData.DesiredPropertyMessage) -f 'subnet mask' Write-Verbose -Message $desiredPropertyMsg } #endregion subnet mask if($Apply) { # If parameters contains more than 0 key, set the DhcpServer scope if($parameters.Count -gt 0) { Set-DhcpServerv4Scope @parameters -ScopeId $dhcpScope.ScopeId Write-PropertyMessage -Parameters $parameters -keysToSkip ScopeId ` -Message $($LocalizedData.SetPropertyMessage) -Verbose } } # end Apply else { return $true } } # end ensure eq present # If dhcpscope should be absent else { if($Apply) { $removingScopeMsg = $LocalizedData.RemovingScopeMessage Write-Verbose -Message $removingScopeMsg # Remove the scope Remove-DhcpServerv4Scope -ScopeId $dhcpScope.ScopeId $deleteScopeMsg = $LocalizedData.deleteScopeMessage Write-Verbose -Message $deleteScopeMsg } else { return $false } }# end ensure -eq 'Absent' } # if $dhcpScope #If dhcpScope is not set, create it if needed else { $TestScopeMessage = $($LocalizedData.TestScopeMessage) -f 'absent', $Ensure Write-Verbose -Message $TestScopeMessage if($Ensure -eq 'Present') { if($Apply) { # Add mandatory parameters $parameters['Name'] = $Name $parameters['StartRange'] = $IPStartRange $parameters['EndRange'] = $IPEndRange $parameters['SubnetMask'] = $SubnetMask # Check if Lease duration is specified, add to parameter collection if($PSBoundParameters.ContainsKey('LeaseDuration')) { $parameters['LeaseDuration'] = $LeaseDuration } # Check if State is specified, add to parameter collection if($PSBoundParameters.ContainsKey('State')) { $parameters['State'] = $State } $addingScopeMessage = $LocalizedData.AddingScopeMessage Write-Verbose -Message $addingScopeMessage try { # Create a new scope with specified properties Add-DhcpServerv4Scope @parameters -Type dhcp $setScopeMessage = $($LocalizedData.SetScopeMessage) -f $Name Write-Verbose -Message $setScopeMessage } catch { New-TerminatingError -errorId DhcpServerScopeFailure -errorMessage $_.Exception.Message -errorCategory InvalidOperation } }# end Apply else { return $false } } # end Ensure -eq Present else { return $true } } # else !dhcpscope } Export-ModuleMember -Function *-TargetResource |