Public/Add-PRTGResult.ps1
|
function Add-PRTGResult { <# .SYNOPSIS Creates a new PRTG Result Type .DESCRIPTION This command creates a new PRTG result #> [CmdletBinding(DefaultParameterSetName="Unit")] param( #The name for the sensor channel [Parameter(Mandatory,ValueFromPipelineByPropertyName)][String]$Channel, #The value as integer or float. [Parameter(Mandatory,ValueFromPipelineByPropertyName)][Float]$Value, #A PRTG Result set created by New-PRTGResultSet [Parameter(ValueFromPipeline)][PSCustomObject]$PRTGResultSet, #Define if the limit settings defined above will be active. Default is false (no; limits inactive). If 0 is used the limits will be written to the sensor channel settings as predefined values, but limits will be disabled. [Parameter(ValueFromPipelineByPropertyName)][Switch]$LimitMode, #If enabled for at least one channel, the entire sensor is set to "Warning" status. Default is false (no). [Parameter(ValueFromPipelineByPropertyName)][Switch]$Warning, #Init value for the Show in Graphs option. Default is 1 (yes). The values defined with this element will be considered only on the first sensor scan, when the channel is newly created; they are ignored on all further sensor scans (and may be omitted). You can change this initial setting later in the sensor's channel settings. [Parameter(ValueFromPipelineByPropertyName)][Switch]$ShowChart, #Init value for the Show in Tables option. Default is 1 (yes). The values defined with this element will be considered only on the first sensor scan, when the channel is newly created; they are ignored on all further sensor scans (and may be omitted). You can change this initial setting later in the sensor's channel settings. [Parameter(ValueFromPipelineByPropertyName)][Switch]$ShowTable, #If a returned channel contains this tag, it will trigger a change notification that you can use with the Change Trigger to send a notification. [Parameter(ValueFromPipelineByPropertyName)][Switch]$NotifyChanged, #The name of the value lookup ID to use. Defaults to simple 1 for true and 0 for false [Parameter(ParameterSetName="ValueLookup",Mandatory,ValueFromPipelineByPropertyName)][String]$ValueLookup = "powershell.boolean", #The unit of the value. Default is Custom. This is useful for PRTG to be able to convert volumes and times. NOTE: CPU is a percentage unit that is accounted to the CPU load in index graphs. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)] [ValidateSet("Custom","BytesBandwidth","BytesDisk","Temperature","Percent","TimeResponse","TimeSeconds","Count","CPU","BytesFile","SpeedDisk","SpeedNet","TimeHours")] [String]$Unit, #If Custom is used as unit, this is the text displayed behind the value. Use Any string (keep it short) [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)][String]$CustomUnit, #Size used for the display value. For example, if you have a value of 50000 and use Kilo as size, the display is 50 kilo #. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)] [ValidateSet("One","Kilo","Mega","Giga","Tera","Byte","KiloByte","MegaByte","GigaByte","TeraByte","Bit","KiloBit","MegaBit","GigaBit","TeraBit")] [Alias("VolumeSize")] [String]$SpeedSize, #In conjunction with SpeedSize, specify a duration. For instance, if you specify "Kilobit" for SpeedSize and "Second" for this parameter, the unit will be kilobit per second [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)] [ValidateSet("Second","Minute","Hour","Day")] [String]$SpeedTime, #Select if the value is an absolute value or counter. Default is Absolute. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)] [ValidateSet("Absolute","Difference")] [String]$Mode, #Whether the value is a float or an integer. Set this to true if your result has a decimal point in it and is not a whole number [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)][Switch]$Float, #Init value for the Decimal Places option. If 0 is used in the <Float> element (use integer), the default is Auto; otherwise (for float) the default is All. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)] [ValidateSet("Auto","All")] [String]$DecimalMode, #Define an upper error limit for the channel. If enabled, the sensor will be set to a "Down" status if this value is overrun and the LimitMode is activated. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)][Int]$LimitMaxError, #Define a lower error limit for the channel. If enabled, the sensor will be set to a "Down" status if this value is undercut and the LimitMode is activated. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)][Int]$LimitMinError, #Define an additional message. It will be added to the sensor's message when entering a "Down" status that is triggered by a limit. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)][String]$LimitErrorMsg, #Define an upper warning limit for the channel. If enabled, the sensor will be set to a "Warning" status if this value is overrun and the LimitMode is activated. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)][Int]$LimitMaxWarning, #Define a lower warning limit for the channel. If enabled, the sensor will be set to a "Warning" status if this value is undercut and the LimitMode is activated. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)][Int]$LimitMinWarning, #Define an additional message. It will be added to the sensor's message when entering a "Warning" status that is triggered by a limit. [Parameter(ParameterSetName="Unit",ValueFromPipelineByPropertyName)][String]$LimitWarningMsg ) process { #Strip Common Parameters $CommonPSParameters = "Debug","ErrorAction","ErrorVariable","InformationAction","InformationVariable","OutVariable","OutBuffer","PipelineVariable","Verbose","WarningAction","WarningVariable","Whatif","Confirm" $PRTGParams = $PSCmdlet.MyInvocation.BoundParameters $PRTGParams.keys.clone() | Foreach-Object { if ($CommonPSParameters -contains $PSItem) { $PRTGParams.remove($PSItem) > $null } } #Convert Switch Parameters to Integers $PRTGParams.keys.clone() | Foreach-Object { if ($PRTGParams[$PSItem].gettype().fullname -eq 'System.Management.Automation.SwitchParameter') { $PRTGParams[$PSItem] = [int][bool]($PRTGParams[$PSItem]) } } if (-not $PRTGResultSet) {$PRTGResultSet = New-PRTGResultSet} $PRTGResultSet.prtg.result.add($PRTGParams) > $null $PRTGResultSet } } |