Public/New-NSLBVirtualServer.ps1
|
<#
Copyright 2015 Brandon Olin Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. #> function New-NSLBVirtualServer { <# .SYNOPSIS Creates a new load balancer virtual server. .DESCRIPTION Creates a new load balancer virtual server. .EXAMPLE New-NSLBVirtualServer -Name 'vserver01' -IPAddress '10.10.10.10' Create a new virtual server named 'vserver01' with an IP address of '10.10.10.10' .EXAMPLE New-NSLBVirtualServer -Name 'vserver01' -IPAddress '10.10.10.10' -Port 8080 -ServiceType 'HTTP' -LBMethod 'ROUNDROBIN' Create a new virtual server named 'vserver01' listening on port 8080 with a load balancing method of 'ROUNDROBIN'. .PARAMETER Session The NetScaler session object. .PARAMETER Name Name for the virtual server. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at sign (@), equal sign (=), and hyphen (-) characters. Can be changed after the virtual server is created. Minimum length = 1 .PARAMETER IPAddress IPv4 or IPv6 address to assign to the virtual server. .PARAMETER NonAddressable Bypasses the need for an IPAddress and port for the virtual server to configure it as "Non Addressable" .PARAMETER Comment Any comments that you might want to associate with the virtual server. .PARAMETER Port Port number for the virtual server. Range 1 - 65535 .PARAMETER ServiceType Protocol used by the service (also called the service type). Possible values = HTTP, FTP, TCP, UDP, SSL, SSL_BRIDGE, SSL_TCP, DTLS, NNTP, DNS, DHCPRA, ANY, SIP_UDP, DNS_TCP, RTSP, PUSH, SSL_PUSH, RADIUS, RDP, MYSQL, MSSQL, DIAMETER, SSL_DIAMETER, TFTP, ORACLE .PARAMETER LBMethod Load balancing method. The available settings function as follows: * ROUNDROBIN - Distribute requests in rotation, regardless of the load. Weights can be assigned to services to enforce weighted round robin distribution. * LEASTCONNECTION (default) - Select the service with the fewest connections. * LEASTRESPONSETIME - Select the service with the lowest average response time. * LEASTBANDWIDTH - Select the service currently handling the least traffic. * LEASTPACKETS - Select the service currently serving the lowest number of packets per second. * CUSTOMLOAD - Base service selection on the SNMP metrics obtained by custom load monitors. * LRTM - Select the service with the lowest response time. Response times are learned through monitoring probes. This method also takes the number of active connections into account. Also available are a number of hashing methods, in which the appliance extracts a predetermined portion of the request, creates a hash of the portion, and then checks whether any previous requests had the same hash value. If it finds a match, it forwards the request to the service that served those previous requests. Following are the hashing methods: * URLHASH - Create a hash of the request URL (or part of the URL). * DOMAINHASH - Create a hash of the domain name in the request (or part of the domain name). The domain name is taken from either the URL or the Host header. If the domain name appears in both locations, the URL is preferred. If the request does not contain a domain name, the load balancing method defaults to LEASTCONNECTION. * DESTINATIONIPHASH - Create a hash of the destination IP address in the IP header. * SOURCEIPHASH - Create a hash of the source IP address in the IP header. * TOKEN - Extract a token from the request, create a hash of the token, and then select the service to which any previous requests with the same token hash value were sent. * SRCIPDESTIPHASH - Create a hash of the string obtained by concatenating the source IP address and destination IP address in the IP header. * SRCIPSRCPORTHASH - Create a hash of the source IP address and source port in the IP header. * CALLIDHASH - Create a hash of the SIP Call-ID header. Default value: LEASTCONNECTION Possible values = ROUNDROBIN, LEASTCONNECTION, LEASTRESPONSETIME, URLHASH, DOMAINHASH, DESTINATIONIPHASH, SOURCEIPHASH, SRCIPDESTIPHASH, LEASTBANDWIDTH, LEASTPACKETS, TOKEN, SRCIPSRCPORTHASH, LRTM, CALLIDHASH, CUSTOMLOAD, LEASTREQUEST .PARAMETER PersistenceType Return the load balancer server object. Type of persistence for the virtual server. Available settings function as follows: * SOURCEIP - Connections from the same client IP address belong to the same persistence session. * COOKIEINSERT - Connections that have the same HTTP Cookie, inserted by a Set-Cookie directive from a server, belong to the same persistence session. * SSLSESSION - Connections that have the same SSL Session ID belong to the same persistence session. * CUSTOMSERVERID - Connections with the same server ID form part of the same session. For this persistence type, set the Server ID (CustomServerID) parameter for each service and configure the Rule parameter to identify the server ID in a request. * RULE - All connections that match a user defined rule belong to the same persistence session. * URLPASSIVE - Requests that have the same server ID in the URL query belong to the same persistence session. The server ID is the hexadecimal representation of the IP address and port of the service to which the request must be forwarded. This persistence type requires a rule to identify the server ID in the request. * DESTIP - Connections to the same destination IP address belong to the same persistence session. * SRCIPDESTIP - Connections that have the same source IP address and destination IP address belong to the same persistence session. * CALLID - Connections that have the same CALL-ID SIP header belong to the same persistence session. * RTSPSID - Connections that have the same RTSP Session ID belong to the same persistence session. * FIXSESSION - Connections that have the same SenderCompID and TargetCompID values belong to the same persistence session. Possible values = SOURCEIP, COOKIEINSERT, SSLSESSION, RULE, URLPASSIVE, CUSTOMSERVERID, DESTIP, SRCIPDESTIP, CALLID, RTSPSID, DIAMETER, FIXSESSION, NONE .PARAMETER RedirectFromPort Port number for the virtual server, from which we absorb the traffic for http redirect. Minimum value = 1 Range 1 - 65535 .PARAMETER HTTPSRedirectURL URL to which to redirect traffic if the traffic is recieved from redirect port. .PARAMETER ICMPVSResponse How the NetScaler appliance responds to ping requests received for an IP address that is common to one or more virtual servers. Available settings function as follows: * If set to PASSIVE on all the virtual servers that share the IP address, the appliance always responds to the ping requests. * If set to ACTIVE on all the virtual servers that share the IP address, the appliance responds to the ping requests if at least one of the virtual servers is UP. Otherwise, the appliance does not respond. * If set to ACTIVE on some virtual servers and PASSIVE on the others, the appliance responds if at least one virtual server with the ACTIVE setting is UP. Otherwise, the appliance does not respond. Note: This parameter is available at the virtual server level. A similar parameter, ICMP Response, is available at the IP address level, for IPv4 addresses of type VIP. To set that parameter, use the add ip command in the CLI or the Create IP dialog box in the GUI. Default value: PASSIVE Possible values = PASSIVE, ACTIVE .PARAMETER Timeout Time period for which a persistence session is in effect. Default value: 2 Minimum value = 0 Maximum value = 1440 .PARAMETER Passthru Return the load balancer server object. #> [cmdletbinding(SupportsShouldProcess = $true, ConfirmImpact='Low')] param( $Session = $script:session, [parameter(Mandatory, ValueFromPipeline, ValueFromPipelineByPropertyName)] [string[]]$Name = (Read-Host -Prompt 'LB virtual server name'), [Parameter(Mandatory = $true, ParameterSetName = "Addressable")] [ValidateScript({$_ -match [IPAddress]$_ })] [string]$IPAddress, [Parameter(Mandatory = $true, ParameterSetName = "NonAddressable")] [Switch]$NonAddressable, [Parameter(Mandatory = $true, ParameterSetName = "Addressable")] [ValidateRange(1, 65534)] [int]$Port = 80, [ValidateLength(0, 256)] [string]$Comment = '', [ValidateSet('DHCPRA','DIAMTER', 'DNS', 'DNS_TCP', 'DLTS', 'FTP', 'HTTP', 'MSSQL', 'MYSQL', 'NNTP', 'PUSH','RADIUS', 'RDP', 'RTSP', 'SIP_UDP', 'SSL', 'SSL_BRIDGE', 'SSL_DIAMETER', 'SSL_PUSH', 'SSL_TCP', 'TCP', 'TFTP', 'UDP')] [string]$ServiceType = 'HTTP', [ValidateSet('ROUNDROBIN', 'LEASTCONNECTION', 'LEASTRESPONSETIME', 'LEASTBANDWIDTH', 'LEASTPACKETS', 'CUSTOMLOAD', 'LRTM', 'URLHASH', 'DOMAINHASH', 'DESTINATIONIPHASH', 'SOURCEIPHASH', 'TOKEN', 'SRCIPDESTIPHASH', 'SRCIPSRCPORTHASH', 'CALLIDHASH')] [string]$LBMethod = 'ROUNDROBIN', [Parameter()] [ValidateSet('SOURCEIP', 'COOKIEINSERT', 'SSLSESSION', 'CUSTOMSERVERID', 'RULE', 'URLPASSIVE', 'DESTIP', 'SRCIPDESTIP', 'CALLID' ,'RTSPID', 'FIXSESSION', 'NONE')] [string] $PersistenceType, [Parameter()] [ValidateRange(1, 65535)] [int] $RedirectFromPort, [Parameter()] [string] $HTTPSRedirectURL, [Parameter()] [ValidateSet('PASSIVE', 'ACTIVE')] [string] $ICMPVSResponse = 'PASSIVE', [Parameter()] [int] $Timeout, [Switch]$PassThru ) begin { _AssertSessionActive } process { foreach ($item in $Name) { if ($PSCmdlet.ShouldProcess($item, 'Create Virtual Server')) { try { if ($NonAddressable) { $params = @{ name = $item comment = $comment servicetype = $ServiceType lbmethod = $LBMethod icmpvsrresponse = $ICMPVSResponse } } else { $params = @{ name = $item comment = $comment servicetype = $ServiceType ipv46 = $IPAddress port = $Port lbmethod = $LBMethod icmpvsrresponse = $ICMPVSResponse } } if ($PSBoundParameters.ContainsKey('PersistenceType')) { $params.Add('persistencetype', $PersistenceType) } if ($PSBoundParameters.ContainsKey('RedirectFromPort')) { $params.Add('redirectfromport', $RedirectFromPort) } if ($PSBoundParameters.ContainsKey('HTTPSRedirectURL')) { $params.Add('httpsredirecturl', $HTTPSRedirectURL) } if ($PSBoundParameters.ContainsKey('Timeout')) { $params.Add('timeout', $Timeout) } _InvokeNSRestApi -Session $Session -Method POST -Type lbvserver -Payload $params -Action add if ($PSBoundParameters.ContainsKey('PassThru')) { return Get-NSLBVirtualServer -Session $Session -Name $item } } catch { throw $_ } } } } } |