en-US/Microsoft.TeamsCmdlets.PowerShell.Connect.dll-Help.xml
|
<?xml version="1.0" encoding="utf-8"?>
<helpItems schema="maml" xmlns="http://msh"> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Connect-MicrosoftTeams</command:name> <command:verb>Connect</command:verb> <command:noun>MicrosoftTeams</command:noun> <maml:description> <maml:para>The Connect-MicrosoftTeams cmdlet connects an authenticated account for use with cmdlets from the MicrosoftTeams module.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>The Connect-MicrosoftTeams cmdlet connects to Microsoft Teams with an authenticated account for use with cmdlets from the MicrosoftTeams PowerShell module. After executing this cmdlet, you can disconnect from MicrosoftTeams account using Disconnect-MicrosoftTeams. Note : With versions 4.x.x or later, enablement of basic authentication is not needed anymore in commercial environments. For GCC High/DoD environments and customers that are, or have previously been enabled for Regionally Hosted Meetings in Skype for Business Online, basic authentication needs to be enabled for *-Cs cmdlets to function properly.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Connect-MicrosoftTeams</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="none"> <maml:name>AccessTokens</maml:name> <maml:description> <maml:para>Specifies access tokens for "MS Graph" and "Skype and Teams Tenant Admin API" resources. Both the tokens used should be of the same type.</maml:para> <maml:para>- Application-based authentication has been reintroduced in preview with version 4.7.1-preview. For details and supported cmdlets, see Application-based authentication in Teams PowerShell Module (/MicrosoftTeams/teams-powershell-application-authentication).</maml:para> <maml:para>- Delegated flow - The following steps must be performed by Tenant Admin in the Azure portal when using your own application. </maml:para> <maml:para> Steps to configure the AAD application. 1. Go to Azure portal and go to App Registrations. 2. Create or select the existing application. 3. Add the following permission to this Application. 4. Click API permissions. 5. Click Add a permission. 6. Click on the Microsoft MS Graph, and then select Delegated Permission. 7. Add the following permissions: "AppCatalog.ReadWrite.All", "Group.ReadWrite.All", "User.Read.All"; 8. Next, we need to add "Skype and Teams Tenant Admin API" resource permission. Click Add a permission. 9. Navigate to "APIs my organization uses" 10. Search for "Skype and Teams Tenant Admin API". 11. Add all the listed permissions. 12. Grant admin consent to both MS Graph and "Skype and Teams Tenant Admin API" name.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Prompts you for confirmation before running the cmdlet.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogFilePath</maml:name> <maml:description> <maml:para>The path where the log file for this PowerShell session is written to. Provide a value here if you need to deviate from the default PowerShell log file location.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogLevel</maml:name> <maml:description> <maml:para>Specifies the log level. The acceptable values for this parameter are:</maml:para> <maml:para>- Info</maml:para> <maml:para>- Error</maml:para> <maml:para>- Warning</maml:para> <maml:para>- None</maml:para> <maml:para></maml:para> <maml:para>The default value is Info.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LogLevel</command:parameterValue> <dev:type> <maml:name>LogLevel</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Connect-MicrosoftTeams</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>AadAccessToken (Removed from version 2.3.2-preview)</maml:name> <maml:description> <maml:para>Specifies a Azure Active Directory Graph access token. > [!WARNING] >This parameter has been removed from version 2.3.2-preview.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Prompts you for confirmation before running the cmdlet.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogFilePath</maml:name> <maml:description> <maml:para>The path where the log file for this PowerShell session is written to. Provide a value here if you need to deviate from the default PowerShell log file location.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogLevel</maml:name> <maml:description> <maml:para>Specifies the log level. The acceptable values for this parameter are:</maml:para> <maml:para>- Info</maml:para> <maml:para>- Error</maml:para> <maml:para>- Warning</maml:para> <maml:para>- None</maml:para> <maml:para></maml:para> <maml:para>The default value is Info.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LogLevel</command:parameterValue> <dev:type> <maml:name>LogLevel</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>MsAccessToken (Removed from version 2.3.2-preview)</maml:name> <maml:description> <maml:para>Specifies a Microsoft Graph access token. > [!WARNING] >This parameter has been removed from version 2.3.2-preview.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="Domain, TenantDomain"> <maml:name>TenantId</maml:name> <maml:description> <maml:para>Specifies the ID of a tenant.</maml:para> <maml:para>If you do not specify this parameter, the account is authenticated with the home tenant.</maml:para> <maml:para>You must specify the TenantId parameter to authenticate as a service principal or when using Microsoft account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Connect-MicrosoftTeams</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>AccountId</maml:name> <maml:description> <maml:para>Specifies the ID of an account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Prompts you for confirmation before running the cmdlet.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Credential</maml:name> <maml:description> <maml:para>Specifies a PSCredential object. For more information about the PSCredential object, type Get-Help Get-Credential.</maml:para> <maml:para>The PSCredential object provides the user ID and password for organizational ID credentials.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">PSCredential</command:parameterValue> <dev:type> <maml:name>PSCredential</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogFilePath</maml:name> <maml:description> <maml:para>The path where the log file for this PowerShell session is written to. Provide a value here if you need to deviate from the default PowerShell log file location.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogLevel</maml:name> <maml:description> <maml:para>Specifies the log level. The acceptable values for this parameter are:</maml:para> <maml:para>- Info</maml:para> <maml:para>- Error</maml:para> <maml:para>- Warning</maml:para> <maml:para>- None</maml:para> <maml:para></maml:para> <maml:para>The default value is Info.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LogLevel</command:parameterValue> <dev:type> <maml:name>LogLevel</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="Domain, TenantDomain"> <maml:name>TenantId</maml:name> <maml:description> <maml:para>Specifies the ID of a tenant.</maml:para> <maml:para>If you do not specify this parameter, the account is authenticated with the home tenant.</maml:para> <maml:para>You must specify the TenantId parameter to authenticate as a service principal or when using Microsoft account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TeamsEnvironmentName</maml:name> <maml:description> <maml:para>Use this setting if your organization is in one of the Teams Government Cloud environments.</maml:para> <maml:para>Specify "TeamsGCCH" if your organization is in the GCC High Environment. Specify "TeamsDOD" if your organization is in the DoD Environment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Connect-MicrosoftTeams</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ApplicationId</maml:name> <maml:description> <maml:para>Specifies the application ID of the service principal that is used in application-based authentication. </maml:para> <maml:para>This parameter has been reintroduced in preview with version 4.7.1-preview. For more information about Application-based authentication and supported cmdlets, see Application-based authentication in Teams PowerShell Module (/MicrosoftTeams/teams-powershell-application-authentication).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CertificateThumbprint</maml:name> <maml:description> <maml:para>Specifies the certificate thumbprint of a digital public key X.509 certificate of an application that has permission to perform this action.</maml:para> <maml:para>This parameter has been reintroduced in preview with version 4.7.1-preview. For more information about Application-based authentication and supported cmdlets, see Application-based authentication in Teams PowerShell Module (/MicrosoftTeams/teams-powershell-application-authentication).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Prompts you for confirmation before running the cmdlet.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogFilePath</maml:name> <maml:description> <maml:para>The path where the log file for this PowerShell session is written to. Provide a value here if you need to deviate from the default PowerShell log file location.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogLevel</maml:name> <maml:description> <maml:para>Specifies the log level. The acceptable values for this parameter are:</maml:para> <maml:para>- Info</maml:para> <maml:para>- Error</maml:para> <maml:para>- Warning</maml:para> <maml:para>- None</maml:para> <maml:para></maml:para> <maml:para>The default value is Info.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LogLevel</command:parameterValue> <dev:type> <maml:name>LogLevel</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="Domain, TenantDomain"> <maml:name>TenantId</maml:name> <maml:description> <maml:para>Specifies the ID of a tenant.</maml:para> <maml:para>If you do not specify this parameter, the account is authenticated with the home tenant.</maml:para> <maml:para>You must specify the TenantId parameter to authenticate as a service principal or when using Microsoft account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Connect-MicrosoftTeams</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Prompts you for confirmation before running the cmdlet.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogFilePath</maml:name> <maml:description> <maml:para>The path where the log file for this PowerShell session is written to. Provide a value here if you need to deviate from the default PowerShell log file location.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogLevel</maml:name> <maml:description> <maml:para>Specifies the log level. The acceptable values for this parameter are:</maml:para> <maml:para>- Info</maml:para> <maml:para>- Error</maml:para> <maml:para>- Warning</maml:para> <maml:para>- None</maml:para> <maml:para></maml:para> <maml:para>The default value is Info.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LogLevel</command:parameterValue> <dev:type> <maml:name>LogLevel</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="MSI, ManagedService"> <maml:name>Identity</maml:name> <maml:description> <maml:para>Login using managed service identity in the current environment. This is currently not supported for *-Cs cmdlets.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManagedServiceHostName</maml:name> <maml:description> <maml:para>Host name for managed service login.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManagedServicePort</maml:name> <maml:description> <maml:para>Port number for managed service login.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManagedServiceSecret</maml:name> <maml:description> <maml:para>Secret, used for some kinds of managed service login.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">SecureString</command:parameterValue> <dev:type> <maml:name>SecureString</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="none"> <maml:name>AccessTokens</maml:name> <maml:description> <maml:para>Specifies access tokens for "MS Graph" and "Skype and Teams Tenant Admin API" resources. Both the tokens used should be of the same type.</maml:para> <maml:para>- Application-based authentication has been reintroduced in preview with version 4.7.1-preview. For details and supported cmdlets, see Application-based authentication in Teams PowerShell Module (/MicrosoftTeams/teams-powershell-application-authentication).</maml:para> <maml:para>- Delegated flow - The following steps must be performed by Tenant Admin in the Azure portal when using your own application. </maml:para> <maml:para> Steps to configure the AAD application. 1. Go to Azure portal and go to App Registrations. 2. Create or select the existing application. 3. Add the following permission to this Application. 4. Click API permissions. 5. Click Add a permission. 6. Click on the Microsoft MS Graph, and then select Delegated Permission. 7. Add the following permissions: "AppCatalog.ReadWrite.All", "Group.ReadWrite.All", "User.Read.All"; 8. Next, we need to add "Skype and Teams Tenant Admin API" resource permission. Click Add a permission. 9. Navigate to "APIs my organization uses" 10. Search for "Skype and Teams Tenant Admin API". 11. Add all the listed permissions. 12. Grant admin consent to both MS Graph and "Skype and Teams Tenant Admin API" name.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>AadAccessToken (Removed from version 2.3.2-preview)</maml:name> <maml:description> <maml:para>Specifies a Azure Active Directory Graph access token. > [!WARNING] >This parameter has been removed from version 2.3.2-preview.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>AccountId</maml:name> <maml:description> <maml:para>Specifies the ID of an account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ApplicationId</maml:name> <maml:description> <maml:para>Specifies the application ID of the service principal that is used in application-based authentication. </maml:para> <maml:para>This parameter has been reintroduced in preview with version 4.7.1-preview. For more information about Application-based authentication and supported cmdlets, see Application-based authentication in Teams PowerShell Module (/MicrosoftTeams/teams-powershell-application-authentication).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CertificateThumbprint</maml:name> <maml:description> <maml:para>Specifies the certificate thumbprint of a digital public key X.509 certificate of an application that has permission to perform this action.</maml:para> <maml:para>This parameter has been reintroduced in preview with version 4.7.1-preview. For more information about Application-based authentication and supported cmdlets, see Application-based authentication in Teams PowerShell Module (/MicrosoftTeams/teams-powershell-application-authentication).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Prompts you for confirmation before running the cmdlet.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Credential</maml:name> <maml:description> <maml:para>Specifies a PSCredential object. For more information about the PSCredential object, type Get-Help Get-Credential.</maml:para> <maml:para>The PSCredential object provides the user ID and password for organizational ID credentials.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">PSCredential</command:parameterValue> <dev:type> <maml:name>PSCredential</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogFilePath</maml:name> <maml:description> <maml:para>The path where the log file for this PowerShell session is written to. Provide a value here if you need to deviate from the default PowerShell log file location.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LogLevel</maml:name> <maml:description> <maml:para>Specifies the log level. The acceptable values for this parameter are:</maml:para> <maml:para>- Info</maml:para> <maml:para>- Error</maml:para> <maml:para>- Warning</maml:para> <maml:para>- None</maml:para> <maml:para></maml:para> <maml:para>The default value is Info.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LogLevel</command:parameterValue> <dev:type> <maml:name>LogLevel</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>MsAccessToken (Removed from version 2.3.2-preview)</maml:name> <maml:description> <maml:para>Specifies a Microsoft Graph access token. > [!WARNING] >This parameter has been removed from version 2.3.2-preview.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="Domain, TenantDomain"> <maml:name>TenantId</maml:name> <maml:description> <maml:para>Specifies the ID of a tenant.</maml:para> <maml:para>If you do not specify this parameter, the account is authenticated with the home tenant.</maml:para> <maml:para>You must specify the TenantId parameter to authenticate as a service principal or when using Microsoft account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TeamsEnvironmentName</maml:name> <maml:description> <maml:para>Use this setting if your organization is in one of the Teams Government Cloud environments.</maml:para> <maml:para>Specify "TeamsGCCH" if your organization is in the GCC High Environment. Specify "TeamsDOD" if your organization is in the DoD Environment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="MSI, ManagedService"> <maml:name>Identity</maml:name> <maml:description> <maml:para>Login using managed service identity in the current environment. This is currently not supported for *-Cs cmdlets.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManagedServiceHostName</maml:name> <maml:description> <maml:para>Host name for managed service login.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManagedServicePort</maml:name> <maml:description> <maml:para>Port number for managed service login.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManagedServiceSecret</maml:name> <maml:description> <maml:para>Secret, used for some kinds of managed service login.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">SecureString</command:parameterValue> <dev:type> <maml:name>SecureString</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes /> <command:returnValues /> <maml:alertSet> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>------------- Example 1: Connect to MicrosoftTeams -------------</maml:title> <dev:code>Connect-MicrosoftTeams Account Environment Tenant TenantId ------- ----------- ------------------------------------ ------------------------------------ user@contoso.com AzureCloud xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</dev:code> <dev:remarks> <maml:para></maml:para> </dev:remarks> </command:example> <command:example> <maml:title>------------- Example 2: Connect to MicrosoftTeams -------------</maml:title> <dev:code>$credential = Get-Credential Connect-MicrosoftTeams -Credential $credential Account Environment Tenant TenantId ------- ----------- ------------------------------------ ------------------------------------ user@contoso.com AzureCloud xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</dev:code> <dev:remarks> <maml:para></maml:para> </dev:remarks> </command:example> <command:example> <maml:title>Example 3: Connect to MicrosoftTeams in a specific environment</maml:title> <dev:code>Connect-MicrosoftTeams -TeamsEnvironmentName TeamsGCCH Account Environment Tenant TenantId ------- ----------- ------------------------------------ ------------------------------------ user@contoso.com TeamsGCCH xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</dev:code> <dev:remarks> <maml:para></maml:para> </dev:remarks> </command:example> <command:example> <maml:title>Example 4: Connect to MicrosoftTeams using a certificate thumbprint</maml:title> <dev:code>Connect-MicrosoftTeams -CertificateThumbprint "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" -ApplicationId "00000000-0000-0000-0000-000000000000" -TenantId "YYYYYYYY-YYYY-YYYY-YYYY-YYYYYYYYYYYY"</dev:code> <dev:remarks> <maml:para></maml:para> </dev:remarks> </command:example> <command:example> <maml:title>Example 5: Connect to MicrosoftTeams using Application-based Access Tokens</maml:title> <dev:code>$ClientSecret = "..." $ApplicationID = "00000000-0000-0000-0000-000000000000" $TenantID = "YYYYYYYY-YYYY-YYYY-YYYY-YYYYYYYYYYYY" $graphtokenBody = @{ Grant_Type = "client_credentials" Scope = "https://graph.microsoft.com/.default" Client_Id = $ApplicationID Client_Secret = $ClientSecret } $graphToken = Invoke-RestMethod -Uri "https://login.microsoftonline.com/$TenantID/oauth2/v2.0/token" -Method POST -Body $graphtokenBody | Select-Object -ExpandProperty Access_Token $teamstokenBody = @{ Grant_Type = "client_credentials" Scope = "48ac35b8-9aa8-4d74-927d-1f4a14a0b239/.default" Client_Id = $ApplicationID Client_Secret = $ClientSecret } $teamsToken = Invoke-RestMethod -Uri "https://login.microsoftonline.com/$TenantID/oauth2/v2.0/token" -Method POST -Body $teamstokenBody | Select-Object -ExpandProperty Access_Token Connect-MicrosoftTeams -AccessTokens @("$graphToken", "$teamsToken")</dev:code> <dev:remarks> <maml:para></maml:para> </dev:remarks> </command:example> <command:example> <maml:title>Example 6: Connect to MicrosoftTeams using Access Tokens in the delegated flow</maml:title> <dev:code>$ClientID = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" $ClientSecret = "..." $ClientSecret = [Net.WebUtility]::URLEncode($ClientSecret) $TenantID = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" $Username = "user@contoso.onmicrosoft.com" $Password = "..." $Password = [Net.WebUtility]::URLEncode($Password) $URI = "https://login.microsoftonline.com/$TenantID/oauth2/v2.0/token" $Body = "client_id=$ClientID&client_secret=$ClientSecret&grant_type=password&username=$Username&password=$Password" $RequestParameters = @{ URI = $URI Method = "POST" ContentType = "application/x-www-form-urlencoded" } $GraphToken = (Invoke-RestMethod @RequestParameters -Body "$Body&scope=https://graph.microsoft.com/.default").access_token $TeamsToken = (Invoke-RestMethod @RequestParameters -Body "$Body&scope=48ac35b8-9aa8-4d74-927d-1f4a14a0b239/.default").access_token Connect-MicrosoftTeams -AccessTokens @($GraphToken, $TeamsToken) Account Environment Tenant TenantId ------- ----------- ------------------------------------ ------------------------------------ user@contoso.com AzureCloud xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</dev:code> <dev:remarks> <maml:para></maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/connect-microsoftteams</maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Disconnect-MicrosoftTeams</command:name> <command:verb>Disconnect</command:verb> <command:noun>MicrosoftTeams</command:noun> <maml:description> <maml:para></maml:para> </maml:description> </command:details> <maml:description> <maml:para></maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Disconnect-MicrosoftTeams</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Simulates what would happen if the cmdlet is run. The cmdlet is not run.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Proactively accepts any confirmation prompts.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Simulates what would happen if the cmdlet is run. The cmdlet is not run.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Proactively accepts any confirmation prompts.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes /> <command:returnValues /> <maml:alertSet> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>PS C:\> Disconnect-MicrosoftTeams</dev:code> <dev:remarks> <maml:para>Disconnects from the Microsoft Teams environment.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/disconnect-microsoftteams</maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Get-CsHybridTelephoneNumber</command:name> <command:verb>Get</command:verb> <command:noun>CsHybridTelephoneNumber</command:noun> <maml:description> <maml:para>This cmdlet displays information about one or more hybrid telephone numbers.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet displays information about one or more hybrid telephone numbers used for Audio Conferencing with Direct Routing for GCC High and DoD clouds.</maml:para> <maml:para>Returned results are sorted by telephone number in ascending order.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-CsHybridTelephoneNumber</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumber</maml:name> <maml:description> <maml:para>Filters the returned results to a specific phone number. The number should be specified without a prefixed "+". The phone number can not have "tel:" prefixed.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumber</maml:name> <maml:description> <maml:para>Filters the returned results to a specific phone number. The number should be specified without a prefixed "+". The phone number can not have "tel:" prefixed.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PowerShell module 4.5.0 or later.</maml:para> <maml:para>The cmdlet is only available in GCC High and DoD cloud instances.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Get-CsHybridTelephoneNumber -TelephoneNumber 14025551234 Id O365Region SourceType TargetType TelephoneNumber UserId -- ---------- ---------- ---------- --------------- ------ 14025551234 NOAM Hybrid 14025551234 00000000-0000-0000-0000-000000000000</dev:code> <dev:remarks> <maml:para>This example displays information about the phone number +1 (402) 555-1234.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>Get-CsHybridTelephoneNumber Id O365Region SourceType TargetType TelephoneNumber UserId -- ---------- ---------- ---------- --------------- ------ 14025551234 Hybrid 14025551234 14025551235 Hybrid 14025551235</dev:code> <dev:remarks> <maml:para>This example displays information about all hybrid telephone numbers in the tenant. Note that O365Region, TargetType, and UserId will not be populated.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/get-cshybridtelephonenumber</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-CsHybridTelephoneNumber</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsHybridTelephoneNumber</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Get-CsPhoneNumberAssignment</command:name> <command:verb>Get</command:verb> <command:noun>CsPhoneNumberAssignment</command:noun> <maml:description> <maml:para>This cmdlet displays information about one or more phone numbers.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet displays information about one or more phone numbers. You can filter the phone numbers to return by using different parameters.</maml:para> <maml:para>Returned results are sorted by TelephoneNumber in ascending order.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-CsPhoneNumberAssignment</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ActivationState</maml:name> <maml:description> <maml:para>Filters the returned results based on the number type. Supported values are Activated, AssignmentPending, AssignmentFailed, UpdatePending, and UpdateFailed.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>AssignedPstnTargetId</maml:name> <maml:description> <maml:para>Filters the returned results based on the user or resource account ID the phone number is assigned to. Supported values are UserPrincipalName, SIP address, and ObjectId.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CapabilitiesContain</maml:name> <maml:description> <maml:para>Filters the returned results based on the capabilities assigned to the phone number. You can specify one or more capabilities delimited by a comma. Supported capabilities</maml:para> <maml:para>are ConferenceAssignment, VoiceApplicationAssignment, UserAssignment, and OCMobile.</maml:para> <maml:para></maml:para> <maml:para>If you specify only one capability, you will get all phone numbers returned that have that capability assigned. If you specify a comma separated list for instance like ConferenceAssignment, VoiceApplicationAssignment you will get all phone numbers that have both capabilities assigned, but you won't get phone numbers that have only VoiceApplicationAssignment or ConferenceAssignment assigned as capability.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CivicAddressId</maml:name> <maml:description> <maml:para>Filters the returned results based on the CivicAddressId assigned to the phone number. You can get the CivicAddressId by using Get-CsOnlineLisCivicAddress (/powershell/module/skype/get-csonlineliscivicaddress).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>IsoCountryCode</maml:name> <maml:description> <maml:para>Filters the returned results based on the ISO 3166-1 Alpha-2 contry code assigned to the phone number.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LocationId</maml:name> <maml:description> <maml:para>Filters the returned results based on the LocationId assigned to the phone number. You can get the LocationId by using Get-CsOnlineLisLocation (/powershell/module/skype/get-csonlinelislocation).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>NumberType</maml:name> <maml:description> <maml:para>Filters the returned results based on the number type. Supported values are DirectRouting, CallingPlan, and OperatorConnect.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PstnAssignmentStatus</maml:name> <maml:description> <maml:para>Filters the returned results based on the assignment status. Support values are Unassigned, UserAssigned, ConferenceAssigned, VoiceApplicationAssigned, and ThirdPartyAppAssigned.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Skip</maml:name> <maml:description> <maml:para>Skips the first X returned results and the default value is 0.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Int32</command:parameterValue> <dev:type> <maml:name>System.Int32</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumber</maml:name> <maml:description> <maml:para>Filters the returned results to a specific phone number. It is optional to specify a prefixed "+". The phone number can not have "tel:" prefixed. We support Direct Routing numbers with extensions using the formats +1206555000;ext=1234 or 1206555000;ext=1234.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumberContain</maml:name> <maml:description> <maml:para>Filters the returned results based on substring match for the specified string on TelephoneNumber. To search for a number with an extension, you need to specify the digits of the extension. For supported formats see TelephoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumberGreaterThan</maml:name> <maml:description> <maml:para>Filters the returned results based on greater than match for the specified string on TelephoneNumber. Can be used together with TelephoneNumberLessThan to specify a range of phone numbers to return results for. For supported formats see TelephoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumberLessThan</maml:name> <maml:description> <maml:para>Filters the returned results based on less than match for the specified string on TelephoneNumber. Can be used together with TelephoneNumberGreaterThan to specify a range of phone numbers to return results for. For supported formats see TelephoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumberStartsWith</maml:name> <maml:description> <maml:para>Filters the returned results based on starts with string match for the specified string on TelephoneNumber. For supported formats see TelephoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Top</maml:name> <maml:description> <maml:para>Returns the first X returned results and the default value is 500.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Int32</command:parameterValue> <dev:type> <maml:name>System.Int32</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ActivationState</maml:name> <maml:description> <maml:para>Filters the returned results based on the number type. Supported values are Activated, AssignmentPending, AssignmentFailed, UpdatePending, and UpdateFailed.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>AssignedPstnTargetId</maml:name> <maml:description> <maml:para>Filters the returned results based on the user or resource account ID the phone number is assigned to. Supported values are UserPrincipalName, SIP address, and ObjectId.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CapabilitiesContain</maml:name> <maml:description> <maml:para>Filters the returned results based on the capabilities assigned to the phone number. You can specify one or more capabilities delimited by a comma. Supported capabilities</maml:para> <maml:para>are ConferenceAssignment, VoiceApplicationAssignment, UserAssignment, and OCMobile.</maml:para> <maml:para></maml:para> <maml:para>If you specify only one capability, you will get all phone numbers returned that have that capability assigned. If you specify a comma separated list for instance like ConferenceAssignment, VoiceApplicationAssignment you will get all phone numbers that have both capabilities assigned, but you won't get phone numbers that have only VoiceApplicationAssignment or ConferenceAssignment assigned as capability.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CivicAddressId</maml:name> <maml:description> <maml:para>Filters the returned results based on the CivicAddressId assigned to the phone number. You can get the CivicAddressId by using Get-CsOnlineLisCivicAddress (/powershell/module/skype/get-csonlineliscivicaddress).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>IsoCountryCode</maml:name> <maml:description> <maml:para>Filters the returned results based on the ISO 3166-1 Alpha-2 contry code assigned to the phone number.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LocationId</maml:name> <maml:description> <maml:para>Filters the returned results based on the LocationId assigned to the phone number. You can get the LocationId by using Get-CsOnlineLisLocation (/powershell/module/skype/get-csonlinelislocation).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>NumberType</maml:name> <maml:description> <maml:para>Filters the returned results based on the number type. Supported values are DirectRouting, CallingPlan, and OperatorConnect.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PstnAssignmentStatus</maml:name> <maml:description> <maml:para>Filters the returned results based on the assignment status. Support values are Unassigned, UserAssigned, ConferenceAssigned, VoiceApplicationAssigned, and ThirdPartyAppAssigned.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Skip</maml:name> <maml:description> <maml:para>Skips the first X returned results and the default value is 0.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Int32</command:parameterValue> <dev:type> <maml:name>System.Int32</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumber</maml:name> <maml:description> <maml:para>Filters the returned results to a specific phone number. It is optional to specify a prefixed "+". The phone number can not have "tel:" prefixed. We support Direct Routing numbers with extensions using the formats +1206555000;ext=1234 or 1206555000;ext=1234.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumberContain</maml:name> <maml:description> <maml:para>Filters the returned results based on substring match for the specified string on TelephoneNumber. To search for a number with an extension, you need to specify the digits of the extension. For supported formats see TelephoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumberGreaterThan</maml:name> <maml:description> <maml:para>Filters the returned results based on greater than match for the specified string on TelephoneNumber. Can be used together with TelephoneNumberLessThan to specify a range of phone numbers to return results for. For supported formats see TelephoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumberLessThan</maml:name> <maml:description> <maml:para>Filters the returned results based on less than match for the specified string on TelephoneNumber. Can be used together with TelephoneNumberGreaterThan to specify a range of phone numbers to return results for. For supported formats see TelephoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumberStartsWith</maml:name> <maml:description> <maml:para>Filters the returned results based on starts with string match for the specified string on TelephoneNumber. For supported formats see TelephoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Top</maml:name> <maml:description> <maml:para>Returns the first X returned results and the default value is 500.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Int32</command:parameterValue> <dev:type> <maml:name>System.Int32</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>ActivationState</maml:name> </dev:type> <maml:description> <maml:para>The activation state of the telephone number.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>AssignedPstnTargetId</maml:name> </dev:type> <maml:description> <maml:para>The ID of the object the phone number is assigned to.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>Capability</maml:name> </dev:type> <maml:description> <maml:para>The list of capabilities assigned to the phone number.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>City</maml:name> </dev:type> <maml:description> <maml:para>The city where the phone number is located.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>CivicAddressId</maml:name> </dev:type> <maml:description> <maml:para>The ID of the CivicAddress assigned to the phone number.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>IsoCountryCode</maml:name> </dev:type> <maml:description> <maml:para>The ISO country code assigned to the phone number.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>IsoSubDivision</maml:name> </dev:type> <maml:description> <maml:para>The subdivision within the country assigned to the phone number, for example, the state for US phone numbers.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>LocationId</maml:name> </dev:type> <maml:description> <maml:para>The ID of the Location assigned to the phone number.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>LocationUpdateSupported</maml:name> </dev:type> <maml:description> <maml:para>Boolean stating if updating of the location assigned to the phone number is allowed.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>NumberType</maml:name> </dev:type> <maml:description> <maml:para>The type of the phone number.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>PortInOrderStatus</maml:name> </dev:type> <maml:description> <maml:para>The status of any port in order covering the phone number.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>PstnAssignmentStatus</maml:name> </dev:type> <maml:description> <maml:para>The assignment status of the phone number.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>PstnPartnerId</maml:name> </dev:type> <maml:description> <maml:para>The ID of the PSTN partner providing the phone number.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>PstnPartnerName</maml:name> </dev:type> <maml:description> <maml:para>The name of the PSTN partner.</maml:para> </maml:description> </command:returnValue> <command:returnValue> <dev:type> <maml:name>TelephoneNumber</maml:name> </dev:type> <maml:description> <maml:para>The phone number. The number is always displayed with prefixed "+", even if it was not assigned using prefixed "+".</maml:para> <maml:para>The object returned is of type SkypeTelephoneNumberMgmtCmdletAcquiredTelephoneNumber.</maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PowerShell module 4.0.0 or later.</maml:para> <maml:para>The cmdlet is only available in commercial and GCC cloud instances.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Get-CsPhoneNumberAssignment -TelephoneNumber +14025551234 TelephoneNumber : +14025551234 NumberType : CallingPlan ActivationState : Activated AssignedPstnTargetId : dc13d97b-7897-494e-bc28-6b469bf7a70e Capability : {UserAssignment} City : Omaha CivicAddressId : 703b30e5-dbdd-4132-9809-4c6160a6acc7 IsoCountryCode : US IsoSubdivision : Nebraska LocationId : 407c17ae-8c41-431e-894a-38787c682f68 LocationUpdateSupported : True PortInOrderStatus : PstnAssignmentStatus : UserAssigned PstnPartnerId : 7fc2f2eb-89aa-41d7-93de-73d015d22ff0 PstnPartnerName : Microsoft</dev:code> <dev:remarks> <maml:para>This example displays information about the Microsoft Calling Plan subscriber phone number +1 (402) 555-1234. You can see that it is assigned to a user.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>Get-CsPhoneNumberAssignment -TelephoneNumber "+12065551000;ext=524" TelephoneNumber : +12065551000;ext=524 NumberType : DirectRouting ActivationState : Activated AssignedPstnTargetId : 2713551e-ed63-415d-9175-fc4ff825a0be Capability : {ConferenceAssignment, VoiceApplicationAssignment, UserAssignment} City : CivicAddressId : 00000000-0000-0000-0000-000000000000 IsoCountryCode : IsoSubdivision : LocationId : 00000000-0000-0000-0000-000000000000 LocationUpdateSupported : True PortInOrderStatus : PstnAssignmentStatus : UserAssigned PstnPartnerId : PstnPartnerName :</dev:code> <dev:remarks> <maml:para>This example displays information about the Direct Routing phone number +1 (206) 555-1000;ext=524. You can see that it is assigned to a user.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 3 --------------------------</maml:title> <dev:code>Get-CsPhoneNumberAssignment -CapabilitiesContain "VoiceApplicationAssignment,ConferenceAssignment"</dev:code> <dev:remarks> <maml:para>This example returns all phone numbers that have both the capability VoiceApplicationAssignment and the capability ConferenceAssignment assigned, but phone numbers that have only one of these capabilities assigned won't be returned.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 4 --------------------------</maml:title> <dev:code>Get-CsPhoneNumberAssignment -AssignedPstnTargetId user1@contoso.com</dev:code> <dev:remarks> <maml:para>This example returns information about the phone number assigned to user1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 5 --------------------------</maml:title> <dev:code>Get-CsPhoneNumberAssignment -AssignedPstnTargetId aa1@contoso.com</dev:code> <dev:remarks> <maml:para>This example returns information about the phone number assigned to resource account aa1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 6 --------------------------</maml:title> <dev:code>Get-CsPhoneNumberAssignment -ActivationState Activated -CapabilitiesContain VoiceApplicationAssignment -PstnAssignmentStatus Unassigned</dev:code> <dev:remarks> <maml:para>This example returns information about all activated phone numbers with the capability VoiceApplicationAssignment that are not assigned.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 7 --------------------------</maml:title> <dev:code>Get-CsPhoneNumberAssignment -TelephoneNumberContain "524"</dev:code> <dev:remarks> <maml:para>This example returns information about all phone numbers that contain the digits 524, including the phone number with extension 524 used in example 2.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/get-csphonenumberassignment</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsPhoneNumberAssignment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsPhoneNumberAssignment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Get-CsTeamsUnassignedNumberTreatment</command:name> <command:verb>Get</command:verb> <command:noun>CsTeamsUnassignedNumberTreatment</command:noun> <maml:description> <maml:para>Displays a specific or all treatments for how calls to an unassigned number range should be routed. </maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet displays a specific or all treatments for how calls to an unassigned number range should be routed.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-CsTeamsUnassignedNumberTreatment</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Filter</maml:name> <maml:description> <maml:para>Enables you to limit the returned data by filtering on the Identity attribute.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-CsTeamsUnassignedNumberTreatment</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="1" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Id of the specific treatment to show.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Filter</maml:name> <maml:description> <maml:para>Enables you to limit the returned data by filtering on the Identity attribute.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="1" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Id of the specific treatment to show.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PS module 2.5.1 or later.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Get-CsTeamsUnassignedNumberTreatment -Identity MainAA</dev:code> <dev:remarks> <maml:para>This example displays the treatment MainAA.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>Get-CsTeamsUnassignedNumberTreatment</dev:code> <dev:remarks> <maml:para>This example displays all configured treatments.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 3 --------------------------</maml:title> <dev:code>Get-CsTeamsUnassignedNumberTreatment -Filter Ann*</dev:code> <dev:remarks> <maml:para>This example displays all configured treatments with an Identity starting with Ann.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/get-csteamsunassignednumbertreatment</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Get-CsUserCallingSettings</command:name> <command:verb>Get</command:verb> <command:noun>CsUserCallingSettings</command:noun> <maml:description> <maml:para>This cmdlet will show the call forwarding, simultaneous ringing, call group and delegation settings for a user.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet shows the call forwarding, simultaneous ringing, call group and delegation settings for a user. It will also show any call groups the user is a member of and if someone else has added the user as a delegate.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-CsUserCallingSettings</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to show call forwarding, simultaneous ringing, call group and delegation settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to show call forwarding, simultaneous ringing, call group and delegation settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PowerShell module 4.0.0 or later.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Get-CsUserCallingSettings -Identity user1@contoso.com SipUri : sip:user1@contoso.com IsForwardingEnabled : True ForwardingType : Immediate ForwardingTarget : ForwardingTargetType : Voicemail IsUnansweredEnabled : False UnansweredTarget : UnansweredTargetType : Voicemail UnansweredDelay : 00:00:20 Delegates : Delegators : CallGroupOrder : InOrder CallGroupTargets : {} GroupMembershipDetails : GroupNotificationOverride :</dev:code> <dev:remarks> <maml:para>This example shows that user1@contoso.com has immediate call forwarding set (IsForwardingEnabled and ForwardingType) to route all incoming calls to voicemail (ForwardingTargetType).</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>Get-CsUserCallingSettings -Identity user2@contoso.com SipUri : sip:user2@contoso.com IsForwardingEnabled : True ForwardingType : Simultaneous ForwardingTarget : sip:user3@contoso.com ForwardingTargetType : SingleTarget IsUnansweredEnabled : True UnansweredTarget : UnansweredTargetType : Voicemail UnansweredDelay : 00:00:20 Delegates : Delegators : CallGroupOrder : InOrder CallGroupTargets : {} GroupMembershipDetails : GroupNotificationOverride :</dev:code> <dev:remarks> <maml:para>This example shows that user2@contoso.com has simultaneous ringing set (IsForwardingEnabled and ForwardingType) to user3@contoso.com (ForwardingTarget and ForwardingTargetType) and if the call has not been answered (IsUnansweredEnabled) within 20 seconds (UnansweredDelay) the call is routed to voicemail (UnansweredTargetType).</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 3 --------------------------</maml:title> <dev:code>Get-CsUserCallingSettings -Identity user4@contoso.com SipUri : sip:user4@contoso.com IsForwardingEnabled : True ForwardingType : Simultaneous ForwardingTarget : ForwardingTargetType : Group IsUnansweredEnabled : True UnansweredTarget : UnansweredTargetType : Voicemail UnansweredDelay : 00:00:20 Delegates : Delegators : CallGroupOrder : InOrder CallGroupTargets : {sip:user5@contoso.com} GroupMembershipDetails : CallGroupOwnerId:sip:user6@contoso.com GroupNotificationOverride : Mute (Get-CsUserCallingSettings -Identity user4@contoso.com).GroupMembershipDetails CallGroupOwnerId NotificationSetting ---------------- ------------------- sip:user6@contoso.com Ring</dev:code> <dev:remarks> <maml:para>This example shows that user4@contoso.com has simultaneous ringing set to his/her call group (ForwardingTargetType) and that the call group contains user5@contoso.com (CallGroupTargets). The call group is defined to ring members in the order listed in the call group (CallGroupOrder).</maml:para> <maml:para>You can also see that user4@contoso.com is a member of user6@contoso.com's call group (GroupMembershipDetails), that user6@contoso.com defined the call group with Ring notification for user4@contoso.com (NotificationSetting) and that user4@contoso.com has decided to turn off call notification for call group calls (GroupNotificationOverride).</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 4 --------------------------</maml:title> <dev:code>Get-CsUserCallingSettings -Identity user7@contoso.com SipUri : sip:opr7@contoso.com IsForwardingEnabled : True ForwardingType : Simultaneous ForwardingTarget : ForwardingTargetType : MyDelegates IsUnansweredEnabled : True UnansweredTarget : UnansweredTargetType : Voicemail UnansweredDelay : 00:00:20 Delegates : Id:sip:user8@contoso.com Delegators : CallGroupOrder : InOrder CallGroupTargets : {} GroupMembershipDetails : GroupNotificationOverride : Ring (Get-CsUserCallingSettings -Identity user7@contoso.com).Delegates Id : sip:user8@contoso.com MakeCalls : True ManageSettings : True ReceiveCalls : True</dev:code> <dev:remarks> <maml:para>This example shows that user7@contoso.com has simultaneous ringing set to his/her delegates (ForwardingTargetType). User8@contoso.com is the only delegate (Delegates) and that user has all the permissions you can have as a delegate (Delegates).</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 5 --------------------------</maml:title> <dev:code>Get-CsUserCallingSettings -Identity user9@contoso.com SipUri : sip:user9@contoso.com IsForwardingEnabled : False ForwardingType : Immediate ForwardingTarget : ForwardingTargetType : Voicemail IsUnansweredEnabled : True UnansweredTarget : UnansweredTargetType : Voicemail UnansweredDelay : 00:00:20 Delegates : Delegators : Id:sip:user10@contoso.com CallGroupOrder : InOrder CallGroupTargets : {} GroupMembershipDetails : GroupNotificationOverride : Ring (Get-CsUserCallingSettings -Identity user9@contoso.com).Delegators Id : sip:user10@contoso.com MakeCalls : True ManageSettings : True ReceiveCalls : True</dev:code> <dev:remarks> <maml:para>This example shows that user9@contoso.com is a delegate of user10@contoso.com (Delegators) and that user10@contoso.com has given user9@contoso.com all the permissions you can have as a delegate (Delegators).</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 6 --------------------------</maml:title> <dev:code>Get-CsUserCallingSettings -Identity user11@contoso.com SipUri : sip:user11@contoso.com IsForwardingEnabled : ForwardingType : ForwardingTarget : ForwardingTargetType : IsUnansweredEnabled : UnansweredTarget : UnansweredTargetType : UnansweredDelay : 00:00:20 Delegates : Delegators : CallGroupOrder : Simultaneous CallGroupTargets : {} GroupMembershipDetails : GroupNotificationOverride :</dev:code> <dev:remarks> <maml:para>This example shows the default settings for a user that has never changed the call forward settings via Microsoft Teams. Note that for users with settings as shown here, unanswered calls will by default be forwarded to voicemail after 30 seconds.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/get-csusercallingsettings</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsUserCallingSettings</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>New-CsHybridTelephoneNumber</command:name> <command:verb>New</command:verb> <command:noun>CsHybridTelephoneNumber</command:noun> <maml:description> <maml:para>This cmdlet adds a hybrid telephone number to the tenant.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet adds a hybrid telephone number to the tenant that can be used for Audio Conferencing with Direct Routing for GCC High and DoD clouds.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>New-CsHybridTelephoneNumber</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumber</maml:name> <maml:description> <maml:para>The telephone number to add. The number should be specified with a prefixed "+". The phone number can not have "tel:" prefixed.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Force</maml:name> <maml:description> <maml:para>Suppresses the display of any non-fatal error message that might arise when running the command.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumber</maml:name> <maml:description> <maml:para>The telephone number to add. The number should be specified with a prefixed "+". The phone number can not have "tel:" prefixed.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Force</maml:name> <maml:description> <maml:para>Suppresses the display of any non-fatal error message that might arise when running the command.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is only available in GCC High and DoD cloud instances.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>New-CsHybridTelephoneNumber -TelephoneNumber +14025551234</dev:code> <dev:remarks> <maml:para>This example adds the hybrid phone number +1 (402) 555-1234.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/new-cshybridtelephonenumber</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsHybridTelephoneNumber</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsHybridTelephoneNumber</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>New-CsTeamsUnassignedNumberTreatment</command:name> <command:verb>New</command:verb> <command:noun>CsTeamsUnassignedNumberTreatment</command:noun> <maml:description> <maml:para>Creates a new treatment for how calls to an unassigned number range should be routed. The call can be routed to a user, an application or to an announcement service where a custom message will be played to the caller. </maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet creates a treatment for how calls to an unassigned number range should be routed.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>New-CsTeamsUnassignedNumberTreatment</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Description</maml:name> <maml:description> <maml:para>Free format description of this treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Id of the treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Pattern</maml:name> <maml:description> <maml:para>A regular expression that the called number must match in order for the treatment to take effect. It is best pratice to start the regular expression with the hat character and end it with the dollar character. You can use various regular expression test sites on the Internet to validate the expression.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Target</maml:name> <maml:description> <maml:para>The identity of the destination the call should be routed to. Depending on the TargetType it should either be the ObjectId of the user or application instance/resource account or the AudioFileId of the uploaded audio file.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Guid</command:parameterValue> <dev:type> <maml:name>System.Guid</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TargetType</maml:name> <maml:description> <maml:para>The type of target used for the treatment. Allowed values are User, ResourceAccount and Announcement.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TreatmentPriority</maml:name> <maml:description> <maml:para>The priority of the treatment. Used to distinguish identical patterns. The lower the priority the higher preference. The priority needs to be unique.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Integer</command:parameterValue> <dev:type> <maml:name>System.Integer</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>New-CsTeamsUnassignedNumberTreatment</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Description</maml:name> <maml:description> <maml:para>Free format description of this treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Pattern</maml:name> <maml:description> <maml:para>A regular expression that the called number must match in order for the treatment to take effect. It is best pratice to start the regular expression with the hat character and end it with the dollar character. You can use various regular expression test sites on the Internet to validate the expression.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Target</maml:name> <maml:description> <maml:para>The identity of the destination the call should be routed to. Depending on the TargetType it should either be the ObjectId of the user or application instance/resource account or the AudioFileId of the uploaded audio file.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Guid</command:parameterValue> <dev:type> <maml:name>System.Guid</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TargetType</maml:name> <maml:description> <maml:para>The type of target used for the treatment. Allowed values are User, ResourceAccount and Announcement.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TreatmentId</maml:name> <maml:description> <maml:para>The identity of the treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TreatmentPriority</maml:name> <maml:description> <maml:para>The priority of the treatment. Used to distinguish identical patterns. The lower the priority the higher preference. The priority needs to be unique.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Integer</command:parameterValue> <dev:type> <maml:name>System.Integer</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Description</maml:name> <maml:description> <maml:para>Free format description of this treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Id of the treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Pattern</maml:name> <maml:description> <maml:para>A regular expression that the called number must match in order for the treatment to take effect. It is best pratice to start the regular expression with the hat character and end it with the dollar character. You can use various regular expression test sites on the Internet to validate the expression.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Target</maml:name> <maml:description> <maml:para>The identity of the destination the call should be routed to. Depending on the TargetType it should either be the ObjectId of the user or application instance/resource account or the AudioFileId of the uploaded audio file.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Guid</command:parameterValue> <dev:type> <maml:name>System.Guid</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TargetType</maml:name> <maml:description> <maml:para>The type of target used for the treatment. Allowed values are User, ResourceAccount and Announcement.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TreatmentId</maml:name> <maml:description> <maml:para>The identity of the treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TreatmentPriority</maml:name> <maml:description> <maml:para>The priority of the treatment. Used to distinguish identical patterns. The lower the priority the higher preference. The priority needs to be unique.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Integer</command:parameterValue> <dev:type> <maml:name>System.Integer</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PS module 2.5.1 or later.</maml:para> <maml:para>The parameters Identity and TreatmentId are mutually exclusive.</maml:para> <maml:para>To route calls to unassigned Microsoft Calling Plan subscriber numbers, your tenant needs to have available Communications Credits.</maml:para> <maml:para>To route calls to unassigned Microsoft Calling Plan service numbers, your tenant needs to have at least one Microsoft Teams Phone Resource Account license.</maml:para> <maml:para>Both inbound calls to Microsoft Teams and outbound calls from Microsoft Teams will have the called number checked against the unassigned number range.</maml:para> <maml:para>If a specified pattern/range contains phone numbers that are assigned to a user or resource account in the tenant, calls to these phone numbers will be routed to the appropriate target and not routed to the specified unassigned number treatment. There are no other checks of the numbers in the range. If the range contains a valid external phone number, outbound calls from Microsoft Teams to that phone number will be routed according to the treatment.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>$RAObjectId = (Get-CsOnlineApplicationInstance -Identity aa@contoso.com).ObjectId New-CsTeamsUnassignedNumberTreatment -Identity MainAA -Pattern "^\+15552223333$" -TargetType ResourceAccount -Target $RAObjectId -TreatmentPriority 1</dev:code> <dev:remarks> <maml:para>This example creates a treatment that will route all calls to the number +1 (555) 222-3333 to the resource account aa@contoso.com. That resource account is associated with an Auto Attendant (not part of the example).</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>$Content = Get-Content "C:\Media\MainAnnoucement.wav" -Encoding byte -ReadCount 0 $AudioFile = Import-CsOnlineAudioFile -FileName "MainAnnouncement.wav" -Content $Content $Fid=[System.Guid]::Parse($audioFile.Id) New-CsTeamsUnassignedNumberTreatment -Identity TR1 -Pattern "^\+1555333\d{4}$" -TargetType Announcement -Target $Fid.Guid -TreatmentPriority 2</dev:code> <dev:remarks> <maml:para>This example creates a treatment that will route all calls to unassigned numbers in the range +1 (555) 333-0000 to +1 (555) 333-9999 to the announcement service, where the audio file MainAnnouncement.wav will be played to the caller.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 3 --------------------------</maml:title> <dev:code>$UserObjectId = (Get-CsOnlineUser -Identity user@contoso.com).Identity New-CsTeamsUnassignedNumberTreatment -Identity TR2 -Pattern "^\+15552224444$" -TargetType User -Target $UserObjectId -TreatmentPriority 3</dev:code> <dev:remarks> <maml:para>This example creates a treatment that will route all calls to the number +1 (555) 222-4444 to the user user@contoso.com.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/new-csteamsunassignednumbertreatment</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Import-CsOnlineAudioFile</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/skype/import-csonlineaudiofile</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Test-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>New-CsUserCallingDelegate</command:name> <command:verb>New</command:verb> <command:noun>CsUserCallingDelegate</command:noun> <maml:description> <maml:para>This cmdlet will add a new delegate for calling in Microsoft Teams.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet adds a new delegate with given permissions for the specified user.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>New-CsUserCallingDelegate</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Delegate</maml:name> <maml:description> <maml:para>The Identity of the delegate to add. Can be specified using the ObjectId or the SIP address.</maml:para> <maml:para>A user can have up to 25 delegates.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to add a delegate for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>MakeCalls</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to make calls on behalf of the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManageSettings</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to change the delegate and calling settings for the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ReceiveCalls</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to receive calls on behalf of the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Delegate</maml:name> <maml:description> <maml:para>The Identity of the delegate to add. Can be specified using the ObjectId or the SIP address.</maml:para> <maml:para>A user can have up to 25 delegates.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to add a delegate for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>MakeCalls</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to make calls on behalf of the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManageSettings</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to change the delegate and calling settings for the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ReceiveCalls</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to receive calls on behalf of the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PowerShell module 4.0.0 or later.</maml:para> <maml:para>The specified user need to have the Microsoft Phone System license assigned.</maml:para> <maml:para>You can see the delegate of a user by using the Get-CsUserCallingSettings cmdlet.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>New-CsUserCallingDelegate -Identity user1@contoso.com -Delegate user2@contoso.com -MakeCalls $true -ReceiveCalls $true -ManageSettings $true</dev:code> <dev:remarks> <maml:para></maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/new-csusercallingdelegate</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsUserCallingSettings</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Remove-CsHybridTelephoneNumber</command:name> <command:verb>Remove</command:verb> <command:noun>CsHybridTelephoneNumber</command:noun> <maml:description> <maml:para>This cmdlet removes a hybrid telephone number.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet removes a hybrid telephone number used for Audio Conferencing with Direct Routing for GCC High and DoD clouds.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Remove-CsHybridTelephoneNumber</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumber</maml:name> <maml:description> <maml:para>The telephone number to remove. The number should be specified without a prefixed "+". The phone number can not have "tel:" prefixed.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Force</maml:name> <maml:description> <maml:para>Suppresses the display of any non-fatal error message that might arise when running the command.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Prompts you for confirmation before running the cmdlet.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TelephoneNumber</maml:name> <maml:description> <maml:para>The telephone number to remove. The number should be specified without a prefixed "+". The phone number can not have "tel:" prefixed.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Force</maml:name> <maml:description> <maml:para>Suppresses the display of any non-fatal error message that might arise when running the command.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="wi"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="cf"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>Prompts you for confirmation before running the cmdlet.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is only available in GCC High and DoD cloud instances.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Remove-CsHybridTelephoneNumber -TelephoneNumber 14025551234</dev:code> <dev:remarks> <maml:para>This example removes the hybrid phone number +1 (402) 555-1234.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/remove-cshybridtelephonenumber</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-CsHybridTelephoneNumber</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsHybridTelephoneNumber</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Remove-CsPhoneNumberAssignment</command:name> <command:verb>Remove</command:verb> <command:noun>CsPhoneNumberAssignment</command:noun> <maml:description> <maml:para>This cmdlet will remove/unassign a phone number from a user or a resource account (online application instance). </maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet removes/unassigns a phone number from a user or resource account. The phone number continues to be available in the tenant.</maml:para> <maml:para>Unassigning a phone number from a user or resource account will automatically set EnterpriseVoiceEnabled to False.</maml:para> <maml:para>If the cmdlet executes successfully, no result object will be returned. If the cmdlet fails for any reason, a result object will be returned that contains a Code string parameter and a Message string parameter with additional details of the failure. Note : In Teams PowerShell Module 4.2.1-preview and later we are changing how the cmdlet reports errors. Instead of using a result object, we will be generating an exception in case of an error and we will be appending the exception to the $Error automatic variable. The cmdlet will also now support the -ErrorAction parameter to control the execution after an error has occured.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Remove-CsPhoneNumberAssignment</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the specific user or resource account. Can be specified using the value in the ObjectId, the SipProxyAddress, or the UserPrincipalName attribute of the user or resource account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PhoneNumber</maml:name> <maml:description> <maml:para>The phone number to unassign from the user or resource account. Supports E.164 format and non-E.164 format. Needs to be without the prefixed "tel:".</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PhoneNumberType</maml:name> <maml:description> <maml:para>The type of phone number to unassign from the user or resource account. The supported values are DirectRouting, CallingPlan and OperatorConnect.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Remove-CsPhoneNumberAssignment</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the specific user or resource account. Can be specified using the value in the ObjectId, the SipProxyAddress, or the UserPrincipalName attribute of the user or resource account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>RemoveAll</maml:name> <maml:description> <maml:para>Unassigns the phone number from the user or resource account.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the specific user or resource account. Can be specified using the value in the ObjectId, the SipProxyAddress, or the UserPrincipalName attribute of the user or resource account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PhoneNumber</maml:name> <maml:description> <maml:para>The phone number to unassign from the user or resource account. Supports E.164 format and non-E.164 format. Needs to be without the prefixed "tel:".</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PhoneNumberType</maml:name> <maml:description> <maml:para>The type of phone number to unassign from the user or resource account. The supported values are DirectRouting, CallingPlan and OperatorConnect.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>RemoveAll</maml:name> <maml:description> <maml:para>Unassigns the phone number from the user or resource account.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PowerShell module 3.0.0 or later.</maml:para> <maml:para>The cmdlet is only available in commercial and GCC cloud instances.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Remove-CsPhoneNumberAssignment -Identity user1@contoso.com -PhoneNumber +12065551234 -PhoneNumberType CallingPlan</dev:code> <dev:remarks> <maml:para>This example removes/unassigns the Microsoft Calling Plan phone number +1 (206) 555-1234 from the user user1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>Remove-CsPhoneNumberAssignment -Identity user2@contoso.com -RemoveAll</dev:code> <dev:remarks> <maml:para>This example removes/unassigns the phone number from user2@contoso.com.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/remove-csphonenumberassignment</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsPhoneNumberAssignment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsPhoneNumberAssignment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Remove-CsTeamsUnassignedNumberTreatment</command:name> <command:verb>Remove</command:verb> <command:noun>CsTeamsUnassignedNumberTreatment</command:noun> <maml:description> <maml:para>Removes a treatment for how calls to an unassigned number range should be routed.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet removes a treatment for how calls to an unassigned number range should be routed.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Remove-CsTeamsUnassignedNumberTreatment</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="ByPropertyName" position="1" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Id of the specific treatment to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="ByPropertyName" position="1" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Id of the specific treatment to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PS module 2.5.1 or later.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Remove-CsTeamsUnassignedNumberTreatment -Identity MainAA</dev:code> <dev:remarks> <maml:para>This example removes the treatment MainAA.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/remove-csteamsunassignednumbertreatment</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Test-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Remove-CsUserCallingDelegate</command:name> <command:verb>Remove</command:verb> <command:noun>CsUserCallingDelegate</command:noun> <maml:description> <maml:para>This cmdlet will remove a delegate for calling in Microsoft Teams.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet will remove a delegate for the specified user.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Remove-CsUserCallingDelegate</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Delegate</maml:name> <maml:description> <maml:para>The Identity of the delegate to remove. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to remove a delegate for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Delegate</maml:name> <maml:description> <maml:para>The Identity of the delegate to remove. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to remove a delegate for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PowerShell module 4.0.0 or later.</maml:para> <maml:para>The specified user need to have the Microsoft Phone System license assigned.</maml:para> <maml:para>You can see the delegate of a user by using the Get-CsUserCallingSettings cmdlet.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Remove-CsUserCallingDelegate -Identity user1@contoso.com -Delegate user2@contoso.com</dev:code> <dev:remarks> <maml:para>This example shows removing the delegate user2@contoso.com.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/remove-csusercallingdelegate</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsUserCallingSettings</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Set-CsPhoneNumberAssignment</command:name> <command:verb>Set</command:verb> <command:noun>CsPhoneNumberAssignment</command:noun> <maml:description> <maml:para>This cmdlet will assign a phone number to a user or a resource account (online application instance).</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet assigns a phone number to a user or resource account. When you assign a phone number the EnterpriseVoiceEnabled flag is automatically set to True.</maml:para> <maml:para>To remove a phone number from a user or resource account, use the Remove-CsPhoneNumberAssignment (Remove-CsPhoneNumberAssignment.md)cmdlet.</maml:para> <maml:para>If the cmdlet executes successfully, no result object will be returned. If the cmdlet fails for any reason, a result object will be returned that contains a Code string parameter and a Message string parameter with additional details of the failure. Note : In Teams PowerShell Module 4.2.1-preview and later we are changing how the cmdlet reports errors. Instead of using a result object, we will be generating an exception in case of an error and we will be appending the exception to the $Error automatic variable. The cmdlet will also now support the -ErrorAction parameter to control the execution after an error has occurred. Note : Macau region is currently not supported for phone number assignment or Enterprise Voice.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-CsPhoneNumberAssignment</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>EnterpriseVoiceEnabled</maml:name> <maml:description> <maml:para>Flag indicating if the user or resource account should be EnterpriseVoiceEnabled.</maml:para> <maml:para>This parameter is mutual exclusive with PhoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the specific user or resource account. Can be specified using the value in the ObjectId, the SipProxyAddress, or the UserPrincipalName attribute of the user or resource account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-CsPhoneNumberAssignment</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the specific user or resource account. Can be specified using the value in the ObjectId, the SipProxyAddress, or the UserPrincipalName attribute of the user or resource account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LocationId</maml:name> <maml:description> <maml:para>The LocationId of the location to assign to the specific user. You can get it using Get-CsOnlineLisLocation. </maml:para> <maml:para>Removal of location from a phone number is supported for Direct Routing numbers and Operator Connect numbers that are not managed by the Service Desk. If you want to remove the location, use the string value null for LocationId.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PhoneNumber</maml:name> <maml:description> <maml:para>The phone number to assign to the user or resource account. Supports E.164 format like +12065551234 and non-E.164 format like 12065551234. The phone number can not have "tel:" prefixed.</maml:para> <maml:para>We support Direct Routing numbers with extensions using the formats +1206555000;ext=1234 or 1206555000;ext=1234 assigned to a user, but such phone numbers are not supported to be assigned to a resource account.</maml:para> <maml:para>Setting a phone number will automatically set EnterpriseVoiceEnabled to True.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PhoneNumberType</maml:name> <maml:description> <maml:para>The type of phone number to assign to the user or resource account. The supported values are DirectRouting, CallingPlan, and OperatorConnect. When you acquire a phone number you will typically know which type it is.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>EnterpriseVoiceEnabled</maml:name> <maml:description> <maml:para>Flag indicating if the user or resource account should be EnterpriseVoiceEnabled.</maml:para> <maml:para>This parameter is mutual exclusive with PhoneNumber.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the specific user or resource account. Can be specified using the value in the ObjectId, the SipProxyAddress, or the UserPrincipalName attribute of the user or resource account.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>LocationId</maml:name> <maml:description> <maml:para>The LocationId of the location to assign to the specific user. You can get it using Get-CsOnlineLisLocation. </maml:para> <maml:para>Removal of location from a phone number is supported for Direct Routing numbers and Operator Connect numbers that are not managed by the Service Desk. If you want to remove the location, use the string value null for LocationId.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PhoneNumber</maml:name> <maml:description> <maml:para>The phone number to assign to the user or resource account. Supports E.164 format like +12065551234 and non-E.164 format like 12065551234. The phone number can not have "tel:" prefixed.</maml:para> <maml:para>We support Direct Routing numbers with extensions using the formats +1206555000;ext=1234 or 1206555000;ext=1234 assigned to a user, but such phone numbers are not supported to be assigned to a resource account.</maml:para> <maml:para>Setting a phone number will automatically set EnterpriseVoiceEnabled to True.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>PhoneNumberType</maml:name> <maml:description> <maml:para>The type of phone number to assign to the user or resource account. The supported values are DirectRouting, CallingPlan, and OperatorConnect. When you acquire a phone number you will typically know which type it is.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PowerShell module 3.0.0 or later.</maml:para> <maml:para>The cmdlet is only available in commercial and GCC cloud instances.</maml:para> <maml:para>If a user or resource account has a phone number set in Active Directory on-premises and synched into Microsoft 365, you can't use Set-CsPhoneNumberAssignment to set the phone number. You will have to clear the phone number from the on-premises Active Directory and let that change sync into Microsoft 365 first.</maml:para> <maml:para>The previous command for assigning phone numbers to users Set-CsUser had the parameter HostedVoiceMail. Setting HostedVoiceMail for Microsoft Teams users is no longer necessary and that is why the parameter is not available on Set-CsPhoneNumberAssignment.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Set-CsPhoneNumberAssignment -Identity user1@contoso.com -PhoneNumber +12065551234 -PhoneNumberType CallingPlan</dev:code> <dev:remarks> <maml:para>This example assigns the Microsoft Calling Plan phone number +1 (206) 555-1234 to the user user1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>$loc=Get-CsOnlineLisLocation -City Vancouver Set-CsPhoneNumberAssignment -Identity user2@contoso.com -PhoneNumber +12065551224 -PhoneNumberType CallingPlan -LocationId $loc.LocationId</dev:code> <dev:remarks> <maml:para>This example finds the emergency location defined for the corporate location Vancouver and assigns the Microsoft Calling Plan phone number +1 (206) 555-1224 and location to the user user2@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 3 --------------------------</maml:title> <dev:code>Set-CsPhoneNumberAssignment -Identity user3@contoso.com -EnterpriseVoiceEnabled $true</dev:code> <dev:remarks> <maml:para>This example sets the EnterpriseVoiceEnabled flag on the user user3@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 4 --------------------------</maml:title> <dev:code>Set-CsPhoneNumberAssignment -Identity user3@contoso.com -LocationId 'null' -PhoneNumber +12065551226 -PhoneNumberType OperatorConnect</dev:code> <dev:remarks> <maml:para>This example removes the emergency location from the phone number for user user3@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 5 --------------------------</maml:title> <dev:code>Set-CsPhoneNumberAssignment -Identity cq1@contoso.com -PhoneNumber +14255551225 -PhoneNumberType DirectRouting</dev:code> <dev:remarks> <maml:para>This example assigns the Direct Routing phone number +1 (425) 555-1225 to the resource account cq1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 6 --------------------------</maml:title> <dev:code>Set-CsPhoneNumberAssignment -Identity user4@contoso.com -PhoneNumber "+14255551000;ext=100" -PhoneNumberType DirectRouting</dev:code> <dev:remarks> <maml:para>This example assigns the Direct Routing phone number +1 (425) 555-1000;ext=100 to the user user4@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 7 --------------------------</maml:title> <dev:code>$pn=Set-CsPhoneNumberAssignment -Identity user5@contoso.com -PhoneNumber "+14255551000;ext=100" -PhoneNumberType DirectRouting $pn Code Message ---- ------- BadRequest Telephone Number '+14255551000;ext=100' has already been assigned to another user</dev:code> <dev:remarks> <maml:para>In this example the assignment cmdlet fails, because the phone number "+14255551000;ext=100" has already been assigned to another user.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/set-csphonenumberassignment</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsPhoneNumberAssignment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsPhoneNumberAssignment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Set-CsTeamsUnassignedNumberTreatment</command:name> <command:verb>Set</command:verb> <command:noun>CsTeamsUnassignedNumberTreatment</command:noun> <maml:description> <maml:para>Changes a treatment for how calls to an unassigned number range should be routed. The call can be routed to a user, an application or to an announcement service where a custom message will be played to the caller. </maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet changes a treatment for how calls to an unassigned number range should be routed.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-CsTeamsUnassignedNumberTreatment</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="1" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Id of the specific treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Description</maml:name> <maml:description> <maml:para>Free format description of this treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Pattern</maml:name> <maml:description> <maml:para>A regular expression that the called number must match in order for the treatment to take effect. It is best pratice to start the regular expression with the hat character and end it with the dollar character. You can use various regular expression test sites on the Internet to validate the expression.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Target</maml:name> <maml:description> <maml:para>The identity of the destination the call should be routed to. Depending on the TargetType it should either be the ObjectId of the user or application instance/resource account or the AudioFileId of the uploaded audio file.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Guid</command:parameterValue> <dev:type> <maml:name>System.Guid</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TargetType</maml:name> <maml:description> <maml:para>The type of target used for the treatment. Allowed values are User, ResourceAccount and Announcement.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TreatmentPriority</maml:name> <maml:description> <maml:para>The priority of the treatment. Used to distinguish identical patterns. The lower the priority the higher preference. The priority needs to be unique.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Integer</command:parameterValue> <dev:type> <maml:name>System.Integer</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Description</maml:name> <maml:description> <maml:para>Free format description of this treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="1" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Id of the specific treatment.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Pattern</maml:name> <maml:description> <maml:para>A regular expression that the called number must match in order for the treatment to take effect. It is best pratice to start the regular expression with the hat character and end it with the dollar character. You can use various regular expression test sites on the Internet to validate the expression.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Target</maml:name> <maml:description> <maml:para>The identity of the destination the call should be routed to. Depending on the TargetType it should either be the ObjectId of the user or application instance/resource account or the AudioFileId of the uploaded audio file.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Guid</command:parameterValue> <dev:type> <maml:name>System.Guid</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TargetType</maml:name> <maml:description> <maml:para>The type of target used for the treatment. Allowed values are User, ResourceAccount and Announcement.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>TreatmentPriority</maml:name> <maml:description> <maml:para>The priority of the treatment. Used to distinguish identical patterns. The lower the priority the higher preference. The priority needs to be unique.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Integer</command:parameterValue> <dev:type> <maml:name>System.Integer</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PS module 2.5.1 or later.</maml:para> <maml:para>Both inbound calls to Microsoft Teams and outbound calls from Microsoft Teams will have the called number checked against the unassigned number range.</maml:para> <maml:para>To route calls to unassigned Microsoft Calling Plan subscriber numbers, your tenant needs to have available Communications Credits.</maml:para> <maml:para>To route calls to unassigned Microsoft Calling Plan service numbers, your tenant needs to have at least one Microsoft Teams Phone Resource Account license.</maml:para> <maml:para>If a specified pattern/range contains phone numbers that are assigned to a user or resource account in the tenant, calls to these phone numbers will be routed to the appropriate target and not routed to the specified unassigned number treatment. There are no other checks of the numbers in the range. If the range contains a valid external phone number, outbound calls from Microsoft Teams to that phone number will be routed according to the treatment.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>$RAObjectId = (Get-CsOnlineApplicationInstance -Identity aa2@contoso.com).ObjectId Set-CsTeamsUnassignedNumberTreatment -Identity MainAA -Target $RAObjectId</dev:code> <dev:remarks> <maml:para>This example changes the treatment MainAA to route the calls to the resource account aa2@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>$UserObjectId = (Get-CsOnlineUser -Identity user2@contoso.com).Identity Set-CsTeamsUnassignedNumberTreatment -Identity User2PSTN -TargetType User -Target $UserObjectId</dev:code> <dev:remarks> <maml:para>This example changes the treatment User2PSTN to route the calls to the user user2@contoso.com.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/set-csteamsunassignednumbertreatment</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Import-CsOnlineAudioFile</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/skype/import-csonlineaudiofile</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Test-CsTeamsUnassignedNumberTreatment</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Set-CsUserCallingDelegate</command:name> <command:verb>Set</command:verb> <command:noun>CsUserCallingDelegate</command:noun> <maml:description> <maml:para>This cmdlet will change permissions for a delegate for calling in Microsoft Teams.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet can change the permissions assigned to a delegate for the specified user.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-CsUserCallingDelegate</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Delegate</maml:name> <maml:description> <maml:para>The Identity of the delegate to add. Can be specified using the ObjectId or the SIP address.</maml:para> <maml:para>A user can have up to 25 delegates.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to add a delegate for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>MakeCalls</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to make calls on behalf of the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManageSettings</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to change the delegate and calling settings for the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ReceiveCalls</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to receive calls on behalf of the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Delegate</maml:name> <maml:description> <maml:para>The Identity of the delegate to add. Can be specified using the ObjectId or the SIP address.</maml:para> <maml:para>A user can have up to 25 delegates.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to add a delegate for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>MakeCalls</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to make calls on behalf of the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ManageSettings</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to change the delegate and calling settings for the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ReceiveCalls</maml:name> <maml:description> <maml:para>Specifies whether delegate is allowed to receive calls on behalf of the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>False</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PowerShell module 4.0.0 or later.</maml:para> <maml:para>The specified user need to have the Microsoft Phone System license assigned.</maml:para> <maml:para>You can see the delegate of a user by using the Get-CsUserCallingSettings cmdlet.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Set-CsUserCallingDelegate -Identity user1@contoso.com -Delegate user2@contoso.com -MakeCalls $false -ReceiveCalls $true -ManageSettings $false</dev:code> <dev:remarks> <maml:para>This example shows setting the permissions for user1@contoso.com's delegate user2@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>Set-CsUserCallingDelegate -Identity user1@contoso.com -Delegate user2@contoso.com -MakeCalls $true</dev:code> <dev:remarks> <maml:para>This example shows setting the MakeCalls permissions to True for user1@contoso.com's delegate user2@contoso.com.</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/set-csusercallingdelegate</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsUserCallingSettings</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"> <command:details> <command:name>Set-CsUserCallingSettings</command:name> <command:verb>Set</command:verb> <command:noun>CsUserCallingSettings</command:noun> <maml:description> <maml:para>This cmdlet will set the call forwarding, simultaneous ringing and call group settings for the specified user.</maml:para> </maml:description> </command:details> <maml:description> <maml:para>This cmdlet sets the call forwarding, simultaneous ringing and call group settings for the specified user.</maml:para> <maml:para>When specifying settings you need to specify all settings with a settings grouping, for instance, you can't just change a forwarding target. Instead, you need to start by getting the current settings, making the necessary changes, and then setting/writing all settings within the settings group.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-CsUserCallingSettings</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CallGroupOrder</maml:name> <maml:description> <maml:para>The order in which to call members of the Call Group. The supported values are Simultaneous and InOrder.</maml:para> <maml:para>You can only use InOrder, if the call group has 5 or less members.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CallGroupTargets</maml:name> <maml:description> <maml:para>The members of the Call Group. You need to always specify the full set of members as the parameter value. What you set here will overwrite the current call group membership.</maml:para> <maml:para>A call group can have up to 25 members.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Array of System.String</command:parameterValue> <dev:type> <maml:name>System.Array of System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-CsUserCallingSettings</maml:name> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ForwardingTarget</maml:name> <maml:description> <maml:para>The forwarding target. Supported types of values are ObjectId's, SIP addresses and phone numbers. For phone numbers we support the following types of formats: E.164 (+12065551234 or +1206555000;ext=1234) or non-E.164 like 1234.</maml:para> <maml:para>Only used when ForwardingTargetType is SingleTarget.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ForwardingTargetType</maml:name> <maml:description> <maml:para>The forwarding target type. Supported values are Voicemail, SingleTarget, MyDelegates and Group. Voicemail is only supported for Immediate forwarding.</maml:para> <maml:para>SingleTarget is used when forwarding to another user or PSTN phone number. MyDelegates is used when forwarding to the users's delegates (there needs to be at least 1 delegate). Group is used when forwarding to the user's call group (it needs to have at least 1 member).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ForwardingType</maml:name> <maml:description> <maml:para>The type of forwarding to set. Supported values are Immediate and Simultaneous</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-CsUserCallingSettings</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>GroupMembershipDetails</maml:name> <maml:description> <maml:para>The group membership details for the specified user. It is an array of ICallGroupMembershipDetails, which is an object containing the identity of an owner of a call group and the notification setting for the specified user for that call group.</maml:para> <maml:para>This parameter only exists if the specified user is a member of a call group. You can't create it, you can only change it.</maml:para> <maml:para>You need to always specify the full group membership details as the parameter value. What you set here will over-write the current group membership details.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Microsoft.Teams.ConfigAPI.Cmdlets.Generated.Models.ICallGroupMembershipDetails[]</command:parameterValue> <dev:type> <maml:name>Microsoft.Teams.ConfigAPI.Cmdlets.Generated.Models.ICallGroupMembershipDetails[]</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-CsUserCallingSettings</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>GroupNotificationOverride</maml:name> <maml:description> <maml:para>The group notification override that will be set on the specified user. The supported values are Ring, Mute and Banner.</maml:para> <maml:para>Setting this overrides the call group notification specified for the individual call group for the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-CsUserCallingSettings</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>IsForwardingEnabled</maml:name> <maml:description> <maml:para>This parameter controls whether forwarding is enabled or not.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-CsUserCallingSettings</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>IsForwardingEnabled</maml:name> <maml:description> <maml:para>This parameter controls whether forwarding is enabled or not.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-CsUserCallingSettings</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>IsUnansweredEnabled</maml:name> <maml:description> <maml:para>This parameter controls whether forwarding for unasnwered calls is enabled or not.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-CsUserCallingSettings</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>IsUnansweredEnabled</maml:name> <maml:description> <maml:para>This parameter controls whether forwarding for unasnwered calls is enabled or not.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-CsUserCallingSettings</maml:name> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>UnansweredDelay</maml:name> <maml:description> <maml:para>The time the call will ring the user before it is forwarded to the unanswered target. The supported format is hh:mm:ss and the delay range needs to be between 10 and 60 seconds in 10 seconds increments, i.e. 00:00:10, 00:00:20, 00:00:30, 00:00:40, 00:00:50 and 00:01:00. The default value is 20 seconds.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>UnansweredTarget</maml:name> <maml:description> <maml:para>The unanswered target. Supported type of values are ObjectId, SIP address and phone number. For phone numbers we support the following types of formats: E.164 (+12065551234 or +1206555000;ext=1234) or non-E.164 like 1234.</maml:para> <maml:para>Only used when UnansweredTargetType is SingleTarget.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>UnansweredTargetType</maml:name> <maml:description> <maml:para>The unanswered target type. Supported values are Voicemail, SingleTarget, MyDelegates and Group. </maml:para> <maml:para>SingleTarget is used when forwarding the unanswered call to another user or phone number. MyDelegates is used when forwarding the unanswered call to the users's delegates. Group is used when forwarding the unanswered call to the specified user's call group.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CallGroupOrder</maml:name> <maml:description> <maml:para>The order in which to call members of the Call Group. The supported values are Simultaneous and InOrder.</maml:para> <maml:para>You can only use InOrder, if the call group has 5 or less members.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>CallGroupTargets</maml:name> <maml:description> <maml:para>The members of the Call Group. You need to always specify the full set of members as the parameter value. What you set here will overwrite the current call group membership.</maml:para> <maml:para>A call group can have up to 25 members.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Array of System.String</command:parameterValue> <dev:type> <maml:name>System.Array of System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ForwardingTarget</maml:name> <maml:description> <maml:para>The forwarding target. Supported types of values are ObjectId's, SIP addresses and phone numbers. For phone numbers we support the following types of formats: E.164 (+12065551234 or +1206555000;ext=1234) or non-E.164 like 1234.</maml:para> <maml:para>Only used when ForwardingTargetType is SingleTarget.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ForwardingTargetType</maml:name> <maml:description> <maml:para>The forwarding target type. Supported values are Voicemail, SingleTarget, MyDelegates and Group. Voicemail is only supported for Immediate forwarding.</maml:para> <maml:para>SingleTarget is used when forwarding to another user or PSTN phone number. MyDelegates is used when forwarding to the users's delegates (there needs to be at least 1 delegate). Group is used when forwarding to the user's call group (it needs to have at least 1 member).</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>ForwardingType</maml:name> <maml:description> <maml:para>The type of forwarding to set. Supported values are Immediate and Simultaneous</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>GroupMembershipDetails</maml:name> <maml:description> <maml:para>The group membership details for the specified user. It is an array of ICallGroupMembershipDetails, which is an object containing the identity of an owner of a call group and the notification setting for the specified user for that call group.</maml:para> <maml:para>This parameter only exists if the specified user is a member of a call group. You can't create it, you can only change it.</maml:para> <maml:para>You need to always specify the full group membership details as the parameter value. What you set here will over-write the current group membership details.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Microsoft.Teams.ConfigAPI.Cmdlets.Generated.Models.ICallGroupMembershipDetails[]</command:parameterValue> <dev:type> <maml:name>Microsoft.Teams.ConfigAPI.Cmdlets.Generated.Models.ICallGroupMembershipDetails[]</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>GroupNotificationOverride</maml:name> <maml:description> <maml:para>The group notification override that will be set on the specified user. The supported values are Ring, Mute and Banner.</maml:para> <maml:para>Setting this overrides the call group notification specified for the individual call group for the specified user.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>Identity</maml:name> <maml:description> <maml:para>The Identity of the user to set call forwarding, simultaneous ringing and call group settings for. Can be specified using the ObjectId or the SIP address.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>IsForwardingEnabled</maml:name> <maml:description> <maml:para>This parameter controls whether forwarding is enabled or not.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>IsUnansweredEnabled</maml:name> <maml:description> <maml:para>This parameter controls whether forwarding for unasnwered calls is enabled or not.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.Boolean</command:parameterValue> <dev:type> <maml:name>System.Boolean</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>UnansweredDelay</maml:name> <maml:description> <maml:para>The time the call will ring the user before it is forwarded to the unanswered target. The supported format is hh:mm:ss and the delay range needs to be between 10 and 60 seconds in 10 seconds increments, i.e. 00:00:10, 00:00:20, 00:00:30, 00:00:40, 00:00:50 and 00:01:00. The default value is 20 seconds.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>UnansweredTarget</maml:name> <maml:description> <maml:para>The unanswered target. Supported type of values are ObjectId, SIP address and phone number. For phone numbers we support the following types of formats: E.164 (+12065551234 or +1206555000;ext=1234) or non-E.164 like 1234.</maml:para> <maml:para>Only used when UnansweredTargetType is SingleTarget.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="False" position="named" aliases="none"> <maml:name>UnansweredTargetType</maml:name> <maml:description> <maml:para>The unanswered target type. Supported values are Voicemail, SingleTarget, MyDelegates and Group. </maml:para> <maml:para>SingleTarget is used when forwarding the unanswered call to another user or phone number. MyDelegates is used when forwarding the unanswered call to the users's delegates. Group is used when forwarding the unanswered call to the specified user's call group.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">System.String</command:parameterValue> <dev:type> <maml:name>System.String</maml:name> <maml:uri /> </dev:type> <dev:defaultValue>None</dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name>None</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>System.Object</maml:name> </dev:type> <maml:description> <maml:para></maml:para> </maml:description> </command:returnValue> </command:returnValues> <maml:alertSet> <maml:alert> <maml:para>The cmdlet is available in Teams PowerShell module 4.0.0 or later.</maml:para> <maml:para>The specified user need to have the Microsoft Phone System license assigned.</maml:para> <maml:para>When forwarding to MyDelegates, the specified user needs to have one or more delegates defined that are allowed to receive calls. When forwarding to Group, the specified user needs to have one or more members of the user's call group.</maml:para> <maml:para>The cmdlet is validating the different settings and is always writing all the parameters in a settings group. You might see validation errors from the cmdlet due to this behavior. As an example, if you have ForwardingTargetType set to Group and you want to remove all members of the call group, you will get a validation error.</maml:para> <maml:para>You can specify a SIP URI without 'sip:' on input, but the output from Get-CsUserCallingSettings will show the full SIP URI.</maml:para> <maml:para>You are not able to configure delegates via this cmdlet. Please use New-CsUserCallingDelegate, Set-CsUserCallingDelegate cmdlets and Remove-CsUserCallingDelegate.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title>-------------------------- Example 1 --------------------------</maml:title> <dev:code>Set-CsUserCallingSettings -Identity user1@contoso.com -IsForwardingEnabled $true -ForwardingType Immediate -ForwardingTargetType Voicemail</dev:code> <dev:remarks> <maml:para>This example shows setting immediate call forwarding to voicemail for user1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 2 --------------------------</maml:title> <dev:code>Set-CsUserCallingSettings -Identity user1@contoso.com -IsForwardingEnabled $false</dev:code> <dev:remarks> <maml:para>This example shows removing call forwarding for user1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 3 --------------------------</maml:title> <dev:code>Set-CsUserCallingSettings -Identity user1@contoso.com -IsForwardingEnabled $true -ForwardingType Simultaneous -ForwardingTargetType SingleTarget -ForwardingTarget "+12065551234"</dev:code> <dev:remarks> <maml:para>This example shows setting simultaneous ringing to +12065551234 for user1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 4 --------------------------</maml:title> <dev:code>Set-CsUserCallingSettings -Identity user1@contoso.com -IsUnansweredEnabled $true -UnansweredTargetType MyDelegates -UnansweredDelay 00:00:30</dev:code> <dev:remarks> <maml:para>This example shows setting unanswered call forward to the delegates after 30 seconds for user1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 5 --------------------------</maml:title> <dev:code>$cgm = @("sip:user2@contoso.com","sip:user3@contoso.com") Set-CsUserCallingSettings -Identity user1@contoso.com -CallGroupOrder InOrder -CallGroupTargets $cgm Set-CsUserCallingSettings -Identity user1@contoso.com -IsForwardingEnabled $true -ForwardingType Immediate -ForwardingTargetType Group</dev:code> <dev:remarks> <maml:para>This example shows creating a call group for user1@contoso.com with 2 members and setting immediate call forward to the call group for user1@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 6 --------------------------</maml:title> <dev:code>$ucs = Get-CsUserCallingSettings -Identity user1@contoso.com $cgt = {$ucs.CallGroupTargets}.Invoke() $cgt.Add("sip:user5@contoso.com") $cgt.Remove("sip:user6@contoso.com") Set-CsUserCallingSettings -Identity user1@contoso.com -CallGroupOrder $ucs.CallGroupOrder -CallGroupTargets $cgt $gmd = (Get-CsUserCallingSettings -Identity user5@contoso.com).GroupMembershipDetails $gmd[[array]::IndexOf($gmd.CallGroupOwnerId,'sip:user1@contoso.com')].NotificationSetting = 'Banner' Set-CsUserCallingSettings -Identity user5@contoso.com -GroupMembershipDetails $gmd</dev:code> <dev:remarks> <maml:para>This example shows how to update the call group of user1@contoso.com to add user5@contoso.com and remove user6@contoso.com. In addition the notification setting for user5@contoso.com for user1@contoso.com's call group is set to Banner.</maml:para> <maml:para>The key to note here is the call group membership is defined on the object of the owner of the call group, in the above case this is user1@contoso.com. However, the notification setting for a member for a particular call group is defined on the member. In this case user5@contoso.com.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 7 --------------------------</maml:title> <dev:code>$ucs = Get-CsUserCallingSettings -Identity user1@contoso.com Set-CsUserCallingSettings -Identity user1@contoso.com -CallGroupOrder $ucs.CallGroupOrder -CallGroupTargets @()</dev:code> <dev:remarks> <maml:para>This example shows how to remove all members of the call group.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 8 --------------------------</maml:title> <dev:code>[Microsoft.Teams.ConfigAPI.Cmdlets.Generated.Models.ICallGroupMembershipDetails[]]$gmd = @( [Microsoft.Teams.ConfigAPI.Cmdlets.Generated.Models.ICallGroupMembershipDetails]@{CallGroupOwnerId='sip:user20@contoso.com';NotificationSetting='Banner'} [Microsoft.Teams.ConfigAPI.Cmdlets.Generated.Models.ICallGroupMembershipDetails]@{CallGroupOwnerId='sip:user30@contoso.com';NotificationSetting='Mute'} ) Set-CsUserCallingSettings -Identity user10@contoso.com -GroupMembershipDetails $gmd</dev:code> <dev:remarks> <maml:para>In this example user10@contoso.com is a member of two call groups: user20@contoso.com and user30@contoso.com. User10@contoso.com would like to have Banner notification for the first call group and Mute notification for the last one.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 9 --------------------------</maml:title> <dev:code>Set-CsUserCallingSettings -Identity user2@contoso.com -GroupNotificationOverride 'Mute'</dev:code> <dev:remarks> <maml:para>This example shows how to set the group notification override for user2@contoso.com. This setting overrides any specific notification setting set for the user on any call group the user is a member of.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 10 --------------------------</maml:title> <dev:code>Set-CsUserCallingSettings -Identity user6@contoso.com -IsForwardingEnabled $false Set-CsUserCallingSettings -Identity user6@contoso.com -IsUnansweredEnabled $true -UnansweredTargetType Voicemail -UnansweredDelay 00:00:20</dev:code> <dev:remarks> <maml:para>This example shows how to set the default call forwarding settings for a user.</maml:para> </dev:remarks> </command:example> <command:example> <maml:title>-------------------------- Example 11 --------------------------</maml:title> <dev:code>Set-CsUserCallingSettings -Identity user7@contoso.com -IsUnansweredEnabled $false</dev:code> <dev:remarks> <maml:para>This example shows turning off unanswered call forwarding for a user. The Microsoft Teams client will show this as If unanswered Do nothing .</maml:para> </dev:remarks> </command:example> </command:examples> <command:relatedLinks> <maml:navigationLink> <maml:linkText>Online Version:</maml:linkText> <maml:uri>https://learn.microsoft.com/powershell/module/teams/set-csusercallingsettings</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-CsUserCallingSettings</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-CsUserCallingDelegate</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </command:relatedLinks> </command:command> </helpItems> |