DSCResources/MSFT_EXOActiveSyncDeviceAccessRule/MSFT_EXOActiveSyncDeviceAccessRule.psm1
|
function Get-TargetResource { [CmdletBinding()] [OutputType([System.Collections.Hashtable])] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter()] [ValidateSet('Allow', 'Block', 'Quarantine')] [System.String] $AccessLevel, [Parameter()] [ValidateSet('DeviceModel', 'DeviceType', 'DeviceOS', 'UserAgent', 'XMSWLHeader')] [System.String] $Characteristic, [Parameter()] [System.String] $QueryString, [Parameter()] [ValidateSet('Present', 'Absent')] [System.String] $Ensure = 'Present', [Parameter()] [System.Management.Automation.PSCredential] $Credential, [Parameter()] [System.String] $ApplicationId, [Parameter()] [System.String] $TenantId, [Parameter()] [System.String] $CertificateThumbprint, [Parameter()] [System.String] $CertificatePath, [Parameter()] [System.Management.Automation.PSCredential] $CertificatePassword, [Parameter()] [Switch] $ManagedIdentity ) Write-Verbose -Message "Getting Active Sync Device Access Rule configuration for $Identity" if ($Global:CurrentModeIsExport) { $ConnectionMode = New-M365DSCConnection -Workload 'ExchangeOnline' ` -InboundParameters $PSBoundParameters ` -SkipModuleReload $true } else { $ConnectionMode = New-M365DSCConnection -Workload 'ExchangeOnline' ` -InboundParameters $PSBoundParameters } #Ensure the proper dependencies are installed in the current environment. Confirm-M365DSCDependencies #region Telemetry $ResourceName = $MyInvocation.MyCommand.ModuleName -replace 'MSFT_', '' $CommandName = $MyInvocation.MyCommand $data = Format-M365DSCTelemetryParameters -ResourceName $ResourceName ` -CommandName $CommandName ` -Parameters $PSBoundParameters Add-M365DSCTelemetryEvent -Data $data #endregion $nullReturn = $PSBoundParameters $nullReturn.Ensure = 'Absent' try { $AllActiveSyncDeviceAccessRules = Get-ActiveSyncDeviceAccessRule -ErrorAction Stop $ActiveSyncDeviceAccessRule = $AllActiveSyncDeviceAccessRules | Where-Object -FilterScript { $_.Identity -eq $Identity } if ($null -eq $ActiveSyncDeviceAccessRule) { Write-Verbose -Message "Active Sync Device Access Rule $($Identity) does not exist." return $nullReturn } else { $result = @{ Identity = $ActiveSyncDeviceAccessRule.Identity AccessLevel = $ActiveSyncDeviceAccessRule.AccessLevel Characteristic = $ActiveSyncDeviceAccessRule.Characteristic QueryString = $ActiveSyncDeviceAccessRule.QueryString Ensure = 'Present' Credential = $Credential ApplicationId = $ApplicationId TenantId = $TenantId CertificateThumbprint = $CertificateThumbprint CertificatePath = $CertificatePath CertificatePassword = $CertificatePassword Managedidentity = $ManagedIdentity.IsPresent } Write-Verbose -Message "Found Active Sync Device Access Rule $($Identity)" return $result } } catch { try { Write-Verbose -Message $_ $tenantIdValue = '' if (-not [System.String]::IsNullOrEmpty($TenantId)) { $tenantIdValue = $TenantId } elseif ($null -ne $Credential) { $tenantIdValue = $Credential.UserName.Split('@')[1] } Add-M365DSCEvent -Message $_ -EntryType 'Error' ` -EventID 1 -Source $($MyInvocation.MyCommand.Source) ` -TenantId $tenantIdValue } catch { Write-Verbose -Message $_ } return $nullReturn } } function Set-TargetResource { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter()] [ValidateSet('Allow', 'Block', 'Quarantine')] [System.String] $AccessLevel, [Parameter()] [ValidateSet('DeviceModel', 'DeviceType', 'DeviceOS', 'UserAgent', 'XMSWLHeader')] [System.String] $Characteristic, [Parameter()] [System.String] $QueryString, [Parameter()] [ValidateSet('Present', 'Absent')] [System.String] $Ensure = 'Present', [Parameter()] [System.Management.Automation.PSCredential] $Credential, [Parameter()] [System.String] $ApplicationId, [Parameter()] [System.String] $TenantId, [Parameter()] [System.String] $CertificateThumbprint, [Parameter()] [System.String] $CertificatePath, [Parameter()] [System.Management.Automation.PSCredential] $CertificatePassword, [Parameter()] [Switch] $ManagedIdentity ) Write-Verbose -Message "Setting Active Sync Device Access Rule configuration for $Identity" $currentActiveSyncDeviceAccessRuleConfig = Get-TargetResource @PSBoundParameters #Ensure the proper dependencies are installed in the current environment. Confirm-M365DSCDependencies #region Telemetry $ResourceName = $MyInvocation.MyCommand.ModuleName -replace 'MSFT_', '' $CommandName = $MyInvocation.MyCommand $data = Format-M365DSCTelemetryParameters -ResourceName $ResourceName ` -CommandName $CommandName ` -Parameters $PSBoundParameters Add-M365DSCTelemetryEvent -Data $data #endregion $ConnectionMode = New-M365DSCConnection -Workload 'ExchangeOnline' ` -InboundParameters $PSBoundParameters $NewActiveSyncDeviceAccessRuleParams = @{ AccessLevel = $AccessLevel Characteristic = $Characteristic QueryString = $QueryString Confirm = $false } $SetActiveSyncDeviceAccessRuleParams = @{ Identity = $Identity AccessLevel = $AccessLevel Confirm = $false } # CASE: Active Sync Device Access Rule doesn't exist but should; if ($Ensure -eq 'Present' -and $currentActiveSyncDeviceAccessRuleConfig.Ensure -eq 'Absent') { Write-Verbose -Message "Active Sync Device Access Rule '$($Identity)' does not exist but it should. Create and configure it." # Create Active Sync Device Access Rule New-ActiveSyncDeviceAccessRule @NewActiveSyncDeviceAccessRuleParams } # CASE: Active Sync Device Access Rule exists but it shouldn't; elseif ($Ensure -eq 'Absent' -and $currentActiveSyncDeviceAccessRuleConfig.Ensure -eq 'Present') { Write-Verbose -Message "Active Sync Device Access Rule '$($Identity)' exists but it shouldn't. Remove it." Remove-ActiveSyncDeviceAccessRule -Identity $Identity -Confirm:$false } # CASE: Active Sync Device Access Rule exists and it should, but has different values than the desired ones elseif ($Ensure -eq 'Present' -and $currentActiveSyncDeviceAccessRuleConfig.Ensure -eq 'Present') { Write-Verbose -Message "Active Sync Device Access Rule '$($Identity)' already exists, but needs updating." Write-Verbose -Message "Setting Active Sync Device Access Rule $($Identity) with values: $(Convert-M365DscHashtableToString -Hashtable $SetActiveSyncDeviceAccessRuleParams)" Set-ActiveSyncDeviceAccessRule @SetActiveSyncDeviceAccessRuleParams } } function Test-TargetResource { [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter()] [ValidateSet('Allow', 'Block', 'Quarantine')] [System.String] $AccessLevel, [Parameter()] [ValidateSet('DeviceModel', 'DeviceType', 'DeviceOS', 'UserAgent', 'XMSWLHeader')] [System.String] $Characteristic, [Parameter()] [System.String] $QueryString, [Parameter()] [ValidateSet('Present', 'Absent')] [System.String] $Ensure = 'Present', [Parameter()] [System.Management.Automation.PSCredential] $Credential, [Parameter()] [System.String] $ApplicationId, [Parameter()] [System.String] $TenantId, [Parameter()] [System.String] $CertificateThumbprint, [Parameter()] [System.String] $CertificatePath, [Parameter()] [System.Management.Automation.PSCredential] $CertificatePassword, [Parameter()] [Switch] $ManagedIdentity ) #Ensure the proper dependencies are installed in the current environment. Confirm-M365DSCDependencies #region Telemetry $ResourceName = $MyInvocation.MyCommand.ModuleName -replace 'MSFT_', '' $CommandName = $MyInvocation.MyCommand $data = Format-M365DSCTelemetryParameters -ResourceName $ResourceName ` -CommandName $CommandName ` -Parameters $PSBoundParameters Add-M365DSCTelemetryEvent -Data $data #endregion Write-Verbose -Message "Testing Active Sync Device Access Rule configuration for $Identity" $CurrentValues = Get-TargetResource @PSBoundParameters Write-Verbose -Message "Current Values: $(Convert-M365DscHashtableToString -Hashtable $CurrentValues)" Write-Verbose -Message "Target Values: $(Convert-M365DscHashtableToString -Hashtable $PSBoundParameters)" $ValuesToCheck = $PSBoundParameters $ValuesToCheck.Remove('Credential') | Out-Null $ValuesToCheck.Remove('ApplicationId') | Out-Null $ValuesToCheck.Remove('TenantId') | Out-Null $ValuesToCheck.Remove('CertificateThumbprint') | Out-Null $ValuesToCheck.Remove('CertificatePath') | Out-Null $ValuesToCheck.Remove('CertificatePassword') | Out-Null $ValuesToCheck.Remove('Managedidentity') | Out-Null $TestResult = Test-M365DSCParameterState -CurrentValues $CurrentValues ` -Source $($MyInvocation.MyCommand.Source) ` -DesiredValues $PSBoundParameters ` -ValuesToCheck $ValuesToCheck.Keys Write-Verbose -Message "Test-TargetResource returned $TestResult" return $TestResult } function Export-TargetResource { [CmdletBinding()] [OutputType([System.String])] param ( [Parameter()] [System.Management.Automation.PSCredential] $Credential, [Parameter()] [System.String] $ApplicationId, [Parameter()] [System.String] $TenantId, [Parameter()] [System.String] $CertificateThumbprint, [Parameter()] [System.String] $CertificatePath, [Parameter()] [System.Management.Automation.PSCredential] $CertificatePassword, [Parameter()] [Switch] $ManagedIdentity ) $ConnectionMode = New-M365DSCConnection -Workload 'ExchangeOnline' ` -InboundParameters $PSBoundParameters ` -SkipModuleReload $true #Ensure the proper dependencies are installed in the current environment. Confirm-M365DSCDependencies #region Telemetry $ResourceName = $MyInvocation.MyCommand.ModuleName -replace 'MSFT_', '' $CommandName = $MyInvocation.MyCommand $data = Format-M365DSCTelemetryParameters -ResourceName $ResourceName ` -CommandName $CommandName ` -Parameters $PSBoundParameters Add-M365DSCTelemetryEvent -Data $data #endregion try { [array]$AllActiveSyncDeviceAccessRules = Get-ActiveSyncDeviceAccessRule -ErrorAction Stop $dscContent = '' $i = 1 if ($AllActiveSyncDeviceAccessRules.Length -eq 0) { Write-Host $Global:M365DSCEmojiGreenCheckMark } else { Write-Host "`r`n" -NoNewline } foreach ($ActiveSyncDeviceAccessRule in $AllActiveSyncDeviceAccessRules) { Write-Host " |---[$i/$($AllActiveSyncDeviceAccessRules.Count)] $($ActiveSyncDeviceAccessRule.Identity)" -NoNewline $Params = @{ Identity = $ActiveSyncDeviceAccessRule.Identity Credential = $Credential ApplicationId = $ApplicationId TenantId = $TenantId CertificateThumbprint = $CertificateThumbprint CertificatePassword = $CertificatePassword Managedidentity = $ManagedIdentity.IsPresent CertificatePath = $CertificatePath } $Results = Get-TargetResource @Params $Results = Update-M365DSCExportAuthenticationResults -ConnectionMode $ConnectionMode ` -Results $Results $currentDSCBlock = Get-M365DSCExportContentForResource -ResourceName $ResourceName ` -ConnectionMode $ConnectionMode ` -ModulePath $PSScriptRoot ` -Results $Results ` -Credential $Credential Write-Host $Global:M365DSCEmojiGreenCheckMa $dscContent += $currentDSCBlock Save-M365DSCPartialExport -Content $currentDSCBlock ` -FileName $Global:PartialExportFileNamerk $i++ } return $dscContent } catch { try { Write-Verbose -Message $_ $tenantIdValue = '' if (-not [System.String]::IsNullOrEmpty($TenantId)) { $tenantIdValue = $TenantId } elseif ($null -ne $Credential) { $tenantIdValue = $Credential.UserName.Split('@')[1] } Add-M365DSCEvent -Message $_ -EntryType 'Error' ` -EventID 1 -Source $($MyInvocation.MyCommand.Source) ` -TenantId $tenantIdValue } catch { Write-Verbose -Message $_ } return '' } } Export-ModuleMember -Function *-TargetResource |