Public/Set-MerakiDeviceApplianceUplinksSettings.ps1
|
function Set-MerakiDeviceApplianceUplinksSettings { <# .SYNOPSIS Updates the Uplinks Settings for a Meraki device using the Meraki Dashboard API. .DESCRIPTION The Set-MerakiDeviceApplianceUplinksSettings function allows you to update the Uplinks Settings for a specified Meraki device by providing the authentication token, device serial number, and an Uplinks configuration string. .PARAMETER AuthToken The authentication token (API key) required to access the Meraki Dashboard API. .PARAMETER DeviceSerial The serial number of the Meraki device for which you want to update the Uplinks Settings. .PARAMETER UplinksConfig A string containing the Uplinks configuration. The string should be in JSON format and should include the "interfaces" property, as well as the configuration for each interface. .EXAMPLE $config = [PSCustomObject]@{ interfaces = @{ wan1 = @{ enabled = $true vlanTagging = @{ enabled = $true vlanId = 1 } svis = @{ ipv4 = @{ assignmentMode = "static" address = "9.10.11.10/16" gateway = "13.14.15.16" nameservers = @{ addresses = @("1.2.3.4") } } ipv6 = @{ assignmentMode = "static" address = "1:2:3::4" gateway = "1:2:3::5" nameservers = @{ addresses = @("1001:4860:4860::8888", "1001:4860:4860::8844") } } } pppoe = @{ enabled = $true authentication = @{ enabled = $true username = "username" password = "password" } } } wan2 = @{ enabled = $true vlanTagging = @{ enabled = $true vlanId = 1 } svis = @{ ipv4 = @{ assignmentMode = "static" address = "9.10.11.10/16" gateway = "13.14.15.16" nameservers = @{ addresses = @("1.2.3.4") } } ipv6 = @{ assignmentMode = "static" address = "1:2:3::4" gateway = "1:2:3::5" nameservers = @{ addresses = @("1001:4860:4860::8888", "1001:4860:4860::8844") } } } pppoe = @{ enabled = $true authentication = @{ enabled = $true username = "username" password = "password" } } } } } $config = $config | ConvertTo-Json -Compress Set-MerakiDeviceApplianceUplinksSettings -AuthToken "your-api-token" -DeviceSerial "Q2XX-XXXX-XXXX" -UplinksConfig $config This example updates the Uplinks Settings for the Meraki device with serial number "Q2XX-XXXX-XXXX". .NOTES The function requires the "Invoke-RestMethod" cmdlet to be available. The function returns the response from the API if the configuration is successful, otherwise, it displays an error message. #> [CmdletBinding()] param ( [parameter(Mandatory=$true)] [string]$AuthToken, [parameter(Mandatory=$true)] [string]$DeviceSerial, [parameter(Mandatory=$true)] [string]$UplinksConfig ) try { $header = @{ "X-Cisco-Meraki-API-Key" = $AuthToken "content-type" = "application/json; charset=utf-8" } $body = $UplinksConfig $url = "https://api.meraki.com/api/v1/devices/$DeviceSerial/appliance/uplinks/settings" $response = Invoke-RestMethod -Method Put -Uri $url -Header $header -UserAgent "MerakiPowerShellModule/1.0.2 DocNougat" -Body $body return $response } catch { Write-Host $_ Throw $_ } } |