Scripts/Reskit9/All Resources/xExchange/Examples/HelperScripts/ExchangeConfigHelper.psm1
|
#Takes a Servers.Csv file generated by the Exchange Server Role Requirements Calculator and turns the listed disks #into a DbMap which can be used with xExchAutoMountPoint. # #Params: #ServersCsvPath: The full path to the Servers.csv file to read #ServerNameInCsv: The name of the server in the Servers.csv file that matches this server. For instance, if SRV-##-01 was a server name in Servers.csv, but this server is SRV-01-01, you would pass in 'SRV-##-01' to correctly find the right set of databases #DbNameReplacements: Any replacements that should be in the database name. For instance, if a database name in the file was DAG-##-DB01, I would specificy: @{"##" = "01 }. This would replace all database name instance of ## with 01 function DBMapFromServersCsv { param([string]$ServersCsvPath, [string]$ServerNameInCsv, [Hashtable]$DbNameReplacements = @{}) #Output variable for the function [string[]]$dbMapOut = @() if ((Test-Path -LiteralPath "$($ServersCsvPath)") -eq $true) { $serversCsv = Import-Csv -LiteralPath "$($ServersCsvPath)" $foundServer = $false #Loop through until we find a matching server for ($i = 0; $i -lt $serversCsv.Count -and $foundServer -eq $false; $i++) { if ($serversCsv[$i].ServerName -like $ServerNameInCsv) { #We found a match, proceed $foundServer = $true $dbPerVolume = $serversCsv[$i].DbPerVolume if ($dbPerVolume -eq 0) { throw "DbPerVolume for server '$($ServerNameInCsv)'is 0" } #Turn the DbMap from string into an array $dbMapIn = $serversCsv[$i].DbMap.Split(',') if ($dbMapIn.Count -gt 0) { #Loop through the DbMap in increments of dbPerVolume and figure out which DB's will go on a single disk for ($j = 0; $j -lt $dbMapIn.Count; $j += $dbPerVolume) { [string]$currentDisk = "" #Loop through the individual DB's for this disk for ($k = $j; $k -lt $j + $dbPerVolume; $k++) { #This isn't the first DB on the disk so prepend a comma if ($k -gt $j) { $currentDisk += "," } #Make any requested replacements in the DB name $currentDb = StringReplaceFromHashtable -StringIn $dbMapIn[$k] -Replacements $DbNameReplacements #Add the db to the current disk string $currentDisk += $currentDb } #Add the finished disk to the output variable $dbMapOut += $currentDisk } } else { throw "No databases found in DbMap for server '$($ServerNameInCsv)' in file: $($ServersCsvPath)" } } } if ($foundServer -eq $false) { throw "Unable to find server '$($ServerNameInCsv)' in file: $($ServersCsvPath)" } } else { throw "Unable to access file at path: $($ServersCsvPath)" } return $dbMapOut } #Takes a MailboxDatabases.csv file generated by the Exchange Server Role Requirements Calculator and returns a list of databases and their properties. #This can then be used as input for the xExchMailboxDatabase resource. # #Params: #MailboxDatabasesCsvPath: The full path to the MailboxDatabases.csv file to read #ServerNameInCsv: The name of the server in the MailboxDatabases.csv file that matches this server. For instance, if SRV-##-01 was a server name in Servers.csv, but this server is SRV-01-01, you would pass in 'SRV-##-01' to correctly find the right set of databases #DbNameReplacements: Any replacements that should be in the database name, log path, or edb path. For instance, if a database name in the file was DAG-##-DB01, I would specificy: @{"##" = "01 }. This would replace all database name instance of ## with 01 function DBListFromMailboxDatabasesCsv { param([string]$MailboxDatabasesCsvPath, [string]$ServerNameInCsv, [Hashtable]$DbNameReplacements = @{}) #Output variable for the function [Array]$dbList = @() if ((Test-Path -LiteralPath "$($MailboxDatabasesCsvPath)") -eq $true) { $databasesCsv = Import-Csv -LiteralPath "$($MailboxDatabasesCsvPath)" #Loop through each database, and if it belongs to this server, at it to the list for ($i = 0; $i -lt $databasesCsv.Count; $i++) { if ($databasesCsv[$i].Server -like $ServerNameInCsv) { $dbIn = $databasesCsv[$i] #Build a custom object to hold all the DB props $currentDb = New-Object PSObject $currentDb | Add-Member NoteProperty Name (StringReplaceFromHashtable -StringIn $dbIn.Name -Replacements $DbNameReplacements) $currentDb | Add-Member NoteProperty DBFilePath (StringReplaceFromHashtable -StringIn $dbIn.DBFilePath -Replacements $DbNameReplacements) $currentDb | Add-Member NoteProperty LogFolderPath (StringReplaceFromHashtable -StringIn $dbIn.LogFolderPath -Replacements $DbNameReplacements) $currentDb | Add-Member NoteProperty DeletedItemRetention $dbIn.DeletedItemRetention $currentDb | Add-Member NoteProperty GC $dbIn.GC $currentDb | Add-Member NoteProperty OAB $dbIn.OAB $currentDb | Add-Member NoteProperty RetainDeletedItemsUntilBackup $dbIn.RetainDeletedItemsUntilBackup $currentDb | Add-Member NoteProperty IndexEnabled $dbIn.IndexEnabled $currentDb | Add-Member NoteProperty CircularLoggingEnabled $dbIn.CircularLoggingEnabled $currentDb | Add-Member NoteProperty ProhibitSendReceiveQuota $dbIn.ProhibitSendReceiveQuota $currentDb | Add-Member NoteProperty ProhibitSendQuota $dbIn.ProhibitSendQuota $currentDb | Add-Member NoteProperty IssueWarningQuota $dbIn.IssueWarningQuota $currentDb | Add-Member NoteProperty AllowFileRestore $dbIn.AllowFileRestore $currentDb | Add-Member NoteProperty BackgroundDatabaseMaintenance $dbIn.BackgroundDatabaseMaintenance $currentDb | Add-Member NoteProperty IsExcludedFromProvisioning $dbIn.IsExcludedFromProvisioning $currentDb | Add-Member NoteProperty IsSuspendedFromProvisioning $dbIn.IsSuspendedFromProvisioning $currentDb | Add-Member NoteProperty MailboxRetention $dbIn.MailboxRetention $currentDb | Add-Member NoteProperty MountAtStartup $dbIn.MountAtStartup $currentDb | Add-Member NoteProperty EventHistoryRetentionPeriod $dbIn.EventHistoryRetentionPeriod $currentDb | Add-Member NoteProperty AutoDagExcludeFromMonitoring $dbIn.AutoDagExcludeFromMonitoring $currentDb | Add-Member NoteProperty CalendarLoggingQuota $dbIn.CalendarLoggingQuota $currentDb | Add-Member NoteProperty IsExcludedFromInitialProvisioning $dbIn.IsExcludedFromInitialProvisioning $currentDb | Add-Member NoteProperty DataMoveReplicationConstraint $dbIn.DataMoveReplicationConstraint $currentDb | Add-Member NoteProperty RecoverableItemsQuota $dbIn.RecoverableItemsQuota $currentDb | Add-Member NoteProperty RecoverableItemsWarningQuota $dbIn.RecoverableItemsWarningQuota $dbList += $currentDb } } } else { throw "Unable to access file at path: $($MailboxDatabasesCsvPath)" } return $dbList } #Takes a MailboxDatabaseCopies.csv file generated by the Exchange Server Role Requirements Calculator and returns a list of databases and their properties. #This can then be used as input for the xExchMailboxDatabase resource. # #Params: #MailboxDatabaseCopiesCsvPath: The full path to the MailboxDatabaseCopies.csv file to read #ServerNameInCsv: The name of the server in the MailboxDatabaseCopies.csv file that matches this server. For instance, if SRV-##-01 was a server name in Servers.csv, but this server is SRV-01-01, you would pass in 'SRV-##-01' to correctly find the right set of databases #DbNameReplacements: Any replacements that should be in the database name, log path, or edb path. For instance, if a database name in the file was DAG-##-DB01, I would specificy: @{"##" = "01 }. This would replace all database name instance of ## with 01 function DBListFromMailboxDatabaseCopiesCsv { param([string]$MailboxDatabaseCopiesCsvPath, [string]$ServerNameInCsv, [Hashtable]$DbNameReplacements = @{}) #Output variable for the function [Array]$dbList = @() if ((Test-Path -LiteralPath "$($MailboxDatabaseCopiesCsvPath)") -eq $true) { $databasesCsv = Import-Csv -LiteralPath "$($MailboxDatabaseCopiesCsvPath)" #Loop through each database, and if it belongs to this server, at it to the list for ($i = 0; $i -lt $databasesCsv.Count; $i++) { if ($databasesCsv[$i].Server -like $ServerNameInCsv) { $dbIn = $databasesCsv[$i] #Build a custom object to hold all the DB props $currentDb = New-Object PSObject $currentDb | Add-Member NoteProperty Name (StringReplaceFromHashtable -StringIn $dbIn.Name -Replacements $DbNameReplacements) $currentDb | Add-Member NoteProperty ActivationPreference $dbIn.ActivationPreference $currentDb | Add-Member NoteProperty ReplayLagTime $dbIn.ReplayLagTime $currentDb | Add-Member NoteProperty TruncationLagTime $dbIn.TruncationLagTime $dbList += $currentDb } } } else { throw "Unable to access file at path: $($MailboxDatabasesCsvPath)" } return $dbList } #Takes a string, makes any replacements specified in the hashtable, and then returns the new string function StringReplaceFromHashtable { param([string]$StringIn, $Replacements = @{}) if ($Replacements.Count -gt 0) { foreach ($key in $Replacements.Keys) { $StringIn = $StringIn.Replace($key, $Replacements[$key]) } } return $StringIn } Export-ModuleMember -Function * |