internal/Set-JcSdkInternalUserGroup.ps1
|
# ---------------------------------------------------------------------------------- # Code generated by Microsoft (R) AutoRest Code Generator (autorest: 3.6.6, generator: @autorest/powershell@3.0.463) # Changes may cause incorrect behavior and will be lost if the code is regenerated. # ---------------------------------------------------------------------------------- <# .Synopsis This endpoint allows you to do a full update of the User Group.\n\nSee the [Dynamic Group Configuration KB article](https://jumpcloud.com/support/configure-dynamic-device-groups) for more details on maintaining a Dynamic Group.\n\n#### Sample Request\n```\ncurl -X PUT https://console.jumpcloud.com/api/v2/usergroups/{Group_ID} \\\n -H 'Accept: application/json' \\\n -H 'Content-Type: application/json' \\\n -H 'x-api-key: {API_KEY}' \\\n -d '{\n \"name\": \"group_update\"\n }'\n``` .Description This endpoint allows you to do a full update of the User Group.\n\nSee the [Dynamic Group Configuration KB article](https://jumpcloud.com/support/configure-dynamic-device-groups) for more details on maintaining a Dynamic Group.\n\n#### Sample Request\n```\ncurl -X PUT https://console.jumpcloud.com/api/v2/usergroups/{Group_ID} \\\n -H 'Accept: application/json' \\\n -H 'Content-Type: application/json' \\\n -H 'x-api-key: {API_KEY}' \\\n -d '{\n \"name\": \"group_update\"\n }'\n``` .Example PS C:\> {{ Add code here }} {{ Add output here }} .Example PS C:\> {{ Add code here }} {{ Add output here }} .Inputs JumpCloud.SDK.V2.Models.IJumpCloudApiIdentity .Inputs JumpCloud.SDK.V2.Models.IUserGroupPut .Outputs JumpCloud.SDK.V2.Models.IUserGroup .Notes COMPLEX PARAMETER PROPERTIES To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables. BODY <IUserGroupPut>: UserGroupPut Name <String>: Display name of a User Group. [Attributes <IGroupAttributesUserGroup>]: The graph attributes for a UserGroup. [(Any) <Object>]: This indicates any property can be added to this object. [SudoEnabled <Boolean?>]: Enables sudo [SudoWithoutPassword <Boolean?>]: Enable sudo without password (requires 'enabled' to be true) [LdapGroups <ILdapGroup[]>]: [Name <String>]: [PosixGroups <IGraphAttributePosixGroupsItem[]>]: Id <Int32>: Name <String>: [RadiusReply <IGraphAttributeRadiusReplyItem[]>]: Name <String>: Value <String>: [SambaEnabled <Boolean?>]: [Description <String>]: Description of a User Group [Email <String>]: Email address of a User Group [MemberQueryExemptions <IGraphObject[]>]: Array of GraphObjects exempted from the query Id <String>: The ObjectID of the graph object. Type <String>: The type of graph object. [Attributes <IGraphAttributes>]: The graph attributes. [(Any) <Object>]: This indicates any property can be added to this object. [MemberQueryFilters <IAny[]>]: [MemberQueryType <String>]: [MemberSuggestionsNotify <Boolean?>]: True if notification emails are to be sent for membership suggestions. [MembershipMethod <String>]: The type of membership method for this group. Valid values include NOTSET, STATIC, DYNAMIC_REVIEW_REQUIRED, and DYNAMIC_AUTOMATED. Note DYNAMIC_AUTOMATED and DYNAMIC_REVIEW_REQUIRED group rules will supersede any group enrollment for [group-associated MDM-enrolled devices](https://jumpcloud.com/support/change-a-default-device-group-for-apple-devices). Use caution when creating dynamic device groups with MDM-enrolled devices to avoid creating conflicting rule sets. INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter [AccountId <String>]: [ActivedirectoryId <String>]: [AdministratorId <String>]: [AgentId <String>]: [AppleMdmId <String>]: [ApplicationId <String>]: ObjectID of the Application. [CommandId <String>]: ObjectID of the Command. [CustomEmailType <String>]: [DeviceId <String>]: [GroupId <String>]: ObjectID of the Policy Group. [GsuiteId <String>]: ObjectID of the G Suite instance. [Id <String>]: ObjectID of this Active Directory instance. [JobId <String>]: [LdapserverId <String>]: ObjectID of the LDAP Server. [Office365Id <String>]: ObjectID of the Office 365 instance. [PolicyId <String>]: ObjectID of the Policy. [ProviderId <String>]: [PushEndpointId <String>]: [RadiusserverId <String>]: ObjectID of the Radius Server. [SoftwareAppId <String>]: ObjectID of the Software App. [SystemId <String>]: ObjectID of the System. [UserId <String>]: ObjectID of the User. [WorkdayId <String>]: MEMBERQUERYEXEMPTIONS <IGraphObject[]>: Array of GraphObjects exempted from the query Id <String>: The ObjectID of the graph object. Type <String>: The type of graph object. [Attributes <IGraphAttributes>]: The graph attributes. [(Any) <Object>]: This indicates any property can be added to this object. .Link https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V2/docs/exports/Set-JcSdkInternalUserGroup.md #> function Set-JcSdkInternalUserGroup { [OutputType([JumpCloud.SDK.V2.Models.IUserGroup])] [CmdletBinding(DefaultParameterSetName='SetExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')] param( [Parameter(ParameterSetName='Set', Mandatory)] [Parameter(ParameterSetName='SetExpanded', Mandatory)] [JumpCloud.SDK.V2.Category('Path')] [System.String] # ObjectID of the User Group. ${Id}, [Parameter(ParameterSetName='SetViaIdentity', Mandatory, ValueFromPipeline)] [Parameter(ParameterSetName='SetViaIdentityExpanded', Mandatory, ValueFromPipeline)] [JumpCloud.SDK.V2.Category('Path')] [JumpCloud.SDK.V2.Models.IJumpCloudApiIdentity] # Identity Parameter # To construct, see NOTES section for INPUTOBJECT properties and create a hash table. ${InputObject}, [Parameter(ParameterSetName='Set', Mandatory, ValueFromPipeline)] [Parameter(ParameterSetName='SetViaIdentity', Mandatory, ValueFromPipeline)] [JumpCloud.SDK.V2.Category('Body')] [JumpCloud.SDK.V2.Models.IUserGroupPut] # UserGroupPut # To construct, see NOTES section for BODY properties and create a hash table. ${Body}, [Parameter(ParameterSetName='SetExpanded', Mandatory)] [Parameter(ParameterSetName='SetViaIdentityExpanded', Mandatory)] [JumpCloud.SDK.V2.Category('Body')] [System.String] # Display name of a User Group. ${Name}, [Parameter(ParameterSetName='SetExpanded')] [Parameter(ParameterSetName='SetViaIdentityExpanded')] [JumpCloud.SDK.V2.Category('Body')] [JumpCloud.SDK.V2.Runtime.Info(PossibleTypes=([JumpCloud.SDK.V2.Models.IGroupAttributesUserGroup]))] [System.Collections.Hashtable] # The graph attributes for a UserGroup. ${Attributes}, [Parameter(ParameterSetName='SetExpanded')] [Parameter(ParameterSetName='SetViaIdentityExpanded')] [JumpCloud.SDK.V2.Category('Body')] [System.String] # Description of a User Group ${Description}, [Parameter(ParameterSetName='SetExpanded')] [Parameter(ParameterSetName='SetViaIdentityExpanded')] [JumpCloud.SDK.V2.Category('Body')] [System.String] # Email address of a User Group ${Email}, [Parameter(ParameterSetName='SetExpanded')] [Parameter(ParameterSetName='SetViaIdentityExpanded')] [AllowEmptyCollection()] [JumpCloud.SDK.V2.Category('Body')] [JumpCloud.SDK.V2.Models.IGraphObject[]] # Array of GraphObjects exempted from the query # To construct, see NOTES section for MEMBERQUERYEXEMPTIONS properties and create a hash table. ${MemberQueryExemptions}, [Parameter(ParameterSetName='SetExpanded')] [Parameter(ParameterSetName='SetViaIdentityExpanded')] [AllowEmptyCollection()] [JumpCloud.SDK.V2.Category('Body')] [JumpCloud.SDK.V2.Models.IAny[]] # . ${MemberQueryFilters}, [Parameter(ParameterSetName='SetExpanded')] [Parameter(ParameterSetName='SetViaIdentityExpanded')] [JumpCloud.SDK.V2.Category('Body')] [System.String] # . ${MemberQueryType}, [Parameter(ParameterSetName='SetExpanded')] [Parameter(ParameterSetName='SetViaIdentityExpanded')] [JumpCloud.SDK.V2.Category('Body')] [System.Management.Automation.SwitchParameter] # True if notification emails are to be sent for membership suggestions. ${MemberSuggestionsNotify}, [Parameter(ParameterSetName='SetExpanded')] [Parameter(ParameterSetName='SetViaIdentityExpanded')] [JumpCloud.SDK.V2.Category('Body')] [System.String] # The type of membership method for this group. # Valid values include NOTSET, STATIC, DYNAMIC_REVIEW_REQUIRED, and DYNAMIC_AUTOMATED.Note DYNAMIC_AUTOMATED and DYNAMIC_REVIEW_REQUIRED group rules will supersede any group enrollment for [group-associated MDM-enrolled devices](https://jumpcloud.com/support/change-a-default-device-group-for-apple-devices).Use caution when creating dynamic device groups with MDM-enrolled devices to avoid creating conflicting rule sets. ${MembershipMethod}, [Parameter(DontShow)] [JumpCloud.SDK.V2.Category('Runtime')] [System.Management.Automation.SwitchParameter] # Wait for .NET debugger to attach ${Break}, [Parameter(DontShow)] [ValidateNotNull()] [JumpCloud.SDK.V2.Category('Runtime')] [JumpCloud.SDK.V2.Runtime.SendAsyncStep[]] # SendAsync Pipeline Steps to be appended to the front of the pipeline ${HttpPipelineAppend}, [Parameter(DontShow)] [ValidateNotNull()] [JumpCloud.SDK.V2.Category('Runtime')] [JumpCloud.SDK.V2.Runtime.SendAsyncStep[]] # SendAsync Pipeline Steps to be prepended to the front of the pipeline ${HttpPipelinePrepend}, [Parameter(DontShow)] [JumpCloud.SDK.V2.Category('Runtime')] [System.Uri] # The URI for the proxy server to use ${Proxy}, [Parameter(DontShow)] [ValidateNotNull()] [JumpCloud.SDK.V2.Category('Runtime')] [System.Management.Automation.PSCredential] # Credentials for a proxy server to use for the remote call ${ProxyCredential}, [Parameter(DontShow)] [JumpCloud.SDK.V2.Category('Runtime')] [System.Management.Automation.SwitchParameter] # Use the default credentials for the proxy ${ProxyUseDefaultCredentials} ) begin { try { $outBuffer = $null if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) { $PSBoundParameters['OutBuffer'] = 1 } $parameterSet = $PSCmdlet.ParameterSetName $mapping = @{ Set = 'JumpCloud.SDK.V2.private\Set-JcSdkInternalUserGroup_Set'; SetExpanded = 'JumpCloud.SDK.V2.private\Set-JcSdkInternalUserGroup_SetExpanded'; SetViaIdentity = 'JumpCloud.SDK.V2.private\Set-JcSdkInternalUserGroup_SetViaIdentity'; SetViaIdentityExpanded = 'JumpCloud.SDK.V2.private\Set-JcSdkInternalUserGroup_SetViaIdentityExpanded'; } $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet) $scriptCmd = {& $wrappedCmd @PSBoundParameters} $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin) $steppablePipeline.Begin($PSCmdlet) } catch { throw } } process { try { $steppablePipeline.Process($_) } catch { throw } } end { try { $steppablePipeline.End() } catch { throw } } } |