HelpCache/IpamAddress.cdxml-help.xml
|
<?xml version = "1.0" encoding = "utf-8" ?>
<helpItems schema="maml"> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"><command:details><command:name>Add-IpamAddress</command:name><maml:description><maml:para>Adds an IP address to IPAM.</maml:para></maml:description><maml:copyright><maml:para /></maml:copyright><command:verb>Add</command:verb><command:noun>IpamAddress</command:noun><dev:version /></command:details><maml:description><maml:para>The Add-IpamAddress cmdlet adds an IP address to IP Address Management (IPAM). You can use the cmdlet to associate the Dynamic Host Configuration Protocol (DHCP) reservation properties with the IP address. The cmdlet does not create a reservation on the DHCP server. You can use Windows PowerShell for DHCP Server to create a reservation on the DHCP server. </maml:para></maml:description><command:syntax><command:syntaxItem><maml:name>Add-IpamAddress</maml:name><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="2" aliases=""><maml:name>IpAddress</maml:name><maml:description><maml:para>Specifies an IP address. The cmdlet adds the IP address to IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">IPAddress</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="3" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies the name of the service that manages the IP address. The value that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM. </maml:para><maml:para>You can use the Add-IpamCustomValue cmdlet to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue cmdlet to remove a value from the ManagedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="4" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies the instance of the service that manages the IP address. Specify the instance of the service that you specified for the ManagedByService parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies the address space that is associated with the IP address. The default value is Default. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssetTag</maml:name><maml:description><maml:para>Specifies the asset tag associated with the IP address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentDate</maml:name><maml:description><maml:para>Specifies the date on which you assigned the IP address to a device. To obtain a DateTime object, use the Get-Date cmdlet. For more information, type Get-Help Get-Date.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentType</maml:name><maml:description><maml:para>Specifies how IPAM assigns this address. The acceptable values for this parameter are: -- Static -- Dynamic -- Auto -- VIP -- Reserved The default value is Static.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressAssignment</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ClientId</maml:name><maml:description><maml:para>Specifies the ID of the client.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>CustomConfiguration</maml:name><maml:description><maml:para>Specifies semicolon-separated name/value pairs. This parameter specifies custom metadata that is associated with the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Description</maml:name><maml:description><maml:para>Specifies a description of the IP address assignment for a device.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceName</maml:name><maml:description><maml:para>Specifies the name of the device to which you assigned the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceType</maml:name><maml:description><maml:para>Specifies the type of device to which you assigned the address. Specify a value that exists in the built-in DeviceType custom field. The acceptable values for this parameter are: -- VM -- Host The default value is Host.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Duid</maml:name><maml:description><maml:para>Specifies the DHCP device unique identifier (DUID) for the client. Clients use the DUID to get an IP address from a DHCPv6 server.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ExpiryDate</maml:name><maml:description><maml:para>Specifies an expiry date for the address. IPAM alerts the administrator when the IP address expires. IPAM does not reclaim expired addresses automatically.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ForwardLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the name of the DNS server that IPAM uses to resolve host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="FwdLookupZone"><maml:name>ForwardLookupZone</maml:name><maml:description><maml:para>Specifies the name of the forward lookup zone that contains a mapping of host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Iaid</maml:name><maml:description><maml:para>Specifies the identity association ID (IAID) of an IPv6 address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">UInt32</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>IpAddressState</maml:name><maml:description><maml:para>Specifies the usage state of the IP address. By default, the cmdlet sets the address as In-Use. You can specify a valid custom value for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>MacAddress</maml:name><maml:description><maml:para>Specifies the media access control (MAC) address of the device to which the address is assigned.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies the network type of the address. The acceptable values for this parameter are: -- Provider -- Customer -- NonVirtualized The default value is NonVirtualized.</maml:para><maml:para>If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">VirtualizationType</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Owner</maml:name><maml:description><maml:para>Specifies the name of the owner of the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationDescription</maml:name><maml:description><maml:para>Specifies a description for the DHCP reservation.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationName</maml:name><maml:description><maml:para>Specifies the name of the reservation on the DHCP server for the device. You must specify a value for this parameter if you specify the ReservationServer parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationServer</maml:name><maml:description><maml:para>Specifies the DHCP server on which the reservation is assigned. The cmdlet stores the reservation data in IPAM. The cmdlet does not create a reservation on the DHCP server. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationType</maml:name><maml:description><maml:para>Specifies the protocols that the reservation supports. You must specify a value for this parameter if you specify the ReservationServer parameter. The acceptable values for this parameter are: -- DHCP -- BootPr -- DHCP and BootPr</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DhcpReservationType</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReverseLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the DNS server that IPAM uses to resolve IP addresses to host names. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="RevLookupZone"><maml:name>ReverseLookupZone</maml:name><maml:description><maml:para>Specifies the reverse lookup zone that contains the mapping from IP addresses to fully qualified domain names (FQDNs).</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="SN"><maml:name>SerialNumber</maml:name><maml:description><maml:para>Specifies the serial number of the device that is associated with the IP address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description></command:parameter></command:syntaxItem></command:syntax><command:parameters><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies the address space that is associated with the IP address. The default value is Default. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue>Default</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssetTag</maml:name><maml:description><maml:para>Specifies the asset tag associated with the IP address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentDate</maml:name><maml:description><maml:para>Specifies the date on which you assigned the IP address to a device. To obtain a DateTime object, use the Get-Date cmdlet. For more information, type Get-Help Get-Date.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue><dev:type><maml:name>DateTime</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentType</maml:name><maml:description><maml:para>Specifies how IPAM assigns this address. The acceptable values for this parameter are: -- Static -- Dynamic -- Auto -- VIP -- Reserved The default value is Static.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressAssignment</command:parameterValue><dev:type><maml:name>AddressAssignment</maml:name><maml:uri /></dev:type><dev:defaultValue>Static</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue><dev:type><maml:name>CimSession[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ClientId</maml:name><maml:description><maml:para>Specifies the ID of the client.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>CustomConfiguration</maml:name><maml:description><maml:para>Specifies semicolon-separated name/value pairs. This parameter specifies custom metadata that is associated with the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Description</maml:name><maml:description><maml:para>Specifies a description of the IP address assignment for a device.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceName</maml:name><maml:description><maml:para>Specifies the name of the device to which you assigned the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceType</maml:name><maml:description><maml:para>Specifies the type of device to which you assigned the address. Specify a value that exists in the built-in DeviceType custom field. The acceptable values for this parameter are: -- VM -- Host The default value is Host.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue>Host</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Duid</maml:name><maml:description><maml:para>Specifies the DHCP device unique identifier (DUID) for the client. Clients use the DUID to get an IP address from a DHCPv6 server.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ExpiryDate</maml:name><maml:description><maml:para>Specifies an expiry date for the address. IPAM alerts the administrator when the IP address expires. IPAM does not reclaim expired addresses automatically.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue><dev:type><maml:name>DateTime</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ForwardLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the name of the DNS server that IPAM uses to resolve host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="FwdLookupZone"><maml:name>ForwardLookupZone</maml:name><maml:description><maml:para>Specifies the name of the forward lookup zone that contains a mapping of host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Iaid</maml:name><maml:description><maml:para>Specifies the identity association ID (IAID) of an IPv6 address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">UInt32</command:parameterValue><dev:type><maml:name>UInt32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="2" aliases=""><maml:name>IpAddress</maml:name><maml:description><maml:para>Specifies an IP address. The cmdlet adds the IP address to IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">IPAddress</command:parameterValue><dev:type><maml:name>IPAddress</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>IpAddressState</maml:name><maml:description><maml:para>Specifies the usage state of the IP address. By default, the cmdlet sets the address as In-Use. You can specify a valid custom value for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue>In-Use</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>MacAddress</maml:name><maml:description><maml:para>Specifies the media access control (MAC) address of the device to which the address is assigned.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="3" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies the name of the service that manages the IP address. The value that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM. </maml:para><maml:para>You can use the Add-IpamCustomValue cmdlet to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue cmdlet to remove a value from the ManagedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue>IPAM</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies the network type of the address. The acceptable values for this parameter are: -- Provider -- Customer -- NonVirtualized The default value is NonVirtualized.</maml:para><maml:para>If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">VirtualizationType</command:parameterValue><dev:type><maml:name>VirtualizationType</maml:name><maml:uri /></dev:type><dev:defaultValue>NonVirtualized</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Owner</maml:name><maml:description><maml:para>Specifies the name of the owner of the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationDescription</maml:name><maml:description><maml:para>Specifies a description for the DHCP reservation.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationName</maml:name><maml:description><maml:para>Specifies the name of the reservation on the DHCP server for the device. You must specify a value for this parameter if you specify the ReservationServer parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationServer</maml:name><maml:description><maml:para>Specifies the DHCP server on which the reservation is assigned. The cmdlet stores the reservation data in IPAM. The cmdlet does not create a reservation on the DHCP server. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationType</maml:name><maml:description><maml:para>Specifies the protocols that the reservation supports. You must specify a value for this parameter if you specify the ReservationServer parameter. The acceptable values for this parameter are: -- DHCP -- BootPr -- DHCP and BootPr</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DhcpReservationType</command:parameterValue><dev:type><maml:name>DhcpReservationType</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReverseLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the DNS server that IPAM uses to resolve IP addresses to host names. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="RevLookupZone"><maml:name>ReverseLookupZone</maml:name><maml:description><maml:para>Specifies the reverse lookup zone that contains the mapping from IP addresses to fully qualified domain names (FQDNs).</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="SN"><maml:name>SerialNumber</maml:name><maml:description><maml:para>Specifies the serial number of the device that is associated with the IP address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="4" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies the instance of the service that manages the IP address. Specify the instance of the service that you specified for the ManagedByService parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue>Localhost</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue><dev:type><maml:name>Int32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue>false</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue>false</dev:defaultValue></command:parameter></command:parameters><command:inputTypes><command:inputType><dev:type><maml:name></maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description></maml:description></command:inputType></command:inputTypes><command:returnValues><command:returnValue><dev:type><maml:name>IpamAddress</maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description><maml:para> Represents an IP address on the IPAM server. </maml:para></maml:description></command:returnValue></command:returnValues><command:terminatingErrors /><command:nonTerminatingErrors /><command:examples><command:example><maml:title>Example 1: Add a physical IP address to the IPAM server</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Add-IpamAddress -IpAddress 10.12.3.5 -PassThru IpAddress : 10.12.3.5 Type : NonVirtualized Duplicate : False ExpiryStatus : Not Expired MacAddress : ManagedByService : IPAM ServiceInstance : Localhost DeviceName : DeviceType : Host IpAddressState : In-Use AssignmentType : Static </dev:code><dev:remarks><maml:para>This command adds the physical IP address 10.12.3.5 to the default address space that the current instance of the IPAM server manages. The command uses the following default values for the address: -- ManagedByService parameter uses the default value IPAM -- ServiceInstance parameter uses the default value Localhost -- DeviceType parameter uses the default value Host -- AssignmentType parameter uses the default value Static</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 2: Assign a dynamic IP address to a virtual machine</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Add-IpamAddress -IpAddress 10.12.4.9 -ManagedByService "TSQA DHCP" -ServiceInstance "dhcp1.contoso.com" -AssignmentType Dynamic -DeviceType VM -ExpiryDate $TwoWeeksFromNow -PassThru IpAddress : 10.12.4.9 Type : NonVirtualized Duplicate : False ExpiryStatus : Not Expired MacAddress : ManagedByService : MS DHCP ServiceInstance : dhcp1.contoso.com DeviceName : DeviceType : VM IpAddressState : In-Use AssignmentType : Dynamic </dev:code><dev:remarks><maml:para>This command assigns the IP address 10.12.4.8 to a virtual machine. The command specifies that the DHCP server named dhcp1.contoso.com manages the address. The command specifies that the address expires in two weeks, at which time you can reclaim it.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 3: Add a provider IP address to the IPAM server</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Add-IpamAddress -NetworkType Provider -IpAddress 172.16.10.16 -PassThru IpAddress : 172.16.10.16 NetworkType : Provider Duplicate : False ExpiryStatus : Not Expired MacAddress : ManagedByService : IPAM ServiceInstance : Localhost DeviceName : DeviceType : Host IpAddressState : In-Use AssignmentType : Static </dev:code><dev:remarks><maml:para>This command adds the provider IP address 172.16.10.16 (which the current instance of IPAM manages) to the default address space.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 4: Add a provider IP address that Virtual Machine Manager manages</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Add-IpamAddress -IpAddress 172.16.10.16 -AddressSpace "Datacenter01" -ManagedByService VMM -ServiceInstance "vmm1.contoso.com" -PassThru IpAddress : 172.16.10.16 NetworkType : Provider Duplicate : False ExpiryStatus : Not Expired MacAddress : ManagedByService : VMM ServiceInstance : vmm1.contoso.com DeviceName : DeviceType : Host IpAddressState : In-Use AssignmentType : Static </dev:code><dev:remarks><maml:para>This command adds a provider IP address that is managed by System Center 2012 R2 Virtual Machine Manager and belongs to the provider address space named Datacenter01. Virtual Machine Manager statically manages the address assignment. Because this address is in a different address space, IPAM does not mark it as a duplicate.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 5: Add a customer IP address that a Virtual Machine Manager instance manages</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Add-IpamAddress -IpAddress 172.16.10.16 -Virtual -AddressSpace "Datacenter01" -ManagedByService VMM -ServiceInstance "vmm01.contoso.com" -DeviceType VM IpAddress : 172.16.10.16 NetworkType : Customer Duplicate : False ExpiryStatus : Not Expired MacAddress : ManagedByService : VMM ServiceInstance : vmm01.contoso.com DeviceName : DeviceType : VM IpAddressState : In-Use AssignmentType : Static </dev:code><dev:remarks><maml:para>This command adds a customer IP address that the System Center 2012 R2 Virtual Machine Manager instance vmm01.contoso.com manages. The address is added to the customer address space for the tenant named Datacenter01.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example></command:examples><maml:relatedLinks><maml:navigationLink><maml:linkText>Online Version:</maml:linkText><maml:uri>http://go.microsoft.com/fwlink/?LinkID=309391</maml:uri></maml:navigationLink><maml:navigationLink><maml:linkText>Get-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Set-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Remove-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Import-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Export-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Get-IpamCustomField</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Get-IpamAddressSpace</maml:linkText><maml:uri /></maml:navigationLink></maml:relatedLinks></command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"><command:details><command:name>Export-IpamAddress</command:name><maml:description><maml:para>Exports IP addresses from IPAM.</maml:para></maml:description><maml:copyright><maml:para /></maml:copyright><command:verb>Export</command:verb><command:noun>IpamAddress</command:noun><dev:version /></command:details><maml:description><maml:para>The Export-IpamAddress cmdlet exports all of the IP addresses from an address family in IP Address Management (IPAM). The cmdlet exports the IP addresses as a comma-separated value (CSV) file.</maml:para><maml:para>The field header names and the enumurated values of IP address objects that this cmdlet exports have English names that are culture-independent (invariant) and are not in the localized language that the server uses. The field header names follow the Windows PowerShell property naming conventions. The format of date and time values of the exported objects are in the localized format of the computer that runs the IPAM server and not in Coordinated Universal Time (UTC).</maml:para><maml:para>The IPAM client console and IPAM Server cmdlets in Windows PowerShell support interoperability between import and export functionality of English and localized CSV files, provided that the language and locale of the computers that run the IPAM server that import and export IP addresses are the same. You can import a localized CSV file that you export from a computer that runs the IPAM client UI by using IPAM Windows PowerShell. You can import an English CSV file that you exported by using IPAM Windows PowerShell from a computer that runs the IPAM client provided the language and locale of the computers that run the IPAM client and IPAM server are the same.</maml:para></maml:description><command:syntax><command:syntaxItem><maml:name>Export-IpamAddress</maml:name><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Force</maml:name><maml:description><maml:para>Indicates that the cmdlet overwrites a CSV file that has the same name that you specify for the Path parameter.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies an IPv4 or IPv6 network prefix, in Classless InterDomain Routing (CIDR) notation. This parameter specifies the IP subnet of the IP address range for which to import the addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">VirtualizationType</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Path</maml:name><maml:description><maml:para>Specifies the absolute path of the exported CSV file.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressFamily</maml:name><maml:description><maml:para>Specifies an address family of IP addresses.The acceptable values for this parameter are: -- IPv4 -- IPv6</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressFamily</command:parameterValue></command:parameter></command:syntaxItem></command:syntax><command:parameters><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressFamily</maml:name><maml:description><maml:para>Specifies an address family of IP addresses.The acceptable values for this parameter are: -- IPv4 -- IPv6</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressFamily</command:parameterValue><dev:type><maml:name>AddressFamily</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue><dev:type><maml:name>CimSession[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Force</maml:name><maml:description><maml:para>Indicates that the cmdlet overwrites a CSV file that has the same name that you specify for the Path parameter.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies an IPv4 or IPv6 network prefix, in Classless InterDomain Routing (CIDR) notation. This parameter specifies the IP subnet of the IP address range for which to import the addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">VirtualizationType</command:parameterValue><dev:type><maml:name>VirtualizationType</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Path</maml:name><maml:description><maml:para>Specifies the absolute path of the exported CSV file.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue><dev:type><maml:name>Int32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter></command:parameters><command:inputTypes><command:inputType><dev:type><maml:name>None</maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description><maml:para></maml:para></maml:description></command:inputType></command:inputTypes><command:returnValues><command:returnValue><dev:type><maml:name>Microsoft.Windows.Ipam.Commands.IpamIPAddressPSObject[]</maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description><maml:para>This array of objects contains IPAM IP addresses.</maml:para></maml:description></command:returnValue></command:returnValues><command:terminatingErrors /><command:nonTerminatingErrors /><command:examples><command:example><maml:title>Example 1: Export all IPv4 addresses</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Export-IpamAddress -AddressFamily IPv4 -Path "C:\Addresses_v4.csv" </dev:code><dev:remarks><maml:para>This command exports all the IPv4 addresses in the IPAM server to the specified path.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 2: Export all IPv6 addresses</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Export-IpamAddress -AddressFamily IPv6 -Path "C:\addresses_v6.csv" -Force </dev:code><dev:remarks><maml:para>This command exports all the IPv6 addresses in IPAM to the specified path. The command overwrites the file without prompting the user if it already exists.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 3: Output all IPv4 addresses</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Export-IpamAddress -AddressFamily IPv4 -PassThru IPAddress IPAddressState AssignmentType ManagedByService ServiceInstance --------- -------------- -------------- ---------------- --------------- 172.22.2.15 In-Use Static IPAM Localhost 10.10.0.10 In-Use Static IPAM Localhost 172.17.14.15 Reserved Dynamic MS DHCP s2-infra.contoso.com 192.168.0.1 Reserved Dynamic MS DHCP s2-infra.contoso.com </dev:code><dev:remarks><maml:para>This command outputs all the IPv4 address objects in IPAM.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 4: Output all expired IPv4 addresses</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Export-IpamAddress -AddressFamily IPv4 -PassThru | Where-Object -FilterScript { $_.ExpiryStatus -Eq "Expired" } IPAddress IPAddressState AssignmentType ManagedByService ServiceInstance --------- -------------- -------------- ---------------- --------------- 10.155.155.155 In-Use Static IPAM Localhost </dev:code><dev:remarks><maml:para>This command filters and outputs all of the expired IPv4 address in IPAM.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 5: Export all expired IPv4 addresses</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Export-IpamAddress -AddressFamily IPv4 -PassThru | Where-Object -FilterScript { $_.ExpiryStatus -Eq "Expired" } | Export-Csv –Path "C:\expired.csv" </dev:code><dev:remarks><maml:para>This command filters and exports all the expired IPv4 addresses in IPAM to the specified path.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 6: Export and output all expired IPv4 addresses</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Export-IpamAddress -AddressFamily IPv4 -Path "C:\Addresses.csv" -PassThru IPAddress IPAddressState AssignmentType ManagedByService ServiceInstance --------- -------------- -------------- ---------------- --------------- 172.22.2.15 In-Use Static IPAM Localhost 10.10.0.10 In-Use Static IPAM Localhost 172.17.14.15 Reserved Dynamic MS DHCP s2-infra.contoso.com 192.168.0.1 Reserved Dynamic MS DHCP s2-infra.contoso.com </dev:code><dev:remarks><maml:para>This command exports all of the IPv4 Addresses in IPAM and outputs the exported addresses.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example></command:examples><maml:relatedLinks><maml:navigationLink><maml:linkText>Online Version:</maml:linkText><maml:uri>http://go.microsoft.com/fwlink/p/?LinkId=309403</maml:uri></maml:navigationLink><maml:navigationLink><maml:linkText>Import-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Add-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Get-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Set-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Remove-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Import-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink></maml:relatedLinks></command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"><command:details><command:name>Find-IpamFreeAddress</command:name><maml:description><maml:para>Gets one or more free IP addresses from a range of IP addresses in IPAM. </maml:para></maml:description><maml:copyright><maml:para /></maml:copyright><command:verb>Find</command:verb><command:noun>IpamFreeAddress</command:noun><dev:version /></command:details><maml:description><maml:para>The Find-IpamFreeAddress cmdlet gets one or more free IP addresses from a range of IP addresses in IP Address Management (IPAM). If you specify the NumAddress parameter, the cmdlet returns the requested number of free IPv4 addresses. If you do not specify the NumAddress parameter, the cmdlet returns a single free IP address. The maximum number of free IP addresses that the cmdlet returns is 1024. The cmdlet does not include exclusion address ranges, reservations, and assigned addresses among the free IP addresses. If the requested number of free IP addresses could not be found, a warning occurs. If you specify the TestReachability parameter, IPAM returns a ping status and a DNS record status for each of the IP address that it returns. </maml:para></maml:description><command:syntax><command:syntaxItem><maml:name>Find-IpamFreeAddress</maml:name><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="2" aliases=""><maml:name>InputObject</maml:name><maml:description><maml:para>Specifies the range from which to get one or more free IP addresses. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">CimInstance</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="3" aliases=""><maml:name>NumAddress</maml:name><maml:description><maml:para>Specifies the number of free addresses to get. A warning occurs if the number of free addresses returned is less than the number requested. If you do not specify this parameter, the cmdlet returns a single free address. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">UInt32</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>TestReachability</maml:name><maml:description><maml:para>Indicates that the cmdlet tests the reachability of the IP addresses.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter></command:syntaxItem></command:syntax><command:parameters><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue><dev:type><maml:name>CimSession[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="2" aliases=""><maml:name>InputObject</maml:name><maml:description><maml:para>Specifies the range from which to get one or more free IP addresses. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">CimInstance</command:parameterValue><dev:type><maml:name>CimInstance</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="3" aliases=""><maml:name>NumAddress</maml:name><maml:description><maml:para>Specifies the number of free addresses to get. A warning occurs if the number of free addresses returned is less than the number requested. If you do not specify this parameter, the cmdlet returns a single free address. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">UInt32</command:parameterValue><dev:type><maml:name>UInt32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>TestReachability</maml:name><maml:description><maml:para>Indicates that the cmdlet tests the reachability of the IP addresses.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue><dev:type><maml:name>Int32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter></command:parameters><command:inputTypes><command:inputType><dev:type><maml:name></maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description></maml:description></command:inputType></command:inputTypes><command:returnValues><command:returnValue><dev:type><maml:name>IpamFreeAddress</maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description><maml:para> Represents an unallocated IP address in IPAM server. Along with the IP address, the object also contains flags that specify whether IPAM server was able to ping the IP address and whether IPAM server found an associated DNS record. </maml:para></maml:description></command:returnValue></command:returnValues><command:terminatingErrors /><command:nonTerminatingErrors /><command:examples><command:example><maml:title>Example 1: Find a free IP address</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Get-IpamRange -StartIPAddress 10.12.3.1 -EndIPAddress 10.12.3.254 | Find-IpamFreeAddress IpAddress : 10.12.3.1 PingStatus : Undetected DnsRecordStatus : Undetected </dev:code><dev:remarks><maml:para>This command finds a free IP address from a range in IPAM. By default, IPAM does not test the reachability of the address or the existence of a corresponding DNS record.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 2: Find a free IP address and test the reachability of the address</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>$FreeIPs=Get-IpamRange -StartIPAddress 10.12.3.1 -EndIPAddress 10.12.3.254|Find-IpamFreeAddress -NumAddress 10 -TestReachability PS C:\>$FreeIPs[0] IpAddress : 10.12.3.1 PingStatus : NoReply DnsRecordStatus : NotFound </dev:code><dev:remarks><maml:para>This command finds 10 free IP address from a range in IPAM, and checks if the IP addresses are reachable and whether there is a corresponding DNS record.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example></command:examples><maml:relatedLinks><maml:navigationLink><maml:linkText>Online Version:</maml:linkText><maml:uri>http://go.microsoft.com/fwlink/?LinkID=309406</maml:uri></maml:navigationLink></maml:relatedLinks></command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"><command:details><command:name>Get-IpamAddress</command:name><maml:description><maml:para>Gets IP addresses from IPAM.</maml:para></maml:description><maml:copyright><maml:para /></maml:copyright><command:verb>Get</command:verb><command:noun>IpamAddress</command:noun><dev:version /></command:details><maml:description><maml:para>The Get-IpamAddress cmdlet gets IP addresses from IP Address Management (IPAM). Specify the IpAddress parameter to retrieve an IP address. Specify the AddressFamily parameter to retrieve a set of IP addresses for address families. You can also get addresses that belong to a range, a subnet, or an address block.</maml:para></maml:description><command:syntax><command:syntaxItem><maml:name>Get-IpamAddress</maml:name><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressCategory</maml:name><maml:description><maml:para>Specifies an array of IP address categories. If you specify this parameter, you must specify the AddressFamily parameter. The acceptable values for this parameter are: -- Public -- Private</maml:para></maml:description><command:parameterValue required="true" variableLength="true">AddressCategory[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies an array of names of address spaces. If you do not specify this parameter, the cmdlet gets the addresses for all address spaces in IPAM. If you specify this parameter, you must specify the AddressFamily parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies an array of names of the services that manage the IP addresses. The values that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.</maml:para><maml:para>You can use the Add-IpamCustomValue to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue to remove a value from the ManagedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies the network type of the address. The acceptable values for this parameter are: -- Provider -- Customer -- NonVirtualized The default value is NonVirtualized.</maml:para><maml:para>If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">VirtualizationType[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the service that you specified for the ManagedByService parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Unmapped</maml:name><maml:description><maml:para>Indicates that the cmdlet gets addresses that do not belong to any address families of IP addresses in IPAM.</maml:para></maml:description></command:parameter><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressFamily</maml:name><maml:description><maml:para>Specifies an array of address families of IP addresses. The acceptable values for this parameter are: -- IPv4 -- IPv6</maml:para></maml:description><command:parameterValue required="true" variableLength="true">AddressFamily[]</command:parameterValue></command:parameter></command:syntaxItem><command:syntaxItem><maml:name>Get-IpamAddress</maml:name><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="2" aliases=""><maml:name>IpAddress</maml:name><maml:description><maml:para>Specifies an array of IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">IPAddress[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies an array of names of address spaces. If you do not specify this parameter, the cmdlet gets the addresses for all address spaces in IPAM. If you specify this parameter, you must specify the AddressFamily parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies an array of names of the services that manage the IP addresses. The values that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.</maml:para><maml:para>You can use the Add-IpamCustomValue to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue to remove a value from the ManagedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies the network type of the address. The acceptable values for this parameter are: -- Provider -- Customer -- NonVirtualized The default value is NonVirtualized.</maml:para><maml:para>If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">VirtualizationType[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the service that you specified for the ManagedByService parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter></command:syntaxItem><command:syntaxItem><maml:name>Get-IpamAddress</maml:name><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>MappingToBlock</maml:name><maml:description><maml:para>Specifies an IP block. The cmdlet gets the addresses that belong to the IP block.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">CimInstance</command:parameterValue></command:parameter></command:syntaxItem><command:syntaxItem><maml:name>Get-IpamAddress</maml:name><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>MappingToSubnet</maml:name><maml:description><maml:para>Specifies an IP subnet. The cmdlet retrieves the addresses that belong to the IP subnet.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">CimInstance</command:parameterValue></command:parameter></command:syntaxItem><command:syntaxItem><maml:name>Get-IpamAddress</maml:name><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>MappingToRange</maml:name><maml:description><maml:para>Specifies an IP address range. The cmdlet retrieves the addresses that belong to the IP range.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">CimInstance</command:parameterValue></command:parameter></command:syntaxItem></command:syntax><command:parameters><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressCategory</maml:name><maml:description><maml:para>Specifies an array of IP address categories. If you specify this parameter, you must specify the AddressFamily parameter. The acceptable values for this parameter are: -- Public -- Private</maml:para></maml:description><command:parameterValue required="true" variableLength="true">AddressCategory[]</command:parameterValue><dev:type><maml:name>AddressCategory[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressFamily</maml:name><maml:description><maml:para>Specifies an array of address families of IP addresses. The acceptable values for this parameter are: -- IPv4 -- IPv6</maml:para></maml:description><command:parameterValue required="true" variableLength="true">AddressFamily[]</command:parameterValue><dev:type><maml:name>AddressFamily[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies an array of names of address spaces. If you do not specify this parameter, the cmdlet gets the addresses for all address spaces in IPAM. If you specify this parameter, you must specify the AddressFamily parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue><dev:type><maml:name>String[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue><dev:type><maml:name>CimSession[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="2" aliases=""><maml:name>IpAddress</maml:name><maml:description><maml:para>Specifies an array of IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">IPAddress[]</command:parameterValue><dev:type><maml:name>IPAddress[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies an array of names of the services that manage the IP addresses. The values that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.</maml:para><maml:para>You can use the Add-IpamCustomValue to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue to remove a value from the ManagedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue><dev:type><maml:name>String[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>MappingToBlock</maml:name><maml:description><maml:para>Specifies an IP block. The cmdlet gets the addresses that belong to the IP block.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">CimInstance</command:parameterValue><dev:type><maml:name>CimInstance</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>MappingToRange</maml:name><maml:description><maml:para>Specifies an IP address range. The cmdlet retrieves the addresses that belong to the IP range.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">CimInstance</command:parameterValue><dev:type><maml:name>CimInstance</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>MappingToSubnet</maml:name><maml:description><maml:para>Specifies an IP subnet. The cmdlet retrieves the addresses that belong to the IP subnet.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">CimInstance</command:parameterValue><dev:type><maml:name>CimInstance</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies the network type of the address. The acceptable values for this parameter are: -- Provider -- Customer -- NonVirtualized The default value is NonVirtualized.</maml:para><maml:para>If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">VirtualizationType[]</command:parameterValue><dev:type><maml:name>VirtualizationType[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the service that you specified for the ManagedByService parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue><dev:type><maml:name>String[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue><dev:type><maml:name>Int32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Unmapped</maml:name><maml:description><maml:para>Indicates that the cmdlet gets addresses that do not belong to any address families of IP addresses in IPAM.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter></command:parameters><command:inputTypes><command:inputType><dev:type><maml:name></maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description></maml:description></command:inputType></command:inputTypes><command:returnValues><command:returnValue><dev:type><maml:name>IpamAddress[]</maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description><maml:para> Represents a set of IP addresses on the IPAM server. </maml:para></maml:description></command:returnValue></command:returnValues><command:terminatingErrors /><command:nonTerminatingErrors /><command:examples><command:example><maml:title>Example 1: Get all private physical IPv4 addresses</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -AddressSpace "Default" </dev:code><dev:remarks><maml:para>This command gets all private physical IPv4 addresses in IPAM. Because the command specifies the Default address space, the command gets provider or non-virtualized IP addresses from all address spaces in IPAM.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 2: Get private IPv4 addresses for provider networks</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -NetworkType Provider </dev:code><dev:remarks><maml:para>This command gets all private IPv4 addresses for provider networks. Because the command does not specify the AddressSpace parameter, the command gets addresses that belong to all address spaces in IPAM.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 3: Get private IPv4 addresses from the default address space</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -NetworkType Provider -AddressSpace "Default" </dev:code><dev:remarks><maml:para>This command gets all private IPv4 addresses for provider networks. Because the command specifies the Default address space, the command gets IP addresses from all address spaces configured in IPAM.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 4: Get private IPv4 addresses for customer networks</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -NetworkType Customer </dev:code><dev:remarks><maml:para>This command gets all private IPv4 addresses for customer networks. Because the command does not specify the AddressSpace parameter, the command gets addresses that belong to all address spaces configured in IPAM.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 5: Get private IPv4 addresses for customer networks from an address space</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -NetworkType Customer -AddressSpace "ContosoAddSpace01" </dev:code><dev:remarks><maml:para>This command gets all private IPv4 addresses for customer networks that belong to the address space named ContosoAddSpace01.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 6: Get physical IP addresses from all address spaces</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Get-IpamAddress -IpAddress 10.12.1.1, 10.12.3.1 </dev:code><dev:remarks><maml:para>This command gets the physical IP addresses 10.12.1.1 and 10.12.3.1. Because the command does not specify the AddressSpace parameter, the command gets IP addresses from all address spaces which match the IP address 10.12.1.1 and 10.12.3.1.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 7: Get duplicate addresses in an address space</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Get-IpamAddress -AddressFamily IPv4 -AddressSpace Default | Where-Object {$_.duplicate -eq $true} | Format-List IPAddress, NetworkType, ManagedByService, ServiceInstance, ProviderAddressSpace IpAddress : 172.16.10.16 NetworkType : Provider ManagedByService : VMM ServiceInstance : vmm1.contoso.com ProviderAddressSpace : Default IpAddress : 172.16.10.16 NetworkType : Provider Duplicate : True ManagedByService : IPAM ServiceInstance : Localhost ProviderAddressSpace : Default </dev:code><dev:remarks><maml:para>This command gets all duplicate IPv4 addresses in the default provider address space. The Default address space is the address space to which the IPAM entity belongs. The command returns two addresses that have the address IP 172.16.10.16. One address is managed by IPAM and the other address is managed by System Center 2012 R2 Virtual Machine Manager. The IPAM server marks both these addresses as duplicate. The command uses the Format-List cmdlet to display the output in the form of a table. For more information, type Get-Help Format-Table.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 8: Get IP addresses that map to a subnet</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>$ContosoPhysicalSubnet = Get-IpamSubnet -NetworkId "10.12.0.0/16"PS C:\>Get-IpamAddress -MappingToSubnet $ContosoPhysicalSubnet </dev:code><dev:remarks><maml:para>This example gets all IP addresses that map to a subnet. Because the network type of the subnet is non-virtualized, the result contains only physical addresses and the fabric addresses from the default address space which belong to the subnet.</maml:para><maml:para>The first command uses the Get-IpamSubnet cmdlet to get the IpamSubnet object that contain subnets configured in IPAM for the network that has the ID 10.12.0.0/16. The command stores the object in the $ContosoPhysicalSubnet variable.</maml:para><maml:para>The second command gets all the IP addresses that belong to the IP subnet stored in the $ContosoPhysicalSubnet variable.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 9: Get all IP address that map to a an IP range</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>$Range = Get-IpamRange -StartIPAddress 10.12.1.1 -EndIPAddress 10.12.1.254 PS C:\>Get-IpamAddress -MappingToRange $Range </dev:code><dev:remarks><maml:para>This example gets all IP addresses that belong to a range of IP addresses.</maml:para><maml:para>The first command uses the Get-IpamRange cmdlet to get an IpamRange object that contains an IP range configured in IPAM. The command stores the object in the $Range variable.</maml:para><maml:para>The second command gets all the IP addresses that belong to the range stored in the $Range variable.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example></command:examples><maml:relatedLinks><maml:navigationLink><maml:linkText>Online Version:</maml:linkText><maml:uri>http://go.microsoft.com/fwlink/?LinkID=309407</maml:uri></maml:navigationLink><maml:navigationLink><maml:linkText>Set-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Add-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Remove-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Import-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Export-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink></maml:relatedLinks></command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"><command:details><command:name>Import-IpamAddress</command:name><maml:description><maml:para>Imports IP address into the IPAM server.</maml:para></maml:description><maml:copyright><maml:para /></maml:copyright><command:verb>Import</command:verb><command:noun>IpamAddress</command:noun><dev:version /></command:details><maml:description><maml:para>The Import-IpamAddress cmdlet imports IP addresses from a comma-separated values (CSV) file into the IP Address Management (IPAM) server.</maml:para><maml:para>The cmdlet supports two parameter sets. The Import parameter set adds IP address objects from the CSV file into the IPAM server and updates the existing address objects with updated information specified in the CSV file.</maml:para><maml:para>Use the InventoryImport parameter set to periodically import and update all of the IP address objects that map to the IP address range that you specify by using the unique combination of the NetworkId, ManagedByService, ServiceInstance, StartIPAddress, and EndIPAddress parameters. In addition to adding new addresses and changing existing addresses, this operation also removes the addresses which map to the IP address range that you specify but do not exist in the .csv file that you import. The import and update operations of IP addresses for an IP address range succeed only if the range exists the IPAM server.</maml:para><maml:para>The only field required in the CSV file that you import is the IP address. Other address-specific fields or custom fields can be specified in any order in the import CSV file. </maml:para><maml:para>The IPAM Windows PowerShell import supports both the English and server localized .csv files. The IPAM server uses the presence of the field name IPAddress in the CSV file to determine that the file must be processed in English format. If the field name IPAddress is not present in the CSV file, the CSV file is processed in the server localized format for the field names and enumeration values. The format of date and time values of the imported objects are interpreted in the localized format of the computer that runs the IPAM server and not in Coordinated Universal Time (UTC).</maml:para></maml:description><command:syntax><command:syntaxItem><maml:name>Import-IpamAddress</maml:name><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ErrorPath</maml:name><maml:description><maml:para>Specifies the literal path of the error CSV files that IPAM generates if one or more IP address records fail to import. </maml:para><maml:para>The file name is generated automatically by the computer that runs the IPAM server by prepending Error_ and appending the timestamp of the operation to the file name specified in the Path parameter. The default value of this parameter is the Documents folder of the user.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Force</maml:name><maml:description><maml:para>Forces the command to run without asking for user confirmation.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressFamily</maml:name><maml:description><maml:para>Specifies the address family of the IP address records in the import file. The IP address records in the CSV file must belong to the address family that you specify for this parameter. The acceptable values for this parameter are: -- IPv4 -- IPv6</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressFamily</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>Path</maml:name><maml:description><maml:para>Specifies the literal path and name of the CSV file to import.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description></command:parameter></command:syntaxItem><command:syntaxItem><maml:name>Import-IpamAddress</maml:name><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies the name of an address space. If you do not specify this parameter, the cmdlet imports the IP addresses into the Default address space. If you specify this parameter, you must specify the AddressFamily parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>EndIpAddress</maml:name><maml:description><maml:para>Specifies the end address for the IP address block. If you do not specify this parameter, the cmdlet uses the last IP address of the network that you specify for the NetworkId parameter. If you specify this parameter, you must specify the StartIPAddress parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">IPAddress</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ErrorPath</maml:name><maml:description><maml:para>Specifies the literal path of the error CSV files that IPAM generates if one or more IP address records fail to import. </maml:para><maml:para>The file name is generated automatically by the computer that runs the IPAM server by prepending Error_ and appending the timestamp of the operation to the file name specified in the Path parameter. The default value of this parameter is the Documents folder of the user.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Force</maml:name><maml:description><maml:para>Forces the command to run without asking for user confirmation.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies an IPv4 or IPv6 network prefix, in Classless InterDomain Routing (CIDR) notation. This parameter specifies the IP subnet of the IP address range for which to export the addresses.</maml:para><maml:para> Specify this parameter and the ManagedByService, ServiceInstance, StartIpAddress, and EndIpAddress parameters to uniquely identify an address range.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">VirtualizationType</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>StartIpAddress</maml:name><maml:description><maml:para>Specifies the start address for the IP address block. If you do not specify this parameter, the cmdlet uses the first address of the network that you specify for the NetworkId parameter. If you specify this parameter, you must specify the EndIPAddress parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">IPAddress</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressFamily</maml:name><maml:description><maml:para>Specifies the address family of the IP address records in the import file. The IP address records in the CSV file must belong to the address family that you specify for this parameter. The acceptable values for this parameter are: -- IPv4 -- IPv6</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressFamily</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies the value of the service that manages the IP address range for which you are importing and updating IP addresses. Specify this parameter and the ServiceInstance, NetworkId, StartIpAddress, and EndIpAddress parameters to uniquely identify a range.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkId</maml:name><maml:description><maml:para>Specifies an IPv4 or IPv6 network prefix, in Classless InterDomain Routing (CIDR) notation. This parameter specifies the IP subnet of the IP address range for which you import the addresses.</maml:para><maml:para> Specify this parameter and the ManagedByService, ServiceInstance, StartIpAddress, and EndIpAddress parameters to uniquely identify a range. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>Path</maml:name><maml:description><maml:para>Specifies the literal path and name of the CSV file to import.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies the value of the service instance of the IP address range for which you are importing and updating IP addresses. Specify this parameter and the ManagedByService, NetworkId, StartIpAddress, and EndIpAddress parameters to uniquely identify a range.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description></command:parameter></command:syntaxItem></command:syntax><command:parameters><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressFamily</maml:name><maml:description><maml:para>Specifies the address family of the IP address records in the import file. The IP address records in the CSV file must belong to the address family that you specify for this parameter. The acceptable values for this parameter are: -- IPv4 -- IPv6</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressFamily</command:parameterValue><dev:type><maml:name>AddressFamily</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies the name of an address space. If you do not specify this parameter, the cmdlet imports the IP addresses into the Default address space. If you specify this parameter, you must specify the AddressFamily parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue><dev:type><maml:name>CimSession[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>EndIpAddress</maml:name><maml:description><maml:para>Specifies the end address for the IP address block. If you do not specify this parameter, the cmdlet uses the last IP address of the network that you specify for the NetworkId parameter. If you specify this parameter, you must specify the StartIPAddress parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">IPAddress</command:parameterValue><dev:type><maml:name>IPAddress</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ErrorPath</maml:name><maml:description><maml:para>Specifies the literal path of the error CSV files that IPAM generates if one or more IP address records fail to import. </maml:para><maml:para>The file name is generated automatically by the computer that runs the IPAM server by prepending Error_ and appending the timestamp of the operation to the file name specified in the Path parameter. The default value of this parameter is the Documents folder of the user.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue>'Documents' folder of the user</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Force</maml:name><maml:description><maml:para>Forces the command to run without asking for user confirmation.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies the value of the service that manages the IP address range for which you are importing and updating IP addresses. Specify this parameter and the ServiceInstance, NetworkId, StartIpAddress, and EndIpAddress parameters to uniquely identify a range.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkId</maml:name><maml:description><maml:para>Specifies an IPv4 or IPv6 network prefix, in Classless InterDomain Routing (CIDR) notation. This parameter specifies the IP subnet of the IP address range for which you import the addresses.</maml:para><maml:para> Specify this parameter and the ManagedByService, ServiceInstance, StartIpAddress, and EndIpAddress parameters to uniquely identify a range. </maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies an IPv4 or IPv6 network prefix, in Classless InterDomain Routing (CIDR) notation. This parameter specifies the IP subnet of the IP address range for which to export the addresses.</maml:para><maml:para> Specify this parameter and the ManagedByService, ServiceInstance, StartIpAddress, and EndIpAddress parameters to uniquely identify an address range.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">VirtualizationType</command:parameterValue><dev:type><maml:name>VirtualizationType</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>Path</maml:name><maml:description><maml:para>Specifies the literal path and name of the CSV file to import.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies the value of the service instance of the IP address range for which you are importing and updating IP addresses. Specify this parameter and the ManagedByService, NetworkId, StartIpAddress, and EndIpAddress parameters to uniquely identify a range.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>StartIpAddress</maml:name><maml:description><maml:para>Specifies the start address for the IP address block. If you do not specify this parameter, the cmdlet uses the first address of the network that you specify for the NetworkId parameter. If you specify this parameter, you must specify the EndIPAddress parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">IPAddress</command:parameterValue><dev:type><maml:name>IPAddress</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue><dev:type><maml:name>Int32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue>false</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue>false</dev:defaultValue></command:parameter></command:parameters><command:inputTypes><command:inputType><dev:type><maml:name>None</maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description><maml:para></maml:para></maml:description></command:inputType></command:inputTypes><command:returnValues><command:returnValue><dev:type><maml:name>System.String</maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description><maml:para>A detailed summary of the steps that the cmdlet performed. The message is one of the following: Import of <AddressFamily> objects is complete. <y> out of <y> objects successfully imported. or Import of <AddressFamily> objects is complete. <x> out of <y> objects successfully imported. <z> out of <y> objects failed to get imported. Failures recorded in the file: <ErrorFilename></maml:para></maml:description></command:returnValue></command:returnValues><command:terminatingErrors /><command:nonTerminatingErrors /><command:examples><command:example><maml:title>Example 1: Import IPv4 addresses</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Import-IpamAddress -AddressFamily IPv4 -Path "C:\Addressv4.csv" -Force </dev:code><dev:remarks><maml:para>This command imports the IPv4 addresses from the file C:\Addressv4.csv into the IPAM server. The new addresses are added and existing addresses are edited. The errors, if any, are recorded in the Documents folder of the user in CSV file format. The command runs without user confirmation.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 2: Import IPv4 addresses and record errors</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Import-IpamAddress -AddressFamily IPv4 -Path "C:\addressv4.csv" -ErrorPath "C:\" -Force </dev:code><dev:remarks><maml:para>This command imports IPv4 addresses from the file C:\Addressv4.csv into the IPAM server. The command adds new addresses and modifies and existing addresses. The command records errors that occur during the import a CSV file at the path C:\. The command runs without user confirmation.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 3: Import and update IPv4 addresses in a range</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Import-IpamAddress -AddressFamily IPv4 -Path "C:\addressupdatev4.csv" -ManagedByService "IPAM" -ServiceInstance "Localhost" -NetworkId "10.10.10.0/24" Confirm Imports a csv file as an update of all IP address records that belong to the specified IP address range. Along with adding new addresses and editing existing addresses, this operation also deletes addresses belonging to the specified IP address range from IPAM database, that are not present in the csv file update being imported. Continue with this operation? [Y] Yes [N] No [?] Help :Y </dev:code><dev:remarks><maml:para>This command imports and updates all of the IPv4 addresses from the specified path that belong to the range specified by the network ID 10.10.10.0/24, the managing service IPAM, and the service instance Localhost. The cmdlet calculates the start IP address as 10.10.10.1 and the end IP address as 10.10.10.254. The cmdlet adds new addresses, changes existing addresses, and removes addresses that belong to the specified range which are not in the CSV file. By default, host IDs that contain all zeros (0) and all ones (1) are skipped for IPv4 address ranges while calculating the starting and ending IP address.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 4: Import and update IPv4 addresses that have a start and end address</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Import-IpamAddress -AddressFamily IPv4 -Path "C:\Addressupdatev4.csv" -ManagedByService "IPAM" -ServiceInstance "Localhost" -NetworkId "10.10.10.0/24" -StartIpAddress 10.10.10.1 -EndIpAddress 10.10.10.50 -Force </dev:code><dev:remarks><maml:para>This command imports and updates all of the IPv4 addresses from the file C:\Addressupdatev4.csv that belong to the range specified by the network ID 10.10.10.0/24, the start IP address 10.10.10.1, the end IP address 10.10.10.50, the managing service IPAM, and the service instance Localhost. The command adds new addresses, changes existing addresses, and removes addresses that belong to the specified range which are not in the CSV file. The command records errors that occur in CSV file in the Documents folder of the user.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example></command:examples><maml:relatedLinks><maml:navigationLink><maml:linkText>Online Version:</maml:linkText><maml:uri>http://go.microsoft.com/fwlink/p/?LinkId=309423</maml:uri></maml:navigationLink><maml:navigationLink><maml:linkText>Export-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink></maml:relatedLinks></command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"><command:details><command:name>Remove-IpamAddress</command:name><maml:description><maml:para>Removes a set of addresses from IPAM.</maml:para></maml:description><maml:copyright><maml:para /></maml:copyright><command:verb>Remove</command:verb><command:noun>IpamAddress</command:noun><dev:version /></command:details><maml:description><maml:para>The Remove-IpamAddress cmdlet removes a set of addresses from IP Address Management (IPAM). The cmdlet removes the specified IP address records permanently from the IPAM database. Specify the IP addresses to remove or use the InputObject parameter to specify an IpamAddress object to remove.</maml:para><maml:para>The cmdlet does not remove any reservations on the Dynamic Host Configuration Protocol (DHCP) server or Domain Name System (DNS) records. You can use Windows PowerShell for DHCP Server to remove a reservation from the DCHP server. You can use Windows PowerShell for DNS to remove the DNS records associated with the IP addresses that you remove.</maml:para></maml:description><command:syntax><command:syntaxItem><maml:name>Remove-IpamAddress</maml:name><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="2" aliases=""><maml:name>IpAddress</maml:name><maml:description><maml:para>Specifies an array of IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">IPAddress[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="3" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies an array of services that manage the IP addresses that you specify in the IpAddress parameter. If you specify this parameter, you must specify the IpAddress parameter.</maml:para><maml:para>The values that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="4" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the services that you specified for the ManagedByService parameter. If you specify this parameter, you must specify the IpAddress parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies an array of address spaces. The cmdlet removes the addresses that belong to the address spaces that you specify. If you specify this parameter, you must specify the IpAddress parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Force</maml:name><maml:description><maml:para>Forces the command to run without asking for user confirmation.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies the network type of the address. The acceptable values for this parameter are: -- Provider -- Customer -- NonVirtualized The default value is NonVirtualized.</maml:para><maml:para>If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">VirtualizationType[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description></command:parameter></command:syntaxItem><command:syntaxItem><maml:name>Remove-IpamAddress</maml:name><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Force</maml:name><maml:description><maml:para>Forces the command to run without asking for user confirmation.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>InputObject</maml:name><maml:description><maml:para>Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimInstance[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description></command:parameter></command:syntaxItem></command:syntax><command:parameters><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies an array of address spaces. The cmdlet removes the addresses that belong to the address spaces that you specify. If you specify this parameter, you must specify the IpAddress parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue><dev:type><maml:name>String[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue><dev:type><maml:name>CimSession[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>Force</maml:name><maml:description><maml:para>Forces the command to run without asking for user confirmation.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>InputObject</maml:name><maml:description><maml:para>Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimInstance[]</command:parameterValue><dev:type><maml:name>CimInstance[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="2" aliases=""><maml:name>IpAddress</maml:name><maml:description><maml:para>Specifies an array of IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">IPAddress[]</command:parameterValue><dev:type><maml:name>IPAddress[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="3" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies an array of services that manage the IP addresses that you specify in the IpAddress parameter. If you specify this parameter, you must specify the IpAddress parameter.</maml:para><maml:para>The values that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue><dev:type><maml:name>String[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies the network type of the address. The acceptable values for this parameter are: -- Provider -- Customer -- NonVirtualized The default value is NonVirtualized.</maml:para><maml:para>If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">VirtualizationType[]</command:parameterValue><dev:type><maml:name>VirtualizationType[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="4" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the services that you specified for the ManagedByService parameter. If you specify this parameter, you must specify the IpAddress parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue><dev:type><maml:name>String[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue><dev:type><maml:name>Int32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue>false</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue>false</dev:defaultValue></command:parameter></command:parameters><command:inputTypes><command:inputType><dev:type><maml:name></maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description></maml:description></command:inputType></command:inputTypes><command:returnValues><command:returnValue><dev:type><maml:name>IpamAddress</maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description><maml:para> Represents an IP address on the IPAM server. </maml:para></maml:description></command:returnValue></command:returnValues><command:terminatingErrors /><command:nonTerminatingErrors /><command:examples><command:example><maml:title>Example 1: Remove all IP addresses in range</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> $Range = Get-IpamRange -StartIPAddress 10.12.3.1 -EndIPAddress 10.12.3.254PS C:\>Get-IpamAddress -MappingToRange $Range | Remove-IpamAddress Confirm Deleting the given IP Address from IPAM database. You will not be able to undo this action. Do you want to continue? [Y] Yes [N] No [S] Suspend [?] Help (default is "Y"): </dev:code><dev:remarks><maml:para>This example removes all IP addresses in a range.</maml:para><maml:para>The first command uses the Get-IpamRange cmdlet to get an IpamRange object that contains the addresses that belong to a range of IP addresses. The command stores the object in the $Range variable.</maml:para><maml:para>The second command uses the Get-IpamAddress cmdlet to get an IpamAddress object that contains the IP addresses that map to the range stored in the $Range variable. The command passes the IpamAddress object to the Remove-IpamAddress cmdlet by using the pipeline operator. The command removes the addresses in the range stored in the $Range variable.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 2: Remove all expired physical addresses managed by IPAM</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -ManagedByService IPAM | Where-Object {$_.ExpiryStatus -eq "Expired"} | Remove-IpamAddress </dev:code><dev:remarks><maml:para>This command gets an IpamAddress object that contains the physical addresses managed by IPAM that have expired. The command passes the IpamAddress object to the Remove-IpamAddress cmdlet by using the pipeline operator. The Remove-IpamAddress cmdlet removes the IpamAddress object.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 3: Remove a customer IP address</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Remove-IpamAddress -IpAddress 172.16.10.16 -AddressSpace "Default" </dev:code><dev:remarks><maml:para>This command removes the customer IP address 172.16.10.16 from the default address space.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 4: Remove a provider IP address</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Remove-IpamAddress -IpAddress 172.16.10.19 -AddressSpace "Default" -NetworkType Provider </dev:code><dev:remarks><maml:para>This command removes the provider IP address 172.16.10.19 from the default address space.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example></command:examples><maml:relatedLinks><maml:navigationLink><maml:linkText>Online Version:</maml:linkText><maml:uri>http://go.microsoft.com/fwlink/?LinkID=309429</maml:uri></maml:navigationLink><maml:navigationLink><maml:linkText>Get-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Add-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Set-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Import-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Export-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Get-IpamAddressSpace</maml:linkText><maml:uri /></maml:navigationLink></maml:relatedLinks></command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:MSHelp="http://msdn.microsoft.com/mshelp"><command:details><command:name>Set-IpamAddress</command:name><maml:description><maml:para>Modifies an IP address in IPAM.</maml:para></maml:description><maml:copyright><maml:para /></maml:copyright><command:verb>Set</command:verb><command:noun>IpamAddress</command:noun><dev:version /></command:details><maml:description><maml:para>The Set-IpamAddress cmdlet modifies an IP address in IP Address Management (IPAM). Specify the IP addresses to modify or use the InputObject parameter to specify an IpamAddress object to modify.</maml:para><maml:para>You can use the cmdlet to associate the Dynamic Host Configuration Protocol (DHCP) reservation properties with the IP address. The cmdlet does not create a reservation on the DCHP server. You can use Windows PowerShell for DHCP Server to create a reservation on the DCHP server.</maml:para></maml:description><command:syntax><command:syntaxItem><maml:name>Set-IpamAddress</maml:name><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="2" aliases=""><maml:name>IpAddress</maml:name><maml:description><maml:para>Specifies an array of IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">IPAddress[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="3" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies the name of the service that manages the IP address. The value that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM. </maml:para><maml:para>You can use the Add-IpamCustomValue cmdlet to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue cmdlet to remove a value from the ManagedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="4" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the services that you specified for the ManagedByService parameter. If you specify this parameter, you must specify the IpAddress parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddCustomConfiguration</maml:name><maml:description><maml:para>Specifies semi-colon separated name/value pairs of custom metadata. The cmdlet adds the custom configuration metadata to the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies the address space that is associated with the IP address. The default value is Default.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssetTag</maml:name><maml:description><maml:para>Specifies the asset tag associated with the IP address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentDate</maml:name><maml:description><maml:para>Specifies the date on which you assigned the IP address to a device.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentType</maml:name><maml:description><maml:para>Specifies how IPAM assigns the addresses. The default value is Static. The acceptable values for this parameter are: -- Static -- Dynamic -- Auto -- VIP -- Reserved</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressAssignment</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ClientId</maml:name><maml:description><maml:para>Specifies the ID of the IPAM client.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Description</maml:name><maml:description><maml:para>Specifies a description of the IP address assignment for a device.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceName</maml:name><maml:description><maml:para>Specifies the name of the device to which you assigned the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceType</maml:name><maml:description><maml:para>Specifies the type of device to which you assigned the address. Specify a value that exists in the built-in custom field DeviceType. The acceptable values for this parameter are: -- VM -- Host The default value is Host.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Duid</maml:name><maml:description><maml:para>Specifies the DHCP device unique identifier (DUID) for the client. Clients use the DUID to get an IP address from a DHCPv6 server.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ExpiryDate</maml:name><maml:description><maml:para>Specifies an expiry date for the address. IPAM alerts the administrator when the IP address expires. IPAM does not reclaim expired addresses automatically.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ForwardLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the name of the DNS server that IPAM uses to resolve host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ForwardLookupZone</maml:name><maml:description><maml:para>Specifies the name of the forward look up zone that contains mapping of host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Iaid</maml:name><maml:description><maml:para>Specifies the identity association ID (IAID) of an IPv6 address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">UInt32</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>IpAddressState</maml:name><maml:description><maml:para>Specifies the usage state of the IP address. By default, the cmdlet sets the address as In-Use. </maml:para><maml:para>You can specify a valid custom value for this parameter. Use the Add-IpamCustomValue cmdlet to add a custom value to a custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>MacAddress</maml:name><maml:description><maml:para>Specifies the media access control (MAC) address of the device to which the address is assigned.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies the network type of the address. The acceptable values for this parameter are: -- Provider -- Customer -- NonVirtualized The default value is NonVirtualized.</maml:para><maml:para>If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">VirtualizationType[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewAddressSpace</maml:name><maml:description><maml:para>Specifies the name of the new address space for the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewIPAddress</maml:name><maml:description><maml:para>Specifies an IP address. The cmdlet assigns the new IP address to the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">IPAddress</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewManagedByService</maml:name><maml:description><maml:para>Specifies a new value for the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the MangedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewNetworkType</maml:name><maml:description><maml:para>Specifies a new value for network type for the IP addresses. You can change the network type from NonVirtualized to Provider, and from Provider to NonVirtualized. You cannot be change the network type from NonVirtualized or Provider to Customer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">VirtualizationType</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewServiceInstance</maml:name><maml:description><maml:para>Specifies a new value for the instance of the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Owner</maml:name><maml:description><maml:para>Specifies the name of the owner of the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>RemoveCustomConfiguration</maml:name><maml:description><maml:para>Specifies a semi-colon separated string of custom field names. The cmdlet removes the custom field names from the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationDescription</maml:name><maml:description><maml:para>Specifies a description for the DCHP reservation.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationName</maml:name><maml:description><maml:para>Specifies the name of the reservation on the DHCP server for the device. You must specify a value for this parameter if you specify the ReservationServer parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationServer</maml:name><maml:description><maml:para>Specifies the DHCP server on which the reservation is assigned. The cmdlet stores the reservation data in IPAM. The cmdlet does not create a reservation on the DHCP server.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationType</maml:name><maml:description><maml:para>Specifies the protocols supported by the reservation. You must specify a value for this parameter if you specify the ReservationServer parameter. The acceptable values for this parameter are: -- DHCP -- BootPr -- DHCP and BootPr</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DhcpReservationType</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReverseLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the DNS server that IPAM uses to resolve IP addresses to host names.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReverseLookupZone</maml:name><maml:description><maml:para>Specifies the reverse lookup zone that contains mapping from IP addresses to fully qualified domain names (FQDN).</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>SerialNumber</maml:name><maml:description><maml:para>Specifies the serial number of the device to which you assigned the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description></command:parameter></command:syntaxItem><command:syntaxItem><maml:name>Set-IpamAddress</maml:name><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddCustomConfiguration</maml:name><maml:description><maml:para>Specifies semi-colon separated name/value pairs of custom metadata. The cmdlet adds the custom configuration metadata to the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssetTag</maml:name><maml:description><maml:para>Specifies the asset tag associated with the IP address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentDate</maml:name><maml:description><maml:para>Specifies the date on which you assigned the IP address to a device.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentType</maml:name><maml:description><maml:para>Specifies how IPAM assigns the addresses. The default value is Static. The acceptable values for this parameter are: -- Static -- Dynamic -- Auto -- VIP -- Reserved</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressAssignment</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ClientId</maml:name><maml:description><maml:para>Specifies the ID of the IPAM client.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Description</maml:name><maml:description><maml:para>Specifies a description of the IP address assignment for a device.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceName</maml:name><maml:description><maml:para>Specifies the name of the device to which you assigned the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceType</maml:name><maml:description><maml:para>Specifies the type of device to which you assigned the address. Specify a value that exists in the built-in custom field DeviceType. The acceptable values for this parameter are: -- VM -- Host The default value is Host.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Duid</maml:name><maml:description><maml:para>Specifies the DHCP device unique identifier (DUID) for the client. Clients use the DUID to get an IP address from a DHCPv6 server.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ExpiryDate</maml:name><maml:description><maml:para>Specifies an expiry date for the address. IPAM alerts the administrator when the IP address expires. IPAM does not reclaim expired addresses automatically.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ForwardLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the name of the DNS server that IPAM uses to resolve host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ForwardLookupZone</maml:name><maml:description><maml:para>Specifies the name of the forward look up zone that contains mapping of host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Iaid</maml:name><maml:description><maml:para>Specifies the identity association ID (IAID) of an IPv6 address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">UInt32</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>IpAddressState</maml:name><maml:description><maml:para>Specifies the usage state of the IP address. By default, the cmdlet sets the address as In-Use. </maml:para><maml:para>You can specify a valid custom value for this parameter. Use the Add-IpamCustomValue cmdlet to add a custom value to a custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>MacAddress</maml:name><maml:description><maml:para>Specifies the media access control (MAC) address of the device to which the address is assigned.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewAddressSpace</maml:name><maml:description><maml:para>Specifies the name of the new address space for the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewIPAddress</maml:name><maml:description><maml:para>Specifies an IP address. The cmdlet assigns the new IP address to the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">IPAddress</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewManagedByService</maml:name><maml:description><maml:para>Specifies a new value for the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the MangedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewNetworkType</maml:name><maml:description><maml:para>Specifies a new value for network type for the IP addresses. You can change the network type from NonVirtualized to Provider, and from Provider to NonVirtualized. You cannot be change the network type from NonVirtualized or Provider to Customer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">VirtualizationType</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewServiceInstance</maml:name><maml:description><maml:para>Specifies a new value for the instance of the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Owner</maml:name><maml:description><maml:para>Specifies the name of the owner of the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>RemoveCustomConfiguration</maml:name><maml:description><maml:para>Specifies a semi-colon separated string of custom field names. The cmdlet removes the custom field names from the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationDescription</maml:name><maml:description><maml:para>Specifies a description for the DCHP reservation.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationName</maml:name><maml:description><maml:para>Specifies the name of the reservation on the DHCP server for the device. You must specify a value for this parameter if you specify the ReservationServer parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationServer</maml:name><maml:description><maml:para>Specifies the DHCP server on which the reservation is assigned. The cmdlet stores the reservation data in IPAM. The cmdlet does not create a reservation on the DHCP server.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationType</maml:name><maml:description><maml:para>Specifies the protocols supported by the reservation. You must specify a value for this parameter if you specify the ReservationServer parameter. The acceptable values for this parameter are: -- DHCP -- BootPr -- DHCP and BootPr</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DhcpReservationType</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReverseLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the DNS server that IPAM uses to resolve IP addresses to host names.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReverseLookupZone</maml:name><maml:description><maml:para>Specifies the reverse lookup zone that contains mapping from IP addresses to fully qualified domain names (FQDN).</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>SerialNumber</maml:name><maml:description><maml:para>Specifies the serial number of the device to which you assigned the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue></command:parameter><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>InputObject</maml:name><maml:description><maml:para>Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimInstance[]</command:parameterValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description></command:parameter></command:syntaxItem></command:syntax><command:parameters><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddCustomConfiguration</maml:name><maml:description><maml:para>Specifies semi-colon separated name/value pairs of custom metadata. The cmdlet adds the custom configuration metadata to the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AddressSpace</maml:name><maml:description><maml:para>Specifies the address space that is associated with the IP address. The default value is Default.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue><dev:type><maml:name>String[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>AsJob</maml:name><maml:description><maml:para>Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the <maml:navigationLink><maml:linkText>Receive-Job</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. For more information about Windows PowerShell® background jobs, see <maml:navigationLink><maml:linkText>about_Jobs</maml:linkText><maml:uri></maml:uri></maml:navigationLink>.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssetTag</maml:name><maml:description><maml:para>Specifies the asset tag associated with the IP address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentDate</maml:name><maml:description><maml:para>Specifies the date on which you assigned the IP address to a device.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue><dev:type><maml:name>DateTime</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>AssignmentType</maml:name><maml:description><maml:para>Specifies how IPAM assigns the addresses. The default value is Static. The acceptable values for this parameter are: -- Static -- Dynamic -- Auto -- VIP -- Reserved</maml:para></maml:description><command:parameterValue required="true" variableLength="false">AddressAssignment</command:parameterValue><dev:type><maml:name>AddressAssignment</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named" aliases="Session"><maml:name>CimSession</maml:name><maml:description><maml:para>Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a <maml:navigationLink><maml:linkText>New-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> or <maml:navigationLink><maml:linkText>Get-CimSession</maml:linkText><maml:uri></maml:uri></maml:navigationLink> cmdlet. The default is the current session on the local computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimSession[]</command:parameterValue><dev:type><maml:name>CimSession[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ClientId</maml:name><maml:description><maml:para>Specifies the ID of the IPAM client.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Description</maml:name><maml:description><maml:para>Specifies a description of the IP address assignment for a device.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceName</maml:name><maml:description><maml:para>Specifies the name of the device to which you assigned the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>DeviceType</maml:name><maml:description><maml:para>Specifies the type of device to which you assigned the address. Specify a value that exists in the built-in custom field DeviceType. The acceptable values for this parameter are: -- VM -- Host The default value is Host.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Duid</maml:name><maml:description><maml:para>Specifies the DHCP device unique identifier (DUID) for the client. Clients use the DUID to get an IP address from a DHCPv6 server.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ExpiryDate</maml:name><maml:description><maml:para>Specifies an expiry date for the address. IPAM alerts the administrator when the IP address expires. IPAM does not reclaim expired addresses automatically.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DateTime</command:parameterValue><dev:type><maml:name>DateTime</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ForwardLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the name of the DNS server that IPAM uses to resolve host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ForwardLookupZone</maml:name><maml:description><maml:para>Specifies the name of the forward look up zone that contains mapping of host names to IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Iaid</maml:name><maml:description><maml:para>Specifies the identity association ID (IAID) of an IPv6 address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">UInt32</command:parameterValue><dev:type><maml:name>UInt32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByValue)" position="named" aliases=""><maml:name>InputObject</maml:name><maml:description><maml:para>Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">CimInstance[]</command:parameterValue><dev:type><maml:name>CimInstance[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="true" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="2" aliases=""><maml:name>IpAddress</maml:name><maml:description><maml:para>Specifies an array of IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">IPAddress[]</command:parameterValue><dev:type><maml:name>IPAddress[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>IpAddressState</maml:name><maml:description><maml:para>Specifies the usage state of the IP address. By default, the cmdlet sets the address as In-Use. </maml:para><maml:para>You can specify a valid custom value for this parameter. Use the Add-IpamCustomValue cmdlet to add a custom value to a custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>MacAddress</maml:name><maml:description><maml:para>Specifies the media access control (MAC) address of the device to which the address is assigned.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="3" aliases="MB"><maml:name>ManagedByService</maml:name><maml:description><maml:para>Specifies the name of the service that manages the IP address. The value that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM. </maml:para><maml:para>You can use the Add-IpamCustomValue cmdlet to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue cmdlet to remove a value from the ManagedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue><dev:type><maml:name>String[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NetworkType</maml:name><maml:description><maml:para>Specifies the network type of the address. The acceptable values for this parameter are: -- Provider -- Customer -- NonVirtualized The default value is NonVirtualized.</maml:para><maml:para>If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">VirtualizationType[]</command:parameterValue><dev:type><maml:name>VirtualizationType[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewAddressSpace</maml:name><maml:description><maml:para>Specifies the name of the new address space for the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewIPAddress</maml:name><maml:description><maml:para>Specifies an IP address. The cmdlet assigns the new IP address to the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">IPAddress</command:parameterValue><dev:type><maml:name>IPAddress</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewManagedByService</maml:name><maml:description><maml:para>Specifies a new value for the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the MangedByService custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewNetworkType</maml:name><maml:description><maml:para>Specifies a new value for network type for the IP addresses. You can change the network type from NonVirtualized to Provider, and from Provider to NonVirtualized. You cannot be change the network type from NonVirtualized or Provider to Customer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">VirtualizationType</command:parameterValue><dev:type><maml:name>VirtualizationType</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>NewServiceInstance</maml:name><maml:description><maml:para>Specifies a new value for the instance of the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>Owner</maml:name><maml:description><maml:para>Specifies the name of the owner of the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>PassThru</maml:name><maml:description><maml:para>Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>RemoveCustomConfiguration</maml:name><maml:description><maml:para>Specifies a semi-colon separated string of custom field names. The cmdlet removes the custom field names from the IP addresses.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationDescription</maml:name><maml:description><maml:para>Specifies a description for the DCHP reservation.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationName</maml:name><maml:description><maml:para>Specifies the name of the reservation on the DHCP server for the device. You must specify a value for this parameter if you specify the ReservationServer parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationServer</maml:name><maml:description><maml:para>Specifies the DHCP server on which the reservation is assigned. The cmdlet stores the reservation data in IPAM. The cmdlet does not create a reservation on the DHCP server.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReservationType</maml:name><maml:description><maml:para>Specifies the protocols supported by the reservation. You must specify a value for this parameter if you specify the ReservationServer parameter. The acceptable values for this parameter are: -- DHCP -- BootPr -- DHCP and BootPr</maml:para></maml:description><command:parameterValue required="true" variableLength="false">DhcpReservationType</command:parameterValue><dev:type><maml:name>DhcpReservationType</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReverseLookupPrimaryServer</maml:name><maml:description><maml:para>Specifies the DNS server that IPAM uses to resolve IP addresses to host names.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>ReverseLookupZone</maml:name><maml:description><maml:para>Specifies the reverse lookup zone that contains mapping from IP addresses to fully qualified domain names (FQDN).</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="named" aliases=""><maml:name>SerialNumber</maml:name><maml:description><maml:para>Specifies the serial number of the device to which you assigned the address.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">String</command:parameterValue><dev:type><maml:name>String</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="True (ByPropertyName)" position="4" aliases="SI"><maml:name>ServiceInstance</maml:name><maml:description><maml:para>Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the services that you specified for the ManagedByService parameter. If you specify this parameter, you must specify the IpAddress parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance parameter.</maml:para></maml:description><command:parameterValue required="true" variableLength="true">String[]</command:parameterValue><dev:type><maml:name>String[]</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named" aliases=""><maml:name>ThrottleLimit</maml:name><maml:description><maml:para>Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.</maml:para></maml:description><command:parameterValue required="true" variableLength="false">Int32</command:parameterValue><dev:type><maml:name>Int32</maml:name><maml:uri /></dev:type><dev:defaultValue></dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>Confirm</maml:name><maml:description><maml:para>Prompts you for confirmation before running the cmdlet.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue>false</dev:defaultValue></command:parameter><command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"><maml:name>WhatIf</maml:name><maml:description><maml:para>Shows what would happen if the cmdlet runs. The cmdlet is not run.</maml:para></maml:description><command:parameterValue required="false" variableLength="false">SwitchParameter</command:parameterValue><dev:type><maml:name>SwitchParameter</maml:name><maml:uri /></dev:type><dev:defaultValue>false</dev:defaultValue></command:parameter></command:parameters><command:inputTypes><command:inputType><dev:type><maml:name></maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description></maml:description></command:inputType></command:inputTypes><command:returnValues><command:returnValue><dev:type><maml:name>IpamAddress</maml:name><maml:uri></maml:uri><maml:description><maml:para /></maml:description></dev:type><maml:description><maml:para> Represents an IP Address on the IPAM server. </maml:para></maml:description></command:returnValue></command:returnValues><command:terminatingErrors /><command:nonTerminatingErrors /><command:examples><command:example><maml:title>Example 1: Reassign an IP address</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\> Get-IpamAddress -IpAddress 172.16.10.10 | Set-IpamAddress -NewManagedByService "VMM" -NewServiceInstance "vmm1.contoso.com" -DeviceType "VM" -PassThru IpAddress : 172.16.10.10 NetworkType : NonVirtualized Duplicate : False ExpiryStatus : Static MacAddress : ManagedByService : VMM ServiceInstance : vmm1.contoso.com DeviceName : DeviceType : VM IpAddressState : In-Use AssignmentType : Static </dev:code><dev:remarks><maml:para>This command gets an IpamAddress object that contains the IP address 172.16.10.10 that is managed by IPAM. The command passes the IpamAddress object to the Set-IpamAddress cmdlet by using the pipeline operator. The Set-IpamAddress cmdlet changes the service that manages the IP address to VMM, and changes the instance of the service that manages the IP address to vmm1.contoso.com. The command assigns the address to the VM device type.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 2: Add custom metadata to an IP address</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Get-IpamAddress -IpAddress 172.16.10.10 | Set-IpamAddress -AddCustomConfiguration "ADSite=Main" </dev:code><dev:remarks><maml:para>This command adds custom metadata to the IP address 172.16.10.10. The command adds the value Main to the custom field named ADSite. </maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 3: Convert the network type of an IP address from non-virtualized to provider</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Set-IpamAddress -IpAddress 172.16.10.10 -AddressSpace "Default" -NetworkType NonVirtualized -NewNetworkType Provider IpAddress : 172.16.10.10 NetworkType : Provider Duplicate : False ExpiryStatus : Static MacAddress : ManagedByService : VMM ServiceInstance : vmm1.contoso.com DeviceName : DeviceType : Host IpAddressState : In-Use AssignmentType : Static </dev:code><dev:remarks><maml:para>This command converts the network type of the IP address 172.16.10.10 from non-virtualized to provider. The command assigns the provider address to the default provider address space.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 4: Convert the network type of an IP address from provider to non-virtualized</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Set-IpamAddress -IpAddress 172.16.10.10 -NetworkType Provider -NewNetworkType NonVirtualized -PassThru | Format-List IpAddress, NetworkType, ProviderAddressSpace, CustomerAddressSpace IpAddress : 172.16.10.10 NetworkType : NonVirtualized ProviderAddressSpace : Default CustomerAddressSpace : </dev:code><dev:remarks><maml:para>This command converts the network type of the IP address 172.16.10.10 from provider to non-virtualized. By default, the command assigns the non-virtualized address to the Default address space. The command passes the output to the Format-List cmdlet by using the pipeline operator, and formats the output as a table. For more information, type Get-Help Format-List.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example><command:example><maml:title>Example 5: Assign an IP address to a new address space</maml:title><maml:introduction><maml:para></maml:para></maml:introduction><dev:code>PS C:\>Set-IpamAddress -IpAddress 172.16.10.10 -NetworkType NonVirtualized -NewNetworkType Provider -NewAddressSpace MainDataCenter -PassThru | Format-List IpAddress, NetworkType, ProviderAddressSpace, CustomerAddressSpace IpAddress : 172.16.10.10 NetworkType : Provider ProviderAddressSpace : MainDataCenter CustomerAddressSpace : </dev:code><dev:remarks><maml:para>This command converts the network type of the IP address 172.16.10.10 from non-virtualized to provider. The command assigns the IP address to the provider address space named MainDataCenter. The command passes the output to the Format-List cmdlet by using the pipeline operator, and formats the output as a table.</maml:para></dev:remarks><command:commandLines><command:commandLine><command:commandText /></command:commandLine></command:commandLines></command:example></command:examples><maml:relatedLinks><maml:navigationLink><maml:linkText>Online Version:</maml:linkText><maml:uri>http://go.microsoft.com/fwlink/?LinkID=309444</maml:uri></maml:navigationLink><maml:navigationLink><maml:linkText>Get-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Add-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Remove-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Import-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink><maml:navigationLink><maml:linkText>Export-IpamAddress</maml:linkText><maml:uri /></maml:navigationLink></maml:relatedLinks></command:command> </helpItems> |