PublishPsGalleryModule.ps1
|
#requires -Modules PowerShellGet $ReleaseNotes =@' IPv6Regex Chris Warwick, @cjwarwickps, October 2015 This PowerShell script tests a number of regular expressions that match text representations of IPv6 addresses. The script also runs the sample test cases against the [System.Net.IpAddress]::TryParse() method to illustrate some subtle considerations with address validation. See the comments at the end of the script file for further detailed notes and references. Script Structure ---------------- This script is split into four sections: 1. The first section defines an IPv6 regex to the tested against a set of sample addresses. A number of other Regexs gathered from across the web are also defined here. 2. Following the regex definitions, an array of test script-blocks is defined. Each script block takes a test IPv6 address as a parameter and tests this address against a specific regex or against the IpAddress.TryParse() method. The script blocks return true if the address is considered valid by the test or false otherwise. 3. The next (largest) section of the script defines sample IPv6 addresses to be tested. There are a large number of both valid and invalid address representations defined. 4. The final section of the script runs the tests. Each test script block is selected in turn and the test addresses are matched against the script blocks. Each test returns a test result object containing details of the individual test. The tests are timed to allow comparison of the performance of each test method (use the -Verbose switch to view timings). **NOTE**: The output of this script is most useful as a consolidated report. Consequently, the script 'breaks the rules' somewhat by including output formatting. This behaviour can be changed by specifying the '-NoFormat' switch parameter to instruct the script to pass test-result objects to the output pipeline (these can then be formatted or collected as required). Results ------- Unsurprisingly, a number of regexs found on the web are invalid (only one is included here, others have been omitted). Beware of using random regexs without testing them. There are some subtleties with the operation of the IpAddress.TestParse() method: 1. The IpAddress.TryParse() methods allow leading zeroes in the IPv4 octets. This is actually explicitly invalid in the definition in rfc3986 (apparently some systems(?) use a leading zero to denote an Octal number in the IPv4 Octet). 2. The IpAddress::TryParse method does not accept leading elided-zeroes syntax: ('::....') if there is only one group (the first group) of the address mising - although this is valid according to the RFC. So, for example, ::2:3:4:5:6:7 is considered valid by IpAddress.TryParse(), but ::2:3:4:5:6:7:8 isn't 3. The IpAddress.TryParse() method by default accepts IPv4 addresses; these can be qualified by checking the address against the [System.Net.Sockets.AddressFamily]::InterNetworkV6 type Compiling regexs is an expensive operation, and even for the relatively large number of tests defined here it can be seen from the timing information that the investment is not warranted in this case. Although the IpAddress.TryParse() method has some idiosyncrasies it may be preferred to the regex matching methods given the complexity of these regexs (IpAddress.TryParse() is probably equally as complex but the at least the complexity is hidden :-) Sample Output ------------- **Note:** By default the script will only output results of failed tests (use the -NoFormat parameter to change this behaviour). ```` PS:\> .\IPv6-Regex.ps1 -Verbose VERBOSE: 0 of 470 unique tests failed in 75ms for 'IPv6 Regex' VERBOSE: 0 of 470 unique tests failed in 174ms for 'Compiled IPv6 Regex' VERBOSE: 19 of 470 unique tests failed in 88ms for 'Php1' VERBOSE: 0 of 470 unique tests failed in 98ms for 'RegexBuddy' VERBOSE: 0 of 470 unique tests failed in 142ms for 'Compiled RegexBuddy' VERBOSE: 11 of 470 unique tests failed in 120ms for 'Net IpAddress TryParse() Method' VERBOSE: 8 of 470 unique tests failed in 180ms for 'Qualified Net IpAddress TryParse() Method' VERBOSE: 0 of 470 unique tests failed in 202ms for 'Aeron Regex' TestName TestAddress ExpectedResult ActualResult -------- ----------- -------------- ------------ Php1 ::0:0:0:0:0:0:0 True False Php1 ::0:a:b:c:d:e:f True False Php1 ::2:3:4:5:6:7:8 True False Php1 ::2222:3333:4444:5555:6666:123.123.123.123 True False Php1 ::2222:3333:4444:5555:6666:7777:8888 True False Php1 :1.2.3.4 False True Php1 :10.0.0.1 False True Php1 :2222:3333:4444:5555:6666:1.2.3.4 False True Php1 :3333:4444:5555:6666:1.2.3.4 False True Php1 :4444:5555:6666:1.2.3.4 False True Php1 :5555:6666:1.2.3.4 False True Php1 :6666:1.2.3.4 False True Php1 0:0:0:0:0:0:0:: True False Php1 0:a:b:c:d:e:f:: True False Php1 1111:2222:3333:4444:5555:6666:00.00.00.00 False True Php1 1111:2222:3333:4444:5555:6666:000.000.000.000 False True Php1 1111:2222:3333:4444:5555:6666:7777:: True False Php1 a:b:c:d:e:f:0:: True False Php1 fe80:0000:0000:0000:0204:61ff:254.157.241.086 False True Net IpAddress TryParse() Method ::0:0:0:0:0:0:0 True False Net IpAddress TryParse() Method ::0:a:b:c:d:e:f True False Net IpAddress TryParse() Method ::2:3:4:5:6:7:8 True False Net IpAddress TryParse() Method ::2222:3333:4444:5555:6666:123.123.123.123 True False Net IpAddress TryParse() Method ::2222:3333:4444:5555:6666:7777:8888 True False Net IpAddress TryParse() Method 1.2.3.4 False True Net IpAddress TryParse() Method 1111 False True Net IpAddress TryParse() Method 1111:2222:3333:4444:5555:6666:00.00.00.00 False True Net IpAddress TryParse() Method 1111:2222:3333:4444:5555:6666:000.000.000.000 False True Net IpAddress TryParse() Method 123 False True Net IpAddress TryParse() Method fe80:0000:0000:0000:0204:61ff:254.157.241.086 False True Qualified Net IpAddress TryParse() Method ::0:0:0:0:0:0:0 True False Qualified Net IpAddress TryParse() Method ::0:a:b:c:d:e:f True False Qualified Net IpAddress TryParse() Method ::2:3:4:5:6:7:8 True False Qualified Net IpAddress TryParse() Method ::2222:3333:4444:5555:6666:123.123.123.123 True False Qualified Net IpAddress TryParse() Method ::2222:3333:4444:5555:6666:7777:8888 True False Qualified Net IpAddress TryParse() Method 1111:2222:3333:4444:5555:6666:00.00.00.00 False True Qualified Net IpAddress TryParse() Method 1111:2222:3333:4444:5555:6666:000.000.000.000 False True Qualified Net IpAddress TryParse() Method fe80:0000:0000:0000:0204:61ff:254.157.241.086 False True Version History: V1.0 (This version) - Initial release to the PowerShell Gallery and TechNet Script Center V0.1-0.9 Dev versions '@ $Tags = @( 'Regex' 'PowerShell' 'IPv6' 'IpAddress' 'Network' 'Address' 'rfc4291' 'rfc5952' 'rfc3986' 'rfc4007' ) $PublishParams = @{ Name = 'IPv6Regex' NuGetApiKey = 'XXXXRedactedXXXX' ReleaseNotes = $ReleaseNotes Tags = $Tags ProjectUri = 'https://github.com/ChrisWarwick/IPv6Regex' } Publish-Module @PublishParams # ...later # Find-Module IPv6Regex |