en-US/about_HPEOneView.540.help.txt
|
TOPIC
about_HPEOneView.540 COPYRIGHT (C) Copyright 2013-2021 Hewlett Packard Enterprise Development LP LICENSE Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. SHORT DESCRIPTION PowerShell library for HPE OneView 5.40 WHAT'S NEW Release 5.40.2929.2263 -- Deprecated Invoke-OVVcmMigration as the functionality was removed from HPE OneView 5.40. -- [#564] Fixed Set-OVSmtpConfig to send a properly formatted request to the appliance REST API to disable email alert filters. -- Added -UseMXRecordLookup to Set-OVSmtpConfig Cmdlet to allow for DNS MX record lookup to be used instead of specifying an SMTP server with the -Server parameter. -- Enhanced Get-OVServer to return expanded server hardware inventory. This now fully populates the subResources property with available inventory data. -- [#512] Fixed Set-OVUplinkSet to add and remove associated networks when adding/removing network set(s). -- Added Windows Server 2019 and Ubuntu values for HostOStype parameter within New-OVServerProfile, New-OVServerProfileTemplate and New-OVServerProfileAttachVolume Cmdlets. -- [#569] Refactored detection of duplicate JSON pattern in API response, mainly with FW baselines/SPPs. -- Refactored Show-OVLogicalInterconnectMacTable to return properly formatted object, instead of Microsoft.PowerShell.Commands.Internal.Format.FormatEntryData from Format-Table. -- [#572] Fixed issue with ConvertTo-OVPowerShellScript incorrectly handling profile connection types and getting the assigned network details causing an error. -- [#512] Fixed regression in Set-OVUplinkSet. -- Refactored Show-OVLogicalInterconnectMacTable to return properly formatted object, instead of Microsoft.PowerShell.Commands.Internal.Format.FormatEntryData from Format-Table. -- Enhanced Invoke-OVUpdate to handle an issue with the update progress tracker API. Release 5.40.2725.2163 -- Updated New-OVUplinkSet to ensure ImageStreamer type always sets LacpLoadBalancingMode to "None". -- Relaxed Show-OVFirmwareReport to allow supported Monitored server hardware resources in report collection. -- Fixed issue with Show-OVFirmwareReport not handling SDFlex compute partitions when attempting to display firmware. -- Enhanced Show-OVFirmwareReport to handle baselines that are associated with supported resources and are no longer present on the appliance. -- [#554] Fixed Synergy fabric module typo in New-OVLogicalInterconnectGroup for HPE Synergy 32Gb FC module. -- [#556] Updated Server.format.ps1xml to display connection address when is User Assigned from using Show-OVServerProfileConnection. -- [#557] Fixed New-OVLdapGroup and Set-OVLdapGroup requiring -Credential parameter when the authentication directory is assigned a service account. -- [#558] Fixed ConvertTo-OVPowerShellScript not handling multiple logical interconnect group mappings, and IPv6 Address pools. -- [#561] Fixed ConvertTo-OVPowerShellScript not providing server profile connection network name variable in generated script code. -- Fixed an issue within Set-OVUplinkSet where a provided Uplink Set resource (from Get-OVUplinkSet) reports an incorrect category type, causing validation logic to fail. -- Added -Name parameter to Get-OVAddressPoolRange to assist with filtering for specific pool ranges. -- Added -Append parameter to Set-OVLdapGroup and Set-OVUser Cmdlets to change the behavior of changing the roles or scope permissions. -- Updated New-OVServerProfile to support adding new logical drive and connection configurations while creating profile from template. Release 5.40.2689.2416 -- [#538] Fixed HPEOneView.Networking.SnmpV3User class to return NA instead of NONE when authentication protocol and no privacy protocol setting. -- [#552] Fixed duplicate key when attempting to convert from JSON to object with baselines. Release 5.40.2681.1725 -- [#534] Fixed Show-OVFirmwareReport mishandling non-existent firmware baselines. -- [#539] Fixed New-OVSnmpTrapDestination and the object it returns. -- [#540] Fixed New-OVSnmpTrapDestination to handle SNMPv3 Engine ID correctly. -- [#548] Fixed Enable-OVDeviceUid and Disable-OVDeviceUid where a resource eTag wasn't being passed to the API for Synergy Frames. -- Added Get-OVSmtpAlertEmailFilter, Set-OVSmtpAlertEmailFilter and Remove-OVSmtpAlertEmailFilter Cmdlets to manage email/SMTP alert filtering. -- Fixed New-OVServerProfileTemplate mishandling async task in an error state containing more than one taskError message. Release 5.40.2605.2185 -- Updated New-OVNetworkSet to change -Networks parameter to no longer required. -- Fixed New-OVSnmpV3User where paraeter validation logic was incorrect when providing the -AuthPassword parameter with -SecurityLevel to "AuthOnly". -- Fixed issue with Install-OVUpdate not handling error conditions from the API correctly. -- [#509] Fixed New-OVServerProfileTemplate and New-OVServerProfile where each Cmdlet would not handle TargetAddress parameter correctly. -- [#511] Enhanced New-OVServerProfileLogicalDisk to support permanent logical JBODs when assigned to server profile templates and server profiles. -- Enhanced Install-OVLogicalInterconnectFirmware to support Orchestrated firmware installation for HPE Synergy Virtual Connect fabrics. -- Enhanced Install-OVLogicalInterconnectFirmware to support HPE Synergy Orchestrated activation, and HPE SAS logical interconnect type. -- [#512] Enhanced Set-OVUplinkSet by adding -AddNetworkSet and -RemoveNetworkSet parameters. -- [#513] Enhanced New-OVServerProfileConnection to support Unassigned network connections. -- [#514] Enhanced ConvertTo-OVPowerShellScript to handle unassign network connections. -- [#515] Enhanced New-OVNetwork to allow assigning bulk networks to network sets with the -VlanRange and -NetworkSet paramters. -- [#516] Fixed Get-OVLoginMessage and Set-OVLoginMessage mishandling of an internal variable resulting in an unable to transform class exception. -- [#519] Enhanced Set-OVApplianceBackupConfig to fetch remote servers public SCP/SFTP key. -- [#520] Fixed internal Upload-File function where uploaded hotfixes would not report their filesize. -- Added Test-OVRemoteSupportEvent Cmdlet to initiate an HPE OneView Remote Suport test case event. -- Enhanced New-OVApplianceTrustedCertificate to build and install the certificate chain of a provided public SSL certificate or host. The PowerShell client OS must have the certificate chain trusted in the operating systems trust store in order to properly build the certificate chain. Release 5.40.2559.2085 -- [#506] Fixed Get-OVAddressPool and Get-OVAddressPoolRange not returning IPv6 pools and ranges. -- [#507] Fixed Get-HPOVAlert where Start, End and Timespan values where not being handled correctly returning no results from the appliance API. -- [#87] Added new Cmdlet to report utilization for server hardware, server profiles assigned to server hardware and enclosures with Show-OVUtilization. -- Fixed New-OVRack where rack height was not being calculated when only UHeight was provided. Release 5.40.2551.2353 -- [#505] Updated Show-OVFirmwareReport use of PowerShell operator -Match to [Regex]::Match() method to avoid PowerShell treating embedded parenthesis characters in the evalutation string, which would result in "not enough ('s" error message. -- Added iLO helper Cmdlets New-OVServerProfileIloPolicy, New-OVIloLocalUserAccount and New-OVIloDirectoryGroup for Server Profile and Server Profile Template Cmdlets. -- Fixed New-OVServerProfileTemplate where invalid BIOS Boot Mode was being set for unsupported server hardware. -- [#499] Addressed Update-OVUserScript Cmdlet not writing to original file. Release 5.40.2541.2093 -- Fixed issue with Set-HPOVSanManager not returning a task object. -- [#504] Fixing merge issue with New-HPOVUplinkSet with invalid object property. -- Added additional LACP load balancing parameters to New-OVUplinkSet. Release 5.40.2534.2926 -- Initial HPE OneView 5.40 library release. -- Enhanced Set-OVManagedSan to perform additional validations to zone and alias policies. LONG DESCRIPTION This library provides HP OneView management capabilities for Windows PowerShell. The library can be used as either a CLI or using the core cmdlets to call from wrapper scripts. The core cmdlets are: -- Connect-OVMgmt -- Send-OVRequest -- New-OVResource -- Set-OVResource -- Remove-OVResource A set of sample scripts are also provided, that show how to fully configure an HP OneView appliance from the ground up. For information regarding this project, to request features or report issues, please see: https://github.com/HewlettPackard/POSH-HPEOneView/issues SEE ALSO https://github.com/HewlettPackard/POSH-HPEOneView https://hpe-docs.gitbook.io/posh-hponeview http://hpe.com/info/oneviewcommunity Update-Help HPEOneView.540 Get-Help about_Appliance_Connections Get-Help about_Appliance_Connection_Permissions Get-Help about_Two_Factor_Authentication Get-Help Connect-OVmgmt Get-Help Send-OVRequest [install_dir]\Samples |