internal/Set-AzStackHCIVMLogicalNetwork.ps1
|
# ---------------------------------------------------------------------------------- # Copyright (c) Microsoft Corporation. All rights reserved. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # http://www.apache.org/licenses/LICENSE-2.0 # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code # is regenerated. # ---------------------------------------------------------------------------------- <# .Synopsis The operation to create or update a logical network. Please note some properties can be set only during logical network creation. .Description The operation to create or update a logical network. Please note some properties can be set only during logical network creation. .Example {{ Add code here }} .Example {{ Add code here }} .Outputs Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Models.ILogicalNetwork .Notes COMPLEX PARAMETER PROPERTIES To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables. SUBNET <ISubnet[]>: Subnet - list of subnets under the logical network [AddressPrefix <String>]: The address prefix for the subnet: Cidr for this subnet - IPv4, IPv6. [AddressPrefixes <List<String>>]: List of address prefixes for the subnet. [IPAllocationMethod <String>]: IPAllocationMethod - The IP address allocation method. Possible values include: 'Static', 'Dynamic' [IPConfigurationReference <List<ISubnetIPConfigurationReference>>]: IPConfigurationReferences - list of IPConfigurationReferences [Id <String>]: The ARM ID for a Network Interface. [IPPool <List<IIPPool>>]: network associated pool of IP Addresses [End <String>]: End of the IP address pool [Name <String>]: Name of the IP-Pool [Start <String>]: Start of the IP address pool [Type <String>]: Type of the IP Pool [vm, vippool] [Name <String>]: Name - The name of the resource that is unique within a resource group. This name can be used to access the resource. [NetworkSecurityGroupId <String>]: The ARM ID for a Network Security Group. [Route <List<IRoute>>]: Collection of routes contained within a route table. [AddressPrefix <String>]: The destination CIDR to which the route applies. [Name <String>]: Name - name of the subnet [NextHopIPAddress <String>]: The IP address packets should be forwarded to. Next hop values are only allowed in routes where the next hop type is VirtualAppliance. [Vlan <Int32?>]: Vlan to use for the subnet .Link https://learn.microsoft.com/powershell/module/azstackhci.vm/set-azstackhcivmlogicalnetwork #> function Set-AzStackHCIVMLogicalNetwork { [OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Models.ILogicalNetwork])] [CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')] param( [Parameter(Mandatory)] [Alias('LogicalNetworkName')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Path')] [System.String] # Name of the logical network ${Name}, [Parameter(Mandatory)] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Path')] [System.String] # The name of the resource group. # The name is case insensitive. ${ResourceGroupName}, [Parameter()] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Path')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')] [System.String] # The ID of the target subscription. # The value must be an UUID. ${SubscriptionId}, [Parameter(ParameterSetName='UpdateExpanded', Mandatory)] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Body')] [System.String] # The geo-location where the resource lives ${Location}, [Parameter(ParameterSetName='UpdateExpanded')] [AllowEmptyCollection()] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Body')] [System.String[]] # The list of DNS servers IP addresses. ${DhcpOptionDnsServer}, [Parameter(ParameterSetName='UpdateExpanded')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Body')] [System.String] # The name of the extended location. ${ExtendedLocationName}, [Parameter(ParameterSetName='UpdateExpanded')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.PSArgumentCompleterAttribute("CustomLocation")] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Body')] [System.String] # The type of the extended location. ${ExtendedLocationType}, [Parameter(ParameterSetName='UpdateExpanded')] [AllowEmptyCollection()] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Body')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Models.ISubnet[]] # Subnet - list of subnets under the logical network ${Subnet}, [Parameter(ParameterSetName='UpdateExpanded')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Body')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Models.ITrackedResourceTags]))] [System.Collections.Hashtable] # Resource tags. ${Tag}, [Parameter(ParameterSetName='UpdateExpanded')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Body')] [System.String] # name of the network switch to be used for VMs ${VMSwitchName}, [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Body')] [System.String] # Path of Json file supplied to the Update operation ${JsonFilePath}, [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Body')] [System.String] # Json string supplied to the Update operation ${JsonString}, [Parameter()] [Alias('AzureRMContext', 'AzureCredential')] [ValidateNotNull()] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Azure')] [System.Management.Automation.PSObject] # The DefaultProfile parameter is not functional. # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription. ${DefaultProfile}, [Parameter()] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Runtime')] [System.Management.Automation.SwitchParameter] # Run the command as a job ${AsJob}, [Parameter(DontShow)] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Runtime')] [System.Management.Automation.SwitchParameter] # Wait for .NET debugger to attach ${Break}, [Parameter(DontShow)] [ValidateNotNull()] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Runtime')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Runtime.SendAsyncStep[]] # SendAsync Pipeline Steps to be appended to the front of the pipeline ${HttpPipelineAppend}, [Parameter(DontShow)] [ValidateNotNull()] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Runtime')] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Runtime.SendAsyncStep[]] # SendAsync Pipeline Steps to be prepended to the front of the pipeline ${HttpPipelinePrepend}, [Parameter()] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Runtime')] [System.Management.Automation.SwitchParameter] # Run the command asynchronously ${NoWait}, [Parameter(DontShow)] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Runtime')] [System.Uri] # The URI for the proxy server to use ${Proxy}, [Parameter(DontShow)] [ValidateNotNull()] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Runtime')] [System.Management.Automation.PSCredential] # Credentials for a proxy server to use for the remote call ${ProxyCredential}, [Parameter(DontShow)] [Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Category('Runtime')] [System.Management.Automation.SwitchParameter] # Use the default credentials for the proxy ${ProxyUseDefaultCredentials} ) begin { try { $outBuffer = $null if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) { $PSBoundParameters['OutBuffer'] = 1 } $parameterSet = $PSCmdlet.ParameterSetName $mapping = @{ UpdateExpanded = 'AzStackHci.VM.private\Set-AzStackHCIVMLogicalNetwork_UpdateExpanded'; UpdateViaJsonFilePath = 'AzStackHci.VM.private\Set-AzStackHCIVMLogicalNetwork_UpdateViaJsonFilePath'; UpdateViaJsonString = 'AzStackHci.VM.private\Set-AzStackHCIVMLogicalNetwork_UpdateViaJsonString'; } if (('UpdateExpanded', 'UpdateViaJsonFilePath', 'UpdateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) { $testPlayback = $false $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.StackHCIVM.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } } if ($testPlayback) { $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1') } else { $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id } } $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet) $scriptCmd = {& $wrappedCmd @PSBoundParameters} $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin) $steppablePipeline.Begin($PSCmdlet) } catch { throw } } process { try { $steppablePipeline.Process($_) } catch { throw } } end { try { $steppablePipeline.End() } catch { throw } } } |