AxisPowershell.psd1
|
@{ RootModule = 'PSModule.psm1' GUID = '072c1e6d-39ea-4620-88b4-52d3a1156541' Author = 'Matt Small' Copyright = '(c) Matt Small. All rights reserved.' Description = "A module for managing Axis devices." PowerShellVersion = '3.0' #FormatsToProcess = '' FunctionsToExport = @( 'Add-AxisParameter' 'Add-AxisUserAccount' 'Disable-AxisUnusedViews' 'Enable-AxisDNSUpdate' 'Export-AxisRecording' 'Format-AxisSDCard' 'Get-AxisACAP' 'Get-AxisAction' 'Get-AxisCertificate' 'Get-AxisCertificateEnrollment' 'Get-AxisCertificateSubject' 'Get-AxisContinuousRecordingProfile' 'Get-AxisDate' 'Get-AxisDeviceInfo' 'Get-AxisDeviceStatus' 'Get-AxisDSCP' 'Get-AxisNetworkInfo' 'Get-AxisNTPClient' 'Get-AxisParameter' 'Get-AxisPSCertificateAuthority' 'Get-AxisPSCertificateTemplate' 'Get-AxisPSConfig' 'Get-AxisPSRecordingParams' 'Get-AxisRecording' 'Get-AxisRecordingProfile' 'Get-AxisRecordingSupport' 'Get-AxisSDCardStatus' 'Get-AxisSnapshot' 'Get-AxisStorageOptions' 'Get-AxisStreamProfile' 'Get-AxisStreamStatus' 'Get-AxisSupportedResolutions' 'Get-AxisUserAccount' 'Get-AxisViewStatus' 'Initialize-AxisDevice' 'Install-AxisCertificate' 'Invoke-AxisWebAPI' 'Invoke-AxisCertificateDeployment' 'Invoke-AxisProvisioningTask' 'New-AxisCertificateAuthority' 'New-AxisCertificateRequest' 'New-AxisProvisioningJob' 'New-AxisRecordingProfile' 'New-AxisStreamProfile' 'Optimize-AxisRecordingProfiles' 'Remove-AxisAction' 'Remove-AxisCertificate' 'Remove-AxisCertificateEnrollment' 'Remove-AxisParameter' 'Remove-AxisPSCertificateAuthority' 'Remove-AxisPSRecordingParams' 'Remove-AxisRecordingProfile' 'Remove-AxisStreamProfile' 'Remove-AxisUserAccount' 'Request-AxisCertificate' 'Reset-AxisDevice' 'Restart-AxisDevice' 'Set-AxisCertificateEnrollment' 'Set-AxisCredential' 'Set-AxisDNSResolver' 'Set-AxisDSCP' 'Set-AxisIPv4Address' 'Set-AxisNTPClient' 'Set-AxisParameter' 'Set-AxisPSCertificateTemplate' 'Set-AxisPSConfig' 'Set-AxisPSRecordingParams' 'Set-AxisServices' 'Set-AxisStorageOptions' 'Set-AxisStreamProfile' 'Set-AxisUserAccount' 'Update-AxisDevice' ) VariablesToExport = "*" AliasesToExport = "*" FileList = @( 'PSModule.psm1' ) RequiredModules = @( @{ModuleName='CredentialManager'; ModuleVersion='2.0'} @{ModuleName='IPV4Toolbox'; ModuleVersion='0.6.0'} @{ModuleName='PSLANSCAN'; ModuleVersion='1.2.0'} ) HelpInfoURI = '' ModuleVersion = '1.2.1' PrivateData = @{ PSData = @{ Tags = @( 'ManagedServiceProvider' 'Windows' ) IsPrerelease = $false ReleaseNotes = @' ## 1.2.1 * Test coverage for every public cmdlet (86 test files, 579 tests) on Windows PowerShell 5.1 and PowerShell 7. * Binding a certificate to the web server no longer switches the admin role to HTTPS-only (connection policy is preserved; enum is Http/Https/HttpAndHttps). * HTTPS-only is applied role by role (operator, viewer, then admin) and verified after the web server restart. * Invoke-AxisWebApi retries connection-level failures (web server restarts), reports HTTP 401 clearly, and TLS verification waits up to 45 s. * Fixed: password truncated to one character on PowerShell 7 (PtrToStringAuto -> PtrToStringBSTR) in provisioning and firmware upload. * Fixed: Get-AxisAction now uses the SOAP helper (works on PowerShell 7), Get-AxisRecording timestamps (24-hour clock, UTC suffix), Get-AxisStreamProfile -Name, Get-AxisSupportedResolutions on 5.1, Get-AxisSnapshot without System.Drawing, Get-AxisStreamStatus on firmware without the API. * Fixed: Remove-AxisUserAccount name, Reset-AxisDevice parameters, Update-AxisDevice wait loops, Export-AxisRecording parameters, user account URL encoding, Set-AxisDSCP, Set-AxisDNSResolver, Set-AxisStreamProfile, Set-AxisNTPClient, Optimize-AxisRecordingProfiles. * Fixed: Set-/Remove-AxisPSRecordingParams not persisting, Resolve-AxisCertificateAuthority default handling, Get-AxisCertificateSubject SAN for hostless devices, Get-AxisDate hard-coded address, Get-AxisACAP export. * Removed dead Set-AxisIPAddress.ps1 (alias of Set-AxisIPv4Address remains). ## 1.2.0 * Added Get-AxisCertificate, New-AxisCertificateRequest, Install-AxisCertificate and Remove-AxisCertificate (JSON certificate API on AXIS OS 11.6+, SOAP fallback on older firmware) * Added Get-AxisCertificateSubject for template-based subject/SAN generation * Added New-, Get-, Remove-AxisPSCertificateAuthority (WindowsCA, Dogtag, EST and Command authority types; secrets stored in the Windows Credential Manager) * Added Get-AxisPSCertificateTemplate and Set-AxisPSCertificateTemplate * Added Request-AxisCertificate for the full issue/install/bind/renew/revoke lifecycle of a single device, with the private key kept on the camera * Added Invoke-AxisCertificateDeployment for parallel apply/renew across many devices with a CSV report * Added Set-/Get-/Remove-AxisCertificateEnrollment to hand certificate renewal over to the camera's native EST client (AXIS OS 12.9+) * Provisioning jobs can now deploy a CA-issued HTTPS certificate as stage 5/8 (opt-in with Set-AxisPSConfig -EnableCertificateProvisioning) * Exported Remove-AxisUserAccount ## 1.1.3 * Fixed issue with Get-AxisDate where it would not work with firmware versions less than 9.30. * Fixed issue with Set-AxisDSCP where it would not accept the first value provided. * Added functionality to New-AxisProvisioningJob to allow the interfaceIP to be specified. ## 1.1.2 * Various fixes, security improvements, and code cleanup. ## 1.1.0 * Added Get-AxisPSRecordingParams * Added Set-AxisPSRecordingParams * Added Remove-AxisPSRecordingParams * Created ability to define specific recording parameters on a per-model basis ## 1.0.0 * Inital release. * Added documentation for AxisUserAccount cmdlets. * Code formatting and cleanup. ## 0.11.1 * Added break between formatting and retention setting as some cameras would not take the retention setting in a timely maner. ## 0.11.0 * Added Get-AxisDeviceStatus using SystemReady API * Added FactoryDefault option to Update-AxisDevice * Initialize-AxisDevice now checks devices status * Initialize-AxisDevice now sets password to the Stored Credential if no password is specified * Provisioning jobs now perform a factory default to account for the breaking changes in AxisOS 12.x * Provisioning jobs now encrypt the disk with the device password by default * Format-AxisSDCard now provides an option to encrypt the SD card * Fixed Set-AxisStorageOptions to set CleanupMaxAge for all SD cards * Fixed issue with New-AxisRecordingProfile where it would ignore the stream profile ## 0.10.2 * Added Get-AxisNTPClient * Added Set-AxisNTPClient * Added Get-AxisRecording * Added Set-AxisDNSResolver * Added Export-AxisRecording * Changed Set-AxisIPAddress to Set-AxisIPv4Address (Old command will still work) * Added ability to use static addresses with Set-AxisIPv4Address * Get-AxisNetworkInfo now returns the UPnP name of the device ## 0.10.1 * Fixed issue with Set-AxisDSCP ## 0.10.0 * Get-AxisRecordingSupport now returns a comma separated list of supported codecs * Added New-, Get-, Set-, Remove- Stream Profile commands * Fixed New-AxisRecordingProfile to properly tie to a stream profile * Invoke-AxisProvisioningTask now creates a stream profile called "EdgeRecording" which is used by New-AxisRecordingProfile * Invoke-AxisProvisioningTask now sets sensible DSCP values * Added Get-AxisDSCP ## 0.9.0 * Added support for setting DSCP values ## 0.8.4 * Minor bugfix for singlethreaded behavior ## 0.8.3 * Added Singlthreaded provisioning to try to resolve issues with runspaces ## 0.8.2 * Fixed formatting issue with Update-AxisDevice * Fixed output in Restart-AxisDevice * Fixed issue where New-AxisRecordingProfile incorrectly counted SDCards. ## 0.8.0 * Added support for customizing the directory provisioning snapshots are saved to ## 0.7.3 * Issue with Refactor causing script not to run ## 0.7.2 * Issue with Refactor causing script not to run ## 0.7.1 * Hotfix release * Fixed issue with Set-AxisServices * Fixed issue with Progress display during a provisioning job * Fixed issues with logging to file * Fixed issue where Set-AxisPSConfig would not change the logging directory ## 0.7.0 * Added AxisParameter cmdlets * Added Restart command * Refactored several cmdlets to use AxisParameter cmdlets * Changed behavior of Set-AxisServices to disable O3C by default * Combined PSConfig cmdlets into unified Set-AxisPSConfig / Get-AxisPSConfig ## 0.6.0 * Refactored Provision-AxisDevice * Added logging to file * Added Snapshot stage to Provision-AxisDevice * Fixed issue with Get-AxisRecordingProfile where it would not display the correct number of lenses * New-AxisRecordingProfile now completes successfully when a profile already exists * Changed the way of interacting with the config * Added logging to Provision-AxisDevice ## 0.5.1 * Documentation adjustments ## 0.5.0 * Removed Provision-AxisDevice to get rid of Verb warnings * Added Get-AxisSnapshot * Added logic to suppress errors when another command has already set TrustAllCerts * Modified behavior for Get-AxisDeviceInfo to use param.cgi to increase compatibility with older models. * Added functions to manipulate Event-to-Action configurations from the camera * Get-AxisRecordingProfiles now returns action-based recording profiles * Added Optimize-AxisRecordingProfiles ## 0.4.6 * Fixed issue with error reporting in New-AxisProvisioningJob ## 0.4.5 * Fixed issue with Provision-AxisDevice where it called New-AxisRecordingProfile with the wrong parameter * Fixed issue with Format-AxisSDCard where it would not check if there was an SD card to format ## 0.4.4 * Fixed issue with New-AxisProvisioningJob where it would not display progress or errors * Fixed issue with Set-AxisPSFactoryConfig where it would cause credential prompt on next command ## 0.4.3 * Credential storage hotfix ## 0.4.2 * Fixed issue with Get-AxisSDCardStatus where it would not display a disk number for SD Card 1 * Added Lens count to Get-AxisRecordingSupport * Added multi-lens support to New-AxisRecordingProfile * Fixed issues with dubnet calculation in New-AxisProvisioningJob * Added optional credential storage to Set-AxisCredential * Fixed issue with New-AxisProvisioningJob where it would stall if no devices were found ## 0.4.1 * Fixed issue with Format-AxisSDCard where it ignored the second SD card on P3737 and P3719 * Fixed issue with Get-AxisSDCardStatus where it ignored the second SD card on P3737 and P3719 * Fixed issue with Get-AxisDeviceInfo where it would not work against older cameras * Fixed issue with Enable-AxisDNSUpdate where it would not autopopulate the DNS name on older cameras ## 0.4.0 * Fixed issue connecting to cameras via HTTP * Fixed issue with Format-AxisSDCard showing progress when -Wait is not specified * Fixed issue with New-AxisProvisioningJob where it would not return error information. * Fixed issue with New-AxisProvisioningJob where it would not clear screen on final print. * Fixed issue with New-AxisProvisioningJob where IP was not provided to provisioning process. * Fixed issue with New-AxisProvisioningJob where it did not check for FirmwareFolder before run * Fixed issue with New-AxisProvisioningJob where incremental progress was not reported. ## 0.3.1 * Fixed issue with New-AxisProvisioningJob not functioning properly. ## 0.3.0 * Added New-AxisProvisioningJob * Bug fixes ## 0.2.0 * Further Bug fixes and readyment for inistal release ## 0.1.1 * Fixed issues with port from inital script ## 0.1.0 * First Release * May be buggy, but shouldn't break anything as all cmdlets only connect to things. '@ } } } |