public/Invoke-AxisProvisioningTask.ps1
|
<#
.SYNOPSIS Provisions an Axis device with various configuration options. .DESCRIPTION The Provision-AxisDevice function is used to provision a factory default Axis device with various configuration options. It supports: - Setting the device's password - Updating firmware - Configuring network settings - Enabling DHCP - Updating DNS settings - Configuring security settings - Formatting the SD card. .PARAMETER Device Specifies the name or IP address of the Axis device to provision. .PARAMETER FactoryPrep Indicates whether to perform factory preparation on the device. If specified, the device's DNS settings and security settings will be updated. .PARAMETER NewPassword Specifies the new password to set for the device. .PARAMETER DHCP Indicates whether to enable DHCP on the device. If specified and DHCP is not already enabled, the device's IP address will be set to obtain an IP address automatically. .PARAMETER DNS Indicates whether to set up Dynamic DNS updates on the device. If specified or FactoryPrep is specified, the device will dynamically update DNS entries. .PARAMETER SecuritySettings Indicates whether to configure the security settings on the device. If specified or FactoryPrep is specified, the device's security settings will be configured to best practices. .PARAMETER SDCard Indicates whether to format the SD card on the device. .PARAMETER FirmwareFile Specifies the path to the firmware file to update on the device. .EXAMPLE Provision-AxisDevice -Device "192.168.1.100" -NewPassword "MyNewPassword" -DHCP -DNS -SecuritySettings -SDCard Provisions the Axis device with the specified IP address, sets a new password, enables DHCP, updates DNS settings, configures security settings, and formats the SD card. .EXAMPLE Provision-AxisDevice -Device "AxisDevice01" -FactoryPrep Provisions the Axis device with the specified name and performs factory preparation, which updates DNS settings and configures security settings. #> function Invoke-AxisProvisioningTask { [cmdletbinding()] Param( [Parameter(Mandatory=$true)] [String]$Device, [Parameter(Mandatory=$false)] [String]$MacAddress ) ########### ## Begin ## ########### Write-Log -ID $MacAddress -Message "Starting Job" ########################### ## Stage 1: Set Password ## ########################### Write-Verbose "New Password" $ProgParam = @{ Activity = "Perfroming Factory Preparation on $Device..." Status = "Stage 1/7: Setting Password" PercentComplete = 0 } Write-Progress @ProgParam Write-Log -ID $MacAddress -Message "Checking Device State" #Check Device state $PasswordAlreadySet = $false Try { $null = Get-AxisDeviceInfo -Device $Device $PasswordAlreadySet = $true Write-Log -ID $MacAddress -Message "Device has already had password set" } Catch { Write-Log -ID $MacAddress -Message "Device in Factory default state" } #Set password if not already set if(!$PasswordAlreadySet) { # Extract plaintext password from PSCredential $BSTR = [System.Runtime.InteropServices.Marshal]::SecureStringToBSTR($Config.Credential.Password) $PlainPassword = [System.Runtime.InteropServices.Marshal]::PtrToStringAuto($BSTR) [System.Runtime.InteropServices.Marshal]::ZeroFreeBSTR($BSTR) #Send to device Try { Initialize-AxisDevice -Device $Device -NewPassword $PlainPassword Write-Log -ID $MacAddress -Message "Successfully set password" } Catch { Write-Log -ID $MacAddress -Message "Failed to set password" Write-Log -ID $MacAddress -Message $_.Exception.Message Throw $_ } } ############################## ## Stage 2: Update Firmware ## ############################## Write-Verbose "Update Firmware" $ProgParam = @{ Activity = "Perfroming Factory Preparation on $Device..." Status = "Stage 2/7: Updating Firmware" PercentComplete = 16 } Write-Progress @ProgParam Write-Log -ID $MacAddress -Message "Updating Firmware" Try { Update-AxisDevice -Device $Device Write-Log -ID $MacAddress -Message "Successfully Updated Device" } Catch { Write-Log -ID $MacAddress -Message "Failed to Update Device" Write-Log -ID $MacAddress -Message $_.Exception.Message Throw $_ } ################################# ## Stage 3: Set Network Config ## ################################# Write-Verbose "Set Network Settings" $ProgParam = @{ Activity = "Perfroming Factory Preparation on $Device..." Status = "Stage 3/7: Set Network Configuration" PercentComplete = 33 } Write-Progress @ProgParam Write-Log -ID $MacAddress -Message "Setting DNS Hostname" Try { Enable-AxisDNSUpdate -Device $Device Write-Log -ID $MacAddress -Message "Successfully set DNS Hostname" } Catch { Write-Log -ID $MacAddress -Message "Failed to set DNS Hostname" Write-Log -ID $MacAddress -Message $_.Exception.Message Throw $_ } Write-Log -ID $MacAddress -Message "Setting DSCP values" Try { Set-AxisDSCP -Device $Device Write-Log $MacAddress -Message "Successfully set DSCP values" } Catch { Write-Log -ID $MacAddress -Message "Failed to set DSCP values" Write-Log -ID $MacAddress -Message $_.Exception.Message Throw $_ } ################################## ## Stage 4: Set Security Config ## ################################## Write-Verbose "Applying Security Best Practices" $ProgParam = @{ Activity = "Perfroming Factory Preparation on $Device..." Status = "Stage 4/7: Applying Security Best Practices" PercentComplete = 50 } Write-Progress @ProgParam Write-Log -ID $MacAddress -Message "Setting Security Settings" Try { Set-AxisServices -Device $Device Write-Log -ID $MacAddress -Message "Successfully set security settings" } Catch { Write-Log -ID $MacAddress -Message "Failed to set security settings" Write-Log -ID $MacAddress -Message $_.Exception.Message Throw $_ } ############################# ## Stage 5: Format SD Card ## ############################# Write-Verbose "Formatting SD Card" $ProgParam = @{ Activity = "Perfroming Factory Preparation on $Device..." Status = "Stage 5/7: Formatting SD Card" PercentComplete = 67 } Write-Progress @ProgParam Write-Log -ID $MacAddress -Message "Formatting SD Card" Try { Format-AxisSDCard -Device $Device -Wait -NoProgress Write-Log -ID $MacAddress -Message "Successfully formatted SD Card" } Catch { Write-Log -ID $MacAddress -Message "Failed to format SD Card" Write-Log -ID $MacAddress -Message $_.Exception.Message Throw $_ } ################################# ## Stage 6: Set Edge Recording ## ################################# Write-Verbose "Creating Edge Recording Profile" $ProgParam = @{ Activity = "Perfroming Factory Preparation on $Device..." Status = "Stage 6/7: Creating Edge Recording Profile" PercentComplete = 84 } Write-Progress @ProgParam Write-Log -ID $MacAddress -Message "Creating Edge Recording Profile" Try { New-AxisStreamProfile -Device $Device -Name "EdgeRecording" Write-Log -ID $MacAddress -Message "Successfully created Stream Profile" } Catch { Write-Log -ID $MacAddress -Message "Failed to create Stream Profile" Write-Log -ID $MacAddress -Message $_.Exception.Message Throw $_ } Try { New-AxisRecordingProfile -Device $Device -StreamProfile "EdgeRecording" Write-Log -ID $MacAddress -Message "Successfully created Continuious Recording Profile" } Catch { Write-Log -ID $MacAddress -Message "Failed to create Continuious Recording Profile" Write-Log -ID $MacAddress -Message $_.Exception.Message Throw $_ } ############################### ## Stage 7: Getting Snapshot ## ############################### Write-Verbose "Getting snapshot from camera" $ProgParam = @{ Activity = "Perfroming Factory Preparation on $Device..." Status = "Stage 7/7: Getting Snapshot from camera" PercentComplete = 84 } Write-Progress @ProgParam Write-Log -ID $MacAddress -Message "Getting Snapshot from camera" Try { Get-AxisSnapshot -Device $Device -Path $Config.ProvisioningSnapshotPath -FileName $MacAddress Write-Log -ID $MacAddress -Message "Successfully created snapshot from camera" } Catch { Write-Log -ID $MacAddress -Message "Failed to create snapshot from camera" Write-Log -ID $MacAddress -Message $_.Exception.Message Throw $_ } ############## ## Complete ## ############## $ProgParam = @{ Activity = "Perfroming Factory Preparation on $Device..." Status = "Done" PercentComplete = 100 } Write-Progress @ProgParam Write-Log -ID $MacAddress -Message "Provisioning Complete" } |