Dynamic/New-AtwsContract.ps1
|
#Requires -Version 4.0 #Version 1.6.4.1 <# .COPYRIGHT Copyright (c) ECIT Solutions AS. All rights reserved. Licensed under the MIT license. See https://github.com/officecenter/Autotask/blob/master/LICENSE.md for license information. #> Function New-AtwsContract { <# .SYNOPSIS This function creates a new Contract through the Autotask Web Services API. All required properties are marked as required parameters to assist you on the command line. .DESCRIPTION The function supports all properties of an [Autotask.Contract] that can be updated through the Web Services API. The function uses PowerShell parameter validation and supports IntelliSense for selecting picklist values. Any required paramterer is marked as Mandatory in the PowerShell function to assist you on the command line. If you need very complicated queries you can write a filter directly and pass it using the -Filter parameter. To get the Contract with Id number 0 you could write 'New-AtwsContract -Id 0' or you could write 'New-AtwsContract -Filter {Id -eq 0}. 'New-AtwsContract -Id 0,4' could be written as 'New-AtwsContract -Filter {id -eq 0 -or id -eq 4}'. For simple queries you can see that using parameters is much easier than the -Filter option. But the -Filter option supports an arbitrary sequence of most operators (-eq, -ne, -gt, -ge, -lt, -le, -and, -or, -beginswith, -endswith, -contains, -like, -notlike, -soundslike, -isnotnull, -isnull, -isthisday). As you can group them using parenthesis '()' you can write arbitrarily complex queries with -Filter. To create a new Contract you need the following required fields: -AccountID -ContractName -ContractType -EndDate -StartDate -Status -TimeReportingRequiresStartAndStopTimes Entities that have fields that refer to the base entity of this CmdLet: AccountToDo BillingItem Contract ContractBillingRule ContractBlock ContractCost ContractExclusionAllocationCode ContractExclusionRole ContractFactor ContractMilestone ContractNote ContractRate ContractRetainer ContractRoleCost ContractService ContractServiceAdjustment ContractServiceBundle ContractServiceBundleAdjustment ContractServiceBundleUnit ContractServiceUnit ContractTicketPurchase InstalledProduct Project PurchaseOrderItem Ticket TimeEntry .INPUTS Nothing. This function only takes parameters. .OUTPUTS [Autotask.Contract]. This function outputs the Autotask.Contract that was created by the API. .EXAMPLE $result = New-AtwsContract -AccountID [Value] -ContractName [Value] -ContractType [Value] -EndDate [Value] -StartDate [Value] -Status [Value] -TimeReportingRequiresStartAndStopTimes [Value] Creates a new [Autotask.Contract] through the Web Services API and returns the new object. .EXAMPLE $result = Get-AtwsContract -Id 124 | New-AtwsContract Copies [Autotask.Contract] by Id 124 to a new object through the Web Services API and returns the new object. .EXAMPLE Get-AtwsContract -Id 124 | New-AtwsContract | Set-AtwsContract -ParameterName <Parameter Value> Copies [Autotask.Contract] by Id 124 to a new object through the Web Services API, passes the new object to the Set-AtwsContract to modify the object. .EXAMPLE $result = Get-AtwsContract -Id 124 | New-AtwsContract | Set-AtwsContract -ParameterName <Parameter Value> -Passthru Copies [Autotask.Contract] by Id 124 to a new object through the Web Services API, passes the new object to the Set-AtwsContract to modify the object and returns the new object. .LINK Get-AtwsContract .LINK Set-AtwsContract #> [CmdLetBinding(SupportsShouldProcess = $true, DefaultParameterSetName='By_parameters', ConfirmImpact='Low')] Param ( # An array of objects to create [Parameter( ParametersetName = 'Input_Object', ValueFromPipeline = $true )] [ValidateNotNullOrEmpty()] [Autotask.Contract[]] $InputObject, # User defined fields already setup i Autotask [Parameter( ParametersetName = 'By_parameters' )] [Alias('UDF')] [ValidateNotNullOrEmpty()] [Autotask.UserDefinedField[]] $UserDefinedFields, # Client [Parameter( Mandatory = $true, ParametersetName = 'By_parameters' )] [ValidateNotNullOrEmpty()] [Int] $AccountID, # Billing Preference [Parameter( ParametersetName = 'By_parameters' )] [string] $BillingPreference, # Contract Compilance [Parameter( ParametersetName = 'By_parameters' )] [boolean] $Compliance, # Contract Contact [Parameter( ParametersetName = 'By_parameters' )] [ValidateLength(0,250)] [string] $ContactName, # Category [Parameter( ParametersetName = 'By_parameters' )] [string] $ContractCategory, # Contract Name [Parameter( Mandatory = $true, ParametersetName = 'By_parameters' )] [Alias('Name')] [ValidateNotNullOrEmpty()] [ValidateLength(0,100)] [string] $ContractName, # Contract Number [Parameter( ParametersetName = 'By_parameters' )] [ValidateLength(0,50)] [string] $ContractNumber, # Contract Period Type [Parameter( ParametersetName = 'By_parameters' )] [string] $ContractPeriodType, # Contract Type [Parameter( Mandatory = $true, ParametersetName = 'By_parameters' )] [ValidateNotNullOrEmpty()] [string] $ContractType, # Default Contract [Parameter( ParametersetName = 'By_parameters' )] [boolean] $IsDefaultContract, # Description [Parameter( ParametersetName = 'By_parameters' )] [ValidateLength(0,2000)] [string] $Description, # End Date [Parameter( Mandatory = $true, ParametersetName = 'By_parameters' )] [ValidateNotNullOrEmpty()] [datetime] $EndDate, # Estimated Cost [Parameter( ParametersetName = 'By_parameters' )] [double] $EstimatedCost, # Estimated Hours [Parameter( ParametersetName = 'By_parameters' )] [double] $EstimatedHours, # Estimated Revenue [Parameter( ParametersetName = 'By_parameters' )] [double] $EstimatedRevenue, # Contract Overage Billing Rate [Parameter( ParametersetName = 'By_parameters' )] [double] $OverageBillingRate, # Start Date [Parameter( Mandatory = $true, ParametersetName = 'By_parameters' )] [ValidateNotNullOrEmpty()] [datetime] $StartDate, # Status [Parameter( Mandatory = $true, ParametersetName = 'By_parameters' )] [ValidateNotNullOrEmpty()] [string] $Status, # Service Level Agreement ID [Parameter( ParametersetName = 'By_parameters' )] [string] $ServiceLevelAgreementID, # Contract Setup Fee [Parameter( ParametersetName = 'By_parameters' )] [double] $SetupFee, # purchase_order_number [Parameter( ParametersetName = 'By_parameters' )] [ValidateLength(0,50)] [string] $PurchaseOrderNumber, # Time Reporting Requires Start and Stop Times [Parameter( Mandatory = $true, ParametersetName = 'By_parameters' )] [ValidateNotNullOrEmpty()] [string] $TimeReportingRequiresStartAndStopTimes, # opportunity_id [Parameter( ParametersetName = 'By_parameters' )] [Int] $OpportunityID, # Renewed Contract Id [Parameter( ParametersetName = 'By_parameters' )] [long] $RenewedContractID, # Contract Setup Fee Allocation Code ID [Parameter( ParametersetName = 'By_parameters' )] [long] $SetupFeeAllocationCodeID, # Exclusion Contract ID [Parameter( ParametersetName = 'By_parameters' )] [long] $ExclusionContractID, # Internal Currency Contract Overage Billing Rate [Parameter( ParametersetName = 'By_parameters' )] [double] $InternalCurrencyOverageBillingRate, # Internal Currency Contract Setup Fee [Parameter( ParametersetName = 'By_parameters' )] [double] $InternalCurrencySetupFee, # Contact ID [Parameter( ParametersetName = 'By_parameters' )] [Int] $ContactID, # Business Division Subdivision ID [Parameter( ParametersetName = 'By_parameters' )] [Int] $BusinessDivisionSubdivisionID, # Bill To Client ID [Parameter( ParametersetName = 'By_parameters' )] [Int] $BillToAccountID, # Bill To Client Contact ID [Parameter( ParametersetName = 'By_parameters' )] [Int] $BillToAccountContactID, # Contract Exclusion Set ID [Parameter( ParametersetName = 'By_parameters' )] [Int] $ContractExclusionSetID ) begin { $entityName = 'Contract' # Enable modern -Debug behavior if ($PSCmdlet.MyInvocation.BoundParameters['Debug'].IsPresent) { $DebugPreference = 'Continue' } Write-Debug -Message ('{0}: Begin of function' -F $MyInvocation.MyCommand.Name) $processObject = @() } process { if ($InputObject) { Write-Verbose -Message ('{0}: Copy Object mode: Setting ID property to zero' -F $MyInvocation.MyCommand.Name) $fields = Get-AtwsFieldInfo -Entity $entityName $CopyNo = 1 foreach ($object in $InputObject) { # Create a new object and copy properties $newObject = New-Object -TypeName Autotask.$entityName # Copy every non readonly property $fieldNames = $fields.Where( { $_.Name -ne 'id' }).Name if ($PSBoundParameters.ContainsKey('UserDefinedFields')) { $fieldNames += 'UserDefinedFields' } foreach ($field in $fieldNames) { $newObject.$field = $object.$field } if ($newObject -is [Autotask.Ticket]) { Write-Verbose -Message ('{0}: Copy Object mode: Object is a Ticket. Title must be modified to avoid duplicate detection.' -F $MyInvocation.MyCommand.Name) $title = '{0} (Copy {1})' -F $newObject.Title, $CopyNo $copyNo++ $newObject.Title = $title } $processObject += $newObject } } else { Write-Debug -Message ('{0}: Creating empty [Autotask.{1}]' -F $MyInvocation.MyCommand.Name, $entityName) $processObject += New-Object -TypeName Autotask.$entityName } # Prepare shouldProcess comments $caption = $MyInvocation.MyCommand.Name $verboseDescription = '{0}: About to create {1} {2}(s). This action cannot be undone.' -F $caption, $processObject.Count, $entityName $verboseWarning = '{0}: About to create {1} {2}(s). This action may not be undoable. Do you want to continue?' -F $caption, $processObject.Count, $entityName # Lets don't and say we did! if ($PSCmdlet.ShouldProcess($verboseDescription, $verboseWarning, $caption)) { # Process parameters and update objects with their values $processObject = $processObject | Update-AtwsObjectsWithParameters -BoundParameters $PSBoundParameters -EntityName $EntityName $result = Set-AtwsData -Entity $processObject -Create } } end { Write-Debug -Message ('{0}: End of function, returning {1} {2}(s)' -F $MyInvocation.MyCommand.Name, $result.count, $entityName) Return $result } } |