AutoTaskEndpointManagement.psm1
|
Function Add-EventLogSource { <# .DESCRIPTION Adds an Event Log source, for script/module logging. Adding an Event Log source requires administrative rights. .NOTES Author: Mike Hashemi V1.0.0.0 date: 19 April 2017 - Initial release. V1.0.0.1 date: 1 May 2017 - Minor updates to status handling. V1.0.0.2 date: 4 May 2017 - Added additional return value. V1.0.0.3 date: 22 May 2017 - Changed output to reduce the number of "Write-Host" messages. V1.0.0.4 date: 21 June 2017 - Fixed typo. - Significantly improved performance. - Changed logging. V1.0.0.5 date: 21 June 2017 - Added a return value if the event log source exists. V1.0.0.6 date: 28 June 2017 - Added [CmdletBinding()]. V1.0.0.7 date: 28 June 2017 - Added a check for the source, then a check on the status of the query. V1.0.0.8 date 9 February 2018 - Updated output to remove a message. .PARAMETER EventLogSource Mandatory parameter. This parameter is used to specify the event source, that script/modules will use for logging. #> [CmdletBinding()] Param ( [Parameter(Mandatory=$True)] $EventLogSource ) # Check if $EventLogSource exists as a source. If the shell is not elevated and the check fails to access the Security log, assume the source does not exist. Try { $sourceExists = [System.Diagnostics.EventLog]::SourceExists("$EventLogSource") } Catch { $sourceExists = $False } If ($sourceExists -eq $False) { $message = ("{0}: The event source `"{1}`" does not exist. Prompting for elevation." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor White Try { Start-Process PowerShell –Verb RunAs -ArgumentList "New-EventLog –LogName Application –Source $EventLogSource -ErrorAction Stop" } Catch [System.InvalidOperationException] { $message = ("{0}: It appears that the user cancelled the operation." -f (Get-Date -Format s)) Write-Host $message -ForegroundColor Yellow Return "Error" } Catch { $message = ("{0}: Unexpected error launching an elevated Powershell session. The specific error is: {1}" -f (Get-Date -Format s), $_.Exception.Message) Write-Host $message -ForegroundColor Red Return "Error" } Return "Success" } Else { $message = ("{0}: The event source `"{1}`" already exists. There is no action for {2} to take." -f (Get-Date -Format s), $EventLogSource, $MyInvocation.MyCommand) Write-Verbose $message Return "Success" } } #1.0.0.8 Function Find-AemSoftwareInstance { <# .DESCRIPTION Accepts an application name and optional device group, and returns a list of all devices where the application is installed. .NOTES V1.0.0.0 date: 17 August 2018 - Initial release. .PARAMETER Application Represents the name of an application, for which to search. .PARAMETER AemAccessToken Represents the token returned once successful authentication to the API is achieved. Use New-AemApiAccessToken to obtain the token. .PARAMETER SiteName When included, search for the specified application on machines from this site. If not included, search on machines in all sites (except Deleted Devices). .PARAMETER ApiUrl Default value is 'https://zinfandel-api.centrastage.net'. Represents the URL to AutoTask's AEM API, for the desired instance. .PARAMETER EventLogSource Default value is 'AemPowerShellModule'. This parameter is used to specify the event source, that script/modules will use for logging. .PARAMETER BlockLogging When this switch is included, the code will write output only to the host and will not attempt to write to the Event Log. .EXAMPLE PS C:\> Find-AemApplicationInstance -Application "CentraStage" -AemAccessToken <token> In this example, the function will search the audit data of devices in all sites (except Deleted Devices), for CentraStage. Output will be written to the event log and host. .EXAMPLE PS C:\> Find-AemApplicationInstance -Application "CentraStage" -AemAccessToken <token> -SiteName <site name> In this example, the function will search the audit data of devices in <site name> for CentraStage. Output will be written to the event log and host .EXAMPLE PS C:\> Find-AemApplicationInstance -Application "CentraStage" -AemAccessToken <token> -ApiUrl https://merlot.centrastage.net -BlockLogging In this example, the function will search the audit data of devices in all sites (except Deleted Devices), for CentraStage. Output will be written to the event log and host. In this example, the AEM instance is located in the "merlot" region. #> [CmdletBinding()] Param ( [Parameter(Mandatory = $True)] [string]$Application, [Parameter(Mandatory = $True, ValueFromPipeline = $true)] [string]$AemAccessToken, [string]$SiteName, [string]$ApiUrl = 'https://zinfandel-api.centrastage.net', [string]$EventLogSource = 'AemPowerShellModule', [switch]$BlockLogging ) Begin { If (-NOT($BlockLogging)) { $return = Add-EventLogSource -EventLogSource $EventLogSource If ($return -ne "Success") { $message = ("{0}: Unable to add event source ({1}). No logging will be performed." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor Yellow; $BlockLogging = $True } } } Process { $message = ("{0}: Beginning {1}." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} # Initialize variables. [hashtable]$devicesWithApp = @{} [int]$index = 0 # Setup the parameters for Get-AemDevices. If (($PSBoundParameters['Verbose'])) { $deviceQueryParams = @{ AemAccessToken = $AemAccessToken Verbose = $True } } Else { $deviceQueryParams = @{ AemAccessToken = $AemAccessToken } } # Retrieve device information from the API. If ($SiteName) { $message = ("{0}: Getting all devices in {1}." -f (Get-Date -Format s), $SiteName) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $allDevices = (Get-AemDevices @deviceQueryParams | Where-Object {($_.siteName -ne 'Deleted Devices') -and ($_.siteName -eq "$SiteName")}) } Else { $message = ("{0}: Getting all devices." -f (Get-Date -Format s), $SiteName) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $allDevices = (Get-AemDevices @deviceQueryParams | Where-Object {$_.siteName -ne 'Deleted Devices'}) } If (-NOT($allDevices)) { $message = ("{0}: Unable to locate devices. To prevent errors, {1} will exit." -f (Get-Date -Format s), $MyInvocation.MyCommand) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } Foreach ($device in $alldevices) { $message = ("{0}: Checking for {1} on {2} (device number {3} of {4})." -f (Get-Date -Format s), $Application, $device.hostname, $index, $allDevices.count) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, "/v2/audit/device/$($device.Uid)/software" Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } $message = ("{0}: Getting applications installed on {1}." -f (Get-Date -Format s), $device.hostname) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webrequest = Invoke-WebRequest @params -UseBasicParsing -ErrorAction Stop | ConvertFrom-Json } Catch { $message = ("{0}: It appears that the web request failed. The specific error message is: {1}" -f (Get-Date -Format s), $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} } Switch ($webrequest.software.count) { {$_ -gt 0} { # We have a device with a list of installed software. If ($webrequest.software.Name -match "$Application") { $message = ("{0}: Found {1}." -f (Get-Date -Format s), $Application) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $devicesWithApp.add($device.hostname, $device.siteName) } Continue } {$_ -eq 0} { Write-Host ("{0}: {1} returned no software information." -f (Get-Date -Format s), $device.hostname) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Warning -Message $message -EventId 5417} Continue } } $index++ } Return $devicesWithApp } } #1.0.0.0 Function Get-AemDevice { <# .DESCRIPTION Retrieves either individual devices by ID or UID, or all devices from AutoTask Endpoint Management. .NOTES Author: Mike Hashemi V1.0.0.0 date: 16 June 2018 - Initial release. V1.0.0.1 date: 17 June 2018 - Fixed typo in help. - Changed return to filter out duplicate devices based on the Id field. V1.0.0.2 date: 17 June 2018 - Removed uniqueness filter from return statement. V1.0.0.3 date: 16 August 2018 - Updated white space. V1.0.0.4 date: 18 November 2018 - Konstantin Kaminskiy renamed to Get-AemDevice, added ability to get device by UID. V1.0.0.5 date: 21 November 2018 - Updated white space. .PARAMETER AemAccessToken Mandatory parameter. Represents the token returned once successful authentication to the API is achieved. Use New-AemApiAccessToken to obtain the token. .PARAMETER DeviceId Represents the ID number (e.g. 23423) of the desired device. .PARAMETER DeviceUID Represents the UID (31fcea20-3924-c976-0a59-52ec4a2bbf6f) of the desired device. .PARAMETER All Use this parameter to get all devices from Autotask Endpoint Management. .PARAMETER ApiUrl Default value is 'https://zinfandel-api.centrastage.net'. Represents the URL to AutoTask's AEM API, for the desired instance. .PARAMETER EventLogSource Default value is 'AemPowerShellModule'. This parameter is used to specify the event source, that script/modules will use for logging. .PARAMETER BlockLogging When this switch is included, the code will write output only to the host and will not attempt to write to the Event Log. .EXAMPLE Get-AemDevice -AemAccessToken $token This will return all devices. .EXAMPLE Get-AemDevice -AemAccessToken $token -DeviceId $id This will return the device matching the specified id. .EXAMPLE Get-AemDevice -AemAccessToken $token -DeviceUID $UID This will return the device matching the specified UID. #> [CmdletBinding(DefaultParameterSetName = ’AllDevices’)] Param ( [Parameter(Mandatory = $True, ValueFromPipeline = $true)] [Parameter(ParameterSetName = 'AllDevices')] [Parameter(ParameterSetName = 'IDFilter')] [Parameter(ParameterSetName = 'UIDFilter')] [string]$AemAccessToken, [Parameter(Mandatory = $false, ParameterSetName = 'IDFilter')] [int]$DeviceId, [Parameter(Mandatory = $false, ParameterSetName = 'UIDFilter')] [string]$DeviceUID, [string]$ApiUrl = 'https://zinfandel-api.centrastage.net', [string]$EventLogSource = 'AemPowerShellModule', [switch]$BlockLogging ) Begin { If (-NOT($BlockLogging)) { $return = Add-EventLogSource -EventLogSource $EventLogSource If ($return -ne "Success") { $message = ("{0}: Unable to add event source ({1}). No logging will be performed." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor Yellow; $BlockLogging = $True } } $message = ("{0}: Beginning {1}." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } Process { Switch ($PsCmdlet.ParameterSetName) { {$_ -in ("IDFilter", "AllDevices", "UIDFilter")} { # Define parameters for Invoke-WebRequest cmdlet. $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, "/v2/account/devices" Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } $message = ("{0}: Updated `$params hash table. The values are:`n{1}." -f (Get-Date -Format s), (($params | Out-String) -split "`n")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } "IDFilter" { $params.set_item("Uri", "$(($params.Uri).TrimEnd("/account/devices")+"/device/id/$DeviceId")") $message = ("{0}: Updated `$params hash table (Uri key). The values are:`n{1}." -f (Get-Date -Format s), (($params | Out-String) -split "`n")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } "UIDFilter" { $params.set_item("Uri", "$(($params.Uri).TrimEnd("/account/devices")+"/device/$DeviceUID")") $message = ("{0}: Updated `$params hash table (Uri key). The values are:`n{1}." -f (Get-Date -Format s), (($params | Out-String) -split "`n")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } } # Make request. $message = ("{0}: Making the first web request." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webResponse = (Invoke-WebRequest @params -UseBasicParsing -ErrorAction Stop).Content } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } Switch ($PsCmdlet.ParameterSetName) { "AllDevices" { $devices = ($webResponse | ConvertFrom-Json).devices } "IDFilter" { $devices = ($webResponse | ConvertFrom-Json) } "UIDFilter" { $devices = ($webResponse | ConvertFrom-Json) } } While ((($webResponse | ConvertFrom-Json).pageDetails).nextPageUrl) { $page = ((($webResponse | ConvertFrom-Json).pageDetails).nextPageUrl).Split("&")[1] $resourcePath = "/v2/account/devices?$page" $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, $resourcePath Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } $message = ("{0}: Making web request for page {1}." -f (Get-Date -Format s), $page.TrimStart("page=")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webResponse = (Invoke-WebRequest @params -UseBasicParsing).Content } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } $message = ("{0}: Retrieved an additional {1} devices." -f (Get-Date -Format s), (($webResponse|ConvertFrom-Json).devices).count) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $devices += ($webResponse|ConvertFrom-Json).devices } Return $devices } } #1.0.0.5 Function Get-AemDevicesFromSite { <# .DESCRIPTION Retrieves all devices from a user-specified site. .NOTES Author: Mike Hashemi V1.0.0.0 date: 17 June 2018 - Initial release. .PARAMETER AemAccessToken Mandatory parameter. Represents the token returned once successful authentication to the API is achieved. Use New-AemApiAccessToken to obtain the token. .PARAMETER SiteUid Represents the UID number (e.g. 9fd7io7a-fe95-44k0-9cd1-fcc0vcbc7900) of the desired site. .PARAMETER ApiUrl Default value is 'https://zinfandel-api.centrastage.net'. Represents the URL to AutoTask's AEM API, for the desired instance. .PARAMETER EventLogSource Default value is 'AemPowerShellModule'. This parameter is used to specify the event source, that script/modules will use for logging. .PARAMETER BlockLogging When this switch is included, the code will write output only to the host and will not attempt to write to the Event Log. .EXAMPLE Get-AemDevicesFromSite -AemAccessToken $token -SiteUid $uid This will get the devices for the specified site. #> [CmdletBinding()] Param ( [Parameter(Mandatory = $True)] [string]$AemAccessToken, [Parameter(Mandatory = $True)] [string]$SiteUid, [string]$ApiUrl = 'https://zinfandel-api.centrastage.net', [string]$EventLogSource = 'AemPowerShellModule', [switch]$BlockLogging ) Begin { If (-NOT($BlockLogging)) { $return = Add-EventLogSource -EventLogSource $EventLogSource If ($return -ne "Success") { $message = ("{0}: Unable to add event source ({1}). No logging will be performed." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor Yellow; $BlockLogging = $True } } } Process { $message = ("{0}: Beginning {1}." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, "/v2/site/$SiteUid/devices" Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } # Make request. $message = ("{0}: Making the first web request." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webResponse = (Invoke-WebRequest @params -UseBasicParsing -ErrorAction Stop).Content } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } $devices = ($webResponse | ConvertFrom-Json).devices While ((($webResponse | ConvertFrom-Json).pageDetails).nextPageUrl) { $page = ((($webResponse | ConvertFrom-Json).pageDetails).nextPageUrl).Split("&")[1] $resourcePath = "/v2/site/$SiteUid/devices?$page" $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, $resourcePath Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } $message = ("{0}: Making web request for page {1}." -f (Get-Date -Format s), $page.TrimStart("page=")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webResponse = (Invoke-WebRequest @params -UseBasicParsing).Content } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } $message = ("{0}: Retrieved an additional {1} devices." -f (Get-Date -Format s), (($webResponse|ConvertFrom-Json).devices).count) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $devices += ($webResponse | ConvertFrom-Json).devices } Return $devices } } #1.0.0.0 Function Get-AemSites { <# .DESCRIPTION Retrieves either individual or all sites from AutoTask Endpoint Management. .NOTES Author: Mike Hashemi V1.0.0.0 date: 17 June 2018 - Initial release. V1.0.0.1 date: 17 June 2018 - Removed uniqueness filter from return statement. V1.0.0.2 date: 17 August 2018 - Updated white space. - Changed parameter name from SiteId to SiteUid for clarity. .PARAMETER AemAccessToken Mandatory parameter. Represents the token returned once successful authentication to the API is achieved. Use New-AemApiAccessToken to obtain the token. .PARAMETER SiteUid Represents the UID number (e.g. 9fd7io7a-fe95-44k0-9cd1-fcc0vcbc7900) of the desired site. .PARAMETER ApiUrl Default value is 'https://zinfandel-api.centrastage.net'. Represents the URL to AutoTask's AEM API, for the desired instance. .PARAMETER EventLogSource Default value is 'AemPowerShellModule'. This parameter is used to specify the event source, that script/modules will use for logging. .PARAMETER BlockLogging When this switch is included, the code will write output only to the host and will not attempt to write to the Event Log. .EXAMPLE Get-AemSites -AemAccessToken $token This will return all sites. #> [CmdletBinding(DefaultParameterSetName = ’AllSites’)] Param ( [Parameter(Mandatory = $True)] [Parameter(ParameterSetName = ’AllSites’)] [Parameter(ParameterSetName = ’IDFilter’)] [string]$AemAccessToken, [Parameter(Mandatory = $True, ParameterSetName = ’IDFilter’)] [string]$SiteUid, [string]$ApiUrl = 'https://zinfandel-api.centrastage.net', [string]$EventLogSource = 'AemPowerShellModule', [switch]$BlockLogging ) Begin { If (-NOT($BlockLogging)) { $return = Add-EventLogSource -EventLogSource $EventLogSource If ($return -ne "Success") { $message = ("{0}: Unable to add event source ({1}). No logging will be performed." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor Yellow; $BlockLogging = $True } } $message = ("{0}: Beginning {1}." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } Process { Switch ($PsCmdlet.ParameterSetName) { {$_ -in ("IDFilter", "AllSites")} { # Define parameters for Invoke-WebRequest cmdlet. $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, "/v2/account/sites" Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } $message = ("{0}: Updated `$params hash table. The values are:`n{1}." -f (Get-Date -Format s), (($params | Out-String) -split "`n")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } "IDFilter" { $params.set_item("Uri", "$(($params.Uri).TrimEnd("/account/sites")+"/site/$SiteUid")") $message = ("{0}: Updated `$params hash table (Uri key). The values are:`n{1}." -f (Get-Date -Format s), (($params | Out-String) -split "`n")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } } # Make request. $message = ("{0}: Making the first web request." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webResponse = (Invoke-WebRequest @params -UseBasicParsing -ErrorAction Stop).Content } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } Switch ($PsCmdlet.ParameterSetName) { "AllSites" { $sites = ($webResponse | ConvertFrom-Json).sites } "IDFilter" { $sites = ($webResponse | ConvertFrom-Json) } } While ((($webResponse | ConvertFrom-Json).pageDetails).nextPageUrl) { $page = ((($webResponse | ConvertFrom-Json).pageDetails).nextPageUrl).Split("&")[1] $resourcePath = "/v2/account/sites?$page" $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, $resourcePath Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } $message = ("{0}: Making web request for page {1}." -f (Get-Date -Format s), $page.TrimStart("page=")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webResponse = (Invoke-WebRequest -UseBasicParsing @params).Content } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } $message = ("{0}: Retrieved an additional {1} sites." -f (Get-Date -Format s), (($webResponse | ConvertFrom-Json).sites).count) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $sites += ($webResponse | ConvertFrom-Json).sites } Return $sites } } #1.0.0.2 Function Get-AemSoftwareList { <# .DESCRIPTION Accepts a device UID and returns a list of installed applications. .NOTES V1.0.0.0 date: 17 August 2018 - Initial release. V1.0.0.1 date: 23 August 2018 - Updated output. - Fixed bug in setting up the web request parameters. V1.0.0.2 date: 26 February 2019 - Fixed bug in call to get RMM device. .PARAMETER AemAccessToken Mandatory parameter. Represents the token returned once successful authentication to the API is achieved. Use New-AemApiAccessToken to obtain the token. .PARAMETER DeviceId Device to get the software list for, by id. .PARAMETER DeviceUID Device to get the software list for, by uid. .PARAMETER ApiUrl Default value is 'https://zinfandel-api.centrastage.net'. Represents the URL to AutoTask's AEM API, for the desired instance. .PARAMETER EventLogSource Default value is 'AemPowerShellModule'. This parameter is used to specify the event source, that script/modules will use for logging. .PARAMETER BlockLogging When this switch is included, the code will write output only to the host and will not attempt to write to the Event Log. .EXAMPLE Get-AemSoftwareList -DeviceUid $uid -AemAccessToken $token Get the list of software for the agent specified by the uid. #> [CmdletBinding(DefaultParameterSetName = 'Default')] Param ( [Parameter(Mandatory = $True, ValueFromPipeline = $true)] [string]$AemAccessToken, [Parameter(Mandatory = $True, ParameterSetName = 'IdFilter')] [int]$DeviceId, [Parameter(Mandatory = $True, ParameterSetName = 'UidFilter')] [string]$DeviceUid, [string]$ApiUrl = 'https://zinfandel-api.centrastage.net', [string]$EventLogSource = 'AemPowerShellModule', [switch]$BlockLogging ) Begin { If (-NOT($BlockLogging)) { $return = Add-EventLogSource -EventLogSource $EventLogSource If ($return -ne "Success") { $message = ("{0}: Unable to add event source ({1}). No logging will be performed." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor Yellow; $BlockLogging = $True } } } Process { $message = ("{0}: Beginning {1}." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $message = ("{0}: Operating in {1}." -f (Get-Date -Format s), $PsCmdlet.ParameterSetName) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} # Setup the parameters for Get-AemDevices. If (($PSBoundParameters['Verbose'])) { $deviceQueryParams = @{ AemAccessToken = $AemAccessToken Verbose = $True } } Else { $deviceQueryParams = @{ AemAccessToken = $AemAccessToken } } If ($BlockLogging) { $deviceQueryParams.add("BlockLogging", $True) } Else { $deviceQueryParams.add("EventLogSource", $EventLogSource) } Switch ($PsCmdlet.ParameterSetName) { "IdFilter" { $message = ("{0}: Attempting to retrieve the UID of device {1}." -f (Get-Date -Format s), $DeviceId) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $DeviceUId = (Get-AemDevice -DeviceId $DeviceId @deviceQueryParams).Uid } } If ($DeviceUId) { $message = ("{0}: Found {1}." -f (Get-Date -Format s), $DeviceUid) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, "/v2/audit/device/$DeviceUid/software" Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } $message = ("{0}: Getting installed applications." -f (Get-Date -Format s)) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webResponse = Invoke-WebRequest -UseBasicParsing @params -ErrorAction Stop | ConvertFrom-Json } Catch { $message = ("{0}: It appears that the web request failed. The specific error message is: {1}" -f (Get-Date -Format s), $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } Return $webResponse.software } Else { $message = ("{0}: Unable to determine the Uid of the device with ID {1}. To prevent errors, {2} will exit." -f (Get-Date -Format s), $DeviceId, $MyInvocation.MyCommand) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } } } #1.0.0.1 Function Get-AemUsers { <# .DESCRIPTION Retrieves all users from AutoTask Endpoint Management. .NOTES Author: Mike Hashemi V1.0.0.0 date: 22 August 2018 - Initial release. .PARAMETER AemAccessToken Mandatory parameter. Represents the token returned once successful authentication to the API is achieved. Use New-AemApiAccessToken to obtain the token. .PARAMETER ApiUrl Default value is 'https://zinfandel-api.centrastage.net'. Represents the URL to AutoTask's AEM API, for the desired instance. .PARAMETER EventLogSource Default value is 'AemPowerShellModule'. This parameter is used to specify the event source, that script/modules will use for logging. .PARAMETER BlockLogging When this switch is included, the code will write output only to the host and will not attempt to write to the Event Log. .EXAMPLE .\Get-AemUsers -AemAccessToken <bearer token> This example returns an array of all AEM users and their properties. #> [CmdletBinding()] Param ( [Parameter(Mandatory = $True, ValueFromPipeline = $true)] [string]$AemAccessToken, [string]$ApiUrl = 'https://zinfandel-api.centrastage.net', [string]$EventLogSource = 'AemPowerShellModule', [switch]$BlockLogging ) Begin { If (-NOT($BlockLogging)) { $return = Add-EventLogSource -EventLogSource $EventLogSource If ($return -ne "Success") { $message = ("{0}: Unable to add event source ({1}). No logging will be performed." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor Yellow; $BlockLogging = $True } } $message = ("{0}: Beginning {1}." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } Process { # Define parameters for Invoke-WebRequest cmdlet. $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, "/v2/account/users" Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } # Make request. $message = ("{0}: Making the first web request." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webResponse = (Invoke-WebRequest @params -UseBasicParsing -ErrorAction Stop).Content } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } $users = ($webResponse | ConvertFrom-Json).users While ((($webResponse | ConvertFrom-Json).pageDetails).nextPageUrl) { $page = ((($webResponse | ConvertFrom-Json).pageDetails).nextPageUrl).Split("&")[1] $resourcePath = "/v2/account/users?$page" $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, $resourcePath Method = 'GET' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} } $message = ("{0}: Making web request for page {1}." -f (Get-Date -Format s), $page.TrimStart("page=")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $webResponse = (Invoke-WebRequest -UseBasicParsing @params).Content } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } $message = ("{0}: Retrieved an additional {1} devices." -f (Get-Date -Format s), (($webResponse|ConvertFrom-Json).devices).count) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} $users += ($webResponse|ConvertFrom-Json).users } Return $users } } #1.0.0.0 Function New-AemApiAccessToken { <# .DESCRIPTION Retrieves an authorization token from AutoTask. .NOTES Author: Mike Hashemi V1.0.0.0 date: 15 June 2018 - Initial release. V1.0.0.1 date: 17 June 2018 - Added missing closing backet. V1.0.0.2 date: 16 August 2018 - Removed Ssl3 and Tsl protocol support. - Added return. - Fixed output bug. The -BlockLogging parameter was blocking all output. - Updated white space. V1.0.0.3 date: 27 October 2018 - by Konstantin Kaminskiy - Adjusted returned data to include only the access token itself to increase ease of use .LINK .PARAMETER ApiKey Mandatory parameter. Represents the API key to AEM's REST API. .PARAMETER ApiSecretKey Mandatory parameter. Represents the API secret key to AEM's REST API. .PARAMETER EventLogSource Default value is 'AemPowerShellModule'. This parameter is used to specify the event source, that script/modules will use for logging. .PARAMETER ApiUrl Default value is 'https://zinfandel-api.centrastage.net'. Represents the URL to AutoTask's AEM API, for the desired instance. .PARAMETER BlockLogging When this switch is included, the code will write output only to the host and will not attempt to write to the Event Log. .EXAMPLE .\New-AemApiAccessToken -ApiKey XXXXXXXXXXXXXXXXXXXX -ApiSecretKey XXXXXXXXXXXXXXXXXXXX .EXAMPLE $token = New-AemApiAccessToken -ApiKey XXXXXXXXXXXXXXXXXXXX -ApiSecretKey XXXXXXXXXXXXXXXXXXXX Store your token in a variable for later use and re-use. #> [CmdletBinding()] param ( [Parameter(Mandatory = $True)] [string]$ApiKey, [Parameter(Mandatory = $True)] [string]$ApiSecretKey, [string]$ApiUrl = 'https://zinfandel-api.centrastage.net', [string]$EventLogSource = 'AemPowerShellModule', [switch]$BlockLogging ) #requires -Version 3.0 If (-NOT($BlockLogging)) { $return = Add-EventLogSource -EventLogSource $EventLogSource If ($return -ne "Success") { $message = ("{0}: Unable to add event source ({1}). No logging will be performed." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor Yellow; $BlockLogging = $True } } $message = ("{0}: Beginning {1}." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} # Specify security protocols. [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]'Tls11,Tls12' # Convert password to secure string. $securePassword = ConvertTo-SecureString -String 'public' -AsPlainText -Force # Define parameters for Invoke-WebRequest cmdlet. $params = @{ Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList ('public-client', $securePassword) Uri = '{0}/auth/oauth/token' -f $ApiUrl Method = 'POST' ContentType = 'application/x-www-form-urlencoded' Body = 'grant_type=password&username={0}&password={1}' -f $ApiKey, $ApiSecretKey } $message = ("{0}: Requesting a bearer token from AutoTask." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} # Request access token. Try { $webResponse = Invoke-WebRequest @params -UseBasicParsing -ErrorAction Stop | ConvertFrom-Json -ErrorAction Stop | Select-Object -ExpandProperty access_token } Catch { $message = ("{0}: Unexpected error generating an authorization token. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } If ($webResponse) { $webResponse } Else { Return "Error" } } #1.0.0.2 Function Set-AemDeviceUdf { <# .DESCRIPTION Sets the user defined fields of the device. .NOTES Author: Konstantin Kaminskiy V1.0.0.0 date: 5 November 2018 - Initial release. V1.0.0.1 date: 21 November 2018 - Updated white space. - Changed Out-Null to $null. .PARAMETER AemAccessToken Mandatory parameter. Represents the token returned once successful authentication to the API is achieved. Use New-AemApiAccessToken to obtain the token. .PARAMETER DeviceUid Represents the UID number (e.g. 9fd7io7a-fe95-44k0-9cd1-fcc0vcbc7900) of the desired device. .PARAMETER ApiUrl Default value is 'https://zinfandel-api.centrastage.net'. Represents the URL to AutoTask's AEM API, for the desired instance. .PARAMETER EventLogSource Default value is 'AemPowerShellModule'. This parameter is used to specify the event source, that script/modules will use for logging. .PARAMETER BlockLogging When this switch is included, the code will write output only to the host and will not attempt to write to the Event Log. .PARAMETER UdfData A hash table pairing the udfs and their intended values. .EXAMPLE $udfs = @{ 'udf1' = "String One" 'udf2' = "String Two" } Set-AemDeviceUDF -AemAccessToken $token -DeviceUID $deviceUid -UdfData $udfs This will set the udfs to the values provided in $udfs. .EXAMPLE $udfs = Get-AemDevices -AemAccessToken $token -DeviceId '764402' | Select-Object -ExpandProperty udf $newudfs = @{'udf6' = "$($udfs.udf6) - This data should be added"} Set-AemDeviceUDF -AemAccessToken $token -DeviceUid $uid -UdfData $newudfs -Verbose This will append to the udfs for the device. #> [CmdletBinding()] Param ( [Parameter(Mandatory = $True)] [string]$AemAccessToken, [Parameter(Mandatory = $True)] [string]$DeviceUid, [Parameter(Mandatory = $True)] [hashtable]$UdfData, [string]$ApiUrl = 'https://zinfandel-api.centrastage.net', [string]$EventLogSource = 'AemPowerShellModule', [switch]$BlockLogging ) Begin { If (-NOT($BlockLogging)) { $return = Add-EventLogSource -EventLogSource $EventLogSource If ($return -ne "Success") { $message = ("{0}: Unable to add event source ({1}). No logging will be performed." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor Yellow; $BlockLogging = $True } } $message = ("{0}: Beginning {1}." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } Process { # Define parameters for Invoke-WebRequest cmdlet. $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, "/v2/device/$DeviceUid/udf" Method = 'Post' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} Body = ($UdfData | ConvertTo-Json) } $message = ("{0}: Updated `$params hash table. The values are:`n{1}." -f (Get-Date -Format s), (($params | Out-String) -split "`n")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} # Make request. $message = ("{0}: Making the web request." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $null = Invoke-WebRequest @params -UseBasicParsing -ErrorAction Stop } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } } } #1.0.0.1 Function Set-AemSiteDescription { <# .DESCRIPTION Sets the description of the AEM site .NOTES Author: Konstantin Kaminskiy V1.0.0.0 date: 14 November 2018 - Initial release. V1.0.0.1 date: 21 November 2018 - Updated white space. - Changed Out-Null to $null. .PARAMETER AemAccessToken Mandatory parameter. Represents the token returned once successful authentication to the API is achieved. Use New-AemApiAccessToken to obtain the token. .PARAMETER SiteUid Represents the UID number (e.g. 9fd7io7a-fe95-44k0-9cd1-fcc0vcbc7900) of the desired site. .PARAMETER ApiUrl Default value is 'https://zinfandel-api.centrastage.net'. Represents the URL to AutoTask's AEM API, for the desired instance. .PARAMETER EventLogSource Default value is 'AemPowerShellModule'. This parameter is used to specify the event source, that script/modules will use for logging. .PARAMETER BlockLogging When this switch is included, the code will write output only to the host and will not attempt to write to the Event Log. .PARAMETER Description A string with the intended description of the site. .EXAMPLE Set-AemSiteDescription -AemAccessToken $token -SiteUID $SiteUid -Description "The one site to rule them all!" This will set the site description to "The one site to rule them all!". #> [CmdletBinding()] Param ( [Parameter(Mandatory = $True)] [string]$AemAccessToken, [Parameter(Mandatory = $True)] [string]$SiteUid, [Parameter(Mandatory = $True)] [string]$Description, [string]$ApiUrl = 'https://zinfandel-api.centrastage.net', [string]$EventLogSource = 'AemPowerShellModule', [switch]$BlockLogging ) Begin { If (-NOT($BlockLogging)) { $return = Add-EventLogSource -EventLogSource $EventLogSource If ($return -ne "Success") { $message = ("{0}: Unable to add event source ({1}). No logging will be performed." -f (Get-Date -Format s), $EventLogSource) Write-Host $message -ForegroundColor Yellow; $BlockLogging = $True } } $message = ("{0}: Beginning {1}." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} } Process { # Define parameters for Invoke-WebRequest cmdlet. $description = @{"description" = "$description"; "name" = (Get-AemSites -AemAccessToken $AemAccessToken -SiteUid $SiteUid -ApiUrl $ApiUrl | Select-Object -ExpandProperty name) } | ConvertTo-Json $params = @{ Uri = '{0}/api{1}' -f $ApiUrl, "/v2/site/$SiteUid" Method = 'Post' ContentType = 'application/json' Headers = @{'Authorization' = 'Bearer {0}' -f $AemAccessToken} Body = "$description" } $message = ("{0}: Updated `$params hash table. The values are:`n{1}." -f (Get-Date -Format s), (($params | Out-String) -split "`n")) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} # Make request. $message = ("{0}: Making the web request." -f (Get-Date -Format s), $MyInvocation.MyCommand) If (($BlockLogging) -AND ($PSBoundParameters['Verbose'])) {Write-Verbose $message} ElseIf ($PSBoundParameters['Verbose']) {Write-Verbose $message; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Information -Message $message -EventId 5417} Try { $null = Invoke-WebRequest @params -UseBasicParsing -ErrorAction Stop } Catch { $message = ("{0}: It appears that the web request failed. Check your credentials and try again. To prevent errors, {1} will exit. The specific error message is: {2}" ` -f (Get-Date -Format s), $MyInvocation.MyCommand, $_.Exception.Message) If ($BlockLogging) {Write-Host $message -ForegroundColor Red} Else {Write-Host $message -ForegroundColor Red; Write-EventLog -LogName Application -Source $eventLogSource -EntryType Error -Message $message -EventId 5417} Return "Error" } } } #1.0.0.1 |