Public/New-VIPRange.ps1
|
#Required by functions #New-P2PTunnelNAT <# .Description Create a New Virtual IP for a range .Parameter VIPName Specify a Unique name for the Virtual IP Object .Parameter ExternalCIDR Specify the External CIDR address used for the VIP Range. ex: 192.168.0.0/24 .Parameter Interface Specify the Name of the External Interface for the VIP .Parameter InternalCIDR Specify the Internal CIDR address used for the VIP Range. ex: 192.168.0.0/24 .Example $Params = @{ VIPName = "PatientPortal" ExternalCIDR = "192.168.8.0/24" Interface = "IPSecTunnel" InternalCIDR = "192.168.1.0/24" } New-VIPRange @params .Example New-SSHSession -computername 192.168.0.1 $Params = @{ VIPName = "PatientPortal" ExternalCIDR = "192.168.8.0/24" Interface = "IPSecTunnel" InternalCIDR = "192.168.1.0/24" } $command = New-VIPRange @params $result = Invoke-SSHCommand -Command $command -SessionId 0 $result.output This example generates an SSH session and invokes the output of this function against that session. .Example New-SSHSession -computername 192.168.0.1 New-SSHSession -computername 192.168.1.1 $Params = @{ VIPName = "PatientPortal" ExternalCIDR = "192.168.8.0/24" Interface = "IPSecTunnel" InternalCIDR = "192.168.1.0/24" } $command = New-VIPRange @params $sessions = Get-SSHSession foreach ($session in $sessions) { Write-Output "Invoking Command against $session.host" $result = Invoke-SSHCommand -Command $command -SessionId $session.sessionID $result.output } This example generates multiple SSH sessions and invokes the output of this function against all active sessions. .Notes Source NAT (IP Pool) and Destination NAT (Virtual IP) \ Destination NAT changes the destination address of packets passing through the Router. It also offers the option to perform the port translation in the TCP/UDP headers. Destination NAT mainly used to redirect incoming packets with an external address or port destination to an internal IP address or port inside the network. \ Source NAT is most commonly used for translating private IP address to a public routable address to communicate with the host. Source NAT changes the source address of the packets that pass through the Router. A NAT pool is a set of addresses that are designed as a replacement for client IP addresses. .Link https://github.com/TheTaylorLee/AdminToolbox/tree/master/docs #> Function New-VIPRange { [CmdletBinding()] Param ( [Parameter(Mandatory = $true)]$VIPName, [Parameter(Mandatory = $true)]$Interface, [Parameter(Mandatory = $true)] [ValidateScript( { if ($_ -match '^[0-9]{1,3}[.]{1}[0-9]{1,3}[.]{1}[0-9]{1,3}[.]{1}[0-9]{1,3}[/]{1}[0-9]{2}$') { $true } else { throw "$_ is an invalid pattern. You must provide a proper CIDR format. ex: 192.168.0.0/24" } })] $ExternalCIDR, [Parameter(Mandatory = $true)] [ValidateScript( { if ($_ -match '^[0-9]{1,3}[.]{1}[0-9]{1,3}[.]{1}[0-9]{1,3}[.]{1}[0-9]{1,3}[/]{1}[0-9]{2}$') { $true } else { throw "$_ is an invalid pattern. You must provide a proper CIDR format. ex: 192.168.0.0/24" } })] $InternalCIDR ) #Calculate for External CIDR $Externalcalc = Invoke-PSipcalc $Externalcidr $ExternalStartIP = ($Externalcalc).HostMin $ExternalEndIP = ($Externalcalc).HostMax $ExternalRange = "$ExternalStartIP" + "-" + "$ExternalEndIP" #Calculate for Internal CIDR $Internalcalc = Invoke-PSipcalc $Internalcidr $InternalStartIP = ($Internalcalc).HostMin $InternalEndIP = ($Internalcalc).HostMax $InternalRange = "$InternalStartIP" + "-" + "$InternalEndIP" Write-Output " config firewall vip edit ""$VIPName"" set extip ""$ExternalRange"" set extintf ""$Interface"" set mappedip ""$InternalRange"" next end" } |