Public/New-IPPoolOverload.ps1
|
Function New-IPPoolOverLoad { <# .Description Create a New Overload IP Pool .Parameter IPPoolName Specify a Unique name for the IP Pool .Parameter StartIP Specify an IPAddress that will be at the begining of the Overload NAT .Parameter EndIP Specify an IPAddress that will be at the end of the Overload NAT .Example $Params = @{ IPPoolName = "SSLVPNNAT" StartIP = "10.155.127.1" EndIP = "10.155.127.254" } New-IPPoolOverload @params .Notes Source NAT (IP Pool) and Destination NAT (Virtual IP) Destination NAT changes the destination address of packets passing through the Router. It also offers the option to perform the port translation in the TCP/UDP headers. Destination NAT mainly used to redirect incoming packets with an external address or port destination to an internal IP address or port inside the network. Source NAT is most commonly used for translating private IP address to a public routable address to communicate with the host. Source NAT changes the source address of the packets that pass through the Router. A NAT pool is a set of addresses that are designed as a replacement for client IP addresses. .Link https://github.com/TheTaylorLee/AdminToolbox/tree/master/docs #> [CmdletBinding()] Param ( [Parameter(Mandatory = $true)]$IPPoolName, [Parameter(Mandatory = $true)][ValidatePattern('^[0-9]{1,3}[.]{1}[0-9]{1,3}[.]{1}[0-9]{1,3}[.]{1}[0-9]{1,3}$')]$StartIP, [Parameter(Mandatory = $true)][ValidatePattern('^[0-9]{1,3}[.]{1}[0-9]{1,3}[.]{1}[0-9]{1,3}[.]{1}[0-9]{1,3}$')]$EndIP ) Write-Output " config firewall ippool edit ""$IPPoolName"" set startip $StartIP set endip $EndIP next end " } |