AWS.Tools.WorkMail.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.WorkMail</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.WM.AddWMDelegateToResourceCmdlet"> <summary> Adds a member (user or group) to the resource's set of delegates. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMDelegateToResourceCmdlet.EntityId"> <summary> <para> <para>The member (user or group) to associate to the resource.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMDelegateToResourceCmdlet.OrganizationId"> <summary> <para> <para>The organization under which the resource exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMDelegateToResourceCmdlet.ResourceId"> <summary> <para> <para>The resource for which members (users or groups) are associated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMDelegateToResourceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.AssociateDelegateToResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMDelegateToResourceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EntityId parameter. The -PassThru parameter is deprecated, use -Select '^EntityId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMDelegateToResourceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.AddWMMemberToGroupCmdlet"> <summary> Adds a member (user or group) to the group's set. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMMemberToGroupCmdlet.GroupId"> <summary> <para> <para>The group to which the member (user or group) is associated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMMemberToGroupCmdlet.MemberId"> <summary> <para> <para>The member (user or group) to associate to the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMMemberToGroupCmdlet.OrganizationId"> <summary> <para> <para>The organization under which the group exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMMemberToGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.AssociateMemberToGroupResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMMemberToGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the MemberId parameter. The -PassThru parameter is deprecated, use -Select '^MemberId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMMemberToGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.AddWMResourceTagCmdlet"> <summary> Applies the specified tags to the specified Amazon WorkMail organization resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMResourceTagCmdlet.ResourceARN"> <summary> <para> <para>The resource ARN.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMResourceTagCmdlet.Tag"> <summary> <para> <para>The tag key-value pairs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.TagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceARN parameter. The -PassThru parameter is deprecated, use -Select '^ResourceARN' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.AddWMResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlEffectCmdlet"> <summary> Gets the effects of an organization's access control rules as they apply to a specified IPv4 address, access protocol action, or user ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlEffectCmdlet.Action"> <summary> <para> <para>The access protocol action. Valid values include <code>ActiveSync</code>, <code>AutoDiscover</code>, <code>EWS</code>, <code>IMAP</code>, <code>SMTP</code>, <code>WindowsOutlook</code>, and <code>WebMail</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlEffectCmdlet.IpAddress"> <summary> <para> <para>The IPv4 address.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlEffectCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlEffectCmdlet.UserId"> <summary> <para> <para>The user ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlEffectCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.GetAccessControlEffectResponse). Specifying the name of a property of type Amazon.WorkMail.Model.GetAccessControlEffectResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlEffectCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the OrganizationId parameter. The -PassThru parameter is deprecated, use -Select '^OrganizationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlRuleListCmdlet"> <summary> Lists the access control rules for the specified organization. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlRuleListCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlRuleListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Rules'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListAccessControlRulesResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListAccessControlRulesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAccessControlRuleListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the OrganizationId parameter. The -PassThru parameter is deprecated, use -Select '^OrganizationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMAliasListCmdlet"> <summary> Creates a paginated call to list the aliases associated with a given entity.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAliasListCmdlet.EntityId"> <summary> <para> <para>The identifier for the entity for which to list the aliases.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAliasListCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the entity exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAliasListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to return in a single call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAliasListCmdlet.NextToken"> <summary> <para> <para>The token to use to retrieve the next page of results. The first call does not contain any tokens.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAliasListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Aliases'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListAliasesResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListAliasesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAliasListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EntityId parameter. The -PassThru parameter is deprecated, use -Select '^EntityId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMAliasListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMDelegateListCmdlet"> <summary> Lists the delegates associated with a resource. Users and groups can be resource delegates and answer requests on behalf of the resource.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMDelegateListCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization that contains the resource for which delegates are listed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMDelegateListCmdlet.ResourceId"> <summary> <para> <para>The identifier for the resource whose delegates are listed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMDelegateListCmdlet.MaxResult"> <summary> <para> <para>The number of maximum results in a page.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMDelegateListCmdlet.NextToken"> <summary> <para> <para>The token used to paginate through the delegates associated with a resource.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMDelegateListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Delegates'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListResourceDelegatesResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListResourceDelegatesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMDelegateListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMDelegateListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMGroupCmdlet"> <summary> Returns the data available for the group. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupCmdlet.GroupId"> <summary> <para> <para>The identifier for the group to be described.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the group exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DescribeGroupResponse). Specifying the name of a property of type Amazon.WorkMail.Model.DescribeGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMGroupListCmdlet"> <summary> Returns summaries of the organization's groups.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupListCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the groups exist.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to return in a single call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupListCmdlet.NextToken"> <summary> <para> <para>The token to use to retrieve the next page of results. The first call does not contain any tokens.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Groups'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListGroupsResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the OrganizationId parameter. The -PassThru parameter is deprecated, use -Select '^OrganizationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMGroupListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxDetailCmdlet"> <summary> Requests a user's mailbox details for a specified organization and user. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxDetailCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization that contains the user whose mailbox details are being requested.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxDetailCmdlet.UserId"> <summary> <para> <para>The identifier for the user whose mailbox details are being requested.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxDetailCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.GetMailboxDetailsResponse). Specifying the name of a property of type Amazon.WorkMail.Model.GetMailboxDetailsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxDetailCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the UserId parameter. The -PassThru parameter is deprecated, use -Select '^UserId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxPermissionListCmdlet"> <summary> Lists the mailbox permissions associated with a user, group, or resource mailbox.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxPermissionListCmdlet.EntityId"> <summary> <para> <para>The identifier of the user, group, or resource for which to list mailbox permissions.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxPermissionListCmdlet.OrganizationId"> <summary> <para> <para>The identifier of the organization under which the user, group, or resource exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxPermissionListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to return in a single call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxPermissionListCmdlet.NextToken"> <summary> <para> <para>The token to use to retrieve the next page of results. The first call does not contain any tokens.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxPermissionListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Permissions'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListMailboxPermissionsResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListMailboxPermissionsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxPermissionListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EntityId parameter. The -PassThru parameter is deprecated, use -Select '^EntityId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMailboxPermissionListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMMemberListCmdlet"> <summary> Returns an overview of the members of a group. Users and groups can be members of a group.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMemberListCmdlet.GroupId"> <summary> <para> <para>The identifier for the group to which the members (users or groups) are associated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMemberListCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the group exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMemberListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to return in a single call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMemberListCmdlet.NextToken"> <summary> <para> <para> The token to use to retrieve the next page of results. The first call does not contain any tokens.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMemberListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Members'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListGroupMembersResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListGroupMembersResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMemberListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMMemberListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMOrganizationCmdlet"> <summary> Provides more information regarding a given organization based on its identifier. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMOrganizationCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization to be described.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMOrganizationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DescribeOrganizationResponse). Specifying the name of a property of type Amazon.WorkMail.Model.DescribeOrganizationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMOrganizationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the OrganizationId parameter. The -PassThru parameter is deprecated, use -Select '^OrganizationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMOrganizationListCmdlet"> <summary> Returns summaries of the customer's non-deleted organizations.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMOrganizationListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to return in a single call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMOrganizationListCmdlet.NextToken"> <summary> <para> <para>The token to use to retrieve the next page of results. The first call does not contain any tokens.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMOrganizationListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'OrganizationSummaries'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListOrganizationsResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListOrganizationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMOrganizationListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMResourceCmdlet"> <summary> Returns the data available for the resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceCmdlet.OrganizationId"> <summary> <para> <para>The identifier associated with the organization for which the resource is described.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceCmdlet.ResourceId"> <summary> <para> <para>The identifier of the resource to be described.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DescribeResourceResponse). Specifying the name of a property of type Amazon.WorkMail.Model.DescribeResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMResourceListCmdlet"> <summary> Returns summaries of the organization's resources.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceListCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the resources exist.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to return in a single call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceListCmdlet.NextToken"> <summary> <para> <para>The token to use to retrieve the next page of results. The first call does not contain any tokens.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Resources'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListResourcesResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListResourcesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the OrganizationId parameter. The -PassThru parameter is deprecated, use -Select '^OrganizationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMResourceTagCmdlet"> <summary> Lists the tags applied to an Amazon WorkMail organization resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceTagCmdlet.ResourceARN"> <summary> <para> <para>The resource ARN.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListTagsForResourceResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListTagsForResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceARN parameter. The -PassThru parameter is deprecated, use -Select '^ResourceARN' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMUserCmdlet"> <summary> Provides information regarding the user. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the user exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserCmdlet.UserId"> <summary> <para> <para>The identifier for the user to be described.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DescribeUserResponse). Specifying the name of a property of type Amazon.WorkMail.Model.DescribeUserResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the UserId parameter. The -PassThru parameter is deprecated, use -Select '^UserId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.GetWMUserListCmdlet"> <summary> Returns summaries of the organization's users.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserListCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the users exist.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to return in a single call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserListCmdlet.NextToken"> <summary> <para> <para>The token to use to retrieve the next page of results. The first call does not contain any tokens.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Users'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ListUsersResponse). Specifying the name of a property of type Amazon.WorkMail.Model.ListUsersResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the OrganizationId parameter. The -PassThru parameter is deprecated, use -Select '^OrganizationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.GetWMUserListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.NewWMAliasCmdlet"> <summary> Adds an alias to the set of a given member (user or group) of Amazon WorkMail. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMAliasCmdlet.Alias"> <summary> <para> <para>The alias to add to the member set.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMAliasCmdlet.EntityId"> <summary> <para> <para>The member (user or group) to which this alias is added.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMAliasCmdlet.OrganizationId"> <summary> <para> <para>The organization under which the member (user or group) exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMAliasCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.CreateAliasResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMAliasCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Alias parameter. The -PassThru parameter is deprecated, use -Select '^Alias' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMAliasCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.NewWMGroupCmdlet"> <summary> Creates a group that can be used in Amazon WorkMail by calling the <a>RegisterToWorkMail</a> operation. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMGroupCmdlet.Name"> <summary> <para> <para>The name of the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMGroupCmdlet.OrganizationId"> <summary> <para> <para>The organization under which the group is to be created.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'GroupId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.CreateGroupResponse). Specifying the name of a property of type Amazon.WorkMail.Model.CreateGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.NewWMResourceCmdlet"> <summary> Creates a new Amazon WorkMail resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMResourceCmdlet.Name"> <summary> <para> <para>The name of the new resource.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMResourceCmdlet.OrganizationId"> <summary> <para> <para>The identifier associated with the organization for which the resource is created.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMResourceCmdlet.Type"> <summary> <para> <para>The type of the new resource. The available types are <code>equipment</code> and <code>room</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMResourceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ResourceId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.CreateResourceResponse). Specifying the name of a property of type Amazon.WorkMail.Model.CreateResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMResourceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMResourceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.NewWMUserCmdlet"> <summary> Creates a user who can be used in Amazon WorkMail by calling the <a>RegisterToWorkMail</a> operation. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMUserCmdlet.DisplayName"> <summary> <para> <para>The display name for the new user.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMUserCmdlet.Name"> <summary> <para> <para>The name for the new user. Simple AD or AD Connector user names have a maximum length of 20. All others have a maximum length of 64.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMUserCmdlet.OrganizationId"> <summary> <para> <para>The identifier of the organization for which the user is created.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMUserCmdlet.Password"> <summary> <para> <para>The password for the new user.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMUserCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'UserId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.CreateUserResponse). Specifying the name of a property of type Amazon.WorkMail.Model.CreateUserResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMUserCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.NewWMUserCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RegisterWMToWorkMailCmdlet"> <summary> Registers an existing and disabled user, group, or resource for Amazon WorkMail use by associating a mailbox and calendaring capabilities. It performs no change if the user, group, or resource is enabled and fails if the user, group, or resource is deleted. This operation results in the accumulation of costs. For more information, see <a href="https://aws.amazon.com/workmail/pricing">Pricing</a>. The equivalent console functionality for this operation is <i>Enable</i>. <para> Users can either be created by calling the <a>CreateUser</a> API operation or they can be synchronized from your directory. For more information, see <a>DeregisterFromWorkMail</a>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RegisterWMToWorkMailCmdlet.Email"> <summary> <para> <para>The email for the user, group, or resource to be updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RegisterWMToWorkMailCmdlet.EntityId"> <summary> <para> <para>The identifier for the user, group, or resource to be updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RegisterWMToWorkMailCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the user, group, or resource exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RegisterWMToWorkMailCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.RegisterToWorkMailResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RegisterWMToWorkMailCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EntityId parameter. The -PassThru parameter is deprecated, use -Select '^EntityId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RegisterWMToWorkMailCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMAccessControlRuleCmdlet"> <summary> Deletes an access control rule for the specified WorkMail organization. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAccessControlRuleCmdlet.Name"> <summary> <para> <para>The name of the access control rule.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAccessControlRuleCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAccessControlRuleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DeleteAccessControlRuleResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAccessControlRuleCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAccessControlRuleCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMAliasCmdlet"> <summary> Remove one or more specified aliases from a set of aliases for a given user. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAliasCmdlet.Alias"> <summary> <para> <para>The aliases to be removed from the user's set of aliases. Duplicate entries in the list are collapsed into single entries (the list is transformed into a set).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAliasCmdlet.EntityId"> <summary> <para> <para>The identifier for the member (user or group) from which to have the aliases removed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAliasCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the user exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAliasCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DeleteAliasResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAliasCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Alias parameter. The -PassThru parameter is deprecated, use -Select '^Alias' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMAliasCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMDelegateFromResourceCmdlet"> <summary> Removes a member from the resource's set of delegates. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMDelegateFromResourceCmdlet.EntityId"> <summary> <para> <para>The identifier for the member (user, group) to be removed from the resource's delegates.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMDelegateFromResourceCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the resource exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMDelegateFromResourceCmdlet.ResourceId"> <summary> <para> <para>The identifier of the resource from which delegates' set members are removed. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMDelegateFromResourceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DisassociateDelegateFromResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMDelegateFromResourceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EntityId parameter. The -PassThru parameter is deprecated, use -Select '^EntityId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMDelegateFromResourceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMFromWorkMailCmdlet"> <summary> Mark a user, group, or resource as no longer used in Amazon WorkMail. This action disassociates the mailbox and schedules it for clean-up. WorkMail keeps mailboxes for 30 days before they are permanently removed. The functionality in the console is <i>Disable</i>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMFromWorkMailCmdlet.EntityId"> <summary> <para> <para>The identifier for the member (user or group) to be updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMFromWorkMailCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the Amazon WorkMail entity exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMFromWorkMailCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DeregisterFromWorkMailResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMFromWorkMailCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EntityId parameter. The -PassThru parameter is deprecated, use -Select '^EntityId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMFromWorkMailCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMGroupCmdlet"> <summary> Deletes a group from Amazon WorkMail. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMGroupCmdlet.GroupId"> <summary> <para> <para>The identifier of the group to be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMGroupCmdlet.OrganizationId"> <summary> <para> <para>The organization that contains the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DeleteGroupResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMMailboxPermissionCmdlet"> <summary> Deletes permissions granted to a member (user or group). </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMailboxPermissionCmdlet.EntityId"> <summary> <para> <para>The identifier of the member (user or group)that owns the mailbox.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMailboxPermissionCmdlet.GranteeId"> <summary> <para> <para>The identifier of the member (user or group) for which to delete granted permissions.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMailboxPermissionCmdlet.OrganizationId"> <summary> <para> <para>The identifier of the organization under which the member (user or group) exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMailboxPermissionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DeleteMailboxPermissionsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMailboxPermissionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EntityId parameter. The -PassThru parameter is deprecated, use -Select '^EntityId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMailboxPermissionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMMemberFromGroupCmdlet"> <summary> Removes a member from a group. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMemberFromGroupCmdlet.GroupId"> <summary> <para> <para>The identifier for the group from which members are removed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMemberFromGroupCmdlet.MemberId"> <summary> <para> <para>The identifier for the member to be removed to the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMemberFromGroupCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization under which the group exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMemberFromGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DisassociateMemberFromGroupResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMemberFromGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the MemberId parameter. The -PassThru parameter is deprecated, use -Select '^MemberId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMMemberFromGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceCmdlet"> <summary> Deletes the specified resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceCmdlet.OrganizationId"> <summary> <para> <para>The identifier associated with the organization from which the resource is deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceCmdlet.ResourceId"> <summary> <para> <para>The identifier of the resource to be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DeleteResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceTagCmdlet"> <summary> Untags the specified tags from the specified Amazon WorkMail organization resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceTagCmdlet.ResourceARN"> <summary> <para> <para>The resource ARN.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceTagCmdlet.TagKey"> <summary> <para> <para>The tag keys.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.UntagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceARN parameter. The -PassThru parameter is deprecated, use -Select '^ResourceARN' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.RemoveWMUserCmdlet"> <summary> Deletes a user from Amazon WorkMail and all subsequent systems. Before you can delete a user, the user state must be <code>DISABLED</code>. Use the <a>DescribeUser</a> action to confirm the user state. <para> Deleting a user is permanent and cannot be undone. WorkMail archives user mailboxes for 30 days before they are permanently removed. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMUserCmdlet.OrganizationId"> <summary> <para> <para>The organization that contains the user to be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMUserCmdlet.UserId"> <summary> <para> <para>The identifier of the user to be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMUserCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.DeleteUserResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMUserCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the UserId parameter. The -PassThru parameter is deprecated, use -Select '^UserId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.RemoveWMUserCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.ResetWMPasswordCmdlet"> <summary> Allows the administrator to reset the password for a user. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.ResetWMPasswordCmdlet.OrganizationId"> <summary> <para> <para>The identifier of the organization that contains the user for which the password is reset.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.ResetWMPasswordCmdlet.Password"> <summary> <para> <para>The new password for the user.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.ResetWMPasswordCmdlet.UserId"> <summary> <para> <para>The identifier of the user for whom the password is reset.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.ResetWMPasswordCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.ResetPasswordResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.ResetWMPasswordCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the UserId parameter. The -PassThru parameter is deprecated, use -Select '^UserId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.ResetWMPasswordCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.UpdateWMMailboxQuotaCmdlet"> <summary> Updates a user's current mailbox quota for a specified organization and user. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMMailboxQuotaCmdlet.MailboxQuota"> <summary> <para> <para>The updated mailbox quota, in MB, for the specified user.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMMailboxQuotaCmdlet.OrganizationId"> <summary> <para> <para>The identifier for the organization that contains the user for whom to update the mailbox quota.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMMailboxQuotaCmdlet.UserId"> <summary> <para> <para>The identifer for the user for whom to update the mailbox quota.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMMailboxQuotaCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.UpdateMailboxQuotaResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMMailboxQuotaCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the OrganizationId parameter. The -PassThru parameter is deprecated, use -Select '^OrganizationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMMailboxQuotaCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.UpdateWMPrimaryEmailAddressCmdlet"> <summary> Updates the primary email for a user, group, or resource. The current email is moved into the list of aliases (or swapped between an existing alias and the current primary email), and the email provided in the input is promoted as the primary. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMPrimaryEmailAddressCmdlet.Email"> <summary> <para> <para>The value of the email to be updated as primary.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMPrimaryEmailAddressCmdlet.EntityId"> <summary> <para> <para>The user, group, or resource to update.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMPrimaryEmailAddressCmdlet.OrganizationId"> <summary> <para> <para>The organization that contains the user, group, or resource to update.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMPrimaryEmailAddressCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.UpdatePrimaryEmailAddressResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMPrimaryEmailAddressCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Email parameter. The -PassThru parameter is deprecated, use -Select '^Email' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMPrimaryEmailAddressCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.UpdateWMResourceCmdlet"> <summary> Updates data for the resource. To have the latest information, it must be preceded by a <a>DescribeResource</a> call. The dataset in the request should be the one expected when performing another <code>DescribeResource</code> call. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMResourceCmdlet.BookingOption"> <summary> <para> <para>The resource's booking options to be updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMResourceCmdlet.Name"> <summary> <para> <para>The name of the resource to be updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMResourceCmdlet.OrganizationId"> <summary> <para> <para>The identifier associated with the organization for which the resource is updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMResourceCmdlet.ResourceId"> <summary> <para> <para>The identifier of the resource to be updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMResourceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.UpdateResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMResourceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.UpdateWMResourceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet"> <summary> Adds a new access control rule for the specified organization. The rule allows or denies access to the organization for the specified IPv4 addresses, access protocol actions, and user IDs. Adding a new rule with the same name as an existing rule replaces the older rule. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.Action"> <summary> <para> <para>Access protocol actions to include in the rule. Valid values include <code>ActiveSync</code>, <code>AutoDiscover</code>, <code>EWS</code>, <code>IMAP</code>, <code>SMTP</code>, <code>WindowsOutlook</code>, and <code>WebMail</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.Description"> <summary> <para> <para>The rule description.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.Effect"> <summary> <para> <para>The rule effect.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.IpRange"> <summary> <para> <para>IPv4 CIDR ranges to include in the rule.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.Name"> <summary> <para> <para>The rule name.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.NotAction"> <summary> <para> <para>Access protocol actions to exclude from the rule. Valid values include <code>ActiveSync</code>, <code>AutoDiscover</code>, <code>EWS</code>, <code>IMAP</code>, <code>SMTP</code>, <code>WindowsOutlook</code>, and <code>WebMail</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.NotIpRange"> <summary> <para> <para>IPv4 CIDR ranges to exclude from the rule.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.NotUserId"> <summary> <para> <para>User IDs to exclude from the rule.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.OrganizationId"> <summary> <para> <para>The identifier of the organization.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.UserId"> <summary> <para> <para>User IDs to include in the rule.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.PutAccessControlRuleResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMAccessControlRuleCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WM.WriteWMMailboxPermissionCmdlet"> <summary> Sets permissions for a user, group, or resource. This replaces any pre-existing permissions. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMMailboxPermissionCmdlet.EntityId"> <summary> <para> <para>The identifier of the user, group, or resource for which to update mailbox permissions.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMMailboxPermissionCmdlet.GranteeId"> <summary> <para> <para>The identifier of the user, group, or resource to which to grant the permissions.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMMailboxPermissionCmdlet.OrganizationId"> <summary> <para> <para>The identifier of the organization under which the user, group, or resource exists.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMMailboxPermissionCmdlet.PermissionValue"> <summary> <para> <para>The permissions granted to the grantee. SEND_AS allows the grantee to send email as the owner of the mailbox (the grantee is not mentioned on these emails). SEND_ON_BEHALF allows the grantee to send email on behalf of the owner of the mailbox (the grantee is not mentioned as the physical sender of these emails). FULL_ACCESS allows the grantee full access to the mailbox, irrespective of other folder-level permissions set on the mailbox.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMMailboxPermissionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkMail.Model.PutMailboxPermissionsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMMailboxPermissionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EntityId parameter. The -PassThru parameter is deprecated, use -Select '^EntityId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WM.WriteWMMailboxPermissionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |