AWS.Tools.SimpleSystemsManagement

4.1.11.0

AWS.Tools.SimpleSystemsManagement.XML

                                <?xml version="1.0"?>

<doc>

    <assembly>

        <name>AWS.Tools.SimpleSystemsManagement</name>

    </assembly>

    <members>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMLatestEC2ImageCmdlet">

            <summary>

            Retrieves the latest EC2 AMIs (Amazon Machine Images) from AWS Systems Manger parameters by calling Get-SSMParametersByPath or Get-SSMParameterValue.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMLatestEC2ImageCmdlet.Path">

            <summary>

            <para>

            The partial hierarchy for the parameter under the /aws/service/ prefix representing the type of images to list.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMLatestEC2ImageCmdlet.ImageName">

            <summary>

            <para>

            The name of the parameter containing the image information. Wildcard characters '*' and '?' can be used to filter multiple AMIs.

            </para>

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet">

            <summary>

            Retrieve information about one or more parameters in a specific hierarchy. 

             <note><para>

            Request results are returned on a best-effort basis. If you specify <code>MaxResults</code>

            in the request, the response includes information up to the limit specified. The number

            of items returned, however, can be between zero and the value of <code>MaxResults</code>.

            If the service reaches an internal limit while processing the results, it stops the

            operation and returns the matching values up to that point and a <code>NextToken</code>.

            You can specify the <code>NextToken</code> in a subsequent call to get the next set

            of results.

            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet.ParameterFilter">

            <summary>

            <para>

            <para>Filters to limit the request results.</para><note><para>For <code>GetParametersByPath</code>, the following filter <code>Key</code> names

            are supported: <code>Type</code>, <code>KeyId</code>, <code>Label</code>, and <code>DataType</code>.</para><para>The following <code>Key</code> values are not supported for <code>GetParametersByPath</code>:

            <code>tag</code>, <code>Name</code>, <code>Path</code>, and <code>Tier</code>.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet.Path">

            <summary>

            <para>

            <para>The hierarchy for the parameter. Hierarchies start with a forward slash (/). The hierachy

            is the parameter name except the last part of the parameter. For the API call to succeeed,

            the last part of the parameter name cannot be in the path. A parameter name hierarchy

            can have a maximum of 15 levels. Here is an example of a hierarchy: <code>/Finance/Prod/IAD/WinServ2016/license33

            </code></para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet.Recursive">

            <summary>

            <para>

            <para>Retrieve all parameters within a hierarchy.</para><important><para>If a user has access to a path, then the user can access all levels of that path.

            For example, if a user has permission to access path <code>/a</code>, then the user

            can also access <code>/a/b</code>. Even if a user has explicitly been denied access

            in IAM for parameter <code>/a/b</code>, they can still call the GetParametersByPath

            API action recursively for <code>/a</code> and view <code>/a/b</code>.</para></important>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet.WithDecryption">

            <summary>

            <para>

            <para>Retrieve all parameters in a hierarchy with their value decrypted.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>10</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Parameters'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetParametersByPathResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetParametersByPathResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Path parameter.

            The -PassThru parameter is deprecated, use -Select '^Path' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParametersByPathCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.AddSSMResourceTagCmdlet">

            <summary>

            Adds or overwrites one or more tags for the specified resource. Tags are metadata

            that you can assign to your documents, managed instances, maintenance windows, Parameter

            Store parameters, and patch baselines. Tags enable you to categorize your resources

            in different ways, for example, by purpose, owner, or environment. Each tag consists

            of a key and an optional value, both of which you define. For example, you could define

            a set of tags for your account's managed instances that helps you track each instance's

            owner and stack level. For example: Key=Owner and Value=DbAdmin, SysAdmin, or Dev.

            Or Key=Stack and Value=Production, Pre-Production, or Test.

            <para>

            Each resource can have a maximum of 50 tags. 

            </para><para>

            We recommend that you devise a set of tag keys that meets your needs for each resource

            type. Using a consistent set of tag keys makes it easier for you to manage your resources.

            You can search and filter the resources based on the tags you add. Tags don't have

            any semantic meaning to and are interpreted strictly as a string of characters. 

            </para><para>

            For more information about using tags with EC2 instances, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html">Tagging

            your Amazon EC2 resources</a> in the <i>Amazon EC2 User Guide</i>.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.AddSSMResourceTagCmdlet.ResourceId">

            <summary>

            <para>

            <para>The resource ID you want to tag.</para><para>Use the ID of the resource. Here are some examples:</para><para>ManagedInstance: mi-012345abcde</para><para>MaintenanceWindow: mw-012345abcde</para><para>PatchBaseline: pb-012345abcde</para><para>OpsMetadata object: <code>ResourceID</code> for tagging is created from the Amazon

            Resource Name (ARN) for the object. Specifically, <code>ResourceID</code> is created

            from the strings that come after the word <code>opsmetadata</code> in the ARN. For

            example, an OpsMetadata object with an ARN of <code>arn:aws:ssm:us-east-2:1234567890:opsmetadata/aws/ssm/MyGroup/appmanager</code>

            has a <code>ResourceID</code> of either <code>aws/ssm/MyGroup/appmanager</code> or

            <code>/aws/ssm/MyGroup/appmanager</code>.</para><para>For the Document and Parameter values, use the name of the resource.</para><note><para>The ManagedInstance type for this API action is only for on-premises managed instances.

            You must specify the name of the managed instance in the following format: mi-ID_number.

            For example, mi-1a2b3c4d5e6f.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.AddSSMResourceTagCmdlet.ResourceType">

            <summary>

            <para>

            <para>Specifies the type of resource you are tagging.</para><note><para>The ManagedInstance type for this API action is for on-premises managed instances.

            You must specify the name of the managed instance in the following format: mi-ID_number.

            For example, mi-1a2b3c4d5e6f.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.AddSSMResourceTagCmdlet.Tag">

            <summary>

            <para>

            <para>One or more tags. The value parameter is required.</para><important><para>Do not enter personally identifiable information in this field.</para></important>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.AddSSMResourceTagCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.AddTagsToResourceResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.AddSSMResourceTagCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the ResourceId parameter.

            The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.AddSSMResourceTagCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.EditSSMDocumentPermissionCmdlet">

            <summary>

            Shares a Systems Manager document publicly or privately. If you share a document privately,

            you must specify the AWS user account IDs for those people who can use the document.

            If you share a document publicly, you must specify <i>All</i> as the account ID.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.EditSSMDocumentPermissionCmdlet.AccountIdsToAdd">

            <summary>

            <para>

            <para>The AWS user accounts that should have access to the document. The account IDs can

            either be a group of account IDs or <i>All</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.EditSSMDocumentPermissionCmdlet.AccountIdsToRemove">

            <summary>

            <para>

            <para>The AWS user accounts that should no longer have access to the document. The AWS user

            account can either be a group of account IDs or <i>All</i>. This action has a higher

            priority than <i>AccountIdsToAdd</i>. If you specify an account ID to add and the

            same ID to remove, the system removes access to the document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.EditSSMDocumentPermissionCmdlet.Name">

            <summary>

            <para>

            <para>The name of the document that you want to share.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.EditSSMDocumentPermissionCmdlet.PermissionType">

            <summary>

            <para>

            <para>The permission type for the document. The permission type can be <i>Share</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.EditSSMDocumentPermissionCmdlet.SharedDocumentVersion">

            <summary>

            <para>

            <para>(Optional) The version of the document to share. If it's not specified, the system

            choose the <code>Default</code> version to share.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.EditSSMDocumentPermissionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ModifyDocumentPermissionResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.EditSSMDocumentPermissionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.EditSSMDocumentPermissionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMActivationCmdlet">

            <summary>

            Describes details about the activation, such as the date and time the activation was

            created, its expiration date, the IAM role assigned to the instances in the activation,

            and the number of instances registered by using this activation.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMActivationCmdlet.Filter">

            <summary>

            <para>

            <para>A filter to view information about your activations.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMActivationCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMActivationCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMActivationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'ActivationList'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeActivationsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeActivationsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMActivationCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationCmdlet">

            <summary>

            Describes the association for the specified target or instance. If you created the

            association by using the <code>Targets</code> parameter, then you must retrieve the

            association by using the association ID. If you created the association by specifying

            an instance ID and a Systems Manager document, then you retrieve the association by

            specifying the document name and the instance ID.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationCmdlet.AssociationId">

            <summary>

            <para>

            <para>The association ID for which you want information.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationCmdlet.AssociationVersion">

            <summary>

            <para>

            <para>Specify the association version to retrieve. To view the latest version, either specify

            <code>$LATEST</code> for this parameter, or omit this parameter. To view a list of

            all associations for an instance, use <a>ListAssociations</a>. To get a list of versions

            for a specific association, use <a>ListAssociationVersions</a>. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationCmdlet.InstanceId">

            <summary>

            <para>

            <para>The instance ID.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationCmdlet.Name">

            <summary>

            <para>

            <para>The name of the Systems Manager document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AssociationDescription'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeAssociationResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeAssociationResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionCmdlet">

            <summary>

            Use this API action to view all executions for a specific association ID.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionCmdlet.AssociationId">

            <summary>

            <para>

            <para>The association ID for which you want to view execution history details.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionCmdlet.Filter">

            <summary>

            <para>

            <para>Filters for the request. You can specify the following filters and values.</para><para>ExecutionId (EQUAL)</para><para>Status (EQUAL)</para><para>CreatedTime (EQUAL, GREATER_THAN, LESS_THAN)</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AssociationExecutions'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeAssociationExecutionsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeAssociationExecutionsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionTargetCmdlet">

            <summary>

            Use this API action to view information about a specific execution of a specific association.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionTargetCmdlet.AssociationId">

            <summary>

            <para>

            <para>The association ID that includes the execution for which you want to view details.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionTargetCmdlet.ExecutionId">

            <summary>

            <para>

            <para>The execution ID for which you want to view details.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionTargetCmdlet.Filter">

            <summary>

            <para>

            <para>Filters for the request. You can specify the following filters and values.</para><para>Status (EQUAL)</para><para>ResourceId (EQUAL)</para><para>ResourceType (EQUAL)</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionTargetCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionTargetCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionTargetCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AssociationExecutionTargets'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeAssociationExecutionTargetsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeAssociationExecutionTargetsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationExecutionTargetCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationListCmdlet">

            <summary>

            Returns all State Manager associations in the current AWS account and Region. You

            can limit the results to a specific State Manager association document or instance

            by specifying a filter.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationListCmdlet.AssociationFilterList">

            <summary>

            <para>

            <para>One or more filters. Use a filter to return a more specific list of results.</para><note><para>Filtering associations using the <code>InstanceID</code> attribute only returns legacy

            associations created using the <code>InstanceID</code> attribute. Associations targeting

            the instance that are part of the Target Attributes <code>ResourceGroup</code> or

            <code>Tags</code> are not returned.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Associations'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListAssociationsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListAssociationsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the AssociationFilterList parameter.

            The -PassThru parameter is deprecated, use -Select '^AssociationFilterList' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationVersionListCmdlet">

            <summary>

            Retrieves all versions of an association for a specific association ID.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationVersionListCmdlet.AssociationId">

            <summary>

            <para>

            <para>The association ID for which you want to view all versions.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationVersionListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationVersionListCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationVersionListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AssociationVersions'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListAssociationVersionsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListAssociationVersionsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationVersionListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the AssociationId parameter.

            The -PassThru parameter is deprecated, use -Select '^AssociationId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAssociationVersionListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionCmdlet">

            <summary>

            Get detailed information about a particular Automation execution.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionCmdlet.AutomationExecutionId">

            <summary>

            <para>

            <para>The unique identifier for an existing automation execution to examine. The execution

            ID is returned by StartAutomationExecution when the execution of an Automation document

            is initiated.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AutomationExecution'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetAutomationExecutionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetAutomationExecutionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the AutomationExecutionId parameter.

            The -PassThru parameter is deprecated, use -Select '^AutomationExecutionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionListCmdlet">

            <summary>

            Provides details about all active and terminated Automation executions.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionListCmdlet.Filter">

            <summary>

            <para>

            <para>Filters used to limit the scope of executions that are requested.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AutomationExecutionMetadataList'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeAutomationExecutionsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeAutomationExecutionsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationExecutionListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationStepExecutionCmdlet">

            <summary>

            Information about all active and terminated step executions in an Automation workflow.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationStepExecutionCmdlet.AutomationExecutionId">

            <summary>

            <para>

            <para>The Automation execution ID for which you want step execution descriptions.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationStepExecutionCmdlet.Filter">

            <summary>

            <para>

            <para>One or more filters to limit the number of step executions returned by the request.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationStepExecutionCmdlet.ReverseOrder">

            <summary>

            <para>

            <para>A boolean that indicates whether to list step executions in reverse order by start

            time. The default value is 'false'.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationStepExecutionCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationStepExecutionCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationStepExecutionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'StepExecutions'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeAutomationStepExecutionsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeAutomationStepExecutionsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAutomationStepExecutionCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMAvailablePatchCmdlet">

            <summary>

            Lists all patches eligible to be included in a patch baseline.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAvailablePatchCmdlet.Filter">

            <summary>

            <para>

            <para>Filters used to scope down the returned patches.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAvailablePatchCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of patches to return (per page).</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAvailablePatchCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAvailablePatchCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Patches'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeAvailablePatchesResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeAvailablePatchesResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMAvailablePatchCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMCalendarStateCmdlet">

            <summary>

            Gets the state of the AWS Systems Manager Change Calendar at an optional, specified

            time. If you specify a time, <code>GetCalendarState</code> returns the state of the

            calendar at a specific time, and returns the next time that the Change Calendar state

            will transition. If you do not specify a time, <code>GetCalendarState</code> assumes

            the current time. Change Calendar entries have two possible states: <code>OPEN</code>

            or <code>CLOSED</code>.

            <para>

            If you specify more than one calendar in a request, the command returns the status

            of <code>OPEN</code> only if all calendars in the request are open. If one or more

            calendars in the request are closed, the status returned is <code>CLOSED</code>.

            </para><para>

            For more information about Systems Manager Change Calendar, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-change-calendar.html">AWS

            Systems Manager Change Calendar</a> in the <i>AWS Systems Manager User Guide</i>.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCalendarStateCmdlet.AtTime">

            <summary>

            <para>

            <para>(Optional) The specific time for which you want to get calendar state information,

            in <a href="https://en.wikipedia.org/wiki/ISO_8601">ISO 8601</a> format. If you do

            not add <code>AtTime</code>, the current time is assumed.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCalendarStateCmdlet.CalendarName">

            <summary>

            <para>

            <para>The names or Amazon Resource Names (ARNs) of the Systems Manager documents that represent

            the calendar entries for which you want to get the state.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCalendarStateCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetCalendarStateResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetCalendarStateResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCalendarStateCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the AtTime parameter.

            The -PassThru parameter is deprecated, use -Select '^AtTime' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandCmdlet">

            <summary>

            Lists the commands requested by users of the AWS account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandCmdlet.CommandId">

            <summary>

            <para>

            <para>(Optional) If provided, lists only the specified command.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandCmdlet.Filter">

            <summary>

            <para>

            <para>(Optional) One or more filters. Use a filter to return a more specific list of results.

            </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandCmdlet.InstanceId">

            <summary>

            <para>

            <para>(Optional) Lists commands issued against this instance ID.</para><note><para>You can't specify an instance ID in the same command that you specify <code>Status</code>

            = <code>Pending</code>. This is because the command has not reached the instance yet.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandCmdlet.MaxResult">

            <summary>

            <para>

            <para>(Optional) The maximum number of items to return for this call. The call also returns

            a token that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandCmdlet.NextToken">

            <summary>

            <para>

            <para>(Optional) The token for the next set of items to return. (You received this token

            from a previous call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Commands'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListCommandsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListCommandsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet">

            <summary>

            An invocation is copy of a command sent to a specific instance. A command can apply

            to one or more instances. A command invocation applies to one instance. For example,

            if a user runs SendCommand against three instances, then a command invocation is created

            for each requested instance ID. ListCommandInvocations provide status about command

            execution.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet.CommandId">

            <summary>

            <para>

            <para>(Optional) The invocations for a specific command ID.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet.Detail">

            <summary>

            <para>

            <para>(Optional) If set this returns the response of the command executions and any command

            output. The default value is 'false'. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet.Filter">

            <summary>

            <para>

            <para>(Optional) One or more filters. Use a filter to return a more specific list of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet.InstanceId">

            <summary>

            <para>

            <para>(Optional) The command execution details for a specific instance ID.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet.MaxResult">

            <summary>

            <para>

            <para>(Optional) The maximum number of items to return for this call. The call also returns

            a token that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet.NextToken">

            <summary>

            <para>

            <para>(Optional) The token for the next set of items to return. (You received this token

            from a previous call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'CommandInvocations'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListCommandInvocationsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListCommandInvocationsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationDetailCmdlet">

            <summary>

            Returns detailed information about command execution for an invocation or plugin.

            <para><code>GetCommandInvocation</code> only gives the execution status of a plugin in

            a document. To get the command execution status on a specific instance, use <a>ListCommandInvocations</a>.

            To get the command execution status across instances, use <a>ListCommands</a>.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationDetailCmdlet.CommandId">

            <summary>

            <para>

            <para>(Required) The parent command ID of the invocation plugin.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationDetailCmdlet.InstanceId">

            <summary>

            <para>

            <para>(Required) The ID of the managed instance targeted by the command. A managed instance

            can be an Amazon Elastic Compute Cloud (Amazon EC2) instance or an instance in your

            hybrid environment that is configured for AWS Systems Manager.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationDetailCmdlet.PluginName">

            <summary>

            <para>

            <para>The name of the plugin for which you want detailed results. If the document contains

            only one plugin, you can omit the name and details for that plugin. If the document

            contains more than one plugin, you must specify the name of the plugin for which you

            want to view details.</para><para>Plugin names are also referred to as <i>step names</i> in Systems Manager documents.

            For example, <code>aws:RunShellScript</code> is a plugin.</para><para>To find the <code>PluginName</code>, check the document content and find the name

            of the plugin. Alternatively, use <a>ListCommandInvocations</a> with the <code>CommandId</code>

            and <code>Details</code> parameters. The <code>PluginName</code> is the <code>Name</code>

            attribute of the <code>CommandPlugin</code> object in the <code>CommandPlugins</code>

            list.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationDetailCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetCommandInvocationResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetCommandInvocationResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMCommandInvocationDetailCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceItemListCmdlet">

            <summary>

            For a specified resource ID, this API action returns a list of compliance statuses

            for different resource types. Currently, you can only specify one resource ID per

            call. List results depend on the criteria specified in the filter.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceItemListCmdlet.Filter">

            <summary>

            <para>

            <para>One or more compliance filters. Use a filter to return a more specific list of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceItemListCmdlet.ResourceId">

            <summary>

            <para>

            <para>The ID for the resources from which to get compliance information. Currently, you

            can only specify one resource ID.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceItemListCmdlet.ResourceType">

            <summary>

            <para>

            <para>The type of resource from which to get compliance information. Currently, the only

            supported resource type is <code>ManagedInstance</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceItemListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceItemListCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceItemListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'ComplianceItems'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListComplianceItemsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListComplianceItemsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceItemListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceSummaryListCmdlet">

            <summary>

            Returns a summary count of compliant and non-compliant resources for a compliance

            type. For example, this call can return State Manager associations, patches, or custom

            compliance types according to the filter criteria that you specify.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceSummaryListCmdlet.Filter">

            <summary>

            <para>

            <para>One or more compliance or inventory filters. Use a filter to return a more specific

            list of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceSummaryListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. Currently, you can specify null

            or 50. The call also returns a token that you can specify in a subsequent call to

            get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceSummaryListCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceSummaryListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'ComplianceSummaryItems'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListComplianceSummariesResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListComplianceSummariesResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMComplianceSummaryListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMConnectionStatusCmdlet">

            <summary>

            Retrieves the Session Manager connection status for an instance to determine whether

            it is running and ready to receive Session Manager connections.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMConnectionStatusCmdlet.Target">

            <summary>

            <para>

            <para>The ID of the instance.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMConnectionStatusCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetConnectionStatusResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetConnectionStatusResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMConnectionStatusCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Target parameter.

            The -PassThru parameter is deprecated, use -Select '^Target' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMDefaultPatchBaselineCmdlet">

            <summary>

            Retrieves the default patch baseline. Note that Systems Manager supports creating

            multiple default patch baselines. For example, you can create a default patch baseline

            for each operating system.

            <para>

            If you do not specify an operating system value, the default patch baseline for Windows

            is returned.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDefaultPatchBaselineCmdlet.OperatingSystem">

            <summary>

            <para>

            <para>Returns the default patch baseline for the specified operating system.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDefaultPatchBaselineCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetDefaultPatchBaselineResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetDefaultPatchBaselineResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDefaultPatchBaselineCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the OperatingSystem parameter.

            The -PassThru parameter is deprecated, use -Select '^OperatingSystem' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet">

            <summary>

            Retrieves the current snapshot for the patch baseline the instance uses. This API

            is primarily used by the AWS-RunPatchBaseline Systems Manager document.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.BaselineOverride_ApprovedPatch">

            <summary>

            <para>

            <para>A list of explicitly approved patches for the baseline.</para><para>For information about accepted formats for lists of approved patches and rejected

            patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About

            package name formats for approved and rejected patch lists</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.BaselineOverride_ApprovedPatchesComplianceLevel">

            <summary>

            <para>

            <para>Defines the compliance level for approved patches. When an approved patch is reported

            as missing, this value describes the severity of the compliance violation.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.BaselineOverride_ApprovedPatchesEnableNonSecurity">

            <summary>

            <para>

            <para>Indicates whether the list of approved patches includes non-security updates that

            should be applied to the instances. The default value is 'false'. Applies to Linux

            instances only.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.InstanceId">

            <summary>

            <para>

            <para>The ID of the instance for which the appropriate patch snapshot should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.BaselineOverride_OperatingSystem">

            <summary>

            <para>

            <para>The operating system rule used by the patch baseline override.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.GlobalFilters_PatchFilter">

            <summary>

            <para>

            <para>The set of patch filters that make up the group.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.ApprovalRules_PatchRule">

            <summary>

            <para>

            <para>The rules that make up the rule group.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.BaselineOverride_RejectedPatch">

            <summary>

            <para>

            <para>A list of explicitly rejected patches for the baseline.</para><para>For information about accepted formats for lists of approved patches and rejected

            patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About

            package name formats for approved and rejected patch lists</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.BaselineOverride_RejectedPatchesAction">

            <summary>

            <para>

            <para>The action for Patch Manager to take on patches included in the RejectedPackages list.

            A patch can be allowed only if it is a dependency of another package, or blocked entirely

            along with packages that include it as a dependency.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.SnapshotId">

            <summary>

            <para>

            <para>The user-defined snapshot ID.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.BaselineOverride_Source">

            <summary>

            <para>

            <para>Information about the patches to use to update the instances, including target operating

            systems and source repositories. Applies to Linux instances only.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetDeployablePatchSnapshotForInstanceResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetDeployablePatchSnapshotForInstanceResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDeployablePatchSnapshotForInstanceCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SnapshotId parameter.

            The -PassThru parameter is deprecated, use -Select '^SnapshotId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentCmdlet">

            <summary>

            Gets the contents of the specified Systems Manager document.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentCmdlet.DocumentFormat">

            <summary>

            <para>

            <para>Returns the document in the specified format. The document format can be either JSON

            or YAML. JSON is the default format.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The document version for which you want information.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentCmdlet.Name">

            <summary>

            <para>

            <para>The name of the Systems Manager document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentCmdlet.VersionName">

            <summary>

            <para>

            <para>An optional field specifying the version of the artifact associated with the document.

            For example, "Release 12, Update 6". This value is unique across all versions of a

            document and can't be changed.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetDocumentResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetDocumentResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentDescriptionCmdlet">

            <summary>

            Describes the specified Systems Manager document.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentDescriptionCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The document version for which you want information. Can be a specific version or

            the default version.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentDescriptionCmdlet.Name">

            <summary>

            <para>

            <para>The name of the Systems Manager document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentDescriptionCmdlet.VersionName">

            <summary>

            <para>

            <para>An optional field specifying the version of the artifact associated with the document.

            For example, "Release 12, Update 6". This value is unique across all versions of a

            document, and cannot be changed.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentDescriptionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Document'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeDocumentResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeDocumentResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentListCmdlet">

            <summary>

            Returns all Systems Manager (SSM) documents in the current AWS account and Region.

            You can limit the results of this request by using a filter.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentListCmdlet.DocumentFilterList">

            <summary>

            <para>

            <para>This data type is deprecated. Instead, use <code>Filters</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentListCmdlet.Filter">

            <summary>

            <para>

            <para>One or more <code>DocumentKeyValuesFilter</code> objects. Use a filter to return a

            more specific list of results. For keys, you can specify one or more key-value pair

            tags that have been applied to a document. Other valid keys include <code>Owner</code>,

            <code>Name</code>, <code>PlatformTypes</code>, <code>DocumentType</code>, and <code>TargetType</code>.

            For example, to return documents you own use <code>Key=Owner,Values=Self</code>. To

            specify a custom key-value pair, use the format <code>Key=tag:tagName,Values=valueName</code>.</para><note><para>This API action only supports filtering documents by using a single tag key and one

            or more tag values. For example: <code>Key=tag:tagName,Values=valueName1,valueName2</code></para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'DocumentIdentifiers'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListDocumentsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListDocumentsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentMetadataHistoryCmdlet">

            <summary>

            Information about approval reviews for a version of an SSM document.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentMetadataHistoryCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The version of the document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentMetadataHistoryCmdlet.Metadata">

            <summary>

            <para>

            <para>The type of data for which details are being requested. Currently, the only supported

            value is <code>DocumentReviews</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentMetadataHistoryCmdlet.Name">

            <summary>

            <para>

            <para>The name of the document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentMetadataHistoryCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentMetadataHistoryCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentMetadataHistoryCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListDocumentMetadataHistoryResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListDocumentMetadataHistoryResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentMetadataHistoryCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentPermissionCmdlet">

            <summary>

            Describes the permissions for a Systems Manager document. If you created the document,

            you are the owner. If a document is shared, it can either be shared privately (by

            specifying a user's AWS account ID) or publicly (<i>All</i>).<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentPermissionCmdlet.Name">

            <summary>

            <para>

            <para>The name of the document for which you are the owner.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentPermissionCmdlet.PermissionType">

            <summary>

            <para>

            <para>The permission type for the document. The permission type can be <i>Share</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentPermissionCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentPermissionCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentPermissionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AccountIds'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeDocumentPermissionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeDocumentPermissionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentPermissionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentPermissionCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentVersionListCmdlet">

            <summary>

            List all versions for a document.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentVersionListCmdlet.Name">

            <summary>

            <para>

            <para>The name of the document. You can specify an Amazon Resource Name (ARN).</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentVersionListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentVersionListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentVersionListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'DocumentVersions'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListDocumentVersionsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListDocumentVersionsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentVersionListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMDocumentVersionListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectiveInstanceAssociationListCmdlet">

            <summary>

            All associations for the instance(s).<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectiveInstanceAssociationListCmdlet.InstanceId">

            <summary>

            <para>

            <para>The instance ID for which you want to view all associations.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectiveInstanceAssociationListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>5</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectiveInstanceAssociationListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectiveInstanceAssociationListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Associations'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeEffectiveInstanceAssociationsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeEffectiveInstanceAssociationsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectiveInstanceAssociationListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectiveInstanceAssociationListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectivePatchesForPatchBaselineCmdlet">

            <summary>

            Retrieves the current effective patches (the patch and the approval state) for the

            specified patch baseline. Note that this API applies only to Windows patch baselines.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectivePatchesForPatchBaselineCmdlet.BaselineId">

            <summary>

            <para>

            <para>The ID of the patch baseline to retrieve the effective patches for.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectivePatchesForPatchBaselineCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of patches to return (per page).</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectivePatchesForPatchBaselineCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectivePatchesForPatchBaselineCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'EffectivePatches'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeEffectivePatchesForPatchBaselineResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeEffectivePatchesForPatchBaselineResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectivePatchesForPatchBaselineCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the BaselineId parameter.

            The -PassThru parameter is deprecated, use -Select '^BaselineId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMEffectivePatchesForPatchBaselineCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceAssociationsStatusCmdlet">

            <summary>

            The status of the associations for the instance(s).<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceAssociationsStatusCmdlet.InstanceId">

            <summary>

            <para>

            <para>The instance IDs for which you want association status information.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceAssociationsStatusCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceAssociationsStatusCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceAssociationsStatusCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'InstanceAssociationStatusInfos'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeInstanceAssociationsStatusResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeInstanceAssociationsStatusResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceAssociationsStatusCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceAssociationsStatusCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceInformationCmdlet">

            <summary>

            Describes one or more of your instances, including information about the operating

            system platform, the version of SSM Agent installed on the instance, instance status,

            and so on.

            <para>

            If you specify one or more instance IDs, it returns information for those instances.

            If you do not specify instance IDs, it returns information for all your instances.

            If you specify an instance ID that is not valid or an instance that you do not own,

            you receive an error.

            </para><note><para>

            The IamRole field for this API action is the Amazon Identity and Access Management

            (IAM) role assigned to on-premises instances. This call does not return the IAM role

            for EC2 instances.

            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceInformationCmdlet.Filter">

            <summary>

            <para>

            <para>One or more filters. Use a filter to return a more specific list of instances. You

            can filter based on tags applied to EC2 instances. Use this <code>Filters</code> data

            type instead of <code>InstanceInformationFilterList</code>, which is deprecated.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceInformationCmdlet.InstanceInformationFilterList">

            <summary>

            <para>

            <para>This is a legacy method. We recommend that you don't use this method. Instead, use

            the <code>Filters</code> data type. <code>Filters</code> enables you to return instance

            information by filtering based on tags applied to managed instances.</para><note><para>Attempting to use <code>InstanceInformationFilterList</code> and <code>Filters</code>

            leads to an exception error. </para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceInformationCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceInformationCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceInformationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'InstanceInformationList'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeInstanceInformationResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeInstanceInformationResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstanceInformationCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchCmdlet">

            <summary>

            Retrieves information about the patches on the specified instance and their state

            relative to the patch baseline being used for the instance.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchCmdlet.Filter">

            <summary>

            <para>

            <para>An array of structures. Each entry in the array is a structure containing a Key, Value

            combination. Valid values for Key are <code>Classification</code> | <code>KBId</code>

            | <code>Severity</code> | <code>State</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchCmdlet.InstanceId">

            <summary>

            <para>

            <para>The ID of the instance whose patch state information should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of patches to return (per page).</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Patches'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeInstancePatchesResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeInstancePatchesResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStateCmdlet">

            <summary>

            Retrieves the high-level patch state of one or more instances.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStateCmdlet.InstanceId">

            <summary>

            <para>

            <para>The ID of the instance whose patch state information should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStateCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of instances to return (per page).</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStateCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStateCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'InstancePatchStates'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeInstancePatchStatesResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeInstancePatchStatesResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStateCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStatesForPatchGroupCmdlet">

            <summary>

            Retrieves the high-level patch state for the instances in the specified patch group.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStatesForPatchGroupCmdlet.Filter">

            <summary>

            <para>

            <para>Each entry in the array is a structure containing:</para><para>Key (string between 1 and 200 characters)</para><para> Values (array containing a single string)</para><para> Type (string "Equal", "NotEqual", "LessThan", "GreaterThan")</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStatesForPatchGroupCmdlet.PatchGroup">

            <summary>

            <para>

            <para>The name of the patch group for which the patch state information should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStatesForPatchGroupCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of patches to return (per page).</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStatesForPatchGroupCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStatesForPatchGroupCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'InstancePatchStates'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeInstancePatchStatesForPatchGroupResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeInstancePatchStatesForPatchGroupResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStatesForPatchGroupCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the PatchGroup parameter.

            The -PassThru parameter is deprecated, use -Select '^PatchGroup' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInstancePatchStatesForPatchGroupCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryCmdlet">

            <summary>

            Query inventory information.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryCmdlet.Aggregator">

            <summary>

            <para>

            <para>Returns counts of inventory types based on one or more expressions. For example, if

            you aggregate by using an expression that uses the <code>AWS:InstanceInformation.PlatformType</code>

            type, you can see a count of how many Windows and Linux instances exist in your inventoried

            fleet.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryCmdlet.Filter">

            <summary>

            <para>

            <para>One or more filters. Use a filter to return a more specific list of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryCmdlet.ResultAttribute">

            <summary>

            <para>

            <para>The list of inventory item types to return.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Entities'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetInventoryResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetInventoryResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryDeletionListCmdlet">

            <summary>

            Describes a specific delete inventory operation.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryDeletionListCmdlet.DeletionId">

            <summary>

            <para>

            <para>Specify the delete inventory ID for which you want information. This ID was returned

            by the <code>DeleteInventory</code> action.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryDeletionListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryDeletionListCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryDeletionListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'InventoryDeletions'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeInventoryDeletionsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeInventoryDeletionsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryDeletionListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the DeletionId parameter.

            The -PassThru parameter is deprecated, use -Select '^DeletionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryDeletionListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryEntryListCmdlet">

            <summary>

            A list of inventory items returned by the request.<br/><br/>In the AWS.Tools.SimpleSystemsManagement module, this cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryEntryListCmdlet.Filter">

            <summary>

            <para>

            <para>One or more filters. Use a filter to return a more specific list of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryEntryListCmdlet.InstanceId">

            <summary>

            <para>

            <para>The instance ID for which you want inventory information.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryEntryListCmdlet.TypeName">

            <summary>

            <para>

            <para>The type of inventory item for which you want information.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryEntryListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryEntryListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> In the AWS.Tools.SimpleSystemsManagement module, this parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryEntryListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListInventoryEntriesResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListInventoryEntriesResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryEntryListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventoryEntryListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventorySchemaCmdlet">

            <summary>

            Return a list of inventory type names for the account, or return a list of attribute

            names for a specific Inventory item type.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventorySchemaCmdlet.Aggregator">

            <summary>

            <para>

            <para>Returns inventory schemas that support aggregation. For example, this call returns

            the <code>AWS:InstanceInformation</code> type, because it supports aggregation based

            on the <code>PlatformName</code>, <code>PlatformType</code>, and <code>PlatformVersion</code>

            attributes.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventorySchemaCmdlet.SubType">

            <summary>

            <para>

            <para>Returns the sub-type schema for a specified inventory type.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventorySchemaCmdlet.TypeName">

            <summary>

            <para>

            <para>The type of inventory item to return.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventorySchemaCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>200</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventorySchemaCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventorySchemaCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Schemas'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetInventorySchemaResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetInventorySchemaResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventorySchemaCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the TypeName parameter.

            The -PassThru parameter is deprecated, use -Select '^TypeName' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMInventorySchemaCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowCmdlet">

            <summary>

            Retrieves a maintenance window.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window for which you want to retrieve information.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionCmdlet">

            <summary>

            Retrieves details about a specific a maintenance window execution.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionCmdlet.WindowExecutionId">

            <summary>

            <para>

            <para>The ID of the maintenance window execution that includes the task.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowExecutionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowExecutionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowExecutionId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowExecutionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionListCmdlet">

            <summary>

            Lists the executions of a maintenance window. This includes information about when

            the maintenance window was scheduled to be active, and information about tasks registered

            and run with the maintenance window.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionListCmdlet.Filter">

            <summary>

            <para>

            <para>Each entry in the array is a structure containing:</para><para>Key (string, between 1 and 128 characters)</para><para>Values (array of strings, each string is between 1 and 256 characters)</para><para>The supported Keys are ExecutedBefore and ExecutedAfter with the value being a date/time

            string such as 2016-11-04T05:00:00Z.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionListCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window whose executions should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowExecutions'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowExecutionsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowExecutionsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskCmdlet">

            <summary>

            Retrieves the details about a specific task run as part of a maintenance window execution.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskCmdlet.TaskId">

            <summary>

            <para>

            <para>The ID of the specific task execution in the maintenance window task that should be

            retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskCmdlet.WindowExecutionId">

            <summary>

            <para>

            <para>The ID of the maintenance window execution that includes the task.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowExecutionTaskResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowExecutionTaskResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the TaskId parameter.

            The -PassThru parameter is deprecated, use -Select '^TaskId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationCmdlet">

            <summary>

            Retrieves information about a specific task running on a specific target.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationCmdlet.InvocationId">

            <summary>

            <para>

            <para>The invocation ID to retrieve.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationCmdlet.TaskId">

            <summary>

            <para>

            <para>The ID of the specific task in the maintenance window task that should be retrieved.

            </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationCmdlet.WindowExecutionId">

            <summary>

            <para>

            <para>The ID of the maintenance window execution for which the task is a part.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowExecutionTaskInvocationResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowExecutionTaskInvocationResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the TaskId parameter.

            The -PassThru parameter is deprecated, use -Select '^TaskId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationListCmdlet">

            <summary>

            Retrieves the individual task executions (one per target) for a particular task run

            as part of a maintenance window execution.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationListCmdlet.Filter">

            <summary>

            <para>

            <para>Optional filters used to scope down the returned task invocations. The supported filter

            key is STATUS with the corresponding values PENDING, IN_PROGRESS, SUCCESS, FAILED,

            TIMED_OUT, CANCELLING, and CANCELLED.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationListCmdlet.TaskId">

            <summary>

            <para>

            <para>The ID of the specific task in the maintenance window task that should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationListCmdlet.WindowExecutionId">

            <summary>

            <para>

            <para>The ID of the maintenance window execution the task is part of.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowExecutionTaskInvocationIdentities'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowExecutionTaskInvocationsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowExecutionTaskInvocationsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowExecutionId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowExecutionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskInvocationListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskListCmdlet">

            <summary>

            For a given maintenance window execution, lists the tasks that were run.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskListCmdlet.Filter">

            <summary>

            <para>

            <para>Optional filters used to scope down the returned tasks. The supported filter key is

            STATUS with the corresponding values PENDING, IN_PROGRESS, SUCCESS, FAILED, TIMED_OUT,

            CANCELLING, and CANCELLED. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskListCmdlet.WindowExecutionId">

            <summary>

            <para>

            <para>The ID of the maintenance window execution whose task executions should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowExecutionTaskIdentities'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowExecutionTasksResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowExecutionTasksResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowExecutionId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowExecutionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowExecutionTaskListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowListCmdlet">

            <summary>

            Retrieves the maintenance windows in an AWS account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowListCmdlet.Filter">

            <summary>

            <para>

            <para>Optional filters used to narrow down the scope of the returned maintenance windows.

            Supported filter keys are <b>Name</b> and <b>Enabled</b>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowIdentities'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Filter parameter.

            The -PassThru parameter is deprecated, use -Select '^Filter' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowScheduleCmdlet">

            <summary>

            Retrieves information about upcoming executions of a maintenance window.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowScheduleCmdlet.Filter">

            <summary>

            <para>

            <para>Filters used to limit the range of results. For example, you can limit maintenance

            window executions to only those scheduled before or after a certain date and time.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowScheduleCmdlet.ResourceType">

            <summary>

            <para>

            <para>The type of resource you want to retrieve information about. For example, "INSTANCE".</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowScheduleCmdlet.Target">

            <summary>

            <para>

            <para>The instance ID or key/value pair to retrieve information about.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowScheduleCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window to retrieve information about.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowScheduleCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowScheduleCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowScheduleCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'ScheduledWindowExecutions'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowScheduleResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowScheduleResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowScheduleCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowsForTargetCmdlet">

            <summary>

            Retrieves information about the maintenance window targets or tasks that an instance

            is associated with.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowsForTargetCmdlet.ResourceType">

            <summary>

            <para>

            <para>The type of resource you want to retrieve information about. For example, "INSTANCE".</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowsForTargetCmdlet.Target">

            <summary>

            <para>

            <para>The instance ID or key/value pair to retrieve information about.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowsForTargetCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowsForTargetCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowsForTargetCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowIdentities'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowsForTargetResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowsForTargetResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowsForTargetCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTargetCmdlet">

            <summary>

            Lists the targets registered with the maintenance window.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTargetCmdlet.Filter">

            <summary>

            <para>

            <para>Optional filters that can be used to narrow down the scope of the returned window

            targets. The supported filter keys are Type, WindowTargetId and OwnerInformation.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTargetCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window whose targets should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTargetCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTargetCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTargetCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Targets'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowTargetsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowTargetsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTargetCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskCmdlet">

            <summary>

            Lists the tasks in a maintenance window.

             <note><para>

            For maintenance window tasks without a specified target, you cannot supply values

            for <code>--max-errors</code> and <code>--max-concurrency</code>. Instead, the system

            inserts a placeholder value of <code>1</code>, which may be reported in the response

            to this command. These values do not affect the running of your task and can be ignored.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskCmdlet.WindowId">

            <summary>

            <para>

            <para>The maintenance window ID that includes the task to retrieve.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskCmdlet.WindowTaskId">

            <summary>

            <para>

            <para>The maintenance window task ID to retrieve.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowTaskResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetMaintenanceWindowTaskResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowTaskId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowTaskId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskListCmdlet">

            <summary>

            Lists the tasks in a maintenance window.

             <note><para>

            For maintenance window tasks without a specified target, you cannot supply values

            for <code>--max-errors</code> and <code>--max-concurrency</code>. Instead, the system

            inserts a placeholder value of <code>1</code>, which may be reported in the response

            to this command. These values do not affect the running of your task and can be ignored.

            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskListCmdlet.Filter">

            <summary>

            <para>

            <para>Optional filters used to narrow down the scope of the returned tasks. The supported

            filter keys are WindowTaskId, TaskArn, Priority, and TaskType.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskListCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window whose tasks should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Tasks'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowTasksResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeMaintenanceWindowTasksResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskListCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMMaintenanceWindowTaskListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemCmdlet">

            <summary>

            Get information about an OpsItem by using the ID. You must have permission in AWS

            Identity and Access Management (IAM) to view information about an OpsItem. For more

            information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-getting-started.html">Getting

            started with OpsCenter</a> in the <i>AWS Systems Manager User Guide</i>.

            <para>

            Operations engineers and IT professionals use OpsCenter to view, investigate, and

            remediate operational issues impacting the performance and health of their AWS resources.

            For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter.html">AWS

            Systems Manager OpsCenter</a> in the <i>AWS Systems Manager User Guide</i>. 

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemCmdlet.OpsItemId">

            <summary>

            <para>

            <para>The ID of the OpsItem that you want to get.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'OpsItem'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetOpsItemResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetOpsItemResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the OpsItemId parameter.

            The -PassThru parameter is deprecated, use -Select '^OpsItemId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemEventCmdlet">

            <summary>

            Returns a list of all OpsItem events in the current AWS account and Region. You can

            limit the results to events associated with specific OpsItems by specifying a filter.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemEventCmdlet.Filter">

            <summary>

            <para>

            <para>One or more OpsItem filters. Use a filter to return a more specific list of results.

            </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemEventCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemEventCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemEventCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Summaries'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListOpsItemEventsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListOpsItemEventsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemEventCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemSummaryCmdlet">

            <summary>

            Query a set of OpsItems. You must have permission in AWS Identity and Access Management

            (IAM) to query a list of OpsItems. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-getting-started.html">Getting

            started with OpsCenter</a> in the <i>AWS Systems Manager User Guide</i>.

            <para>

            Operations engineers and IT professionals use OpsCenter to view, investigate, and

            remediate operational issues impacting the performance and health of their AWS resources.

            For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter.html">AWS

            Systems Manager OpsCenter</a> in the <i>AWS Systems Manager User Guide</i>. 

            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemSummaryCmdlet.OpsItemFilter">

            <summary>

            <para>

            <para>One or more filters to limit the response.</para><ul><li><para>Key: CreatedTime</para><para>Operations: GreaterThan, LessThan</para></li><li><para>Key: LastModifiedBy</para><para>Operations: Contains, Equals</para></li><li><para>Key: LastModifiedTime</para><para>Operations: GreaterThan, LessThan</para></li><li><para>Key: Priority</para><para>Operations: Equals</para></li><li><para>Key: Source</para><para>Operations: Contains, Equals</para></li><li><para>Key: Status</para><para>Operations: Equals</para></li><li><para>Key: Title</para><para>Operations: Contains</para></li><li><para>Key: OperationalData*</para><para>Operations: Equals</para></li><li><para>Key: OperationalDataKey</para><para>Operations: Equals</para></li><li><para>Key: OperationalDataValue</para><para>Operations: Equals, Contains</para></li><li><para>Key: OpsItemId</para><para>Operations: Equals</para></li><li><para>Key: ResourceId</para><para>Operations: Contains</para></li><li><para>Key: AutomationId</para><para>Operations: Equals</para></li></ul><para>*If you filter the response by using the OperationalData operator, specify a key-value

            pair by using the following JSON format: {"key":"key_name","value":"a_value"}</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemSummaryCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemSummaryCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemSummaryCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'OpsItemSummaries'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeOpsItemsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeOpsItemsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemSummaryCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the OpsItemFilter parameter.

            The -PassThru parameter is deprecated, use -Select '^OpsItemFilter' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsItemSummaryCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataCmdlet">

            <summary>

            View operational metadata related to an application in Application Manager.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataCmdlet.OpsMetadataArn">

            <summary>

            <para>

            <para>The Amazon Resource Name (ARN) of an OpsMetadata Object to view.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetOpsMetadataResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetOpsMetadataResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the OpsMetadataArn parameter.

            The -PassThru parameter is deprecated, use -Select '^OpsMetadataArn' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataListCmdlet">

            <summary>

            Systems Manager calls this API action when displaying all Application Manager OpsMetadata

            objects or blobs.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataListCmdlet.Filter">

            <summary>

            <para>

            <para>One or more filters to limit the number of OpsMetadata objects returned by the call.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataListCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'OpsMetadataList'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListOpsMetadataResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListOpsMetadataResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsMetadataListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet">

            <summary>

            View a summary of OpsItems based on specified filters and aggregators.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet.Aggregator">

            <summary>

            <para>

            <para>Optional aggregators that return counts of OpsItems based on one or more expressions.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet.Filter">

            <summary>

            <para>

            <para>Optional filters used to scope down the returned OpsItems. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet.ResultAttribute">

            <summary>

            <para>

            <para>The OpsItem data type to return.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet.SyncName">

            <summary>

            <para>

            <para>Specify the name of a resource data sync to get.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Entities'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetOpsSummaryResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetOpsSummaryResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Aggregator parameter.

            The -PassThru parameter is deprecated, use -Select '^Aggregator' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMOpsSummaryCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterCmdlet">

            <summary>

            Get information about a parameter by using the parameter name. Don't confuse this

            API action with the <a>GetParameters</a> API action.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterCmdlet.Name">

            <summary>

            <para>

            <para>The name of the parameter you want to query.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterCmdlet.WithDecryption">

            <summary>

            <para>

            <para>Return decrypted values for secure string parameters. This flag is ignored for String

            and StringList parameter types.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Parameter'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetParameterResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetParameterResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterHistoryCmdlet">

            <summary>

            Retrieves the history of all changes to a parameter.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterHistoryCmdlet.Name">

            <summary>

            <para>

            <para>The name of the parameter for which you want to review history.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterHistoryCmdlet.WithDecryption">

            <summary>

            <para>

            <para>Return decrypted values for secure string parameters. This flag is ignored for String

            and StringList parameter types.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterHistoryCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterHistoryCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterHistoryCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Parameters'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetParameterHistoryResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetParameterHistoryResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterHistoryCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterHistoryCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterListCmdlet">

            <summary>

            Get information about a parameter.

             <note><para>

            Request results are returned on a best-effort basis. If you specify <code>MaxResults</code>

            in the request, the response includes information up to the limit specified. The number

            of items returned, however, can be between zero and the value of <code>MaxResults</code>.

            If the service reaches an internal limit while processing the results, it stops the

            operation and returns the matching values up to that point and a <code>NextToken</code>.

            You can specify the <code>NextToken</code> in a subsequent call to get the next set

            of results.

            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterListCmdlet.Filter">

            <summary>

            <para>

            <para>This data type is deprecated. Instead, use <code>ParameterFilters</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterListCmdlet.ParameterFilter">

            <summary>

            <para>

            <para>Filters to limit the request results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterListCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Parameters'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeParametersResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeParametersResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterValueCmdlet">

            <summary>

            Get details of a parameter. Don't confuse this API action with the <a>GetParameter</a>

            API action.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterValueCmdlet.Name">

            <summary>

            <para>

            <para>Names of the parameters for which you want to query information.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterValueCmdlet.WithDecryption">

            <summary>

            <para>

            <para>Return decrypted secure string value. Return decrypted values for secure string parameters.

            This flag is ignored for String and StringList parameter types.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMParameterValueCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetParametersResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetParametersResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineCmdlet">

            <summary>

            Lists the patch baselines in your AWS account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineCmdlet.Filter">

            <summary>

            <para>

            <para>Each element in the array is a structure containing: </para><para>Key: (string, "NAME_PREFIX" or "OWNER")</para><para>Value: (array of strings, exactly 1 entry, between 1 and 255 characters)</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of patch baselines to return (per page).</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'BaselineIdentities'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribePatchBaselinesResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribePatchBaselinesResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineDetailCmdlet">

            <summary>

            Retrieves information about a patch baseline.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineDetailCmdlet.BaselineId">

            <summary>

            <para>

            <para>The ID of the patch baseline to retrieve.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineDetailCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetPatchBaselineResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetPatchBaselineResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineDetailCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the BaselineId parameter.

            The -PassThru parameter is deprecated, use -Select '^BaselineId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineForPatchGroupCmdlet">

            <summary>

            Retrieves the patch baseline that should be used for the specified patch group.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineForPatchGroupCmdlet.OperatingSystem">

            <summary>

            <para>

            <para>Returns he operating system rule specified for patch groups using the patch baseline.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineForPatchGroupCmdlet.PatchGroup">

            <summary>

            <para>

            <para>The name of the patch group whose patch baseline should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchBaselineForPatchGroupCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetPatchBaselineForPatchGroupResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetPatchBaselineForPatchGroupResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupCmdlet">

            <summary>

            Lists all patch groups that have been registered with patch baselines.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupCmdlet.Filter">

            <summary>

            <para>

            <para>One or more filters. Use a filter to return a more specific list of results.</para><para>For <code>DescribePatchGroups</code>,valid filter keys include the following:</para><ul><li><para><code>NAME_PREFIX</code>: The name of the patch group. Wildcards (*) are accepted.</para></li><li><para><code>OPERATING_SYSTEM</code>: The supported operating system type to return results

            for. For valid operating system values, see <a>GetDefaultPatchBaselineRequest$OperatingSystem</a>

            in <a>CreatePatchBaseline</a>.</para><para>Examples:</para><ul><li><para><code>--filters Key=NAME_PREFIX,Values=MyPatchGroup*</code></para></li><li><para><code>--filters Key=OPERATING_SYSTEM,Values=AMAZON_LINUX_2</code></para></li></ul></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of patch groups to return (per page).</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Mappings'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribePatchGroupsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribePatchGroupsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Filter parameter.

            The -PassThru parameter is deprecated, use -Select '^Filter' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupStateCmdlet">

            <summary>

            Returns high-level aggregated patch compliance state for a patch group.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupStateCmdlet.PatchGroup">

            <summary>

            <para>

            <para>The name of the patch group whose patch snapshot should be retrieved.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupStateCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribePatchGroupStateResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribePatchGroupStateResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchGroupStateCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the PatchGroup parameter.

            The -PassThru parameter is deprecated, use -Select '^PatchGroup' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchPropertyCmdlet">

            <summary>

            Lists the properties of available patches organized by product, product family, classification,

            severity, and other properties of available patches. You can use the reported properties

            in the filters you specify in requests for actions such as <a>CreatePatchBaseline</a>,

            <a>UpdatePatchBaseline</a>, <a>DescribeAvailablePatches</a>, and <a>DescribePatchBaselines</a>.

            <para>

            The following section lists the properties that can be used in filters for each major

            operating system type:

            </para><dl><dt>AMAZON_LINUX</dt><dd><para>

            Valid properties: PRODUCT, CLASSIFICATION, SEVERITY

            </para></dd><dt>AMAZON_LINUX_2</dt><dd><para>

            Valid properties: PRODUCT, CLASSIFICATION, SEVERITY

            </para></dd><dt>CENTOS</dt><dd><para>

            Valid properties: PRODUCT, CLASSIFICATION, SEVERITY

            </para></dd><dt>DEBIAN</dt><dd><para>

            Valid properties: PRODUCT, PRIORITY

            </para></dd><dt>MACOS</dt><dd><para>

            Valid properties: PRODUCT, CLASSIFICATION

            </para></dd><dt>ORACLE_LINUX</dt><dd><para>

            Valid properties: PRODUCT, CLASSIFICATION, SEVERITY

            </para></dd><dt>REDHAT_ENTERPRISE_LINUX</dt><dd><para>

            Valid properties: PRODUCT, CLASSIFICATION, SEVERITY

            </para></dd><dt>SUSE</dt><dd><para>

            Valid properties: PRODUCT, CLASSIFICATION, SEVERITY

            </para></dd><dt>UBUNTU</dt><dd><para>

            Valid properties: PRODUCT, PRIORITY

            </para></dd><dt>WINDOWS</dt><dd><para>

            Valid properties: PRODUCT, PRODUCT_FAMILY, CLASSIFICATION, MSRC_SEVERITY

            </para></dd></dl><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchPropertyCmdlet.OperatingSystem">

            <summary>

            <para>

            <para>The operating system type for which to list patches.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchPropertyCmdlet.PatchSet">

            <summary>

            <para>

            <para>Indicates whether to list patches for the Windows operating system or for Microsoft

            applications. Not applicable for the Linux or macOS operating systems.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchPropertyCmdlet.Property">

            <summary>

            <para>

            <para>The patch property for which you want to view patch details. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchPropertyCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchPropertyCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchPropertyCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Properties'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribePatchPropertiesResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribePatchPropertiesResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchPropertyCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Property parameter.

            The -PassThru parameter is deprecated, use -Select '^Property' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMPatchPropertyCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceComplianceSummaryListCmdlet">

            <summary>

            Returns a resource-level summary count. The summary includes information about compliant

            and non-compliant statuses and detailed compliance-item severity counts, according

            to the filter criteria you specify.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceComplianceSummaryListCmdlet.Filter">

            <summary>

            <para>

            <para>One or more filters. Use a filter to return a more specific list of results.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceComplianceSummaryListCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceComplianceSummaryListCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceComplianceSummaryListCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'ResourceComplianceSummaryItems'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListResourceComplianceSummariesResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListResourceComplianceSummariesResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceComplianceSummaryListCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceDataSyncCmdlet">

            <summary>

            Lists your resource data sync configurations. Includes information about the last

            time a sync attempted to start, the last sync status, and the last time a sync successfully

            completed.

            <para>

            The number of sync configurations might be too large to return using a single call

            to <code>ListResourceDataSync</code>. You can limit the number of sync configurations

            returned by using the <code>MaxResults</code> parameter. To determine whether there

            are more sync configurations to list, check the value of <code>NextToken</code> in

            the output. If there are more sync configurations to list, you can request them by

            specifying the <code>NextToken</code> returned in the call to the parameter of a subsequent

            call. 

            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceDataSyncCmdlet.SyncType">

            <summary>

            <para>

            <para>View a list of resource data syncs according to the sync type. Specify <code>SyncToDestination</code>

            to view resource data syncs that synchronize data to an Amazon S3 bucket. Specify

            <code>SyncFromSource</code> to view resource data syncs from AWS Organizations or

            from multiple AWS Regions.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceDataSyncCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceDataSyncCmdlet.NextToken">

            <summary>

            <para>

            <para>A token to start the list. Use this token to get the next set of results. </para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceDataSyncCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'ResourceDataSyncItems'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListResourceDataSyncResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListResourceDataSyncResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceDataSyncCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SyncType parameter.

            The -PassThru parameter is deprecated, use -Select '^SyncType' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceDataSyncCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceTagCmdlet">

            <summary>

            Returns a list of the tags assigned to the specified resource.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceTagCmdlet.ResourceId">

            <summary>

            <para>

            <para>The resource ID for which you want to see a list of tags.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceTagCmdlet.ResourceType">

            <summary>

            <para>

            <para>Returns a list of tags for a specific resource type.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceTagCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'TagList'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ListTagsForResourceResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ListTagsForResourceResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMResourceTagCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the ResourceId parameter.

            The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMServiceSettingCmdlet">

            <summary>

            <code>ServiceSetting</code> is an account-level setting for an AWS service. This

            setting defines how a user interacts with or uses a service or a feature of a service.

            For example, if an AWS service charges money to the account based on feature or service

            usage, then the AWS service team might create a default setting of "false". This means

            the user can't use this feature unless they change the setting to "true" and intentionally

            opt in for a paid feature.

            <para>

            Services map a <code>SettingId</code> object to a setting value. AWS services teams

            define the default value for a <code>SettingId</code>. You can't create a new <code>SettingId</code>,

            but you can overwrite the default value if you have the <code>ssm:UpdateServiceSetting</code>

            permission for the setting. Use the <a>UpdateServiceSetting</a> API action to change

            the default setting. Or use the <a>ResetServiceSetting</a> to change the value back

            to the original value defined by the AWS service team.

            </para><para>

            Query the current service setting for the account. 

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMServiceSettingCmdlet.SettingId">

            <summary>

            <para>

            <para>The ID of the service setting to get. The setting ID can be <code>/ssm/automation/customer-script-log-destination</code>,

            <code>/ssm/automation/customer-script-log-group-name</code>, <code>/ssm/parameter-store/default-parameter-tier</code>,

            <code>/ssm/parameter-store/high-throughput-enabled</code>, or <code>/ssm/managed-instance/activation-tier</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMServiceSettingCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'ServiceSetting'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.GetServiceSettingResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.GetServiceSettingResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMServiceSettingCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SettingId parameter.

            The -PassThru parameter is deprecated, use -Select '^SettingId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.GetSSMSessionCmdlet">

            <summary>

            Retrieves a list of all active sessions (both connected and disconnected) or terminated

            sessions from the past 30 days.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMSessionCmdlet.Filter">

            <summary>

            <para>

            <para>One or more filters to limit the type of sessions returned by the request.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMSessionCmdlet.State">

            <summary>

            <para>

            <para>The session status to retrieve a list of sessions for. For example, "Active".</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMSessionCmdlet.MaxResult">

            <summary>

            <para>

            <para>The maximum number of items to return for this call. The call also returns a token

            that you can specify in a subsequent call to get the next set of results.</para>

            </para>

            <para>

            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.

            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.

            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

            </para>

            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMSessionCmdlet.NextToken">

            <summary>

            <para>

            <para>The token for the next set of items to return. (You received this token from a previous

            call.)</para>

            </para>

            <para>

            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.

            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMSessionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Sessions'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DescribeSessionsResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DescribeSessionsResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.GetSSMSessionCmdlet.NoAutoIteration">

            <summary>

            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple

            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken

            as the start point.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.NewSSMActivationCmdlet">

            <summary>

            Generates an activation code and activation ID you can use to register your on-premises

            server or virtual machine (VM) with Systems Manager. Registering these machines with

            Systems Manager makes it possible to manage them using Systems Manager capabilities.

            You use the activation code and ID when installing SSM Agent on machines in your hybrid

            environment. For more information about requirements for managing on-premises instances

            and VMs using Systems Manager, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-managedinstances.html">Setting

            up AWS Systems Manager for hybrid environments</a> in the <i>AWS Systems Manager User

            Guide</i>. 

             <note><para>

            On-premises servers or VMs that are registered with Systems Manager and EC2 instances

            that you manage with Systems Manager are all called <i>managed instances</i>.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMActivationCmdlet.DefaultInstanceName">

            <summary>

            <para>

            <para>The name of the registered, managed instance as it will appear in the Systems Manager

            console or when you use the AWS command line tools to list Systems Manager resources.</para><important><para>Do not enter personally identifiable information in this field.</para></important>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMActivationCmdlet.Description">

            <summary>

            <para>

            <para>A user-defined description of the resource that you want to register with Systems

            Manager. </para><important><para>Do not enter personally identifiable information in this field.</para></important>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMActivationCmdlet.ExpirationDate">

            <summary>

            <para>

            <para>The date by which this activation request should expire, in timestamp format, such

            as "2021-07-07T00:00:00". You can specify a date up to 30 days in advance. If you

            don't provide an expiration date, the activation code expires in 24 hours.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMActivationCmdlet.IamRole">

            <summary>

            <para>

            <para>The Amazon Identity and Access Management (IAM) role that you want to assign to the

            managed instance. This IAM role must provide AssumeRole permissions for the Systems

            Manager service principal <code>ssm.amazonaws.com</code>. For more information, see

            <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-service-role.html">Create

            an IAM service role for a hybrid environment</a> in the <i>AWS Systems Manager User

            Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMActivationCmdlet.RegistrationLimit">

            <summary>

            <para>

            <para>Specify the maximum number of managed instances you want to register. The default

            value is 1 instance.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMActivationCmdlet.Tag">

            <summary>

            <para>

            <para>Optional metadata that you assign to a resource. Tags enable you to categorize a resource

            in different ways, such as by purpose, owner, or environment. For example, you might

            want to tag an activation to identify which servers or virtual machines (VMs) in your

            on-premises environment you intend to activate. In this case, you could specify the

            following key name/value pairs:</para><ul><li><para><code>Key=OS,Value=Windows</code></para></li><li><para><code>Key=Environment,Value=Production</code></para></li></ul><important><para>When you install SSM Agent on your on-premises servers and VMs, you specify an activation

            ID and code. When you specify the activation ID and code, tags assigned to the activation

            are automatically applied to the on-premises servers or VMs.</para></important><para>You can't add tags to or delete tags from an existing activation. You can tag your

            on-premises servers and VMs after they connect to Systems Manager for the first time

            and are assigned a managed instance ID. This means they are listed in the AWS Systems

            Manager console with an ID that is prefixed with "mi-". For information about how

            to add tags to your managed instances, see <a>AddTagsToResource</a>. For information

            about how to remove tags from your managed instances, see <a>RemoveTagsFromResource</a>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMActivationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CreateActivationResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.CreateActivationResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMActivationCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet">

            <summary>

            A State Manager association defines the state that you want to maintain on your instances.

            For example, an association can specify that anti-virus software must be installed

            and running on your instances, or that certain ports must be closed. For static targets,

            the association specifies a schedule for when the configuration is reapplied. For

            dynamic targets, such as an AWS Resource Group or an AWS Autoscaling Group, State

            Manager applies the configuration when new instances are added to the group. The association

            also specifies actions to take when applying the configuration. For example, an association

            for anti-virus software might run once a day. If the software is not installed, then

            State Manager installs it. If the software is installed, but the service is not running,

            then the association might instruct State Manager to start the service.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.ApplyOnlyAtCronInterval">

            <summary>

            <para>

            <para>By default, when you create a new associations, the system runs it immediately after

            it is created and then according to the schedule you specified. Specify this option

            if you don't want an association to run immediately after you create it. This parameter

            is not supported for rate expressions.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.AssociationName">

            <summary>

            <para>

            <para>Specify a descriptive name for the association.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.AutomationTargetParameterName">

            <summary>

            <para>

            <para>Specify the target for the association. This target is required for associations that

            use an Automation document and target resources by using rate controls.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.ComplianceSeverity">

            <summary>

            <para>

            <para>The severity level to assign to the association.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The document version you want to associate with the target(s). Can be a specific version

            or the default version.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.InstanceId">

            <summary>

            <para>

            <para>The instance ID.</para><note><para><code>InstanceId</code> has been deprecated. To specify an instance ID for an association,

            use the <code>Targets</code> parameter. Requests that include the parameter <code>InstanceID</code>

            with SSM documents that use schema version 2.0 or later will fail. In addition, if

            you use the parameter <code>InstanceId</code>, you cannot use the parameters <code>AssociationName</code>,

            <code>DocumentVersion</code>, <code>MaxErrors</code>, <code>MaxConcurrency</code>,

            <code>OutputLocation</code>, or <code>ScheduleExpression</code>. To use these parameters,

            you must use the <code>Targets</code> parameter.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.MaxConcurrency">

            <summary>

            <para>

            <para>The maximum number of targets allowed to run the association at the same time. You

            can specify a number, for example 10, or a percentage of the target set, for example

            10%. The default value is 100%, which means all targets run the association at the

            same time.</para><para>If a new instance starts and attempts to run an association while Systems Manager

            is running MaxConcurrency associations, the association is allowed to run. During

            the next association interval, the new instance will process its association within

            the limit specified for MaxConcurrency.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.MaxError">

            <summary>

            <para>

            <para>The number of errors that are allowed before the system stops sending requests to

            run the association on additional targets. You can specify either an absolute number

            of errors, for example 10, or a percentage of the target set, for example 10%. If

            you specify 3, for example, the system stops sending requests when the fourth error

            is received. If you specify 0, then the system stops sending requests after the first

            error is returned. If you run an association on 50 instances and set MaxError to 10%,

            then the system stops sending the request when the sixth error is received.</para><para>Executions that are already running an association when MaxErrors is reached are allowed

            to complete, but some of these executions may fail as well. If you need to ensure

            that there won't be more than max-errors failed executions, set MaxConcurrency to

            1 so that executions proceed one at a time.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.Name">

            <summary>

            <para>

            <para>The name of the SSM document that contains the configuration information for the instance.

            You can specify Command or Automation documents.</para><para>You can specify AWS-predefined documents, documents you created, or a document that

            is shared with you from another account.</para><para>For SSM documents that are shared with you from other AWS accounts, you must specify

            the complete SSM document ARN, in the following format:</para><para><code>arn:<i>partition</i>:ssm:<i>region</i>:<i>account-id</i>:document/<i>document-name</i></code></para><para>For example:</para><para><code>arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document</code></para><para>For AWS-predefined documents and SSM documents you created in your account, you only

            need to specify the document name. For example, <code>AWS-ApplyPatchBaseline</code>

            or <code>My-Document</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.S3Location_OutputS3BucketName">

            <summary>

            <para>

            <para>The name of the S3 bucket.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.S3Location_OutputS3KeyPrefix">

            <summary>

            <para>

            <para>The S3 bucket subfolder.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.S3Location_OutputS3Region">

            <summary>

            <para>

            <para>(Deprecated) You can no longer specify this parameter. The system ignores it. Instead,

            Systems Manager automatically determines the Region of the S3 bucket.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.Parameter">

            <summary>

            <para>

            <para>The parameters for the runtime configuration of the document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.ScheduleExpression">

            <summary>

            <para>

            <para>A cron expression when the association will be applied to the target(s).</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.SyncCompliance">

            <summary>

            <para>

            <para>The mode for generating association compliance. You can specify <code>AUTO</code>

            or <code>MANUAL</code>. In <code>AUTO</code> mode, the system uses the status of the

            association execution to determine the compliance status. If the association execution

            runs successfully, then the association is <code>COMPLIANT</code>. If the association

            execution doesn't run successfully, the association is <code>NON-COMPLIANT</code>.</para><para>In <code>MANUAL</code> mode, you must specify the <code>AssociationId</code> as a

            parameter for the <a>PutComplianceItems</a> API action. In this case, compliance data

            is not managed by State Manager. It is managed by your direct call to the <a>PutComplianceItems</a>

            API action.</para><para>By default, all associations use <code>AUTO</code> mode.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.TargetLocation">

            <summary>

            <para>

            <para>A location is a combination of AWS Regions and AWS accounts where you want to run

            the association. Use this action to create an association in multiple Regions and

            multiple accounts.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.Target">

            <summary>

            <para>

            <para>The targets for the association. You can target instances by using tags, AWS Resource

            Groups, all instances in an AWS account, or individual instance IDs. For more information

            about choosing targets for an association, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-state-manager-targets-and-rate-controls.html">Using

            targets and rate controls with State Manager associations</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AssociationDescription'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CreateAssociationResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.CreateAssociationResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationFromBatchCmdlet">

            <summary>

            Associates the specified Systems Manager document with the specified instances or

            targets.

            <para>

            When you associate a document with one or more instances using instance IDs or tags,

            SSM Agent running on the instance processes the document and configures the instance

            as specified.

            </para><para>

            If you associate a document with an instance that already has an associated document,

            the system returns the AssociationAlreadyExists exception.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationFromBatchCmdlet.Entry">

            <summary>

            <para>

            <para>One or more associations.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationFromBatchCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CreateAssociationBatchResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.CreateAssociationBatchResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationFromBatchCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Entry parameter.

            The -PassThru parameter is deprecated, use -Select '^Entry' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMAssociationFromBatchCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet">

            <summary>

            Creates a Systems Manager (SSM) document. An SSM document defines the actions that

            Systems Manager performs on your managed instances. For more information about SSM

            documents, including information about supported schemas, features, and syntax, see

            <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-ssm-docs.html">AWS

            Systems Manager Documents</a> in the <i>AWS Systems Manager User Guide</i>.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.Attachment">

            <summary>

            <para>

            <para>A list of key and value pairs that describe attachments to a version of a document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.Content">

            <summary>

            <para>

            <para>The content for the new SSM document in JSON or YAML format. We recommend storing

            the contents for your new document in an external JSON or YAML file and referencing

            the file in a command.</para><para>For examples, see the following topics in the <i>AWS Systems Manager User Guide</i>.</para><ul><li><para><a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/create-ssm-document-api.html">Create

            an SSM document (AWS API)</a></para></li><li><para><a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/create-ssm-document-cli.html">Create

            an SSM document (AWS CLI)</a></para></li><li><para><a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/create-ssm-document-api.html">Create

            an SSM document (API)</a></para></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.DocumentFormat">

            <summary>

            <para>

            <para>Specify the document format for the request. The document format can be JSON, YAML,

            or TEXT. JSON is the default format.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.DocumentType">

            <summary>

            <para>

            <para>The type of document to create.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.Name">

            <summary>

            <para>

            <para>A name for the Systems Manager document.</para><important><para>You can't use the following strings as document name prefixes. These are reserved

            by AWS for use as document name prefixes:</para><ul><li><para><code>aws-</code></para></li><li><para><code>amazon</code></para></li><li><para><code>amzn</code></para></li></ul></important>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.Require">

            <summary>

            <para>

            <para>A list of SSM documents required by a document. This parameter is used exclusively

            by AWS AppConfig. When a user creates an AppConfig configuration in an SSM document,

            the user must also specify a required document for validation purposes. In this case,

            an <code>ApplicationConfiguration</code> document requires an <code>ApplicationConfigurationSchema</code>

            document for validation purposes. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/appconfig.html">AWS

            AppConfig</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.Tag">

            <summary>

            <para>

            <para>Optional metadata that you assign to a resource. Tags enable you to categorize a resource

            in different ways, such as by purpose, owner, or environment. For example, you might

            want to tag an SSM document to identify the types of targets or the environment where

            it will run. In this case, you could specify the following key name/value pairs:</para><ul><li><para><code>Key=OS,Value=Windows</code></para></li><li><para><code>Key=Environment,Value=Production</code></para></li></ul><note><para>To add tags to an existing SSM document, use the <a>AddTagsToResource</a> action.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.TargetType">

            <summary>

            <para>

            <para>Specify a target type to define the kinds of resources the document can run on. For

            example, to run a document on EC2 instances, specify the following value: /AWS::EC2::Instance.

            If you specify a value of '/' the document can run on all types of resources. If you

            don't specify a value, the document can't run on any resources. For a list of valid

            resource types, see <a href="http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-template-resource-type-ref.html">AWS

            resource and property types reference</a> in the <i>AWS CloudFormation User Guide</i>.

            </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.VersionName">

            <summary>

            <para>

            <para>An optional field specifying the version of the artifact you are creating with the

            document. For example, "Release 12, Update 6". This value is unique across all versions

            of a document, and cannot be changed.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'DocumentDescription'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CreateDocumentResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.CreateDocumentResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Content parameter.

            The -PassThru parameter is deprecated, use -Select '^Content' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMDocumentCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet">

            <summary>

            Creates a new maintenance window.

             <note><para>

            The value you specify for <code>Duration</code> determines the specific end time for

            the maintenance window based on the time it begins. No maintenance window tasks are

            permitted to start after the resulting endtime minus the number of hours you specify

            for <code>Cutoff</code>. For example, if the maintenance window starts at 3 PM, the

            duration is three hours, and the value you specify for <code>Cutoff</code> is one

            hour, no maintenance window tasks can start after 5 PM.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.AllowUnassociatedTarget">

            <summary>

            <para>

            <para>Enables a maintenance window task to run on managed instances, even if you have not

            registered those instances as targets. If enabled, then you must specify the unregistered

            instances (by instance ID) when you register a task with the maintenance window.</para><para>If you don't enable this option, then you must specify previously-registered targets

            when you register a task with the maintenance window.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.Cutoff">

            <summary>

            <para>

            <para>The number of hours before the end of the maintenance window that Systems Manager

            stops scheduling new tasks for execution.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.Description">

            <summary>

            <para>

            <para>An optional description for the maintenance window. We recommend specifying a description

            to help you organize your maintenance windows. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.Duration">

            <summary>

            <para>

            <para>The duration of the maintenance window in hours.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.EndDate">

            <summary>

            <para>

            <para>The date and time, in ISO-8601 Extended format, for when you want the maintenance

            window to become inactive. EndDate allows you to set a date and time in the future

            when the maintenance window will no longer run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.Name">

            <summary>

            <para>

            <para>The name of the maintenance window.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.Schedule">

            <summary>

            <para>

            <para>The schedule of the maintenance window in the form of a cron or rate expression.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.ScheduleOffset">

            <summary>

            <para>

            <para>The number of days to wait after the date and time specified by a CRON expression

            before running the maintenance window.</para><para>For example, the following cron expression schedules a maintenance window to run on

            the third Tuesday of every month at 11:30 PM.</para><para><code>cron(30 23 ? * TUE#3 *)</code></para><para>If the schedule offset is <code>2</code>, the maintenance window won't run until two

            days later.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.ScheduleTimezone">

            <summary>

            <para>

            <para>The time zone that the scheduled maintenance window executions are based on, in Internet

            Assigned Numbers Authority (IANA) format. For example: "America/Los_Angeles", "UTC",

            or "Asia/Seoul". For more information, see the <a href="https://www.iana.org/time-zones">Time

            Zone Database</a> on the IANA website.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.StartDate">

            <summary>

            <para>

            <para>The date and time, in ISO-8601 Extended format, for when you want the maintenance

            window to become active. StartDate allows you to delay activation of the maintenance

            window until the specified future date.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.Tag">

            <summary>

            <para>

            <para>Optional metadata that you assign to a resource. Tags enable you to categorize a resource

            in different ways, such as by purpose, owner, or environment. For example, you might

            want to tag a maintenance window to identify the type of tasks it will run, the types

            of targets, and the environment it will run in. In this case, you could specify the

            following key name/value pairs:</para><ul><li><para><code>Key=TaskType,Value=AgentUpdate</code></para></li><li><para><code>Key=OS,Value=Windows</code></para></li><li><para><code>Key=Environment,Value=Production</code></para></li></ul><note><para>To add tags to an existing maintenance window, use the <a>AddTagsToResource</a> action.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.ClientToken">

            <summary>

            <para>

            <para>User-provided idempotency token.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CreateMaintenanceWindowResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.CreateMaintenanceWindowResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMMaintenanceWindowCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet">

            <summary>

            Creates a new OpsItem. You must have permission in AWS Identity and Access Management

            (IAM) to create a new OpsItem. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-getting-started.html">Getting

            started with OpsCenter</a> in the <i>AWS Systems Manager User Guide</i>.

            <para>

            Operations engineers and IT professionals use OpsCenter to view, investigate, and

            remediate operational issues impacting the performance and health of their AWS resources.

            For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter.html">AWS

            Systems Manager OpsCenter</a> in the <i>AWS Systems Manager User Guide</i>. 

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.ActualEndTime">

            <summary>

            <para>

            <para>The time a runbook workflow ended. Currently reported only for the OpsItem type <code>/aws/changerequest</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.ActualStartTime">

            <summary>

            <para>

            <para>The time a runbook workflow started. Currently reported only for the OpsItem type

            <code>/aws/changerequest</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Category">

            <summary>

            <para>

            <para>Specify a category to assign to an OpsItem. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Description">

            <summary>

            <para>

            <para>Information about the OpsItem. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Notification">

            <summary>

            <para>

            <para>The Amazon Resource Name (ARN) of an SNS topic where notifications are sent when this

            OpsItem is edited or changed.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.OperationalData">

            <summary>

            <para>

            <para>Operational data is custom data that provides useful reference details about the OpsItem.

            For example, you can specify log files, error strings, license keys, troubleshooting

            tips, or other relevant data. You enter operational data as key-value pairs. The key

            has a maximum length of 128 characters. The value has a maximum size of 20 KB.</para><important><para>Operational data keys <i>can't</i> begin with the following: amazon, aws, amzn, ssm,

            /amazon, /aws, /amzn, /ssm.</para></important><para>You can choose to make the data searchable by other users in the account or you can

            restrict search access. Searchable data means that all users with access to the OpsItem

            Overview page (as provided by the <a>DescribeOpsItems</a> API action) can view and

            search on the specified data. Operational data that is not searchable is only viewable

            by users who have access to the OpsItem (as provided by the <a>GetOpsItem</a> API

            action).</para><para>Use the <code>/aws/resources</code> key in OperationalData to specify a related resource

            in the request. Use the <code>/aws/automations</code> key in OperationalData to associate

            an Automation runbook with the OpsItem. To view AWS CLI example commands that use

            these keys, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-creating-OpsItems.html#OpsCenter-manually-create-OpsItems">Creating

            OpsItems manually</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.OpsItemType">

            <summary>

            <para>

            <para>The type of OpsItem to create. Currently, the only valid values are <code>/aws/changerequest</code>

            and <code>/aws/issue</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.PlannedEndTime">

            <summary>

            <para>

            <para>The time specified in a change request for a runbook workflow to end. Currently supported

            only for the OpsItem type <code>/aws/changerequest</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.PlannedStartTime">

            <summary>

            <para>

            <para>The time specified in a change request for a runbook workflow to start. Currently

            supported only for the OpsItem type <code>/aws/changerequest</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Priority">

            <summary>

            <para>

            <para>The importance of this OpsItem in relation to other OpsItems in the system.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.RelatedOpsItem">

            <summary>

            <para>

            <para>One or more OpsItems that share something in common with the current OpsItems. For

            example, related OpsItems can include OpsItems with similar error messages, impacted

            resources, or statuses for the impacted resource.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Severity">

            <summary>

            <para>

            <para>Specify a severity to assign to an OpsItem.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Source">

            <summary>

            <para>

            <para>The origin of the OpsItem, such as Amazon EC2 or Systems Manager.</para><note><para>The source name can't contain the following strings: aws, amazon, and amzn. </para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Tag">

            <summary>

            <para>

            <para>Optional metadata that you assign to a resource. You can restrict access to OpsItems

            by using an inline IAM policy that specifies tags. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-getting-started.html#OpsCenter-getting-started-user-permissions">Getting

            started with OpsCenter</a> in the <i>AWS Systems Manager User Guide</i>.</para><para>Tags use a key-value pair. For example:</para><para><code>Key=Department,Value=Finance</code></para><note><para>To add tags to an existing OpsItem, use the <a>AddTagsToResource</a> action.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Title">

            <summary>

            <para>

            <para>A short heading that describes the nature of the OpsItem and the impacted resource.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'OpsItemId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CreateOpsItemResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.CreateOpsItemResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Title parameter.

            The -PassThru parameter is deprecated, use -Select '^Title' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsItemCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsMetadataCmdlet">

            <summary>

            If you create a new application in Application Manager, Systems Manager calls this

            API action to specify information about the new application, including the application

            type.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsMetadataCmdlet.Metadata">

            <summary>

            <para>

            <para>Metadata for a new Application Manager application. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsMetadataCmdlet.ResourceId">

            <summary>

            <para>

            <para>A resource ID for a new Application Manager application.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsMetadataCmdlet.Tag">

            <summary>

            <para>

            <para>Optional metadata that you assign to a resource. You can specify a maximum of five

            tags for an OpsMetadata object. Tags enable you to categorize a resource in different

            ways, such as by purpose, owner, or environment. For example, you might want to tag

            an OpsMetadata object to identify an environment or target AWS Region. In this case,

            you could specify the following key-value pairs:</para><ul><li><para><code>Key=Environment,Value=Production</code></para></li><li><para><code>Key=Region,Value=us-east-2</code></para></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsMetadataCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'OpsMetadataArn'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CreateOpsMetadataResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.CreateOpsMetadataResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsMetadataCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the ResourceId parameter.

            The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMOpsMetadataCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet">

            <summary>

            Creates a patch baseline.

             <note><para>

            For information about valid key and value pairs in <code>PatchFilters</code> for each

            supported operating system type, see <a href="http://docs.aws.amazon.com/systems-manager/latest/APIReference/API_PatchFilter.html">PatchFilter</a>.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.ApprovedPatch">

            <summary>

            <para>

            <para>A list of explicitly approved patches for the baseline.</para><para>For information about accepted formats for lists of approved patches and rejected

            patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About

            package name formats for approved and rejected patch lists</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.ApprovedPatchesComplianceLevel">

            <summary>

            <para>

            <para>Defines the compliance level for approved patches. When an approved patch is reported

            as missing, this value describes the severity of the compliance violation. The default

            value is UNSPECIFIED.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.ApprovedPatchesEnableNonSecurity">

            <summary>

            <para>

            <para>Indicates whether the list of approved patches includes non-security updates that

            should be applied to the instances. The default value is 'false'. Applies to Linux

            instances only.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.Description">

            <summary>

            <para>

            <para>A description of the patch baseline.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.Name">

            <summary>

            <para>

            <para>The name of the patch baseline.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.OperatingSystem">

            <summary>

            <para>

            <para>Defines the operating system the patch baseline applies to. The Default value is WINDOWS.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.GlobalFilters_PatchFilter">

            <summary>

            <para>

            <para>The set of patch filters that make up the group.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.ApprovalRules_PatchRule">

            <summary>

            <para>

            <para>The rules that make up the rule group.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.RejectedPatch">

            <summary>

            <para>

            <para>A list of explicitly rejected patches for the baseline.</para><para>For information about accepted formats for lists of approved patches and rejected

            patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About

            package name formats for approved and rejected patch lists</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.RejectedPatchesAction">

            <summary>

            <para>

            <para>The action for Patch Manager to take on patches included in the RejectedPackages list.</para><ul><li><para><b>ALLOW_AS_DEPENDENCY</b>: A package in the Rejected patches list is installed only

            if it is a dependency of another package. It is considered compliant with the patch

            baseline, and its status is reported as <i>InstalledOther</i>. This is the default

            action if no option is specified.</para></li><li><para><b>BLOCK</b>: Packages in the RejectedPatches list, and packages that include them

            as dependencies, are not installed under any circumstances. If a package was installed

            before it was added to the Rejected patches list, it is considered non-compliant with

            the patch baseline, and its status is reported as <i>InstalledRejected</i>.</para></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.Source">

            <summary>

            <para>

            <para>Information about the patches to use to update the instances, including target operating

            systems and source repositories. Applies to Linux instances only.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.Tag">

            <summary>

            <para>

            <para>Optional metadata that you assign to a resource. Tags enable you to categorize a resource

            in different ways, such as by purpose, owner, or environment. For example, you might

            want to tag a patch baseline to identify the severity level of patches it specifies

            and the operating system family it applies to. In this case, you could specify the

            following key name/value pairs:</para><ul><li><para><code>Key=PatchSeverity,Value=Critical</code></para></li><li><para><code>Key=OS,Value=Windows</code></para></li></ul><note><para>To add tags to an existing patch baseline, use the <a>AddTagsToResource</a> action.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.ClientToken">

            <summary>

            <para>

            <para>User-provided idempotency token.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'BaselineId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CreatePatchBaselineResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.CreatePatchBaselineResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMPatchBaselineCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet">

            <summary>

            A resource data sync helps you view data from multiple sources in a single location.

            Systems Manager offers two types of resource data sync: <code>SyncToDestination</code>

            and <code>SyncFromSource</code>.

            <para>

            You can configure Systems Manager Inventory to use the <code>SyncToDestination</code>

            type to synchronize Inventory data from multiple AWS Regions to a single S3 bucket.

            For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-inventory-datasync.html">Configuring

            Resource Data Sync for Inventory</a> in the <i>AWS Systems Manager User Guide</i>.

            </para><para>

            You can configure Systems Manager Explorer to use the <code>SyncFromSource</code>

            type to synchronize operational work items (OpsItems) and operational data (OpsData)

            from multiple AWS Regions to a single S3 bucket. This type can synchronize OpsItems

            and OpsData from multiple AWS accounts and Regions or <code>EntireOrganization</code>

            by using AWS Organizations. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/Explorer-resource-data-sync.html">Setting

            up Systems Manager Explorer to display data from multiple accounts and Regions</a>

            in the <i>AWS Systems Manager User Guide</i>.

            </para><para>

            A resource data sync is an asynchronous operation that returns immediately. After

            a successful initial sync is completed, the system continuously syncs data. To check

            the status of a sync, use the <a>ListResourceDataSync</a>.

            </para><note><para>

            By default, data is not encrypted in Amazon S3. We strongly recommend that you enable

            encryption in Amazon S3 to ensure secure data storage. We also recommend that you

            secure access to the Amazon S3 bucket by creating a restrictive bucket policy. 

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.S3Destination_AWSKMSKeyARN">

            <summary>

            <para>

            <para>The ARN of an encryption key for a destination in Amazon S3. Must belong to the same

            Region as the destination S3 bucket.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.S3Destination_BucketName">

            <summary>

            <para>

            <para>The name of the S3 bucket where the aggregated data is stored.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.DestinationDataSharing_DestinationDataSharingType">

            <summary>

            <para>

            <para>The sharing data type. Only <code>Organization</code> is supported.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.SyncSource_EnableAllOpsDataSource">

            <summary>

            <para>

            <para>When you create a resource data sync, if you choose one of the AWS Organizations options,

            then Systems Manager automatically enables all OpsData sources in the selected AWS

            Regions for all AWS accounts in your organization (or in the selected organization

            units). For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/Explorer-resouce-data-sync-multiple-accounts-and-regions.html">About

            multiple account and Region resource data syncs</a> in the <i>AWS Systems Manager

            User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.SyncSource_IncludeFutureRegion">

            <summary>

            <para>

            <para>Whether to automatically synchronize and aggregate data from new AWS Regions when

            those Regions come online.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.AwsOrganizationsSource_OrganizationalUnit">

            <summary>

            <para>

            <para>The AWS Organizations organization units included in the sync.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.AwsOrganizationsSource_OrganizationSourceType">

            <summary>

            <para>

            <para>If an AWS Organization is present, this is either <code>OrganizationalUnits</code>

            or <code>EntireOrganization</code>. For <code>OrganizationalUnits</code>, the data

            is aggregated from a set of organization units. For <code>EntireOrganization</code>,

            the data is aggregated from the entire AWS Organization. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.S3Destination_Prefix">

            <summary>

            <para>

            <para>An Amazon S3 prefix for the bucket.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.S3Destination_Region">

            <summary>

            <para>

            <para>The AWS Region with the S3 bucket targeted by the Resource Data Sync.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.SyncSource_SourceRegion">

            <summary>

            <para>

            <para>The <code>SyncSource</code> AWS Regions included in the resource data sync.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.SyncSource_SourceType">

            <summary>

            <para>

            <para>The type of data source for the resource data sync. <code>SourceType</code> is either

            <code>AwsOrganizations</code> (if an organization is present in AWS Organizations)

            or <code>singleAccountMultiRegions</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.S3Destination_SyncFormat">

            <summary>

            <para>

            <para>A supported sync format. The following format is currently supported: JsonSerDe</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.SyncName">

            <summary>

            <para>

            <para>A name for the configuration.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.SyncType">

            <summary>

            <para>

            <para>Specify <code>SyncToDestination</code> to create a resource data sync that synchronizes

            data to an S3 bucket for Inventory. If you specify <code>SyncToDestination</code>,

            you must provide a value for <code>S3Destination</code>. Specify <code>SyncFromSource</code>

            to synchronize data from a single account and multiple Regions, or multiple AWS accounts

            and Regions, as listed in AWS Organizations for Explorer. If you specify <code>SyncFromSource</code>,

            you must provide a value for <code>SyncSource</code>. The default value is <code>SyncToDestination</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CreateResourceDataSyncResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SyncName parameter.

            The -PassThru parameter is deprecated, use -Select '^SyncName' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.NewSSMResourceDataSyncCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMDefaultPatchBaselineCmdlet">

            <summary>

            Defines the default patch baseline for the relevant operating system.

            <para>

            To reset the AWS predefined patch baseline as the default, specify the full patch

            baseline ARN as the baseline ID value. For example, for CentOS, specify <code>arn:aws:ssm:us-east-2:733109147000:patchbaseline/pb-0574b43a65ea646ed</code>

            instead of <code>pb-0574b43a65ea646ed</code>.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMDefaultPatchBaselineCmdlet.BaselineId">

            <summary>

            <para>

            <para>The ID of the patch baseline that should be the default patch baseline.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMDefaultPatchBaselineCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'BaselineId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.RegisterDefaultPatchBaselineResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.RegisterDefaultPatchBaselineResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMDefaultPatchBaselineCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the BaselineId parameter.

            The -PassThru parameter is deprecated, use -Select '^BaselineId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMDefaultPatchBaselineCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMPatchBaselineForPatchGroupCmdlet">

            <summary>

            Registers a patch baseline for a patch group.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMPatchBaselineForPatchGroupCmdlet.BaselineId">

            <summary>

            <para>

            <para>The ID of the patch baseline to register the patch group with.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMPatchBaselineForPatchGroupCmdlet.PatchGroup">

            <summary>

            <para>

            <para>The name of the patch group that should be registered with the patch baseline.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMPatchBaselineForPatchGroupCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.RegisterPatchBaselineForPatchGroupResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.RegisterPatchBaselineForPatchGroupResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMPatchBaselineForPatchGroupCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the BaselineId parameter.

            The -PassThru parameter is deprecated, use -Select '^BaselineId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMPatchBaselineForPatchGroupCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet">

            <summary>

            Registers a target with a maintenance window.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.Description">

            <summary>

            <para>

            <para>An optional description for the target.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.Name">

            <summary>

            <para>

            <para>An optional name for the target.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.OwnerInformation">

            <summary>

            <para>

            <para>User-provided value that will be included in any CloudWatch events raised while running

            tasks for these targets in this maintenance window.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.ResourceType">

            <summary>

            <para>

            <para>The type of target being registered with the maintenance window.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.Target">

            <summary>

            <para>

            <para>The targets to register with the maintenance window. In other words, the instances

            to run commands on when the maintenance window runs.</para><note><para>If a single maintenance window task is registered with multiple targets, its task

            invocations occur sequentially and not in parallel. If your task must run on multiple

            targets at the same time, register a task for each target individually and assign

            each task the same priority level.</para></note><para>You can specify targets using instance IDs, resource group names, or tags that have

            been applied to instances.</para><para><b>Example 1</b>: Specify instance IDs</para><para><code>Key=InstanceIds,Values=<i>instance-id-1</i>,<i>instance-id-2</i>,<i>instance-id-3</i></code></para><para><b>Example 2</b>: Use tag key-pairs applied to instances</para><para><code>Key=tag:<i>my-tag-key</i>,Values=<i>my-tag-value-1</i>,<i>my-tag-value-2</i></code></para><para><b>Example 3</b>: Use tag-keys applied to instances</para><para><code>Key=tag-key,Values=<i>my-tag-key-1</i>,<i>my-tag-key-2</i></code></para><para><b>Example 4</b>: Use resource group names</para><para><code>Key=resource-groups:Name,Values=<i>resource-group-name</i></code></para><para><b>Example 5</b>: Use filters for resource group types</para><para><code>Key=resource-groups:ResourceTypeFilters,Values=<i>resource-type-1</i>,<i>resource-type-2</i></code></para><note><para>For <code>Key=resource-groups:ResourceTypeFilters</code>, specify resource types in

            the following format</para><para><code>Key=resource-groups:ResourceTypeFilters,Values=<i>AWS::EC2::INSTANCE</i>,<i>AWS::EC2::VPC</i></code></para></note><para>For more information about these examples formats, including the best use case for

            each one, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/mw-cli-tutorial-targets-examples.html">Examples:

            Register targets with a maintenance window</a> in the <i>AWS Systems Manager User

            Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window the target should be registered with.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.ClientToken">

            <summary>

            <para>

            <para>User-provided idempotency token.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowTargetId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.RegisterTargetWithMaintenanceWindowResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.RegisterTargetWithMaintenanceWindowResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTargetWithMaintenanceWindowCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet">

            <summary>

            Adds a new task to a maintenance window.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Lambda_ClientContext">

            <summary>

            <para>

            <para>Pass client-specific information to the Lambda function that you are invoking. You

            can then process the client information in your Lambda function as you choose through

            the context variable.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.CloudWatchOutputConfig_CloudWatchLogGroupName">

            <summary>

            <para>

            <para>The name of the CloudWatch log group where you want to send command output. If you

            don't specify a group name, Systems Manager automatically creates a log group for

            you. The log group uses the following naming format: aws/ssm/<i>SystemsManagerDocumentName</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.CloudWatchOutputConfig_CloudWatchOutputEnabled">

            <summary>

            <para>

            <para>Enables Systems Manager to send command output to CloudWatch Logs.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.RunCommand_Comment">

            <summary>

            <para>

            <para>Information about the commands to run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Description">

            <summary>

            <para>

            <para>An optional description for the task.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.RunCommand_DocumentHash">

            <summary>

            <para>

            <para>The SHA-256 or SHA-1 hash created by the system when the document was created. SHA-1

            hashes have been deprecated.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.RunCommand_DocumentHashType">

            <summary>

            <para>

            <para>SHA-256 or SHA-1. SHA-1 hashes have been deprecated.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Automation_DocumentVersion">

            <summary>

            <para>

            <para>The version of an Automation document to use during task execution.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.RunCommand_DocumentVersion">

            <summary>

            <para>

            <para>The SSM document version to use in the request. You can specify $DEFAULT, $LATEST,

            or a specific version number. If you run commands by using the AWS CLI, then you must

            escape the first two options by using a backslash. If you specify a version number,

            then you don't need to use the backslash. For example:</para><para>--document-version "\$DEFAULT"</para><para>--document-version "\$LATEST"</para><para>--document-version "3"</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.StepFunctions_Input">

            <summary>

            <para>

            <para>The inputs for the STEP_FUNCTIONS task.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.MaxConcurrency">

            <summary>

            <para>

            <para>The maximum number of targets this task can be run for in parallel.</para><note><para>For maintenance window tasks without a target specified, you cannot supply a value

            for this option. Instead, the system inserts a placeholder value of <code>1</code>.

            This value does not affect the running of your task.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.MaxError">

            <summary>

            <para>

            <para>The maximum number of errors allowed before this task stops being scheduled.</para><note><para>For maintenance window tasks without a target specified, you cannot supply a value

            for this option. Instead, the system inserts a placeholder value of <code>1</code>.

            This value does not affect the running of your task.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Name">

            <summary>

            <para>

            <para>An optional name for the task.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.StepFunctions_Name">

            <summary>

            <para>

            <para>The name of the STEP_FUNCTIONS task.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.NotificationConfig_NotificationArn">

            <summary>

            <para>

            <para>An Amazon Resource Name (ARN) for an Amazon Simple Notification Service (Amazon SNS)

            topic. Run Command pushes notifications about command status changes to this topic.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.NotificationConfig_NotificationEvent">

            <summary>

            <para>

            <para>The different events for which you can receive notifications. These events include

            the following: All (events), InProgress, Success, TimedOut, Cancelled, Failed. To

            learn more about these events, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitoring-sns-notifications.html">Monitoring

            Systems Manager status changes using Amazon SNS notifications</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.NotificationConfig_NotificationType">

            <summary>

            <para>

            <para>Command: Receive notification when the status of a command changes. Invocation: For

            commands sent to multiple instances, receive notification on a per-instance basis

            when the status of a command changes. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.RunCommand_OutputS3BucketName">

            <summary>

            <para>

            <para>The name of the S3 bucket.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.RunCommand_OutputS3KeyPrefix">

            <summary>

            <para>

            <para>The S3 bucket subfolder.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Automation_Parameter">

            <summary>

            <para>

            <para>The parameters for the AUTOMATION task.</para><para>For information about specifying and updating task parameters, see <a>RegisterTaskWithMaintenanceWindow</a>

            and <a>UpdateMaintenanceWindowTask</a>.</para><note><para><code>LoggingInfo</code> has been deprecated. To specify an S3 bucket to contain

            logs, instead use the <code>OutputS3BucketName</code> and <code>OutputS3KeyPrefix</code>

            options in the <code>TaskInvocationParameters</code> structure. For information about

            how Systems Manager handles these options for the supported maintenance window task

            types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</para><para><code>TaskParameters</code> has been deprecated. To specify parameters to pass to

            a task when it runs, instead use the <code>Parameters</code> option in the <code>TaskInvocationParameters</code>

            structure. For information about how Systems Manager handles these options for the

            supported maintenance window task types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</para><para>For AUTOMATION task types, Systems Manager ignores any values specified for these

            parameters.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.RunCommand_Parameter">

            <summary>

            <para>

            <para>The parameters for the RUN_COMMAND task execution.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Lambda_Payload">

            <summary>

            <para>

            <para>JSON to provide to your Lambda function as input.</para>

            </para>

            <para>The cmdlet will automatically convert the supplied parameter of type string, string[], System.IO.FileInfo or System.IO.Stream to byte[] before supplying it to the service.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Priority">

            <summary>

            <para>

            <para>The priority of the task in the maintenance window, the lower the number the higher

            the priority. Tasks in a maintenance window are scheduled in priority order with tasks

            that have the same priority scheduled in parallel.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Lambda_Qualifier">

            <summary>

            <para>

            <para>(Optional) Specify a Lambda function version or alias name. If you specify a function

            version, the action uses the qualified function ARN to invoke a specific Lambda function.

            If you specify an alias name, the action uses the alias ARN to invoke the Lambda function

            version to which the alias points.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.LoggingInfo_S3BucketName">

            <summary>

            <para>

            <para>The name of an S3 bucket where execution logs are stored .</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.LoggingInfo_S3KeyPrefix">

            <summary>

            <para>

            <para>(Optional) The S3 bucket subfolder. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.LoggingInfo_S3Region">

            <summary>

            <para>

            <para>The Region where the S3 bucket is located.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.ServiceRoleArn">

            <summary>

            <para>

            <para>The ARN of the IAM service role for Systems Manager to assume when running a maintenance

            window task. If you do not specify a service role ARN, Systems Manager uses your account's

            service-linked role. If no service-linked role for Systems Manager exists in your

            account, it is created when you run <code>RegisterTaskWithMaintenanceWindow</code>.</para><para>For more information, see the following topics in the in the <i>AWS Systems Manager

            User Guide</i>:</para><ul><li><para><a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/using-service-linked-roles.html#slr-permissions">Using

            service-linked roles for Systems Manager</a></para></li><li><para><a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-maintenance-permissions.html#maintenance-window-tasks-service-role">Should

            I use a service-linked role or a custom service role to run maintenance window tasks?

            </a></para></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.RunCommand_ServiceRoleArn">

            <summary>

            <para>

            <para>The ARN of the IAM service role to use to publish Amazon Simple Notification Service

            (Amazon SNS) notifications for maintenance window Run Command tasks.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Target">

            <summary>

            <para>

            <para>The targets (either instances or maintenance window targets).</para><note><para>One or more targets must be specified for maintenance window Run Command-type tasks.

            Depending on the task, targets are optional for other maintenance window task types

            (Automation, AWS Lambda, and AWS Step Functions). For more information about running

            tasks that do not specify targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/maintenance-windows-targetless-tasks.html">Registering

            maintenance window tasks without targets</a> in the <i>AWS Systems Manager User Guide</i>.</para></note><para>Specify instances using the following format: </para><para><code>Key=InstanceIds,Values=&lt;instance-id-1&gt;,&lt;instance-id-2&gt;</code></para><para>Specify maintenance window targets using the following format:</para><para><code>Key=WindowTargetIds,Values=&lt;window-target-id-1&gt;,&lt;window-target-id-2&gt;</code></para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.TaskArn">

            <summary>

            <para>

            <para>The ARN of the task to run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.TaskParameter">

            <summary>

            <para>

            <para>The parameters that should be passed to the task when it is run.</para><note><para><code>TaskParameters</code> has been deprecated. To specify parameters to pass to

            a task when it runs, instead use the <code>Parameters</code> option in the <code>TaskInvocationParameters</code>

            structure. For information about how Systems Manager handles these options for the

            supported maintenance window task types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.TaskType">

            <summary>

            <para>

            <para>The type of task being registered.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.RunCommand_TimeoutSecond">

            <summary>

            <para>

            <para>If this time is reached and the command has not already started running, it doesn't

            run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window the task should be added to.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.ClientToken">

            <summary>

            <para>

            <para>User-provided idempotency token.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowTaskId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.RegisterTaskWithMaintenanceWindowResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.RegisterTaskWithMaintenanceWindowResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the TaskArn parameter.

            The -PassThru parameter is deprecated, use -Select '^TaskArn' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RegisterSSMTaskWithMaintenanceWindowCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMActivationCmdlet">

            <summary>

            Deletes an activation. You are not required to delete an activation. If you delete

            an activation, you can no longer use it to register additional managed instances.

            Deleting an activation does not de-register managed instances. You must manually de-register

            managed instances.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMActivationCmdlet.ActivationId">

            <summary>

            <para>

            <para>The ID of the activation that you want to delete.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMActivationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeleteActivationResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMActivationCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the ActivationId parameter.

            The -PassThru parameter is deprecated, use -Select '^ActivationId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMActivationCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMAssociationCmdlet">

            <summary>

            Disassociates the specified Systems Manager document from the specified instance.

            <para>

            When you disassociate a document from an instance, it does not change the configuration

            of the instance. To change the configuration state of an instance after you disassociate

            a document, you must create a new document with the desired configuration and associate

            it with the instance.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMAssociationCmdlet.AssociationId">

            <summary>

            <para>

            <para>The association ID that you want to delete.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMAssociationCmdlet.InstanceId">

            <summary>

            <para>

            <para>The ID of the instance.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMAssociationCmdlet.Name">

            <summary>

            <para>

            <para>The name of the Systems Manager document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMAssociationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeleteAssociationResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMAssociationCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMAssociationCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMDocumentCmdlet">

            <summary>

            Deletes the Systems Manager document and all instance associations to the document.

            <para>

            Before you delete the document, we recommend that you use <a>DeleteAssociation</a>

            to disassociate all instances that are associated with the document.

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMDocumentCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The version of the document that you want to delete. If not provided, all versions

            of the document are deleted.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMDocumentCmdlet.Enforce">

            <summary>

            <para>

            <para>Some SSM document types require that you specify a <code>Force</code> flag before

            you can delete the document. For example, you must specify a <code>Force</code> flag

            to delete a document of type <code>ApplicationConfigurationSchema</code>. You can

            restrict access to the <code>Force</code> flag in an AWS Identity and Access Management

            (IAM) policy.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMDocumentCmdlet.Name">

            <summary>

            <para>

            <para>The name of the document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMDocumentCmdlet.VersionName">

            <summary>

            <para>

            <para>The version name of the document that you want to delete. If not provided, all versions

            of the document are deleted.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMDocumentCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeleteDocumentResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMDocumentCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMDocumentCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMInventoryCmdlet">

            <summary>

            Delete a custom inventory type or the data associated with a custom Inventory type.

            Deleting a custom inventory type is also referred to as deleting a custom inventory

            schema.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMInventoryCmdlet.DryRun">

            <summary>

            <para>

            <para>Use this option to view a summary of the deletion request without deleting any data

            or the data type. This option is useful when you only want to understand what will

            be deleted. Once you validate that the data to be deleted is what you intend to delete,

            you can run the same command without specifying the <code>DryRun</code> option.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMInventoryCmdlet.SchemaDeleteOption">

            <summary>

            <para>

            <para>Use the <code>SchemaDeleteOption</code> to delete a custom inventory type (schema).

            If you don't choose this option, the system only deletes existing inventory data associated

            with the custom inventory type. Choose one of the following options:</para><para>DisableSchema: If you choose this option, the system ignores all inventory data for

            the specified version, and any earlier versions. To enable this schema again, you

            must call the <code>PutInventory</code> action for a version greater than the disabled

            version.</para><para>DeleteSchema: This option deletes the specified custom type from the Inventory service.

            You can recreate the schema later, if you want.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMInventoryCmdlet.TypeName">

            <summary>

            <para>

            <para>The name of the custom inventory type for which you want to delete either all previously

            collected data or the inventory type itself. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMInventoryCmdlet.ClientToken">

            <summary>

            <para>

            <para>User-provided idempotency token.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMInventoryCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeleteInventoryResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DeleteInventoryResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMInventoryCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the TypeName parameter.

            The -PassThru parameter is deprecated, use -Select '^TypeName' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMInventoryCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMMaintenanceWindowCmdlet">

            <summary>

            Deletes a maintenance window.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMMaintenanceWindowCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window to delete.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMMaintenanceWindowCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeleteMaintenanceWindowResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DeleteMaintenanceWindowResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMMaintenanceWindowCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMMaintenanceWindowCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMOpsMetadataCmdlet">

            <summary>

            Delete OpsMetadata related to an application.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMOpsMetadataCmdlet.OpsMetadataArn">

            <summary>

            <para>

            <para>The Amazon Resource Name (ARN) of an OpsMetadata Object to delete.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMOpsMetadataCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeleteOpsMetadataResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMOpsMetadataCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the OpsMetadataArn parameter.

            The -PassThru parameter is deprecated, use -Select '^OpsMetadataArn' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMOpsMetadataCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCmdlet">

            <summary>

            Delete a parameter from the system.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCmdlet.Name">

            <summary>

            <para>

            <para>The name of the parameter to delete.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeleteParameterResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCollectionCmdlet">

            <summary>

            Delete a list of parameters.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCollectionCmdlet.Name">

            <summary>

            <para>

            <para>The names of the parameters to delete.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCollectionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeleteParametersResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DeleteParametersResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCollectionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMParameterCollectionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMPatchBaselineCmdlet">

            <summary>

            Deletes a patch baseline.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMPatchBaselineCmdlet.BaselineId">

            <summary>

            <para>

            <para>The ID of the patch baseline to delete.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMPatchBaselineCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'BaselineId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeletePatchBaselineResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DeletePatchBaselineResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMPatchBaselineCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the BaselineId parameter.

            The -PassThru parameter is deprecated, use -Select '^BaselineId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMPatchBaselineCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceDataSyncCmdlet">

            <summary>

            Deletes a Resource Data Sync configuration. After the configuration is deleted, changes

            to data on managed instances are no longer synced to or from the target. Deleting

            a sync configuration does not delete data.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceDataSyncCmdlet.SyncName">

            <summary>

            <para>

            <para>The name of the configuration to delete.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceDataSyncCmdlet.SyncType">

            <summary>

            <para>

            <para>Specify the type of resource data sync to delete.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceDataSyncCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeleteResourceDataSyncResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceDataSyncCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SyncName parameter.

            The -PassThru parameter is deprecated, use -Select '^SyncName' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceDataSyncCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceTagCmdlet">

            <summary>

            Removes tag keys from the specified resource.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceTagCmdlet.ResourceId">

            <summary>

            <para>

            <para>The ID of the resource from which you want to remove tags. For example:</para><para>ManagedInstance: mi-012345abcde</para><para>MaintenanceWindow: mw-012345abcde</para><para>PatchBaseline: pb-012345abcde</para><para>OpsMetadata object: <code>ResourceID</code> for tagging is created from the Amazon

            Resource Name (ARN) for the object. Specifically, <code>ResourceID</code> is created

            from the strings that come after the word <code>opsmetadata</code> in the ARN. For

            example, an OpsMetadata object with an ARN of <code>arn:aws:ssm:us-east-2:1234567890:opsmetadata/aws/ssm/MyGroup/appmanager</code>

            has a <code>ResourceID</code> of either <code>aws/ssm/MyGroup/appmanager</code> or

            <code>/aws/ssm/MyGroup/appmanager</code>.</para><para>For the Document and Parameter values, use the name of the resource.</para><note><para>The ManagedInstance type for this API action is only for on-premises managed instances.

            Specify the name of the managed instance in the following format: mi-ID_number. For

            example, mi-1a2b3c4d5e6f.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceTagCmdlet.ResourceType">

            <summary>

            <para>

            <para>The type of resource from which you want to remove a tag.</para><note><para>The ManagedInstance type for this API action is only for on-premises managed instances.

            Specify the name of the managed instance in the following format: mi-ID_number. For

            example, mi-1a2b3c4d5e6f.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceTagCmdlet.TagKey">

            <summary>

            <para>

            <para>Tag keys that you want to remove from the specified resource.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceTagCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.RemoveTagsFromResourceResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceTagCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the ResourceId parameter.

            The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.RemoveSSMResourceTagCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.ResetSSMParameterVersionLabelCmdlet">

            <summary>

            Remove a label or labels from a parameter.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMParameterVersionLabelCmdlet.Label">

            <summary>

            <para>

            <para>One or more labels to delete from the specified parameter version.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMParameterVersionLabelCmdlet.Name">

            <summary>

            <para>

            <para>The parameter name of which you want to delete one or more labels.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMParameterVersionLabelCmdlet.ParameterVersion">

            <summary>

            <para>

            <para>The specific version of the parameter which you want to delete one or more labels

            from. If it is not present, the call will fail.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMParameterVersionLabelCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UnlabelParameterVersionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UnlabelParameterVersionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMParameterVersionLabelCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMParameterVersionLabelCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.ResetSSMServiceSettingCmdlet">

            <summary>

            <code>ServiceSetting</code> is an account-level setting for an AWS service. This

            setting defines how a user interacts with or uses a service or a feature of a service.

            For example, if an AWS service charges money to the account based on feature or service

            usage, then the AWS service team might create a default setting of "false". This means

            the user can't use this feature unless they change the setting to "true" and intentionally

            opt in for a paid feature.

            <para>

            Services map a <code>SettingId</code> object to a setting value. AWS services teams

            define the default value for a <code>SettingId</code>. You can't create a new <code>SettingId</code>,

            but you can overwrite the default value if you have the <code>ssm:UpdateServiceSetting</code>

            permission for the setting. Use the <a>GetServiceSetting</a> API action to view the

            current value. Use the <a>UpdateServiceSetting</a> API action to change the default

            setting. 

            </para><para>

            Reset the service setting for the account to the default value as provisioned by the

            AWS service team. 

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMServiceSettingCmdlet.SettingId">

            <summary>

            <para>

            <para>The Amazon Resource Name (ARN) of the service setting to reset. The setting ID can

            be <code>/ssm/automation/customer-script-log-destination</code>, <code>/ssm/automation/customer-script-log-group-name</code>,

            <code>/ssm/parameter-store/default-parameter-tier</code>, <code>/ssm/parameter-store/high-throughput-enabled</code>,

            or <code>/ssm/managed-instance/activation-tier</code>. For example, <code>arn:aws:ssm:us-east-1:111122223333:servicesetting/ssm/parameter-store/high-throughput-enabled</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMServiceSettingCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'ServiceSetting'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ResetServiceSettingResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ResetServiceSettingResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMServiceSettingCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SettingId parameter.

            The -PassThru parameter is deprecated, use -Select '^SettingId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResetSSMServiceSettingCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.ResumeSSMSessionCmdlet">

            <summary>

            Reconnects a session to an instance after it has been disconnected. Connections can

            be resumed for disconnected sessions, but not terminated sessions.

             <note><para>

            This command is primarily for use by client machines to automatically reconnect during

            intermittent network issues. It is not intended for any other use.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResumeSSMSessionCmdlet.SessionId">

            <summary>

            <para>

            <para>The ID of the disconnected session to resume.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResumeSSMSessionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.ResumeSessionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.ResumeSessionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResumeSSMSessionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SessionId parameter.

            The -PassThru parameter is deprecated, use -Select '^SessionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.ResumeSSMSessionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.SendSSMAutomationSignalCmdlet">

            <summary>

            Sends a signal to an Automation execution to change the current behavior or status

            of the execution.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMAutomationSignalCmdlet.AutomationExecutionId">

            <summary>

            <para>

            <para>The unique identifier for an existing Automation execution that you want to send the

            signal to.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMAutomationSignalCmdlet.Payload">

            <summary>

            <para>

            <para>The data sent with the signal. The data schema depends on the type of signal used

            in the request.</para><para>For <code>Approve</code> and <code>Reject</code> signal types, the payload is an optional

            comment that you can send with the signal type. For example:</para><para><code>Comment="Looks good"</code></para><para>For <code>StartStep</code> and <code>Resume</code> signal types, you must send the

            name of the Automation step to start or resume as the payload. For example:</para><para><code>StepName="step1"</code></para><para>For the <code>StopStep</code> signal type, you must send the step execution ID as

            the payload. For example:</para><para><code>StepExecutionId="97fff367-fc5a-4299-aed8-0123456789ab"</code></para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMAutomationSignalCmdlet.SignalType">

            <summary>

            <para>

            <para>The type of signal to send to an Automation execution. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMAutomationSignalCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.SendAutomationSignalResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMAutomationSignalCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the AutomationExecutionId parameter.

            The -PassThru parameter is deprecated, use -Select '^AutomationExecutionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMAutomationSignalCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet">

            <summary>

            Runs commands on one or more managed instances.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.CloudWatchOutputConfig_CloudWatchLogGroupName">

            <summary>

            <para>

            <para>The name of the CloudWatch log group where you want to send command output. If you

            don't specify a group name, Systems Manager automatically creates a log group for

            you. The log group uses the following naming format: aws/ssm/<i>SystemsManagerDocumentName</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.CloudWatchOutputConfig_CloudWatchOutputEnabled">

            <summary>

            <para>

            <para>Enables Systems Manager to send command output to CloudWatch Logs.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.Comment">

            <summary>

            <para>

            <para>User-specified information about the command, such as a brief description of what

            the command should do.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.DocumentHash">

            <summary>

            <para>

            <para>The Sha256 or Sha1 hash created by the system when the document was created. </para><note><para>Sha1 hashes have been deprecated.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.DocumentHashType">

            <summary>

            <para>

            <para>Sha256 or Sha1.</para><note><para>Sha1 hashes have been deprecated.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.DocumentName">

            <summary>

            <para>

            <para>The name of the Systems Manager document to run. This can be a public document or

            a custom document. To run a shared document belonging to another account, specify

            the document ARN. For more information about how to use shared documents, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/ssm-using-shared.html">Using

            shared SSM documents</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The SSM document version to use in the request. You can specify $DEFAULT, $LATEST,

            or a specific version number. If you run commands by using the AWS CLI, then you must

            escape the first two options by using a backslash. If you specify a version number,

            then you don't need to use the backslash. For example:</para><para>--document-version "\$DEFAULT"</para><para>--document-version "\$LATEST"</para><para>--document-version "3"</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.InstanceId">

            <summary>

            <para>

            <para>The IDs of the instances where the command should run. Specifying instance IDs is

            most useful when you are targeting a limited number of instances, though you can specify

            up to 50 IDs.</para><para>To target a larger number of instances, or if you prefer not to list individual instance

            IDs, we recommend using the <code>Targets</code> option instead. Using <code>Targets</code>,

            which accepts tag key-value pairs to identify the instances to send commands to, you

            can a send command to tens, hundreds, or thousands of instances at once.</para><para>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Using

            targets and rate controls to send commands to a fleet</a> in the <i>AWS Systems Manager

            User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.MaxConcurrency">

            <summary>

            <para>

            <para>(Optional) The maximum number of instances that are allowed to run the command at

            the same time. You can specify a number such as 10 or a percentage such as 10%. The

            default value is 50. For more information about how to use MaxConcurrency, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-velocity">Using

            concurrency controls</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.MaxError">

            <summary>

            <para>

            <para>The maximum number of errors allowed without the command failing. When the command

            fails one more time beyond the value of MaxErrors, the systems stops sending the command

            to additional targets. You can specify a number like 10 or a percentage like 10%.

            The default value is 0. For more information about how to use MaxErrors, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-maxerrors">Using

            error controls</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.NotificationConfig_NotificationArn">

            <summary>

            <para>

            <para>An Amazon Resource Name (ARN) for an Amazon Simple Notification Service (Amazon SNS)

            topic. Run Command pushes notifications about command status changes to this topic.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.NotificationConfig_NotificationEvent">

            <summary>

            <para>

            <para>The different events for which you can receive notifications. These events include

            the following: All (events), InProgress, Success, TimedOut, Cancelled, Failed. To

            learn more about these events, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitoring-sns-notifications.html">Monitoring

            Systems Manager status changes using Amazon SNS notifications</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.NotificationConfig_NotificationType">

            <summary>

            <para>

            <para>Command: Receive notification when the status of a command changes. Invocation: For

            commands sent to multiple instances, receive notification on a per-instance basis

            when the status of a command changes. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.OutputS3BucketName">

            <summary>

            <para>

            <para>The name of the S3 bucket where command execution responses should be stored.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.OutputS3KeyPrefix">

            <summary>

            <para>

            <para>The directory structure within the S3 bucket where the responses should be stored.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.OutputS3Region">

            <summary>

            <para>

            <para>(Deprecated) You can no longer specify this parameter. The system ignores it. Instead,

            Systems Manager automatically determines the Region of the S3 bucket.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.Parameter">

            <summary>

            <para>

            <para>The required and optional parameters specified in the document being run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.ServiceRoleArn">

            <summary>

            <para>

            <para>The ARN of the IAM service role to use to publish Amazon Simple Notification Service

            (Amazon SNS) notifications for Run Command commands.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.Target">

            <summary>

            <para>

            <para>An array of search criteria that targets instances using a <code>Key,Value</code>

            combination that you specify. Specifying targets is most useful when you want to send

            a command to a large number of instances at once. Using <code>Targets</code>, which

            accepts tag key-value pairs to identify instances, you can send a command to tens,

            hundreds, or thousands of instances at once.</para><para>To send a command to a smaller number of instances, you can use the <code>InstanceIds</code>

            option instead.</para><para>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Sending

            commands to a fleet</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.TimeoutSecond">

            <summary>

            <para>

            <para>If this time is reached and the command has not already started running, it will not

            run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Command'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.SendCommandResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.SendCommandResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SendSSMCommandCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.SetSSMParameterVersionLabelCmdlet">

            <summary>

            A parameter label is a user-defined alias to help you manage different versions of

            a parameter. When you modify a parameter, Systems Manager automatically saves a new

            version and increments the version number by one. A label can help you remember the

            purpose of a parameter when there are multiple versions. 

            <para>

            Parameter labels have the following requirements and restrictions.

            </para><ul><li><para>

            A version of a parameter can have a maximum of 10 labels.

            </para></li><li><para>

            You can't attach the same label to different versions of the same parameter. For example,

            if version 1 has the label Production, then you can't attach Production to version

            2.

            </para></li><li><para>

            You can move a label from one version of a parameter to another.

            </para></li><li><para>

            You can't create a label when you create a new parameter. You must attach a label

            to a specific version of a parameter.

            </para></li><li><para>

            If you no longer want to use a parameter label, then you can either delete it or move

            it to a different version of a parameter.

            </para></li><li><para>

            A label can have a maximum of 100 characters.

            </para></li><li><para>

            Labels can contain letters (case sensitive), numbers, periods (.), hyphens (-), or

            underscores (_).

            </para></li><li><para>

            Labels can't begin with a number, "aws," or "ssm" (not case sensitive). If a label

            fails to meet these requirements, then the label is not associated with a parameter

            and the system displays it in the list of InvalidLabels.

            </para></li></ul>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SetSSMParameterVersionLabelCmdlet.Label">

            <summary>

            <para>

            <para>One or more labels to attach to the specified parameter version.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SetSSMParameterVersionLabelCmdlet.Name">

            <summary>

            <para>

            <para>The parameter name on which you want to attach one or more labels.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SetSSMParameterVersionLabelCmdlet.ParameterVersion">

            <summary>

            <para>

            <para>The specific version of the parameter on which you want to attach one or more labels.

            If no version is specified, the system attaches the label to the latest version.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SetSSMParameterVersionLabelCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'InvalidLabels'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.LabelParameterVersionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.LabelParameterVersionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SetSSMParameterVersionLabelCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.SetSSMParameterVersionLabelCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.StartSSMAssociationsOnceCmdlet">

            <summary>

            Use this API action to run an association immediately and only one time. This action

            can be helpful when troubleshooting associations.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAssociationsOnceCmdlet.AssociationId">

            <summary>

            <para>

            <para>The association IDs that you want to run immediately and only one time.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAssociationsOnceCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.StartAssociationsOnceResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAssociationsOnceCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the AssociationId parameter.

            The -PassThru parameter is deprecated, use -Select '^AssociationId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAssociationsOnceCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet">

            <summary>

            Initiates execution of an Automation document.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.DocumentName">

            <summary>

            <para>

            <para>The name of the Systems Manager document to run. This can be a public document or

            a custom document. To run a shared document belonging to another account, specify

            the document ARN. For more information about how to use shared documents, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/ssm-using-shared.html">Using

            shared SSM documents</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The version of the Automation document to use for this execution.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.MaxConcurrency">

            <summary>

            <para>

            <para>The maximum number of targets allowed to run this task in parallel. You can specify

            a number, such as 10, or a percentage, such as 10%. The default value is 10.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.MaxError">

            <summary>

            <para>

            <para>The number of errors that are allowed before the system stops running the automation

            on additional targets. You can specify either an absolute number of errors, for example

            10, or a percentage of the target set, for example 10%. If you specify 3, for example,

            the system stops running the automation when the fourth error is received. If you

            specify 0, then the system stops running the automation on additional targets after

            the first error result is returned. If you run an automation on 50 resources and set

            max-errors to 10%, then the system stops running the automation on additional targets

            when the sixth error is received.</para><para>Executions that are already running an automation when max-errors is reached are allowed

            to complete, but some of these executions may fail as well. If you need to ensure

            that there won't be more than max-errors failed executions, set max-concurrency to

            1 so the executions proceed one at a time.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.Mode">

            <summary>

            <para>

            <para>The execution mode of the automation. Valid modes include the following: Auto and

            Interactive. The default mode is Auto.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.Parameter">

            <summary>

            <para>

            <para>A key-value map of execution parameters, which match the declared parameters in the

            Automation document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.Tag">

            <summary>

            <para>

            <para>Optional metadata that you assign to a resource. You can specify a maximum of five

            tags for an automation. Tags enable you to categorize a resource in different ways,

            such as by purpose, owner, or environment. For example, you might want to tag an automation

            to identify an environment or operating system. In this case, you could specify the

            following key name/value pairs:</para><ul><li><para><code>Key=environment,Value=test</code></para></li><li><para><code>Key=OS,Value=Windows</code></para></li></ul><note><para>To add tags to an existing patch baseline, use the <a>AddTagsToResource</a> action.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.TargetLocation">

            <summary>

            <para>

            <para>A location is a combination of AWS Regions and/or AWS accounts where you want to run

            the Automation. Use this action to start an Automation in multiple Regions and multiple

            accounts. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-automation-multiple-accounts-and-regions.html">Running

            Automation workflows in multiple AWS Regions and accounts</a> in the <i>AWS Systems

            Manager User Guide</i>. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.TargetMap">

            <summary>

            <para>

            <para>A key-value mapping of document parameters to target resources. Both Targets and TargetMaps

            cannot be specified together.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.TargetParameterName">

            <summary>

            <para>

            <para>The name of the parameter used as the target resource for the rate-controlled execution.

            Required if you specify targets.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.Target">

            <summary>

            <para>

            <para>A key-value mapping to target resources. Required if you specify TargetParameterName.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.ClientToken">

            <summary>

            <para>

            <para>User-provided idempotency token. The token must be unique, is case insensitive, enforces

            the UUID format, and can't be reused.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AutomationExecutionId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.StartAutomationExecutionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.StartAutomationExecutionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the DocumentName parameter.

            The -PassThru parameter is deprecated, use -Select '^DocumentName' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMAutomationExecutionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet">

            <summary>

            Creates a change request for Change Manager. The runbooks (Automation documents) specified

            in the change request run only after all required approvals for the change request

            have been received.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.ChangeDetail">

            <summary>

            <para>

            <para>User-provided details about the change. If no details are provided, content specified

            in the <b>Template information</b> section of the associated change template is added.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.ChangeRequestName">

            <summary>

            <para>

            <para>The name of the change request associated with the runbook workflow to be run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.DocumentName">

            <summary>

            <para>

            <para>The name of the change template document to run during the runbook workflow.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The version of the change template document to run during the runbook workflow.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.Parameter">

            <summary>

            <para>

            <para>A key-value map of parameters that match the declared parameters in the change template

            document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.Runbook">

            <summary>

            <para>

            <para>Information about the Automation runbooks (Automation documents) that are run during

            the runbook workflow.</para><note><para>The Automation runbooks specified for the runbook workflow can't run until all required

            approvals for the change request have been received.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.ScheduledEndTime">

            <summary>

            <para>

            <para>The time that the requester expects the runbook workflow related to the change request

            to complete. The time is an estimate only that the requester provides for reviewers.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.ScheduledTime">

            <summary>

            <para>

            <para>The date and time specified in the change request to run the Automation runbooks.</para><note><para>The Automation runbooks specified for the runbook workflow can't run until all required

            approvals for the change request have been received.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.Tag">

            <summary>

            <para>

            <para>Optional metadata that you assign to a resource. You can specify a maximum of five

            tags for a change request. Tags enable you to categorize a resource in different ways,

            such as by purpose, owner, or environment. For example, you might want to tag a change

            request to identify an environment or target AWS Region. In this case, you could specify

            the following key-value pairs:</para><ul><li><para><code>Key=Environment,Value=Production</code></para></li><li><para><code>Key=Region,Value=us-east-2</code></para></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.ClientToken">

            <summary>

            <para>

            <para>The user-provided idempotency token. The token must be unique, is case insensitive,

            enforces the UUID format, and can't be reused.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AutomationExecutionId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.StartChangeRequestExecutionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.StartChangeRequestExecutionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the DocumentName parameter.

            The -PassThru parameter is deprecated, use -Select '^DocumentName' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMChangeRequestExecutionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.StartSSMSessionCmdlet">

            <summary>

            Initiates a connection to a target (for example, an instance) for a Session Manager

            session. Returns a URL and token that can be used to open a WebSocket connection for

            sending input and receiving outputs.

             <note><para>

            AWS CLI usage: <code>start-session</code> is an interactive command that requires

            the Session Manager plugin to be installed on the client machine making the call.

            For information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/session-manager-working-with-install-plugin.html">Install

            the Session Manager plugin for the AWS CLI</a> in the <i>AWS Systems Manager User

            Guide</i>.

            </para><para>

            AWS Tools for PowerShell usage: Start-SSMSession is not currently supported by AWS

            Tools for PowerShell on Windows local machines.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMSessionCmdlet.DocumentName">

            <summary>

            <para>

            <para>The name of the SSM document to define the parameters and plugin settings for the

            session. For example, <code>SSM-SessionManagerRunShell</code>. You can call the <a>GetDocument</a>

            API to verify the document exists before attempting to start a session. If no document

            name is provided, a shell to the instance is launched by default.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMSessionCmdlet.Parameter">

            <summary>

            <para>

            <para>Reserved for future use.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMSessionCmdlet.Target">

            <summary>

            <para>

            <para>The instance to connect to for the session.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMSessionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.StartSessionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.StartSessionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMSessionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the DocumentName parameter.

            The -PassThru parameter is deprecated, use -Select '^DocumentName' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StartSSMSessionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.StopSSMAutomationExecutionCmdlet">

            <summary>

            Stop an Automation that is currently running.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMAutomationExecutionCmdlet.AutomationExecutionId">

            <summary>

            <para>

            <para>The execution ID of the Automation to stop.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMAutomationExecutionCmdlet.Type">

            <summary>

            <para>

            <para>The stop request type. Valid types include the following: Cancel and Complete. The

            default type is Cancel.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMAutomationExecutionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.StopAutomationExecutionResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMAutomationExecutionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the AutomationExecutionId parameter.

            The -PassThru parameter is deprecated, use -Select '^AutomationExecutionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMAutomationExecutionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.StopSSMCommandCmdlet">

            <summary>

            Attempts to cancel the command specified by the Command ID. There is no guarantee

            that the command will be terminated and the underlying process stopped.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMCommandCmdlet.CommandId">

            <summary>

            <para>

            <para>The ID of the command you want to cancel.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMCommandCmdlet.InstanceId">

            <summary>

            <para>

            <para>(Optional) A list of instance IDs on which you want to cancel the command. If not

            provided, the command is canceled on every instance on which it was requested.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMCommandCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CancelCommandResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMCommandCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMCommandCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.StopSSMMaintenanceWindowExecutionCmdlet">

            <summary>

            Stops a maintenance window execution that is already in progress and cancels any tasks

            in the window that have not already starting running. (Tasks already in progress will

            continue to completion.)

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMMaintenanceWindowExecutionCmdlet.WindowExecutionId">

            <summary>

            <para>

            <para>The ID of the maintenance window execution to stop.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMMaintenanceWindowExecutionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'WindowExecutionId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.CancelMaintenanceWindowExecutionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.CancelMaintenanceWindowExecutionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMMaintenanceWindowExecutionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowExecutionId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowExecutionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMMaintenanceWindowExecutionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.StopSSMSessionCmdlet">

            <summary>

            Permanently ends a session and closes the data connection between the Session Manager

            client and SSM Agent on the instance. A terminated session cannot be resumed.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMSessionCmdlet.SessionId">

            <summary>

            <para>

            <para>The ID of the session to terminate.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMSessionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'SessionId'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.TerminateSessionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.TerminateSessionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMSessionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SessionId parameter.

            The -PassThru parameter is deprecated, use -Select '^SessionId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.StopSSMSessionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMManagedInstanceCmdlet">

            <summary>

            Removes the server or virtual machine from the list of registered servers. You can

            reregister the instance again at any time. If you don't plan to use Run Command on

            the server, we suggest uninstalling SSM Agent first.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMManagedInstanceCmdlet.InstanceId">

            <summary>

            <para>

            <para>The ID assigned to the managed instance when you registered it using the activation

            process. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMManagedInstanceCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeregisterManagedInstanceResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMManagedInstanceCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMManagedInstanceCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMPatchBaselineForPatchGroupCmdlet">

            <summary>

            Removes a patch group from a patch baseline.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMPatchBaselineForPatchGroupCmdlet.BaselineId">

            <summary>

            <para>

            <para>The ID of the patch baseline to deregister the patch group from.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMPatchBaselineForPatchGroupCmdlet.PatchGroup">

            <summary>

            <para>

            <para>The name of the patch group that should be deregistered from the patch baseline.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMPatchBaselineForPatchGroupCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeregisterPatchBaselineForPatchGroupResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DeregisterPatchBaselineForPatchGroupResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMPatchBaselineForPatchGroupCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the PatchGroup parameter.

            The -PassThru parameter is deprecated, use -Select '^PatchGroup' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMPatchBaselineForPatchGroupCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTargetFromMaintenanceWindowCmdlet">

            <summary>

            Removes a target from a maintenance window.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTargetFromMaintenanceWindowCmdlet.Safe">

            <summary>

            <para>

            <para>The system checks if the target is being referenced by a task. If the target is being

            referenced, the system returns an error and does not deregister the target from the

            maintenance window.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTargetFromMaintenanceWindowCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window the target should be removed from.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTargetFromMaintenanceWindowCmdlet.WindowTargetId">

            <summary>

            <para>

            <para>The ID of the target definition to remove.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTargetFromMaintenanceWindowCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeregisterTargetFromMaintenanceWindowResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DeregisterTargetFromMaintenanceWindowResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTargetFromMaintenanceWindowCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowTargetId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowTargetId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTargetFromMaintenanceWindowCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTaskFromMaintenanceWindowCmdlet">

            <summary>

            Removes a task from a maintenance window.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTaskFromMaintenanceWindowCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window the task should be removed from.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTaskFromMaintenanceWindowCmdlet.WindowTaskId">

            <summary>

            <para>

            <para>The ID of the task to remove from the maintenance window.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTaskFromMaintenanceWindowCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.DeregisterTaskFromMaintenanceWindowResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.DeregisterTaskFromMaintenanceWindowResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTaskFromMaintenanceWindowCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowTaskId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowTaskId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UnregisterSSMTaskFromMaintenanceWindowCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet">

            <summary>

            Updates an association. You can update the association name and version, the document

            version, schedule, parameters, and Amazon S3 output. 

            <para>

            In order to call this API action, your IAM user account, group, or role must be configured

            with permission to call the <a>DescribeAssociation</a> API action. If you don't have

            permission to call DescribeAssociation, then you receive the following error: <code>An

            error occurred (AccessDeniedException) when calling the UpdateAssociation operation:

            User: &lt;user_arn&gt; is not authorized to perform: ssm:DescribeAssociation on resource:

            &lt;resource_arn&gt;</code></para><important><para>

            When you update an association, the association immediately runs against the specified

            targets.

            </para></important>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.ApplyOnlyAtCronInterval">

            <summary>

            <para>

            <para>By default, when you update an association, the system runs it immediately after it

            is updated and then according to the schedule you specified. Specify this option if

            you don't want an association to run immediately after you update it. This parameter

            is not supported for rate expressions.</para><para>Also, if you specified this option when you created the association, you can reset

            it. To do so, specify the <code>no-apply-only-at-cron-interval</code> parameter when

            you update the association from the command line. This parameter forces the association

            to run immediately after updating it and according to the interval specified.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.AssociationId">

            <summary>

            <para>

            <para>The ID of the association you want to update. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.AssociationName">

            <summary>

            <para>

            <para>The name of the association that you want to update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.AssociationVersion">

            <summary>

            <para>

            <para>This parameter is provided for concurrency control purposes. You must specify the

            latest association version in the service. If you want to ensure that this request

            succeeds, either specify <code>$LATEST</code>, or omit this parameter.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.AutomationTargetParameterName">

            <summary>

            <para>

            <para>Specify the target for the association. This target is required for associations that

            use an Automation document and target resources by using rate controls.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.ComplianceSeverity">

            <summary>

            <para>

            <para>The severity level to assign to the association.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The document version you want update for the association. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.MaxConcurrency">

            <summary>

            <para>

            <para>The maximum number of targets allowed to run the association at the same time. You

            can specify a number, for example 10, or a percentage of the target set, for example

            10%. The default value is 100%, which means all targets run the association at the

            same time.</para><para>If a new instance starts and attempts to run an association while Systems Manager

            is running MaxConcurrency associations, the association is allowed to run. During

            the next association interval, the new instance will process its association within

            the limit specified for MaxConcurrency.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.MaxError">

            <summary>

            <para>

            <para>The number of errors that are allowed before the system stops sending requests to

            run the association on additional targets. You can specify either an absolute number

            of errors, for example 10, or a percentage of the target set, for example 10%. If

            you specify 3, for example, the system stops sending requests when the fourth error

            is received. If you specify 0, then the system stops sending requests after the first

            error is returned. If you run an association on 50 instances and set MaxError to 10%,

            then the system stops sending the request when the sixth error is received.</para><para>Executions that are already running an association when MaxErrors is reached are allowed

            to complete, but some of these executions may fail as well. If you need to ensure

            that there won't be more than max-errors failed executions, set MaxConcurrency to

            1 so that executions proceed one at a time.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.Name">

            <summary>

            <para>

            <para>The name of the SSM document that contains the configuration information for the instance.

            You can specify Command or Automation documents.</para><para>You can specify AWS-predefined documents, documents you created, or a document that

            is shared with you from another account.</para><para>For SSM documents that are shared with you from other AWS accounts, you must specify

            the complete SSM document ARN, in the following format:</para><para><code>arn:aws:ssm:<i>region</i>:<i>account-id</i>:document/<i>document-name</i></code></para><para>For example:</para><para><code>arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document</code></para><para>For AWS-predefined documents and SSM documents you created in your account, you only

            need to specify the document name. For example, <code>AWS-ApplyPatchBaseline</code>

            or <code>My-Document</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.S3Location_OutputS3BucketName">

            <summary>

            <para>

            <para>The name of the S3 bucket.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.S3Location_OutputS3KeyPrefix">

            <summary>

            <para>

            <para>The S3 bucket subfolder.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.S3Location_OutputS3Region">

            <summary>

            <para>

            <para>(Deprecated) You can no longer specify this parameter. The system ignores it. Instead,

            Systems Manager automatically determines the Region of the S3 bucket.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.Parameter">

            <summary>

            <para>

            <para>The parameters you want to update for the association. If you create a parameter using

            Parameter Store, you can reference the parameter using {{ssm:parameter-name}}</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.ScheduleExpression">

            <summary>

            <para>

            <para>The cron expression used to schedule the association that you want to update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.SyncCompliance">

            <summary>

            <para>

            <para>The mode for generating association compliance. You can specify <code>AUTO</code>

            or <code>MANUAL</code>. In <code>AUTO</code> mode, the system uses the status of the

            association execution to determine the compliance status. If the association execution

            runs successfully, then the association is <code>COMPLIANT</code>. If the association

            execution doesn't run successfully, the association is <code>NON-COMPLIANT</code>.</para><para>In <code>MANUAL</code> mode, you must specify the <code>AssociationId</code> as a

            parameter for the <a>PutComplianceItems</a> API action. In this case, compliance data

            is not managed by State Manager. It is managed by your direct call to the <a>PutComplianceItems</a>

            API action.</para><para>By default, all associations use <code>AUTO</code> mode.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.TargetLocation">

            <summary>

            <para>

            <para>A location is a combination of AWS Regions and AWS accounts where you want to run

            the association. Use this action to update an association in multiple Regions and

            multiple accounts.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.Target">

            <summary>

            <para>

            <para>The targets of the association.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AssociationDescription'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateAssociationResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UpdateAssociationResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the AssociationId parameter.

            The -PassThru parameter is deprecated, use -Select '^AssociationId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet">

            <summary>

            Updates the status of the Systems Manager document associated with the specified instance.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet.AssociationStatus_AdditionalInfo">

            <summary>

            <para>

            <para>A user-defined string.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet.AssociationStatus_Date">

            <summary>

            <para>

            <para>The date when the status changed.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet.InstanceId">

            <summary>

            <para>

            <para>The ID of the instance.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet.AssociationStatus_Message">

            <summary>

            <para>

            <para>The reason for the status.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet.AssociationStatus_Name">

            <summary>

            <para>

            <para>The status.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet.Name">

            <summary>

            <para>

            <para>The name of the Systems Manager document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'AssociationDescription'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateAssociationStatusResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UpdateAssociationStatusResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMAssociationStatusCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet">

            <summary>

            Updates one or more values for an SSM document.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.Attachment">

            <summary>

            <para>

            <para>A list of key and value pairs that describe attachments to a version of a document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.Content">

            <summary>

            <para>

            <para>A valid JSON or YAML string.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.DocumentFormat">

            <summary>

            <para>

            <para>Specify the document format for the new document version. Systems Manager supports

            JSON and YAML documents. JSON is the default format.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The version of the document that you want to update. Currently, Systems Manager supports

            updating only the latest version of the document. You can specify the version number

            of the latest version or use the <code>$LATEST</code> variable.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.Name">

            <summary>

            <para>

            <para>The name of the document that you want to update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.TargetType">

            <summary>

            <para>

            <para>Specify a new target type for the document.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.VersionName">

            <summary>

            <para>

            <para>An optional field specifying the version of the artifact you are updating with the

            document. For example, "Release 12, Update 6". This value is unique across all versions

            of a document, and cannot be changed.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'DocumentDescription'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateDocumentResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UpdateDocumentResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Content parameter.

            The -PassThru parameter is deprecated, use -Select '^Content' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentDefaultVersionCmdlet">

            <summary>

            Set the default version of a document.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentDefaultVersionCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The version of a custom document that you want to set as the default version.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentDefaultVersionCmdlet.Name">

            <summary>

            <para>

            <para>The name of a custom document that you want to set as the default version.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentDefaultVersionCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Description'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateDocumentDefaultVersionResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UpdateDocumentDefaultVersionResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentDefaultVersionCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentDefaultVersionCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentMetadataCmdlet">

            <summary>

            Updates information related to approval reviews for a specific version of a document.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentMetadataCmdlet.DocumentReviews_Action">

            <summary>

            <para>

            <para>The action to take on a document approval review request.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentMetadataCmdlet.DocumentReviews_Comment">

            <summary>

            <para>

            <para>A comment entered by a user in your organization about the document review request.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentMetadataCmdlet.DocumentVersion">

            <summary>

            <para>

            <para>The version of a document to update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentMetadataCmdlet.Name">

            <summary>

            <para>

            <para>The name of the document for which a version is to be updated.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentMetadataCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateDocumentMetadataResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentMetadataCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMDocumentMetadataCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet">

            <summary>

            Updates an existing maintenance window. Only specified parameters are modified.

             <note><para>

            The value you specify for <code>Duration</code> determines the specific end time for

            the maintenance window based on the time it begins. No maintenance window tasks are

            permitted to start after the resulting endtime minus the number of hours you specify

            for <code>Cutoff</code>. For example, if the maintenance window starts at 3 PM, the

            duration is three hours, and the value you specify for <code>Cutoff</code> is one

            hour, no maintenance window tasks can start after 5 PM.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.AllowUnassociatedTarget">

            <summary>

            <para>

            <para>Whether targets must be registered with the maintenance window before tasks can be

            defined for those targets.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.Cutoff">

            <summary>

            <para>

            <para>The number of hours before the end of the maintenance window that Systems Manager

            stops scheduling new tasks for execution.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.Description">

            <summary>

            <para>

            <para>An optional description for the update request.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.Duration">

            <summary>

            <para>

            <para>The duration of the maintenance window in hours.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.Enabled">

            <summary>

            <para>

            <para>Whether the maintenance window is enabled.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.EndDate">

            <summary>

            <para>

            <para>The date and time, in ISO-8601 Extended format, for when you want the maintenance

            window to become inactive. EndDate allows you to set a date and time in the future

            when the maintenance window will no longer run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.Name">

            <summary>

            <para>

            <para>The name of the maintenance window.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.Replace">

            <summary>

            <para>

            <para>If True, then all fields that are required by the CreateMaintenanceWindow action are

            also required for this API request. Optional fields that are not specified are set

            to null. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.Schedule">

            <summary>

            <para>

            <para>The schedule of the maintenance window in the form of a cron or rate expression.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.ScheduleOffset">

            <summary>

            <para>

            <para>The number of days to wait after the date and time specified by a CRON expression

            before running the maintenance window.</para><para>For example, the following cron expression schedules a maintenance window to run the

            third Tuesday of every month at 11:30 PM.</para><para><code>cron(30 23 ? * TUE#3 *)</code></para><para>If the schedule offset is <code>2</code>, the maintenance window won't run until two

            days later.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.ScheduleTimezone">

            <summary>

            <para>

            <para>The time zone that the scheduled maintenance window executions are based on, in Internet

            Assigned Numbers Authority (IANA) format. For example: "America/Los_Angeles", "UTC",

            or "Asia/Seoul". For more information, see the <a href="https://www.iana.org/time-zones">Time

            Zone Database</a> on the IANA website.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.StartDate">

            <summary>

            <para>

            <para>The time zone that the scheduled maintenance window executions are based on, in Internet

            Assigned Numbers Authority (IANA) format. For example: "America/Los_Angeles", "UTC",

            or "Asia/Seoul". For more information, see the <a href="https://www.iana.org/time-zones">Time

            Zone Database</a> on the IANA website.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.WindowId">

            <summary>

            <para>

            <para>The ID of the maintenance window to update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateMaintenanceWindowResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UpdateMaintenanceWindowResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet">

            <summary>

            Modifies the target of an existing maintenance window. You can change the following:

             <ul><li><para>

            Name

            </para></li><li><para>

            Description

            </para></li><li><para>

            Owner

            </para></li><li><para>

            IDs for an ID target

            </para></li><li><para>

            Tags for a Tag target

            </para></li><li><para>

            From any supported tag type to another. The three supported tag types are ID target,

            Tag target, and resource group. For more information, see <a>Target</a>.

            </para></li></ul><note><para>

            If a parameter is null, then the corresponding field is not modified.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.Description">

            <summary>

            <para>

            <para>An optional description for the update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.Name">

            <summary>

            <para>

            <para>A name for the update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.OwnerInformation">

            <summary>

            <para>

            <para>User-provided value that will be included in any CloudWatch events raised while running

            tasks for these targets in this maintenance window.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.Replace">

            <summary>

            <para>

            <para>If True, then all fields that are required by the RegisterTargetWithMaintenanceWindow

            action are also required for this API request. Optional fields that are not specified

            are set to null.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.Target">

            <summary>

            <para>

            <para>The targets to add or replace.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.WindowId">

            <summary>

            <para>

            <para>The maintenance window ID with which to modify the target.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.WindowTargetId">

            <summary>

            <para>

            <para>The target ID to modify.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateMaintenanceWindowTargetResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UpdateMaintenanceWindowTargetResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowTargetId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowTargetId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTargetCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet">

            <summary>

            Modifies a task assigned to a maintenance window. You can't change the task type,

            but you can change the following values:

             <ul><li><para>

            TaskARN. For example, you can change a RUN_COMMAND task from AWS-RunPowerShellScript

            to AWS-RunShellScript.

            </para></li><li><para>

            ServiceRoleArn

            </para></li><li><para>

            TaskInvocationParameters

            </para></li><li><para>

            Priority

            </para></li><li><para>

            MaxConcurrency

            </para></li><li><para>

            MaxErrors

            </para></li></ul><note><para>

            One or more targets must be specified for maintenance window Run Command-type tasks.

            Depending on the task, targets are optional for other maintenance window task types

            (Automation, AWS Lambda, and AWS Step Functions). For more information about running

            tasks that do not specify targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/maintenance-windows-targetless-tasks.html">Registering

            maintenance window tasks without targets</a> in the <i>AWS Systems Manager User Guide</i>.

            </para></note><para>

            If the value for a parameter in <code>UpdateMaintenanceWindowTask</code> is null,

            then the corresponding field is not modified. If you set <code>Replace</code> to true,

            then all fields required by the <a>RegisterTaskWithMaintenanceWindow</a> action are

            required for this request. Optional fields that aren't specified are set to null.

            </para><important><para>

            When you update a maintenance window task that has options specified in <code>TaskInvocationParameters</code>,

            you must provide again all the <code>TaskInvocationParameters</code> values that you

            want to retain. The values you do not specify again are removed. For example, suppose

            that when you registered a Run Command task, you specified <code>TaskInvocationParameters</code>

            values for <code>Comment</code>, <code>NotificationConfig</code>, and <code>OutputS3BucketName</code>.

            If you update the maintenance window task and specify only a different <code>OutputS3BucketName</code>

            value, the values for <code>Comment</code> and <code>NotificationConfig</code> are

            removed.

            </para></important>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Lambda_ClientContext">

            <summary>

            <para>

            <para>Pass client-specific information to the Lambda function that you are invoking. You

            can then process the client information in your Lambda function as you choose through

            the context variable.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.CloudWatchOutputConfig_CloudWatchLogGroupName">

            <summary>

            <para>

            <para>The name of the CloudWatch log group where you want to send command output. If you

            don't specify a group name, Systems Manager automatically creates a log group for

            you. The log group uses the following naming format: aws/ssm/<i>SystemsManagerDocumentName</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.CloudWatchOutputConfig_CloudWatchOutputEnabled">

            <summary>

            <para>

            <para>Enables Systems Manager to send command output to CloudWatch Logs.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.RunCommand_Comment">

            <summary>

            <para>

            <para>Information about the commands to run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Description">

            <summary>

            <para>

            <para>The new task description to specify.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.RunCommand_DocumentHash">

            <summary>

            <para>

            <para>The SHA-256 or SHA-1 hash created by the system when the document was created. SHA-1

            hashes have been deprecated.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.RunCommand_DocumentHashType">

            <summary>

            <para>

            <para>SHA-256 or SHA-1. SHA-1 hashes have been deprecated.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Automation_DocumentVersion">

            <summary>

            <para>

            <para>The version of an Automation document to use during task execution.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.RunCommand_DocumentVersion">

            <summary>

            <para>

            <para>The SSM document version to use in the request. You can specify $DEFAULT, $LATEST,

            or a specific version number. If you run commands by using the AWS CLI, then you must

            escape the first two options by using a backslash. If you specify a version number,

            then you don't need to use the backslash. For example:</para><para>--document-version "\$DEFAULT"</para><para>--document-version "\$LATEST"</para><para>--document-version "3"</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.StepFunctions_Input">

            <summary>

            <para>

            <para>The inputs for the STEP_FUNCTIONS task.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.MaxConcurrency">

            <summary>

            <para>

            <para>The new <code>MaxConcurrency</code> value you want to specify. <code>MaxConcurrency</code>

            is the number of targets that are allowed to run this task in parallel.</para><note><para>For maintenance window tasks without a target specified, you cannot supply a value

            for this option. Instead, the system inserts a placeholder value of <code>1</code>,

            which may be reported in the response to this command. This value does not affect

            the running of your task and can be ignored.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.MaxError">

            <summary>

            <para>

            <para>The new <code>MaxErrors</code> value to specify. <code>MaxErrors</code> is the maximum

            number of errors that are allowed before the task stops being scheduled.</para><note><para>For maintenance window tasks without a target specified, you cannot supply a value

            for this option. Instead, the system inserts a placeholder value of <code>1</code>,

            which may be reported in the response to this command. This value does not affect

            the running of your task and can be ignored.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Name">

            <summary>

            <para>

            <para>The new task name to specify.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.StepFunctions_Name">

            <summary>

            <para>

            <para>The name of the STEP_FUNCTIONS task.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.NotificationConfig_NotificationArn">

            <summary>

            <para>

            <para>An Amazon Resource Name (ARN) for an Amazon Simple Notification Service (Amazon SNS)

            topic. Run Command pushes notifications about command status changes to this topic.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.NotificationConfig_NotificationEvent">

            <summary>

            <para>

            <para>The different events for which you can receive notifications. These events include

            the following: All (events), InProgress, Success, TimedOut, Cancelled, Failed. To

            learn more about these events, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitoring-sns-notifications.html">Monitoring

            Systems Manager status changes using Amazon SNS notifications</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.NotificationConfig_NotificationType">

            <summary>

            <para>

            <para>Command: Receive notification when the status of a command changes. Invocation: For

            commands sent to multiple instances, receive notification on a per-instance basis

            when the status of a command changes. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.RunCommand_OutputS3BucketName">

            <summary>

            <para>

            <para>The name of the S3 bucket.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.RunCommand_OutputS3KeyPrefix">

            <summary>

            <para>

            <para>The S3 bucket subfolder.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Automation_Parameter">

            <summary>

            <para>

            <para>The parameters for the AUTOMATION task.</para><para>For information about specifying and updating task parameters, see <a>RegisterTaskWithMaintenanceWindow</a>

            and <a>UpdateMaintenanceWindowTask</a>.</para><note><para><code>LoggingInfo</code> has been deprecated. To specify an S3 bucket to contain

            logs, instead use the <code>OutputS3BucketName</code> and <code>OutputS3KeyPrefix</code>

            options in the <code>TaskInvocationParameters</code> structure. For information about

            how Systems Manager handles these options for the supported maintenance window task

            types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</para><para><code>TaskParameters</code> has been deprecated. To specify parameters to pass to

            a task when it runs, instead use the <code>Parameters</code> option in the <code>TaskInvocationParameters</code>

            structure. For information about how Systems Manager handles these options for the

            supported maintenance window task types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</para><para>For AUTOMATION task types, Systems Manager ignores any values specified for these

            parameters.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.RunCommand_Parameter">

            <summary>

            <para>

            <para>The parameters for the RUN_COMMAND task execution.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Lambda_Payload">

            <summary>

            <para>

            <para>JSON to provide to your Lambda function as input.</para>

            </para>

            <para>The cmdlet will automatically convert the supplied parameter of type string, string[], System.IO.FileInfo or System.IO.Stream to byte[] before supplying it to the service.</para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Priority">

            <summary>

            <para>

            <para>The new task priority to specify. The lower the number, the higher the priority. Tasks

            that have the same priority are scheduled in parallel.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Lambda_Qualifier">

            <summary>

            <para>

            <para>(Optional) Specify a Lambda function version or alias name. If you specify a function

            version, the action uses the qualified function ARN to invoke a specific Lambda function.

            If you specify an alias name, the action uses the alias ARN to invoke the Lambda function

            version to which the alias points.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Replace">

            <summary>

            <para>

            <para>If True, then all fields that are required by the RegisterTaskWithMaintenanceWindow

            action are also required for this API request. Optional fields that are not specified

            are set to null.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.LoggingInfo_S3BucketName">

            <summary>

            <para>

            <para>The name of an S3 bucket where execution logs are stored .</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.LoggingInfo_S3KeyPrefix">

            <summary>

            <para>

            <para>(Optional) The S3 bucket subfolder. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.LoggingInfo_S3Region">

            <summary>

            <para>

            <para>The Region where the S3 bucket is located.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.ServiceRoleArn">

            <summary>

            <para>

            <para>The ARN of the IAM service role for Systems Manager to assume when running a maintenance

            window task. If you do not specify a service role ARN, Systems Manager uses your account's

            service-linked role. If no service-linked role for Systems Manager exists in your

            account, it is created when you run <code>RegisterTaskWithMaintenanceWindow</code>.</para><para>For more information, see the following topics in the in the <i>AWS Systems Manager

            User Guide</i>:</para><ul><li><para><a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/using-service-linked-roles.html#slr-permissions">Using

            service-linked roles for Systems Manager</a></para></li><li><para><a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-maintenance-permissions.html#maintenance-window-tasks-service-role">Should

            I use a service-linked role or a custom service role to run maintenance window tasks?

            </a></para></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.RunCommand_ServiceRoleArn">

            <summary>

            <para>

            <para>The ARN of the IAM service role to use to publish Amazon Simple Notification Service

            (Amazon SNS) notifications for maintenance window Run Command tasks.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Target">

            <summary>

            <para>

            <para>The targets (either instances or tags) to modify. Instances are specified using Key=instanceids,Values=instanceID_1,instanceID_2.

            Tags are specified using Key=tag_name,Values=tag_value. </para><note><para>One or more targets must be specified for maintenance window Run Command-type tasks.

            Depending on the task, targets are optional for other maintenance window task types

            (Automation, AWS Lambda, and AWS Step Functions). For more information about running

            tasks that do not specify targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/maintenance-windows-targetless-tasks.html">Registering

            maintenance window tasks without targets</a> in the <i>AWS Systems Manager User Guide</i>.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.TaskArn">

            <summary>

            <para>

            <para>The task ARN to modify.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.TaskParameter">

            <summary>

            <para>

            <para>The parameters to modify.</para><note><para><code>TaskParameters</code> has been deprecated. To specify parameters to pass to

            a task when it runs, instead use the <code>Parameters</code> option in the <code>TaskInvocationParameters</code>

            structure. For information about how Systems Manager handles these options for the

            supported maintenance window task types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</para></note><para>The map has the following format:</para><para>Key: string, between 1 and 255 characters</para><para>Value: an array of strings, each string is between 1 and 255 characters</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.RunCommand_TimeoutSecond">

            <summary>

            <para>

            <para>If this time is reached and the command has not already started running, it doesn't

            run.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.WindowId">

            <summary>

            <para>

            <para>The maintenance window ID that contains the task to modify.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.WindowTaskId">

            <summary>

            <para>

            <para>The task ID to modify.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateMaintenanceWindowTaskResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UpdateMaintenanceWindowTaskResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the WindowTaskId parameter.

            The -PassThru parameter is deprecated, use -Select '^WindowTaskId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMMaintenanceWindowTaskCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMManagedInstanceRoleCmdlet">

            <summary>

            Changes the Amazon Identity and Access Management (IAM) role that is assigned to the

            on-premises instance or virtual machines (VM). IAM roles are first assigned to these

            hybrid instances during the activation process. For more information, see <a>CreateActivation</a>.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMManagedInstanceRoleCmdlet.IamRole">

            <summary>

            <para>

            <para>The IAM role you want to assign or change.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMManagedInstanceRoleCmdlet.InstanceId">

            <summary>

            <para>

            <para>The ID of the managed instance where you want to update the role.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMManagedInstanceRoleCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateManagedInstanceRoleResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMManagedInstanceRoleCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMManagedInstanceRoleCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet">

            <summary>

            Edit or change an OpsItem. You must have permission in AWS Identity and Access Management

            (IAM) to update an OpsItem. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-getting-started.html">Getting

            started with OpsCenter</a> in the <i>AWS Systems Manager User Guide</i>.

            <para>

            Operations engineers and IT professionals use OpsCenter to view, investigate, and

            remediate operational issues impacting the performance and health of their AWS resources.

            For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter.html">AWS

            Systems Manager OpsCenter</a> in the <i>AWS Systems Manager User Guide</i>. 

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.ActualEndTime">

            <summary>

            <para>

            <para>The time a runbook workflow ended. Currently reported only for the OpsItem type <code>/aws/changerequest</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.ActualStartTime">

            <summary>

            <para>

            <para>The time a runbook workflow started. Currently reported only for the OpsItem type

            <code>/aws/changerequest</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.Category">

            <summary>

            <para>

            <para>Specify a new category for an OpsItem.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.Description">

            <summary>

            <para>

            <para>Update the information about the OpsItem. Provide enough information so that users

            reading this OpsItem for the first time understand the issue. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.Notification">

            <summary>

            <para>

            <para>The Amazon Resource Name (ARN) of an SNS topic where notifications are sent when this

            OpsItem is edited or changed.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.OperationalData">

            <summary>

            <para>

            <para>Add new keys or edit existing key-value pairs of the OperationalData map in the OpsItem

            object.</para><para>Operational data is custom data that provides useful reference details about the OpsItem.

            For example, you can specify log files, error strings, license keys, troubleshooting

            tips, or other relevant data. You enter operational data as key-value pairs. The key

            has a maximum length of 128 characters. The value has a maximum size of 20 KB.</para><important><para>Operational data keys <i>can't</i> begin with the following: amazon, aws, amzn, ssm,

            /amazon, /aws, /amzn, /ssm.</para></important><para>You can choose to make the data searchable by other users in the account or you can

            restrict search access. Searchable data means that all users with access to the OpsItem

            Overview page (as provided by the <a>DescribeOpsItems</a> API action) can view and

            search on the specified data. Operational data that is not searchable is only viewable

            by users who have access to the OpsItem (as provided by the <a>GetOpsItem</a> API

            action).</para><para>Use the <code>/aws/resources</code> key in OperationalData to specify a related resource

            in the request. Use the <code>/aws/automations</code> key in OperationalData to associate

            an Automation runbook with the OpsItem. To view AWS CLI example commands that use

            these keys, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-creating-OpsItems.html#OpsCenter-manually-create-OpsItems">Creating

            OpsItems manually</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.OperationalDataToDelete">

            <summary>

            <para>

            <para>Keys that you want to remove from the OperationalData map.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.OpsItemId">

            <summary>

            <para>

            <para>The ID of the OpsItem.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.PlannedEndTime">

            <summary>

            <para>

            <para>The time specified in a change request for a runbook workflow to end. Currently supported

            only for the OpsItem type <code>/aws/changerequest</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.PlannedStartTime">

            <summary>

            <para>

            <para>The time specified in a change request for a runbook workflow to start. Currently

            supported only for the OpsItem type <code>/aws/changerequest</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.Priority">

            <summary>

            <para>

            <para>The importance of this OpsItem in relation to other OpsItems in the system.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.RelatedOpsItem">

            <summary>

            <para>

            <para>One or more OpsItems that share something in common with the current OpsItems. For

            example, related OpsItems can include OpsItems with similar error messages, impacted

            resources, or statuses for the impacted resource.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.Severity">

            <summary>

            <para>

            <para>Specify a new severity for an OpsItem.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.Status">

            <summary>

            <para>

            <para>The OpsItem status. Status can be <code>Open</code>, <code>In Progress</code>, or

            <code>Resolved</code>. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-working-with-OpsItems.html#OpsCenter-working-with-OpsItems-editing-details">Editing

            OpsItem details</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.Title">

            <summary>

            <para>

            <para>A short heading that describes the nature of the OpsItem and the impacted resource.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateOpsItemResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the OpsItemId parameter.

            The -PassThru parameter is deprecated, use -Select '^OpsItemId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsItemCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsMetadataCmdlet">

            <summary>

            Systems Manager calls this API action when you edit OpsMetadata in Application Manager.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsMetadataCmdlet.KeysToDelete">

            <summary>

            <para>

            <para>The metadata keys to delete from the OpsMetadata object. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsMetadataCmdlet.MetadataToUpdate">

            <summary>

            <para>

            <para>Metadata to add to an OpsMetadata object.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsMetadataCmdlet.OpsMetadataArn">

            <summary>

            <para>

            <para>The Amazon Resoure Name (ARN) of the OpsMetadata Object to update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsMetadataCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'OpsMetadataArn'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateOpsMetadataResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UpdateOpsMetadataResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsMetadataCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the OpsMetadataArn parameter.

            The -PassThru parameter is deprecated, use -Select '^OpsMetadataArn' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMOpsMetadataCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet">

            <summary>

            Modifies an existing patch baseline. Fields not specified in the request are left

            unchanged.

             <note><para>

            For information about valid key and value pairs in <code>PatchFilters</code> for each

            supported operating system type, see <a href="http://docs.aws.amazon.com/systems-manager/latest/APIReference/API_PatchFilter.html">PatchFilter</a>.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.ApprovedPatch">

            <summary>

            <para>

            <para>A list of explicitly approved patches for the baseline.</para><para>For information about accepted formats for lists of approved patches and rejected

            patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About

            package name formats for approved and rejected patch lists</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.ApprovedPatchesComplianceLevel">

            <summary>

            <para>

            <para>Assigns a new compliance severity level to an existing patch baseline.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.ApprovedPatchesEnableNonSecurity">

            <summary>

            <para>

            <para>Indicates whether the list of approved patches includes non-security updates that

            should be applied to the instances. The default value is 'false'. Applies to Linux

            instances only.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.BaselineId">

            <summary>

            <para>

            <para>The ID of the patch baseline to update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.Description">

            <summary>

            <para>

            <para>A description of the patch baseline.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.Name">

            <summary>

            <para>

            <para>The name of the patch baseline.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.GlobalFilters_PatchFilter">

            <summary>

            <para>

            <para>The set of patch filters that make up the group.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.ApprovalRules_PatchRule">

            <summary>

            <para>

            <para>The rules that make up the rule group.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.RejectedPatch">

            <summary>

            <para>

            <para>A list of explicitly rejected patches for the baseline.</para><para>For information about accepted formats for lists of approved patches and rejected

            patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About

            package name formats for approved and rejected patch lists</a> in the <i>AWS Systems

            Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.RejectedPatchesAction">

            <summary>

            <para>

            <para>The action for Patch Manager to take on patches included in the RejectedPackages list.</para><ul><li><para><b>ALLOW_AS_DEPENDENCY</b>: A package in the Rejected patches list is installed only

            if it is a dependency of another package. It is considered compliant with the patch

            baseline, and its status is reported as <i>InstalledOther</i>. This is the default

            action if no option is specified.</para></li><li><para><b>BLOCK</b>: Packages in the RejectedPatches list, and packages that include them

            as dependencies, are not installed under any circumstances. If a package was installed

            before it was added to the Rejected patches list, it is considered non-compliant with

            the patch baseline, and its status is reported as <i>InstalledRejected</i>.</para></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.Replace">

            <summary>

            <para>

            <para>If True, then all fields that are required by the CreatePatchBaseline action are also

            required for this API request. Optional fields that are not specified are set to null.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.Source">

            <summary>

            <para>

            <para>Information about the patches to use to update the instances, including target operating

            systems and source repositories. Applies to Linux instances only.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is '*'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdatePatchBaselineResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.UpdatePatchBaselineResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the BaselineId parameter.

            The -PassThru parameter is deprecated, use -Select '^BaselineId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMPatchBaselineCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet">

            <summary>

            Update a resource data sync. After you create a resource data sync for a Region, you

            can't change the account options for that sync. For example, if you create a sync

            in the us-east-2 (Ohio) Region and you choose the Include only the current account

            option, you can't edit that sync later and choose the Include all accounts from my

            AWS Organizations configuration option. Instead, you must delete the first resource

            data sync, and create a new one.

             <note><para>

            This API action only supports a resource data sync that was created with a SyncFromSource

            <code>SyncType</code>.

            </para></note>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.SyncSource_EnableAllOpsDataSource">

            <summary>

            <para>

            <para>When you create a resource data sync, if you choose one of the AWS Organizations options,

            then Systems Manager automatically enables all OpsData sources in the selected AWS

            Regions for all AWS accounts in your organization (or in the selected organization

            units). For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/Explorer-resouce-data-sync-multiple-accounts-and-regions.html">About

            multiple account and Region resource data syncs</a> in the <i>AWS Systems Manager

            User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.SyncSource_IncludeFutureRegion">

            <summary>

            <para>

            <para>Whether to automatically synchronize and aggregate data from new AWS Regions when

            those Regions come online.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.AwsOrganizationsSource_OrganizationalUnit">

            <summary>

            <para>

            <para>The AWS Organizations organization units included in the sync.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.AwsOrganizationsSource_OrganizationSourceType">

            <summary>

            <para>

            <para>If an AWS Organization is present, this is either <code>OrganizationalUnits</code>

            or <code>EntireOrganization</code>. For <code>OrganizationalUnits</code>, the data

            is aggregated from a set of organization units. For <code>EntireOrganization</code>,

            the data is aggregated from the entire AWS Organization. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.SyncSource_SourceRegion">

            <summary>

            <para>

            <para>The <code>SyncSource</code> AWS Regions included in the resource data sync.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.SyncSource_SourceType">

            <summary>

            <para>

            <para>The type of data source for the resource data sync. <code>SourceType</code> is either

            <code>AwsOrganizations</code> (if an organization is present in AWS Organizations)

            or <code>singleAccountMultiRegions</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.SyncName">

            <summary>

            <para>

            <para>The name of the resource data sync you want to update.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.SyncType">

            <summary>

            <para>

            <para>The type of resource data sync. The supported <code>SyncType</code> is SyncFromSource.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateResourceDataSyncResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SyncName parameter.

            The -PassThru parameter is deprecated, use -Select '^SyncName' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMResourceDataSyncCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMServiceSettingCmdlet">

            <summary>

            <code>ServiceSetting</code> is an account-level setting for an AWS service. This

            setting defines how a user interacts with or uses a service or a feature of a service.

            For example, if an AWS service charges money to the account based on feature or service

            usage, then the AWS service team might create a default setting of "false". This means

            the user can't use this feature unless they change the setting to "true" and intentionally

            opt in for a paid feature.

            <para>

            Services map a <code>SettingId</code> object to a setting value. AWS services teams

            define the default value for a <code>SettingId</code>. You can't create a new <code>SettingId</code>,

            but you can overwrite the default value if you have the <code>ssm:UpdateServiceSetting</code>

            permission for the setting. Use the <a>GetServiceSetting</a> API action to view the

            current value. Or, use the <a>ResetServiceSetting</a> to change the value back to

            the original value defined by the AWS service team.

            </para><para>

            Update the service setting for the account. 

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMServiceSettingCmdlet.SettingId">

            <summary>

            <para>

            <para>The Amazon Resource Name (ARN) of the service setting to reset. For example, <code>arn:aws:ssm:us-east-1:111122223333:servicesetting/ssm/parameter-store/high-throughput-enabled</code>.

            The setting ID can be one of the following.</para><ul><li><para><code>/ssm/automation/customer-script-log-destination</code></para></li><li><para><code>/ssm/automation/customer-script-log-group-name</code></para></li><li><para><code>/ssm/parameter-store/default-parameter-tier</code></para></li><li><para><code>/ssm/parameter-store/high-throughput-enabled</code></para></li><li><para><code>/ssm/managed-instance/activation-tier</code></para></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMServiceSettingCmdlet.SettingValue">

            <summary>

            <para>

            <para>The new value to specify for the service setting. For the <code>/ssm/parameter-store/default-parameter-tier</code>

            setting ID, the setting value can be one of the following.</para><ul><li><para>Standard</para></li><li><para>Advanced</para></li><li><para>Intelligent-Tiering</para></li></ul><para>For the <code>/ssm/parameter-store/high-throughput-enabled</code>, and <code>/ssm/managed-instance/activation-tier</code>

            setting IDs, the setting value can be true or false.</para><para>For the <code>/ssm/automation/customer-script-log-destination</code> setting ID, the

            setting value can be CloudWatch.</para><para>For the <code>/ssm/automation/customer-script-log-group-name</code> setting ID, the

            setting value can be the name of a CloudWatch Logs log group.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMServiceSettingCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.UpdateServiceSettingResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMServiceSettingCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the SettingId parameter.

            The -PassThru parameter is deprecated, use -Select '^SettingId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.UpdateSSMServiceSettingCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet">

            <summary>

            Registers a compliance type and other compliance details on a designated resource.

            This action lets you register custom compliance details with a resource. This call

            overwrites existing compliance information on the resource, so you must provide a

            full list of compliance items each time that you send the request.

            <para>

            ComplianceType can be one of the following:

            </para><ul><li><para>

            ExecutionId: The execution ID when the patch, association, or custom compliance item

            was applied.

            </para></li><li><para>

            ExecutionType: Specify patch, association, or Custom:<code>string</code>.

            </para></li><li><para>

            ExecutionTime. The time the patch, association, or custom compliance item was applied

            to the instance.

            </para></li><li><para>

            Id: The patch, association, or custom compliance ID.

            </para></li><li><para>

            Title: A title.

            </para></li><li><para>

            Status: The status of the compliance item. For example, <code>approved</code> for

            patches, or <code>Failed</code> for associations.

            </para></li><li><para>

            Severity: A patch severity. For example, <code>critical</code>.

            </para></li><li><para>

            DocumentName: A SSM document name. For example, AWS-RunPatchBaseline.

            </para></li><li><para>

            DocumentVersion: An SSM document version number. For example, 4.

            </para></li><li><para>

            Classification: A patch classification. For example, <code>security updates</code>.

            </para></li><li><para>

            PatchBaselineId: A patch baseline ID.

            </para></li><li><para>

            PatchSeverity: A patch severity. For example, <code>Critical</code>.

            </para></li><li><para>

            PatchState: A patch state. For example, <code>InstancesWithFailedPatches</code>.

            </para></li><li><para>

            PatchGroup: The name of a patch group.

            </para></li><li><para>

            InstalledTime: The time the association, patch, or custom compliance item was applied

            to the resource. Specify the time by using the following format: yyyy-MM-dd'T'HH:mm:ss'Z'

            </para></li></ul>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.ComplianceType">

            <summary>

            <para>

            <para>Specify the compliance type. For example, specify Association (for a State Manager

            association), Patch, or Custom:<code>string</code>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.ExecutionSummary_ExecutionId">

            <summary>

            <para>

            <para>An ID created by the system when <code>PutComplianceItems</code> was called. For example,

            <code>CommandID</code> is a valid execution ID. You can use this ID in subsequent

            calls.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.ExecutionSummary_ExecutionTime">

            <summary>

            <para>

            <para>The time the execution ran as a datetime object that is saved in the following format:

            yyyy-MM-dd'T'HH:mm:ss'Z'.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.ExecutionSummary_ExecutionType">

            <summary>

            <para>

            <para>The type of execution. For example, <code>Command</code> is a valid execution type.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.ItemContentHash">

            <summary>

            <para>

            <para>MD5 or SHA-256 content hash. The content hash is used to determine if existing information

            should be overwritten or ignored. If the content hashes match, the request to put

            compliance information is ignored.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.Item">

            <summary>

            <para>

            <para>Information about the compliance as defined by the resource type. For example, for

            a patch compliance type, <code>Items</code> includes information about the PatchSeverity,

            Classification, and so on.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.ResourceId">

            <summary>

            <para>

            <para>Specify an ID for this resource. For a managed instance, this is the instance ID.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.ResourceType">

            <summary>

            <para>

            <para>Specify the type of resource. <code>ManagedInstance</code> is currently the only supported

            resource type.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.UploadType">

            <summary>

            <para>

            <para>The mode for uploading compliance items. You can specify <code>COMPLETE</code> or

            <code>PARTIAL</code>. In <code>COMPLETE</code> mode, the system overwrites all existing

            compliance information for the resource. You must provide a full list of compliance

            items each time you send the request.</para><para>In <code>PARTIAL</code> mode, the system overwrites compliance information for a specific

            association. The association must be configured with <code>SyncCompliance</code> set

            to <code>MANUAL</code>. By default, all requests use <code>COMPLETE</code> mode.</para><note><para>This attribute is only valid for association compliance.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.PutComplianceItemsResponse).

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the ResourceId parameter.

            The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMComplianceItemCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.WriteSSMInventoryCmdlet">

            <summary>

            Bulk update custom inventory items on one more instance. The request adds an inventory

            item, if it doesn't already exist, or updates an inventory item, if it does exist.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMInventoryCmdlet.InstanceId">

            <summary>

            <para>

            <para>An instance ID where you want to add or update inventory items.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMInventoryCmdlet.Item">

            <summary>

            <para>

            <para>The inventory items that you want to add or update on instances.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMInventoryCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Message'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.PutInventoryResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.PutInventoryResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMInventoryCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the InstanceId parameter.

            The -PassThru parameter is deprecated, use -Select '^InstanceId' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMInventoryCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

        <member name="T:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet">

            <summary>

            Add a parameter to the system.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.AllowedPattern">

            <summary>

            <para>

            <para>A regular expression used to validate the parameter value. For example, for String

            types with values restricted to numbers, you can specify the following: AllowedPattern=^\d+$

            </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.DataType">

            <summary>

            <para>

            <para>The data type for a <code>String</code> parameter. Supported data types include plain

            text and Amazon Machine Image IDs.</para><para><b>The following data type values are supported.</b></para><ul><li><para><code>text</code></para></li><li><para><code>aws:ec2:image</code></para></li></ul><para>When you create a <code>String</code> parameter and specify <code>aws:ec2:image</code>,

            Systems Manager validates the parameter value is in the required format, such as <code>ami-12345abcdeEXAMPLE</code>,

            and that the specified AMI is available in your AWS account. For more information,

            see <a href="http://docs.aws.amazon.com/systems-manager/latest/userguide/parameter-store-ec2-aliases.html">Native

            parameter support for Amazon Machine Image IDs</a> in the <i>AWS Systems Manager User

            Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Description">

            <summary>

            <para>

            <para>Information about the parameter that you want to add to the system. Optional but recommended.</para><important><para>Do not enter personally identifiable information in this field.</para></important>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.KeyId">

            <summary>

            <para>

            <para>The KMS Key ID that you want to use to encrypt a parameter. Either the default AWS

            Key Management Service (AWS KMS) key automatically assigned to your AWS account or

            a custom key. Required for parameters that use the <code>SecureString</code> data

            type.</para><para>If you don't specify a key ID, the system uses the default key associated with your

            AWS account.</para><ul><li><para>To use your default AWS KMS key, choose the <code>SecureString</code> data type, and

            do <i>not</i> specify the <code>Key ID</code> when you create the parameter. The system

            automatically populates <code>Key ID</code> with your default KMS key.</para></li><li><para>To use a custom KMS key, choose the <code>SecureString</code> data type with the <code>Key

            ID</code> parameter.</para></li></ul>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Name">

            <summary>

            <para>

            <para>The fully qualified name of the parameter that you want to add to the system. The

            fully qualified name includes the complete hierarchy of the parameter path and name.

            For parameters in a hierarchy, you must include a leading forward slash character

            (/) when you create or reference a parameter. For example: <code>/Dev/DBServer/MySQL/db-string13</code></para><para>Naming Constraints:</para><ul><li><para>Parameter names are case sensitive.</para></li><li><para>A parameter name must be unique within an AWS Region</para></li><li><para>A parameter name can't be prefixed with "aws" or "ssm" (case-insensitive).</para></li><li><para>Parameter names can include only the following symbols and letters: <code>a-zA-Z0-9_.-</code></para><para>In addition, the slash character ( / ) is used to delineate hierarchies in parameter

            names. For example: <code>/Dev/Production/East/Project-ABC/MyParameter</code></para></li><li><para>A parameter name can't include spaces.</para></li><li><para>Parameter hierarchies are limited to a maximum depth of fifteen levels.</para></li></ul><para>For additional information about valid values for parameter names, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-paramstore-su-create.html">Creating

            Systems Manager parameters</a> in the <i>AWS Systems Manager User Guide</i>.</para><note><para>The maximum length constraint listed below includes capacity for additional system

            attributes that are not part of the name. The maximum length for a parameter name,

            including the full length of the parameter ARN, is 1011 characters. For example, the

            length of the following parameter name is 65 characters, not 20 characters:</para><para><code>arn:aws:ssm:us-east-2:111122223333:parameter/ExampleParameterName</code></para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Overwrite">

            <summary>

            <para>

            <para>Overwrite an existing parameter. The default value is 'false'.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Policy">

            <summary>

            <para>

            <para>One or more policies to apply to a parameter. This action takes a JSON array. Parameter

            Store supports the following policy types:</para><para>Expiration: This policy deletes the parameter after it expires. When you create the

            policy, you specify the expiration date. You can update the expiration date and time

            by updating the policy. Updating the <i>parameter</i> does not affect the expiration

            date and time. When the expiration time is reached, Parameter Store deletes the parameter.</para><para>ExpirationNotification: This policy triggers an event in Amazon CloudWatch Events

            that notifies you about the expiration. By using this policy, you can receive notification

            before or after the expiration time is reached, in units of days or hours.</para><para>NoChangeNotification: This policy triggers a CloudWatch event if a parameter has not

            been modified for a specified period of time. This policy type is useful when, for

            example, a secret needs to be changed within a period of time, but it has not been

            changed.</para><para>All existing policies are preserved until you send new policies or an empty policy.

            For more information about parameter policies, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/parameter-store-policies.html">Assigning

            parameter policies</a>. </para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Tag">

            <summary>

            <para>

            <para>Optional metadata that you assign to a resource. Tags enable you to categorize a resource

            in different ways, such as by purpose, owner, or environment. For example, you might

            want to tag a Systems Manager parameter to identify the type of resource to which

            it applies, the environment, or the type of configuration data referenced by the parameter.

            In this case, you could specify the following key name/value pairs:</para><ul><li><para><code>Key=Resource,Value=S3bucket</code></para></li><li><para><code>Key=OS,Value=Windows</code></para></li><li><para><code>Key=ParameterType,Value=LicenseKey</code></para></li></ul><note><para>To add tags to an existing Systems Manager parameter, use the <a>AddTagsToResource</a>

            action.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Tier">

            <summary>

            <para>

            <para>The parameter tier to assign to a parameter.</para><para>Parameter Store offers a standard tier and an advanced tier for parameters. Standard

            parameters have a content size limit of 4 KB and can't be configured to use parameter

            policies. You can create a maximum of 10,000 standard parameters for each Region in

            an AWS account. Standard parameters are offered at no additional cost. </para><para>Advanced parameters have a content size limit of 8 KB and can be configured to use

            parameter policies. You can create a maximum of 100,000 advanced parameters for each

            Region in an AWS account. Advanced parameters incur a charge. For more information,

            see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/parameter-store-advanced-parameters.html">Standard

            and advanced parameter tiers</a> in the <i>AWS Systems Manager User Guide</i>.</para><para>You can change a standard parameter to an advanced parameter any time. But you can't

            revert an advanced parameter to a standard parameter. Reverting an advanced parameter

            to a standard parameter would result in data loss because the system would truncate

            the size of the parameter from 8 KB to 4 KB. Reverting would also remove any policies

            attached to the parameter. Lastly, advanced parameters use a different form of encryption

            than standard parameters. </para><para>If you no longer need an advanced parameter, or if you no longer want to incur charges

            for an advanced parameter, you must delete it and recreate it as a new standard parameter.

            </para><para><b>Using the Default Tier Configuration</b></para><para>In <code>PutParameter</code> requests, you can specify the tier to create the parameter

            in. Whenever you specify a tier in the request, Parameter Store creates or updates

            the parameter according to that request. However, if you do not specify a tier in

            a request, Parameter Store assigns the tier based on the current Parameter Store default

            tier configuration.</para><para>The default tier when you begin using Parameter Store is the standard-parameter tier.

            If you use the advanced-parameter tier, you can specify one of the following as the

            default:</para><ul><li><para><b>Advanced</b>: With this option, Parameter Store evaluates all requests as advanced

            parameters. </para></li><li><para><b>Intelligent-Tiering</b>: With this option, Parameter Store evaluates each request

            to determine if the parameter is standard or advanced. </para><para>If the request doesn't include any options that require an advanced parameter, the

            parameter is created in the standard-parameter tier. If one or more options requiring

            an advanced parameter are included in the request, Parameter Store create a parameter

            in the advanced-parameter tier.</para><para>This approach helps control your parameter-related costs by always creating standard

            parameters unless an advanced parameter is necessary. </para></li></ul><para>Options that require an advanced parameter include the following:</para><ul><li><para>The content size of the parameter is more than 4 KB.</para></li><li><para>The parameter uses a parameter policy.</para></li><li><para>More than 10,000 parameters already exist in your AWS account in the current Region.</para></li></ul><para>For more information about configuring the default tier option, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/ps-default-tier.html">Specifying

            a default parameter tier</a> in the <i>AWS Systems Manager User Guide</i>.</para>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Type">

            <summary>

            <para>

            <para>The type of parameter that you want to add to the system.</para><note><para><code>SecureString</code> is not currently supported for AWS CloudFormation templates.</para></note><para>Items in a <code>StringList</code> must be separated by a comma (,). You can't use

            other punctuation or special character to escape items in the list. If you have a

            parameter value that requires a comma, then use the <code>String</code> data type.</para><important><para>Specifying a parameter type is not required when updating a parameter. You must specify

            a parameter type when creating a parameter.</para></important>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Value">

            <summary>

            <para>

            <para>The parameter value that you want to add to the system. Standard parameters have a

            value limit of 4 KB. Advanced parameters have a value limit of 8 KB.</para><note><para>Parameters can't be referenced or nested in the values of other parameters. You can't

            include <code>{{}}</code> or <code>{{ssm:<i>parameter-name</i>}}</code> in a parameter

            value.</para></note>

            </para>

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Select">

            <summary>

            Use the -Select parameter to control the cmdlet output. The default value is 'Version'.

            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleSystemsManagement.Model.PutParameterResponse).

            Specifying the name of a property of type Amazon.SimpleSystemsManagement.Model.PutParameterResponse will result in that property being returned.

            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.PassThru">

            <summary>

            Changes the cmdlet behavior to return the value passed to the Name parameter.

            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.

            </summary>

        </member>

        <member name="P:Amazon.PowerShell.Cmdlets.SSM.WriteSSMParameterCmdlet.Force">

            <summary>

            This parameter overrides confirmation prompts to force 

            the cmdlet to continue its operation. This parameter should always

            be used with caution.

            </summary>

        </member>

    </members>

</doc>